Search Results

Search found 17973 results on 719 pages for 'x frame options'.

Page 559/719 | < Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >

• No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

  - by Nick

  I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

  Read the article

• SQL SERVER – ERROR: FIX using Compatibility Level – Database diagram support objects cannot be installed because this database does not have a valid owner – Part 2

  - by pinaldave

  Earlier I wrote a blog post about how to resolve the error with database diagram. Today I faced the same error when I was dealing with a database which is upgraded from SQL Server 2005 to SQL Server 2008 R2. When I was searching for the solution online I ended up on my own earlier solution SQL SERVER – ERROR: FIX – Database diagram support objects cannot be installed because this database does not have a valid owner. I really found it interesting that I ended up on my own solution. However, the solution to the problem this time was a bit different. Let us see how we can resolve the same. Error: Database diagram support objects cannot be installed because this database does not have a valid owner. To continue, first use the Files page of the Database Properties dialog box or the ALTER AUTHORIZATION statement to set the database owner to a valid login, then add the database diagram support objects. Workaround / Fix / Solution : Follow the steps listed below and it should for sure solve your problem. (NOTE: Please try this for the databases upgraded from previous version. For everybody else you should just follow the steps mentioned here.) Select your database >> Right Click >> Select Properties Go to the Options In the Dropdown at right labeled “Compatibility Level” choose “SQL Server 2005(90)” Select FILE in left side of page In the OWNER box, select button which has three dots (…) in it Now select user ‘sa’ or NT AUTHORITY\SYSTEM and click OK. This will solve your problem. However, there is one very important note you must consider. When you change any database owner, there are always security related implications. I suggest you check your security policies before changing authorization. I did this to quickly solve my problem on my development server. If you are on production server, you may open yourself to potential security compromise. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• When a problem is resolved

  - by Rob Farley

  This month’s T-SQL Tuesday is hosted by Jen McCown, and she’s picked the topic of Resolutions. It’s a new year, and she’s thinking about what people have resolved to do this year. Unfortunately, I’ve never really done resolutions like that. I see too many people resolve to quit smoking, or lose weight, or whatever, and fail miserably. I’m not saying I don’t set goals, but it’s not a thing for New Year. The obvious joke is “1920x1080” as a resolution, but I’m not going there. I think Resolving is a strange word. It makes it sound like I’m having to solve a problem a second time, when actually, it’s more along the lines of solving a problem well enough for it to count as finished. If something has been resolved, a solution has been provided. There is a resolution, through the provision of a solution. It’s a strangeness of English. When I look up the word resolution at dictionary.com, it has 12 options, including “settling of a problem”. There’s a finality about resolution. If you resolve to do something, you’re saying “Yes. This is a done thing. I’m resolving to do it, which means that it may as well be complete already.” I like to think I resolve problems, rather than just solving them. I want my solving to be final and complete. If I tune a query, I don’t want to find that I’m back in there, re-tuning it at some point. Strangely, if I re-solve a problem, that implies that I didn’t resolve it in the first place. I only solved it. Temporarily. We “data-folk” live in a world where the most common answer is “It depends.” Frustratingly, the thing an answer depends on may still be changing in the system in question. That probably means that any solution that is put in place may need reinvestigating at some point later. So do I resolve things? Yes. Am I Chuck Norris, and solve things so well the world would break first? No. Do these two claims happily sit beside each other? No, unfortunately not. But I happily take responsibility for things, and let my clients depend on me to see it through. As far as they are concerned, it is resolved. And so I resolve to keep resolving, right through 2011.

  Read the article

• Several New Hints

  - by Ondrej Brejla

  Hi all! Today we would like to introduce you some of our new experimental hints for NetBeans 7.2. They are called: Unused Use Statement and Immutable Variables. Unused Use Statement This hint is quite simple. It highlights (underlines) your use statements, which are not used. Typical use case is after some refactoring, when you forgot to remove some obsolete use statements. This hint warns you on them and allows you to remove them easily. Just click on the hint bulb in the gutter and select Remove Unused Use Statement. And of course, it works in multiple use statements combined too. Immutable Variables The next one is the hint which checks too many assignments into a variable. And why? That's simple. Mostly you should use just one assignment into one variable. But sometimes you are lazy and you do something like: But it's quite wrong, because what you really do is: And that's exactly the case, when our new hint warns you, that Too many assignments (2) into variable $foo occured. Nothing more. Yes, we know that there are some cases, where could be more assignments and no warning should occur, e.g.: Because maybe one likes longer increment syntax more than the short one. So we tried to handle these cases to don't bother you if it's not a need. Note: We are almost sure that this hint doesn't cover all your use cases, because there are a lot of them. So if you find something strange, write it into our bugzilla so we can handle it better for you. Thanks for your patience! And the last thing is, that you can set the number of allowed assignments in Tools -> Options -> Editor -> Hints -> PHP: Immutable Variables. Note: This hint works just for a common variables, not for fields. We have an enhancement request for that and it should be implemented in next version of NetBeans (probably 7.3). And that's all for today and as usual, please test it and if you find something strange, don't hesitate to file a new issue (product php, component Editor). Thanks.

  Read the article

• New Worklist features on 12.1.3

  - by Vijay Shanmugam

  Following new Worklist features are available on E-Business Suite 12.1.3 via Patch 13646173. Ability to view comments on top of a notification If an action is performed on a notification such as Reassign, Request for Information or Provide Information, the recipient of the notification will see who performed the last action and the associated comment on top of the notification. Reassigning a request for information notification If an approver requests more information on a notification from it's submitter, the submitter now has two options Answer Request for More Information Transfer Request for More Information If the submitter thinks the requested information can be provided by another user, he/she can transfer the request to the other user. Please note that only Transfer is supported for Request for More Information. Once transferred, the submitter cannot access the notification and provide the requested information. Use actual sent date when reassigning a notification The Sent field in notification header always showed the date on which the notification was first created. If the notification was later reassigned, the Sent date was not updated to show the last action date. This caused problems in following scenario Approval notification was sent to JACK on 01-JAN-2012 JACK waited for 10 days before reassigning to JILL on 10-JAN-2012 JILL does not see the notification as sent on 10-JAN-2012, instead sees it as sent on 01-JAN-2012 Although the notification was originally created on 01-JAN-2012, it was sent to JILL only on 10-JAN-2012 The enhancement now shows the correct sent date in Worklist and Notification Details page. Figure 1 - Depicts all the above 3 features Related Action History for response required notification So far it was possible to embed Action History of an response-required notification into another FYI notification using #RELATED_HISTORY attribute (Please refer to Workflow Developer Guide for details about this attribute). The enhancement now enables developers to embed Action History of one response-required notification into another response-required notification. To embed Action History of one response-required notification into another, create message attribute #RELATED_HISTORY. To this attribute set a value during run-time in the following format. {TITLE}[ITEM_TYPE:ITEM_KEY]PROCESS_NAME:ACTIVITY_LABEL_NAMEThe TITLE, ITEM_TYPE and ITEM_KEY are optional values. TITLE is used as Related Action History header title. If TITLE is not present, then a default title "Related Action History" is shown. If ITEM_TYPE is present and ITEM_KEY is not, For Example: {TITLE}[ITEM_TYPE]PROCESS_NAME:ACTIVITY_LABEL_NAME , the Related Action History is populated from parent item type of the current item. If both ITEM_TYPE and ITEM_KEY is present, For Example: {TITLE}[ITEM_TYPE:ITEM_KEY]PROCESS_NAME:ACTIVITY_LABEL_NAME , the Related Action History is populated from that specific instance activity. Figure 2 - Depicts Related Action History feature

  Read the article

• Configurable tables in sql database

  - by dot

  I have the following tables in my database: Config Table: ====================================== Start_Range | End Range | Config_id 10 | 15 | 1 ====================================== Available_UserIDs ========================== ID | UserID | Used_YN | 1 | 10 | t | 1 | 11 | f | 1 | 12 | f | 1 | 13 | f | 1 | 14 | f | 1 | 15 | f | ========================== Users ========================== UserId | FName | LName | 10 |John | Doe | ========================== This is used in a reservation system of sorts... which lets an administrator specify a range of numbers that will be assigned to users in the config table. Once the range has been defined, the system then populates the Available_userIDs table with all the numbers in between the range, and sets the Used_YN flag to false As users sign up, they grab the next user_id number that's not in use... and reserve it. Then the system adds a record to the Users table. Once the admin has specified a range, it is possible that they can change it. For example, they can start with 10-15... and then when the range is used up, they should be able to specify another range like 16 - 99. I've put a unique constraint on the Available_UserIDs table, as well as on the Users table - to ensure that UserIds can't be duplicated. My questions are as follows: What's the best way to prevent the admins from using a range that's already in use? I thought of the following options: -- check either the Users table to see if the start range or ending range numbers are being used. If they are, assume that all the numbers in between are in use too, and reject the range. -- let them specify whatever they want, try to populate the Available_UserIDs table. If there are duplicates, just ignore that specific error message from the database and continue on. How do I find gaps in the number ranges? For example, if they specify 10-15, and then 20-25, it'd be nice to be able to somehow suggest on my web page that 16-19 is currently available. I found this article: http://stackoverflow.com/questions/1312101/how-to-find-a-gap-in-running-counter-with-sql But it only seems to return the first available number... so in my example above, it would only return the number 16. I'm sure there's a simpler way to do things that I'm overlooking!

  Read the article

• How can I set up Friendly URL to Nginx?

  - by MKK

  I'm trying to use dokuwiki with its Friendly URL on Nginx. The problem that I'm facing is, it doesn' show correct path to any link(even stylesheet, and images) on every page It looks that paths are missing wiki/ part. If I click on the image and show its destination, it shows this url http://foo-sample.com/lib/tpl/dokuwiki/images/logo.png But it has to be this below. http://foo-sample.com/wiki/lib/tpl/dokuwiki/images/logo.png and login URL is not working either. If I click on login link, it takes me to http://foo-sample.com/wiki/start?do=login&sectok=ff7d4a68936033ed398a8b82ac9 and it says 404 Not Found I took a look at this https://www.dokuwiki.org/rewrite#nginx and tried as much as possible. However it still doesn't work. Here's my conf files. How can I fix this problem? dokuwiki is set in /usr/share/wiki /etc/nginx/conf.d/rails.conf upstream sample { ip_hash; server unix:/var/run/unicorn/unicorn_foo-sample.sock fail_timeout=0; } server { listen 80; server_name foo-sample.com; root /var/www/html/foo-sample/public; location /wiki { alias /usr/share/wiki; index doku.php; } location ~ ^/wiki.+\.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index doku.php; fastcgi_split_path_info ^/wiki(.+\.php)(.*)$; fastcgi_param SCRIPT_FILENAME /usr/share/wiki$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } /usr/share/wiki/.htaccess ## Enable this to restrict editing to logged in users only ## You should disable Indexes and MultiViews either here or in the ## global config. Symlinks maybe needed for URL rewriting. #Options -Indexes -MultiViews +FollowSymLinks ## make sure nobody gets the htaccess files <Files ~ "^[\._]ht"> Order allow,deny Deny from all Satisfy All </Files> # Uncomment these rules if you want to have nice URLs using # $conf['userewrite'] = 1 - not needed for rewrite mode 2 # Not all installations will require the following line. If you do, # change "/dokuwiki" to the path to your dokuwiki directory relative # to your document root. # If you enable DokuWikis XML-RPC interface, you should consider to # restrict access to it over HTTPS only! Uncomment the following two # rules if your server setup allows HTTPS. RewriteCond %{HTTPS} !=on RewriteRule ^lib/exe/xmlrpc.php$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R=301] <IfModule mod_geoip.c> GeoIPEnable On Order deny,allow deny from all SetEnvIf GEOIP_COUNTRY_CODE JP AllowCountry Allow from .googlebot.com Allow from .yahoo.net Allow from .msn.com Allow from env=AllowCountry </IfModule>

  Read the article

• WebCenter Customer Spotlight: SICE

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummarySociedad Ibérica de Construcciones Eléctricas, S.A. (SICE) is a Spanish company specializes in engineering and technology integration for intelligent transport systems and environmental control systems. They had a large quantity of engineering and environmental planning documents  which they wanted to manage, classify and integrate with their existing enterprise resource planning (ERP) system. SICE adapted  Oracle WebCenter Content to classify and manage more than 30 different types, defined a security plan to ensure the integrity and recovery of various document types and integrated the document management solution with SICE’s third-party enterprise resource planning (ERP) system. SICE  accelerated time to market for all projects, minimized time required to identify and recover documents  and achieved greater efficiency in all operations. Company Overview Created in 1921, Sociedad Ibérica de Construcciones Eléctricas, S.A. (SICE) currently specializes in engineering and technology integration for intelligent transport systems and environmental control systems. It has more than 2,500 employees, with operations in Spain and various locations in Latin America, the United States, Africa, and Australia. Business Challenges They had a large quantity of engineering and environmental planning documents generated in research and projects which they wanted to manage, classify and integrate with their existing enterprise resource planning (ERP) system. Solution Deployed SICE worked with the Oracle Partner ABAST Solutions to evaluate and choose the best document management system, ultimately selecting Oracle WebCenter Content over other options including  Documentum, SharePoint, OpenText, and Alfresco.They adapted Oracle WebCenter Content to classify and manage more than 30 different types, defined a security plan to ensure the integrity and recovery of various document types and integrated the document management solution  with SICE’s third-party enterprise resource planning (ERP) system to accelerate incorporation with the documentation system and ensure integrity ERP system data. Business Results SICE  accelerated time to market for all projects by releasing reports and information that support and validate engineering projects, stored all documents in a single repository with organizationwide accessibility, minimizing time required to identify and recover documents needed for reports to initiate and execute engineering and building projects. Overall they achieved greater efficiency in all operations, including technical and impact report development and construction documentation management. “The correct and efficient management of information is vital to our environmental management activity. Oracle WebCenter Content  serves as a basis for knowledge management practices, with the objective of adding greater value to everything that we do.” Manuel Delgado, IT Project Engineering, Sociedad Ibérica de Construcciones Eléctricas, S.A Additional Information SICE Customer Snapshot Oracle WebCenter Content

  Read the article

• PeopleSoft New Design Solves Navigation Problem

  - by Applications User Experience

  Anna Budovsky, User Experience Principal Designer, Applications User Experience In PeopleSoft we strive to improve User Experience on all levels. Simplifying navigation and streamlining access to the most important pages is always an important goal. No one likes to waste time waiting for pages to load and watching a spinning glass going on and on. Those performance-affecting server trips, page-load waits and just-too-many clicks were complained about for a long time. Something had to be done. A few new designs came in PeopleSoft 9.2 helping users to access their everyday work areas easier and faster. For example, Dashboard and Work Center aggregate most accessed information sections on a single page; Related Information allows users to complete transaction-related-research without interrupting a transaction and Secure Search gets users to a specific page directly. Today we’ll talk about the Actions menu. Most PeopleSoft pages are shared between individual products and product lines. It means changing the content on a single page involves Oracle development and quality assurance time for making and testing the changes. In order to streamline the navigation and cut down on accessing PeopleSoft pages one-page-at-a-time, we introduced a new menu design. The new menu allows accessing shared pages without the Oracle development team making any local changes, and it works as an additional one-click-path to specific high-traffic actionable pages. Let’s look at how many steps it took to Change Salary for an employee in HCM 9.1 before: Figure 1. BEFORE: The 6 steps a user would take to Change Salary in PeopleSoft HCM 9.1 In PeopleSoft 9.1 it took 5 steps + page loading time + additional verification time for making sure a correct employee is selected from the table. In PeopleSoft 9.2 it only takes 2 steps. To complete Ad Hoc Change Salary action, the user can start from the HCM Manager's Dashboard, click the Action menu within a table, choose a menu option, and access a correct employee’s details page to take an action. Figure 2. AFTER: The 2 steps a user would take to Change Salary in PeopleSoft HCM 9.2 The new menu is placed on a row level which ensures the user accesses the correct employee’s details page. The Actions menu separates menu options into hierarchical sections which help to scan and access the correct option quickly. The new menu’s small size and its structure enabled users to access high-traffic pages from any page and from any part of the page. No more spinning hourglass, no more multiple pages upload. The flexible design fits anywhere on a page and provides a fast and reliable path to the correct destination within the product. Now users can: Access any target page no matter how far it is buried from the starting point; Reduce navigation and page-load time; Improve productivity and reduce errors. The new menu design is available and widely used in all PeopleSoft 9.2 product lines.

  Read the article

• Home directory messed up

  - by nuthan

  Recently, I installed Ubuntu 12.04. For some reason, i backed-up my home directory contents to another directory(say bkp dir). Precisely, I moved Documents, Pictures, Downloads, etc.. to bkp directory. Now, Deleted all my original home directory contents. I restored all the bkp directory content back to home. I find them all on my Desktop. I believe some kinda chain is broken. I dont find respective home directories icons on them. How do i restore it? Also, i dont find them in my places options. Messed up image link Thanks... ls -lh ~ ~/Desktop nuthan@nuthan-desktop:~$ ls -lh ~ ~/Desktop /home/nuthan: total 2.8M drwxr-x--- 11 nuthan nuthan 4.0K May 28 20:05 android-sdk-linux drwxrwxr-x 4 nuthan nuthan 4.0K May 25 13:36 android-sdks drwxrwxr-x 2 nuthan nuthan 4.0K May 18 17:30 convert -rw-rw-r-- 1 nuthan nuthan 0 May 30 09:07 dependancies~ drwxr-xr-x 2 nuthan nuthan 4.0K Jun 6 14:16 Desktop drwxrwxrwx 6 nuthan nuthan 4.0K Jun 6 12:06 Documents drwxr-xr-x 28 nuthan nuthan 12K Jun 6 13:52 Downloads drwxrwxr-x 2 nuthan nuthan 4.0K Mar 6 13:23 examples -rw-r--r-- 1 nuthan nuthan 8.3K May 11 16:19 examples.desktop drwxrwxr-x 4 nuthan nuthan 4.0K May 18 19:04 github -rw-rw-r-- 1 nuthan nuthan 0 May 28 18:40 linux~ drwxr-xr-x 2 nuthan nuthan 4.0K May 11 16:46 Music drwxrwxr-x 2 nuthan nuthan 4.0K May 30 08:48 node-code drwxrwxr-x 4 nuthan nuthan 4.0K May 30 08:40 node_modules drwxr-xr-x 7 nuthan nuthan 4.0K May 25 13:55 noduino drwxrwxr-x 2 nuthan nuthan 4.0K May 30 11:58 nuthan drwxrwxrwx 3 nuthan nuthan 4.0K May 24 11:13 Pictures drwxrwxr-x 6 nuthan nuthan 4.0K Mar 6 13:23 public drwxr-xr-x 2 nuthan nuthan 4.0K May 25 11:44 Public drwxrwxr-x 2 nuthan nuthan 4.0K May 29 18:50 python -rw-rw-r-- 1 nuthan nuthan 983K Jun 6 14:16 Screenshot from 2012-06-06 14:16:37.png -rw-rw-r-- 1 nuthan nuthan 980K Jun 6 14:20 Screenshot from 2012-06-06 14:20:24.png -rw-rw-r-- 1 nuthan nuthan 731K Jun 6 14:22 Screenshot from 2012-06-06 14:22:06.png drwxrwxr-x 3 nuthan nuthan 4.0K May 31 18:17 sketchbook drwxrwxr-x 2 nuthan nuthan 4.0K Jun 6 13:05 sql -rw-rw-r-- 1 nuthan nuthan 201 May 28 22:08 sql~ drwxr-xr-x 2 nuthan nuthan 4.0K May 11 16:46 Templates -rw-rw-r-- 1 nuthan nuthan 5.1K Jun 4 12:29 test~ drwxrwxr-x 3 nuthan nuthan 4.0K May 14 11:09 Titanium_Studio drwxrwxr-x 4 nuthan nuthan 4.0K May 14 21:00 Titanium Studio Workspace drwxrwxr-x 4 nuthan nuthan 4.0K Jun 1 18:29 TPM_Trak drwxrwxr-x 2 nuthan nuthan 4.0K May 24 17:30 Ubuntu One drwxr-xr-x 2 nuthan nuthan 4.0K May 11 16:46 Videos drwxrwxr-x 6 nuthan nuthan 4.0K May 31 15:10 workspace drwxrwxr-x 3 nuthan nuthan 4.0K May 14 11:57 Zend /home/nuthan/Desktop: total 20K -rw-rw-r-- 1 nuthan nuthan 441 May 30 09:07 dependancies -rw-rw-r-- 1 nuthan nuthan 1.6K May 28 18:40 linux -rw-rw-r-- 1 nuthan nuthan 470 May 28 22:16 sql -rw-rw-r-- 1 nuthan nuthan 5.1K Jun 4 19:34 test nuthan@nuthan-desktop:~$

  Read the article

• Play the Microsoft Game “Are You Certifiable?”

  - by Mysticgeek

  Want to know if you have what it takes to be certified by Microsoft? Today we check out an enjoyable way to practice and test your IT knowledge of Microsoft products.  There are two modes, one where you log in with your Live account so you can save your progress, and play additional levels.   If you log in with your Live account, it’s obvious that Microsoft wants to sell you some certification courses, so just be aware of that. Or Guest Play where you can only play one episode and scores are not saved.   Playing the Game We’ll take a look at the Guest Play just so you get a sense of what the game is about. Enter in a username and pick an avatar… Then read the instructions…we won’t go over them all here, there are a lot of options and points are scored by correct answers, amount of time it takes to answer them, you get vouchers to play a question before answers are shown…etc. Once you start playing, you get certification questions, you can take as much time to read the question as you want, then hit the Answer button when you’re ready. Now you have four answers to choose from…notice the time clicking down, so you want to try to answer as quickly as possible. After selecting the answer, you’re told if it is correct or not, then given an answer explaination, along with your score. You can flag the topic so it comes up again, which is a good way to get repetition of various topics, which really helps when taking the cert tests. If you get an answer wrong, you still get an answer explanation which is cool, so you can learn and better understand the topic. Conclusion This game is definitely not for everyone, only those who are curious or want a fun way to practice for Microsoft certifications. If you are interested in a cert from Microsoft, it’s a fun way to practice up. Play Are You Certifiable? Similar Articles Productive Geek Tips Geek Fun: Play Alien Arena the Free FPS GameFriday Fun: Get Your Mario OnFriday Fun: Play Bubble QuodFriday Fun: 13 Days in HellFriday Fun: Open Doors TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3

  Read the article

• Fail to start windows after Ubuntu 11.10 install

  - by user49995

  Computer: HP Pavilion dv7-6140eo OS: Originally Win7 I recently decided to try out Ubuntu, and I decided to dual-boot it with Windows 7. First I googled some how-to's, then I downloaded Ubuntu onto a memory stick and made a second partition (I originally only had one partition that I shrunk and used the unallocated space to install onto during the Ubuntu install). During the install I set format type to xt4 (or something, it was the default option), chose the "in the beginning" option and set the last option as "\". The install was successful. Although, when I restarted my computer I weren't able to choose which operating system to start; it went right into windows. After showing the windows logo for half a second before rebooting, I get a blue screen (see bottom of the page). Trying to fix it, I deleted the newly made partition I had just installed Ubuntu onto (seeing it wasn't working either). This made no difference. I proceeded with installing Ubuntu again, so I would at least have a functioning computer, and now Ubuntu works fine (on it now). The only difference on start-up is that I get a Grub window asking me to between several options including Linux and Windows 7 (loader). Now, if I choose Windows 7, I get the message "Windows was unable to start. A recent software or hardware change might be the cause". It recommends me to choose the first option of the two it provides; to start start-up repair tool. The second option being starting windows normally. If I start windows normally, the same thing happens as earlier. My computer does not have a windows installation CD. Although, it has (at least it used to, if I haven't screwed that too up) a 17gb recovery partition. In addition I made an image of the computer onto a external hard drive when I first got it. Though, I have no idea how to use either. If anyone has any idea how I can make windows work again or reinstall it (already backed up my files) it would be greatly appreciated. I still prefer to dual boot between the two functioning operating systems, but I will settle for a functioning windows 7. Thanks a lot for any replies. Blue screen: A problem has been detected and Windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check for viruses on your computer. Remove and newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configures and terminated. Run CMKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: **STOP: 0x0000007B (0xFFFFF880009A97E8,0xFFFFFFFFC0000034, 0x0000000000000000,0x0000000000000000

  Read the article

• My father wants to learn PHP-MySQL to port his application. What I should do to help?

  - by adijiwa

  My father is a doctor/physician. About 15 years ago he started writing an application to handle his patient's medical records in his clinic at home. The app has the ability to input patient's medical records (obviously), search patients by some criteria, manage medicine stocks, output receipt to printer, and some more CRUDs. He wrote it in dBase III+. A few years later he migrated to FoxPro 2.6 for DOS and finally in a few more years he rewrote his app in Visual FoxPro 9. And now (actually two years ago) he wants to rewrite it in PHP, but he don't know how. The Visual FoxPro version of this app is still running and has no serious problem except sometimes it performs slowly. Usually there are 1-5 concurrent users. The binary and database files are shared via windows share. He did all the coding as a hobby and for free (it is for his own clinic after all). He also use this app in two other offices he managed. Some reasons of why he wants to rewrite in PHP-MySQL: He wants to learn Easier to deploy (?) Easier client setup, need only a browser What should I do to help my father? How should he start? I explored some options: I let my father learn PHP and MySQL (and HTML (and JavaScript?)) from scratch. I create/bundle framework. I'm thinking on bundling CodeIgniter and a web UI framework (any suggestion?) especially to reduce effort on writing presentation codes. What do you think? tl;dr My father (a doctor) wants to rewrite his Visual FoxPro app in PHP-MySQL. He knows very little of PHP and MySQL but he wants to learn. What should I do to help? How should he start? Some facts: My father is 50 years old. His first encounter with a PC is in early 1980s. It was IBM PC with Intel 8088. He knows BASIC. He taught me how to use DOS and how to program with BASIC. The other language he knows fairly well is dBase/FoxPro. I got my bachelor CS degree last year. I know the internals of my father's app because sometime he wants me to help him writing his app. Sorry for my english.

  Read the article

• Moved to SSD and now getting "the disk drive for / is not ready yet"

  - by dmt0

  I moved my Ubuntu 12.04 install over to an SSD drive. Copied all directories except for the ones most often written to - var, tmp, ... Reinstalled grub into SSD by booting with live CD and following the commands in this post: How to move Ubuntu to an SSD This seemed to work fine, because when I press "e" in grub menu, I see the expected UUIDs. But right after grub I get could not log bootup: Address already in use the disk drive for / is not ready yet or not present. If I skip, I get same for /tmp /run, and other dirs If I go into manual recovery and do mount -n -o remount,rw / it turns out that everything can mount no problem. Can't get my head around this one. My fstab seems right. grub is right. AHCI in bios is enabled. Why is this happening? What can I do to fix it? When I do drop into shell from this error and get to mount things manually, how do I get the OS to continue loading? Thank you guys for any ideas you can give me. Here's what my fstab looks like right now: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 UUID=67fc8a7a-f1db-485c-88bd-e007c214244f / ext4 defaults,noatime,discard 0 1 # swap was on /dev/sda3 during installation UUID=6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6 none swap sw 0 0 UUID=7397729b-2125-4b1d-b5eb-28866898d773 /hdd ext4 errors=remount-ro 0 1 /hdd/home /home none bind 0 0 /hdd/run /run none bind 0 0 /hdd/tmp /tmp none bind 0 0 /hdd/var /var none bind 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 output from blkid: /dev/sda1: LABEL="System Reserved" UUID="EABC56C1BC568849" TYPE="ntfs" /dev/sda2: UUID="7CCC6124CC60D9C2" TYPE="ntfs" /dev/sda3: UUID="6bc9cd6c-46b7-43a0-bfac-bd04cc26cfb6" TYPE="swap" /dev/sda5: UUID="7397729b-2125-4b1d-b5eb-28866898d773" TYPE="ext4" /dev/sdb1: UUID="67fc8a7a-f1db-485c-88bd-e007c214244f" TYPE="ext4" relevant from fdisk -l: Device Boot Start End Blocks Id System /dev/sdb1 2048 115345407 57671680 83 Linux

  Read the article

• Eloqua Sales Awareness Training for Partners - London, November 28-29

  - by Richard Lefebvre

  We are pleased to invite you to the free of charge Oracle Eloqua Sales Awareness Training for Partners - London, November 28&29 - COME LEARN WHAT ALL THE BUZZ IS ABOUT! WHEN SALES & MARKETING BOND, REVENUE GROWS It’s not one thing that makes a company successful with marketing automation – it’s the combination of the best implementation, flexible long-term support and access to a community of marketing innovation that ensures you have the assistance you need every step of the way. Our customers choose Oracle|Eloqua because they know when sales and marketing work together, leads are called upon, quotas are crushed and revenues climb. Learn how Oracle|Eloqua can help you put marketing to work for you! COVERED IN THIS TRAINING Eloqua and the Customer Experience Strategy How Modern Marketing Works Introduction to Eloqua – Whiteboard POV Go To Market Playbook Competitive Landscape Integration Options Service Offerings With case studies, workshops and product demos to help you on your way to a new world of marketing expertise LOGISTICS If you are ready to join us on this journey, now’s the time to let us know! Tell us a little about your experience – complete this form to help us know you better (Please ignore if your firm has already completed) Complete this form to RSVP by Thursday, November 21, 2013. Find out more about the Oracle|Eloqua, join the Oracle Eloqua Marketing Cloud Service Knowledge Zone and keep up on all the news! QUESTIONS? Contact [email protected] Please note that similar events will take place in other cities (Brussels, Istanbul and more come) later in 2014. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• OOF checklist

  - by Daniel Moth

  When going on vacation or otherwise being out of office (known as OOF in Microsoft), it is polite and professional that our absence creates the minimum disruption possible to the rest of the business, and especially our colleagues. Below is my OOF checklist - I try to do these as soon as I know I'll be OOF, rather than leave it for the night before. Let the relevant folks on the team know the planned dates of absence and check if anybody was expecting something from you during that timeframe. Reset expectations with them, and as applicable try to find another owner for individual activities that cannot wait. Go through your calendar for the OOF period and decline every meeting occurrence so the owner of the meeting knows that you won't be attending (similar to my post about responding to invites). If it is your meeting cancel it so that people don’t turn up without the meeting organizer being there. Do this even for meetings were the folks should know due to step #1. Over-communicating is a good thing here and keeps calendars all around up to date. Enter your OOF dates in whatever tool your company uses. Typically that is the notification to your manager. In your Outlook calendar, create a local Appointment (don't invite anyone) for the date range (All day event) setting the "Show As" dropdown to "Out of Office". This way, people won’t try to schedule meetings with you on that day. If you use Lync, set the status to "Off Work" for that period. If you won't be responding to email (which when on your vacation you definitely shouldn't) then in Outlook setup "Automatic Replies (Out of Office)" for that period. This way people won’t think you are rude when not replying to their emails. In your OOF message point to an alias (ideally of many people) as a fallback for urgent queries. If you want to proactively notify individuals of your OOFage then schedule and send a multi-day meeting request for the entire period. Remember to set the "Show As" to "Free" (so their calendar doesn’t show busy/oof to others), set the "Reminder" to "None" (so they don’t get a reminder about it), set "Low Importance", and uncheck both "Response Options" so if they don't want this on their calendar, it is just one click for them to get rid of it. Aside: I have another post with advice on sending invites. If you care about people who would not observe the above but could drop by your office, stick a physical OOF note at your office door or chair/monitor or desk. Have I missed any? Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Validate if aTextBox Value Start with a Specific Letter

  - by Vincent Maverick Durano

  In case you will be working on a page that needs to validate the first character of the TextBox entered by a user then here are two options that you can use: Option 1: Using an array   1: <asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server"> 2: <script type="text/javascript"> 3: function CheckFirstChar(o) { 4: var arr = ['A', 'B', 'C', 'D']; 5: if (o.value.length > 0) { 6: for (var i = 0; i < arr.length; i++) { 7: if (o.value.charAt(0) == arr[i]) { 8: alert('Valid'); 9: return true; 10: } 11: else { 12: alert('InValid'); 13: return false; 14: } 15: } 16: } 17: } 18: </script> 19: </asp:Content> 20: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 21: <asp:TextBox ID="TextBox1" runat="server" onblur="return CheckFirstChar(this);"></asp:TextBox> 22: </asp:Content>   The example above uses an array of string for storing the list of  characters that a TextBox value should start with. We then iterate to the array and compare the first character of TextBox value to see if it matches any characters from the array. Option 2: Using Regular Expression (Preferred way)   1: <asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server"> 2: <script type="text/javascript"> 3: function CheckFirstChar(o) { 4: pattern = /^(A|B|C|D)/; 5: if (!pattern.test(o.value)) { 6: alert('InValid'); 7: return false; 8: } else { 9: alert('Valid'); 10: return true; 11: } 12: } 13: </script> 14: </asp:Content> 15: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 16: <asp:TextBox ID="TextBox1" runat="server" onblur="return CheckFirstChar(this);"></asp:TextBox> 17: </asp:Content>   The example above uses regular expression with the pattern  /^(A|B|C|D)/. This will check if the TextBox value starts with A,B,C or D. Please note that it's case sensitive. If you want to allow lower case then you can alter the patter to this /^(A|B|C|D)/i. The i in the last part will cause a case-insensitive search.   That's it! I hope someone find this post useful!

  Read the article

• Brocken package manager due to incorrect Banshee package

  - by user54974

  Sup, so, I'm not familiar with linux at all so help is much appreciated. I've been trying to boot my pc up from a live CD unsuccessfully. I get to the stage at which there are the options to test without installing or install or so on where I select 'Install Ubuntu.' Here it relays through some fast DOS commands until it reaches 'end trace' and then, eventually, 'Killed.' I have already got a functional 11.10 version installed, could this be a problem? The reason I am attempting a reinstall is because the package system is damaged inside 11.10, a problem I can't seem to solve. If I try to install any new software from within the software centre it tells me that two banshee extensions must be removed. I try to remove these from inside the terminal, using apt-get remove, which results in:** You might want to run apt-get -f install to correct these: The following packages have unmet dependencies. banshee-extension-ubuntuonemusicstore : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). The software centre suggests that I disable all third party repositories and run apt-get install -f I have done so but the package system remains damaged and apt-get install -fattempts to install banshee 2.2.1 but returns: Errors were encountered while processing: /var/cache/apt/archives/banshee_2.2.1-1ubuntu3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I have also tried apt-get update (runs fine) and apt-get upgrade. The upgrade command apt-get upgrade results in: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. banshee-extension-soundmenu : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is installed banshee-extension-ubuntuonemusicstore : Depends: banshee (>= 2.2.1) but 2.2.0-1ubuntu2 is installed E: Unmet dependencies. Try using -f. I seem to be going round and round in circles here! If only I could reinstall successfully. Only proposed updates (oneiric proposed) is not enabled.

  Read the article

• Block-level deduplicating filesystem

  - by James Haigh

  I'm looking for a deduplicating copy-on-write filesystem solution for general user data such as /home and backups of it. It should use online/inline/synchronous deduplication at the block-level using secure hashing (for negligible chance of collisions) such as SHA256 or TTH. Duplicate blocks need not even touch the disk. The idea is that I should be able to just copy /home/<user> to an external HDD with the same such filesystem to do a backup. Simple. No messing around with incremental backups where corruption to any of the snapshots will nearly always break all later snapshots, and no need to use a specific tool to delete or 'checkout' a snapshot. Everything should simply be done from the file browser without worry. Can you imagine how easy this would be? I'd never have to think twice about backing-up again! I don't mind a performance hit, reliability is the main concern. Although, with specific implementations of cp, mv and scp, and a file browser plugin, these operations would be very fast, especially when there is a lot of duplication as they would only need to transfer the absent blocks. Accidentally using conventional copy tools that do not integrate with the FS would merely take longer, waste some bandwidth when copying remotely and waste some CPU, as the duplicate data would be re-read, re-transferred and re-hashed (although nothing would be re-written), but would absolutely not corrupt anything. (Some filesharing software may also be able to benefit by integrating with the FS.) So what's the best way of doing this? I've looked at some options: lessfs - Looks unmaintained. Any good? [Opendedup/SDFS][3] - Java? Could I use this on Android?! What does [SDFS][4] stand for? [Btrfs][5] - Some patches floating around on mailing list archives, but no real support. [ZFS][6] - Hopefully they'll one day relicense under a true Free/Opensource GPL-compatible licence. Also, 2 years ago I had a go at an attempt in Python using Fuse at the file-level to be used over the top of a typical solid FS such as EXT4, but I found Fuse for Python underdocumented and didn't manage to implement all of the system calls. My first post here, so I can't post more than 2 links until I get over 10 rep: [3]: http://www.opendedup.org/ [4]: https://en.wikipedia.org/w/index.php?title=SDFS&action=edit&redlink=1 [5]: https://en.wikipedia.org/wiki/Btrfs#Features [6]: https://en.wikipedia.org/wiki/ZFS#Linux

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by Torben Gundtofte-Bruun

  My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

  Read the article

• Modelling highly specific business requirements

  - by AndyBursh

  How can one go about modelling highly specific business requirements, which have no precedent in the system? Take for example the following requirement: When a purchase order contains N lines, is over X value in total and is being recorded against project Y, an email needs to be sent to persons A and B with the details This requirement supplements other requirements surrounding purchase orders, but comes in at a much later date in response to some ongoing problem elsewhere in the business. Persons A and B are not part of any role or group in the system, and don't hold any specific responsibility; they are simply the two people the business has appointed to receive these emails in this very specific case. Projects are also data driven, so project Y has no special properties to distinguish it from any other project. The only way to identify it is to compare its identifier to a magic number. How can one go about modelling this kind of case without introducing too much additional complexity? That I can think of right now, there are a couple of options. Perform the checks and actions inline with the existing code. Here we find the correct spot in the code, check the conditions in the requirement and send the emails to hardcoded addresses. Of course this is fraught with issues. At the very least it stops working if one of these people leaves or changes their email address. At worst you have to ensure that any tests and test data are aware that additional actions are taken for a specific set of criteria. Introduce some form of events system. Here we introduce an eventing system, so that we might react to some event, and fulfil the requirement outside of the usual path of execution. This sounds like a cleaner solution than option 1, but the work involved is ultimately probably slightly overkill for this one small requirement. That said, having it in place does allow the system to handle these kinds of specific requirements consistently and easily in the future. Are there any other (good/better) ways of handling highly specific requirements? I mean other than telling the other parts of the business no!

  Read the article

• New Features Of WordPress 3.3 You Must Know

  - by Gopinath

  After months of beta testing, WordPress 3.3 version is going to be released at the end of this month. There are several new features packed in the new version and few of them are going to excite WordPress admins. In this post we are going to discuss about the exciting new features. 1. Drag and Drop Media Uploads One of the biggest improvements in this version of WordPress is it’s all new media uploader. Now you can upload multiple files by just dragging & dropping, instantly resize  the images and filter files by their type. The media upload sports a brand new look WordPress adopted the Pupload plugin to power its media uploader component and it’s written by the same team who created the popular TinyMCE editor plugin. 2. Improved Admin Bar(Toolbar) The admin bar or newly called toolbar has got handful of makeovers. The not so much used items like Search box and other elements are removed to make sure that the bar is not clumsy. The user menu and the related options are moved to the right like how we see in Google’s user bar. Also there are few changes to the colour of the bar to make it more eye friendly. 3. Fly out Admin Menus All the left side bar menus of WordPress admin are now sports a fly out menu style to save a click. In the previous versions if you want to access a sub menu on the left side bar, you need to first click on the category and then choose the menu item from the expanded list. Now on just mouse over you will see a flyout of menu items. 4. Adaptive Admin – Layout Auto Adjust To Fit Various Devices If you own an iPad or any other so called tablets then you are going to love this feature. The admin site of WordPress has got a lot more friendly with tablets and smartphones. WordPress now auto adjusts layout to fit the device through which you are accessing the admin site.  Accessing admin dashboard on your tablets is going to be more fun. 5. Other Features Now that we have read the most useful 4 features here is a small list of other features that may interest you Nice Tooltips are displayed where ever possible to help the newbies to understand the usage of admin site Responsive Layouts jQuery 1.7 and jQuery UI 1.8.16 are the power horses of WordPress Performance improvements This article titled,New Features Of WordPress 3.3 You Must Know, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• I didn't mean to become a database developer, but now I am. Should I stop or try to get better?

  - by pretlow majette

  20 years ago I couldn't afford even a cheap POS program when I opened my first surf shop in the Virgin Islands. I bought a copy of Paradox (remember that?) in 1990 and spent months in a back room scratching out a POS application. Over many iterations, including a switch to Access (2000)/SQL Server (2003), I built a POS and backoffice solution that runs four stores with multiple cash registers, a warehouse and office. Until recently, all my stores were connected to the same LAN (in a small shopping center) and performance wasn't an issue. Now that we've opened a location in the States that's changed. Connecting to my local server via the internet has slowed that locations application to a crawl. This is partly due to the slow and crappy dsl service we have in the Virgin Islands, and partly due to my less-than-professional code and sql. With other far-away stores in the works, I need a better solution. I like my application. My staff knows it well, and I'm not inclined to take on the expense of a proper commercial solution. So where does that leave me? I should probably host my sql online to sidestep the slow dsl here. I think I can handle cleaning up my SQL querries to speed that up a bit. What about Access? My version seems so old, but I don't like the newer versions with the 'ribbon'. There are so many options... Should I be learning Visual Studio with an eye on moving completely to the web? Will my VBA skills help me at all there? I don't have the luxury of a year at the keyboard to figure it out anymore. What about dotnetnuke, sharepoint, or lightswitch? They all seem like possibilities, but even understanding their capabilities is daunting. I'm pretty deep into it, but maybe I should bail and hire a consultant or programmer. That sounds expensive tho, and there's no guarantee there either... Any advice would be greatly appreciated. Or, if anybody is interested in buying a small chain of surf shops...

  Read the article

• Nvidia driver overscan issue second monitor via dvi-d cable

  - by benmichael

  Ok, I know that I have a bit of a bizarre setup, but here goes. I have an old laptop, HP Pavilion 6000. The graphics card in there is a GeForce 7150M. The monitor connection is an old 18pin. The external monitor I use is a Samsung SyncMaster 2333. Don't ask me why, but this monitor only has a dvi-d connection (yes, i have searched it). So I have the monitor plugged into the laptop. If I use any of the Nvidia propriety drivers and try to set the resolution up to 1920x1080 (the monitor's native resolution), I get a massive overscan issue. Over the years I have tried to get this to work, tinkering with my xorg.conf to death. I have also tried this on every Ubuntu since 10.04, on all the corresponding LUbuntus, and on all the Linux Mints since Lisa. Exact same issue. I have even tried it in WinDoze and it works perfectly there (although I did get the error once, but was unable to reproduce it). Using the Open Source drivers it works perfectly iff I switch off the laptop monitor (this makes no difference with the Nvidia drivers). I would have happily gone on using the Open Source drivers, except that since upgrading to LUbuntu 12.10, the Open Source drivers make my monitor completely hazy and have the same overscan issue until I (through the haze, only because I know where things are) go to the monitor settings, activate the laptop's monitor, then deactivate it, and suddenly it comes right. I have to do this every time. So I have to find a way to fix one of them, so I may as well tackle the propriety drivers, hence this overlong question. Amidst other things, I have tried the nvidia-settings, but because it is connected to an 18pin, it detects the monitor as a vga monitor and does not give me overscan correction options. I have tried custom modlines (although there are always more of those try), I have tried using xrandr, and I have tried all the FlatPanelOptions. What I have not tried is a Gentoo build, as I don't have time any more to do that installation, but up to about three years ago when I ran Gentoo exclusively I did not have this issue. Below is an link to an image with a red highlight around the portion of the screen visible to me, the numbers around it are the number of pixels which are cut off. This does seem to drift a few pixels every now and then. Thanks in advance. Nvidia driver issue image

  Read the article

• Defining a service layer: the text-based adventure

  - by Stacy Vicknair

  Applications these days have more options than ever for a user interface, and it’s only going to grow. A successful product might require native applications for mobile devices, a regular web implementation, or even a gaming console. These systems often will be centralized and data driven. The solution is one that’s fairly solitary, a service layer! Simply put, take what’s shared and put it behind a physical or abstract layer that defines the boundary between the specific user interface and the shared content.   I know, I know, none of this is complicated. But some times it can be difficult to discern what belongs on which side of the line. For instance, say we’re creating a service that will provide content for both an ASP.NET MVC application and a WP7 application. Although the content served to each application is the same, there are different paradigms and patterns for displaying that data in the different environments. In ASP.NET MVC, you may create a model specific to a page that combines necessary information. In the WP7 application you might require different sets of data that you will connect via MVVM with the view. The general rule of thumb is that any shared content, business rules, or data should exist separately. Any element that is specific to the current UI implementation should be included in a separate library or with the UI implementation itself. The WP7 application doesn’t need my MVC specific model classes. My MVC application doesn’t require those INotifyPropertyChanged viewmodels that the WP7 application depends on. In both cases, there should be additional processing done above the service layer to massage the data to the application’s specific needs.   Service-ocalypse: the text based adventure What helps me the most about deciding whether or not something belongs coupled to the UI implementation or in the shared implementation is thinking of the simplest implementation you could have: a console application. You might have played a game like Peasant’s Quest: The console app is the text based adventure game version of your application. If you’re service was consumed in its simplest form, you would simply have a console based API for it that issues requests. Maybe those requests aren’t SWIM TO BOAT, but they might be CREATE USER JOHN. If I issue a request, I expect that request to be issued to the service. If the service has any exceptions or issues with my input, that business logic should be encapsulated in that service, not implemented in the UI. The service layer should be your functional application in its entirety, and anything above that layer should only assist with the display of that information.

  Read the article

< Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >