Search Results

Search found 14926 results on 598 pages for 'ace library'.

Page 552/598 | < Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >

• Review: A Quick Look at Reflector

  - by James Michael Hare

  I, like many, was disappointed when I heard that Reflector 7 was not free, and perhaps that’s why I waited so long to try it and just kept using my version 6 (which continues to be free).  But though I resisted for so long, I longed for the better features that were being developed, and began to wonder if I should upgrade.  Thus, I began to look into the features being offered in Reflector 7.5 to see what was new. Multiple Editions Reflector 7.5 comes in three flavors, each building on the features of the previous version: Standard – Contains just the Standalone application ($70) VS – Same as Standard but adds Reflector Object Browser for Visual Studio ($130) VSPro – Same as VS but adds ability to set breakpoints and step into decompiled code ($190) So let’s examine each of these features. The Standalone Application (Standard, VS, VSPro editions) Popping open Reflector 7.5 and looking at the GUI, we see much of the same familiar features, with a few new ones as well: Most notably, the disassembler window now has a tabbed window with navigation buttons.  This makes it much easier to back out of a deep-dive into many layers of decompiled code back to a previous point. Also, there is now an analyzer which can be used to determine dependencies for a given method, property, type, etc. For example, if we select System.Net.Sockets.TcpClient and hit the Analyze button, we’d see a window with the following nodes we could expand: This gives us the ability to see what a given type uses, what uses it, who exposes it, and who instantiates it. Now obviously, for low-level types (like DateTime) this list would be enormous, but this can give a lot of information on how a given type is connected to the larger code ecosystem. One of the other things I like about using Reflector 7.5 is that it does a much better job of displaying iterator blocks than Reflector 6 did. For example, if you were to take a look at the Enumerable.Cast() extension method in System.Linq, and dive into the CastIterator in Reflector 6, you’d see this: But now, in Reflector 7.5, we see the iterator logic much more clearly: This is a big improvement in the quality of their code disassembler and for me was one of the main reasons I decided to take the plunge and get version 7.5. The Reflector Object Browser (VS, VSPro editions) If you have the .NET Reflector VS or VSPro editions, you’ll find you have in Visual Studio a Reflector Object Browser window available where you can select and decompile any assembly right in Visual Studio. For example, if you want to take a peek at how System.Collections.Generic.List<T> works, you can either select List<T> in the Reflector Object Browser, or even simpler just select a usage of it in your code and CTRL + Click to dive in. – And it takes you right to a source window with the decompiled source: Setting Breakpoints and Stepping Into Decompiled Code (VSPro) If you have the VSPro edition, in addition to all the things said above, you also get the additional ability to set breakpoints in this decompiled code and step through it as if it were your own code: This can be a handy feature when you need to see why your code’s use of a BCL or other third-party library isn’t working as you expect. Summary Yes, Reflector is no longer free, and yes, that’s a bit of a bummer. But it always was and still is a very fine tool. If you still have Reflector 6, you aren’t forced to upgrade any longer, but getting the nicer disassembler (especially for iterator blocks) and the handy VS integration is worth at least considering upgrading for.  So I leave it up to you, these are some of the features of Reflector 7.5, what’s your thoughts? Technorati Tags: .NET,Reflector

  Read the article

• Bind a Wijmo Grid to Salesforce.com Through the Salesforce OData Connector

  - by dataintegration

  This article will explain how to connect to any RSSBus OData Connector with Wijmo's data grid using JSONP. While the example will use the Salesforce Connector, the same process can be followed for any of the RSSBus OData Connectors. Step 1: Download and install both the Salesforce Connector from RSSBus and the Wijmo javascript library. Step 2: Next you will want to configure the Salesforce Connector to connect with your Salesforce account. If you browse to the Help tab in the Salesforce Connector application, there is a link to the Getting Started Guide which will walk you through setting up the Salesforce Connector. Step 3: Once you have successfully configured the Salesforce Connector application, you will want to open a Wijmo sample grid file to edit. This example will use the overview.html grid found in the Samples folder. Step 4: First, we will wrap the jQuery document ready function in a callback function for the JSONP service. In this example, we will wrap this in function called fnCallback which will take a single object args. <script id="scriptInit" type="text/javascript"> function fnCallback(args) { $(document).ready(function () { $("#demo").wijgrid({ ... }); }); }; </script> Step 5: Next, we need to format the columns object in a format that Wijmo's data grid expects. This is done by adding the headerText: element for each column. <script id="scriptInit" type="text/javascript"> function fnCallback(args) { var columns = []; for (var i = 0; i < args.columnnames.length; i++){ var col = { headerText: args.columnnames[i]}; columns.push(col); } $(document).ready(function () { $("#demo").wijgrid({ ... }); }); }; </script> Step 6: Now the wijgrid parameters are ready to be set. In this example, we will set the data input parameter to the args.data object and the columns input parameter to our newly created columns object. The resulting javascript function should look like this: <script id="scriptInit" type="text/javascript"> function fnCallback(args) { var columns = []; for (var i = 0; i < args.columnnames.length; i++){ var col = { headerText: args.columnnames[i]}; columns.push(col); } $(document).ready(function () { $("#demo").wijgrid({ allowSorting: true, allowPaging: true, pageSize: 10, data: args.data, columns: columns }); }); }; </script> Step 7: Finally, we need to add the JSONP reference to our Salesforce Connector's data table. You can find this by clicking on the Settings tab of the Salesforce Connector. Once you have found the JSONP URL, you will need to supply a valid table name that you want to connect with Wijmo. In this example, we will connect to the Lead table. You will also need to add authentication options in this step. In the example we will append the authtoken of the user who has access to the Salesforce Connector using the @authtoken query string parameter. IMPORTANT: This is not secure and will expose the authtoken of the user whose authtoken you supply in this step. There are other ways to secure the user's authtoken, but this example uses a query string parameter for simplicity. <script src="http://localhost:8181/sfconnector/data/conn/Lead.rsd?@jsonp=fnCallback&sql:query=SELECT%20*%20FROM%20Lead&@authtoken=<myAuthToken>" type="text/javascript"></script> Step 8: Now, we are done. If you point your browser to the URL of the sample, you should see your Salesforce.com leads in a Wijmo data grid.

  Read the article

• Windows Azure Use Case: New Development

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

  Read the article

• Detecting Process Shutdown/Startup Events through ActivationAgents

  - by Ramkumar Menon

  @10g - This post is motivated by one of my close friends and colleague - who wanted to proactively know when a BPEL process shuts down/re-activates. This typically happens when you have a BPEL Process that has an inbound polling adapter, when the adapter loses connectivity to the source system. Or whatever causes it. One valuable suggestion came in from one of my colleagues - he suggested I write my own ActivationAgent to do the job. Well, it really worked. Here is a sample ActivationAgent that you can use. There are few methods you need to override from BaseActivationAgent, and you are on your way to receiving notifications/what not, whenever the shutdown/startup events occur. In the example below, I am retrieving the emailAddress property [that is specified in your bpel.xml activationAgent section] and use that to send out an email notification on the activation agent initialization. You could choose to do different things. But bottomline is that you can use the below-mentioned API to access the very same properties that you specify in the bpel.xml. package com.adapter.custom.activation; import com.collaxa.cube.activation.BaseActivationAgent; import com.collaxa.cube.engine.ICubeContext; import com.oracle.bpel.client.BPELProcessId; import java.util.Date; import java.util.Properties; public class LifecycleManagerActivationAgent extends BaseActivationAgent { public BPELProcessId getBPELProcessId() { return super.getBPELProcessId(); } private void handleInit() throws Exception { //Write initialization code here System.err.println("Entered initialization code...."); //e.g. String emailAddress = getActivationAgentDescriptor().getPropertyValue(emailAddress); //send an email sendEmail(emailAddress); } private void handleLoad() throws Exception { //Write load code here System.err.println("Entered load code...."); } private void handleUnload() throws Exception { //Write unload code here System.err.println("Entered unload code...."); } private void handleUninit() throws Exception { //Write uninitialization code here System.err.println("Entered uninitialization code...."); } public void init(ICubeContext icubecontext) throws Exception { super.init(icubecontext); System.err.println("Initializing LifecycleManager Activation Agent ....."); handleInit(); } public void unload(ICubeContext icubecontext) throws Exception { super.unload(icubecontext); System.err.println("Unloading LifecycleManager Activation Agent ....."); handleUnload(); } public void uninit(ICubeContext icubecontext) throws Exception{ super.uninit(icubecontext); System.err.println("Uninitializing LifecycleManager Activation Agent ....."); handleUninit(); } public String getName() { return "Lifecyclemanageractivationagent"; } public void onStateChanged(int i, ICubeContext iCubeContext) { } public void onLifeCycleChanged(int i, ICubeContext iCubeContext) { } public void onUndeployed(ICubeContext iCubeContext) { } public void onServerShutdown() { } } Once you compile this code, generate a jar file and ensure you add it to the server startup classpath. The library is ready for use after the server restarts. To use this activationAgent, add an additional activationAgent entry in the bpel.xml for the BPEL Process that you wish to monitor. After you deploy the process, the ActivationAgent object will be called back whenever the events mentioned in the overridden methods are raised. [init(), load(), unload(), uninit()]. Subsequently, your custom code is executed. Sample bpel.xml illustrating activationAgent definition and property definition. <?xml version="1.0" encoding="UTF-8"? <BPELSuitcase timestamp="1291943469921" revision="1.0" <BPELProcess wsdlPort="{http://xmlns.oracle.com/BPELTest}BPELTestPort" src="BPELTest.bpel" wsdlService="{http://xmlns.oracle.com/BPELTest}BPELTest" id="BPELTest" <partnerLinkBindings <partnerLinkBinding name="client" <property name="wsdlLocation"BPELTest.wsdl</property </partnerLinkBinding <partnerLinkBinding name="test" <property name="wsdlLocation"test.wsdl</property </partnerLinkBinding </partnerLinkBindings <activationAgents <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="test" <property name="portType"Read_ptt</property </activationAgent <activationAgent className="com.oracle.bpel.activation.LifecycleManagerActivationAgent" partnerLink="test" <property name="emailAddress"[email protected]</property </activationAgent </activationAgents </BPELProcess </BPELSuitcase em

  Read the article

• Create Panoramic Photos with Windows Live Photo Gallery

  - by Matthew Guay

  Have you ever wanted to capture the view from a mountain or the full size of a building?  Here’s how you can stitch multiple shots together into the perfect panoramic picture for free with Windows Live Photo Gallery. Getting Started First, make sure you have Windows Live Photo Gallery installed (link below).  Live Photo Gallery is part of the Windows Live Essentials suite, you can select other programs to install along with it if you want. Make sure to uncheck setting your home page to MSN and setting your search provider as Bing if you don’t want them changed.   Now, make sure you have pictures that will work good for a panorama.  These need to be taken from the same spot, and the edges of the pictures need to overlap so the program can find where the pictures connect.  Here we have taken pictures inside a building with a cell phone camera. Make your Panorama Open Live Photo Gallery, and find the pictures you want to use in your panorama.  It will automatically index and display all of the photos in your Pictures folder or Library if you’re using Windows 7. If your pictures are saved elsewhere, add that folder to Photo Gallery.  Click File, Include a folder in the gallery, and select the correct folder at the prompt. Now select all of the pictures that you will use in your panorama.  You can easily do this by clicking the checkbox on each picture that appears when you hover over it.    Once all of the pictures are selected, click Make in the menu bar and select Create panoramic photo… Alternately, right-click on any of the pictures you’ve selected, and click Create panoramic photo… Live Photo Gallery will analyze your photos and compost them together to create a panorama.  The amount of time it takes will vary depending on the number of photos, size of the pictures, and computer speed. When it’s finished making the panorama, you’ll be prompted to enter a file name and save the picture. Your new panorama picture will open as soon as it’s saved.  Depending on your shots, the picture may have quite a bit of black space around the edges where each picture didn’t cover the exact same amount of area. To correct this, click Fix on the menu bar, and then select Crop Photo in the sidebar that opens. Select the center of the picture with the crop tool, and click Apply when you’ve got the selection you want. Live Photo Gallery automatically saves your picture changes, and you can revert back to the original picture if you wish. Now you’ve got a nice panoramic shot, trimmed and ready to print, share, and more. Conclusion Panoramic shots are great ways to capture your whole surroundings, whether it’s a sports stadium, mall, or a scenic mountain view.  They can also be a great way to capture more with low-resolution cameras. Link Download Windows Live Photo Gallery Similar Articles Productive Geek Tips Family Fun: Share Photos with Photo Gallery and Windows Live SpacesLearning Windows 7: Manage Photos with Live Photo GalleryEasily Re-Size Photos in Windows Vista or XPInstall Windows Live Essentials In Windows 7Convert Photos to Flash for Your Website TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• Build Your Own CE6 Kernel

  - by Kate Moss' Big Fan

  The Share Source Program in Windows CE provides many modules in %_WINCEROOT%\Private\ tree, and the kernel is one of them! Although it is not full source of kernel but it is good enough for tracing it, even tweak the kernel. Tracing the kernel and see how it works is lots of fun, but it is fascinated to modify and verify the change you made. So first comes first, where is the source of kernel? It's in your %_WINCEROOT%\private\winceos\COREOS\nk\ And next question will be "How do I build it?", Some of you may say just "build -c" there and it should be good. If you are the owner of kernel and got full source, that is definitely the right answer, but none of them are applied to our case though. So what should I do? Let's dig deeper into the coreos\nk folder, there are a couples of subfolder, CELOG, KDSTUB, KERNEL and etc. KERNEL\ is the main component of kernel.dll, in the other word, most of the modify to kernel is going to happen here. And the good thing is, you could "build -c" in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ with no error at all. But before doing that, remember to backup eveything you are going to modify, including the source and binaries; remember, this is not something belong to you, and if you didn't restore them back later, it could end up confuse the subsequence QFE updates! Here is the steps Backup the source code, I will suggest the whole %_WINCEROOT%\private\winceos\COREOS\nk\ Backup the binaries in common\oak\lib\, and again if you are not sure which files, backup the whole %_WINCEROOT%\common\oak\lib\ is the safest way. Do whatever modification you want in %_WINCEROOT%\private\winceos\COREOS\nk\kernel\ build -c in %_WINCEROOT%\private\winceos\COREOS\nk\kernel If everything went well so far, you should get a new nkmain.lib,nkmain.pdb, nkprmain.lib and nkprmain.pdb in %_WINCEROOT%\public\common\oak\lib\%_TGTCPU%\%WINCEDEBUG%\ Basically, you just rebuild your new kernel, the rest is to "blddemo clean -q" to have your new kernel SYSGEN'd and include in your OS Image. Or just "set WINCEREL=1" then "sysgen -p common nk nkprof" and "makeimg" if you can't wait another minutes for "blddemo clean -q" Tat sounds good, but some of you may not like the idea to alter any code in private folder, and not to mention how annoying to backup/restore files every time. Better idea? Yes, Microsoft provides a tool SYSGEN_CAPTURE (http://msdn.microsoft.com/en-us/library/ee504678.aspx for detail and usage) to creates Sources files for public drivers that you want to modify and build in your platform directory. In fact, not only public drivers, virtually anything in the %_WINCEROOT%\public\<project name>\cesysgen\makefile can be captured, and of course including kernel. So I am going to introduce a second way to build your own kernel by using SYSGEN_CAPTURE tool. Again the steps Create a folder in your BSP for building kernel, says %_TARGETPLATROOT%\SRC\Kernel. Use "SYSGEN_CAPTURE -p common nk" and then you will get a SOURCES.KERN, you could also "SYSGEN_CAPTURE -p common nkprof" to generate profiler enabled kernel. rename the SOURCE.KERN to SOURCES and copy one of the sample makefile into your kernel directory. For example the one in PRIVATE\WINCEOS\COREOS\NK\KERNEL\NKNORMAL. Copy the source files you want to modify from private\winceos\coreos\nk\kernel\ into your kernel directory. Modifying the SOURCES= macro to the source files you addes in step 4. For example, if you copied the vm.c, it is going to be SOURCES=vm.c Refer to the private\winceos\COREOS\nk\kernel\sources.inc and add macro defines and proper include path in your SOURCES file. "set WINCEREL=1", "build -c" in your kernel directory and "makeimg", voila! Here is an example for the MACROS you need to add in x86 Here are the macros for x86 CDEFINES=$(CDEFINES) -DIN_KERNEL -DWINCEMACRO -DKERN_CORE # Machine independent defines CDEFINES=$(CDEFINES) -DDBGSUPPORT _COREOSROOT=$(_WINCEROOT)\private\winceos\coreos INCLUDES=$(_COREOSROOT)\inc;$(_COREOSROOT)\nk\inc !IFDEF DP_SETTINGS CDEFINES=$(CDEFINES) -DDP_SETTINGS=$(DP_SETTINGS) !ENDIF ASM_SAFESEH=1 CDEFINES=$(CDEFINES) -Gs100000 -DENCODE_GS_COOKIE

  Read the article

• Using the RSSBus Salesforce Excel Add-In From Excel Macros (VBA)

  - by dataintegration

  The RSSBus Salesforce Excel Add-In makes it easy to retrieve and update data from Salesforce from within Microsoft Excel. In addition to the built-in wizards that make data manipulation possible without code, the full functionality of the RSSBus Excel Add-Ins is available programmatically with Excel Macros (VBA) and Excel Functions. This article shows how to write an Excel macro that can be used to perform bulk inserts into Salesforce. Although this article uses the Salesforce Excel Add-In as an example, the same process can be applied to any of the Excel Add-Ins available on our website. Step 1: Download and install the RSSBus Excel Add-In available on our website. Step 2: Open Excel and create place holder cells for the connection details that are needed from the macro. In this article, a spreadsheet will be created for batch inserts, and these cells will store the connection details, and will be used to report the job Id, the batch Id, and the batch status. Step 3: Switch to the Developer tab in Excel. Add a new button on the spreadsheet, and create a new macro associated with it. This macro will contain the code needed to insert a batch of rows into Salesforce. Step 4: Add a reference to the Excel Add-In by selecting Tools --> References --> RSSBus Excel Add-In. The macro functions of the Excel Add-In will be available once the reference has been added. The following code shows how to call a Stored Procedure. In this example, a job is created to insert Leads by calling the CreateJob stored procedure. CreateJob returns a jobId that can be used to upload a large number of Leads in one transaction. Note the use of cells B1, B2, B3, and B4 that were created in Step 2 to read the connection settings from the Excel SpreadSheet and to write out the status of the procedure. methodName = "CreateJob" module.SetProviderName ("Salesforce") nameArray = Array("ObjectName", "Action", "ConcurrencyMode") valueArray = Array("Lead", "insert", "Serial") user = Range("B1").value pass = Range("B2").value atoken = Range("B3").value If (Not user = "" And Not pass = "" And Not atoken = "") Then module.SetConnectionString ("User=" + user + ";Password=" + pass + ";Access Token=" + atoken + ";") If module.CallSP(methodName, nameArray, valueArray) Then Dim ColumnCount As Integer ColumnCount = module.GetColumnCount Dim idIndex As Integer For Count = 0 To ColumnCount - 1 Dim colName As String colName = module.GetColumnName(Count) If module.GetColumnName(Count) = "id" Then idIndex = Count End If Next While (Not module.EOF) Range("B4").value = module.GetValue(idIndex) module.MoveNext Wend Else MsgBox "The CreateJob query failed." End If Exit Sub Else MsgBox "Please specify the connection details." Exit Sub End If Error: MsgBox "ERROR: " & Err.Description Step 5: Add the code to your macro. If you use the code above, you can check the results at Salesforce.com. They can be seen at Administration Setup -> Monitoring -> Bulk Data Load Jobs. Download the attached sample file for a more complete demo. Distributing an Excel File With Macros An Excel file with macros is saved using the .xlms extension. The code for the macro remains in the Excel file, and you can distribute your Excel file to any machine where the RSSBus Salesforce Excel Add-In is already installed. Macro Sample File Please download the fully functional sample excel file that includes the code referenced here. You will also need the RSSBus Excel Add-In to make the connection. You can download a free trial here. Note: You may get an error message stating: "Can't find project or library." in Excel 2007, since this example is made using Excel 2010. To resolve this, navigate to Tools -> References and uncheck the "MISSING: RSSBus Excel Add-In", then scroll down and check the "RSSBus Excel Add-In" listed below it.

  Read the article

• New Training and Support Center Coming Soon!

  - by Ruth

  The CRM On Demand Training and Support Center is getting a face lift. In May 2010 we will unveil the new and improved layout, look and feel, and even some new content. Some of you told us loud and clear that you wanted an easier way to find our training courses and other important information. Well, here you are: Immediately you see the look and feel has changed and things have moved around a bit. You may ask, "How can I find the training catalog? Service requests? Downloads?" There are a few ways to find what you're looking for. You may use the search box to find training, quick guides, downloads, best practices, FAQs and more. You may also click the tabs or links in the blue bar, like Browse Training, to browse other documents and information. Here is a brief outline of the tabs and links that will help as you navigate this new tool: The Support tab provides alerts and notifications specific to your application environment. The Get Started tab is organized by role and contains links to resources aimed at helping you get the most out of your first 30 days with CRM On Demand. The Learn More tab outlines information in key topic areas, like administration, integration, and reports. Go to this tab to get the resources you need to move beyond the basics. The Release Information tab contains information specific to the current and upcoming releases of CRM On Demand. Access this tab to learn about and prepare for upgrades to your CRM On Demand application. The Best Practices tab contains a compilation of knowledge gained by experts that work with CRM On Demand day in and day out. Access this knowledge to benefit from their vast experience. The Communities tab offers connections to others in the CRM On Demand community through forums, communities, blogs, and more. The Browse training link opens the training catalog.Take a look at the instructor-led training, Webinars, quick guides, use cases, and tools available to you. The Browse Knowledge link takes you to our knowledge base where you can get answers to frequently asked questions. The Submit a Service Request link directs you to My Oracle Support where you can log a service request. The steps in that process have not changed. The Web Services Library provides simple APIs and a link to Oracle Sample Code where you can get samples that can help you build custom integrations. The Add-On Applications link allows access to our downloadable applications that allow you to extend the functionality of CRM On Demand. The Templates and Tools link provides access to resources that can help you design and build CRM On Demand to meet your company's specific needs. A lot has changed and I know it is a lot to take in. To help you out, we have a printable quick guide that you can use during this transition. As always, let us know what you think: [email protected].

  Read the article

• Weblogic 10.3.4 (PS3) nodemanager wont start?

  - by angelo.santagata

  Hi all, well Im back from Australia and one of the things which happened was Oracle announced the PS3 release of oracles SOA & Webcenter products have been released. Now I normally use pre-installed images but I always like to install the products at least once that way I get to see its installation caveats.. Here’s one. Installation on Windows 7 64bit, 64bit JVM, generic weblogic Server installer. All worked fine, EXCEPT I cant start the node manager, I get the following error <08-Feb-2011 17:16:48> <INFO> <Loading domains file: D:\products\wls1034\WLSERV~1.3\common\NODEMA~1\nodemanager.domains> <08-Feb-2011 17:16:48> <SEVERE> <Fatal error in node manager server> weblogic.nodemanager.common.ConfigException: Native version is enabled but nodemanager native library could not be loaded     at weblogic.nodemanager.server.NMServerConfig.initProcessControl(NMServerConfig.java:249)     at weblogic.nodemanager.server.NMServerConfig.<init>(NMServerConfig.java:190)     at weblogic.nodemanager.server.NMServer.init(NMServer.java:182)     at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:148)     at weblogic.nodemanager.server.NMServer.main(NMServer.java:390)     at weblogic.NodeManager.main(NodeManager.java:31) Caused by: java.lang.UnsatisfiedLinkError: D:\products\wls1034\wlserver_10.3\server\native\win\32\nodemanager.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform     at java.lang.ClassLoader$NativeLibrary.load(Native Method)     at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1803)     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1728)     at java.lang.Runtime.loadLibrary0(Runtime.java:823)     at java.lang.System.loadLibrary(System.java:1028)     at weblogic.nodemanager.util.WindowsProcessControl.<init>(WindowsProcessControl.java:17)     at weblogic.nodemanager.util.ProcessControlFactory.getProcessControl(ProcessControlFactory.java:24)     at weblogic.nodemanager.server.NMServerConfig.initProcessControl(NMServerConfig.java:247)     ... 5 more Ok it appears that the node manager has gotten confused and thinks this is a 32bit install of Weblogic Server whereas it is the 64bit install.. Might have been something I did, or didnt do, on installation (e.g. –d64 on the jvm command line), however the workaround is pretty easy. 1. Create a file called nodemanager.properties in %WL_HOME%\common\nodemanager on my machine it was D:\products\wls1034\wlserver_10.3\common\nodemanager 2. Add the following line to it NativeVersionEnabled=false 3. And start it up!, this will force it not to use .DLL files and use emulation/non native methods instead..  

  Read the article

• SQL Developer Data Modeler v3.3 Early Adopter: Search

  - by thatjeffsmith

  photo: Stuck in Customs via photopin cc The next version of Oracle SQL Developer Data Modeler is now available as an Early Adopter (read, beta) release. There are many new major feature enhancements to talk about, but today’s focus will be on the brand new Search mechanism. Data, data, data – SO MUCH data Google has made countless billions of dollars around a very efficient and intelligent search business. People have become accustomed to having their data accessible AND searchable. Data models can have thousands of entities or tables, each having dozens of attributes or columns. Imagine how hard it could be to find what you’re looking for here. This is the challenge we have tackled head-on in v3.3. Same location as the Search toolbar in Oracle SQL Developer (and most web browsers) Here’s how it works: Search as you type – wicked fast as the entire model is loaded into memory Supports regular expressions (regex) Results loaded to a new panel below Search across designs, models Search EVERYTHING, or filter by type Save your frequent searches Save your search results as a report Open common properties of object in search results and edit basic properties on-the-fly Want to just watch the video? We have a new Oracle Learning Library resource available now which introduces the new and improved Search mechanism in SQL Developer Data Modeler. Go watch the video and then come back. Some Screenshots This will be a pretty easy feature to pick up. Search is intuitive – we’ve already learned how to do search. Now we just have a better interface for it in SQL Developer Data Modeler. But just in case you need a couple of pointers… The SYS data dictionary in model form with Search Results If I type ‘translation’ in the search dialog, then the results will come up as hits are ‘resolved.’ By default, everything is searched, although I can filter the results after-the-fact. You can see where the search finds a match in the ‘Content’ column Save the Results as a Report If you limit the search results to a category and a model, then you can save the results as a report. All of the usual suspects You can optionally include the search string, which displays in the top of of the report as ‘PATTERN.’ You can save you common reporting setups as a template and reuse those as well. Here’s a sample HTML report: Yes, I like to search my search results report! Two More Ways to Search You can search ‘in context’ by opening the ‘Find’ dialog from an active design. You can do this using the ‘Search’ toolbar button or from a model context menu. Searching a specific model Instead of bringing up the old modal Find dialog, you now get to use the new and improved Search panel. Notice there’s no ‘Model’ drop-down to select and that the active Search form is now in the Search panel versus the search toolbar up top. What else is new in SQL Developer Data Modeler version 3.3? All kinds of goodies. You can send your model to Excel for quick edits/reviews and suck the changes back into your model, you can share objects between models, and much much more. You’ll find new videos and blog posts on the subject in the new few days and weeks. Enjoy! If you have any feedback or want to report bugs, please visit our forums.

  Read the article

• Silverlight Cream for February 07, 2011 -- #1043

  - by Dave Campbell

  In this Issue: Roy Dallal, Kevin Dockx, Gill Cleeren, Oren Gal, Colin Eberhardt, Rudi Grobler, Jesse Liberty, Shawn Wildermuth, Kirupa Chinnathambi, Jeremy Likness, Martin Krüger(-2-), Beth Massi, and Michael Crump. Above the Fold: Silverlight: "A Circular ProgressBar Style using an Attached ViewModel" Colin Eberhardt WP7: "Isolated Storage" Jesse Liberty Lightswitch: "How To Create Outlook Appointments from a LightSwitch Application" Beth Massi Shoutouts: Gergely Orosz has a summary of his 4-part series on Styles in Silverlight: Everything a Developer Needs To Know From SilverlightCream.com: Silverlight Memory Leak, Part 2 Roy Dallal has part 2 of his memory leak posts up... and discusses the results of runnin VMMap and some hints on how to make best use of it. Using a Channel Factory in Silverlight (instead of adding a Service Reference). With cows. Kevin Dockx has a post up for those of you that don't like the generated code that comes about when adding a service reference, and the answer is a Channel Factory... and he has an example app in the post that populates a list of cows... honest ... check it out. Getting ready for Microsoft Silverlight Exam 70-506 (Part 4) Gill Cleeren has Part 4 of his deep-dive into studying for the Silverlight Certification exam. This time out he's got probably half a gazillion links for working with data... seriously! Sync unlimited instances of one Silverlight application How about a cross-browser sync of an unlimited number of instances of the same Silverlight app... Oren Gal has just that going on, and discusses his first two attempts and how he finally honed in on the solution. A Circular ProgressBar Style using an Attached ViewModel Wow... check out what Colin Eberhardt's done with the "Progress Bar" ... using an Attached View Model which he discussed in a post a while back... these are awesome! WP7 - Professional Audio Recorder Rudi Grobler discusses an audio recorder for WP7 that uses the NAudio audio library for not only the recording but visualization. Isolated Storage Jesse Liberty's got his 30th 'From Scratch' post up and this time he's talking about Isolated Storage. Learning OData? MSDN and Shawn Wildermuth has the videos for you! Shawn Wildermuth produced a couple series of videos for MSDN on OData: Getting Started and Consuming OData... get the link on Shawn's post. Creating Sample Data from a Class - Page 1 Kirupa Chinnathambi shows us how to use a schema of your own design in Blend... yet still have Blend produce sample data A Pivot-Style Data Grid without the DataGrid Jeremy Likness discusses the lack of an open-source grid with dynamic columns ... let him know if you've done one! ... and then he continues on to demonstrate his build-out of the same. Synchronize a freeform drawing and a real path creation Martin Krüger has a few new samples up in the Expression Gallery. This first is taking mouse movement in an InkPresenter and creating path statements from it in a canvas and playing them back. How to: use Storyboard completed behaviors Martin Krüger's next post is about Storyboards and firing one off the end of another, in Blend... so he ended up producing a behavior for doing that... and it's in the Expression Gallery How To Create Outlook Appointments from a LightSwitch Application Beth Massi has a new Lightswitch post up... her previous was email from Lightswitch... this is Outlook appointments... pretty darn cool. Quick run through of the WP7 Developer Tools January 2011 Michael Crump has a really good Quick look at the new WP7 Dev Tools that were released last week posted on his blog Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Tile engine Texture not updating when numbers in array change

  - by Corey

  I draw my map from a txt file. I am using java with slick2d library. When I print the array the number changes in the array, but the texture doesn't change. public class Tiles { public Image[] tiles = new Image[5]; public int[][] map = new int[64][64]; public Image grass, dirt, fence, mound; private SpriteSheet tileSheet; public int tileWidth = 32; public int tileHeight = 32; public void init() throws IOException, SlickException { tileSheet = new SpriteSheet("assets/tiles.png", tileWidth, tileHeight); grass = tileSheet.getSprite(0, 0); dirt = tileSheet.getSprite(7, 7); fence = tileSheet.getSprite(2, 0); mound = tileSheet.getSprite(2, 6); tiles[0] = grass; tiles[1] = dirt; tiles[2] = fence; tiles[3] = mound; int x=0, y=0; BufferedReader in = new BufferedReader(new FileReader("assets/map.dat")); String line; while ((line = in.readLine()) != null) { String[] values = line.split(","); x = 0; for (String str : values) { int str_int = Integer.parseInt(str); map[x][y]=str_int; //System.out.print(map[x][y] + " "); x++; } //System.out.println(""); y++; } in.close(); } public void update(GameContainer gc) { } public void render(GameContainer gc) { for(int y = 0; y < map.length; y++) { for(int x = 0; x < map[0].length; x ++) { int textureIndex = map[x][y]; Image texture = tiles[textureIndex]; texture.draw(x*tileWidth,y*tileHeight); } } } } Mouse Picking Where I change the number in the array Input input = gc.getInput(); gc.getInput().setOffset(cameraX-400, cameraY-300); float mouseX = input.getMouseX(); float mouseY = input.getMouseY(); double mousetileX = Math.floor((double)mouseX/tiles.tileWidth); double mousetileY = Math.floor((double)mouseY/tiles.tileHeight); double playertileX = Math.floor(playerX/tiles.tileWidth); double playertileY = Math.floor(playerY/tiles.tileHeight); double lengthX = Math.abs((float)playertileX - mousetileX); double lengthY = Math.abs((float)playertileY - mousetileY); double distance = Math.sqrt((lengthX*lengthX)+(lengthY*lengthY)); if(input.isMousePressed(Input.MOUSE_LEFT_BUTTON) && distance < 4) { System.out.println("Clicked"); if(tiles.map[(int)mousetileX][(int)mousetileY] == 1) { tiles.map[(int)mousetileX][(int)mousetileY] = 0; } } I never ask a question until I have tried to figure it out myself. I have been stuck with this problem for two weeks. It's not like this site is made for asking questions or anything. So if you actually try to help me instead of telling me to use a debugger thank you. You either get told you have too much or too little code. Nothing is never enough for the people on here it's as bad as something like reddit. Idk what is wrong all my textures work when I render them it just doesn't update when the number in the array changes. I am obviously debugging when I say that I was printing the array and the number is changing like it should, so it's not a problem with my mouse picking code. It is a problem with my textures, but I don't know what because they all render correctly. That is why I need help.

  Read the article

• Where is the value of OEA

  - by [email protected]

  In a room full of architects, if you were to ask for the definition of enterprise architecture, or the importance thereof,  you are likely to get a number of varying view points ranging from,  a complete analysis of the digital assets of an organization,  to, a strategic alignment of business goals/objectives to IT initiatives.  Similiarily in a room full of senior business executives,  if you asked them how they see their IT groups and their effectiveness to align to business strategy,  you would get a myriad of responses,  ranging from, “a huge drain on our bottom line”, “always more expensive than budgeted”, “lack of agility,  by the time IT is ready,  my business strategy has changed”, and on the rare occurrence, “ a leader of innovation,  that is lock step with my business strategy”. However does this necessarily demonstrate the overall value of enterprise architecture.  Having a framework, and process is of critical importance to help produce a number of the artefacts that ultimately align technology goals and initiatives to business strategy,  however,  is that really where the value is?  I believe that first we need to understand the concept of value.  Value typically is a measure of sorts,  when we purchase a product it’s value is equivalent to the maximum amount that someone is willing to pay for the product,  however,  is the same equation valid in terms of the business value of enterprise architecture? Is the library of artefacts generated through a process/framework, inclusive of a strategic roadmap to realize the enterprise architecture where the value is? If we agree that enterprise architecture is the alignment of IT and IT assets to support business strategy, and by achieving our business strategy, we have we have increased the business value of the enterprise then;  it seems that, in order to really identify the true value of an enterprise architecture,  we need to understand how we measure business value .  A number of formal measurement methodologies exist for this purpose, business models, balanced scorecards, etc   After we have an understanding on how to measure the business value of each of the organizational units within an enterprise, then we understand how the enterprise architecture contributes to the success of business strategy,  and EXECUTE on the roadmap to implement, and deliver the IT initiatives that provide MEASUREABLE returns, As we analyse the value chain of each of the individual organizational units within the enterprise we may identify how that unit has performed by quantitatively measuring it proximity to achieving the goals defined by the business for each unit. However, It would appear that true business value (the aggregate of all of the business units in the value chain), is to some degree subjectively measured  as for public companies this lies in shareholder value,  as the true value, or be it, the maximum amount that someone would pay for shares of an organization.

  Read the article

• Windows Azure Use Case: New Development

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

  Read the article

• SQL SERVER – Learn SQL Server 2014 Online in a Day – My Latest Pluralsight Course

  - by Pinal Dave

  Click here watch SQL Server 2014 Administration New Features.  SQL Server 2014 was released earlier this year and it has been extremely popular in Microsoft world. Here is the announcement for everyone, who have been asking me to build a tutorial around SQL Server 2014. I have authored latest Pluralsight courses on the subject of SQL Server 2014. This course is 4 hours and 17 minutes long, but the best part is that this course contains all the latest features of SQL Server 2014. I have build this course with the assumption that DBA is familiar with earlier versions of SQL Server and wants to explore and learn new features of SQL Server 2014. The Challenge I Faced The biggest challenge I faced was how to come up with the outline for the course. The reason is that there are so many different features introduced in SQL Server 2014 that is will be difficult to cover each of the features in a single course. I wanted to cover the topics which are the most relevant and useful to developers, but in addition I also wanted to cover the topics which may be useful to develop if they know that they exists in the product. I finally decided to depend on blog readers and few of the SQL Experts. I reached out to selected 20 people via email and gave them a list of the topics which I should be covering in this course. They all work in different organizations and have a good understanding about the need of the DBA and Developers. Based on their feedback, I was able to come up with a very good outline which is currently very popular with Pluralsight library. Lots of people have asked me how was I able to come up with a course content outline so accurately. The credit for the same goes to the developers and DBA, who have voted in the topics and have helped me to build a very solid outline for the course. Outline of the Course Here is a quick outline for the course: Introduction Backup Enhancements Security Enhancements Columnstore Enhancements Online Data Operations Enhancements Enhancements with Microsoft Azure SSD Buffer Pool Extensions Resource Governor IO Miscellaneous Features Online Index Rebuilding Live Plans for Long Running Queries Transaction Durability Cardinality Estimation In Memory OLTP Optimization Well, I had a great fun working on the topics which I have mentioned in the outline. I am very confident that once you start with the course, you will indeed understand how each of the topics builds and presented. I have made sure that each of the topic has a vivid and clear story to begin with. I first explain the story and right after that I explain the concept. Who Should Attend This Course Everyone who has basic knowledge of SQL Server and wants to update themselves with SQL Server 2014. They should attend this course. One thing I have made sure that this course is easy to understand and I have decided complex subject into multiple parts. This way the learning is progressive and anyone with a poor knowledge of the subject can have enough time to understand the presented concept. Screenshot of the Course Here are few of the screenshot of the courses. How to Watch Video Course This course is available at Pluralsight, and you will need a valid login to Pluralsight. If you do not have Pluralsight login, you can quickly sign up for the FREE Trial. Click here watch SQL Server 2014 Administration New Features.  Reference: Pinal Dave (http://blog.SQLAuthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLAuthority News, T SQL, Video

  Read the article

• Access Music from Amie Street in Boxee

  - by Mysticgeek

  One of our favorite sites for discovering new music is Amie Street. Today we take a look at the Amie Street app for Boxee that allows you to access your favorite tunes from the Boxee interface. Amie Street is a cool site that allows you to discover a lot of cool music from independent artists. What makes Amie Street unique is that most of the music starts out free, then the price goes up incrementally as its popularity grows. The Amie Street App for Boxee let’s you access music and playlists you’ve created on the site, with more features are on the way. For this example we’re using the mouse and keyboard, but of course you can also get to each section using your remote if you have one. Or you can turn your iPod touch into a Boxee remote too. Amie Street in Boxee To access the Amie Street app, launch Boxee and click on Apps from the main menu. Under the Search Sidebar type in Amie Street and select it from the results field.   Then you can add it to the My Apps section…and double-click on the icon. Click on Start to begin using it. You’ll be be presented with a Welcome screen where you can sign into your account. If you don’t have an account yet, there is also an option to go to the Amie Street site and create one. Enter in your account credentials… Now you’ll be able to access your Library, Playlists, Search for new tunes, and check out your Recommended bands and artists. Hover the pointer over an album to get a bit more info about it such as the music genre. You’ll be able to play the songs from the playlists you created on the Amie Street site. You can browse through the history of the music you’ve played as well. Not all the features of this app seem to work as you’d expect them to, and some of the features are not yet available like the Browse feature.   Conclusion At the time of this writing we weren’t able to purchase music or get additional information about the artists. As development continues on Boxee and this app, you can expect more of a full user experience and the ability to purchase music. Even though some of the features are a bit buggy or not available, if you’re a Boxee user and a fan of Amie Street, this is cool app to add to your collection. Download Boxee for Windows, Mac, and Ubuntu Learn more about Amie Street on Boxee Similar Articles Productive Geek Tips Amie Street Downloader Makes Purchasing Music EasierFind Free or Cheap Indie Music at Amie StreetIntegrate Boxee with Media Center in Windows 7Using Pandora in BoxeeGetting Started with Boxee TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Watch World Cup Online On These Sites Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like)

  Read the article

• Customize SharePoint list using InfoPath2010 form Part4

  - by ybbest

  Customize SharePoint list using InfoPath2010 form Part1 Customize SharePoint list using InfoPath2010 form Part2 Customize SharePoint list using InfoPath2010 form Part3 In this post, I’d like to show you how to create print functionality in InfoPath for SharePoint list. The print functionality is provided out of box in InfoPath form library; however it is not available in SharePoint list. Here are the steps to create the print functionality.You can download the new form here. 1. Create print page in the list by first copy and paste the displayifs.aspx and rename the file to Printifs.aspx. 2. Open the page in the SharePoint designer and copy the following javascript to the PlaceHolderTitleAreaClass ContentPlaceHolder. <script type="text/javascript"> $(document).ready(function(){ $("[id^='Ribbon']").hide(); $(".s4-title").hide(); $("[id='s4-leftpanel']").hide(); $("[id='s4-ribbonrow']").hide(); $("[id='s4-titlerow']").hide(); $("[id='s4-titlerow']").css("height", "0px"); $("body").css("background-color", "white"); $("body").css("zoom", "135%"); $("[id='MSO_ContentTable']").css("margin-left", "0px"); $("[id='MT-BodyContent']").css("width", "900px"); $(".MT-BodyArea").css("width", "900px"); $("[id='MT-Layout']").css("width", "900px"); $(".ms-bodyareacell").css("width", "900px"); $(".s4-wpTopTable").css("border", "none"); $("[id$='XmlFormView']").css("margin-left", "-80px"); $("body").css("margin-top", "-30px"); $(":contains('CAPEX')").css("border", "5px solid #FFCC00"); window.print(); }); </script> 3. Open InfoPath form for the list and create a field called PrintLink 4. Set the default value of printLink that points to the print page I just created before with the query string id.You can download the formula for the default value here. 5. Add a new image that looks like Print button on the display view, then I can set the url to the Print link Field. (The reason I did not use button is that you cannot set the navigate url for the button). 6.Set the url of the image to the PrintLInk field. 7.Next , create the print view. 8. Copy the contents from the display view to print view 9. Finally, go to the printifs.aspx and edit the InfoPath web part to set the view to PrintView. 9. Republish you form you will see the form as shown below 10. If you click the Print button, you will see the print page and print dialog,you can also add the company logo in the print page using css as well. 11.To deploy the customization,you can use the backup and restore content database approach , you can get more details from my previous blog post here.

  Read the article

• Acr.ExtDirect &ndash; Part 1 &ndash; Method Resolvers

  - by Allan Ritchie

  One of the most important things of any open source libraries in my opinion is to be as open as possible while avoiding having your library become invasive to your code/business model design.  I personally could never stand marking my business and/or data access code with attributes everywhere.  XML also isn’t really a fav with too many people these days since it comes with a startup performance hit and requires runtime compiling.  I find that there is a whole ton of communication libraries out there currently requiring this (ie. WCF, RIA, etc).  Even though Acr.ExtDirect comes with its own set of attributes, you can piggy-back the [ServiceContract] & [OperationContract] attributes from WCF if you choose.  It goes beyond that though, there are 2 others “out-of-the-box” implementations – Convention based & XML Configuration.    Convention – I don’t actually recommend using this one since it opens up all of your public instance methods to remote execution calls. XML Configuration – This isn’t so bad but requires you enter all of your methods and there operation types into the Castle XML configuration & as I said earlier, XML isn’t the fav these days.   So what are your options if you don’t like attributes, convention, or XML Configuration?  Well, Acr.ExtDirect has its own extension base to give the API a list of methods and components to make available for remote execution.  1: public interface IDirectMethodResolver { 2:   3: bool IsServiceType(ComponentModel model, Type type); 4: string GetNamespace(ComponentModel model); 5: string[] GetDirectMethodNames(ComponentModel model); 6: DirectMethodType GetMethodType(ComponentModel model, MethodInfo method); 7: }   Now to implement our own method resolver:   1: public class TestResolver : IDirectMethodResolver { 2:   3: #region IDirectMethodResolver Members 4:   5: /// <summary> 6: /// Determine if you are calling a service 7: /// </summary> 8: /// <param name="model"></param> 9: /// <param name="type"></param> 10: /// <returns></returns> 11: public bool IsServiceType(ComponentModel model, Type type) { 12: return (type.Namespace == "MyBLL.Data"); 13: } 14:   15: /// <summary> 16: /// Return the calling name for the client side 17: /// </summary> 18: /// <param name="model"></param> 19: /// <returns></returns> 20: public string GetNamespace(ComponentModel model) { 21: return model.Name; 22: } 23:   24: public string[] GetDirectMethodNames(ComponentModel model) { 25: switch (model.Name) { 26: case "Products" : 27: return new [] { 28: "GetProducts", 29: "LoadProduct", 30: "Save", 31: "Update" 32: }; 33:   34: case "Categories" : 35: return new [] { 36: "GetProducts" 37: }; 38:   39: default : 40: throw new ArgumentException("Invalid type"); 41: } 42: } 43:   44: public DirectMethodType GetMethodType(ComponentModel model, MethodInfo method) { 45: if (method.Name.StartsWith("Save") || method.Name.StartsWith("Update")) 46: return DirectMethodType.FormSubmit; 47: 48: else if (method.Name.StartsWith("Load")) 49: return DirectMethodType.FormLoad; 50:   51: else 52: return DirectMethodType.Direct; 53: } 54:   55: #endregion 56: }   And there you have it, your own custom method resolver.  Pretty easy and pretty open ended!

  Read the article

• SFML fail to load image as texture

  - by zyeek

  I have come to a problem with the code below ... Using SFML 2.0 #include <SFML/Graphics.hpp> #include <iostream> #include <list> int main() { float speed = 5.0f; // create the window sf::RenderWindow window(sf::VideoMode(sf::VideoMode::getDesktopMode().height - 300, 800), "Bricks"); // Set game window position on the screen window.setPosition( sf::Vector2i(sf::VideoMode::getDesktopMode().width/4 + sf::VideoMode::getDesktopMode().width/16 , 0) ); // Allow library to accept repeatitive key presses (i.e. holding key) window.setKeyRepeatEnabled(true); // Hide mouse cursor //window.setMouseCursorVisible(false); // Limit 30 frames per sec; the minimum for all games window.setFramerateLimit(30); sf::Texture texture; if (!texture.loadFromFile("tile.png", sf::IntRect(0, 0, 125, 32))) { std::cout<<"Could not load image\n"; return -1; } // Empty list of sprites std::list<sf::Sprite> spriteContainer; bool gameFocus = true; // run the program as long as the window is open while (window.isOpen()) { sf::Vector2i mousePos = sf::Mouse::getPosition(window); // check all the window's events that were triggered since the last iteration of the loop sf::Event event; while (window.pollEvent(event)) { float offsetX = 0.0f, offsetY = 0.0f; if(event.type == sf::Event::GainedFocus) gameFocus = !gameFocus; else if(event.type == sf::Event::LostFocus) gameFocus = !gameFocus; if(event.type == sf::Event::KeyPressed) { if (event.key.code == sf::Keyboard::Space) { if(gameFocus) { // Create sprite and add features before putting it into container sf::Sprite sprite(texture); sprite.scale(.9f,.7f); sf::Vector2u textSize = texture.getSize(); sprite.setPosition(sf::Vector2f(mousePos.x-textSize.x/2.0f, mousePos.y - textSize.y/2.0f)); spriteContainer.push_front(sprite); } } if(event.key.code == sf::Keyboard::P) std::cout << spriteContainer.size() << std::endl; if( event.key.code == sf::Keyboard::W ) offsetY -= speed; if( event.key.code == sf::Keyboard::A ) offsetX -= speed; if( event.key.code == sf::Keyboard::S ) offsetY += speed; if( event.key.code == sf::Keyboard::D ) offsetX += speed; } // "close requested" event: we close the window if (event.type == sf::Event::Closed || event.key.code == sf::Keyboard::Escape) window.close(); // Move all sprites synchronously for (std::list<sf::Sprite>::iterator sprite = spriteContainer.begin(); sprite != spriteContainer.end(); ++sprite) sprite->move(offsetX, offsetY); //sprite.move(offsetX,offsetY); } // clear the window with black color window.clear(sf::Color::Black); // draw everything here... // window.draw(...); // Draw all sprites in the container for (std::list<sf::Sprite>::iterator sprite = spriteContainer.begin(); sprite != spriteContainer.end(); ++sprite) window.draw(*sprite); // end the current frame window.display(); } return 0; } A couple weeks ago it worked flawlessly to my expectation, but now that I come back to it and I am having problems importing the image as a texture "tile.png". I don't understand why this is evening happening and the only message I get via the terminal is "Cannot load image ..." then a bunch of random characters. My libraries are for sure working, but now I am not sure why the image is not loading. My image is in the same directory as with my .h and .cpp files. This is an irritating problem that keep coming up for some reason and is always a problem to fix it. I import my libraries via my own directory "locals" which contain many APIs, but I specifically get SFML, and done appropriately as I am able to open a window and many other stuff.

  Read the article

• How do I install Revenge of the Titans?

  - by Akash

  I've downloaded the .deb file of Revenge of the Titans, and installed it using Ubuntu Software Center. Now, when I try to launch it using the software launcher nothing happens. Any ideas? The .deb file was downloaded from the Humble Indie Bundle. I am unable to launch it from the terminal ( the command revenge-of-the-titans says command not found ). I also tried the .tar.gz. When I extract it and run ./revenge.sh , nothing happens. No output on the terminal or anything at all. I have set chmod 777 revenge.sh as well. The command /opt/revengeofthetitans/revenge.sh does not give any output. If I run gedit /opt/revengeofthetitans/revenge.sh in the terminal: > #!/bin/bash > # > # revenge.sh > # > ############################################################################### > > SCRIPT="`basename $0`" > GAMEDIR="${HOME}/.revenge_of_the_titans_1.80" LOGFILE="${GAMEDIR}/${SCRIPT}.log" > INSTDIR="`dirname $0`" ; cd > "${INSTDIR}" ; INSTDIR="`pwd`" > > [[ ! -d "${GAMEDIR}" ]] && mkdir -m > 0755 "${GAMEDIR}" > > JARPATH="patch.jar:RevengeOfTheTitans.jar:data-hib.jar:gfx.jar:fonts.jar:images.jar:music.jar:fx-mono.jar:fx-stereo.jar:gamecommerce.jar:common.jar:spgl-lite.jar:lwjgl.jar:lwjgl_util.jar:jorbis.jar:jinput.jar" > > # XMODIFIERS is cleared here to prevent SCIM screwing up keyboard > input XMODIFIERS= java \ > -noverify \ > -Djava.library.path="${INSTDIR}" \ > -Dorg.lwjgl.util.NoChecks=true \ > -Dorg.lwjgl.librarypath="${INSTDIR}" \ > -Dnet.puppygames.applet.Launcher.resources=/resources-hib.dat > \ > -Dnet.puppygames.applet.Game.gameResource=game.hib > \ > -XX:MaxGCPauseMillis=3 \ > -Xms64m \ > -Xmx375m \ > -Xincgc \ > -cp "${JARPATH}" \ > net.puppygames.applet.Launcher \ > "$@" \ > >"${LOGFILE}" 2>&1 > > exit 0 > > # > # EOF > # > ###############################################################################

  Read the article

• eSTEP Newsletter November 2012

  - by uwes

  Dear Partners,We would like to inform you that the November '12 issue of our Newsletter is now available.The issue contains information to the following topics: News from CorpOracle Celebrates 25 Years of SPARC Innovation; IDC White Papers Finds Growing Customer Comfort with Oracle Solaris Operating System; Oracle Buys Instantis; Pillar Axiom OpenWorld Highlights; Announcement Oracle Solaris 11.1 Availability (data sheet, new features, FAQ's, corporate pages, internal blog, download links, Oracle shop); Announcing StorageTek VSM 6; Announcement Oracle Solaris Cluster 4.1 Availability (new features, FAQ's, cluster corp page, download site, shop for media); Announcement: Oracle Database Appliance 2.4 patch update becomes available Technical SectionOracle White papers on SPARC SuperCluster; Understanding Parallel Execution; With LTFS, Tape is Gaining Storage Ground with additional link to How to Create Oracle Solaris 11 Zones with Oracle Enterprise Manager Ops Center; Provisioning Capabilities of Oracle Enterprise Ops Center Manager 12c; Maximizing your SPARC T4 Oracle Solaris Application Performance with the following articles: SPARC T4 Servers Set World Record on Siebel CRM 8.1.1.4 Benchmark, SPARC T4-Based Highly Scalable Solutions Posts New World Record on SPECjEnterprise2010 Benchmark, SPARC T4 Server Delivers Outstanding Performance on Oracle Business Intelligence Enterprise Edition 11g; Oracle SUN ZFS Storage Appliance Reference Architecture for VMware vSphere4;  Why 4K? - George Wilson's ZFS Day Talk; Pillar Axiom 600 with connected subjects: Oracle Introduces Pillar Axiom Release 5 Storage System Software, Driving down the high cost of Storage, This Provisioning with Pilar Axiom 600, Pillar Axiom 600- System overview and architecture; Migrate to Oracle;s SPARC Systems; Top 5 Reasons to Migrate to Oracle's SPARC Systems Learning & EventsRecently delivered Techcasts: Learning Paths; Oracle Database 11g: Database Administration (New) - Learning Path; Webcast: Drill Down on Disaster Recovery; What are Oracle Users Doing to Improve Availability and Disaster Recovery; SAP NetWeaver and Oracle Exadata Database Machine ReferencesARTstor Selects Oracle’s Sun ZFS Storage 7420 Appliances To Support Rapidly Growing Digital Image Library, Scottish Widows Cuts Sales Administration 20%, Reduces Time to Prepare Reports by 75%, and Achieves Return on Investment in First Year, Oracle's CRM Cloud Service Powers Innovation: Applications on Demand; Technology on Demand, How toHow to Migrate Your Data to Oracle Solaris 11 Using Shadow Migration; Using svcbundle to Create SMF Manifests and Profiles in Oracle Solaris 11; How to prepare a Sun ZFS Storage Appliance to Serve as a Storage Devise with Oracle Enterprise Manager Ops Center 12c; Command Summary: Basic Operations with the Image Packaging System In Oracle Solaris 11; How to Update to Oracle Solaris 11.1 Using the Image Packaging System, How to Migrate Oracle Database from Oracle Solaris 8 to Oracle Solaris 11;  Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster; Ease the Chaos with Automated Patching: Oracle Enterprise Manager Cloud Control 12c; Book excerpt: Oracle Exalogic Elastic Cloud Handbook You find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab. Feel free to explore and any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner HW Enablement EMEA

  Read the article

• Release 17 is here!

  - by Cheryl

  Our training development team has been busy updating courses to keep pace with the new release of CRM On Demand. Release 17 is here! And I heard recently that it's one of our biggest releases ever. A lot of new features and functionality for you to take advantage of - too much for me to cover in this blog post. But, I thought I'd tell you about a few of my favorites - be sure to take a look at the What's New in Release 17 recording to see the full list, though...because I'm only going to touch on a few. Create your own look - okay, I'm starting with the fun stuff. But, there is a new customizable themes feature so that you can change the look of the application; colors, logo, the shape of the tabs. And it's really easy. There's also a whole new library of ready-made themes for you to pick from if you just want to go with one of those. Use this new feature to match the look of your company logo and color scheme. Or blaze new trails. You can create the look for the whole company, or a different look for each CRM On Demand role. This might especially come in handy if you're using the Partner Relationship Management (PRM) capabilities of CRM On Demand - you can create themes for your partner-facing roles to provide branded partner portals. Speaking of PRM - there are enhancements in this release to help companies better manage their partner relationships. A new Deal Registration object, which is separate from the Opportunity record, and better Special Pricing Request and Marketing Development Fund Request processes, give a lot more flexibility in how companies can build and manage their relationships with partners. Some new options for Forecasts in in Release 17, too. You can now have more than one type of forecast generated each forecast period. For example, you might need to see a forecast of the total opportunity revenue for your sales team, as well as on that breaks down revenue by product. The forecast definition now lets you do that. Other options allow you to make submitting forecasts easier, split opportunity revenue across the team and forecast that split appropriately. And - look for the new Forecast subject area in Answers, for building custom forecast reports. Ever wish you could use Workflow Rules to automatically reassign leads if they haven't been followed up on...or to email a manager if the status of a service request isn't changed after a specified period of time? Then check out the new Wait action for workflows. I think you'll be happy. Ok, enough for today. There is a lot to Release 17 that I didn't mention - a lot has been added for our Life Science industry edition, some new data visibility options, a new Data Loader tool, and more. Stay tuned for more blog posts about these and other Release 17 features in the coming weeks. In the meantime, don't forget about all of the resources we have for you to learn more (see my Learning About Release 17 blog post for details).

  Read the article

• Silverlight Cream for February 21, 2011 -- #1049

  - by Dave Campbell

  In this Issue: Rob Eisenberg(-2-), Gill Cleeren, Colin Eberhardt, Alex van Beek, Ishai Hachlili, Ollie Riches, Kevin Dockx, WindowsPhoneGeek(-2-), Jesse Liberty(-2-), and John Papa. Above the Fold: Silverlight: "Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4" Alex van Beek WP7: "Google Sky on Windows Phone 7" Colin Eberhardt Shoutouts: My friends at SilverlightShow have their top 5 for last week posted: SilverlightShow for Feb 14 - 20, 2011 From SilverlightCream.com: Rob Eisenberg MVVMs Us with Caliburn.Micro! Rob Eisenberg chats with Carl and Richard on .NET Rocks episode 638 about Caliburn.Micro which takes Convention-over-Configuration further, utilizing naming conventions to handle a large number of data binding, validation and other action-based characteristics in your app. Two Caliburn Releases in One Day! Rob Eisenberg also announced that release candidates for both Caliburn 2.0 and Caliburn.Micro 1.0 are now available. Check out the docs and get the bits. Getting ready for Microsoft Silverlight Exam 70-506 (Part 6) Gill Cleeren has Part 6 of his series on getting ready for the Silverlight Exam up at SilverlightShow.... this time out, Gill is discussing app startup, localization, and using resource dictionaries, just to name a few things. Google Sky on Windows Phone 7 Colin Eberhardt has a very cool WP7 app described where he's using Google Sky as the tile source for Bing Maps, and then has a list of 110 Messier Objects.. interesting astronomical objects that you can look at... all with source! Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4 Alex van Beek has some Prism4/Unity MVVM goodness up with this discussion of a login module using View and ViewModel base classes. Windows Phone 7 and WCF REST – Authentication Solutions Ishai Hachlili sent me this link to his post about WCF REST web service and authentication for WP7, and he offers up 2 solutions... from the looks of this, I'm also putting his blog on my watch list WP7Contrib: Isolated Storage Cache Provider Ollie Riches has a complete explanation and code example of using the IsolatedStorageCacheProvider in their WP7Contrib library. Using a ChannelFactory in Silverlight, part two: binary cows & new-born calves Kevin Dockx follows-up his post on Channel Factories with this part 2, expanding the knowledge-base into usin parameters and custom binding with binary encoding, both from reader suggestions. All about UriMapping in WP7 WindowsPhoneGeek has a post up about URI mappings in WP7 ... what it is, how to enable it in code behind or XAML, then using it either with a hyperlink button or via the NavigationService class... all with code. Passing WP7 Memory Consumption requirements with the Coding4Fun MemoryCounter tool WindowsPhoneGeek's latest is a tutorial on the use of the Memory Counter control from the Coding4Fun toolkit and WP7 Memory consumption. Getting Started With Linq Jesse Liberty gets into LINQ in his Episode 33 of his WP7 'From Scratch' series... looks like a good LINQ starting point, and he's going to be doing a series on it. Linq with Objects In his second post on LINQ, Jesse Liberty is looking at creating a Linq query against a collection of objects... always good stuff, Jesse! Silverlight TV Silverlight TV 62: The Silverlight 5 Triad Unplugged John Papa is joined by Sam George, Larry Olson, and Vijay Devetha (the Silverlight Triad) on this Silverlight TV episode 62 to discuss how the team works together, and hey... they're hiring! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• C++ problem with assimp 3D model loader

  - by Brendan Webster

  In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

  Read the article

• UPK Hands-on Labs at OHUG

  - by Karen Rihs

  Going to OHUG, June 18-22? Be sure to attend one or more UPK hands-on labs! Choose from Basic, Advanced, What's New, and Prebuilt Content!   Oracle User Productivity Kit 11.1 Workshop – Basic Stephen Armbruster, Oracle Corporation June 19, 2012, 11:00 a.m. – 12:00 p.m. June 20, 2012, 4:30 – 5:30 p.m. The User Productivity Kit (UPK) is a comprehensive, cost-effective, customizable solution that helps your organization quickly create the critical documentation, training, and support materials needed to drive project team and user productivity throughout the lifecycle of your software. The User Productivity Kit provides system process documentation, user acceptance test scripts, comprehensive instructor-led training materials, web-based training materials, role-based performance support, and complete documentation. Also provided is the UPK Developer, which serves as a single-source development and customization tool to enable rapid content creation and customization. The User Productivity Kit delivers: Business process documentation for fit-gap analysis - providing time and cost savings that jump-start your implementation or upgrade User Acceptance test scripts to help test applications prior to go-live State-of-the-art instructional design tools to rapidly build and tailor documentation, instructor-led training materials, and web-based training to fit organizational needs Live-application performance support with transactional and procedural information to maximize user efficiency. By registering for this hands-on UPK workshop, participants will use UPK to build an application job aid and simulation that can be used as performance support for the application. But hurry, space is limited! Oracle User Productivity Kit 11.1 Workshop – Advanced Stephen Armbruster, Oracle Corporation June 20, 2012, 1:30 – 2:30 p.m. This special workshop is for those already familiar with UPK and will cover advanced concepts. In this workshop, you will gain an in-depth knowledge of working with the UPK Developer. Following this workshop, you will be able to: Create publishing categories Add a logo to a publishing project Publish using the newly created category Configure your own library view Manage topic history in a multi-user environment Oracle User Productivity Kit 11.1 Workshop – What’s NEW! Stephen Armbruster, Oracle Corporation June 19, 2012, 1:30 – 2:30 p.m. June 21, 2012, 1:00 – 2:00 p.m. This special workshop is for those already familiar with UPK and will focus on the new features included in the latest version 11.1. In this workshop, you will review most of the new features included in the UPK Developer. Oracle User Productivity Kit 11.1 Workshop – Prebuilt Content Stephen Armbruster, Oracle Corporation June 19, 2012, 4:30 – 5:30 p.m. June 21, 2012, 2:15 – 3:15 p.m. This special workshop is for those already familiar with UPK and will focus on the latest version 11.1. At the end of this workshop, you will be able to demonstrate how to: Import prebuilt content Modify content frames Add a decision frame Translate a topic into Spanish Stephen Armbruster is a principal sales consultant, specializing in HCM and UPK applications for Oracle over the past twelve years. In addition to his current role, he serves as an ambassador for the Fusion User Experience (UX) team and is tasked with evangelizing the UX for end users across all Oracle brands (Fusion, PSFT, JDE, and EBS).  He is also a trusted advisor to Oracle’s Product Management teams related to Learning Management Systems (LMS). Prior to joining Oracle, he was an instructor as well as an instructional technologist working in the medical diagnostics, high tech, and information management industries. As an expert in both LMS and UPK, he regularly speaks at Oracle conferences including Oracle OpenWorld and OHUG on topics that span using Oracle solutions to accomplish employee training, certification, and user adoption. His presentations are both entertaining and engaging.

  Read the article

< Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >