Search Results

Search found 1832 results on 74 pages for 'viewer'.

Page 54/74 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • Outlook 2007 unable to connect to exchange server

    - by mattwarren
    I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. Update: I've just tried logging onto a completely different PC, using my domain controller user-name/password. When I setup outlook on there it also fails, so the problem isn't specific to 1 pc/outlook it's something about my particular user name, but not when using OWA? What else can I do to diagnose this, any suggestions?

    Read the article

  • The Message Queuing service failed to join the computer's domain 'DOMAIN' Error 0xc00e0025

    - by SimonGoldstone
    Struggling to get MSMQ installed in Domain Integration mode on Windows 2012 (Azure). So far, I've provisioned a brand new Windows Server 2012 (R2) machine on the Azure platform and installed the Active Directory role and promoted the machine to a domain controller. Once the AD was in place, I then added the MSMQ feature, along with the Directory Integration add on. However, it will not install in AD integration mode. It will only work in Workgroup mode. I can verify this by running the following powershell command: New-MSMQQueue -name Queue1 -queuetype Public When I run this command, I get the following error: New-MsmqQueue : A workgroup installation computer does not support the operation. The event viewer reveals to errors in the Application log: 1. The Message Queuing service failed to join the computer's domain 'DOMAIN'. Error 0xc00e0025: 2. Message Queuing was unable to create the msmq (MSMQ Configuration) object in Active Directory Domain Services. Error c00e0025h: I'm struggling here. Any advice?

    Read the article

  • Failed Backup Job With Backup Exec 12 and AOFO

    - by Mort
    I am backing up a Windows 2003 Small Business Server with SP2. We are running Backup Exec 12 with SP4. Recently the backup job started failing on backing up the system state with the following error: V-79-57344-34110 - AOFO: Initialization failure on: "System?State". Advanced Open File Option used: Microsoft Volume Shadow Copy Service (VSS). Snapshot provider error (0xE000FE7D): Access is denied. To back up or restore System State, administrator privileges are required. Check the Windows Event Viewer for details. Upon review of Symantec's website the error indicates a credential problem. However when I test the credentials they come back with no failures. I have found another forum here referencing a similar error and have tried what has been indicated with no succesful results. I have created new jobs based on new selection lists with no succesful results. I suspect a new update possibly from Microsoft may be causing this but I have no idea which one. I am looking for feedback. Thanks.

    Read the article

  • Event ID: 861 - The Windows Firewall has detected an application listening for incoming traffic

    - by Chris Marisic
    Firstly, my machines aren't compromised any person suggesting such will be DV'd. The security logs on some of my networks client machines (all Windows Xp Sp3) get filled with these useless error messages. Security Failure Audit Detailed Tracking Event ID: 861 User: NT AUTHORITY\NETWORK SERVICE The Windows Firewall has detected an application listening for incoming traffic. Name: - Path: C:\WINDOWS\system32\svchost.exe Process identifier: 976 User account: NETWORK SERVICE User domain: NT AUTHORITY Service: Yes RPC server: No IP version: IPv4 IP protocol: UDP Port number: 55035 Allowed: No User notified: No It's always on various random ports of UDP so setting up a port exception isn't really an option. It's always from svchost or lsass both of which are running services from DLLs. One of the most offending processes seems to the be DnsCache. I have in my global policy under AT < Network < Network Connection < Widnows Firewall < Domain Profile (I haven't changed any standard profile options do both need configured? To allow remote administration and desktop exceptions and have a custom program exception list that has %SystemRoot%\system32\svchost.exe:*:enabled:svchost (Windows won't allow you to add this exception on a local machine but it let me have it on here in the global policy it just doesn't seem to do anything) %SystemRoot%\system32\lsass.exe:*enabled:lsass (I think this one ended all of my LSASS messages) %SystemRoot%\system32\dnsrslvr.dll:*:enabled:dnscache (I tried adding the dll itself to the exception list, this didn't seem to do anything) Is there really any other options left other than disabling the Windows Firewall entirely, disabling auditing entirely or just changing the event viewer to just auto overwrite when needed? I'd much rather fix the problem and get rid of these entries ever being created instead of just trying to cover up the problem.

    Read the article

  • System State Backups using NTbackup fail with error 0x800423f4 (relating to volume shadow copy)

    - by Paul Zimmerman
    We have a Windows Server 2003 R2 running Service Pack 2. It is a domain controller (Global Catalog) and our main internal DNS server. We run a System State backup of the machine to back up Active Directory information and save the backup to a different server. This server has a single drive (C:), and we do have Shadow Copies enabled for the volume (which are completing successfully). The System State Backup is now failing with the following listed in the backup logs: Volume shadow copy creation: Attempt 1. "Event Log Writer" has reported an error 0x800423f4. This is part of System State. The backup cannot continue. Error returned while creating the volume shadow copy:800423f4 Aborting Backup. The operation did not successfully complete. When doing a vssadmin list writers, we sometimes get the following reported for the Event Log Writer (other times it says that it is in the state of "[1] Stable" with "No error"): Writer name: 'Event Log Writer' Writer Id: {eee8c692-67ed-4250-8d86-390603070d00} Writer Instance Id: {c7194e96-868a-49e5-ba99-89b61977753c} State: [8] Failed Last error: Retryable error We have tried disabling the event log service via the registry, rebooting, deleting the event log files from the drive, then re-enabling the service via the registry and rebooting, but this didn't seem to solve the issue. We also get an error message when in the event viewer when trying to open the log for the "File Replication Service" of "Unable to complete the operation on 'File Replication Service'. The security descriptor structure is invalid." I have searched the error via Google and tried a number of different things, but nothing has seemed to help. Any suggestions on what we might try to get the Event Log Writer to behave would be greatly appreciated!

    Read the article

  • Cisco adaptive security appliance is dropping packets where SYN flag is not set

    - by Brett Ryan
    We have an apache instance sitting inside our DMZ which is configured to proxy requests to an internal NATed tomcat instance inside our network. It works fine, but then all of a sudden requests from apache to the tomcat instance stop getting through with the following in the apache logs: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header Investigating into the Cisco log viewer reveals the following: Error Message %ASA-6-106015: Deny TCP (no connection) from IP_address/port to IP_address/port flags tcp_flags on interface interface_name. Explanation The adaptive security appliance discarded a TCP packet that has no associated connection in the adaptive security appliance connection table. The adaptive security appliance looks for a SYN flag in the packet, which indicates a request to establish a new connection. If the SYN flag is not set, and there is not an existing connection, the adaptive security appliance discards the packet. Recommended Action None required unless the adaptive security appliance receives a large volume of these invalid TCP packets. If this is the case, trace the packets to the source and determine the reason these packets were sent. All are machines are virtualised using VMware, and by default machines have been using the Intel E1000 emulated NIC. Our network administrator has changed this to a VMXNET3 driver in an attempt to correct the problem, we just have to wait and see if the problem persists as it's an intermittent problem. Is there something else that could be causing this problem? This isn't the first service where we have had similar issues. Our apache host is running Ubuntu 11.10 with a kernel version of 3.0.0-17-server. We have also had this issue on RHEL5 (5.8) running kernel 2.6.18-308.16.1.el5, this machine also has the E1000 NIC. NOTE: I am not a network administrator and am a software architect and analyst programmer responsible for these systems.

    Read the article

  • How to use Salt Stack with minions all behind NAT (not publicly accessible, default salt ports not open)?

    - by MountainX
    Can Salt Stack minions communicate with the salt master from behind NAT/Firewalls, etc., using standard ports that would be open be default in all consumer NAT routers (and without the minions having a public DNS record or static IP)? I'm working my way through my first salt tutorial, and this is where I'm stuck. I am able to configure iptables on the Ubuntu salt-master. But I have no control over the routers/NAT that the minions will sit behind. So far I tried these settings: /etc/salt/master: publish_port: 465 ret_port: 443 /etc/salt/minion: master_port: 465 That did not work. Background: I have a custom developed application presently running on about 40 Kubuntu laptops (& more planned). Every few months I have to update the application. (Often this just amounts to replacing a .jar file, which requires root permissions.) I also have to run Ubuntu updates and a few other minor things. I've been doing it manually, one by one, using Team Viewer to log into each client. I would like to dramatically improve this process. The two options I'm aware of are either: use reverse ssh tunnels and bash scripts. I tested this and it works. But I don't get any of the reporting, etc., I would get with Salt Stack. use Salt Stack (or similar) management tool. But I need a really simple tool. I can't invest any time in a big learning curve. I looked at Puppet and a bunch of related tools. The only one I found that looked simple enough for me (so far) was Salt Stack. But I'm stuck now because my minion can't reach the salt-master, as stated above. I appreciate suggestions.

    Read the article

  • "No more threads can be created in the system" in Network and Sharing Center

    - by Zell Faze
    A while back I noticed on one of our laboratory computers (Windows 7, very little extra software installed) that the network connection icon in the system tray would claim that it had no network connection, even though it did. This issue would go away after the computer was rebooted, but would surface again the next time I looked at the computer (a few days later). Upon opening the Network and Sharing Center I am shown an actual error message, but not one that seems to give me a lot of information about what the problem is. In the place of the usual information about network adapters and whether you are connected to the Internet it simply says: "No more threads can be created in the system." The Event Viewer shows hundreds of events from different services also with the same message. "Volume Shadow Copy Service error: Unexpected error calling routine CoCreateInstance. hr = 0x800700a4, No more threads can be created in the system."; "The WinHTTP Web Proxy Auto-Discovery Service service failed to start due to the following error: A thread could not be created for the service."; "The IP Helper service terminated with the following error: No more threads can be created in the system." As far as I can tell, this message seems to mean that there is some sort of resource leak in Windows where something is creating a large number of threads and those threads are not being killed off? I've tried restarting WMI and several services related to networking, without avail. Can anyone provide more information on what "No more threads can be created in the system" might mean and what I might be able to do to fix the issue? Currently the only solution appears to be restarting.

    Read the article

  • Metro apps crash on startup, driver or permissions issue?

    - by Vee
    After installing Win8 x64 RC, Metro apps worked correctly, but desktop OpenGL apps were slow and unresponsive. I installed the latest Win8 nVidia drivers, and the OpenGL apps started working correctly. At the same time, because of annoying permission messages, I changed the C:\ drive and all its files ownerships to my user, and gave it full permission. I restarted my pc after installing the drivers, and now Metro apps only show the splash screen, then crash. I tried installing other versions of the nVidia drivers, with the same result. My GPU is a GeForce GTX275. Is this a known problem with nVidia drivers? Or maybe changing the ownership of C:\ is the real problem? Thank you. More information (after looking in the event viewer) I've managed to find the problem and the error in the Event Viewer. I still cannot solve it. Here's the information I found by opening the Mail app and letting it crash: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 15.54.17 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.Launch contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T13:54:17.472416600Z" /> <EventRecordID>6524</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6756" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.Launch</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> Found other stuff, this is another error that appears when opening a Metro app: Log Name: Application Source: ESENT Date: 07/06/2012 16.01.00 Event ID: 490 Task Category: General Level: Error Keywords: Classic User: N/A Computer: vee-pc Description: svchost (1376) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRU.log" for read / write access failed with system error 5 (0x00000005): "Access is denied. ". The open file operation will fail with error -1032 (0xfffffbf8). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="ESENT" /> <EventID Qualifiers="0">490</EventID> <Level>2</Level> <Task>1</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:01:00.000000000Z" /> <EventRecordID>11854</EventRecordID> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security /> </System> <EventData> <Data>svchost</Data> <Data>1376</Data> <Data>SRUJet: </Data> <Data>C:\Windows\system32\SRU\SRU.log</Data> <Data>-1032 (0xfffffbf8)</Data> <Data>5 (0x00000005)</Data> <Data>Access is denied. </Data> </EventData> </Event> After changing permissions again (adding Everyone and Creator Owner to System32), the "access denied to sru.log" error disappears, but this one appears in its place: Log Name: Application Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.16.34 Event ID: 2486 Task Category: (2414) Level: Error Keywords: (64),Process Lifetime Manager User: VEE-PC\Vittorio Computer: vee-pc Description: App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail did not launch within its allotted time. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>2486</EventID> <Version>0</Version> <Level>2</Level> <Task>2414</Task> <Opcode>0</Opcode> <Keywords>0x2000000000000042</Keywords> <TimeCreated SystemTime="2012-06-07T14:16:34.616499600Z" /> <EventRecordID>11916</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6996" /> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="ApplicationId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> </EventData> </Event> Now I'm stuck. It tells me "Activation of app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional information." but I can't find the Microsoft-Windows-TWinUI/Operational log. I'm starting a bounty. I found the TWinUI/Operational log. It only tells me: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.28.57 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.BackgroundTasks contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:28:57.238140800Z" /> <EventRecordID>6536</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="2624" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.BackgroundTasks</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> I need to go deeper. I found a forum thread that told me to look for "DCOM" errors. I found this one related to the app crash "The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout." Log Name: System Source: Microsoft-Windows-DistributedCOM Date: 07/06/2012 16.46.45 Event ID: 10010 Task Category: None Level: Error Keywords: Classic User: VEE-PC\Vittorio Computer: vee-pc Description: The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" /> <EventID Qualifiers="0">10010</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:46:45.586943800Z" /> <EventRecordID>2763</EventRecordID> <Correlation /> <Execution ProcessID="804" ThreadID="2364" /> <Channel>System</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="param1">Microsoft.WindowsLive.Mail.wwa</Data> </EventData> </Event>

    Read the article

  • Windows Audio Issue

    - by Nikki
    This one is driving me nuts. Hoping someone can shed some light. I'm running windows 7 using onboard audio. It's been fine for over 2 years but lately there's a problem every time I play audio. I hear a small soft burst of static and the volume turns itself down from 50% to 23%. Once at 23%, it plays fine. No related events logged in viewer. No reported problems with the device. Different headphones, same problem. I played around with audio settings for hours but the problem persists. EDIT: ok more info: Motherboard: ECS G31T-M LGA775 System info displays this: Name High Definition Audio Device Manufacturer Microsoft Status OK PNP Device ID HDAUDIO\FUNC_01&VEN_1106&DEV_E721&SUBSYS_10192683&REV_1001\4&3D4E739&0&0001 Driver c:\windows\system32\drivers\hdaudio.sys (6.1.7600.16385, 297.00 KB (304,128 bytes), 14/07/2009 9:51 AM) I'll keep adding info as I find it. The question I want resolved is; Is it faulty hardware? If so, I can buy a sound card. I can't imagine software is responsible since I haven't installed anything new for weeks. Virus scans are clear as well. The static burst is irritating to say the least. Tried 2 different headphones and separate speakers. Same problem. I know it's not an easy problem but I was hoping someone had encountered the same thing.

    Read the article

  • Problem with MS DTC on SQL2008 win server 2k8 with linked server from sql2000 win server 2k

    - by user31648
    Hi, We have migrated our db from sql2000 win server 2k to sql2008 win server 2k8. We have linked server from sql2000 win server 2k. By our opinion the problem is with DTC and we have made a lot of setting that we found as solution for our problem, but still the problem exist. There is no any error or worning or information niether in the sql log nor in win event viewer. The application is hanging out and at the end the time out exception is shown. What we have done till now: Enable Network DTC Access with inbound and outbound with No Authentication Required on win 2k8 We have opened RPC dynamic port allocation through registry on 2k and 2k8 We have entered subkey TurnOffRpcSecurity in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC and made it enable on 2k and 2k8 We have added exception for DTC in firewall for all entities What we have notice that when we restart SQL service and make the first try for our transaction the following is shown: "Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required." and after it: "Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required." Does someone have any idea what else can be done in order to solve the problem? Thanks in advance. Regards, Snezana

    Read the article

  • Exchange 2010: Replication Service Still Trying to Replicate Deleted Mailbox Store

    - by ThaKidd
    In advance, thank you for your opinions! I just migrated from Server/Exchange 2003 to Server 2008 SR2 running Exchange 2010. I had an extra mailbox that appeared with some system mailboxes in it. I used the EMS to move those mailboxes over and then deleted the store out of the EMC. Since then every so often I get an Error in Event Viewer. Source: MSExchangeRepl ID: 4098 Error: The Microsoft Exchange Replication service couldn't find a valid configuration for database '5f012f40-3bad-4003-a373-dbc0ffb6736f' on server 'EXCHSERVER'. Error: (nothing after this) I can confirm that the above GUID is the mailbox store of that I deleted. No other Exchange errors occur. How can I tell Exchange Replication to ignore this store? Setup, one Exchange server 2003 transitioned over to 2010. No other Exchange servers. Is there a way to fix this? Do I need to change a setting to stop replication? I plan to add a second Exchange server in the next few days so stopping replication would be a bad thing. Thanks again in advance. Jason

    Read the article

  • best practice to removing DC from Site that no longer connects via vpn in another city

    - by dasko
    hi i am looking for a recap of what i have done already to see if i missed anything. i had two cities connected by wan using a ipsec persistent tunnel between gateways. i had one DC (DOMAIN CONTROLLER) in each city that was a global catalog server (GC) they were set up to replicate and i had them configured under Sites and Servers with their own subnet etc... about 6 months ago the one city was removed and i was not able to gracefully remove, through dcpromo, the server that was there. it is no longer used and cannot be brought back. the company went from two sites down to single site. Problem is i had a whole bunch of kcc errors and replication bugs in the event viewer. i wanted to clean up my active directory and decided to use the ntdsutil metadata cleanup commands. i removed the server from the specifed site based on a procedure from petri website. I then removed the instances of the old DC and site from Sites and Servers. Then i went and cleaned up the DNS by removing Host A records, NS server name from both the local DNS forward lookup zone and the _msdcs i also removed the reverse lookup zone for the subnet that no longer exists. is there anything i missed? thanks in advance for any help. gd

    Read the article

  • HTTP Error 503 - Service is unavailable (how fix?)

    - by SilverLight
    i have a web site for download mobile files and there many users in my web site. sometimes i have the error below : HTTP Error 503 - Service is unavailable 1-so why this error happens and what is that mean? 2-as i know appache free up itself when it's oveloaded, but what about iis? how can i put some limitations in my server (i have remote access to my server) for prevent this error happening? a.is limitation of dowload's speed efficient for prevent that error's occur? how can i do that? is squid useful for this job or i can do that with another iis extension. b.is limitation of download's Bandwidth efficient for prevent that error's occur? how can i do that (with iis or another extension)? in right side of iis - configure area - i found some limits. what do those limits mean and can i use them for keep my server alive all the time? EDIT: after viewing event viewer of windows - custom views - server rols - web server (iis) i figure out there is no error in that area. but many warnings and information. the latest warnings and information are like below : warning A worker process '2408' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '6764'. warning A worker process '3232' serving application pool 'ASP.NET 4.0 (Integrated)' failed to stop a listener channel for protocol 'http' in the allotted time. The data field contains the error number. warning A process serving application pool 'ASP.NET 4.0 (Integrated)' exceeded time limits during shut down. The process id was '3928'. thanks in advance best regards

    Read the article

  • get-eventlog issue

    - by Jim B
    I wanted to get a quick report of some log entries I saw on a server, so I ran: Get-Eventlog -logname system -newest 10 -computer fs1 | fl I got events back however the descriptions were all wrong. Here's an example: Index : 1260055 EntryType : Warning InstanceId : 2186936367 Message : The description for Event ID '-2108030929' in Source 'W32Time' cannot be found. The local compute r may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'time. windows.com,0x1' Category : (0) CategoryNumber : 0 ReplacementStrings : {time.windows.com,0x1} Source : W32Time TimeGenerated : 1/25/2010 10:43:31 AM TimeWritten : 1/25/2010 10:43:31 AM UserName : Note that if I pull the event ID property it's correct (in this case 38) Is this is known issue or is something wrong. The messages resolve fine via event viewer locally and remotely Here is the powershell version info: Name : ConsoleHost Version : 2.0 InstanceId : bc58fcf8-bba3-4ca8-8972-17dbd5d9ff08 UI : System.Management.Automation.Internal.Host.InternalHostUserInterface CurrentCulture : en-US CurrentUICulture : en-US PrivateData : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy IsRunspacePushed : False Runspace : System.Management.Automation.Runspaces.LocalRunspace Here is the revised version info: Name Value ---- ----- CLRVersion 2.0.50727.3603 BuildVersion 6.0.6002.18111 PSVersion 2.0 WSManStackVersion 2.0 PSCompatibleVersions {1.0, 2.0} SerializationVersion 1.1.0.1 PSRemotingProtocolVersion 2.1

    Read the article

  • HTTP Error 503. The service is unavailable

    - by user1671639
    I'm struggling to setup the environment in IIS8, I searched a lot but couldn't find a right solution. I checked the error logs, but no idea. C:\Windows\System32\LogFiles\HTTPERR 2013-10-09 09:28:39 192.168.43.205 60172 192.168.43.205 80 HTTP/1.1 GET / 503 2 AppOffline qa.hti.local 2013-10-09 09:28:39 192.168.43.205 60192 192.168.43.205 80 HTTP/1.1 GET /favicon.ico 503 2 AppOffline qa.hti.local Then in Event Viewer: WARNINGS: A listener channel for protocol 'http' in worker process '11188' serving application pool 'qa.hti.local' reported a listener channel failure. The data field contains the error number. A listener channel for protocol 'http' in worker process '7492' serving application pool 'qa.hti.local' reported a listener channel failure. The data field contains the error number. A listener channel for protocol 'http' in worker process '9088' serving application pool 'qa.hti.local' reported a listener channel failure. The data field contains the error number. A listener channel for protocol 'http' in worker process '9964' serving application pool 'qa.hti.local' reported a listener channel failure. The data field contains the error number. A listener channel for protocol 'http' in worker process '7716' serving application pool 'qa.hti.local' reported a listener channel failure. The data field contains the error number. I don't understand what the warning means. ERROR: Application pool 'qa.hti.local' is being automatically disabled due to a series of failures in the process(es) serving that application pool. Note: I learned that consecutive 5 failures leads to APP Pool crash, and this can increased. I also tried increasing this but no success. OS: Windows server 2012 IIS Version: 8 Please share your thoughts.

    Read the article

  • Windows 7: Windows Firewall: Logging/Notifying on Outgoing Request Attempts

    - by Maxim Z.
    I'm trying to configure Windows Firewall with Advanced Security to log and tell me when programs are trying to make outbound requests. I previously tried installing ZoneAlarm, which worked wonders for me with this in XP, but now, I'm unable to install ZA on Win7. My question is, is it possible to somehow monitor a log or get notifications when a program tries to do that if I set all outbound connections to auto-block, so that I can then create a specific rule for the program and block it.? Thanks! UPDATE: I've enabled all the logging options available through the Properties windows of the Windows Firewall with Advanced Security Console, but I am only seeing logs in the %systemroot%\system32\LogFiles\Firewall\pfirewall.log file, not in the Event Viewer, as the first answer suggested. However, the logs that I can see only tell me the request's or response's destination IP and whether the connection was allowed or blocked, but it doesn't tell me what executable it comes from. I want to find out the file path of the executable that each blocked request comes from. So far, I haven't been able to.

    Read the article

  • WAMP server not starting and a mystery service is using port 80

    - by David Gard
    I'm using WAMP on Windows 7 and tonight I'm unable to start it (it's been working fine for about 3 years previously). I first checked the logs, but nothing in there. So I checked the Windows Event Viewer (eventvwr), where I saw 2x errors for each attempted start - The Apache service named reported the following error: (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80. The Apache service named reported the following error: no listening sockets available, shutting down. After this, I opened the command prompt and ran netstat -a, and to my surprise there were 3 entries for port 80 - Prot   Local Address  Foreign Address   State TCP   127.0.0.1:80       MyPCName:53831   TIME_WAIT TCP   127.0.0.1:80       MyPCName:57834   TIME_WAIT TCP   127.0.0.1:80       MyPCName:57839   TIME_WAIT From here, I'm kind of lost. As far as I can tell, something is utalising port 80, but I don't know what or why. If anyone is able to suggest what I might do next I'd be most greatful. Thanks.

    Read the article

  • Send mail on event log error trigger safe check frequency

    - by Zeb Rawnsley
    I want to use powershell to alert me when an error occurs in the event viewer on my new Win2k12 Standard Server, I was thinking I could have the script execute every 10mins but don't want to put any strain on the server just for event log checking, here is the powershell script I want to use: $SystemErrors = Get-EventLog System | Where-Object { $_.EntryType -eq "Error" } If ($SystemErrors.Length -gt 0) { Send-MailMessage -To "[email protected]" -From $env:COMPUTERNAME + @company.co.nz" -Subject $env:COMPUTERNAME + " System Errors" -SmtpServer "smtp.company.co.nz" -Priority High } What is a safe frequency I can run this script at without hurting my server? Hardware: Intel Xeon E5410 @ 2.33GHz x2 32GB RAM 3x 7200RPM S-ATA 1TB (2x RAID1) Edit: With the help of Mathias R. Jessen's answer, I ended up attaching an event to the application & system log with the following script: Param( [string]$LogName ) $ComputerName = $env:COMPUTERNAME; $To = "[email protected]" $From = $ComputerName + "@company.co.nz"; $Subject = $ComputerName + " " + $LogName + " Error"; $SmtpServer = "smtp.company.co.nz"; $AppErrorEvent = Get-EventLog $LogName -Newest 1 | Where-Object { $_.EntryType -eq "Error" }; If ($AppErrorEvent.Length -eq 1) { $AppErrorEventString = $AppErrorEvent | Format-List | Out-String; Send-MailMessage -To $To -From $From -Subject $Subject -Body $AppErrorEventString -SmtpServer $SmtpServer -Priority High; };

    Read the article

  • System Idle Process network traffic?-Updated

    - by Moab
    I was using NetBalancer and noticed network traffic on an unidentified service, but when I highlight it and then go to the lower center pane and click the parent process it says it is the System Idle process, it is showing incoming and outgoing traffic in the upper pane, anyone know why this Windows System Idle Process is talking on the network? Windows 7 HP 64bit . . . Edit, after blocking the traffic for that unidentified Service I checked my event viewer (Windows LogsSystem) and found 3 new events that were never recorded before and matched the time I blocked the traffic. So is this part of the Windows local DNS cache? Event ID 1014 DNS Client Events Name resolution for the name dns.msftncsi.com timed out after none of the configured DNS servers responded. dns.msftncsi.com Name resolution for the name wpad.home timed out after none of the configured DNS servers responded. wpad Name resolution for the name mscrl.microsoft.com timed out after none of the configured DNS servers responded. mscrl.microsoft.com . Then My Web Browser refused to work, I re-enabled the traffic and all returned to normal. .

    Read the article

  • Intermittent unavailability of an instance in a failover cluster while a standby node is offline in

    - by Emil Fridriksson
    Hi everyone. I've got a small failover cluster that I run for the websites my company has. During a RAM upgrade of the standby server, our websites started to show errors about not being able to access the database server. I verified that the instance was indeed up and the server accessable via remote desktop. I also tried a SQL connection to it and it worked, but that might have been after it became available again. This happened on and off until we were able to roll back the hardware changes that were in progress on the standby server and we were able to bring it back up. There was nothing of interest in the SQL Server log, but there is a continous log for the whole duration of the problem, so there was no restart of the SQL Server service. The event viewer is of more interest, since it shows events relating to the heartbeat network card, but I don't know how that would affect the availability of the server, since the standby node is offline. I'd appreciate any help you can provide, it's not very redundant if the setup depends on the standby server being up. :) Here are the event logs from the time of the problem, I include all of them since I can't seem to see what could possibly be the cause of the problem. Event log: http://hlekkir.com:800/htmltable.htm

    Read the article

  • Follow cursor location from kile to evince.

    - by D Connors
    I know the title is probably not very clear, so I'll try to be as clear as possible here. I'm running xubuntu on my netbook, and I'm using kile for my latex editing. Since kile is native to kde, I had to manually set it to open pdfs and dvis on evince instead of okular. Now, last time I played around with LaTeX I was using TeXnic center on windows, and it had a very neat feature. Whenever I hit "QuickBuild", not only would it open the output .dvi file, but it would also show me exactly the piece of text I was editing. That is, if I were editing line 13 of the 7th of my document, when I compiled it, the dvi viewer would automatically take me to line 13 on the 7th page of the document, so I wouldn't have to scroll all the way down to it every time I compiled the .tex file. I'm guessing this is a pretty standard feature, and kile probably supports it. But since I don't know what it's called, I'm trying to be clear as to what I'm talking about. Problem is, this feature is not working for me right now, and I'm guessing it's either because evince does not support it, or because I have to manually configure it. Which one is it? And how do I manually configure it, if that's the case?

    Read the article

  • Windows Server 2008 R2, weird intermittent outgoing connection issues, & Hyper-V Virtual Network

    - by brizz
    My provider says that they run an 'unfiltered' network, so it's not a network issue. Not entirely convinced...but they aren't being very helpful. Basically two days ago started having issues with DNS completely stop working for anywhere between 2-20minutes. This happens roughly every 1-2 hours at least once. I later then found that I am unable to ping ANY external IP address when this is going on. So it's not a DNS issue. Whats even more odd is when this is going on, I STAY connected via RDP, and I can access webpages, etc that are on the server when I access from my home computer. Have tried disabling the firewall--no fix. Have checked Event viewer, the only thing that is there is a warning that DNS has stopped working. I have made no changes/updates to the server. The only thing I have done is add an IP address (don't think it has anything to do with the problem, but wanted to mention everything). Any help/insight/suggestions on how to go about debugging would be much appreciated! update: I am also running Hyper-V, and a virtual network. I just tried pinging (when I have issues), from a Hyper-V machine--and it works, when the main server doesn't.

    Read the article

  • Windows 7 Not Recognizing Camera Nor iPhone as Camera

    - by taudep
    I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

    Read the article

  • SharePoint Records Center Submitted E-mail Records not picked up

    - by Kenneth Verburg
    We have set up a new SharePoint 2007 site with a Records Repository. We're using Exchange 2007 Managed Folders to route e-mails to this repository based on the 'label' attached to the e-mail as set in the Exchange 2007 journaling options. E-mails added to a Managed Folder get sent to SharePoint, they end up in the "Submitted E-mail Records" list of the Records Repository. That's according to plan, but the e-mails are not routed to the respective document library as defined by the label. Instead an error appears in the event viewer for every e-mail listed in the Submitted E-mail Records list, on every interval of the records repository schedule (set to every two minutes for testing purposes): Value cannot be null, parameter name: g. Sending a document from the SharePoint site iself to the Records Repository via the Send To... link works fine, but e-mails get stuck in the list... We have set Document Libraries in the Respository with and without content types (with matching names with the Label and the Record Routing rule set). Any ideas what could be wrong? This is in the event log: Every two minutes the following error appears in the Application Log: Source: Office SharePoint Server Category: Records Center Type: Error Event ID: 4975 User: N/A Computer: SPS2007 Description: Value cannot be null. Parameter name: g For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >