Search Results

Search found 1507 results on 61 pages for 'spaces'.

Page 54/61 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Java loop to collect the second and third elements every three in an array

    - by mhollander38
    I have a file with data in the form timestamp, coordinate, coordinate, seperated by spaces, as here; 14:25:01.215 370.0 333.0 I need to loop through and add the coordinates only to an array. The data from the file is read in and put into as String[] called info, from split(" "). I have two problems, I think the end of the file has a extra " " which I need to lose appropriately and I also want confirmation/suggestions of my loop, at the moment I am getting sporadic out of bounds exceptions. My loop is as follows; String[] info; info = dataHolder.split(" "); ArrayList<String> coOrds1 = new ArrayList<String>(); for (int counter = 0; counter < info.length; counter = counter+3) { coOrds1.add(info[counter+1]); coOrds1.add(info[counter+2]); } Help and suggestions appreciated. The text file is here but the class receives in a UDP packet from another class so I am unsure if this potentially adds " " at the end or not.

    Read the article

  • PasswordFiled char[] to String in Java connection MySql?

    - by user1819551
    This is a jFrame to connect to the database and this is in the button connect. My issue is in the passwordField NetBeans make me do a char[], but my .getConnection not let me insert the char[] ERROR: "no suitable method found for getConnection(String,String,char[])". So I will change to String right? So when I change and run the jFrame said access denied. when I start doing the System.out.println(l) " Give me the right answer" Like this: "Alex". But when I do the System.out.println(password) "Give me the Array spaces and not the value" Like this: jdbc:mysql://localhost/home inventory root [C@5be5ab68 <--- Array space . What I doing wrong? try { Class.forName("org.gjt.mm.mysql.Driver"); //Load the driver String host = "jdbc:mysql://"+tServerHost.getText()+"/"+tSchema.getText(); String uName = tUsername.getText(); char[] l = pPassword.getPassword(); System.out.println(l); String password= l.toString(); System.out.println(host+uName+l); con = DriverManager.getConnection(host, uName, password); System.out.println(host+uName+password); } catch (SQLException | ClassNotFoundException ex) { JOptionPane.showMessageDialog(this, ex.getMessage()); } }

    Read the article

  • Addiing captions above images in wordpress

    - by jacob
    So I added some code in my css and there are boxes that appear over every image that is attached to a post. I've wanted to number the images and show the image number in the box(1...n). I have this in my functions.php function count_images(){ global $post; $thePostID = $post-ID; $parameters = array( 'post_type' = 'attachment', 'post_parent' = $thePostID, 'post_mime_type' = 'image'); $attachments = get_children($parameters); $content = count($attachments); return $content; } add_filter('the_content','count_images'); function caption_image_callback($matches) { $c = count_images(); for ($i=1; $i <= $c; $i++) { if (is_single()) { return ''.$i.' '; } else { return ''; } } } function caption_image($post_body_content) { $post_body_content = preg_replace_callback("||","caption_image_callback",$post_body_content); return $post_body_content; } if ( current_user_can('edit_plugins') ) { add_filter('the_content', 'caption_image'); } If I run only count_images it will show the correct number of attached images to a post(let's say 15). But for some reason the number that is shown in the boxes over the images is always 1. I've seen this done on several blogs with just php so there has to be a way(even if I have to change my whole code). PS: I had to leave spaces in some places

    Read the article

  • Is there a better way to detab (expand tabs) using Perl?

    - by Uri
    I wanted to detab my source files. (Please, no flame about WHY I wanted to detab my sources. That's not the point :-) I couldn't find a utility to do that. Eclipse didn't do it for me, so I implemented my own. I couldn't fit it into a one liner (-e) program. I came with the following, which did the job just fine. while( <> ) { while( /\t/ ) { s/^(([^\t]{4})*)\t/$1 /; s/^((([^\t]{4})*)[^\t]{1})\t/$1 /; s/^((([^\t]{4})*)[^\t]{2})\t/$1 /; s/^((([^\t]{4})*)[^\t]{3})\t/$1 /; } print; } However, it makes me wonder if Perl - the champion language of processing text - is the right tool. The code doesn't seem very elegant. If I had to detab source that assume tab=8 spaces, the code would look even worse. Specifically because I can think of a deterministic state machine with only 4 states to do the job. I have a feeling that a more elegant solution exists. Am I missing a Perl idiom? In the spirit of TIMTOWTDI I'm curious about the other ways to do it. u.

    Read the article

  • What is the last entry in an unfilled array (C++)?

    - by jwaffe
    I put C++ because I'm just starting in C# and I'm not sure if there's a difference. if you declare an array char arr[10] and fill in values for arr[0] through arr[8], what value will be put in arr[9]? a space ' '? An endline '\n'? '\0'? Or is it nothing at all? I'm asking this because I've always used tactics like this char word[20]; for(count = 0 ; count < 20 ; count++) { cout << word[count]; } to print the entire contents of an array, and I was wondering if I could simplify it (e.g., if the last entry was '\0') by using something like this char word[20]; while(word[count] != '\0') { cout << word[count]; } that way, I wouldn't have to remember how many pieces of data were entered into an array if all the spaces weren't filled up. If you know an even faster way, let me know. I tend to make a bunch of mistakes on arrays.

    Read the article

  • PHP form validation function

    - by Barbs
    I am currently writing some PHP form validation (I have already validated clientside) and have some repetitive code that I think would work well in a nice little PHP function. However I have having trouble getting it to work. I'm sure it's just a matter of syntax but I just can't nail it down. Any help appreciated. //Validate phone number field to ensure 8 digits, no spaces. if(0 === preg_match("/^[0-9]{8}$/",$_POST['Phone']) { $errors['Phone'] = "Incorrect format for 'Phone'"; } if(!$errors) { //Do some stuff here.... } I found that I was writing the validation code a lot and I could save some time and some lines of code by creating a function. //Validate Function function validate($regex,$index,$message) { if(0 === preg_match($regex,$_POST[$index],$message) { $errors[$index] = $message; } And call it like so.... validate("/^[0-9]{8}$/","Phone","Incorrect format for Phone"); Can anyone see why this wouldn't work? Note I have disabled the client side validation while I work on this to try to trigger the error, so the value I am sending for 'Phone' is invalid.

    Read the article

  • Detect some conflictive characters in a string with javascript

    - by FranQ
    Hello. I have a file input in a form that uploads a mp3 file, but I´d like to detect conflictive characters to my system in the filename, like ! @ or any other. All codes I´ve found replace these characters, but I just want to detect them to alert the user. I think it will be easy with regular expressions, but I dont know about them. I´m using jquery/javascript. Thanks in advance for your help Edit to improve my problem description: I´m working in a CodeIgniter application that allows user to upload mp3 files to the server. I use jQuery to manage client side forms. The CI upload class converts spaces in the file name to underscores and everything works. But testing the application I uploaded a mp3 file with a (!) in the name, and I got troubles with it. I just want to insert a javascript conditional before the file is uploaded to evaluate if the user´s filename contains a (!) (or any other I´d like to add later) to ask for the file to be renamed if it does.

    Read the article

  • Program that edits string and prints each word individually with C

    - by Michael_19
    I keep getting the error segmentation fault (core dumped) when I run my progam. #include<stdio.h> #include<stdlib.h> int nextword(char *str); int main(void) { char str[] = "Hello! Today is a beautiful day!!\t\n"; int i = nextword(str); while(i != -1) { printf("%s\n",&(str[i])); i = nextword(NULL); } return 0; } int nextword(char *str) { // create two static variables - these stay around across calls static char *s; static int nextindex; int thisindex; // reset the static variables if (str != NULL) { s = str; thisindex = 0; // TODO: advance this index past any leading spaces while (s[thisindex]=='\n' || s[thisindex]=='\t' || s[thisindex]==' ' ) thisindex++; } else { // set the return value to be the nextindex thisindex = nextindex; } // if we aren't done with the string... if (thisindex != -1) { nextindex = thisindex; // TODO: two things // 1: place a '\0' after the current word // 2: advance nextindex to the beginning // of the next word while (s[nextindex] != ' ' && s[nextindex] != '\0') nextindex++; str[nextindex] = '\0'; nextindex++; } return thisindex; } The goal of the program is to print each word in the string str[] to the console on a new line. I am a beginning programmer and this is an assignment so I must use this type of format (no string library allowed). I just would like to know where I went wrong and how I can fix it.

    Read the article

  • Why won't ruby recognize Haml under ubuntu64 while using jekyll static blog generator?

    - by oldmanjoyce
    I have been trying, quite unsuccessfully, to run henrik's fork of the jekyll static blog generator on Ubuntu 64-bit. I just can't seem to figure this out and I've tried a bunch of different things. Originally I posted this over at stackoverflow, but this is probably the better spot for it. The base stats of my machine: Ubuntu 9.04, 64 bit, ruby 1.8.7 (2008-08-11 patchlevel 72) [x86_64-linux], rubygems 1.3.1. When I attempt to build the site, this is what happens: $ jekyll --pygments Configuration from ./_config.yml Using Sass for CSS generation You must have the haml gem installed first Using rdiscount for Markdown Building site: . - ./_site /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/core_ext.rb:27:in `method_missing': undefined method 'header' for #, page=# ..... cut ..... (NoMethodError) from (haml):9:in `render' from /home/chris/.gem/gems/haml-2.2.3/lib/haml/engine.rb:167:in 'render' from /home/chris/.gem/gems/haml-2.2.3/lib/haml/engine.rb:167:in 'instance_eval' from /home/chris/.gem/gems/haml-2.2.3/lib/haml/engine.rb:167:in 'render' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/convertible.rb:72:in 'render_haml_in_context' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/convertible.rb:105:in 'do_layout' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/post.rb:226:in 'render' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:172:in 'read_posts' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:171:in 'each' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:171:in 'read_posts' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:210:in 'transform_pages' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:126:in 'process' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/jekyll:135 from /home/chris/.gem/bin/jekyll:19:in `load' from /home/chris/.gem/bin/jekyll:19 I added spaces to the left of the ClosedStruct to enable better visibility - sorry that my inline html/formatting isn't perfect. I also cut out some middle text that is just data. $ gem list *** LOCAL GEMS *** actionmailer (2.3.4) actionpack (2.3.4) activerecord (2.3.4) activeresource (2.3.4) activesupport (2.3.4) classifier (1.3.1) directory_watcher (1.2.0) haml (2.2.3) haml-edge (2.3.27) henrik-jekyll (0.5.2) liquid (2.0.0) maruku (0.6.0) open4 (0.9.6) rack (1.0.0) rails (2.3.4) rake (0.8.7) rdiscount (1.3.5) RedCloth (4.2.2) stemmer (1.0.1) syntax (1.0.0) Some showing for path verification: $ echo $PATH /home/chris/.gem/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games $ which haml /home/chris/.gem/bin/haml $ which jekyll /home/chris/.gem/bin/jekyll

    Read the article

  • How to use bzdiff to find difference between 2 bzipped files with diff -I option?

    - by englebip
    I'm trying to do a diff on MySQL dumps (created with mysqldump and piped to bzip2), to see if there are changes between consecutive dumps. The followings are the tails of 2 dumps: tmp1: /*!40101 SET SQL_MODE=@OLD_SQL_MODE */; /*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */; /*!40014 SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS */; /*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */; /*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */; /*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */; /*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */; -- Dump completed on 2011-03-11 1:06:50 tmp2: /*!40101 SET SQL_MODE=@OLD_SQL_MODE */; /*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */; /*!40014 SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS */; /*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */; /*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */; /*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */; /*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */; -- Dump completed on 2011-03-11 0:40:11 When I bzdiff their bzipped version: $ bzdiff tmp?.bz2 10c10 < -- Dump completed on 2011-03-11 1:06:50 --- > -- Dump completed on 2011-03-11 0:40:11 According to the manual of bzdiff, any option passed on to bzdiff is passed on to diff. I therefore looked at the -I option that allows to define a regexp; lines matching it are ignored in the diff. When I then try: $ bzdiff -I'Dump' tmp1.bz2 tmp2.bz2 I get an empty diff. I would like to match as much as possible of the "Dump completed" line, though, but when I then try: $ bzdiff -I'Dump completed' tmp1.bz2 tmp2.bz2 diff: extra operand `/tmp/bzdiff.miCJEvX9E8' diff: Try `diff --help' for more information. Same thing happens for some variations: $ bzdiff '-IDump completed' tmp1.bz2 tmp2.bz2 $ bzdiff '-I"Dump completed"' tmp1.bz2 tmp2.bz2 $ bzdiff -'"IDump completed"' tmp1.bz2 tmp2.bz2 If I diff the un-bzipped files there is no problem: $diff -I'^[-][-] Dump completed on' tmp1 tmp2 gives also an empty diff. bzdiff is a shell script usually placed in /bin/bzdiff. Essentially, it parses the command options and passes them on to diff as follows: OPTIONS= FILES= for ARG do case "$ARG" in -*) OPTIONS="$OPTIONS $ARG";; *) if test -f "$ARG"; then FILES="$FILES $ARG" else echo "${prog}: $ARG not found or not a regular file" exit 1 fi ;; esac done [...] bzip2 -cdfq "$1" | $comp $OPTIONS - "$tmp" I think the problem stems from escaping the spaces in the passing of $OPTIONS to diff, but I couldn't figure out how to get it interpreted correctly. Any ideas? EDIT @DerfK: Good point with the ., I had forgotten about them... I tried the suggestion with the multiple level of quotes, but that is still not recognized: $ bzdiff "-I'\"Dump.completed.on\"'" tmp1.bz2 tmp2.bz2 diff: extra operand `/tmp/bzdiff.Di7RtihGGL'

    Read the article

  • Automating the choice between JPEG and PNG with a script

    - by MHC
    Choosing the right format to save your images in is crucial for preserving image quality and reducing artifacts. Different formats follow different compression methods and come with their own set of advantages and disadvantages. JPG, for instance is suited for real life photographs that are rich in color gradients. The lossless PNG, on the other hand, is far superior when it comes to schematic figures: Picking the right format can be a chore when working with a large number of files. That's why I would love to find a way to automate it. A little bit of background on my particular use case: I am working on a number of handouts for a series of lectures at my unversity. The handouts are rich in figures, which I have to extract from PDF-formatted slides. Extracting these images gives me lossless PNGs, which are needlessly large at times. Converting these particular files to JPEG can reduce their size to up to less than 20% of their original file size, while maintaining the same quality. This is important as working with hundreds of large images in word processors is pretty crash-prone. Batch converting all extracted PNGs to JPEGs is not an option I am willing to follow, as many if not most images are better suited to be formatted as PNGs. Converting these would result in insignificant size reductions and sometimes even increases in filesize - that's at least what my test runs showed. What we can take from this is that file size after compression can serve as an indicator on what format is suited best for a particular image. It's not a particularly accurate predictor, but works well enough. So why not use it in form of a script: I included inotifywait because I would prefer for the script be executed automatically as soon as I drag an extracted image into a folder. This is a simpler version of the script that I've been using for the last couple of weeks: #!/bin/bash inotifywait -m --format "%w%f" --exclude '.jpg' -r -e create -e moved_to --fromfile '/home/MHC/.scripts/Workflow/Conversion/include_inotifywait' | while read file; do mogrify -format jpg -quality 92 "$file" done The advanced version of the script would have to be able to handle spaces in file names and directory names preserve the original file names flatten PNG images if an alpha value is set compare the file size between the temporary converted image and its original determine if the difference is greater than a given precentage act accordingly The actual conversion could be done with imagemagick tools: convert -quality 92 -flatten -background white file.png file.jpg Unfortunately, my bash skills aren't even close to advanced enough to convert the scheme above into an actual script, but I am sure many of you can. My reputation points on here are pretty low, but I will gladly award the most helpful answer with the highest bounty I can set. References: http://www.formortals.com/introducing-cnb-imageguide/, http://www.turnkeylinux.org/blog/png-vs-jpg Edit: Also see my comments below for some more information on why I think this script would be the best solution to the problem I am facing.

    Read the article

  • How to improve this bash shell script for turning hardlinks into symlinks?

    - by MountainX
    This shell script is mostly the work of other people. It has gone through several iterations, and I have tweaked it slightly while also trying to fully understand how it works. I think I understand it now, but I don't have confidence to significantly alter it on my own and risk losing data when I run the altered version. So I would appreciate some expert guidance on how to improve this script. The changes I am seeking are: make it even more robust to any strange file names, if possible. It currently handles spaces in file names, but not newlines. I can live with that (because I try to find any file names with newlines and get rid of them). make it more intelligent about which file gets retained as the actual inode content and which file(s) become sym links. I would like to be able to choose to retain the file that is either a) the shortest path, b) the longest path or c) has the filename with the most alpha characters (which will probably be the most descriptive name). allow it to read the directories to process either from parameters passed in or from a file. optionally, write a long of all changes and/or all files not processed. Of all of these, #2 is the most important for me right now. I need to process some files with it and I need to improve the way it chooses which files to turn into symlinks. (I tried using things like the find option -depth without success.) Here's the current script: #!/bin/bash # clean up known problematic files first. ## find /home -type f -wholename '*Icon* ## *' -exec rm '{}' \; # Configure script environment # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ set -o nounset dir='/SOME/PATH/HERE/' # For each path which has multiple links # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # (except ones containing newline) last_inode= while IFS= read -r path_info do #echo "DEBUG: path_info: '$path_info'" inode=${path_info%%:*} path=${path_info#*:} if [[ $last_inode != $inode ]]; then last_inode=$inode path_to_keep=$path else printf "ln -s\t'$path_to_keep'\t'$path'\n" rm "$path" ln -s "$path_to_keep" "$path" fi done < <( find "$dir" -type f -links +1 ! -wholename '* *' -printf '%i:%p\n' | sort --field-separator=: ) # Warn about any excluded files # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buf=$( find "$dir" -type f -links +1 -path '* *' ) if [[ $buf != '' ]]; then echo 'Some files not processed because their paths contained newline(s):'$'\n'"$buf" fi exit 0

    Read the article

  • nginx 502 bad gateway - fastcgi not listening? (Debian 5)

    - by Sean
    I have experience with nginx but it's always been pre-installed for me (via VPS.net pre-configured image). I really like what it does for me, and now I'm trying to install it on my own server with apt-get. This is a fairly fresh Debian 5 install. I have few extra packages installed but they're all .deb's, no manual compiling or anything crazy going on. Apache is already installed but I disabled it. I did apt-get install nginx and that worked fine. Changed the config around a bit for my needs, although the same problem I'm about to describe happens even with the default config. It took me a while to figure out that the default debian package for nginx doesn't spawn fastcgi processes automatically. That's pretty lame, but I figured out how to do that with this script, which I found posted on many different web sites: #!/bin/bash ## ABSOLUTE path to the PHP binary PHPFCGI="/usr/bin/php5-cgi" ## tcp-port to bind on FCGIPORT="9000" ## IP to bind on FCGIADDR="127.0.0.1" ## number of PHP children to spawn PHP_FCGI_CHILDREN=10 ## number of request before php-process will be restarted PHP_FCGI_MAX_REQUESTS=1000 # allowed environment variables sperated by spaces ALLOWED_ENV="ORACLE_HOME PATH USER" ## if this script is run as root switch to the following user USERID=www-data ################## no config below this line if test x$PHP_FCGI_CHILDREN = x; then PHP_FCGI_CHILDREN=5 fi ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_CHILDREN" ALLOWED_ENV="$ALLOWED_ENV PHP_FCGI_MAX_REQUESTS" ALLOWED_ENV="$ALLOWED_ENV FCGI_WEB_SERVER_ADDRS" if test x$UID = x0; then EX="/bin/su -m -c \"$PHPFCGI -q -b $FCGIADDR:$FCGIPORT\" $USERID" else EX="$PHPFCGI -b $FCGIADDR:$FCGIPORT" fi echo $EX # copy the allowed environment variables E= for i in $ALLOWED_ENV; do E="$E $i=${!i}" done # clean environment and set up a new one nohup env - $E sh -c "$EX" &> /dev/null & When I do a "ps -A | grep php5-cgi", I see the 10 processes running, that should be ready to listen. But when I try to view a web page via nginx, I just get a 502 bad gateway error. After futzing around a bit, I tried telneting to 127.0.0.1 9000 (fastcgi is listening on port 9000, and nginx is configured to talk to that port), but it just immediately closes the connection. This makes me think the problem is with fastcgi, but I'm not sure what I can do to test it. It may just be closing the connection because it's not getting fed any data to process, but it closes immediately so that makes me think otherwise. So... any advice? I can't figure it out. It doesn't help that it's 1AM, but I'm going crazy here!

    Read the article

  • Automatic layout of manual network mapping

    - by Paul
    So I have a small business network mainly consisting of two routed layer-2 domains with a total of ca. 100 devices spread over ca. 2000m² production and office spaces. Typical problems to solve using the graph would be: Over what (cable) path is a PC connected to the server? Where to expect devices connected to a switch port? I want to generate a graph of the physical network topology: Nodes are endpoint devices, switch ports, wall outlets, patch panel ports etc. Edges are cable connections. Ideally, grouping edges (or segments) that pass through the same bundle could be grouped. Also I would like to augment the graph data with automatically gathered data (monitoring state, MAC address, Switch port <- MAC entries to build up parts of the map). At the moment I use graphviz for this inside a Confluence wiki like that: layout = "neato" overlap = scale subgraph { rankdir = "TB" subgraph cluster_r1pf1 { r1pf1 [label="{ Rack 1 PF 1 | { <p1>P1 | <p2>P2 | <p3>P3} }", shape=record] } subgraph cluster_switch1 { switch1 [label="{ Rack 1 Switch 1 | { <p1> P1 | <p1> P1 | <p3> P3} }", shape=record] } r1pf1:p1 -> switch1:p1 (obviously there are dozens of entries omitted here) Problem is: I have a hard time to influence graphviz to generate a bearable layout. Edges overlap so bad that you can't read the diagram anymore. The question is: What other tools (be it interactive like Visio, Omnigraffle or I/O-oriented like graphviz) exist that would allow an easily versionable (as in: Operates on a text file) documentation that is both machine and human readable and editable? Why not OmniGraffle or Visio? Well we don't have Macs and Visio is not available at the moment. To buy it I would need good arguments. Automation would be one of that. But last time I looked, versioning Visio files or even thinking about automatic handling was a nightmare. Related: Network Mapping Tools basically asks the same with a focus on generating the complete graph automatically (but without the need to document cabling connections) Recommendations for automatic computer inventory brings up links of "all-in-one" solutions

    Read the article

  • Triple (3) Monitors under Linux

    - by widgisoft
    I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

    Read the article

  • Switching efficiently between windows, not apps, in OS X

    - by Vultan
    Previous questions have asked "how can I efficiently switch between windows, not applications, in OS X"? (Switching windows on OS X, Switch between windows on Mac OS X? and others). The most recommended suggestions seem to be: Use some combo of cmd-tab and cmd-~. Use Expose, and possibly Spaces Use Witch I spent the money on Witch, and have been using it for a few weeks; it's ok, but it is sometimes slow to respond, sometimes buggy on window order, crashes my system if I disable and re-enable it too many times, and doesn't work properly with X11 apps. The built-in cmd-tab and cmd-~ are ok, but still bring an entire application to the forefront. I find a very common workflow I use is to bounce back and forth between two windows (for example, a browser window and a Thunderbird email in progress), when both apps (the browser and email software) have multiple windows open. I can use Cmd-Tab to get back and forth between apps, but whenever I switch to an app, ALL windows from that app pop up. That suddenly fills my screen with irrelevant data and windows, and often drops those other windows in front of the single window from the other app that I was using and would conveniently like to keep viewing even though it isn't in focus. Expose seems to be the preferred "OS X natural way," but I can't seem to get myself to use it efficiently. I hit F9, and see 10 windows; I then need to squint, try to find the window I want, then use the mouse or the cursor keys to navigate to the one I want. Given the number of power users who say they use Expose, I must be missing the boat here. My goal is not to make this a repeat of previous questions. I'm not asking "what are my alternatives?" (unless I've missed one above!) Rather, I'm asking: what are you, OS X power users, actually doing to handle the use case I described above? Another common use case for me is having multiple Excel spreadsheets open and multiple browser windows open, and I'm rapidly switching back and forth between one spreadsheet in particular and one browser window. Every time I Cmd-Tab, all spreadsheets or all browser windows appear: I don't want to see the ones I'm not working with, and they tend to hide the windows from the alternative app that I don't have in focus but I'd like to at least eyeball. Can you describe what your workflow is like, and how you rapidly and thoughtlessly switch between windows from apps that have multiple windows open?

    Read the article

  • c# Truncate HTML safely for article summary

    - by WickedW
    Hi All, Does anyone have a c# variation of this? This is so I can take some html and display it without breaking as a summary lead in to an article? http://stackoverflow.com/questions/1193500/php-truncate-html-ignoring-tags Save me from reinventing the wheel! Thank you very much ---------- edit ------------------ Sorry, new here, and your right, should have phrased the question better, heres a bit more info I wish to take a html string and truncate it to a set number of words (or even char length) so I can then show the start of it as a summary (which then leads to the main article). I wish to preserve the html so I can show the links etc in preview. The main issue I have to solve is the fact that we may well end up with unclosed html tags if we truncate in the middle of 1 or more tags! The idea I have for solution is to a) truncate the html to N words (words better but chars ok) first (be sure not to stop in the middle of a tag and truncate a require attribute) b) work through the opened html tags in this truncated string (maybe stick them on stack as I go?) c) then work through the closing tags and ensure they match the ones on stack as I pop them off? d) if any open tags left on stack after this, then write them to end of truncated string and html should be good to go!!!! -- edit 12112009 Here is what I have bumbled together so far as a unittest file in VS2008, this 'may' help someone in future My hack attempts based on Jan code are at top for char version + word version (DISCLAIMER: this is dirty rough code!! on my part) I assume working with 'well-formed' HTML in all cases (but not necessarily a full document with a root node as per XML version) Abels XML version is at bottom, but not yet got round to fully getting tests to run on this yet (plus need to understand the code) ... I will update when I get chance to refine having trouble with posting code? is there no upload facility on stack? Thanks for all comments :) using System; using System.Collections.Generic; using System.Text.RegularExpressions; using System.Xml; using System.Xml.XPath; using Microsoft.VisualStudio.TestTools.UnitTesting; namespace PINET40TestProject { [TestClass] public class UtilityUnitTest { public static string TruncateHTMLSafeishChar(string text, int charCount) { bool inTag = false; int cntr = 0; int cntrContent = 0; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrContent == charCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) cntrContent++; } string substr = text.Substring(0, cntr); //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); // to be honest, this seemed like a good idea then I got lost along the way // so logic is probably hanging by a thread!! foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishWord(string text, int wordCount) { bool inTag = false; int cntr = 0; int cntrWords = 0; Char lastc = ' '; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrWords == wordCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) { // do not count double spaces, and a space not in a tag counts as a word if (c == 32 && lastc != 32) cntrWords++; } } string substr = text.Substring(0, cntr) + " ..."; //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishCharXML(string text, int charCount) { // your data, probably comes from somewhere, or as params to a methodint XmlDocument xml = new XmlDocument(); xml.LoadXml(text); // create a navigator, this is our primary tool XPathNavigator navigator = xml.CreateNavigator(); XPathNavigator breakPoint = null; // find the text node we need: while (navigator.MoveToFollowing(XPathNodeType.Text)) { string lastText = navigator.Value.Substring(0, Math.Min(charCount, navigator.Value.Length)); charCount -= navigator.Value.Length; if (charCount <= 0) { // truncate the last text. Here goes your "search word boundary" code: navigator.SetValue(lastText); breakPoint = navigator.Clone(); break; } } // first remove text nodes, because Microsoft unfortunately merges them without asking while (navigator.MoveToFollowing(XPathNodeType.Text)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent, then move the rest navigator.MoveTo(breakPoint); while (navigator.MoveToFollowing(XPathNodeType.Element)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent // then remove *all* empty nodes to clean up (not necessary): // TODO, add empty elements like <br />, <img /> as exclusion navigator.MoveToRoot(); while (navigator.MoveToFollowing(XPathNodeType.Element)) { while (!navigator.HasChildren && (navigator.Value ?? "").Trim() == "") { navigator.DeleteSelf(); } } // moves to parent navigator.MoveToRoot(); return navigator.InnerXml; } [TestMethod] public void TestTruncateHTMLSafeish() { // Case where we just make it to start of HREF (so effectively an empty link) // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>1234</h1><b><i>56789</i>012</b>", TruncateHTMLSafeishChar( @"<h1>1234</h1><b><i>56789</i>012345</b>", 12)); // In middle of a! Assert.AreEqual(@"<h1>1234</h1><a href=""testurl""><b>567</b></a>", TruncateHTMLSafeishChar( @"<h1>1234</h1><a href=""testurl""><b>5678</b></a><i><strong>some italic nested in string</strong></i>", 7)); // more Assert.AreEqual(@"<div><b><i><strong>1</strong></i></b></div>", TruncateHTMLSafeishChar( @"<div><b><i><strong>12</strong></i></b></div>", 1)); // br Assert.AreEqual(@"<h1>1 3 5</h1><br />6", TruncateHTMLSafeishChar( @"<h1>1 3 5</h1><br />678<br />", 6)); } [TestMethod] public void TestTruncateHTMLSafeishWord() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>one two <br /></h1><b><i>three ...</i></b>", TruncateHTMLSafeishWord( @"<h1>one two <br /></h1><b><i>three </i>four</b>", 3), "we have added ' ...' to end of summary"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } [TestMethod] public void TestTruncateHTMLSafeishWordXML() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags string output = TruncateHTMLSafeishCharXML( @"<body><h1>one two </h1><b><i>three </i>four</b></body>", 13); Assert.AreEqual(@"<body>\r\n <h1>one two </h1>\r\n <b>\r\n <i>three</i>\r\n </b>\r\n</body>", output, "XML version, no ... yet and addeds '\r\n + spaces?' to format document"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishCharXML( @"<body><h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i></body>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } } }

    Read the article

  • i am using winsock2.h in c language the following errors are unuderstandable help required?

    - by moon
    i am going to paste here my code an errors :::: #include "stdio.h" #include "winsock2.h" #define SIO_RCVALL _WSAIOW(IOC_VENDOR,1) //this removes the need of mstcpip.h void StartSniffing (SOCKET Sock); //This will sniff here and there void ProcessPacket (unsigned char* , int); //This will decide how to digest void PrintIpHeader (unsigned char* , int); void PrintUdpPacket (unsigned char* , int); void ConvertToHex (unsigned char* , unsigned int); void PrintData (unsigned char* , int); //IP Header Structure typedef struct ip_hdr { unsigned char ip_header_len:4; // 4-bit header length (in 32-bit words) normally=5 (Means 20 Bytes may be 24 also) unsigned char ip_version :4; // 4-bit IPv4 version unsigned char ip_tos; // IP type of service unsigned short ip_total_length; // Total length unsigned short ip_id; // Unique identifier unsigned char ip_frag_offset :5; // Fragment offset field unsigned char ip_more_fragment :1; unsigned char ip_dont_fragment :1; unsigned char ip_reserved_zero :1; unsigned char ip_frag_offset1; //fragment offset unsigned char ip_ttl; // Time to live unsigned char ip_protocol; // Protocol(TCP,UDP etc) unsigned short ip_checksum; // IP checksum unsigned int ip_srcaddr; // Source address unsigned int ip_destaddr; // Source address } IPV4_HDR; //UDP Header Structure typedef struct udp_hdr { unsigned short source_port; // Source port no. unsigned short dest_port; // Dest. port no. unsigned short udp_length; // Udp packet length unsigned short udp_checksum; // Udp checksum (optional) } UDP_HDR; //ICMP Header Structure typedef struct icmp_hdr { BYTE type; // ICMP Error type BYTE code; // Type sub code USHORT checksum; USHORT id; USHORT seq; } ICMP_HDR; FILE *logfile; int tcp=0,udp=0,icmp=0,others=0,igmp=0,total=0,i,j; struct sockaddr_in source,dest; char hex[2]; //Its free! IPV4_HDR *iphdr; UDP_HDR *udpheader; int main() { SOCKET sniffer; struct in_addr addr; int in; char hostname[100]; struct hostent *local; WSADATA wsa; //logfile=fopen("log.txt","w"); //if(logfile==NULL) printf("Unable to create file."); //Initialise Winsock printf("\nInitialising Winsock..."); if (WSAStartup(MAKEWORD(2,2), &wsa) != 0) { printf("WSAStartup() failed.\n"); return 1; } printf("Initialised"); //Create a RAW Socket printf("\nCreating RAW Socket..."); sniffer = socket(AF_INET, SOCK_RAW, IPPROTO_IP); if (sniffer == INVALID_SOCKET) { printf("Failed to create raw socket.\n"); return 1; } printf("Created."); //Retrive the local hostname if (gethostname(hostname, sizeof(hostname)) == SOCKET_ERROR) { printf("Error : %d",WSAGetLastError()); return 1; } printf("\nHost name : %s \n",hostname); //Retrive the available IPs of the local host local = gethostbyname(hostname); printf("\nAvailable Network Interfaces : \n"); if (local == NULL) { printf("Error : %d.\n",WSAGetLastError()); return 1; } for (i = 0; local->h_addr_list[i] != 0; ++i) { memcpy(&addr, local->h_addr_list[i], sizeof(struct in_addr)); printf("Interface Number : %d Address : %s\n",i,inet_ntoa(addr)); } printf("Enter the interface number you would like to sniff : "); scanf("%d",&in); memset(&dest, 0, sizeof(dest)); memcpy(&dest.sin_addr.s_addr,local->h_addr_list[in],sizeof(dest.sin_addr.s_addr)); dest.sin_family = AF_INET; dest.sin_port = 0; printf("\nBinding socket to local system and port 0 ..."); if (bind(sniffer,(struct sockaddr *)&dest,sizeof(dest)) == SOCKET_ERROR) { printf("bind(%s) failed.\n", inet_ntoa(addr)); return 1; } printf("Binding successful"); //Enable this socket with the power to sniff : SIO_RCVALL is the key Receive ALL ;) j=1; printf("\nSetting socket to sniff..."); if (WSAIoctl(sniffer, SIO_RCVALL,&j, sizeof(j), 0, 0,(LPDWORD)&in,0, 0) == SOCKET_ERROR) { printf("WSAIoctl() failed.\n"); return 1; } printf("Socket set."); //Begin printf("\nStarted Sniffing\n"); printf("Packet Capture Statistics...\n"); StartSniffing(sniffer); //Happy Sniffing //End closesocket(sniffer); WSACleanup(); return 0; } void StartSniffing(SOCKET sniffer) { unsigned char *Buffer = ( unsigned char *)malloc(65536); //Its Big! int mangobyte; if (Buffer == NULL) { printf("malloc() failed.\n"); return; } do { mangobyte = recvfrom(sniffer,(char *)Buffer,65536,0,0,0); //Eat as much as u can if(mangobyte > 0) ProcessPacket(Buffer, mangobyte); else printf( "recvfrom() failed.\n"); } while (mangobyte > 0); free(Buffer); } void ProcessPacket(unsigned char* Buffer, int Size) { iphdr = (IPV4_HDR *)Buffer; ++total; switch (iphdr->ip_protocol) //Check the Protocol and do accordingly... { case 1: //ICMP Protocol ++icmp; //PrintIcmpPacket(Buffer,Size); break; case 2: //IGMP Protocol ++igmp; break; case 6: //TCP Protocol ++tcp; //PrintTcpPacket(Buffer,Size); break; case 17: //UDP Protocol ++udp; PrintUdpPacket(Buffer,Size); break; default: //Some Other Protocol like ARP etc. ++others; break; } printf("TCP : %d UDP : %d ICMP : %d IGMP : %d Others : %d Total : %d\r",tcp,udp,icmp,igmp,others,total); } void PrintIpHeader (unsigned char* Buffer, int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; memset(&source, 0, sizeof(source)); source.sin_addr.s_addr = iphdr->ip_srcaddr; memset(&dest, 0, sizeof(dest)); dest.sin_addr.s_addr = iphdr->ip_destaddr; fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); fprintf(logfile," |-IP Version : %d\n",(unsigned int)iphdr->ip_version); fprintf(logfile," |-IP Header Length : %d DWORDS or %d Bytes\n",(unsigned int)iphdr->ip_header_len); fprintf(logfile," |-Type Of Service : %d\n",(unsigned int)iphdr->ip_tos); fprintf(logfile," |-IP Total Length : %d Bytes(Size of Packet)\n",ntohs(iphdr->ip_total_length)); fprintf(logfile," |-Identification : %d\n",ntohs(iphdr->ip_id)); fprintf(logfile," |-Reserved ZERO Field : %d\n",(unsigned int)iphdr->ip_reserved_zero); fprintf(logfile," |-Dont Fragment Field : %d\n",(unsigned int)iphdr->ip_dont_fragment); fprintf(logfile," |-More Fragment Field : %d\n",(unsigned int)iphdr->ip_more_fragment); fprintf(logfile," |-TTL : %d\n",(unsigned int)iphdr->ip_ttl); fprintf(logfile," |-Protocol : %d\n",(unsigned int)iphdr->ip_protocol); fprintf(logfile," |-Checksum : %d\n",ntohs(iphdr->ip_checksum)); fprintf(logfile," |-Source IP : %s\n",inet_ntoa(source.sin_addr)); fprintf(logfile," |-Destination IP : %s\n",inet_ntoa(dest.sin_addr)); } void PrintUdpPacket(unsigned char *Buffer,int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; udpheader = (UDP_HDR *)(Buffer + iphdrlen); fprintf(logfile,"\n\n***********************UDP Packet*************************\n"); PrintIpHeader(Buffer,Size); fprintf(logfile,"\nUDP Header\n"); fprintf(logfile," |-Source Port : %d\n",ntohs(udpheader->source_port)); fprintf(logfile," |-Destination Port : %d\n",ntohs(udpheader->dest_port)); fprintf(logfile," |-UDP Length : %d\n",ntohs(udpheader->udp_length)); fprintf(logfile," |-UDP Checksum : %d\n",ntohs(udpheader->udp_checksum)); fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); PrintData(Buffer,iphdrlen); fprintf(logfile,"UDP Header\n"); PrintData(Buffer+iphdrlen,sizeof(UDP_HDR)); fprintf(logfile,"Data Payload\n"); PrintData(Buffer+iphdrlen+sizeof(UDP_HDR) ,(Size - sizeof(UDP_HDR) - iphdr->ip_header_len*4)); fprintf(logfile,"\n###########################################################"); } void PrintData (unsigned char* data , int Size) { for(i=0 ; i < Size ; i++) { if( i!=0 && i%16==0) //if one line of hex printing is complete... { fprintf(logfile," "); for(j=i-16 ; j<i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); //if its a number or alphabet else fprintf(logfile,"."); //otherwise print a dot } fprintf(logfile,"\n"); } if(i%16==0) fprintf(logfile," "); fprintf(logfile," %02X",(unsigned int)data[i]); if( i==Size-1) //print the last spaces { for(j=0;j<15-i%16;j++) fprintf(logfile," "); //extra spaces fprintf(logfile," "); for(j=i-i%16 ; j<=i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); else fprintf(logfile,"."); } fprintf(logfile,"\n"); } } } following are the errors Error 1 error LNK2019: unresolved external symbol __imp__WSACleanup@0 referenced in function _main sniffer.obj sniffer test Error 2 error LNK2019: unresolved external symbol __imp__closesocket@4 referenced in function _main sniffer.obj sniffer test Error 3 error LNK2019: unresolved external symbol __imp__WSAIoctl@36 referenced in function _main sniffer.obj sniffer test Error 4 error LNK2019: unresolved external symbol __imp__bind@12 referenced in function _main sniffer.obj sniffer test Error 5 error LNK2019: unresolved external symbol __imp__inet_ntoa@4 referenced in function _main sniffer.obj sniffer test Error 6 error LNK2019: unresolved external symbol __imp__gethostbyname@4 referenced in function _main sniffer.obj sniffer test Error 7 error LNK2019: unresolved external symbol __imp__WSAGetLastError@0 referenced in function _main sniffer.obj sniffer test Error 8 error LNK2019: unresolved external symbol __imp__gethostname@8 referenced in function _main sniffer.obj sniffer test Error 9 error LNK2019: unresolved external symbol __imp__socket@12 referenced in function _main sniffer.obj sniffer test Error 10 error LNK2019: unresolved external symbol __imp__WSAStartup@8 referenced in function _main sniffer.obj sniffer test Error 11 error LNK2019: unresolved external symbol __imp__recvfrom@24 referenced in function "void __cdecl StartSniffing(unsigned int)" (?StartSniffing@@YAXI@Z) sniffer.obj sniffer test Error 12 error LNK2019: unresolved external symbol __imp__ntohs@4 referenced in function "void __cdecl PrintIpHeader(unsigned char *,int)" (?PrintIpHeader@@YAXPAEH@Z) sniffer.obj sniffer test Error 13 fatal error LNK1120: 12 unresolved externals E:\CWM\sniffer test\Debug\sniffer test.exe sniffer test

    Read the article

  • Adding A Custom Dropdown in RCDC for Forefront Identity Manager 2010

    - by Daniel Lackey
    My latest exploration has been FIM 2010 for Identity Management. The following is a post of how to add a custom dropdown for the FIM Portal. I have decided to document this as I cannot find documentation on how to do this anywhere else. I hope that it finds useful to others.   For starters, this was to me not an easy task to figure out. I really would like to know why it is so cumbersome to do something that seems like a lot of people would need to do, but that’s for another day J   The dropdown I wanted to add was for ‘Account Status’ which would display if the account is ‘Enabled’ or ‘Disabled’ in the data source Active Directory. This option would also allow helpdesk users or admins to administer the userAccountControl attribute in AD from the FIM Portal interface.   The first thing I had to do was create the attribute itself. This is done by going to Administration à Schema Management from the FIM 2010 portal. Once here, you click on All Attributes. What is listed here are all attributes and their associated Resource Types in FIM. To create the ‘AccountStatus’ attribute, click on New. As shown below, enter ‘AccountStatus’ with no spaces for the System Name and ‘Account Status’ for the Display Name. The Data Type is going to be ‘Indexed String’. Click Next.           Leave everything on the Localization tab default and click Next.   On the Validation tab as shown below, we will enter the regex expression ^(Enabled|Disabled)?$ with our two desired string values ‘Enabled’ and ‘Disabled’. Click on Finish and then and Submit to complete adding the attribute.       The next step involves associating the attribute with a resource type. This is called ‘Binding’ the attribute. From the Schema Management page, click on All Bindings. From the page that comes up, click on New. As shown below, enter ‘User’ for the Resource Type and ‘Account Status’ for the Attribute Type. This is essentially binding the Account Status attribute to the ‘User’ Resource Type. Click Next.    On the ‘Attribute Override’ tab, type in ‘Account Status’ for the Display Name field. Click Next.   On the ‘Localization’ tab, click Next.   On the ‘Validation’ tab, enter the regex expression ^(Enabled|Disabled)?$ we entered previously for the attribute. Click Finish and then Submit to complete.   Now that the Attribute and the Binding are complete, you have to give users permission to see the attribute on the User Edit page. Go to Administration à Management Policy Rules. Look for the rule named Administration: Administrators can read and update Users and click on it. Once it opens, click on the ‘Target Resources’ tab and look at the section named Resource Attributes. Type in at the end the ‘Account Status’ attribute and check it with the validator. Once done click on OK to save the changes.         Lastly, we need to add the actual dropdown control to the RCDC (Resource Control Display Configuration) for User Editing. Go to Administration à Resource Control Display Configuration. From here navigate until you find the RCDC named Configuration for User Editing RCDC and click on it. The following is what you will see:       First step is to export the Configuration Data file. Click on the Export configuration link and save the file to your desktop of other folder.   Find the file you just exported and open the file in your XML editor of choice. I use notepad but anything will work. Since we are adding a dropdown control, first find another control in the existing file that is already a dropdown in FIM. I used EmployeeType as my example. Copy the control from the beginning tag named <my:Control… to the ending tag </my:Control>. Now take what you copied and paste it in whatever location you desire within the form between two other controls. I chose to place the ‘Account Status’ field after the ‘Account Name’ field. After you paste the control you will need to modify so it looks like this:       Notice where you specify what attribute you are dealing with where it has AccountStatus in the XML. Once you are complete with modifying this, save the file and make sure it is a .xml file.   Now go back to the Configuration for User Editing screen and look at the section named ‘Configuration Data’. Click the ‘Browse’ button and find the XML file you just modified and choose it. Click OK on the bottom of the window and you are done!   Now when you click on a user’s name in the FIM Portal, you should see the newly added dropdown box as below:       Later I will post more about this drop down, specifically on how to automate actually ‘Disabling’ the account in the data source through the FIM Workflows and MAs.   <my:Control my:Name="AccountStatus" my:TypeName="UocDropDownList" my:Caption="{Binding Source=schema, Path=AccountStatus.DisplayName}" my:Description="{Binding Source=schema, Path=AccountStatus.Description}" my:RightsLevel="{Binding Source=rights, Path=AccountStatus}"> <my:Properties> <my:Property my:Name="ValuePath" my:Value="Value"/> <my:Property my:Name="CaptionPath" my:Value="Caption"/> <my:Property my:Name="HintPath" my:Value="Hint"/> <my:Property my:Name="ItemSource" my:Value="{Binding Source=schema, Path=AccountStatus.LocalizedAllowedValues}"/> <my:Property my:Name="SelectedValue" my:Value="{Binding Source=object, Path=AccountStatus, Mode=TwoWay}"/> </my:Properties> </my:Control>

    Read the article

  • LWJGL - Eclipse error [on hold]

    - by Zarkopafilis
    When I try to run my lwjgl project, an error pops . Here is the log file: # A fatal error has been detected by the Java Runtime Environment: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d8fcc0a, pid=5612, tid=900 # JRE version: 6.0_16-b01 Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 ) Problematic frame: V [jvm.dll+0xfcc0a] # If you would like to submit a bug report, please visit: http://java.sun.com/webapps/bugreport/crash.jsp # --------------- T H R E A D --------------- Current thread (0x016b9000): JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] siginfo: ExceptionCode=0xc0000005, reading address 0x00000000 Registers: EAX=0x00000000, EBX=0x00000000, ECX=0x00000006, EDX=0x00000000 ESP=0x001af4d4, EBP=0x001af524, ESI=0x016b9000, EDI=0x016b9110 EIP=0x6d8fcc0a, EFLAGS=0x00010246 Top of Stack: (sp=0x001af4d4) 0x001af4d4: 6da44bd8 016b9110 00000000 001af668 0x001af4e4: ffffffff 22200000 001af620 76ec39c2 0x001af4f4: 001af524 6d801086 0000000b 001afd34 0x001af504: 016b9000 016dd990 016b9000 00000000 0x001af514: 001af5f4 6d9ee000 6d9ef2f0 ffffffff 0x001af524: 001af58c 10008c85 016b9110 00000000 0x001af534: 00000000 000a0554 00000000 00000024 0x001af544: 00000000 00000000 001af6ac 00000000 Instructions: (pc=0x6d8fcc0a) 0x6d8fcbfa: e8 e8 d0 1d 08 00 8b 45 10 c7 45 d8 0b 00 00 00 0x6d8fcc0a: 8b 00 8b 48 08 0f b7 51 26 8b 40 0c 8b 4c 90 20 Stack: [0x00160000,0x001b0000], sp=0x001af4d4, free space=317k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [jvm.dll+0xfcc0a] C [lwjgl.dll+0x8c85] C [USER32.dll+0x18876] C [USER32.dll+0x170f4] C [USER32.dll+0x1119e] C [ntdll.dll+0x460ce] C [USER32.dll+0x10e29] C [USER32.dll+0x10e84] C [lwjgl.dll+0x1cf0] j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub V [jvm.dll+0xecf9c] V [jvm.dll+0x1741e1] V [jvm.dll+0xed01d] V [jvm.dll+0xf5be5] V [jvm.dll+0xfd83d] C [javaw.exe+0x2155] C [javaw.exe+0x833e] C [kernel32.dll+0x51154] C [ntdll.dll+0x5b2b9] C [ntdll.dll+0x5b28c] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j org.lwjgl.opengl.WindowsDisplay.nCreateWindow(IIIIZZJ)J+0 j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( = current thread ) 0x0179a400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4460, stack(0x0b900000,0x0b950000)] 0x01795400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5264, stack(0x0b8b0000,0x0b900000)] 0x01790c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=6080, stack(0x0b860000,0x0b8b0000)] 0x01786400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1204, stack(0x0b810000,0x0b860000)] 0x01759c00 JavaThread "Finalizer" daemon [_thread_blocked, id=5772, stack(0x0b7c0000,0x0b810000)] 0x01755000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4696, stack(0x01640000,0x01690000)] =0x016b9000 JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] Other Threads: 0x01751c00 VMThread [stack: 0x015f0000,0x01640000] [id=4052] 0x0179c800 WatcherThread [stack: 0x0b950000,0x0b9a0000] [id=3340] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 960K, used 816K [0x037c0000, 0x038c0000, 0x03ca0000) eden space 896K, 91% used [0x037c0000, 0x0388c2c0, 0x038a0000) from space 64K, 0% used [0x038a0000, 0x038a0000, 0x038b0000) to space 64K, 0% used [0x038b0000, 0x038b0000, 0x038c0000) tenured generation total 4096K, used 0K [0x03ca0000, 0x040a0000, 0x077c0000) the space 4096K, 0% used [0x03ca0000, 0x03ca0000, 0x03ca0200, 0x040a0000) compacting perm gen total 12288K, used 2143K [0x077c0000, 0x083c0000, 0x0b7c0000) the space 12288K, 17% used [0x077c0000, 0x079d7e38, 0x079d8000, 0x083c0000) No shared spaces configured. Dynamic libraries: 0x00400000 - 0x00424000 C:\Program Files\Java\jre6\bin\javaw.exe 0x77550000 - 0x7768e000 C:\Windows\SYSTEM32\ntdll.dll 0x75a80000 - 0x75b54000 C:\Windows\system32\kernel32.dll 0x758d0000 - 0x7591b000 C:\Windows\system32\KERNELBASE.dll 0x759e0000 - 0x75a80000 C:\Windows\system32\ADVAPI32.dll 0x76070000 - 0x7611c000 C:\Windows\system32\msvcrt.dll 0x77250000 - 0x77269000 C:\Windows\SYSTEM32\sechost.dll 0x771a0000 - 0x77241000 C:\Windows\system32\RPCRT4.dll 0x76eb0000 - 0x76f79000 C:\Windows\system32\USER32.dll 0x76e60000 - 0x76eae000 C:\Windows\system32\GDI32.dll 0x77770000 - 0x7777a000 C:\Windows\system32\LPK.dll 0x75fd0000 - 0x7606e000 C:\Windows\system32\USP10.dll 0x770b0000 - 0x770cf000 C:\Windows\system32\IMM32.DLL 0x770d0000 - 0x7719c000 C:\Windows\system32\MSCTF.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da8b000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x73a00000 - 0x73a32000 C:\Windows\system32\WINMM.dll 0x75610000 - 0x7565b000 C:\Windows\system32\apphelp.dll 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x776e0000 - 0x776e5000 C:\Windows\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x10000000 - 0x1004c000 C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows\lwjgl.dll 0x5d170000 - 0x5d238000 C:\Windows\system32\OPENGL32.dll 0x6e7b0000 - 0x6e7d2000 C:\Windows\system32\GLU32.dll 0x70620000 - 0x70707000 C:\Windows\system32\DDRAW.dll 0x70610000 - 0x70616000 C:\Windows\system32\DCIMAN32.dll 0x75b60000 - 0x75cfd000 C:\Windows\system32\SETUPAPI.dll 0x759b0000 - 0x759d7000 C:\Windows\system32\CFGMGR32.dll 0x76d70000 - 0x76dff000 C:\Windows\system32\OLEAUT32.dll 0x75db0000 - 0x75f0c000 C:\Windows\system32\ole32.dll 0x758b0000 - 0x758c2000 C:\Windows\system32\DEVOBJ.dll 0x74060000 - 0x74073000 C:\Windows\system32\dwmapi.dll 0x74b60000 - 0x74b69000 C:\Windows\system32\VERSION.dll 0x745f0000 - 0x7478e000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\COMCTL32.dll 0x75d50000 - 0x75da7000 C:\Windows\system32\SHLWAPI.dll 0x74370000 - 0x743b0000 C:\Windows\system32\uxtheme.dll 0x22200000 - 0x22206000 C:\Program Files\ESET\ESET Smart Security\eplgHooks.dll VM Arguments: jvm_args: -Djava.library.path=C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows -Dfile.encoding=Cp1253 java_command: zarkopafilis.koding.io.javafx.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:/Program Files/Java/jre6/lib/i386;C:\Perl\site\bin;C:\Perl\bin;C:\Ruby200\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Windows Live\Shared;C:\Users\theo\Desktop\eclipse; USERNAME=theo OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 5, GenuineIntel --------------- S Y S T E M --------------- OS: Windows 7 Build 7600 CPU:total 4 (8 cores per cpu, 2 threads per core) family 6 model 37 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, ht Memory: 4k page, physical 2097151k(1257972k free), swap 4194303k(4194303k free) vm_info: Java HotSpot(TM) Client VM (14.2-b01) for windows-x86 JRE (1.6.0_16-b01), built on Jul 31 2009 11:26:58 by "java_re" with MS VC++ 7.1 time: Wed Oct 23 22:00:12 2013 elapsed time: 0 seconds Code: Display.setDisplayMode(new DisplayMode(800,600)); Display.create();//Error here I am using JDK 6

    Read the article

  • Parallelism in .NET – Part 12, More on Task Decomposition

    - by Reed
    Many tasks can be decomposed using a Data Decomposition approach, but often, this is not appropriate.  Frequently, decomposing the problem into distinctive tasks that must be performed is a more natural abstraction. However, as I mentioned in Part 1, Task Decomposition tends to be a bit more difficult than data decomposition, and can require a bit more effort.  Before we being parallelizing our algorithm based on the tasks being performed, we need to decompose our problem, and take special care of certain considerations such as ordering and grouping of tasks. Up to this point in this series, I’ve focused on parallelization techniques which are most appropriate when a problem space can be decomposed by data.  Using PLINQ and the Parallel class, I’ve shown how problem spaces where there is a collection of data, and each element needs to be processed, can potentially be parallelized. However, there are many other routines where this is not appropriate.  Often, instead of working on a collection of data, there is a single piece of data which must be processed using an algorithm or series of algorithms.  Here, there is no collection of data, but there may still be opportunities for parallelism. As I mentioned before, in cases like this, the approach is to look at your overall routine, and decompose your problem space based on tasks.  The idea here is to look for discrete “tasks,” individual pieces of work which can be conceptually thought of as a single operation. Let’s revisit the example I used in Part 1, an application startup path.  Say we want our program, at startup, to do a bunch of individual actions, or “tasks”.  The following is our list of duties we must perform right at startup: Display a splash screen Request a license from our license manager Check for an update to the software from our web server If an update is available, download it Setup our menu structure based on our current license Open and display our main, welcome Window Hide the splash screen The first step in Task Decomposition is breaking up the problem space into discrete tasks. This, naturally, can be abstracted as seven discrete tasks.  In the serial version of our program, if we were to diagram this, the general process would appear as: These tasks, obviously, provide some opportunities for parallelism.  Before we can parallelize this routine, we need to analyze these tasks, and find any dependencies between tasks.  In this case, our dependencies include: The splash screen must be displayed first, and as quickly as possible. We can’t download an update before we see whether one exists. Our menu structure depends on our license, so we must check for the license before setting up the menus. Since our welcome screen will notify the user of an update, we can’t show it until we’ve downloaded the update. Since our welcome screen includes menus that are customized based off the licensing, we can’t display it until we’ve received a license. We can’t hide the splash until our welcome screen is displayed. By listing our dependencies, we start to see the natural ordering that must occur for the tasks to be processed correctly. The second step in Task Decomposition is determining the dependencies between tasks, and ordering tasks based on their dependencies. Looking at these tasks, and looking at all the dependencies, we quickly see that even a simple decomposition such as this one can get quite complicated.  In order to simplify the problem of defining the dependencies, it’s often a useful practice to group our tasks into larger, discrete tasks.  The goal when grouping tasks is that you want to make each task “group” have as few dependencies as possible to other tasks or groups, and then work out the dependencies within that group.  Typically, this works best when any external dependency is based on the “last” task within the group when it’s ordered, although that is not a firm requirement.  This process is often called Grouping Tasks.  In our case, we can easily group together tasks, effectively turning this into four discrete task groups: 1. Show our splash screen – This needs to be left as its own task.  First, multiple things depend on this task, mainly because we want this to start before any other action, and start as quickly as possible. 2. Check for Update and Download the Update if it Exists - These two tasks logically group together.  We know we only download an update if the update exists, so that naturally follows.  This task has one dependency as an input, and other tasks only rely on the final task within this group. 3. Request a License, and then Setup the Menus – Here, we can group these two tasks together.  Although we mentioned that our welcome screen depends on the license returned, it also depends on setting up the menu, which is the final task here.  Setting up our menus cannot happen until after our license is requested.  By grouping these together, we further reduce our problem space. 4. Display welcome and hide splash - Finally, we can display our welcome window and hide our splash screen.  This task group depends on all three previous task groups – it cannot happen until all three of the previous groups have completed. By grouping the tasks together, we reduce our problem space, and can naturally see a pattern for how this process can be parallelized.  The diagram below shows one approach: The orange boxes show each task group, with each task represented within.  We can, now, effectively take these tasks, and run a large portion of this process in parallel, including the portions which may be the most time consuming.  We’ve now created two parallel paths which our process execution can follow, hopefully speeding up the application startup time dramatically. The main point to remember here is that, when decomposing your problem space by tasks, you need to: Define each discrete action as an individual Task Discover dependencies between your tasks Group tasks based on their dependencies Order the tasks and groups of tasks

    Read the article

  • 8 Backup Tools Explained for Windows 7 and 8

    - by Chris Hoffman
    Backups on Windows can be confusing. Whether you’re using Windows 7 or 8, you have quite a few integrated backup tools to think about. Windows 8 made quite a few changes, too. You can also use third-party backup software, whether you want to back up to an external drive or back up your files to online storage. We won’t cover third-party tools here — just the ones built into Windows. Backup and Restore on Windows 7 Windows 7 has its own Backup and Restore feature that lets you create backups manually or on a schedule. You’ll find it under Backup and Restore in the Control Panel. The original version of Windows 8 still contained this tool, and named it Windows 7 File Recovery. This allowed former Windows 7 users to restore files from those old Windows 7 backups or keep using the familiar backup tool for a little while. Windows 7 File Recovery was removed in Windows 8.1. System Restore System Restore on both Windows 7 and 8 functions as a sort of automatic system backup feature. It creates backup copies of important system and program files on a schedule or when you perform certain tasks, such as installing a hardware driver. If system files become corrupted or your computer’s software becomes unstable, you can use System Restore to restore your system and program files from a System Restore point. This isn’t a way to back up your personal files. It’s more of a troubleshooting feature that uses backups to restore your system to its previous working state. Previous Versions on Windows 7 Windows 7′s Previous Versions feature allows you to restore older versions of files — or deleted files. These files can come from backups created with Windows 7′s Backup and Restore feature, but they can also come from System Restore points. When Windows 7 creates a System Restore point, it will sometimes contain your personal files. Previous Versions allows you to extract these personal files from restore points. This only applies to Windows 7. On Windows 8, System Restore won’t create backup copies of your personal files. The Previous Versions feature was removed on Windows 8. File History Windows 8 replaced Windows 7′s backup tools with File History, although this feature isn’t enabled by default. File History is designed to be a simple, easy way to create backups of your data files on an external drive or network location. File History replaces both Windows 7′s Backup and Previous Versions features. Windows System Restore won’t create copies of personal files on Windows 8. This means you can’t actually recover older versions of files until you enable File History yourself — it isn’t enabled by default. System Image Backups Windows also allows you to create system image backups. These are backup images of your entire operating system, including your system files, installed programs, and personal files. This feature was included in both Windows 7 and Windows 8, but it was hidden in the preview versions of Windows 8.1. After many user complaints, it was restored and is still available in the final version of Windows 8.1 — click System Image Backup on the File History Control Panel. Storage Space Mirroring Windows 8′s Storage Spaces feature allows you to set up RAID-like features in software. For example, you can use Storage Space to set up two hard disks of the same size in a mirroring configuration. They’ll appear as a single drive in Windows. When you write to this virtual drive, the files will be saved to both physical drives. If one drive fails, your files will still be available on the other drive. This isn’t a good long-term backup solution, but it is a way of ensuring you won’t lose important files if a single drive fails. Microsoft Account Settings Backup Windows 8 and 8.1 allow you to back up a variety of system settings — including personalization, desktop, and input settings. If you’re signing in with a Microsoft account, OneDrive settings backup is enabled automatically. This feature can be controlled under OneDrive > Sync settings in the PC settings app. This feature only backs up a few settings. It’s really more of a way to sync settings between devices. OneDrive Cloud Storage Microsoft hasn’t been talking much about File History since Windows 8 was released. That’s because they want people to use OneDrive instead. OneDrive — formerly known as SkyDrive — was added to the Windows desktop in Windows 8.1. Save your files here and they’ll be stored online tied to your Microsoft account. You can then sign in on any other computer, smartphone, tablet, or even via the web and access your files. Microsoft wants typical PC users “backing up” their files with OneDrive so they’ll be available on any device. You don’t have to worry about all these features. Just choose a backup strategy to ensure your files are safe if your computer’s hard disk fails you. Whether it’s an integrated backup tool or a third-party backup application, be sure to back up your files.

    Read the article

  • Kaiden and the Arachnoid Cyst

    - by Martin Hinshelwood
    Some of you may remember when my son Kaiden was born I posted pictures of him and his sister. Kaiden is now 15 months old and is progressing perfectly in every area except that and we had been worried that he was not walking yet. We were only really concerned as his sister was walking at 8 months. Figure: Kai as his usual self   Jadie and I were concerned over that and that he had a rather large head (noggin) so we talked to various GP’s and our health visitor who immediately dismissed our concerns every time. That was until about two months ago when we happened to get a GP whose daughter had Hyper Mobility and she recognised the symptoms immediately. We were referred to the Southbank clinic who were lovely and the paediatrician confirmed that he had Hyper Mobility after testing all of his faculties. This just means that his joints are overly mobile and would need a little physiotherapy to help him out. At the end the paediatrician remarked offhand that he has a rather large head and wanted to measure it. Sure enough he was a good margin above the highest percentile mark for his height and weight. The paediatrician showed the measurements to a paediatric consultant who, as a precautionary measure, referred us for an MRI at Yorkhill Children's hospital. Now, Yorkhill has always been fantastic to us, and this was no exception. You know we have NEVER had a correct diagnosis for the kids (with the exception of the above) from a GP and indeed twice have been proscribed incorrect medication that made the kids sicker! We now always go strait to Yorkhill to save them having to fix GP mistakes as well. Monday 24th May, 7pm The scan went fantastically, with Kaiden sleeping in the MRI machine for all but 5 minutes at the end where he waited patiently for it to finish. We were not expecting anything to be wrong as this was just a precautionary scan to make sure that nothing in his head was affecting his gross motor skills. After the scan we were told to expect a call towards the end of the week… Tuesday 25th May, 12pm The very next day we got a call from Southbank who said that they has found an Arachnoid Cyst and could we come in the next day to see a Consultant and that Kai would need an operation. Wednesday 26th May, 12:30pm We went into the Southbank clinic and spoke to the paediatric consultant who assured us that it was operable but that it was taking up considerable space in Kai’s head. Cerebrospinal fluid is building up as a cyst is blocking the channels it uses to drain. Thankfully they told us that prospects were good and that Kai would expect to make a full recovery before showing us the MRI pictures. Figure: Normal brain MRI cross section. This normal scan shows the spaces in the middle of the brain that contain and produce the Cerebrospinal fluid. Figure: Normal Cerebrospinal Flow This fluid is needed by the brain but is drained in the middle down the spinal column. Figure: Kai’s cyst blocking the four channels. I do not think that I need to explain the difference between the healthy picture and Kai’s picture. However you can see in this first picture the faint outline of the cyst in the middle that is blocking the four channels from draining. After seeing the scans a Neurosurgeon has decided that he is not acute, but needs an operation to unblock the flow. Figure: OMFG! You can see in the second picture the effect of the build up of fluid. If I was not horrified by the first picture I was seriously horrified by this one. What next? Kai is not presenting the symptoms of vomiting or listlessness that would show an immediate problem and as such we will get an appointment to see the Paediatric Neurosurgeon at the Southern General hospital in about 4 weeks. This timescale is based on the Neurosurgeon seeing the scans. After that Kai will need an operation to release the pressure and either remove the cyst completely or put in a permanent shunt (tube from brain to stomach) to bypass the blockage. We have updated his notes for the referral with additional recent information on top of the scan that the consultant things will help improve the timescales, but that is just a guess.   All we can do now is wait and see, and be watchful for tell tail signs of listlessness, eye problems and vomiting that would signify a worsening of his condition.   Technorati Tags: Personal

    Read the article

  • Logical Domain Modeling Made Simple

    - by Knut Vatsendvik
    How can logical domain modeling be made simple and collaborative? Many non-technical end-users, managers and business domain experts find it difficult to understand the visual models offered by many UML tools. This creates trouble in capturing and verifying the information that goes into a logical domain model. The tools are also too advanced and complex for a non-technical user to learn and use. We have therefore, in our current project, ended up with using Confluence as tool for designing the logical domain model with the help of a few very useful plugins. Big thanks to Ole Nymoen and Per Spilling for their expertise in this field that made this posting possible. Confluence Plugins Here is a list of Confluence plugins used in this solution. Install these before trying out the macros used below. Plugin Description Copy Space Allows a space administrator to copy a space, including the pages within the space Metadata Supports adding metadata to Wiki pages Label Manages labeling of pages Linking Contains macros for linking to templates, the dashboard and other Table Enhances the table capability in Confluence Creating a Confluence Space First we need to create a new confluence space for the domain model. Click the link Create a Space located below the list of spaces on the Dashboard. Please contact your Confluence administrator is you do not have permissions to do this.   For illustrative purpose all attributes and entities in this posting are based on my imaginary project manager domain model. When a logical domain model is good enough for being implemented, do a copy of the Confluence Space (see Copy Space plugin). In this way you create a stable version of the logical domain model while further design can continue with the new copied space. Typical will the implementation phase result in a database design and/or a XSD schema design. Add Space Templates Go to the Home page of your Confluence Space. Navigate to the Browse drop-down menu and click on Advanced. Then click the Templates option in the left navigation panel. Click Add New Space Template to add the following three templates. Name: attribute {metadata-list} || Name | | || Type | | || Format | | || Description | | {metadata-list} {add-label:attribute} Name: primary-type {metadata-list} || Name | || || Type | || || Format | || || Description | || {metadata-list} {add-label:primary-type} Name: complex-type {metadata-list} || Name | || || Description |  || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | {add-label:complex-type,entity} The metadata-list macro (see Metadata plugin) will save a list of metadata values to the page. The add-label macro (see Label plugin) will automatically label the page. Primary Types Page Our first page to add will act as container for our primary types. Switch to Wiki markup when adding the following content to the page. | (+) {add-page:template=primary-type|parent=@self}Add new primary type{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|root=@self|pages=@descendents} Once the page is created, click the Add new primary type (create-page macro) to start creating a new pages. Here is an example of input to the LocalDate page. Embrace the LocalDate with square brackets [] to make the page linkable. Again switch to Wiki markup before editing. {metadata-list} || Name | [LocalDate] || || Type | Date || || Format | YYYY-MM-DD || || Description | Date in local time zone. YYYY = year, MM = month and DD = day || {metadata-list} {add-label:primary-type} The metadata-report macro will show a tabular report of all child pages.   Attributes Page The next page will act as container for all of our attributes. | (+) {add-page:template=attribute|parent=@self|title=attribute}Add new attribute{add-page} | {metadata-report:Name,Type,Format,Description|sort=Name|pages=@descendants} Here is an example of input to the startDate page. {metadata-list} || Name | [startDate] || || Type | [LocalDate] || || Format | {metadata-from:LocalDate|Format} || || Description | The projects start date || {metadata-list} {add-label:attribute} Using the metadata-from macro we fetch the text from the previously created LocalDate page. Complex Types Page The last page in this example shows how attributes can be combined together to form more complex types.   h3. Intro Overview of complex types in the domain model. | (+) {add-page:template=complex-type|parent=@self}Add a new complex type{add-page}\\ | {metadata-report:Name,Description|sort=Name|root=@self|pages=@descendents} Here is an example of input to the ProjectType page. {metadata-list} || Name | [ProjectType] || || Description | Represents a project || {metadata-list} h3. Attributes || Name || Type || Format || Description || | [projectId] | {metadata-from:projectId|Type} | {metadata-from:projectId|Format} | {metadata-from:projectId|Description} | | [name] | {metadata-from:name|Type} | {metadata-from:name|Format} | {metadata-from:name|Description} | | [description] | {metadata-from:description|Type} | {metadata-from:description|Format} | {metadata-from:description|Description} | | [startDate] | {metadata-from:startDate|Type} | {metadata-from:startDate|Format} | {metadata-from:startDate|Description} | {add-label:complex-type,entity} Gives us this Conclusion Using a web-based corporate Wiki like Confluence to create a logical domain model increases the collaboration between people with different roles in the enterprise. It’s my believe that this helps the domain model to be more accurate, and better documented. In our real project we have more pages than illustrated here to complete the documentation. We do also still use UML tools to create different types of diagrams that Confluence do not support. As a last tip, an ImageMap plugin can make those diagrams clickable when used in pages. Enjoy!

    Read the article

  • Part 14: Execute a PowerShell script

    In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application With PowerShell you can add powerful scripting to your build to for example execute a deployment. If you want more information on PowerShell, please refer to http://technet.microsoft.com/en-us/library/aa973757.aspx For this example we will create a simple PowerShell script that prints “Hello world!”. To create the script, create a new text file and name it “HelloWorld.ps1”. Add to the contents of the script: Write-Host “Hello World!” To test the script do the following: Open the command prompt To run the script you must change the execution policy. To do this execute in the command prompt: powershell set-executionpolicy remotesigned Now go to the directory where you have saved the PowerShell script Execute the following command powershell .\HelloWorld.ps1 In this example I use a relative path, but when the path to the PowerShell script contains spaces, you need to change the syntax to powershell "& '<full path to script>' " for example: powershell "& ‘C:\sources\Build Customization\SolutionToBuild\PowerShell Scripts\HellloWorld.ps1’ " In this blog post, I create a new solution and that solution includes also this PowerShell script. I want to create an argument on the Build Process Template that holds the path to the PowerShell script. In the Build Process Template I will add an InvokeProcess activity to execute the PowerShell command. This InvokeProcess activity needs the location of the script as an argument for the PowerShell command. Since you don’t know the full path at the build server of this script, you can either specify in the argument the relative path of the script, but it is hard to find out what the relative path is. I prefer to specify the location of the script in source control and then convert that server path to a local path. To do this conversion you can use the ConvertWorkspaceItem activity. So to complete the task, open the Build Process Template CustomTemplate.xaml that we created in earlier parts, follow the following steps Add a new argument called “DeploymentScript” and set the appropriate settings in the metadata. See Part 2: Add arguments and variables  for more information. Scroll down beneath the TryCatch activity called “Try Compile, Test, and Associate Changesets and Work Items” Add a new If activity and set the condition to "Not String.IsNullOrEmpty(DeploymentScript)" to ensure it will only run when the argument is passed. Add in the Then branch of the If activity a new Sequence activity and rename it to “Start deployment” Click on the activity and add a new variable called DeploymentScriptFilename (scoped to the “Start deployment” Sequence Add a ConvertWorkspaceItem activity on the “Start deployment” Sequence Add a InvokeProcess activity beneath the ConvertWorkspaceItem activity in the “Start deployment” Sequence Click on the ConvertWorkspaceItem activity and change the properties DisplayName = Convert deployment script filename Input = DeploymentScript Result = DeploymentScriptFilename Workspace = Workspace Click on the InvokeProcess activity and change the properties Arguments = String.Format(" ""& '{0}' "" ", DeploymentScriptFilename) DisplayName = Execute deployment script FileName = "PowerShell" To see results from the powershell command drop a WriteBuildMessage activity on the "Handle Standard Output" and pass the stdOutput variable to the Message property. Do the same for a WriteBuildError activity on the "Handle Error Output" To publish it, check in the Build Process Template This leads to the following result We now go to the build definition that depends on the template and set the path of the deployment script to the server path to the HelloWorld.ps1. (If you want to see the result of the PowerShell script, change the Logging verbosity to Detailed or Diagnostic). Save and run the build. A lot of the deployment scripts you have will have some kind of arguments (like username / password or environment variables) that you want to define in the Build Definition. To make the PowerShell configurable, you can follow the following steps. Create a new script and give it the name "HelloWho.ps1". In the contents of the file add the following lines: param (         $person     ) $message = [System.String]::Format(“Hello {0}!", $person) Write-Host $message When you now run the script on the command prompt, you will see the following So lets change the Build Process Template to accept one parameter for the deployment script. You can of course make it configurable to add a for-loop that reads through a collection of parameters but that is out of scope of this blog post. Add a new Argument called DeploymentScriptParameter In the InvokeProcess activity where the PowerShell command is executed, modify the Arguments property to String.Format(" ""& '{0}' '{1}' "" ", DeploymentScriptFilename, DeploymentScriptParameter) Check in the Build Process Template Now modify the build definition and set the Parameter of the deployment to any value and run the build. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >