Search Results

Search found 9122 results on 365 pages for 'chris card'.

Page 58/365 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

  • vyatta Server Reboots by itself

    - by Fernando
    I have an issue regarding some hardware, maybe you can help me. First, I set up a Supermicro Superserver SYS-5016I-NTF with a Intel Xeon X3470 and 4 GB of Ram with a Hotlava Card Tambora 64G4 with Intel Chipset 82599EB and 4x10G SPF+ ports. Installed Vyatta community edition 6.3. I used it as router making BGP connections with 2 operators. No load at all, temp ranges normal. But the issue is that it reboots by itself in a ramdom way. Not very often, once every few days. But it is unacceptable for production purposes. So I try to test on different hardware, and installed Vyatta community edition 6.3 on a Dell PowerEdge 2950, with Xeon(R) E5345 @ 2.33GHz and 4 GB of Ram. Same Vyatta configuration as Supermicro Server. With same hotlava Card model ( I bought two of them ) Well I have reboots with this equipment as well. Same frecuency as above. I have checked syslog no strange logs until boot process starts to be logged. So it seems server reboot suddenly. I have installed latest driver for the chipset of the Hotlava card. Servers are placed in a datacenter with UPS So finally two things in common in both servers: Hotlava Card. Someone with issues with this card, or the chipset?? Could be it this card?? Vyatta 6.3 community edition. I don't thing is the problem. Is a regular Debian with packages to glue together different services. Or maybe is something I am missing. Andy ideas, suggestions?? Thank you very much... Fernando

    Read the article

  • Weird PCI bug: lots of missed packets, or data comes in "bursts"

    - by Thomas O
    I have an ABIT KN9 motherboard. It has one PCI-e x16 slot, three PCI-e x4 slots and two legacy PCI. My problem is with the legacy PCI (which I shall just call "PCI".) I currently have an Nvidia GeForce 8600 GT (a low end card) installed in the x16 slot and a TV card in PCI #1; the x4 slots are unused, as is PCI #2. I plan to upgrade the graphics card soon, the current card was spare. I sometimes install a USB expander in PCI #2 but it causes a lot of problems - see below. The problem is under Linux (Ubuntu 10.10, Linux 2.6.35-22-generic), but probably under all operating systems (I have not yet been able to test Windows, but I suspect it will do the same as the problems occur on the BIOS/POST side too, e.g. when using a USB keyboard on the expander the keyboard will not work at all) PCI has an enourmous delay, and packets arrive in large chunks. For example, when using the USB expander, my USB mouse lags and jumps in large steps every second or so, while using the motherboard USB does not present this problem. My TV card will only do one or two frames per second, and the program (xawtv) usually times out and crashes. In dmesg, I'm getting messages like: bttv0: timeout: drop=74, irq=154/100476, risc=31f6256c, bits: VSYNC HSYNC OFLOW RISCI for my TV card, and similar timeout issues for my USB expander with a mouse. I received the motherboard, processor and RAM second hand and have only just got around to building it, so I don't know if this problem has always existed, or if it's a result of my set up. If anyone has any hints or solutions it would be appreciated - this is kind of a show-stopper for me.

    Read the article

  • Which upgrade path for disk IO bound postgres server?

    - by user41679
    Hi all, We currently have a Sun x4270 with 2xquad core Xeon Nehalmen 2.93ghz cores (16 threads), 72 gig of ram and 16 x 10k SAS disks split between the os raid 1, a partition for the Write Ahead Logs which is raid 10 and a partition for the database tables and indexes which is also raid 10, all xfs. I'm currently evaluating which path to go down in terms of upgrades. We'll be sharding the DB at some point soon, but for now I need to focus on hardware upgrades specifically. The machine is not CPU or memory bound at all at the moment, just IOWait is become an issue. The machine is mostly write access as we have a heavy caching layer. We're seeing about 300 write IOPS average on both the database partitions. We don't have any additional storage infrastructure like a Fiber Channel or ISCSI network. Budget isn't too much of a concern, something inline with the size of this server (i.e no $1m IBM machines) Space is ok on the DB side of things, we're running out obviously but there's also some reduction we can do. Additional space would be good though. My current thoughts are either: * ISCSI SAN, possible with 10Gbit network that has solid state acceleration. * FusionIO card / Sun F20 card (will the FusionIO card work in the Sun box? * DAS shelf (something like this http://www.broadberry.co.uk/das-direct-attached-storage-servers/cyberstore-224s-das) which a combination of 15k sas disks and some Intel X25-E drives for DB indexes etc) what would I need to put in the x4270 to add a DAS shelf? I think it's a SAS HBA card, do I have to use Sun's own card or will any PCI Express card work? Anything else??? what would you guys do from your experience? I appreciate it's a lot of questions, but I haven't expanded a DB machine for a number of years and the landscape has changed dramatically since then! Any advice or feedback would be very much appreciated. Let me know if there's anything else I can clarify. Thanks in advance!

    Read the article

  • Wake-on-lan only works so many times

    - by Chance
    I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

    Read the article

  • Wireless keeps shutting off in Windows 7

    - by Nathan Adams
    I have Windows 7 Ultimate 32bit installed on a Dell Latitude XT Tablet and for the life of me I can't figure out this really weird problem. The symptom is that the Wireless will disconnect from the AP and if I tell it to scan again, it says there are no APs in the area. I do have another wireless card in the laptop and if I disable the first one and enable the second, I am able to get onto the wireless however if I want to use the first card again I have to restart. I tried enabling/disabling the device, nothing will kick start the wireless again in the first card without a restart. I even tried different drivers. So, it seems it is random but it does occur more often when there is increased network activity (ie downloading a large file). The laptop doesn't seem to be overheating. I have tried the following: Under "Change Advanced Power Settings" for the current power profile, I set the "Wireless Adapter settings" to "Maximum Performance". Under device manger, I went to the card in question, and went to the advanced tab and set the "Power Saving mode" to "MAX_PSP" Both cards I have seem to exhibit the behavior after awhile. Both models of those cards are: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Gigabyte GN-WS30N 802.11n mini WLAN Card Has anyone have any ideas or ran into this before?

    Read the article

  • Posting xml from classic asp to asp.net

    - by Chris Dunaway
    I apologize if this has been asked before. I searched and didn't find anything that matched my situation. Also bear in mind I am fairly new to asp/asp.net development. My current project is a relatively simple e-commerce site. The customer will connect to the site, select products, input shipping and billing information, payment information (credit card) and submit the order. The project is being split into two parts: The store front which includes displaying the items and taking the customer's shipping and billing information and the payment site which will collect the customers credit card, compute tax, and save the order into the company's system. The reason that the site was split up, was that our side (payment side) already has facilities for credit card handling and tax computation. There may also be some regulatory issues that the store front side does not want to deal with (which we already do). I'm working on the payment portion of the app and I am using asp.net. The store front side is being written in classic asp (not my decision). Each part will be hosted on different servers. The problem I am having is transferring the contents of the "shopping cart" to our app so that we can collect the cc info and submit the order. We had thought that the classic asp could somehow post an xml fragment which contains the billing/shipping info and the items selected. Our side would display a summary of the order, securely collect the credit card info, and submit the order to our system. But I have been unable to post or send the xml from a classic asp on one server, to our asp.net application on another. It all works just fine when I test on the same server. How can I post (or otherwise transfer) the shopping cart data from classic asp to asp.net across server boundaries and transfer control to the asp.net application? As I said, I am new to web development, so this is proving quite a challenge for me. Thanks

    Read the article

  • Run-time error'9' subscript out of range

    - by Chris
    The error occurs when I rename the file. I need to be able to the macro automatically recognise the change in the file name and apply it to the macro. Is there any way to do this without having to manually change it each time which will no work for what I need this to do Sub OccurenceSort() ' ' OccurenceSort Macro ' Macro recorded 4/9/2010 by Chris Greenlee ' ' Keyboard Shortcut: Ctrl+o ' Sheets("Occurences").Select Range("A1:D58").Select Range("D58").Activate Selection.Sort Key1:=Range("B2"), Order1:=xlDescending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom Sheets("Chart").Select ActiveSheet.ChartObjects("Chart 1").Activate ActiveChart.PlotArea.Select ActiveChart.ChartArea.Select ActiveChart.SeriesCollection(1).Values = "=Occurences!R2C2:R12C2" End Sub Sub OccurenceByValue() ' ' OccurenceByValue Macro ' Macro recorded 4/9/2010 by Chris Greenlee ' ' Keyboard Shortcut: Ctrl+v ' ActiveWindow.Visible = False Windows("QA Project - Automated Charts v1.1.xls").Activate Sheets("Occurences").Select Range("A1:D58").Select Range("D58").Activate Selection.Sort Key1:=Range("C2"), Order1:=xlDescending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom Sheets("Chart").Select ActiveSheet.ChartObjects("Chart 1").Activate ActiveChart.SeriesCollection(1).Values = "=Occurences!R2C3:R12C3" End Sub Sub OccurencesByPercentIncreaseToScore() ' ' OccurencesByPercentIncreaseToScore Macro ' Macro recorded 4/9/2010 by Chris Greenlee ' ' Keyboard Shortcut: Ctrl+p ' ActiveWindow.Visible = False Windows("QA Project - Automated Charts v1.1.xls").Activate Sheets("Occurences").Select Range("A1:D58").Select Range("D58").Activate Selection.Sort Key1:=Range("D2"), Order1:=xlDescending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom Sheets("Chart").Select ActiveSheet.ChartObjects("Chart 1").Activate ActiveChart.SeriesCollection(1).Values = "=Occurences!R2C4:R12C4" End Sub The problem occurs with this line Windows("QA Project - Automated Charts v1.1.xls").Activate

    Read the article

  • Help finding longest non-repeating path through connected nodes - Python

    - by Jordan Magnuson
    I've been working on this for a couple of days now without success. Basically, I have a bunch of nodes arranged in a 2D matrix. Every node has four neighbors, except for the nodes on the sides and corners of the matrix, which have 3 and 2 neighbors, respectively. Imagine a bunch of square cards laid out side by side in a rectangular area--the project is actually simulating a sort of card/board game. Each node may or may not be connected to the nodes around it. Each node has a function (get_connections()), that returns the nodes immediately around it that it is connected to (so anywhere from 0 to 4 nodes are returned). Each node also has an "index" property, that contains it's position on the board matrix (eg '1, 4' - row 1, col 4). What I am trying to do is find the longest non-repeating path of connected nodes given a particular "start" node. I've uploaded a couple of images that should give a good idea of what I'm trying to do: In both images, the highlighted red cards are supposedly the longest path of connected cards containing the most upper-left card. However, you can see in both images that a couple of cards that should be in the path have been left out (Romania and Maldova in the first image, Greece and Turkey in the second) Here's the recursive function that I am using currently to find the longest path, given a starting node/card: def get_longest_trip(self, board, processed_connections = list(), processed_countries = list()): #Append this country to the processed countries list, #so we don't re-double over it processed_countries.append(self) possible_trips = dict() if self.get_connections(board): for i, card in enumerate(self.get_connections(board)): if card not in processed_countries: processed_connections.append((self, card)) possible_trips[i] = card.get_longest_trip(board, processed_connections, processed_countries) if possible_trips: longest_trip = [] for i, trip in possible_trips.iteritems(): trip_length = len(trip) if trip_length > len(longest_trip): longest_trip = trip longest_trip.append(self) return longest_trip else: print card_list = [] card_list.append(self) return card_list else: #If no connections from start_card, just return the start card #as the longest trip card_list = [] card_list.append(board.start_card) return card_list The problem here has to do with the processed_countries list: if you look at my first screenshot, you can see that what has happened is that when Ukraine came around, it looked at its two possible choices for longest path (Maldova-Romania, or Turkey, Bulgaria), saw that they were both equal, and chose one indiscriminantly. Now when Hungary comes around, it can't attempt to make a path through Romania (where the longest path would actually be), because Romania has been added to the processed_countries list by Ukraine. Any help on this is EXTREMELY appreciated. If you can find me a solution to this, recursive or not, I'd be happy to donate some $$ to you. I've uploaded my full source code (Python 2.6, Pygame 1.9 required) to: http://www.necessarygames.com/junk/planes_trains.zip The relevant code is in src/main.py, which is all set to run.

    Read the article

  • C++ enum in foreach

    - by Spencer
    I've have a card class for a blackjack game with the following enums: enum Rank { Ace, Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten, Jack, Queen, King }; enum Suit { Clubs, Diamonds, Hearts, Spades }; When I create the deck I want to write the code like this: // foreach Suit in Card::Suit // foreach Rank in Card::Rank // add new card(rank, suit) to deck I believe there is no foreach in c++. However, how do I traverse an enum? Thanks, Spencer

    Read the article

  • What's the right way to display a DBIx::Class ResultSet in my Catalyst project that uses Template To

    - by Thelema
    Given a DBIx::Class resultset, for example: my $rs = $c->model("DB::Card")->search({family_name => "Smith"}); the tutorials I've read use the stash to pass an arrayref of rows: $c->stash->{cards} = [$rs->all]; This results in the query getting executed at this point, and the resulting objects stuffed into the stash, so they can be used in TemplateToolkit as: [% FOREACH card IN cards %] [% card.given_name %] [% card.family_name %] [%END%] Is there a proper way to have TT iterate over the rows as they get fetched from the DB?

    Read the article

  • Initialize a Variable Again.

    - by SoulBeaver
    That may sound a little confusing. Basically, I have a function CCard newCard() { /* Used to store the string variables intermittantly */ std::stringstream ssPIN, ssBN; int picker1, picker2; int pin, bankNum; /* Choose 5 random variables, store them in stream */ for( int loop = 0; loop < 5; ++loop ) { picker1 = rand() % 8 + 1; picker2 = rand() % 8 + 1; ssPIN << picker1; ssBN << picker2; } /* Convert them */ ssPIN >> pin; ssBN >> bankNum; CCard card( pin, bankNum ); return card; } that creates a new CCard variable and returns it to the caller CCard card = newCard(); My teacher advised me that doing this is a violation of OOP principles and has to be put in the class. He told me to use this method as a constructor. Which I did: CCard::CCard() { m_Sperre = false; m_Guthaben = rand() % 1000; /* Work */ /* Convert them */ ssPIN >> m_Geheimzahl; ssBN >> m_Nummer; } All variables with m_ are member variables. However, the constructor works when I initialize the card normally CCard card(); at the start of the program. However, I also have a function, that is supposed to create a new card and return it to the user, this function is now broken. The original command: card = newCard(); isn't available anymore, and card = new CCard(); doesn't work. What other options do I have? I have a feeling using the constructor won't work, and that I probably should just create a class method newCard, but I want to see if it is somehow at all possible to do it the way the teacher wanted. This is creating a lot of headaches for me. I told the teacher that this is a stupid idea and not everything has to be classed in OOP. He has since told me that Java or C# don't allow code outside of classes, which sounds a little incredible. Not sure that you can do this in C++, especially when templated functions exist, or generic algorithms. Is it true that this would be bad code for OOP in C++ if I didn't force it into a class?

    Read the article

  • Easy Regex question

    - by Aaron
    Trying to replace the first 12 digits of credit card numbers with X's in a predictable blob of text that contains the string: Credit Card Number: 1234123412341234 Here's my PHP function: preg_replace('/Credit Card Number: ([0-9]{12})/','Credit Card Number: XXXXXXXXXXXX',$str); Help?

    Read the article

  • Problem installing Cardbus/PCMCIA drivers (USB 2.0 2-port)

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Device Manager - does USB listing look right?

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Problem with USB drivers (Windows-XP)

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

    - by mattalexx
    I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

    Read the article

  • Unclaimed user group prizes, Live meeting on Monday, Next weeks UG, SQLRelay and more prizes

    - by Testas
      Hi Everyone Firstly I want to let you know that I finally found the LINQ book prize winners and the list of people at the bottom of this email are owed a LINQ book. This will be given out at next week’s UG meeting Live meeting with Carolyn Chau, Program Manager at Microsoft on Monday! It is very rare that we get the opportunity to have a Live meeting with a Program Manager in Redmond. Carolyn Chau will be presenting PowerView next Monday at 8pm. Live meeting details can be found on http://sqlserverfaq.com/events/388/Live-Meeting-on-SQL-Server-2012-PowerView-with-Carolyn-Chau-Principal-Program-Manager-in-the-Reporting-Services-in-association-with-SQLPASS-SQLServerFAQ-and-SQLBits.aspx Next week’s UG!! We welcome Mark Broadbent to Manchester next week where he will be presenting his session on SQL Server 2012 on Windows Core. We also hand out the unclaimed prizes. Register at http://sqlserverfaq.com/events/369/Thursday-night-meeting-at-BSS-with-Chris-TestaONeill-and-Mark-Broadbent.aspx Chris Webb is in Manchester!!! Chris Webb will be speaking at the Manchester SQL Server UG on 4th July. He will also be running his Real World Cube Design and Performance Tuning with Analysis Services between the 3rd – 5th July. If you want to attend then you can sign up at the link below http://www.technitrain.com/coursedetail.php?c=13&trackingcode=FAQ SQLRelay and a Special Prize and Jamie Thomson comes to Manchester!!!! SQLRelay takes place in Manchester on the 22nd. We have a special guest, after years of asking Jamie Thomson is coming to Manchester. The SSIS Junkie will be gracing us with his presence with a talk on SSIS 2012. Also we have a prize. Know a friend or colleague who would benefit from SQLRelay? Get them to register at www.sqlserverfaq.com and then register for the event http://sqlserverfaq.com/events/373/ALL-DAY-TUESDAY-EVENT-12-hours-of-SQL-Server-2012-at-the-SQLRelay-meeting-at-the-COOP-Manchester.aspx Then send an email to [email protected] with the subject of SQLFriend with the name of your friend. If you are both at the SQLRelay event on the day and your names are pulled out of the hat you will win a PASS 2011 DVD and your friend will win the “Best of PASS DVD 2011” worth  $1000 courtesy of SQLPASS. The draw will take place between 4.30pm – 5pm on the day. SQLBits feedback!!!!! Attended SQLBits? We really need to know your opinion. Please fill out the survey for the days you attended If you attended any of the days at SQLBits please can you all fill out the following survey http://www.sqlbits.com/SQLBitsX If you attended the Thursday Training day then please fill out the following survey: http://www.sqlbits.com/SQLBitsXThursday If you attended the Friday Deep Dives day then please fill out the following survey: http://www.sqlbits.com/SQLBitsXFriday If you attended the Saturday Community day then please fill out the following survey: http://www.sqlbits.com/SQLBitsXSaturday Thanks   Chris and Martin   LINQ BOOK winners Andrew Birds Chris Kennedy Dave Carpenter David Forrester Ian Ringrose James Cullen James Simpson Kevan Riley Kirsty Hunter Martin Bell Martin Croft Michael Docherty Naga Anand Ram Mangipudi Neal Atkinson Nick Colebourn Pavel Nefyodov Ralph Baines Rick Hibbert saad saleh Simon Enion Stan Venn Steve Powell Stuart Quinn

    Read the article

  • How do you educate your teammates without seeming condescending or superior?

    - by Dan Tao
    I work with three other guys; I'll call them Adam, Brian, and Chris. Adam and Brian are bright guys. Give them a problem; they will figure out a way to solve it. When it comes to OOP, though, they know very little about it and aren't particularly interested in learning. Pure procedural code is their MO. Chris, on the other hand, is an OOP guy all the way -- and a cocky, condescending one at that. He is constantly criticizing the work Adam and Brian do and talking to me as if I must share his disdain for the two of them. When I say that Adam and Brian aren't interested in learning about OOP, I suspect Chris is the primary reason. This hasn't bothered me too much for the most part, but there have been times when, looking at some code Adam or Brian wrote, it has pained me to think about how a problem could have been solved so simply using inheritance or some other OOP concept instead of the unmaintainable mess of 1,000 lines of code that ended up being written instead. And now that the company is starting a rather ambitious new project, with Adam assigned to the task of getting the core functionality in place, I fear the result. Really, I just want to help these guys out. But I know that if I come across as just another holier-than-thou developer like Chris, it's going to be massively counterproductive. I've considered: Team code reviews -- everybody reviews everybody's code. This way no one person is really in a position to look down on anyone else; besides, I know I could learn plenty from the other members on the team as well. But this would be time-consuming, and with such a small team, I have trouble picturing it gaining much traction as a team practice. Periodic e-mails to the team -- this would entail me sending out an e-mail every now and then discussing some concept that, based on my observation, at least one team member would benefit from learning about. The downside to this approach is I do think it could easily make me come across as a self-appointed expert. Keeping a blog -- I already do this, actually; but so far my blog has been more about esoteric little programming tidbits than straightforward practical advice. And anyway, I suspect it would get old pretty fast if I were constantly telling my coworkers, "Hey guys, remember to check out my new blog post!" This question doesn't need to be specifically about OOP or any particular programming paradigm or technology. I just want to know: how have you found success in teaching new concepts to your coworkers without seeming like a condescending know-it-all? It's pretty clear to me there isn't going to be a sure-fire answer, but any helpful advice (including methods that have worked as well as those that have proved ineffective or even backfired) would be greatly appreciated. UPDATE: I am not the Team Lead on this team. Chris is. UPDATE 2: Made community wiki to accord with the general sentiment of the community (fancy that).

    Read the article

  • What is a Delphi version of the C++ header for the DVP7010B video card DLL?

    - by grzegorz1
    I need help with converting c++ header file to delphi. I spent several days on this problem without success. Below is the original header file and my Delphi translation. C++ header #if _MSC_VER > 1000 #pragma once #endif // _MSC_VER > 1000 #ifdef DVP7010BDLL_EXPORTS #define DVP7010BDLL_API __declspec(dllexport) #else #define DVP7010BDLL_API __declspec(dllimport) #endif #define MAXBOARDS 4 #define MAXDEVS 4 #define ID_NEW_FRAME 37810 #define ID_MUX0_NEW_FRAME 37800 #define ID_MUX1_NEW_FRAME 37801 #define ID_MUX2_NEW_FRAME 37802 #define ID_MUX3_NEW_FRAME 37803 typedef enum { SUCCEEDED = 1, FAILED = 0, SDKINITFAILED = -1, PARAMERROR = -2, NODEVICES = -3, NOSAMPLE = -4, DEVICENUMERROR = -5, INPUTERROR = -6, // VERIFYHWERROR = -7 } Res; typedef enum tagAnalogVideoFormat { Video_None = 0x00000000, Video_NTSC_M = 0x00000001, Video_NTSC_M_J = 0x00000002, Video_PAL_B = 0x00000010, Video_PAL_M = 0x00000200, Video_PAL_N = 0x00000400, Video_SECAM_B = 0x00001000 } AnalogVideoFormat; typedef enum { SIZEFULLPAL=0, SIZED1, SIZEVGA, SIZEQVGA, SIZESUBQVGA } VideoSize; typedef enum { STOPPED = 1, RUNNING = 2, UNINITIALIZED = -1, UNKNOWNSTATE = -2 } CapState; class IDVP7010BDLL { public: int AdvDVP_CreateSDKInstence(void **pp); virtual int AdvDVP_InitSDK() PURE; virtual int AdvDVP_CloseSDK() PURE; virtual int AdvDVP_GetNoOfDevices(int *pNoOfDevs) PURE; virtual int AdvDVP_Start(int nDevNum, int SwitchingChans, HWND Main, HWND hwndPreview) PURE; virtual int AdvDVP_Stop(int nDevNum) PURE; virtual int AdvDVP_GetCapState(int nDevNum) PURE; virtual int AdvDVP_IsVideoPresent(int nDevNum, BOOL* VPresent) PURE; virtual int AdvDVP_GetCurFrameBuffer(int nDevNum, int VMux, long* bufSize, BYTE* buf) PURE; virtual int AdvDVP_SetNewFrameCallback(int nDevNum, int callback) PURE; virtual int AdvDVP_GetVideoFormat(int nDevNum, AnalogVideoFormat* vFormat) PURE; virtual int AdvDVP_SetVideoFormat(int nDevNum, AnalogVideoFormat vFormat) PURE; virtual int AdvDVP_GetFrameRate(int nDevNum, int *nFrameRate) PURE; virtual int AdvDVP_SetFrameRate(int nDevNum, int SwitchingChans, int nFrameRate) PURE; virtual int AdvDVP_GetResolution(int nDevNum, VideoSize *Size) PURE; virtual int AdvDVP_SetResolution(int nDevNum, VideoSize Size) PURE; virtual int AdvDVP_GetVideoInput(int nDevNum, int* input) PURE; virtual int AdvDVP_SetVideoInput(int nDevNum, int input) PURE; virtual int AdvDVP_GetBrightness(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetBrightness(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GetContrast(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetContrast(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GetHue(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetHue(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GetSaturation(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetSaturation(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GPIOGetData(int nDevNum, int DINum, BOOL* value) PURE; virtual int AdvDVP_GPIOSetData(int nDevNum, int DONum, BOOL value) PURE; }; Delphi unit IDVP7010BDLL_h; interface uses Windows, Messages, SysUtils, Classes; //{$if _MSC_VER > 1000} //pragma once //{$endif} // _MSC_VER > 1000 {$ifdef DVP7010BDLL_EXPORTS} //const DVP7010BDLL_API = __declspec(dllexport); {$else} //const DVP7010BDLL_API = __declspec(dllimport); {$endif} const MAXDEVS = 4; MAXMUXS = 4; ID_NEW_FRAME = 37810; ID_MUX0_NEW_FRAME = 37800; ID_MUX1_NEW_FRAME = 37801; ID_MUX2_NEW_FRAME = 37802; ID_MUX3_NEW_FRAME = 37803; // TRec SUCCEEDED = 1; FAILED = 0; SDKINITFAILED = -1; PARAMERROR = -2; NODEVICES = -3; NOSAMPLE = -4; DEVICENUMERROR = -5; INPUTERROR = -6; // TRec // TAnalogVideoFormat Video_None = $00000000; Video_NTSC_M = $00000001; Video_NTSC_M_J = $00000002; Video_PAL_B = $00000010; Video_PAL_M = $00000200; Video_PAL_N = $00000400; Video_SECAM_B = $00001000; // TAnalogVideoFormat // TCapState STOPPED = 1; RUNNING = 2; UNINITIALIZED = -1; UNKNOWNSTATE = -2; // TCapState type TCapState = Longint; TRes = Longint; TtagAnalogVideoFormat = DWORD; TAnalogVideoFormat = TtagAnalogVideoFormat; PAnalogVideoFormat = ^TAnalogVideoFormat; TVideoSize = ( SIZEFULLPAL, SIZED1, SIZEVGA, SIZEQVGA, SIZESUBQVGA); PVideoSize = ^TVideoSize; P_Pointer = ^Pointer; TIDVP7010BDLL = class function AdvDVP_CreateSDKInstence(pp: P_Pointer): integer; virtual; stdcall; abstract; function AdvDVP_InitSDK():Integer; virtual; stdcall; abstract; function AdvDVP_CloseSDK():Integer; virtual; stdcall; abstract; function AdvDVP_GetNoOfDevices(pNoOfDevs : PInteger) :Integer; virtual; stdcall; abstract; function AdvDVP_Start(nDevNum : Integer; SwitchingChans : Integer; Main : HWND; hwndPreview: HWND ) :Integer; virtual; stdcall; abstract; function AdvDVP_Stop(nDevNum : Integer ):Integer; virtual; stdcall; abstract; function AdvDVP_GetCapState(nDevNum : Integer ):Integer; virtual; stdcall; abstract; function AdvDVP_IsVideoPresent(nDevNum : Integer; VPresent : PBool) :Integer; virtual; stdcall; abstract; function AdvDVP_GetCurFrameBuffer(nDevNum : Integer; VMux : Integer; bufSize : PLongInt; buf : PByte) :Integer; virtual; stdcall; abstract; function AdvDVP_SetNewFrameCallback(nDevNum : Integer; callback : Integer ) :Integer; virtual; stdcall; abstract; function AdvDVP_GetVideoFormat(nDevNum : Integer; vFormat : PAnalogVideoFormat) :Integer; virtual; stdcall; abstract; function AdvDVP_SetVideoFormat(nDevNum : Integer; vFormat : TAnalogVideoFormat ) :Integer; virtual; stdcall; abstract; function AdvDVP_GetFrameRate(nDevNum : Integer; nFrameRate : Integer) :Integer; virtual; stdcall; abstract; function AdvDVP_SetFrameRate(nDevNum : Integer; SwitchingChans : Integer; nFrameRate : Integer) :Integer; virtual; stdcall; abstract; function AdvDVP_GetResolution(nDevNum : Integer; Size : PVideoSize) :Integer; virtual; stdcall; abstract; function AdvDVP_SetResolution(nDevNum : Integer; Size : TVideoSize ) :Integer; virtual; stdcall; abstract; function AdvDVP_GetVideoInput(nDevNum : Integer; input : PInteger) :Integer; virtual; stdcall; abstract; function AdvDVP_SetVideoInput(nDevNum : Integer; input : Integer) :Integer; virtual; stdcall; abstract; function AdvDVP_GetBrightness(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetBrightness(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GetContrast(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetContrast(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GetHue(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetHue(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GetSaturation(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetSaturation(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GPIOGetData(nDevNum : Integer; DINum:Integer; value : PBool) :Integer; virtual; stdcall; abstract; function AdvDVP_GPIOSetData(nDevNum : Integer; DONum:Integer; value : Boolean) :Integer; virtual; stdcall; abstract; end; function IDVP7010BDLL : TIDVP7010BDLL ; stdcall; implementation function IDVP7010BDLL; external 'DVP7010B.dll'; end.

    Read the article

  • Sql order by within a group by with aggregate

    - by NG
    Say I have Team/Name/Some number Cardinals Jason 8 Cardinals Chris 5 Yankees Joba 6 Cubs Carlos 6 Cardinals Chris 6 And I want Cardinals Jason 8 Cardinals Chris 11 Cubs Carlos 6 Yankees Joba 6 So, what I'm doing is grouping by team, grouping by name, summing by some number However, within cardinals I want to make sure the names are in a particular order. If I just do an "order by name desc" for example then the the whole grouping gets ignored. So how can I order within a group.

    Read the article

  • [Glade] button problem

    - by Christian
    Hi, i'm using glade to designa a interface for my program written in C but i have some problem with the buttons. Can someone explain me how to set in glade an action for a button? i mean, i wrote a function in my code but i don't know how to associate it to the graphic... i set i the Signal box the GtkButton activate and i chose "on_button_activate" and in "user data" i put the name of my function but when i copile it this is the terminal answare: chris@chris-laptop:~/Scrivania$ ./provaGrafica (provaGrafica:3139): Gtk-WARNING **: Could not lookup object funzione_esporta on signal activate of object button4 (provaGrafica:3139): Gtk-WARNING **: Could not find signal handler 'on_button4_activate' chris@chris-laptop:~/Scrivania$ and obviusly the button do not work thanks

    Read the article

  • memory available to 64bit Fedora guest under 32bit XP host running virtualbox

    - by Chris Card
    I have successfully installed a 64 bit Fedora 11 guest os using VirtualBox on a host machine (AMD64) running 32 bit Windows XP . At the moment the host machine has 2 Gb ram installed and I've allocated 1 Gb to the guest, which all works well. The host machine can hold a maximum of 4 Gb ram, so I was wondering if it's worth buying an extra 2 Gb for it. I know that 32 bit Windows XP can't use all of the 4 Gb, but can the guest os use any of the ram that the host os can't use?

    Read the article

  • Is JavaFx suitable for creating online multiplayer board/card games?

    - by Piniu
    In JavaFx i can easy create animations, moving pieces etc., but as far as i see there is better to write program logic and communication in java. Worst i see at the moment is calling javafx part as a result of data incoming from server. Is there any convenient way to do it or its better to change to other technology (flex, qt?) assuming it is not important if program will run in browser or outside as a standalone application? I just started to learn javafx but can drop it and move to other technology and consider c++ + wxWidgets or Qt which im more comforatable with.

    Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >