Search Results

Search found 24149 results on 966 pages for 'visual studio package'.

Page 539/966 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

• The Raspberry Pi JavaFX In-Car System (Part 3)

  - by speakjava

  Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

  Read the article

• How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

  - by Don Quixote

  I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

  Read the article

• The Latest Major Release of AutoVue is Now Available!

  - by Pam Petropoulos

  Click here to read the full press release. To learn more about AutoVue 20.2, check out the What's New in AutoVue 20.2 Datasheet AutoVue 20.2 continues to set the standard for enterprise level visualization with Augmented Business Visualization, a new paradigm which reconciles information and business data from multiple sources into a single view, providing rich and actionable visual decision-making environments. The release also includes; capabilities that enhance end-to-end approval workflow; solutions to visually enable the mobile workforce; and support for the latest manufacturing and high tech formats.     New capabilities in release 20.2 include: ·         Enhancements to the Augmented Business Visualization framework o    Creation of 2D hotspots has been extended in 2D drawings, PDF and image files and can now be defined as regional boxes, rather than just text strings o    New 3D Hotspot links in models and drawings. Parts or components of 3D models can be selected to create hotspot links. ·         Enhanced end-to-end approval workflows with digital stamping and batch stamping improvements ·         Solutions that visually enable the mobile workforce and extend enterprise visualization to mobile devices, including iPads through OVDI (Oracle Virtual Desktop Infrastructure) ·         Enhancements to AutoVue enterprise readiness: reliability and performance improvements, as well as security enhancements which adhere to Oracle’s Software Security Assurance standards ·         Timely support for new MCAD, ECAD, and Office formats ·         New 20.2 versions of AutoVue Document Print Services and Integration SDK (iSDK) ·         New Dutch language availability   The press release also contains terrific supporting quotes from AutoVue customers and partners.        “AutoVue’s stamping enhancements will greatly benefit our building permit management processes,” said Ties Kremer, Information Manager, Noordenveld Municipality, Netherlands. “The ability to batch stamp documents will speed up our approval processes, enable us to save time and money, and help us meet our regulatory compliance obligations.”          “AutoVue provides our non-technical teams in marketing and sales with access to customer order requirements and supporting CAD documents and drawings,” said James Lim, Regional Technical Systems Manager at Molex Incorporated. “AutoVue 20.2 has enabled us to refine our quotation process, and reduce order errors.”         “We are excited about our use of AutoVue’s Augmented Business Visualization framework, which will offer Meridian users enhanced access to related technical documentation,” said Edwin van Dijk, Director of Product Management, BlueCielo.  “By including AutoVue’s new regional hotspot capabilities within BlueCielo Meridian Enterprise, the context of engineering information is carried over into the visual representation of complex assets, thereby helping us to improve productivity and operational excellence.”    

  Read the article

• Solaris 11.1: Encrypted Immutable Zones on (ZFS) Shared Storage

  - by darrenm

  Solaris 11 brought both ZFS encryption and the Immutable Zones feature and I've talked about the combination in the past.  Solaris 11.1 adds a fully supported method of storing zones in their own ZFS using shared storage so lets update things a little and put all three parts together. When using an iSCSI (or other supported shared storage target) for a Zone we can either let the Zones framework setup the ZFS pool or we can do it manually before hand and tell the Zones framework to use the one we made earlier.  To enable encryption we have to take the second path so that we can setup the pool with encryption before we start to install the zones on it. We start by configuring the zone and specifying an rootzpool resource: # zonecfg -z eizoss Use 'create' to begin configuring a new zone. zonecfg:eizoss> create create: Using system default template 'SYSdefault' zonecfg:eizoss> set zonepath=/zones/eizoss zonecfg:eizoss> set file-mac-profile=fixed-configuration zonecfg:eizoss> add rootzpool zonecfg:eizoss:rootzpool> add storage \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 zonecfg:eizoss:rootzpool> end zonecfg:eizoss> verify zonecfg:eizoss> commit zonecfg:eizoss> Now lets create the pool and specify encryption: # suriadm map \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 PROPERTY VALUE mapped-dev /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # echo "zfscrypto" > /zones/p # zpool create -O encryption=on -O keysource=passphrase,file:///zones/p eizoss \ /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # zpool export eizoss Note that the keysource example above is just for this example, realistically you should probably use an Oracle Key Manager or some other better keystorage, but that isn't the purpose of this example.  Note however that it does need to be one of file:// https:// pkcs11: and not prompt for the key location.  Also note that we exported the newly created pool.  The name we used here doesn't actually mater because it will get set properly on import anyway. So lets go ahead and do our install: zoneadm -z eizoss install -x force-zpool-import Configured zone storage resource(s) from: iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 Imported zone zpool: eizoss_rpool Progress being logged to /var/log/zones/zoneadm.20121029T115231Z.eizoss.install Image: Preparing at /zones/eizoss/root. AI Manifest: /tmp/manifest.xml.ujaq54 SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: eizoss Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/solaris/release/ Please review the licenses for the following packages post-install: consolidation/osnet/osnet-incorporation (automatically accepted, not displayed) Package licenses may be viewed using the command: pkg info --license <pkg_fmri> DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 187/187 33575/33575 227.0/227.0 384k/s PHASE ITEMS Installing new actions 47449/47449 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 929.606 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/eizoss/root/var/log/zones/zoneadm.20121029T115231Z.eizoss.install That was really all we had to do, when the install is done boot it up as normal. The zone administrator has no direct access to the ZFS wrapping keys used for the encrypted pool zone is stored on.  Due to how inheritance works in ZFS he can still create new encrypted datasets that use those wrapping keys (without them ever being inside a process in the zone) or he can create encrypted datasets inside the zone that use keys of his own choosing, the output below shows the two cases: rpool is inheriting the key material from the global zone (note we can see the value of the keysource property but we don't use it inside the zone nor does that path need to be (or is) accessible inside the zone). Whereas rpool/export/home/bob has set keysource locally. # zfs get encryption,keysource rpool rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool encryption on inherited from $globalzone rpool keysource passphrase,file:///zones/p inherited from $globalzone rpool/export/home/bob encryption on local rpool/export/home/bob keysource passphrase,prompt local  

  Read the article

• What 5 things should SQL Server get rid of?

  - by BuckWoody

  I’ve been “tagged” by my friend Paul Randal. It’s a high-tech way of making someone else do what you want, but since it’s Paul, well, I guess I’m OK with that. He’s asked in his recent blog entry “What five things would you get rid of in SQL Server if you were in charge?” This is, of course, a delicate issue. After all, I work at Microsoft, so anything I say here might be taken as a criticism that would require action – but of course it really doesn’t. Interestingly, you may have more to do with what goes in to SQL Server than I did even as a Program Manager where I “owned” a feature. Unlike many places I’ve worked, Microsoft really does drive its products by what its users want – not every time, and not every user request, mind you, but overall I think we hit the mark pretty well. So, with all of that said, and of course the obligatory statement of “these are my own opinions, and have nothing to do with any official Microsoft position in any way, and do not reflect the opinions of other Microsoft employees or management”, here goes. 1. Get rid of SQL Server Management Studio Does that surprise you? After all, when I was a Program Manager, I actually owned the general architecture for SSMS. But those on my team probably would have been able to guess this one for you. I think that SSMS is a fine development tool. But I think that it does less of a good job for managing a system. It’s based on Visual Studio, probably one of the best development IDE’s around. And when I develop code, I really like it. But for a monitoring/management tool, I prefer a snap-in to the Microsoft Management Console (MMC). I know, the old one (prior to 3.0) was kludgy, difficult to use and program in. But that’s changed. Of course, when I bring this up, you’ll probably immediately say “But I don’t have that in XP.” And that’s one of the reasons we didn’t go there. (But I still don’t like SSMS for management.) 2. ShrinkDB I think this discussion has been done to death, so I’ll leave it at that. 3. SQL Server Agent Does that one surprise you as well? In my mind, since we ALWAYS ride on Windows, just use the task scheduler there, along with PowerShell. You could log the results in Windows logs, files, back into SQL Server, whatever. It’s just a complexity we don’t need in SQL Server. 4. SQL Server Error Logs We have a full logging setup in Windows. They’re well done, easy to understand and ubiquitous. We should just use that. 5. Several SKU’s I won’t say which, but we have a few SKU’s of SQL Server that need to go. And we need to figure out how to help you understand clearly where you need to go to Enterprise or Data Center.  Most folks are trying to push Standard edition to do things it isn’t designed to do, and then they think SQL Server won’t scale. I think we can do a better job of showing you where Standard Edition will hit the wall, and I think with fewer choices it would be pretty simple for you to pick the right one. Well, once again I’ve probably puzzled some folks and angered others. I think my work here is done. :) Back to you, Paul. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Teminal non-responsive on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• Is there a way to install i386 packages w/ it's i386 dependencies?

  - by foh1981

  I'm using Ubuntu 11.10 64-bit and I wish to install the CAD application DraftSight, which as of now only come in a 32-bit .deb file. I have installed this with some success before, but since 11.10 supports multiarch I would like to install the i386 versions of DraftSights dependencies. Ubuntu Software Center cannot handle the file, nor gdebi-gtk ('wrong architecture'). I can use dpkg with --force-architecture but there's A LOT of dependencies which I need to manually install afterward. Is there a way to automatically install these? Or semi-automatically with a script of some sort? (I'm thinking something along the lines of extracting the dependencies and adding :i386 and then feed that to apt-get or something...) Below is the output of dpkg-deb --info of the package in question. Package: dassault-systemes-draftsight Version: 2011.7.1198 Section: applications Priority: extra Architecture: i386 Pre-Depends: libexpat1 (>=2.0.1-4), libglib2.0-0 (>=2.22.3-0), libpcre3 (>=7.8-3), libselinux1 (>=2.0.85-2), zlib1g (>=1:1.2.3.3.dfsg-13), libc6 (>=2.10.1-0), libx11-6 (>=2:1.2.2-1), libxau6 (>=1:1.0.4-2), libxcomposite1 (>=1:0.4.0-4), libxcursor1 (>=1:1.1.9-1build1), libxdamage1 (>=1:1.1.1-4), libxdmcp6 (>=1:1.0.2-3), libxext6 (>=2:1.0.99.1-0), libxfixes3 (>=1:4.0.3-2build1), libxi6 (>=2:1.2.1-2), libxinerama1 (>=2:1.0.3-2), libxrandr2 (>=2:1.3.0-2), libxrender1 (>=1:0.9.4-2), libatk1.0-0 (>=1.28.0-0), libcairo2 (>=1.8.8-2), libdirectfb-extra (>=1.2.7-2), libfontconfig1 (>=2.6.0-1), libfreetype6 (>=2.3.9-5), libgtk2.0-0 (>=2.18.3-1), libpango1.0-0 (>=1.26.0-1), libpixman-1-0 (>=0.14.0-1), libpng12-0 (>=1.2.37-1), libxcb-render-util0 (>=0.3.6-1), libxcb-render0 (>=1.4-1), libxcb1 (>=1.4-1), debconf (>= 1.1) | debconf-2.0 Depends: libcomerr2 (>=1.41.9-1), libdbus-1-3 (>=1.2.16-0), libexpat1 (>=2.0.1-4), libgcc1 (>=1:4.4.1-4), libgcrypt11 (>=1.4.4-2), libglib2.0-0 (>=2.22.3-0), libgpg-error0 (>=1.6-1), libkeyutils1 (>=1.2-10), libpcre3 (>=7.8-3), libuuid1 (>=2.16-1), zlib1g (>=1:1.2.3.3.dfsg-13), libc6 (>=2.10.1-0), libgl1-mesa-glx (>=7.6.0-1), libglu1-mesa (>=7.6.0-1), libice6 (>=2:1.0.5-1), libsm6 (>=2:1.1.0-2), libx11-6 (>=2:1.2.2-1), libxau6 (>=1:1.0.4-2), libxdamage1 (>=1:1.1.1-4), libxdmcp6 (>=1:1.0.2-3), libxext6 (>=2:1.0.99.1-0), libxfixes3 (>=1:4.0.3-2build1), libxrender1 (>=1:0.9.4-2), libxt6 (>=1:1.0.5-3), libxxf86vm1 (>=1:1.0.2-1), libaudio2 (>=1.9.2-1), libavahi-client3 (>=0.6.25-1), libavahi-common3 (>=0.6.25-1), libcups2 (>=1.4.1-5), libdrm2 (>=2.4.14-1), libfontconfig1 (>=2.6.0-1), libgnutls26 (>=2.8.3-2), libgssapi-krb5-2 (>=1.7dfsg~beta3-1), libk5crypto3 (>=1.7dfsg~beta3-1), libkrb5-3 (>=1.7dfsg~beta3-1), libkrb5support0 (>=1.7dfsg~beta3-1), libstdc++6 (>=4.4.1-4), libtasn1-3 (>=2.2-1), libxcb1 (>=1.4-1), sendmail Installed-Size: 284948 Maintainer: Dassault Systemes <[email protected]> Homepage: www.3ds.com Description: With DraftSight, you can easily create professional CAD drawings. Supported file formats are DWT, DXF and DWG.

  Read the article

• Converting .docx to pdf (or .doc to pdf, or .doc to odt, etc.) with libreoffice on a webserver on the fly using php

  - by robertphyatt

  Ok, so I needed to convert .docx files to .pdf files on the fly, but none of the free php libraries that were available let me do it on my server (a webservice was not good enough). Basically either I needed to pay for a library (and have it maybe suck) or just deal with the free ones that didn't convert the formatting well enough. Not good enough! I found that LibreOffice (OpenOffice's successor) allows command line conversion using the LibreOffice conversion engine (which DID preserve the formatting like I wanted and generally worked great). I loaded the latest version of Ubuntu (http://www.ubuntu.com/download/ubuntu/download) onto my Virtual Box (https://www.virtualbox.org/wiki/Downloads) on my computer and found that I was able to easily convert files using the commandline like this: libreoffice --headless -convert-to pdf fileToConvert.docx -outdir output/path/for/pdf I thought: sweet...but I don't have admin rights on my host's web server. I tried to use a "portable" version of LibreOffice that I obtained from http://portablelinuxapps.org/ but I was unable to get it to work on my host's webserver, because my host's webserver didn't have all the dependencies (Dependency Hell! http://en.wikipedia.org/wiki/Dependency_hell) I was at a loss of how to make it work, until I ran across a cool project made by a Ph.D. student (Philip J. Guo) at Stanford called CDE: http://www.stanford.edu/~pgbovine/cde.html I will let you look at his explanations of how it works (I followed what he did in http://www.youtube.com/watch?feature=player_embedded&v=6XdwHo1BWwY, starting at about 32:00 as well as the directions on his site), but in short, it allows one to avoid dependency hell by copying all the files used when you run certain commands, recreating the linux environment where the command worked. I was able to use this to run LibreOffice without having to resort to someone's portable version of it, and it worked just like it did when I did it on Ubuntu with the command above, with a tweak: I needed to run the wrapper of LibreOffice the CDE generated. So, below is my PHP code that calls it. In this code snippet, the filename to be copied is passed in as $_POST["filename"]. I copy the file to the same spot where I originally converted the file, convert it, copy it back and then delete all the files (so that it doesn't start growing exponentially). I did it this way because I wasn't able to make it work otherwise on the webserver. If there is a linux + webserver ninja out there that can figure out how to make it work without doing this, I would be interested to know what you did. Please post a comment or something if you did that. <?php //first copy the file to the magic place where we can convert it to a pdf on the fly copy($time.$_POST["filename"], "../LibreOffice/cde-package/cde-root/home/robert/Desktop/".$_POST["filename"]); //change to that directory chdir('../LibreOffice/cde-package/cde-root/home/robert'); //the magic command that does the conversion $myCommand = "./libreoffice.cde --headless -convert-to pdf Desktop/".$_POST["filename"]." -outdir Desktop/"; exec ($myCommand); //copy the file back copy("Desktop/".str_replace(".docx", ".pdf", $_POST["filename"]), "../../../../../documents/".str_replace(".docx", ".pdf", $_POST["filename"])); //delete all the files out of the magic place where we can convert it to a pdf on the fly $files1 = scandir('Desktop'); //my files that I generated all happened to start with a number. $pattern = '/^[0-9]/'; foreach ($files1 as $value) { preg_match($pattern, $value, $matches); if(count($matches) ?> 0) { unlink("Desktop/".$value); } } //changing the header to the location of the file makes it work well on androids header( 'Location: '.str_replace(".docx", ".pdf", $_POST["filename"]) ); ?> And here is the tar.gz file I generated I generated with CDE. To duplicate what I did exactly, put the tar.gz file in a folder somewhere. I will call that folder the "root". Make a new folder called "documents" in the "root" folder. Unpack the tar.gz and run the php script above from the "documents" folder. Success! I made a truly portable version of LibreOffice that can convert files on the fly on a webserver using 100% free, open source software!

  Read the article

• Cant finish upgrade from 11.10 to 12 on VPS based on Parallels Virtuozzo Containers, due to libc6

  - by Carmageddon

  I was stuck with this problem near the end of an upgrade: WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Their suggested stepds dont work on VPS, and after googling, I came up to this: Why did my upgrade to 12.04 fail with "glibc not found" or "libc6" or "requires kernel 2.6.24" error? There is comment by izx which explains my problem and proposes a workaround (might take a while to convince the guys to upgrade the kernel..). However, when I follow his instructions, I get error: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libc-dev-bin libc6 libc6-dev libnih1 Suggested packages: glibc-doc The following packages will be upgraded: libc-dev-bin libc6 libc6-dev libnih1 4 upgraded, 0 newly installed, 0 to remove and 394 not upgraded. 1 not fully installed or removed. Need to get 0 B/7737 kB of archives. After this operation, 233 kB disk space will be freed. Do you want to continue [Y/n]? y locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Preconfiguring packages ... (Reading database ... 35175 files and directories currently installed.) Preparing to replace libc6-dev 2.13-20ubuntu5.2 (using .../libc6-dev_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-dev-bin 2.13-20ubuntu5.2 (using .../libc-dev-bin_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6 2.13-20ubuntu5.2 (using .../libc6_2.15-0ubuntu10.3_amd64.deb) ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory WARNING: init script for samba not found. Stopping some services possibly affected by the upgrade (will be restarted later): cron: stopping...done. WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Processing triggers for man-db ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Errors were encountered while processing: /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I also attempted to manually grab the .deb package and install it using dpkg -i, but getting: locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) Even though the file is: libc-bin_2.15-0ubuntu10+openvz0_amd64.deb

  Read the article

• ORE graphics using Remote Desktop Protocol

  - by Sherry LaMonica

  Oracle R Enterprise graphics are returned as raster, or bitmap graphics. Raster images consist of tiny squares of color information referred to as pixels that form points of color to create a complete image. Plots that contain raster images render quickly in R and create small, high-quality exported image files in a wide variety of formats. However, it is a known issue that the rendering of raster images can be problematic when creating graphics using a Remote Desktop connection. Raster images do not display in the windows device using Remote Desktop under the default settings. This happens because Remote Desktop restricts the number of colors when connecting to a Windows machine to 16 bits per pixel, and interpolating raster graphics requires many colors, at least 32 bits per pixel.. For example, this simple embedded R image plot will be returned in a raster-based format using a standalone Windows machine:  R> library(ORE) R> ore.connect(user="rquser", sid="orcl", host="localhost", password="rquser", all=TRUE)  R> ore.doEval(function() image(volcano, col=terrain.colors(30))) Here, we first load the ORE packages and connect to the database instance using database login credentials. The ore.doEval function executes the R code within the database embedded R engine and returns the image back to the client R session. Over a Remote Desktop connection under the default settings, this graph will appear blank due to the restricted number of colors. Users who encounter this issue have two options to display ORE graphics over Remote Desktop: either raise Remote Desktop's Color Depth or direct the plot output to an alternate device. Option #1: Raise Remote Desktop Color Depth setting In a Remote Desktop session, all environment variables, including display variables determining Color Depth, are determined by the RCP-Tcp connection settings. For example, users can reduce the Color Depth when connecting over a slow connection. The different settings are 15 bits, 16 bits, 24 bits, or 32 bits per pixel. To raise the Remote Desktop color depth: On the Windows server, launch Remote Desktop Session Host Configuration from the Accessories menu.Under Connections, right click on RDP-Tcp and select Properties.On the Client Settings tab either uncheck LimitMaximum Color Depth or set it to 32 bits per pixel. Click Apply, then OK, log out of the remote session and reconnect.After reconnecting, the Color Depth on the Display tab will be set to 32 bits per pixel.  Raster graphics will now display as expected. For ORE users, the increased color depth results in slightly reduced performance during plot creation, but the graph will be created instead of displaying an empty plot. Option #2: Direct plot output to alternate device Plotting to a non-windows device is a good option if it's not possible to increase Remote Desktop Color Depth, or if performance is degraded when creating the graph. Several device drivers are available for off-screen graphics in R, such as postscript, pdf, and png. On-screen devices include windows, X11 and Cairo. Here we output to the Cairo device to render an on-screen raster graphic.  The grid.raster function in the grid package is analogous to other grid graphical primitives - it draws a raster image within the current plot's grid.  R> options(device = "CairoWin") # use Cairo device for plotting during the session R> library(Cairo) # load Cairo, grid and png libraries  R> library(grid) R> library(png)  R> res <- ore.doEval(function()image(volcano,col=terrain.colors(30))) # create embedded R plot  R> img <- ore.pull(res, graphics = TRUE)$img[[1]] # extract image  R> grid.raster(as.raster(readPNG(img)), interpolate = FALSE) # generate raster graph R> dev.off() # turn off first device   By default, the interpolate argument to grid.raster is TRUE, which means that what is actually drawn by R is a linear interpolation of the pixels in the original image. Setting interpolate to FALSE uses a sample from the pixels in the original image.A list of graphics devices available in R can be found in the Devices help file from the grDevices package: R> help(Devices)

  Read the article

• Teminal hands on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• With a little effort you can &ldquo;SEMI&rdquo;-protect your C# assemblies with obfuscation.

  - by mbcrump

  This method will not protect your assemblies from a experienced hacker. Everyday we see new keygens, cracks, serials being released that contain ways around copy protection from small companies. This is a simple process that will make a lot of hackers quit because so many others use nothing. If you were a thief would you pick the house that has security signs and an alarm or one that has nothing? To so begin: Obfuscation is the concealment of meaning in communication, making it confusing and harder to interpret. Lets begin by looking at the cartoon below:     You are probably familiar with the term and probably ignored this like most programmers ignore user security. Today, I’m going to show you reflection and a way to obfuscate it. Please understand that I am aware of ways around this, but I believe some security is better than no security.  In this sample program below, the code appears exactly as it does in Visual Studio. When the program runs, you get either a true or false in a console window. Sample Program. using System; using System.Diagnostics; using System.Linq;   namespace ObfuscateMe {     class Program     {                static void Main(string[] args)         {               Console.WriteLine(IsProcessOpen("notepad")); //Returns a True or False depending if you have notepad running.             Console.ReadLine();         }             public static bool IsProcessOpen(string name)         {             return Process.GetProcesses().Any(clsProcess => clsProcess.ProcessName.Contains(name));         }     } }   Pretend, that this is a commercial application. The hacker will only have the executable and maybe a few config files, etc. After reviewing the executable, he can determine if it was produced in .NET by examing the file in ILDASM or Redgate’s Reflector. We are going to examine the file using RedGate’s Reflector. Upon launch, we simply drag/drop the exe over to the application. We have the following for the Main method:   and for the IsProcessOpen method:     Without any other knowledge as to how this works, the hacker could export the exe and get vs project build or copy this code in and our application would run. Using Reflector output. using System; using System.Diagnostics; using System.Linq;   namespace ObfuscateMe {     class Program     {                static void Main(string[] args)         {               Console.WriteLine(IsProcessOpen("notepad"));             Console.ReadLine();         }             public static bool IsProcessOpen(string name)         {             return Process.GetProcesses().Any<Process>(delegate(Process clsProcess)             {                 return clsProcess.ProcessName.Contains(name);             });         }       } } The code is not identical, but returns the same value. At this point, with a little bit of effort you could prevent the hacker from reverse engineering your code so quickly by using Eazfuscator.NET. Eazfuscator.NET is just one of many programs built for this. Visual Studio ships with a community version of Dotfoscutor. So download and load Eazfuscator.NET and drag/drop your exectuable/project into the window. It will work for a few minutes depending if you have a quad-core or not. After it finishes, open the executable in RedGate Reflector and you will get the following: Main After Obfuscation IsProcessOpen Method after obfuscation: As you can see with the jumbled characters, it is not as easy as the first example. I am aware of methods around this, but it takes more effort and unless the hacker is up for the challenge, they will just pick another program. This is also helpful if you are a consultant and make clients pay a yearly license fee. This would prevent the average software developer from jumping into your security routine after you have left. I hope this article helped someone. If you have any feedback, please leave it in the comments below.

  Read the article

• Making it GREAT! Oracle Partners Building Apps Workshop with UX and ADF in UK

  - by ultan o'broin

  Yes, making is what it's all about. This time, Oracle Partners in the UK were making great looking usable apps with the Oracle Applications Development Framework (ADF) and user experience (UX) toolkit. And what an energy-packed and productive event at the Oracle UK, Thames Valley Park, location it was. Partners learned the fundamentals of enterprise applications UX, why it's important, all about visual design, how to wireframe designs, and then how to build their already-proven designs in ADF. There was a whole day on mobile apps, learning about mobile design principles, free mobile UX and ADF resources from Oracle, and then trying it out. The workshop wrapped up with the latest Release 7 simplified UIs, Mobilytics, and other innovations from Oracle, and a live demo of a very neat ADF Mobile Android app built by an Oracle contractor. And, what a fun two days both Grant Ronald of ADF and myself had in running the workshop with such a great audience, too! I particularly enjoyed the wireframing and visual design sessions interaction; and seeing some outstanding work done by partners. Of note from the UK workshop were innovative design features not seen before and made me all the happier that developers were bringing their own ideas from the consumer IT world of mobility, simplicity, and social to the world of work apps in a smart way within an enterprise methodology too.  Partner wireframe exercise. Applying mobile design principles and UX design patterns means you've already productively making great usable apps! Next, over to Oracle ADF Mobile with it! One simple example from the design of a mobile field service app was that participants immediately saw how the UX and device functionality of the super UK-based app Hailo app could influence their designs (the London cabbie influence maybe?), as well as how we all use maps, cameras, barcode scanners and microphones on our phones could be used in work. And, of course, ADF Mobile has the device integration solutions there too! I wonder will U.S. workshops in Silicon Valley see an Uber UX influence (LOL)! That we also had partners experienced with Oracle Forms who could now offer a roadmap from Forms to Simplified UI and Mobile using ADF, and do it through through the cloud, really made this particular workshop go "ZING!" for me. Many thanks to the Oracle PartnerNetwork (OPN) team for organizing this event with us, and to the representatives of the Oracle Partners that showed and participated so well. That's what I love out this outreach. It's a two-way, solid value-add for all. Interested? Why would partners and developers with ADF skills sign up for this workshop? Here's why: Learn to use the Oracle Applications User Experience design patterns as the usability building blocks for applications development in Oracle Application Development Framework. The workshop enables attendees to build modern and visually compelling desktop and mobile applications that look and behave like Oracle Cloud Applications, and that can co-exist with partner integrations, new, or existing applications deployments. Partners learn to offer customers and clients more than just coded functionality; instead they can provide a complete user experience with a roadmap for continued ROI from applications that also creating more business and attracts the kudos and respect from other makers of apps as they're wowed by the results. So, if you're a partner and interested in attending one of these workshops and benefitting from such learning, as well as having a platform to show off some of your own work, stay well tuned to your OPN channels, to this blog, to the VoX blog, and to the @usableapps Twitter account too. Can't wait? For developers and partners, some key mobile resources to explore now Oracle ADF Mobile UX Patterns and Components Wiki Oracle ADF Academy (Mobile) Oracle ADF Insider Essentials Oracle Applications Mobile User Experience Design Patterns and Guidance

  Read the article

• Representing Mauritius in the 2013 Bench Games

  Only by chance I came across an interesting option for professionals and enthusiasts in IT, and quite honestly I can't even remember where I caught attention of Brainbench and their 2013 Bench Games event. But having access to 600+ free exams in a friendly international intellectual competition doesn't happen to be available every day. So, it was actually a no-brainer to sign up and browse through the various categories. Most interestingly, Brainbench is not only IT-related. They offer a vast variety of fields in their Test Center, like Languages and Communication, Office Skills, Management, Aptitude, etc., and it can be a little bit messy about how things are organised. Anyway, while browsing through their test offers I added a couple of exams to 'My Plan' which I would give a shot afterwards. Self-assessments Actually, I took the tests based on two major aspects: 'Fun Factor' and 'How good would I be in general'... Usually, you have to pay for any kind of exams and given this unique chance by Brainbench to simply train this kind of tests was already worth the time. Frankly speaking, the tests are very close to the ones you would be asked to do at Prometric or Pearson Vue, ie. Microsoft exams, etc. Go through a set of multiple choice questions in a given time frame. Most of the tests I did during the Bench Games were based on 40 questions, each with a maximum of 3 minutes to answer. Ergo, one test in maximum 2 hours - that sounds feasible, doesn't it? The Measure of Achievement While the 2013 Bench Games are considered a worldwide friendly competition of knowledge I was really eager to get other Mauritians attracted. Using various social media networks and community activities it all looked quite well at the beginning. Mauritius was listed on rank #19 of Most Certified Citizens and rank #10 of Most Master Level Certified Nation - not bad, not bad... Until... the next update of the Bench Games Leaderboard. The downwards trend seemed to be unstoppable and I couldn't understand why my results didn't show up on the Individual Leader Board. First of all, I passed exams that were not even listed and second, I had better results on some exams listed. After some further information from the organiser it turned out that my test transcript wasn't available to the public. Only then results are considered and counted in the competition. During that time, I actually managed to hold 3 test results on the Individuals... Other participants were merciless, eh, more successful than me, produced better test results than I did. But still I managed to stay on the final score board: An 'exotic' combination of exam, test result, country and person itself Representing Mauritius and the Visual FoxPro community in that fun event. And although I mainly develop in Visual FoxPro 9.0 SP2 and C# using .NET Framework from 2.0 to 4.5 since a couple of years I still managed to pass on Master Level. Hm, actually my Microsoft Certified Programmer (MCP) exams are dated back in June 2004 - more than 9 years ago... Look who got lucky... As described above I did a couple of exams as time allowed and without any preparations, but still I received the following mail notification: "Thank you for recently participating in our Bench Games event.  We wanted to inform you that you obtained a top score on our test(s) during this event, and as a result, will receive a free annual Brainbench subscription.  Your annual subscription will give you access to all our tests just like Bench Games, but for an entire year plus additional benefits!" -- Leader Board Notification from Brainbench Even fun activities get rewarded sometimes. Thanks to @Brainbench_com for the free annual subscription based on my passed 2013 Bench Games Master Level exam. It would be interesting to know about the total figures, especially to see how many citizens of Mauritius took part in this year's Bench Games. Anyway, I'm looking forward to be able to participate in other challenges like this in the future.

  Read the article

• Searching for context in Silverlight applications

  - by PeterTweed

  A common behavior in business applications that have developed through the ages is for a user to be able to get information or execute commands in relation to some information/function displayed by right clicking the object in question and popping up a context menu that offers relevant options to choose. The Silverlight Toolkit April 2010 release introduced the context menu object.  This can be added to other UI objects and display options for the user to choose.  The menu items can be enabled or disabled as per your application logic and icons can be added to the menu items to add visual effect.  This post will walk you through how to use the context menu object from the Silverlight Toolkit. Steps: 1. Create a new Silverlight 4 application 2. Copy the following namespace definition to the user control object of the MainPage.xaml file: xmlns:my="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Input.Toolkit"   3. Copy the following XAML into the LayoutRoot grid in MainPage.xaml:          <Border CornerRadius="15" Background="Blue" Width="400" Height="100">             <TextBlock Foreground="White" FontSize="20" Text="Context Menu In This Border...." HorizontalAlignment="Center" VerticalAlignment="Center" >             </TextBlock>             <my:ContextMenuService.ContextMenu>                 <my:ContextMenu >                     <my:MenuItem                 Header="Copy"                 Click="CopyMenuItem_Click" Name="copyMenuItem">                         <my:MenuItem.Icon>                             <Image Source="copy-icon-small.png"/>                         </my:MenuItem.Icon>                     </my:MenuItem>                     <my:Separator/>                     <my:MenuItem Name="pasteMenuItem"                 Header="Paste"                 Click="PasteMenuItem_Click">                         <my:MenuItem.Icon>                             <Image Source="paste-icon-small.png"/>                         </my:MenuItem.Icon>                     </my:MenuItem>                 </my:ContextMenu>             </my:ContextMenuService.ContextMenu>         </Border>   The above code associates a context menu with two menu items and a separator between them to the border object.  The menu items has icons associated with them to add visual appeal.  The menu items have click event handlers that will be added in the MainPage.xaml.cs code behind in a later step. 4. Add two icon sized images to the ClientBin directory of the web project hosting the Silverlight application, named copy-icon-small.png and paste-icon-small.jpg respectively.  I used copy and paste icons as the names suggest. 5. Add the following code to the class in MainPage.xaml.cs file:         private void CopyMenuItem_Click(object sender, RoutedEventArgs e)         {             MessageBox.Show("Copy selected");         }           private void PasteMenuItem_Click(object sender, RoutedEventArgs e)         {             MessageBox.Show("Paste selected");         }   This code adds the event handlers for the menu items defined in step 3. 6. Run the application, right click on the border and select a menu option and see the appropriate message box displayed. Congratulations it’s that easy!   Take the Slalom Challenge at www.slalomchallenge.com!

  Read the article

• Data breakpoints to find points where data gets broken

  - by raccoon_tim

  When working with a large code base, finding reasons for bizarre bugs can often be like finding a needle in a hay stack. Finding out why an object gets corrupted without no apparent reason can be quite daunting, especially when it seems to happen randomly and totally out of context. Scenario Take the following scenario as an example. You have defined the a class that contains an array of characters that is 256 characters long. You now implement a method for filling this buffer with a string passed as an argument. At this point you mistakenly expect the buffer to be 256 characters long. At some point you notice that you require another character buffer and you add that after the previous one in the class definition. You now figure that you don’t need the 256 characters that the first member can hold and you shorten that to 128 to conserve space. At this point you should start thinking that you also have to modify the method defined above to safeguard against buffer overflow. It so happens, however, that in this not so perfect world this does not cross your mind. Buffer overflow is one of the most frequent sources for errors in a piece of software and often one of the most difficult ones to detect, especially when data is read from an outside source. Many mass copy functions provided by the C run-time provide versions that have boundary checking (defined with the _s suffix) but they can not guard against hard coded buffer lengths that at some point get changed. Finding the bug Getting back to the scenario, you’re now wondering why does the second string get modified with data that makes no sense at all. Luckily, Visual Studio provides you with a tool to help you with finding just these kinds of errors. It’s called data breakpoints. To add a data breakpoint, you first run your application in debug mode or attach to it in the usual way, and then go to Debug, select New Breakpoint and New Data Breakpoint. In the popup that opens, you can type in the memory address and the amount of bytes you wish to monitor. You can also use an expression here, but it’s often difficult to come up with an expression for data in an object allocated on the heap when not in the context of a certain stack frame. There are a couple of things to note about data breakpoints, however. First of all, Visual Studio supports a maximum of four data breakpoints at any given time. Another important thing to notice is that some C run-time functions modify memory in kernel space which does not trigger the data breakpoint. For instance, calling ReadFile on a buffer that is monitored by a data breakpoint will not trigger the breakpoint. The application will now break at the address you specified it to. Often you might immediately spot the issue but the very least this feature can do is point you in the right direction in search for the real reason why the memory gets inadvertently modified. Conclusions Data breakpoints are a great feature, especially when doing a lot of low level operations where multiple locations modify the same data. With the exception of some special cases, like kernel memory modification, you can use it whenever you need to check when memory at a certain location gets changed on purpose or inadvertently.

  Read the article

• Ubuntu 12.04 Hp G72 Problem Installing proprietary wireless driver

  - by user69402

  I have a fresh Ubuntu 12.04 installed on HP G72 machine. In order for my wireless to work I need the proprietary driver installed - Broadcom STA wireless driver. Trying to install it from the System Settings gives me the error: "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log". So far I suspect the error to be caused by the bad "bcmwl-kernel-source" installation. What i tried: 1. remove "bcmwl-kernel-source" 2. install "bcmwl-kernel-source" installation through the terminal ends with "error code (1)". I would greatly appreciate any help Here is everything that the terminal returns: Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,151 kB of archives. After this operation, 3,514 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 170331 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.38+bdcom-0ubuntu6.1_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.38+bdcom-0ubuntu6.1) ... Loading new bcmwl-5.100.82.38+bdcom DKMS files... /usr/sbin/dkms: line 467: unset: POST_REMOVE$PRE_BUMLD': not a valid identifier /usr/sbin/dkms: line 467: unset:BUILD_E\CLUWIVE_ARCH': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: modules_conf_arra}': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: $': not a valid identifier /usr/sbin/dkms: line 467: unset:$': not a valid identifier /usr/sbin/dkms: line 467: unset: `$': not a valid identifier /usr/sbin/dkms: line 419: ${!POST_REMOVE$PRE_BUMLD[@]}: bad substitution /usr/sbin/dkms: line 419: ${!BUILD_E\CLUWIVE_ARCH[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution /usr/sbin/dkms: line 419: ${!$[@]}: bad substitution malloc: ../bash/subst.c:3671: assertion botched free: start and end chunk sizes differ Aborting.../tmp/tmp.pEXTnftUfI: line 4: modules_conf_arra}[[@]}]=[[@]}]}: command not found dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified for record #0. dkms.conf: Error! Directive 'DEST_MODULE_LOCATION' does not begin with '/kernel', '/updates', or '/extra' in record #0. dkms.conf: Error! No 'PACKAGE_VERSION' directive specified. Error! Bad conf file. File: /usr/src/bcmwl-5.100.82.38+bdcom/dkms.conf does not represent a valid dkms.conf file. dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 8 Errors were encountered while processing: bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Migrating VB6 to HTML5 is not a fiction - Customer success story

  - by Webgui

  All of you VB developers in the present or past would probably find it hard to believe that the old VB code can be migrated and modernized into the latest .NET based HTML5 without having to rewrite the application. But we have been working on such tools for the past couple of years and already have several real world applications that were fully 'transposed' from VB6. The solution is called Instant CloudMove and its main tool is called the TranspositionStudio. It is a unique solution that relies on the concept of transposition. Transposition comes from mathematics and music and refers to exchanging elements while everything else remains the same or moving an element as is from one environment to another. This means that we are taking the source code and put it in a modern technological environment with relatively few adjustments.The concept is based on a set of Mapping Expressions which are basically links between an element in the source environment and one in the target environment that has the same functionality. About 95% of the code is usually mapped out-of-the-box and the rest is handled with easy-to-use mapping tools designed for Visual Studio developers providing them with a familiar environment and concepts for completing the mapping and allowing them to extend and customize existing mapping expressions. The solution is also based on a circular workflow that enables developers to make any changes as required until the result is satisfying.As opposed to existing migration solutions that offer automation are usually a “black box” to the user, the transposition concept enables full visibility, flexibility and control over the code and process at all times allowing to also add/change functionalities or upgrade the UI within the process and tools.This is exactly the case with our customer’s aging VB6 PMS (Property Management System) which needed a technological update as well as a design refresh. The decision was to move the VB6 application which had about 1 million lines of code into the latest web technology. Since the application was initially written 13 years ago and had many upgrades since the code must be very patchy and includes unused sections. As a result, the company Mihshuv Group considered rewriting the entire application in Java since it already had the knowledge. Rewrite would allow starting with a clean slate and designing functionality, database architecture, UI without any constraints. On the other hand, rewrite entitles a long and detailed specification work as well as a thorough QA and this translates into a long project with high risk and costs.So the company looked for a migration solution as an alternative; the research lead to Gizmox and after examining the technology it was decided to perform a hybrid project which would include an automatic transposition of the core of the VB6 application (200,000 lines of code) while they redesigning the UI, adding new functionality, deleting unused code and rewriting about 140 reports with Crystal Reports will be done manually using Visual WebGui development tools.The migration part of the project was completed in 65 days by 3 developers from Mihshuv Group guided by Gizmox migration experts while the rewrite and UI upgrade tasks took about the same. So in only a few months period Mihshuv Group generated an up-to-date product, written in the latest Web technology with modern, friendly UI and improved functionality. Guest selection screen of the original VB6 PMS Guest selection screen on the new web–based PMS Compared to the initial plan to rewrite the entire application in Java, the hybrid migration/rewrite approach taken by Mihshuv Group using Gizmox technology proved as a great decision. In terms of time and cost there were substantial savings; from a project that was priced for at least a year (without taking into account the huge risk and uncertainty) it became a few months project only. More about this and other customer stories can be found here

  Read the article

• Setting up your project

  - by ssoolsma

  Before any coding we first make sure that the project is setup correctly. (Please note, that this blog is all about how I do it, and incase i forget, i can return here and read how i used to do it. Maybe you come up with some idea’s for yourself too.) In these series we will create a minigolf scoring cart. Please note that we eventually create a fully functional application which you cannot use unless you pay me alot of money! (And i mean alot!)   1. Download and install the appropriate tools. Download the following: - TestDriven.Net (free version on the bottom of the download page) - nUnit TestDriven is a visual studio plugin for many unittest frameworks, which allows you to run  / test code very easily with a right click –> run test. nUnit is the test framework of choice, it works seamless with TestDriven.   2. Create your project Fire up visual studio and create your DataAccess project:  MidgetWidget.DataAccess is it’s name. (I choose MidgetWidget as name for the solution). Also, make sure that the MidgetWidget.DataAccess project is a c# ClassLibary Hit OK to create the solution. (in the above example the checkbox Create directory for solution is checked, because i’m pointing the location to the root of c:\development where i want MidgetWidget to be created.   3. Setup the database. You should have thought about a database when you reach this point. Let’s assume that you’ve created a database as followed: Table name: LoginKey Fields: Id (PK), KeyName (uniqueidentifier), StartDate (datetime), EndDate (datetime) Table name:  Party Fields: Id (PK), Key (uniqueidentifier, Created (datetime) Table name:  Person Fields: Id(PK),  PartyId (int), Name (varchar) Tablename: Score Fields: Id (PK), Trackid (int), PersonId (int), Strokes (int) Tablename: Track Fields: Id (PK), Name (varchar) A few things to take note about the database setup. I’ve singularized all tablenames (not “Persons“ but “Person”. This is because in a few minutes, when this is in our code, we refer to the database objects as single rows. We retrieve a single Person not a single “Persons” from the database.   4. Create the entity framework In your solution tree create a new folder and call it “DataModel”. Inside this folder: Add new item –> and choose ADO.NET Entity Data Model. Name it “Entities.edmx” and hit  “Add”. Once the edmx is added, open it (double click) and right click the white area and choose “Update model from database…". Now, point it to your database (i include sensitive data in the connectionstring) and select all the tables. After that hit “Finish” and let the entity framework do it’s code generation. Et Voila, after a few seconds you have set up your entity model. Next post we will start building the data-access! I’m off to the beach.

  Read the article

• how to code multiple button navigation with java activities [migrated]

  - by user1738212

  Question 1: I have 2 activities. I was wondering how to optimize it. I can either create 2 activities with multiple listeners. Or create multiple java files for each button(onclick listener) Question 2: I have tried to create multiple listeners in one java but can only get one button to work. What is the syntax for multiple listeners in one java file? Here is my *updated code: now the issue is no matter what button is clicked on it leads to the same page. package install.fineline; import android.app.Activity; import android.content.Context; import android.content.Intent; import android.os.Bundle; import android.widget.Button; import android.view.View; import android.view.View.OnClickListener; public class Activity1 extends Activity2 { Button Button1; Button Button2; Button Button3; Button Button4; Button Button5; Button Button6; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.fineline); addListenerOnButton(); } public void addListenerOnButton() { final Context context = this; Button1 = (Button) findViewById(R.id.autobody); Button1.setOnClickListener(new OnClickListener() { public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button2 = (Button) findViewById(R.id.glass); Button2.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button3 = (Button) findViewById(R.id.wheels); Button3.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button4 = (Button) findViewById(R.id.speedy); Button4.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button5 = (Button) findViewById(R.id.sevan); Button5.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button6 = (Button) findViewById(R.id.towing); Button6.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); }} activity2.java package install.fineline; import android.app.Activity; import android.os.Bundle; import android.widget.Button; public class Activity2 extends Activity { Button Button1; public void onCreate1(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.autobody); } Button Button2; public void onCreate2(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.glass); } Button Button3; public void onCreate3(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.wheels); } Button button4; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.speedy); } Button Button5; public void onCreate5(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.sevan); } Button Button6; public void onCreate6(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.towing); }}

  Read the article

• Why is the framerate (fps) capped at 60?

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated. EDIT: Thanks All. For any others that find this to disable vSync(windows only) in opengl: First get "wglext.h". It's all over the web. Then you can use a tool like GLee or just write your own quick extensions manager like: bool WGLExtensionSupported(const char *extension_name) { PFNWGLGETEXTENSIONSSTRINGEXTPROC _wglGetExtensionsStringEXT = NULL; _wglGetExtensionsStringEXT = (PFNWGLGETEXTENSIONSSTRINGEXTPROC) wglGetProcAddress("wglGetExtensionsStringEXT"); if (strstr(_wglGetExtensionsStringEXT(), extension_name) == NULL) { return false; } return true; } and then create and setup your function pointers: PFNWGLSWAPINTERVALEXTPROC wglSwapIntervalEXT = NULL; PFNWGLGETSWAPINTERVALEXTPROC wglGetSwapIntervalEXT = NULL; if (WGLExtensionSupported("WGL_EXT_swap_control")) { // Extension is supported, init pointers. wglSwapIntervalEXT = (PFNWGLSWAPINTERVALEXTPROC) wglGetProcAddress("wglSwapIntervalEXT"); // this is another function from WGL_EXT_swap_control extension wglGetSwapIntervalEXT = (PFNWGLGETSWAPINTERVALEXTPROC) wglGetProcAddress("wglGetSwapIntervalEXT"); } Then just call wglSwapIntervalEXT(0) to disable vSync and 1 to enable vSync. I found the reason this is windows only is that openGl actually doesn't deal with anything other than rendering it leaves the rest up to the OS and Hardware. Thanks everyone saved me a lot of time!

  Read the article

• ?12c database ????Adaptive Execution Plans ????????

  - by Liu Maclean(???)

  12c R1 ????SQL??????- Adaptive Execution Plans ????????,???????optimizer ??????(runtime)???????????????, ????????????????????? SQL???????? ????????????, ?????????????????????????????????????????????????????????????adaptive plan ????????????????????????????????????,?????subplan???????????????????? ??????, ???????? ???????????????,?????????, ?????? ???????????????”???”????, ???????????????????buffer ???????  ????????????,?????,??????????????????? ???optimizer ?????????????????????????,?????????????????????????????????????????plan???? ??12C?????????????, ???????????????????,?????? ???????????? ????????????2???: Dynamic Plans????: ???????????????????????;??????,???optimizer??????????subplans??????????????, ???????????????????,?????????????? Reoptimization????: ?Dynamic Plans????,Reoptimization??????????????????????Reoptimization??,?????????????????????????,??reoptimization????? OPTIMIZER_ADAPTIVE_REPORTING_ONLY ???? report-only????????????????TRUE,?????????report-only????,???????????????,??????????????? Dynamic Plans ??????????????,????????????????????????, ?????????????,???????????,????????????????????????????????????????? ?????????????final plan??????????????default plan, ??final plan?default plan???????,????????????? subplan ???????????????,???????????????????????? ??????,???????statistics collector ?buffer???????????statistics collector?????????????????,???????????????????????????? ?????????????????????????????????????????,??????????,?????????????? ???????????,???????buffer???? ???????????????,?????????????????????????????,??????buffer,??????final plan? ????????,???????????????????????,????????????????? ?V$SQL??????IS_RESOLVED_DYNAMIC_PLAN??????????final plan???default plan? ??????dynamic plan ???????SQL PLAN directives?????? declare cursor PLAN_DIRECTIVE_IDS is select directive_id from DBA_SQL_PLAN_DIRECTIVES; begin for z in PLAN_DIRECTIVE_IDS loop DBMS_SPD.DROP_SQL_PLAN_DIRECTIVE(z.directive_id); end loop; end; / explain plan for select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id; select * from table(dbms_xplan.display()); Plan hash value: 1255158658 www.askmaclean.com ------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 4 | 128 | 7 (0)| 00:00:01 | | 1 | NESTED LOOPS | | | | | | | 2 | NESTED LOOPS | | 4 | 128 | 7 (0)| 00:00:01 | |* 3 | TABLE ACCESS FULL | ORDER_ITEMS | 4 | 48 | 3 (0)| 00:00:01 | |* 4 | INDEX UNIQUE SCAN | PRODUCT_INFORMATION_PK | 1 | | 0 (0)| 00:00:01 | | 5 | TABLE ACCESS BY INDEX ROWID| PRODUCT_INFORMATION | 1 | 20 | 1 (0)| 00:00:01 | ------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 3 - filter("O"."UNIT_PRICE"=15 AND "QUANTITY">1) 4 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") alter session set events '10053 trace name context forever,level 1'; OR alter session set events 'trace[SQL_Plan_Directive] disk highest'; select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id; ---------------------------------------------------------------+-----------------------------------+ | Id | Operation | Name | Rows | Bytes | Cost | Time | ---------------------------------------------------------------+-----------------------------------+ | 0 | SELECT STATEMENT | | | | 7 | | | 1 | HASH JOIN | | 4 | 128 | 7 | 00:00:01 | | 2 | NESTED LOOPS | | | | | | | 3 | NESTED LOOPS | | 4 | 128 | 7 | 00:00:01 | | 4 | STATISTICS COLLECTOR | | | | | | | 5 | TABLE ACCESS FULL | ORDER_ITEMS | 4 | 48 | 3 | 00:00:01 | | 6 | INDEX UNIQUE SCAN | PRODUCT_INFORMATION_PK| 1 | | 0 | | | 7 | TABLE ACCESS BY INDEX ROWID | PRODUCT_INFORMATION | 1 | 20 | 1 | 00:00:01 | | 8 | TABLE ACCESS FULL | PRODUCT_INFORMATION | 1 | 20 | 1 | 00:00:01 | ---------------------------------------------------------------+-----------------------------------+ Predicate Information: ---------------------- 1 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") 5 - filter(("O"."UNIT_PRICE"=15 AND "QUANTITY">1)) 6 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID") ===================================== SPD: BEGIN context at statement level ===================================== Stmt: ******* UNPARSED QUERY IS ******* SELECT /*+ OPT_ESTIMATE (@"SEL$1" JOIN ("P"@"SEL$1" "O"@"SEL$1") ROWS=13.000000 ) OPT_ESTIMATE (@"SEL$1" TABLE "O"@"SEL$1" ROWS=13.000000 ) */ "P"."PRODUCT_NAME" "PRODUCT_NAME" FROM "OE"."ORDER_ITEMS" "O","OE"."PRODUCT_INFORMATION" "P" WHERE "O"."UNIT_PRICE"=15 AND "O"."QUANTITY">1 AND "P"."PRODUCT_ID"="O"."PRODUCT_ID" Objects referenced in the statement PRODUCT_INFORMATION[P] 92194, type = 1 ORDER_ITEMS[O] 92197, type = 1 Objects in the hash table Hash table Object 92197, type = 1, ownerid = 6573730143572393221: No Dynamic Sampling Directives for the object Hash table Object 92194, type = 1, ownerid = 17822962561575639002: No Dynamic Sampling Directives for the object Return code in qosdInitDirCtx: ENBLD =================================== SPD: END context at statement level =================================== ======================================= SPD: BEGIN context at query block level ======================================= Query Block SEL$1 (#0) Return code in qosdSetupDirCtx4QB: NOCTX ===================================== SPD: END context at query block level ===================================== SPD: Return code in qosdDSDirSetup: NOCTX, estType = TABLE SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92197, objtyp = 1, vecsize = 6, colvec = [4, 5, ], fid = 2896834833840853267 SPD: Inserted felem, fid=2896834833840853267, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = YES, keep = YES SPD: qosdCreateFindingSingTab retCode = CREATED, fid = 2896834833840853267 SPD: qosdCreateDirCmp retCode = CREATED, fid = 2896834833840853267 SPD: Return code in qosdDSDirSetup: NOCTX, estType = TABLE SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = JOIN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SKIP_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = JOIN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_SCAN SPD: Return code in qosdDSDirSetup: NOCTX, estType = INDEX_FILTER SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92197, objtyp = 1, vecsize = 6, colvec = [4, 5, ], fid = 2896834833840853267 SPD: Modified felem, fid=2896834833840853267, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = YES, keep = YES SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92194, objtyp = 1, vecsize = 2, colvec = [1, ], fid = 5618517328604016300 SPD: Modified felem, fid=5618517328604016300, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO SPD: Generating finding id: type = 1, reason = 1, objcnt = 1, obItr = 0, objid = 92194, objtyp = 1, vecsize = 2, colvec = [1, ], fid = 1142802697078608149 SPD: Modified felem, fid=1142802697078608149, ftype = 1, freason = 1, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO SPD: Generating finding id: type = 1, reason = 2, objcnt = 2, obItr = 0, objid = 92194, objtyp = 1, vecsize = 0, obItr = 1, objid = 92197, objtyp = 1, vecsize = 0, fid = 1437680122701058051 SPD: Modified felem, fid=1437680122701058051, ftype = 1, freason = 2, dtype = 0, dstate = 0, dflag = 0, ver = NO, keep = NO select * from table(dbms_xplan.display_cursor(format=>'report')) ; ????report????adaptive plan Adaptive plan: ------------- This cursor has an adaptive plan, but adaptive plans are enabled for reporting mode only.  The plan that would be executed if adaptive plans were enabled is displayed below. ------------------------------------------------------------------------------------------ | Id  | Operation          | Name                | Rows  | Bytes | Cost (%CPU)| Time     | ------------------------------------------------------------------------------------------ |   0 | SELECT STATEMENT   |                     |       |       |     7 (100)|          | |*  1 |  HASH JOIN         |                     |     4 |   128 |     7   (0)| 00:00:01 | |*  2 |   TABLE ACCESS FULL| ORDER_ITEMS         |     4 |    48 |     3   (0)| 00:00:01 | |   3 |   TABLE ACCESS FULL| PRODUCT_INFORMATION |     1 |    20 |     1   (0)| 00:00:01 | ------------------------------------------------------------------------------------------ SQL> select SQL_ID,IS_RESOLVED_DYNAMIC_PLAN,sql_text from v$SQL WHERE SQL_TEXT like '%MALCEAN%' and sql_text not like '%like%'; SQL_ID IS -------------------------- -- SQL_TEXT -------------------------------------------------------------------------------- 6ydj1bn1bng17 Y select /*MALCEAN*/ product_name from oe.order_items o, oe.product_information p where o.unit_price=15 and quantity>1 and p.product_id=o.product_id ???? explain plan for ????default plan, ??????optimizer???final plan,??V$SQL.IS_RESOLVED_DYNAMIC_PLAN???Y,????????????? DBA_SQL_PLAN_DIRECTIVES?????????????SQL PLAN DIRECTIVES, ???12c? ???MMON?????DML ???column usage??????????,????SMON??? MMON????SGA??PLAN DIRECTIVES??? ?????DBMS_SPD.flush_sql_plan_directive???? select directive_id,type,reason from DBA_SQL_PLAN_DIRECTIVES / DIRECTIVE_ID TYPE REASON ----------------------------------- -------------------------------- ----------------------------- 10321283028317893030 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE 4757086536465754886 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE 16085268038103121260 DYNAMIC_SAMPLING JOIN CARDINALITY MISESTIMATE SQL> set pages 9999 SQL> set lines 300 SQL> col state format a5 SQL> col subobject_name format a11 SQL> col col_name format a11 SQL> col object_name format a13 SQL> select d.directive_id, o.object_type, o.object_name, o.subobject_name col_name, d.type, d.state, d.reason 2 from dba_sql_plan_directives d, dba_sql_plan_dir_objects o 3 where d.DIRECTIVE_ID=o.DIRECTIVE_ID 4 and o.object_name in ('ORDER_ITEMS') 5 order by d.directive_id; DIRECTIVE_ID OBJECT_TYPE OBJECT_NAME COL_NAME TYPE STATE REASON ------------ ------------ ------------- ----------- -------------------------------- ----- ------------------------------------- --- 1.8156E+19 COLUMN ORDER_ITEMS UNIT_PRICE DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1.8156E+19 TABLE ORDER_ITEMS DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1.8156E+19 COLUMN ORDER_ITEMS QUANTITY DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE DBA_SQL_PLAN_DIRECTIVES????? _BASE_OPT_DIRECTIVE ? _BASE_OPT_FINDING SELECT d.dir_own#, d.dir_id, d.f_id, decode(type, 1, 'DYNAMIC_SAMPLING', 'UNKNOWN'), decode(state, 1, 'NEW', 2, 'MISSING_STATS', 3, 'HAS_STATS', 4, 'CANDIDATE', 5, 'PERMANENT', 6, 'DISABLED', 'UNKNOWN'), decode(bitand(flags, 1), 1, 'YES', 'NO'), cast(d.created as timestamp), cast(d.last_modified as timestamp), -- Please see QOSD_DAYS_TO_UPDATE and QOSD_PLUS_SECONDS for more details -- about 6.5 cast(d.last_used as timestamp) - NUMTODSINTERVAL(6.5, 'day') FROM sys.opt_directive$ d ??dbms_spd??? SQL PLAN DIRECTIVES, SQL PLAN DIRECTIVES???retention ???53?: Package: DBMS_SPD This package provides subprograms for managing Sql Plan Directives(SPD). SPD are objects generated automatically by Oracle server. For example, if server detects that the single table cardinality estimated by optimizer is off from the actual number of rows returned when accessing the table, it will automatically create a directive to do dynamic sampling for the table. When any Sql statement referencing the table is compiled, optimizer will perform dynamic sampling for the table to get more accurate estimate. Notes: DBMSL_SPD is a invoker-rights package. The invoker requires ADMINISTER SQL MANAGEMENT OBJECT privilege for executing most of the subprograms of this package. Also the subprograms commit the current transaction (if any), perform the operation and commit it again. DBA view dba_sql_plan_directives shows all the directives created in the system and the view dba_sql_plan_dir_objects displays the objects that are included in the directives. -- Default value for SPD_RETENTION_WEEKS SPD_RETENTION_WEEKS_DEFAULT CONSTANT varchar2(4) := '53'; | STATE : NEW : Newly created directive. | : MISSING_STATS : The directive objects do not | have relevant stats. | : HAS_STATS : The objects have stats. | : PERMANENT : A permanent directive. Server | evaluated effectiveness and these | directives are useful. | | AUTO_DROP : YES : Directive will be dropped | automatically if not | used for SPD_RETENTION_WEEKS. | This is the default behavior. | NO : Directive will not be dropped | automatically. Procedure: flush_sql_plan_directive This procedure allows manually flushing the Sql Plan directives that are automatically recorded in SGA memory while executing sql statements. The information recorded in SGA are periodically flushed by oracle background processes. This procedure just provides a way to flush the information manually. ????”_optimizer_dynamic_plans”(enable dynamic plans)????????,???TRUE??DYNAMIC PLAN? ???FALSE???????????? ????,Dynamic Plan????????????Nested Loop?Hash Join???case ,????????Nested loop???????????HASH JOIN,?HASH JOIN????????????????? ????????subplan?????,???? pass?? ?join method???,?????STATISTICS COLLECTOR???cardinality?,???????HASH JOIN?????Nested Loop,????????????subplan?????access path; ???????Sales??????????????????,????HASH JOIN,??SUBPLAN??customers?????????;?????Nested Loop,???????cust_id?????Range Scan+Access by Rowid? Cardinality feedback Cardinality feedback????????11.2????,????????re-optimization???;  ???????????,Cardinality feedback?????????????????????????? ???????????????????,?????????????????,??????????Cardinality feedback????????????? ????????????????????????? ??????????????Cardinality feedback ??: ????????,???????????,??????????,????????????????selectivity ??? ????????????: ??????,?????????????????????????????????,??????????????????? ????????????????????????????????????????,?????????????????????????? ?????????,???????????????,?????????? ??????????Cardinality ????,??????join Cardinality ????????? Cardinality feedback???????cursor?,?Cursor???aged out????? SELECT /*+ gather_plan_statistics */ product_name FROM order_items o, product_information p WHERE o.unit_price = 15 AND quantity > 1 AND p.product_id = o.product_id Plan hash value: 1553478007 ---------------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | OMem | 1Mem | Used-Mem | ---------------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 13 |00:00:00.01 | 24 | 20 | | | | |* 1 | HASH JOIN | | 1 | 4 | 13 |00:00:00.01 | 24 | 20 | 2061K| 2061K| 429K (0)| |* 2 | TABLE ACCESS FULL| ORDER_ITEMS | 1 | 4 | 13 |00:00:00.01 | 7 | 6 | | | | | 3 | TABLE ACCESS FULL| PRODUCT_INFORMATION | 1 | 1 | 288 |00:00:00.01 | 17 | 14 | | | | ---------------------------------------------------------------------------------------------------------------------------------------- SELECT /*+ gather_plan_statistics */ product_name FROM order_items o, product_information p WHERE o.unit_price = 15 AND quantity > 1 AND p.product_id = o.product_id Plan hash value: 1553478007 ------------------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | OMem | 1Mem | Used-Mem | ------------------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 13 |00:00:00.01 | 24 | | | | |* 1 | HASH JOIN | | 1 | 13 | 13 |00:00:00.01 | 24 | 2061K| 2061K| 413K (0)| |* 2 | TABLE ACCESS FULL| ORDER_ITEMS | 1 | 13 | 13 |00:00:00.01 | 7 | | | | | 3 | TABLE ACCESS FULL| PRODUCT_INFORMATION | 1 | 288 | 288 |00:00:00.01 | 17 | | | | ------------------------------------------------------------------------------------------------------------------------------- Note ----- - statistics feedback used for this statement SQL> select count(*) from v$SQL where SQL_ID='cz0hg2zkvd10y'; COUNT(*) ---------- 2 SQL>select sql_ID,USE_FEEDBACK_STATS FROM V$SQL_SHARED_CURSOR where USE_FEEDBACK_STATS ='Y'; SQL_ID U ------------- - cz0hg2zkvd10y Y ????????Cardinality feedback????,???????????????????????????,????????????order_items???????? ????2??????plan hash value??(??????????),?????2????child cursor??????gather_plan_statistics???actual : A-ROWS  estimate :E-ROWS????????? Automatic Re-optimization ???dynamic plan, Re-optimization???????????????  ?  ??????????????? ????????????????????????????????  ???????????,??????????????, ???????????????????? ???????????  Re-optimization??, ????????????????????? Re-optimization????dynamic plan??????????  dynamic plan????????????????????, ???????????????????? ????,??????????join order ??????????????,?????????????join order????? ??????,????????Re-optimization, ??Re-optimization ??????????????????? ?Oracle database 12c?,join statistics?????????????????????,??????????????????????Re-optimization???????????adaptive cursor sharing????? ????????????????,???????????? ????? ???????statistics collectors ????????????????????Re-optimization??????2?????????????,???????????????? ??????????????Re-optimization?????,?????????????????????? ???v$SQL??????IS_REOPTIMIZABLE?????????????????????Re-optimization,??????????Re-optimization???,?????Re-optimization ,???????reporting????? IS_REOPTIMIZABLE VARCHAR2(1) This columns shows whether the next execution matching this child cursor will trigger a reoptimization. The values are:   Y: If the next execution will trigger a reoptimization R: If the child cursor contains reoptimization information, but will not trigger reoptimization because the cursor was compiled in reporting mode N: If the child cursor has no reoptimization information ??1: select plan_table_output from table (dbms_xplan.display_cursor('gwf99gfnm0t7g',NULL,'ALLSTATS LAST')); SQL_ID  gwf99gfnm0t7g, child number 0 ------------------------------------- SELECT /*+ SFTEST gather_plan_statistics */ o.order_id, v.product_name FROM  orders o,   ( SELECT order_id, product_name FROM order_items o, product_information p     WHERE  p.product_id = o.product_id AND list_price < 50 AND min_price < 40  ) v WHERE o.order_id = v.order_id Plan hash value: 1906736282 ------------------------------------------------------------------------------------------------------------------------------------------- | Id  | Operation             | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem | ------------------------------------------------------------------------------------------------------------------------------------------- |   0 | SELECT STATEMENT      |                     |      1 |        |    269 |00:00:00.02 |    1336 |     18 |       |       |          | |   1 |  NESTED LOOPS         |                     |      1 |      1 |    269 |00:00:00.02 |    1336 |     18 |       |       |          | |   2 |   MERGE JOIN CARTESIAN|                     |      1 |      4 |   9135 |00:00:00.02 |      34 |     15 |       |       |          | |*  3 |    TABLE ACCESS FULL  | PRODUCT_INFORMATION |      1 |      1 |     87 |00:00:00.01 |      33 |     14 |       |       |          | |   4 |    BUFFER SORT        |                     |     87 |    105 |   9135 |00:00:00.01 |       1 |      1 |  4096 |  4096 | 4096  (0)| |   5 |     INDEX FULL SCAN   | ORDER_PK            |      1 |    105 |    105 |00:00:00.01 |       1 |      1 |       |       |          | |*  6 |   INDEX UNIQUE SCAN   | ORDER_ITEMS_UK      |   9135 |      1 |    269 |00:00:00.01 |    1302 |      3 |       |       |          | ------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): ---------------------------------------------------    3 - filter(("MIN_PRICE"<40 AND "LIST_PRICE"<50))    6 - access("O"."ORDER_ID"="ORDER_ID" AND "P"."PRODUCT_ID"="O"."PRODUCT_ID") SQL_ID  gwf99gfnm0t7g, child number 1 ------------------------------------- SELECT /*+ SFTEST gather_plan_statistics */ o.order_id, v.product_name FROM  orders o,   ( SELECT order_id, product_name FROM order_items o, product_information p     WHERE  p.product_id = o.product_id AND list_price < 50 AND min_price < 40  ) v WHERE o.order_id = v.order_id Plan hash value: 35479787 -------------------------------------------------------------------------------------------------------------------------------------------- | Id  | Operation              | Name                | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem | -------------------------------------------------------------------------------------------------------------------------------------------- |   0 | SELECT STATEMENT       |                     |      1 |        |    269 |00:00:00.01 |      63 |      3 |       |       |          | |   1 |  NESTED LOOPS          |                     |      1 |    269 |    269 |00:00:00.01 |      63 |      3 |       |       |          | |*  2 |   HASH JOIN            |                     |      1 |    313 |    269 |00:00:00.01 |      42 |      3 |  1321K|  1321K| 1234K (0)| |*  3 |    TABLE ACCESS FULL   | PRODUCT_INFORMATION |      1 |     87 |     87 |00:00:00.01 |      16 |      0 |       |       |          | |   4 |    INDEX FAST FULL SCAN| ORDER_ITEMS_UK      |      1 |    665 |    665 |00:00:00.01 |      26 |      3 |       |       |          | |*  5 |   INDEX UNIQUE SCAN    | ORDER_PK            |    269 |      1 |    269 |00:00:00.01 |      21 |      0 |       |       |          | -------------------------------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): ---------------------------------------------------    2 - access("P"."PRODUCT_ID"="O"."PRODUCT_ID")    3 - filter(("MIN_PRICE"<40 AND "LIST_PRICE"<50))    5 - access("O"."ORDER_ID"="ORDER_ID") Note -----    - statistics feedback used for this statement    SQL> select IS_REOPTIMIZABLE,child_number FROM V$SQL  A where A.SQL_ID='gwf99gfnm0t7g'; IS CHILD_NUMBER -- ------------ Y             0 N             1    1* select child_number,other_xml From v$SQL_PLAN  where SQL_ID='gwf99gfnm0t7g' and other_xml is not nul SQL> / CHILD_NUMBER OTHER_XML ------------ --------------------------------------------------------------------------------            1 <other_xml><info type="cardinality_feedback">yes</info><info type="db_version">1              2.1.0.1</info><info type="parse_schema"><![CDATA["OE"]]></info><info type="plan_              hash">35479787</info><info type="plan_hash_2">3382491761</info><outline_data><hi              nt><![CDATA[IGNORE_OPTIM_EMBEDDED_HINTS]]></hint><hint><![CDATA[OPTIMIZER_FEATUR              ES_ENABLE('12.1.0.1')]]></hint><hint><![CDATA[DB_VERSION('12.1.0.1')]]></hint><h              int><![CDATA[ALL_ROWS]]></hint><hint><![CDATA[OUTLINE_LEAF(@"SEL$F5BB74E1")]]></              hint><hint><![CDATA[MERGE(@"SEL$2")]]></hint><hint><![CDATA[OUTLINE(@"SEL$1")]]>              </hint><hint><![CDATA[OUTLINE(@"SEL$2")]]></hint><hint><![CDATA[FULL(@"SEL$F5BB7              4E1" "P"@"SEL$2")]]></hint><hint><![CDATA[INDEX_FFS(@"SEL$F5BB74E1" "O"@"SEL$2"              ("ORDER_ITEMS"."ORDER_ID" "ORDER_ITEMS"."PRODUCT_ID"))]]></hint><hint><![CDATA[I              NDEX(@"SEL$F5BB74E1" "O"@"SEL$1" ("ORDERS"."ORDER_ID"))]]></hint><hint><![CDATA[              LEADING(@"SEL$F5BB74E1" "P"@"SEL$2" "O"@"SEL$2" "O"@"SEL$1")]]></hint><hint><![C              DATA[USE_HASH(@"SEL$F5BB74E1" "O"@"SEL$2")]]></hint><hint><![CDATA[USE_NL(@"SEL$              F5BB74E1" "O"@"SEL$1")]]></hint></outline_data></other_xml>            0 <other_xml><info type="db_version">12.1.0.1</info><info type="parse_schema"><![C              DATA["OE"]]></info><info type="plan_hash">1906736282</info><info type="plan_hash              _2">2579473118</info><outline_data><hint><![CDATA[IGNORE_OPTIM_EMBEDDED_HINTS]]>              </hint><hint><![CDATA[OPTIMIZER_FEATURES_ENABLE('12.1.0.1')]]></hint><hint><![CD              ATA[DB_VERSION('12.1.0.1')]]></hint><hint><![CDATA[ALL_ROWS]]></hint><hint><![CD              ATA[OUTLINE_LEAF(@"SEL$F5BB74E1")]]></hint><hint><![CDATA[MERGE(@"SEL$2")]]></hi              nt><hint><![CDATA[OUTLINE(@"SEL$1")]]></hint><hint><![CDATA[OUTLINE(@"SEL$2")]]>              </hint><hint><![CDATA[FULL(@"SEL$F5BB74E1" "P"@"SEL$2")]]></hint><hint><![CDATA[              INDEX(@"SEL$F5BB74E1" "O"@"SEL$1" ("ORDERS"."ORDER_ID"))]]></hint><hint><![CDATA              [INDEX(@"SEL$F5BB74E1" "O"@"SEL$2" ("ORDER_ITEMS"."ORDER_ID" "ORDER_ITEMS"."PROD              UCT_ID"))]]></hint><hint><![CDATA[LEADING(@"SEL$F5BB74E1" "P"@"SEL$2" "O"@"SEL$1              " "O"@"SEL$2")]]></hint><hint><![CDATA[USE_MERGE_CARTESIAN(@"SEL$F5BB74E1" "O"@"              SEL$1")]]></hint><hint><![CDATA[USE_NL(@"SEL$F5BB74E1" "O"@"SEL$2")]]></hint></o              utline_data></other_xml> ??2: SELECT /*+gather_plan_statistics*/ * FROM customers WHERE cust_state_province='CA' AND country_id='US'; SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID b74nw722wjvy3, child number 0 ------------------------------------- select /*+gather_plan_statistics*/ * from customers where CUST_STATE_PROVINCE='CA' and country_id='US' Plan hash value: 1683234692 -------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | -------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 29 |00:00:00.01 | 17 | 14 | |* 1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 8 | 29 |00:00:00.01 | 17 | 14 | -------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='CA' AND "COUNTRY_ID"='US')) SELECT SQL_ID, CHILD_NUMBER, SQL_TEXT, IS_REOPTIMIZABLE FROM V$SQL WHERE SQL_TEXT LIKE 'SELECT /*+gather_plan_statistics*/%'; SQL_ID CHILD_NUMBER SQL_TEXT I ------------- ------------ ----------- - b74nw722wjvy3 0 select /*+g Y ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' EXEC DBMS_SPD.FLUSH_SQL_PLAN_DIRECTIVE; SELECT TO_CHAR(d.DIRECTIVE_ID) dir_id, o.OWNER, o.OBJECT_NAME, o.SUBOBJECT_NAME col_name, o.OBJECT_TYPE, d.TYPE, d.STATE, d.REASON FROM DBA_SQL_PLAN_DIRECTIVES d, DBA_SQL_PLAN_DIR_OBJECTS o WHERE d.DIRECTIVE_ID=o.DIRECTIVE_ID AND o.OWNER IN ('SH') ORDER BY 1,2,3,4,5; DIR_ID OWNER OBJECT_NAME COL_NAME OBJECT TYPE STATE REASON ----------------------- ----- ------------- ----------- ------ ---------------- ----- ------------------------ 1484026771529551585 SH CUSTOMERS COUNTRY_ID COLUMN DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE 1484026771529551585 SH CUSTOMERS CUST_STATE_ COLUMN DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY PROVINCE MISESTIMATE 1484026771529551585 SH CUSTOMERS TABLE DYNAMIC_SAMPLING NEW SINGLE TABLE CARDINALITY MISESTIMATE SELECT /*+gather_plan_statistics*/ * FROM customers WHERE cust_state_province='CA' AND country_id='US'; ELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID b74nw722wjvy3, child number 1 ------------------------------------- select /*+gather_plan_statistics*/ * from customers where CUST_STATE_PROVINCE='CA' and country_id='US' Plan hash value: 1683234692 ----------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | ----------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 29 |00:00:00.01 | 17 | |* 1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 29 | 29 |00:00:00.01 | 17 | ----------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='CA' AND "COUNTRY_ID"='US')) Note ----- - cardinality feedback used for this statement SELECT SQL_ID, CHILD_NUMBER, SQL_TEXT, IS_REOPTIMIZABLE FROM V$SQL WHERE SQL_TEXT LIKE 'SELECT /*+gather_plan_statistics*/%'; SQL_ID CHILD_NUMBER SQL_TEXT I ------------- ------------ ----------- - b74nw722wjvy3 0 select /*+g Y ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' b74nw722wjvy3 1 select /*+g N ather_plan_ statistics* / * from cu stomers whe re CUST_STA TE_PROVINCE ='CA' and c ountry_id=' US' SELECT /*+gather_plan_statistics*/ CUST_EMAIL FROM CUSTOMERS WHERE CUST_STATE_PROVINCE='MA' AND COUNTRY_ID='US'; SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR(FORMAT=>'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ------------------------------------- SQL_ID 3tk6hj3nkcs2u, child number 0 ------------------------------------- Select /*+gather_plan_statistics*/ cust_email From customers Where cust_state_province='MA' And country_id='US' Plan hash value: 1683234692 ------------------------------------------------------------------------------- |Id | Operation | Name | Starts|E-Rows|A-Rows| A-Time |Buffers| ------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 2 |00:00:00.01| 16 | |*1 | TABLE ACCESS FULL| CUSTOMERS | 1 | 2| 2 |00:00:00.01| 16 | ----------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 1 - filter(("CUST_STATE_PROVINCE"='MA' AND "COUNTRY_ID"='US')) Note ----- - dynamic sampling used for this statement (level=2) - 1 Sql Plan Directive used for this statement EXEC DBMS_SPD.FLUSH_SQL_PLAN_DIRECTIVE; SELECT TO_CHAR(d.DIRECTIVE_ID) dir_id, o.OWNER, o.OBJECT_NAME, o.SUBOBJECT_NAME col_name, o.OBJECT_TYPE, d.TYPE, d.STATE, d.REASON FROM DBA_SQL_PLAN_DIRECTIVES d, DBA_SQL_PLAN_DIR_OBJECTS o WHERE d.DIRECTIVE_ID=o.DIRECTIVE_ID AND o.OWNER IN ('SH') ORDER BY 1,2,3,4,5; DIR_ID OW OBJECT_NA COL_NAME OBJECT TYPE STATE REASON ------------------- -- --------- ---------- ------- --------------- ------------- ------------------------ 1484026771529551585 SH CUSTOMERS COUNTRY_ID COLUMN DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY MISESTIMATE 1484026771529551585 SH CUSTOMERS CUST_STATE_ COLUMN DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY PROVINCE MISESTIMATE 1484026771529551585 SH CUSTOMERS TABLE DYNAMIC_SAMPLING MISSING_STATS SINGLE TABLE CARDINALITY MISESTIMATE

  Read the article

• Managed c++ std::string not accessible in unmanaged c++

  - by Radhesham

  In unmanaged c++ dll i have a function which takes constant std::string as argument Prototype : void read ( const std::string &amp;imageSpec_ ) I call this function from managed c++ dll by passing a std::string. When i debug the unmanaged c++ code the parameter imageSpec_ shows the value correctly but does not allow me to copy that value in other variable. imageSpec_.copy( sFilename, 4052 ); It shows length of imageSpec_ as 0(zero). If i try copying like std::string sTempFileName(imageSpec_); this statement string new string is a empty string. But for std::string sTempFileName(imageSpec_.c_str()); this statement string gets copied correctly. i.e. with charpointer string is copied correctly. Copying this way will need a major change in unmanaged c++ code. I am building unmanaged code in Visual studio 6.0 and managed c++ in Visual studio 2008. Is there any specific setting or code change in managed c++ that will solve the issue?

  Read the article

• iphone - direct link to iPhone review form from inside iphone

  - by Mike

  I am trying to link directly to the review link of one of my Apps. I know that it is possible because Appirater did it in the past, but some change in iTunes turned the API down. Appirater uses this URL NSString *templateReviewURL = @"itms-apps://itunes.apple.com/WebObjects/MZStore.woa/wa/viewContentsUserReviews?id=APP_ID&onlyLatestVersion=true&pageNumber=0&sortOrdering=1&type=Purple+Software"; where APP_ID is the ID of an application. running this from inside the APP gives me the message Cannot Connect to iTunes Store. This Page talks about another kind of link https://userpub.itunes.apple.com/WebObjects/MZUserPublishing.woa/wa/addUserReview?id=APP_ID&type=Purple+Software and also itms-apps://ax.itunes.apple.com/WebObjects/MZStore.woa/wa/viewContentsUserReviews?type=Purple+Software&id=APP_ID The first one works, but just from the desktop mac. The second gives me the same error as the first... Cannot Connect to iTunes Store. iTunes link maker is not helping too, because it has no tools for iPad links... Do you guys know how to link to an app's review form from inside an app? In case you don't know, what kind of package should I use to dig this? a package sniffer? thanks for any help.

  Read the article

• FragmentStatePagerAdapter IllegalStateException: <MyFragment> is not currently in the FragmentManager

  - by Ixx

  I'm getting this on some cases, when going back to the activity, which uses a FragmentStatePagerAdapter, using back button of the devices. Not always. Not reproducible. I'm using support package v4, last revision (8). Already searched with google, no success finding a useful answer. Looking in the source, it's thrown here: FragmentManager.java @Override public void putFragment(Bundle bundle, String key, Fragment fragment) { if (fragment.mIndex < 0) { throw new IllegalStateException("Fragment " + fragment + " is not currently in the FragmentManager"); } bundle.putInt(key, fragment.mIndex); } But why is the index of fragment < 0 there? The code instantiating the fragments: @Override public Fragment getItem(int position) { Fragment fragment = null; switch(position) { case 0: fragment = Fragment1.newInstance(param1); break; case 1: fragment = MyFragment2.newInstance(param2, param3); break; } return fragment; } @Override public int getCount() { return 2; } I also can't debug through the source since the support package doesn't let me attach the source, for some reason... but that's a different question...

  Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >