Search Results

Search found 9122 results on 365 pages for 'chris card'.

Page 56/365 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • How to get sound on macbook pro 4,1

    - by Thomas
    I have just installed Xubuntu 12.04.2. My soundcard is detected: thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Everything is put to max in alsamixer and nothing is muted (all the sliders are on OO. My speakers do not work, but when I plug in a headphone I hear it very soft. When I connect my stereo and put the sound VERY loud (3-blocks-of-complaining-neighbours loud) I hear it on a normal level but crackling. I added options snd-hda-intel model=mbp5 amixer set IEC958 off to at the end of /etc/modprobe.d/alsa-base.conf. When it's still not working I tried everything here: https://help.ubuntu.com/community/SoundTroubleshooting 1 >>> list-sinks 1 sink(s) available. * index: 0 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 100% 1: 100% 0: 0.00 dB 1: 0.00 dB balance 0.00 base volume: 100% 0.00 dB volume steps: 65537 muted: no current latency: 0.00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0.00 ms; range is 0.50 .. 371.52 ms card: 0 <alsa_card.pci-0000_00_1b.0> module: 4 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC889A Analog" alsa.id = "ALC889A Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0x9b500000 irq 46" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.name = "82801H (ICH8 Family) HD Audio Controller" device.form_factor = "internal" device.string = "front:0" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Realtek ALC889A" alsa.components = "HDA:10ec0885,106b3a00,00100103" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output-speaker: Speakers (priority 10000, available: unknown) properties: analog-output-headphones: Headphones (priority 9000, available: no) properties: active port: <analog-output-speaker> 2 and 3: Doesn't seem an permission issue, the sound is very far away (See opening paragraph). 4 thomas@thomas-pc:~$ sudo aplay -l **** List of PLAYBACK Hardware Devices **** Home directory /home/thomas not ours. card 0: Intel [HDA Intel], device 0: ALC889A Analog [ALC889A Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC889A Digital [ALC889A Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 5 thomas@thomas-pc:~$ find /lib/modules/`uname -r` | grep snd /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-48-generic/kernel/sound/core/snd-pcm.ko [.. huge lists continues ..] /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-48-generic/kernel/sound/pcmcia/vx/snd-vxpocket.ko thomas@thomas-pc:~$ 6 thomas@thomas-pc:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Apple Inc. Device 00a4 Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at 9b500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 7 I guess it's supported. Linux mint and Xubuntu 13.04 had no trouble with sounds. Everything worked out of the box Thanks in advance Edit: alsa-info.sh output: WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' ALSA Information Script v 0.4.62 -------------------------------- This script visits the following commands/files to collect diagnostic information about your ALSA installation and sound related hardware. dmesg lspci lsmod aplay amixer alsactl /proc/asound/ /sys/class/sound/ ~/.asoundrc (etc.) See './alsa-info.sh --help' for command line options. WARNING: /etc/modprobe.d/alsa-base.conf line 45: ignoring bad line starting with 'amixer' Automatically upload ALSA information to www.alsa-project.org? [y/N] : y Uploading information to www.alsa-project.org ... Done! Your ALSA information is located at http://www.alsa-project.org/db/?f=6cffc584284d4c0b266eb53249824ef83d6c4e3e Please inform the person helping you. thomas@thomas-pc:~$

    Read the article

  • Show #14 DotNetNuke 5.6.1, Razor/Webmatrix and WebCamps

    - by Chris Hammond
    Once again, it’s been far too long since the last show, this time just over 4 months, For Show #14 I am joined by Joe Brinkman. Take a listen and see what has been going on in the DNN world. Length: 47:56 Size: 43.8mb MP3 Download Welcome back to DNNVoice Welcome to guest Joe Brinkman ( http://blog.theaccidentalgeek.com/ ) Introduction to Joe and Welcome back from Chris Hammond ( http://www.chrishammond.com ) and what he's been doing DotNetNuke Training Free Extensions Module Development Templates...(read more)

    Read the article

  • Computer starts, POSTs normal, no video

    - by Annath
    So, I recently tried to start up an old computer of mine. It would not power on, so I replaced the PSU. When I powered it on, all the fans spun up and the POST beeps indicated a normal startup. The problem was there was no video output. Every couple of minutes, I hear the post code again. I think it is restarting after POST, but without video I have no idea why. Does anyone have an idea as to why this is happening, and how to fix it? EDIT: The video card is a PCI-e card. There is no integrated graphics on the motherboard. If I remove the video card, the POST indicates a missing card. When I put it back, it goes back to normal, so I know that it recognizes that the card exists.

    Read the article

  • MIX 2010 recap podcast

    - by Chris Williams
    from www.slickthought.net: Spaghetti Code Podcast: Recapping the MIX Conference 4/2/2010 11:06:10 AM Spaghetti Code (Jeff Brand) is joined by Mike Hodnic, Jason Bock, Adam Grocholski and Chris Williams to share their thoughts and impressions from the Microsoft MIX Conference and their thoughts on Windows Phone, Silverlight 4, and more. Direct Download - click here Subscribe - click here iTunes - click here

    Read the article

  • Implementing custom "Remember Me" with Stripe

    - by Matt
    Implementing remember me with Stripe, while not using their Checkout (not supported on PhoneGap), seems to be fine using the path: First time: Request token on the client side using card info. Create customer on server side using token. Upon confirm, charge customer. Second time: Check if current user is Stripe customer by requesting the info from our server. If is Stripe customer, show "use credit card on file" instead of regular CC form. Upon confirm, charge customer. However, there is one important convenience items missing--last four digits of card number. Most sites inform you of the card you're using before making the payment, pretty important in case you have to switch out cards. I have seen that you can retrieve charges which would allow me to get the last four digits. Is it bad practice to pull that and display it? Are there alternative solutions anyone has in mind?

    Read the article

  • Long Running Service Request or COLD CASE?

    - by chris.warticki
    What's going on? Why is it taking so long? Is anyone out there? Resolving Service Requests can seem to take forever. If your Service Request is taking more than a few days, moving into weeks or months, here are few things to consider.  Details here.  Comments welcome. -Chris Warticki twittering @cwarticki Join one of the Twibes - http://twibes.com/OracleSupport or http://twibes.com/MyOracleSupport

    Read the article

  • Oracle Linux Friday Spotlight - October 18, 2013

    - by Chris Kawalek
    Happy Friday! Echoing our popular series over on the Oracle Virtualization blog, we'll now be spotlighting something interesting about Oracle Linux for you every Friday. This week, we have a really cool video done by Intel that features Oracle's Phillip Goerl discussing the Oracle Linux development model and how it relates to Intel Xeon. Click below to jump to YouTube and play the video: See you next week! -Chris 

    Read the article

  • ubuntu integrated graphics suspend + hybrid graphics

    - by kapad
    My laptop uses a hybrid graphics hardware. Using the vgaswitcheroo I am able to power off either card and switch between them correctly. The issue is that the system wakes up/resumes from suspend correctly only when using the discrete graphics, or atleast the discrete graphics must be powered on even if the display is connected to the onboard intel card. Has anyone faced this issues? Is there any workaround? I only want to use the integrated card and not the discrete amd card. System Info Intel HD 3000 ATI mobility radeon HD 7600M Ubuntu 12.10

    Read the article

  • How to manage two video cards on a laptop that runs Ubuntu 10.10?

    - by Marc-François Cochaux-Laberge
    I have a laptop with two video cards. One ATI and on integrated Intel. On Windows, I can choose which video card I want to use. For example, I use the Intel card for normal use and for gaming, I switch to my ATI card for better performance, but a shorter battery life. In Ubuntu 10.10, only the Intel driver is installed, the ATI driver for my card doesn't work at all and there's heat coming out of my computer all the time, like when I'm playing video games on Windows. I think both cards are active, but only the Intel one is usefull. How can I solve this by making sure Ubuntu is aware of the two video cards and by disabling my ATI. Or may be I am all wrong about this?

    Read the article

  • No BIOS, no video after ubuntu updates

    - by chubbysilk
    Hello, I am running Ubuntu 10.04 on a Dell Precision T3500 Desktop machine. Last week, when I ran the regular updates, upon restart my video disappeared. I could not even see the Dell startup screen or enter the BIOS. When I swapped out the video card (for an older one I had around), the system worked again. So Dell sent me a replacement video card. I put that in and everything appeared to be working again. Then, I ran updates again, and the same thing happened. Replacement video card appears to be broken. No startup messages, no BIOS, no video at all. Does anyone know how Ubuntu updates might be ruining the video cards? The card that keeps "breaking" is an FirePro MV2260. Thanks, RC

    Read the article

  • The Apple Passbook

    - by David Dorf
    In a previous job I worked on smart card systems.  Our vision was to replace the physical wallet with a chip card that contained stored value, credit cards, and loyalty cards.  The technology was up to the task, but the business model never worked out.  When all those things go onto a single card, who owns the card and maintains the applications?  Each bank wanted their own card with branding, so instead of consolidating lots of cards onto one, we ended up with the same number of cards, just more expensive chip cards.  The Costanza wallet would not die. More recently I've been able to move lots of these cards into iOS apps using products like CardStar, TripIt, and Fandango.  I guess moving from physical to digital is progress, but still no consolidation.  But this week Apple announced its Passbook, an iOS feature that consolidates boarding passes, loyalty cards, and movie tickets.  Another step in the right direction. We've been waiting for Apple to announce a NFC solution to take advantage of the 400 million credit cards it stores in iTunes for its customers.  Perhaps Passbook is the first step in that direction.  It wouldn't take much to add credit cards to Passbook, then enable secure transfer of the track data using a NFC equipped iPhone.  I've got to think this has to be part of the larger vision, but of course Apple is very secretive. I think the steps will be loyalty, coupons, and then payment when it comes to the evolving Passbook.  Retailers should keep an eye on Apple, and expect these things to happen in the Apple stores first.

    Read the article

  • Why does Ubuntu only detect one USB LAN adapters at a time?

    - by EGO
    I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

    Read the article

  • Comparison between these video cards?

    - by seedeg
    Currently I have a GeForce 8600GT as a video card. I started playing EVE online and it is not that smooth (Apart from the fact that my Windows 7 is starting to become slow so it needs a format). Now I have these 3 video cards on my mind: 1GB Gainward GF GT240 PCI-Express Video Card 1GB Gainward GF9800GT PCI-Express Video Card 1GB Gainward GF GT240-GS PCI-Express Video Card I tried comparing them from nvidia's site: HelpMeChoose but the GT240-GS is not available for comparison. However, when I tried comparing the GT240 with the 9800GT, the latter was the winner. You must keep in consideration that the cheapest one is the GT2400. The 9800GT is in the middle, and the one which is not available for comparison, the GT240-GS is the most expensive one (about 6 euros more than the 9800GT). Is the GT240-GS the best video card from these? Thanks in advance for your responses.

    Read the article

  • Memory Glutton

    - by AreYouSerious
    I have to admit that I can't get enough storage. I have hard drives just sitting around in case I need to move somthing, or I'm going to a friends and either they want something I have or I want something they might have. What I'm going to talk about today is cost effective memory for devices. I don't know how this particualr device will work in a camera, as That's not what I use in my camera, in fact I don't have a camera that doesn't either use SD, or the old compact flash card, that's not so compact anymore. There's this thing that uses two micro sd cards to double the capacity of your memory, and it costs about 4 bucks, without the Micro SD card. I have had one for about a year and was going to throw it away because I couldn't get it to work with my computer, or with my Sony Reader. However I found out by one last ditch effort that this thing works beautifully with my Sony PSP. there is no software to speak of associated with this thing, you simply put in two SD cards of the same size... (if you put in two different sizes it will still work, you'll only double the smallest cards size though) and format through the psp. Viola you know have a 29 GB memory card for your PSP. why is this important ? well for starters you can carry more music and more videos. Second if you have gone the way of the hacker.... you can store more games on your card... There are just a few things you have to note.... I speak from experience... you have to use the usb connection to the PSP to do any file moving, as I said previously said card doesn't play well with my computers or card readers... I not saying it won't work at all, just hasn't work with anything I own. Second. If for some reason you try to Hack/crack your PSP don't attempt to delete a game from the psp, use the usb file browser to remove games. if you delete from the PSP you are likely to have to move all your files off, reformat and start again... just a couple things I have noticed... if I had done something like that.   anyway, Here's a link.... http://www.photofast-adapter.com/  and if you want to buy one, get it off ebay, I've seen them as low as $1.99

    Read the article

  • Linux PCIE Physical Bus Address

    - by Without me Its just Aweso
    I am working on designing a custom PCIexpress card. I am trying to write a kernel module that will DMA my custom card. Right now when i plug the card into linux no valid PCI device shows up (meaning I probably have a error on my end, i know) however, If I halt the system at startup in the bootloader (uboot) I am able to directly access the card as I know in uboot the physical memory address that is mapped to my device. Is there a way I can access the card in a simliar fashion in linux? Thanks, Stephanie

    Read the article

  • No sound from internal speaker but headphones OK

    - by Aris Boch
    The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • 12.04 LTS boot hangs at "SP5100 TCO timer: mmio address 0xfec000f0 already in use", didn't yesterday

    - by DarkIron112
    Dual-booting Windows 7 and Ubuntu 12.04 LTS. I went to reboot from Win to Ubu, and found a few interesting things. My POST screen is covered in blocks of epileptic colors until I hit GRUB, which continues when I try to boot into Ubuntu. These color blocks don't appear when I use my on-board VGA, so I'll just attribute to that. Grub dimensions are swapped (card vs onboard, probably), but, when interfacing with onboard VGA, the Grub Timeout Counter works and when using my card, it does not (see "[!!!]" below for more information) Booting into Ubuntu directly causes the error: SP5100 TCO timer: mmio address 0xfec000f0 already in use Booting into recovery mode, meanwhile, and then "resuming normal boot" gets me to the desktop without native 1440x900 resolution and graphic drivers can't tell the monitor it's looking at (I assume this is because it's not a full graphic boot, and as it says, some drivers won't run?) [!!!] When I reboot after going into recovery mode, the countdown timer works ONCE, puts me back into default ubuntu boot, and then does not work again until after another recovery-mode boot. Windows 7 can boot perfectly with no issues whatsoever from epilepsy color blocks or driver detection. This makes me wonder /why/ the POST screen can't handle my video card anymore. Amidst all the diagnostics, I opened my case and re-seated the videocard securely, ensuring it wasn't a loose connection-- But this did nothing to help me. Hardware I am running an NVidia GeForce GTX 8800 video card in a PCI slot. I have 4.8GiB memory, an AMD Athlon II Quad-core 640 Processor, on an MSI K9N6GM Series Mobo. Onboard video is an NVidia GeForce MCP61(V/S/P) card. Note: I did not have any of these problems yesterday, and I have been using Ubuntu intensively for a week, though it's been working flawlessly for months. I've recently been using it to mod my Android phone, perhaps I messed something up in the file system?

    Read the article

  • ralink rt2860 not working anymore in ubuntu 12.10

    - by greenit
    I just upgraded from Ubuntu 12.04 to 12.10, however, my network card is not working anymore... When i had 12.04 installed, i just had to download the driver from Ralink, go to the directory and enter these commands: $ make $ sudo make install and the network card worked... now, when I want to do this in ubuntu 12.10, it seems like it works, but it doesn't. I can enable the module, it recognizes the network card, but i am unable to connect to any wireless network... How can i get my wireless card working again? If any1 knows a solution, please tell it to me, thx in advance

    Read the article

  • how to enable opengl 2.0 and webgl on gma 3150 ?

    - by mahmoudelbadry
    hi, i have a dell mini 1012 which has an intel n450 processor and gma 3150 integrated graphics card running ubuntu 10.10 according to the intel website the graphics card support opengl 2.0 http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/#9 but when i type glxinfo in terminal the opengl version string gives me the following OpenGL version string: 1.4 Mesa 7.9-devel i installed the latest drivers but it didn't work. so, how can i enable opengl 2.0 on this card?? thanks

    Read the article

  • Can I get the Waves Maxx speaker effects to work in Ubuntu?

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Cheap sound on speakers - Dell XPS L502X

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • sound stopped working after upgrade to 11.10 on Tuesday 20th March

    - by Hugh Barney
    My sound card stopped working after a set of updates were installed 2 days ago. The sound card is detected, the volume is not muted and the speakers work, I can make the speakers hum if I touch the jack plug lead that normally plugs into the card. hugh@lindisfarne:~$ lspci -v | grep -A7 -i "audio" 07:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster Subsystem: Creative Labs SB0570 [SB Audigy SE] Flags: bus master, medium devsel, latency 32, IRQ 16 I/O ports at c000 [size=32] Capabilities: Kernel driver in use: CA0106 Kernel modules: snd-ca0106 I've tried reverting those upgraded packages that look like the could impact the kernal - but to no avail. alsamixer does not have anything muted, I've been though all the sound card debug/troubleshooting pages I can find. Kernal driver is attached. So whats gone pop ? I will boot from CD to check - but I am pretty sure this is a sw and not a hw problem.

    Read the article

  • Ubuntu cant load sound cart

    - by Reza Marefaty
    I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

    Read the article

  • Oracle Linux Friday Spotlight - November 1, 2013

    - by Chris Kawalek
    Happy Friday! I hope you were able to catch our webcast "Why Choose Oracle Linux for your Oracle Database 12c Deployments" earlier this week so you could ask questions of our experts in real-time. But if you didn't, or want to share the content with your colleagues, the on-demand version is our Friday Spotlight this week. Watch now: Why Choose Oracle Linux for your Oracle Database 12c Deployments We'll see you next week! -Chris

    Read the article

  • How to manage two video cards on a laptop (ATI and Intel)?

    - by Marc-François Cochaux-Laberge
    I have a laptop with two video cards. One ATI and on integrated Intel. On Windows, I can choose which video card I want to use. For example, I use the Intel card for normal use and for gaming, I switch to my ATI card for better performance, but a shorter battery life. In Ubuntu 10.10, only the Intel driver is installed, the ATI driver for my card doesn't work at all and there's heat coming out of my computer all the time, like when I'm playing video games on Windows. I think both cards are active, but only the Intel one is usefull. How can I solve this by making sure Ubuntu is aware of the two video cards and by disabling my ATI. Or may be I am all wrong about this?

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >