Search Results

Search found 48844 results on 1954 pages for 'first steps'.

Page 537/1954 | < Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544  | Next Page >

  • Can not connect remotely to MySQL Server on Ubuntu 10.10

    - by BobFranz
    Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

    Read the article

  • Force Installing a Radeon HD 2100 on Windows 8

    - by Click Ok
    I'm trying force installing a Radeon HD 2100 on Windows 8. I've found that link from AMD with the drivers for Windows7: http://support.amd.com/us/gpudownload/windows/legacy/Pages/legacy-radeonaiw-vista64.aspx I know too that AMD will stop support Radeon HD 400 and older: http://www.techspot.com/news/48321-amd-drops-windows-8-support-for-radeon-hd-4000-and-older.html Now, let's go to the problem. If I try install the 12.6 driver, Windows will stick with the "basic display adapter", and this is bad for 3d games like Minecraft, that runs really slow now compared with the previous Windows7 installation. Forcing install the catalyst driver can help to fix it. So, I follow that steps: Extract the Catalist Driver (C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql) Right click the "basic display adapter" on device manager, and "update driver" Search on PC I will choose the driver "With Disk" "C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql\Packages\Drivers\Display\W76A_INF" There is a big list of drivers and the nearest driver to HD 2100 is "Radeon HD 2350 Series" My questions: Why isn't "Radeon HD 2100 Series" listed? (or Where is it listed?) In theory it must be listed" The first link above show that "This article applies to the following configuration(s):" (...) "AMD Radeon HD 2000 Series" Am I doing something wrong?

    Read the article

  • Default sending all mails from the one account on Outlook 2007

    - by user45774
    I have two email accounts configured on my outlook 2007. One account is connecting to my exchange server which is the default I have another account connecting to my gmail. I want to by default send or reply all the emails that I receive on my gmail account through my exchange server account only. When I try replying to the email that I receive from the gmail account it gets defaulted to the same (gmail account). I need to manually change it to exchange server account. I want that to be changed to exchange server account by default for all the mails that I send or reply to. I don't want to do the manual process mentioned below in steps: Step 1: In the message window, click Account. Step 2: Click the account that you want to use. Is there a way to set the exchange server account for sending and replying to all emails on outlook irrespective of the number of accounts that I have on outlook. I have my outlook installed on a windows 2003 server.

    Read the article

  • Oracle Linux screen freezes during installation

    - by Fearless
    I was installing Oracle Linux 6.4 on a server, and the screen suddenly froze. Here were the previous steps: I put in the disk, clicked install, checked the disk (no errors), did pre-install setup (clock, root password, host+domain name, etc.), configured two 40GB hard drives in a RAID1 array (no swap, 3100mb encrypted raid partitions, ~100mb ext4 partition mounting to /boot, encrypted ext4 RAID device with mounting to /), selected packages, hit continue. The system did its short preinstall processes, then when to the main installation screen with the long status bar. The installer proceeded like always, but around package 250 out of ~1000, the screen suddenly went black with a text cursor in the upper left corner of the screen and the mouse cursor in its previous place. Neither cursor moved and the only thing that triggered a response was a ctrl-alt-delete that rebooted it. I have run this in VMs before without this issue. Memtest hasn't reported anything, and the media check went smoothly. The machine has supported Ubuntu server without issues before. Any ideas? I have tried booting after that, but the grub bootloader tries to find fd0 for some reason (I have no idea why it would search for the floppy disk). UPDATE My server successfully installed, but won't boot up. I think that, for some reason, it is still using the old bootloader from the previous installation. Any ideas on how to fix that?

    Read the article

  • Autossh startup on Ubuntu 10.04 - fails after powering off

    - by grant
    I'm using upstart to keep a reverse ssh tunnel alive using auto ssh similar to Using Upstart to Manage AutoSSH Reverse Tunnel. This works fine, except after a manual power down I can no longer connect to the machine through the "central server" using the tunnel. I receive "ssh_exchange_identification: Connection closed by remote host". The autossh process is running on the client. I can connect again after re-starting networking. I'm trying to figure out why this is failing consistently after a manual shutdown. Is it possible that I need to do some cleanup on startup that would allow the tunnel to work in this situation, or are there some other debugging/troubleshooting steps I can take to determine the problem? Machine A is the client machine, using autossh. This machine sits behind a firewall and uses the following command in upstart to create an ssh tunnel: /usr/bin/autossh -fN -i /keyfile -o StrictHostKeyChecking=no -R 20098:localhost:22 user@centralserver Machine B we'll call the "central server", which sits in the cloud and is the host. This machine is "centralserver" in the command above. When Machine A is hard powered off, and back on, I cannot connect to it by SSH'ing from my machine (C) to Machine B in the cloud, then using the following command to get to Machine A: ssh -p 2098 user@localhost Again, after a reboot of the client (A), this works fine. It is only after a hard power down that the problem occurs. There are autossh processes that are running on the client machine (A) after powering down and back up, but they just don't seem to doing their job.

    Read the article

  • Paranormal activity in My Pictures folder: Thumbnail doesn't match actual picture.

    - by Sam152
    After finding an amusing picture on a popular imageboard, I decided to save it. A few days past and I was browsing my images folder when I realised that the thumbnail generated by Windows XP in the thumbnails view did not match the actual image. Here is a comparison image: What's even stranger in this situation is that the parts of the photograph that are different have actually been replaced with what might be the correct background. Furthermore, it is a jpeg (no PNG transparency tricks) that is 343 kilobytes but only 847x847 pixels wide. What could be going on here? Could there be anything malicious in the works, or hidden data? Before anyone asks, I have checked and preformed the following: Deleted Thumbs.db to reload thumbnails. Opened image in different editors. (they appear with the text) Moved image to a different directory. Changed the extension to .rar. All these steps produce the same results. Pre actual posting update: It seems that opening the image in paint, changing the image entirely (deleting entire contents and making a red fill) will still generate the original thumbnail, even after deleting Thumbs.db etc. I'm also hesitant to post the original data, in case there is something malicious or hidden that could be potentially illegal. (Although it would be very beneficial to see if it works on other computers and not just my own).

    Read the article

  • How do I serve Ruby on Rails applications on Windows Server 2008?

    - by Adam Lassek
    I have spent the last several hours attempting to get Ruby on Rails running on a Windows server with no luck. At first I tried configuring a test application through IIS7's FastCGI support, but the documentation for this is not very good. I've been following this blog entry, and this one, and this one, and this one but everything seems to be missing major steps, or are out of date. And every article keeps linking back to this Howto from rubyonrails.org that doesn't exist. The sense that I'm getting is that even if I manage to make this work, IIS' FastCGI isn't good enough to use in a production environment anyway. So it looks like my best bet is to setup a reverse proxy in IIS that points to Apache & Mongrel/Passenger using ARR and UrlRewrite. Is there anybody else out there stuck deploying a Rails application on a Windows stack? Am I on the right track? Can you give me a better idea of how to configure this? I believe Plesk already installed an instance of Apache/Tomcat running on this server using a different port, so adding another virtual host shouldn't be difficult; the hardest part seems to be setting up the reverse proxy through IIS.

    Read the article

  • Is there a simple context-menu add-in that could make-up for the Windows-7 status bar deficiency?

    - by DanO
    Edit: I initially asked about free disk space and selected item size. It has since been pointed out that the selected item size summary is still availiable natively in the details pane. I had read elsewhere (wikipedia) that this was removed along with disk free space, which is not the case. Only free disk space has been completely removed. Selection size is still availiable. Is there a context menu add-in out there that could show the free disk space of the relevant drive, when you right click? This would go a long way to compensating for one of the only steps backward I’ve discovered in Windows 7 so far. I doubt anyone had created one specifially for this need before windows 7 because this information was previously easily accessible in the status bar. I thought about creating one, but it has been a while since I have messed with the Shell API, and I know there are coders out there who could do it faster and better. If you’ve heard of one, or know of something else to make-up for this Microsoft misstep, I’d appreciate hearing about it. If MS were listing to the community they would already have a powertoy or add-in of some kind to un-break this. (they could release it unsupported even), as there seem to be many power users that are extremely annoyed by this feature removal decision. If anyone has seen something, please post it here. As it has been only 4 days since official Windows 7 release, I'll wait at least a week to chose an answer. Here's a picture of protoype screenshot: SU question 19232 is related.

    Read the article

  • Windows 7 pc freezes for an indeterminate amount of time after unlocking

    - by pikes
    Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

    Read the article

  • Preventing back connect in Cpanel servers

    - by Fernando
    We run a Cpanel server and someone gained access to almost all accounts using the following steps: 1) Gained access to an user account due to weak password. Note: this user didn't had shell access. 2) With this user account, he accessed Cpanel and added a cron task. The cron task was a perl script that connected to his IP and he was able to send back shell commands. 3) Having a non jailed shell, he was able to change content of most websites in server specially for users who set their folders to 777 ( Unfortunately a common recommendation and sometimes a requirement for some PHP softwares ). Is there a way to prevent this? We started by disabling cron in Cpanel interface, but this is not enough. I see a lot of other options in which an user could run this perl script. We have a firewall running and blocking uncommon outgoing ports. But he used port 80 and, well, I can't block this port as a lot of processes use them to access things, even Cpanel itself.

    Read the article

  • Computer is dying--what should I be looking for?

    - by Will
    Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

    Read the article

  • How do I find the Serial Number of a USB Drive?

    - by jamuraa
    I'm trying to re-enable USB Autoplay in a secure way, by installing a program on each of the computers that I use so that I can run my launcher (PStart in this case) whenever I plug in my specific USB drive. The tool that I'm using to enable this - AutoRunGuard - needs the serial number of the USB drive that I am using. I can't figure out where to find this in Windows. Ideally I would not need to install and run a separate program to do this (seemingly) simple task. Since this is a pretty easy question, bonus points if you also tell me how to discover it in Linux as well. What steps do I need to take to retrieve a USB Drive's serial number? UPDATE: Just incase people come here looking for the answer for AutoRunGuard, I discovered that they don't want the USB device serial number, but the volume serial number. The drive serial can be found by going into the command line, navigating to the drive, and executing dir. The volume serial number is found in the top two lines - use it without the dash.

    Read the article

  • Windows 7, Black screen with cursor, impossible to logon

    - by PJC
    First - I have gone through as many possible solutions I've found here and elsewhere. [Edit - to describe the issue in more detail, the PC appears to boot correctly, but instead of the logon screen, I have been getting a black screen WITH the pointer cursor, and it responds correctly to the mouse. Pressing CTL-ALT-DEL brings up the logon screen's background, but with no logon area nor any other content. This screen was at the full resolution before I uninstalled the graphics driver in safe-mode.] I also just ran a full up-to-date AVG scan from boot media. [Edit - the AVG scan, which was updated to today's virus signatures, found no issues at all.] So - steps I've tried: Safe Boot, Restore from before the issue - done, no help. Uninstall the graphics driver - done, now i have a 1024x768 fallback screen, still no way in. sfc /scannow - only doable from Safe boot obviously, but no change. [Edit - booting from restore media, performing a startup repair and...]Restore further back - restored to 2 days ago, and I'd had many reboots since then with no problem. Enable autologin to try to get beyond the login screen - done, doesn't work. It seems the best advice is complete reinstall, but I really don't want to do that because it'll take 3-4 days to add all the apps I use. Some key points to note - in both states - before and after removing the video driver, I always had a mouse cursor on the screen. CTL-ALT-DEL flashes up the login background, but no login info. I can (and often do) reinstall from scratch, but was at a fairly stable state before this, and would prefer not to. -Paul

    Read the article

  • Cancelling Window 7 shutdown diables power button

    - by Jens
    Normally, pressing the power button once initiates a shut-down in Windows 7. If any programs are still running that will not quit (e.g. waiting for a dialogue response), Windows overlays the screen with a dialogue allowing the user to cancel the shut-down. I've just noticed that on two different systems here, using this cancel option disables the shut-down via power button. The power button can still be used to kill the system by holding it for a few seconds, using the Start menu button to shut the PC down still works as well. Steps to reproduce: Open Notepad, type a few characters. Do not save. Press the computer's power button. Wait until the dark screen appears. Press cancel. Press the power button again. Notice how nothing happens. What is the reason for this behaviour, and can it be disabled to always try and shut down the PC when the power button is pressed?

    Read the article

  • What could cause a dual-monitor PC to suddenly stop using one of the screens?

    - by raldi
    I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

    Read the article

  • Amazon EC2 - Free memory

    - by Damo
    We have an amazon ec2 small instance running and over the past few days we noticed that the memory is going down and down. On the small instance, we are running apache and tomcat6 Tomcat is started with the following JVM parameters -Xms32m -Xmx128m -XX:PermSize=128m -XX:MaxPermSize=256m We use nagios to monitor stuff like updates to apply, free disk space and memory. Everything else is behaving as expected but our memory is going down all the time. Our app receives approx half a million hits a day When I shutdown apache and tomcat, and ran free -m, we had only 594mb of memory free out out of the 1.7gb of memory. Not much else is running on the small instance and when running the top command I cannot see where the memory is going. The app we run on tomcat is a grails webapp. Could there be a possibility that there is a memory leak within our application? I read online and folks say that a small amazon instance is perfect for running apach and tomcat. I found a few posts online that showed how to setup apache and tomcat to limit the memory usage and I have already performed those steps. The memory is not being used up as quick but the memory is still decreasing over time. We have other amazone ec2 small instances running grails apps and the memory is fairly standard on those nodes. But they would not be receiving as much traffic Just to add, when I run the top command on the problem server, I cannot see where all the memory is being used Any help with this is greatly appreciated The output of free -m when run on my server is as follows total used free shared buffers cached Mem: 1657 1380 277 0 158 773 -/+ buffers/cache: 447 1209 Swap: 895 0 895 In your opinion, does this look ok? At what stage would the OS give back memory, would it wait to the memory reaches 0% or is this OS dependent?

    Read the article

  • Apache downloads php files instead of running their source

    - by Devils Child
    I have just recently upgraded PHP 5.3 to 5.4 on my Debian Squeeze server. Now, instead of executing PHP files, Apache just downloads them, which is really bad. When I try to follow these steps, I get "broken packages" upon installing the libapache2-mod-php5 package. Also the answer tells me to add something to my httpd.conf, but it's empty. Question: How can I make apache execute php files again, instead of just passing them through as download? dpkg -l | grep php returns this rc libapache2-mod-php5 5.3.3-7+squeeze15 server-side, HTML-embedded scripting language (Apache 2 module) rc php5-cli 5.3.3-7+squeeze15 command-line interpreter for the php5 scripting language ii php5-common 5.4.15-1~dotdeb.2 Common files for packages built from the php5 source rc php5-gd 5.3.3-7+squeeze15 GD module for php5 rc php5-mcrypt 5.3.3-7+squeeze15 MCrypt module for php5 rc php5-mysql 5.3.3-7+squeeze15 MySQL module for php5 rc php5-suhosin 0.9.32.1-1 advanced protection module for php5 rc phpmyadmin 4:3.3.7-7 MySQL web administration tool And apt-get install libapache2-mod-php5 produces this error The following packages have unmet dependencies: libapache2-mod-php5 : Depends: libdb5.1 but it is not installable Depends: libssl1.0.0 (>= 1.0.0) but it is not installable Depends: libxml2 (>= 2.8.0) but 2.7.8.dfsg-2+squeeze7 is to be installed Recommends: php5-cli but it is not going to be installed E: Broken packages

    Read the article

  • VMware ESX Linux Guest Customization

    - by andyh_ky
    Hello, I am interested in deploying several RHEL 4 Update 8 virtual machines for creation of a test environment. Here are the steps I am taking: In off hours, P2V/V2V the production machines and convert them to templates Deploy the virtual machines with a customization specification that changes hostname, IP address I am interested in how these processes are done and if there are any options for further customization. Are the machines brought on the network when they are powered on, before they are reconfigured? Is there a potential IP address conflict? Is there an option to run additional scripts which reside on the guest as a part of the reconfiguration? For example, restoring an Oracle Database. This is an option with Windows guests and sysprep, but I have been unable to locate anything showing a RHEL equivalent. I am dealing with a multi tier application. The main issue I am attempting to mitigate is that the application servers reference database servers by hostname and in tnsnames files. I am interested in scripting the reconfiguration of the application in the deployment so that the app/db servers are pointing to the test environment. I am OK with placing the 'cleanup' script on the source and executing it after the machine has been brought up. I am interested in the automation of the script's execution post clone/boot, as well as if there could be an IP address conflict. (cross posted to VMTN's ESX 4 community)

    Read the article

  • How to train users converting from PC to Mac/Apple at a small non profit?

    - by Everette Mills
    Background: I am part of a team that provides volunteer tech support to a local non profit. We are in the position to obtain a grant to update almost all of our computers (many of them 5 to 7 year old machines running XP), provide laptops for users that need them, etc. We are considering switching our users from PC (WinXP) to Macs. The technical aspects of switching will not be an issue for the team. We are in the process of planning data conversions, machine setup, server changes, etc regardless of whether we switch to Macs or much newer PCs. About 1/4 of the staff uses or has access to a Mac at home, these users already understand the basics of using the equipment. We have another set of (generally younger) users that are technically savvy and while slightly inconvenienced and slowed for a few days should be able to switch over quickly. Finally, several members of the staff are older and have many issues using there computers today. We think in the long run switching to Macs may provide a better user experience, fewer IT headaches, and more effective use of computers. The questions we have is what resources and training (webpages, Books, online training materials or online courses) do you recommend that we provide to users to enable the switchover to happen smoothly. Especially, with a focus on providing different levels of training and support to users with different skill levels. If you have done this in your own organization, what steps were successful, what areas were less successful?

    Read the article

  • Folder Sharing NTFS permissions with Share Permission

    - by Muhammad Adly
    i have a problem on my domain, the history starting from when i had a server with WIN 2008 r2 installed with the following roles installed on it (AD, DNS, DHCP, File). From 1 month i decided to install a new server 2008 r2 server to get (AD, DNS, DHCP) and leave the file server on the old one. i did the following exactly: 1) robocopy all my data on external HDD 2) Install a new server with 2008 r2 3) transfer all 5 roles to transfer the domain to the new server (MainDC) 4) issue (NETLOGON, SYSVOL) not transferred but i decided to reinitialize them again an now they are operating (MainDC) 5) re-create and re-configure a new GPOs and link it to my OUs 6) reinstall Old server operating system with a fresh installation of WIN 2008 R2 (FileServer) 7) join my domain with my domain credentials. the issue when i tried to share folder on \fileserver the permissions that i had set in sharing permissions are applied on the main shared folder and subfolders. the security settings are not applied. i.e. Say i'm sharing \fileserver\MainFolder with sharing permission for Authenticated Users that can read, so every one can read this main shared folder, if i set security permission for \fileserver\MainFolder\User1 that User1 can Read\Write\Modify. User1 can not perform this processes when accessing it from Network Share, i tried alot of steps from topics online get ownership for folder, remove inheritance from parent folder, applying changes for child objects, i tried also to construct a new folder structure but also the same issue, i tried another host PC, also i get the same issue.

    Read the article

  • php mail() function painfully slow on local development machine

    - by Michael B
    Background: If you have set up a local apache server for development purposes you may have run into the problem where sendmail takes a long time (at least one minute) to send emails. This is extremely frustrating if you are trying to debug a problem with an email you have generated. There are several forum posts on the internet that discuss this problem. However, none of theme described what to do in enough detail for my limited knowledge. Here are the steps that worked for me: 1) find your hostname (in case you've forgotten it) using this command: :~$ cat /hosts/hostname myhostname 2) edit the file /etc/hosts and make sure the first line is the following: 127.0.0.1 localhost.localdomain localhost myhostname 3) edit the sendmail configuration file ( /etc/mail/sendmail.cf in Ubuntu) and Uncomment the line #O HostsFile=/etc/hosts 4) Restart the computer. The computer should boot up much faster now and the mail() function should return almost immediately. HOWEVER, the emails won't actually be sent unless you follow step 5. 5) You must new use the sendmail '-f' option whenever using the mail function. For example: mail('[email protected]', 'the subject', 'the message', null, '[email protected]'); My question for my fellow serverfaulters is: What further changes can be made so that I don't have to use the sendmail -f option? Although it's not very hard to add the -f option, it is a problem when your CMS (such as Drupal) does not use the -f option when sending mail. You would need to hack a core module to add this option.

    Read the article

  • How to configure SVN server for my own project

    - by user1729952
    I work with a team on an Android project using Eclipse IDE, we need to use a version control and we need to access the repo remotely, I have no experience using or installing servers, a little experience using SVN on Windows, but I still have problems connecting to it remotely. I need to use no-ip.com to change my IP, however; I failed to make VisualSVN server to work with no-ip. What options do I have? The best thing is to get it work with Windows if not, I have another computer that is running Ubuntu 12.4.1, I have installed apache2svn on it trying to get it work, the svn is installed, I went through tutorials to configure accessing protocols, but I can't figure out how to access it remotely from another computer? Can someone tell me the steps I need to get this job done and I can do my search for each step? (Please explain each step as some keywords or phrases I may not be familiar with) EDIT: Also worth noting, that my company has a website hosted on a remote server, can we use it as a repo? and how? It's running Linux

    Read the article

  • mysqld - master to slave replication using rsync innodb, sequence number issues

    - by Luis
    I've read several of the related topics posted here, but I have not been able to avoid this innodb error. The steps I've taken to replicate data from a Slackware server - 5.5.27-log (S) to a FreeBSD slave - 5.5.21-log (F) were these: (S) flush tables with read lock; (S) in another terminal show master status; (S) stop mysqld via command line in third terminal; (F) while both servers are stopped, rsync mysql datadir from (S), excluding master.info, mysql-bin and relay-* files; (F) start mysqld (skip-slave) 121018 12:03:29 InnoDB: Error: page 7 log sequence number 456388912904 InnoDB: is in the future! Current system log sequence number 453905468629. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. This kind of error happens for a lot of tables. I know I can use dump, but the database is large, ca. 70GB and the systems are slow (old), so would like to get this replication to work with data transfer. What should I try to solve this issue?

    Read the article

  • [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

    - by Maurycy Zarzycki
    Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

    Read the article

  • [deb-5.0] Setup DNS on my server so I can put my IPs in as nameservers of my domain provider

    - by Maurycy Zarzycki
    Basically, my unmanaged VPS provider doesn't supply me with nameserver which I can use with my domain provider to route domain to my server. As I've been told: You need to configure the custom DNS server in your VPS, to setup the custom nameservers. Please refer the following article that would help: http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch18_:_Configuring_DNS Once you configure the nameserver records, please update the domain registrar panel with the custom nameserver details. I tried to follow this guide but it seems to be a bit outdated, and I am complete newb with non-windows systems. I also scanned the google for other articles which could help me with this problem but, alas, nothing I found was of any value for someone who doesn't know this stuff better than his own pockets. I realize this is quite a complex thing to do, but maybe there is some way to automate it? Or a better solution, like a paid service which would act as my nameservers (this one would be interesting), or even hoped to find some company which "rents" people to do stuff like that. Blah, any help will be appreciated, I am at a complete loss here. I can follow some of these steps, but then I soon find that half of the files which are mentioned in the article are somehow not existing anywhere on the server which confuses me, and once we get to the point of creating Zone I can't really decipher all the things written there :/. As per title, my system is Debian 5.0.

    Read the article

< Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544  | Next Page >