Search Results

Search found 1700 results on 68 pages for 'pixel shading'.

Page 56/68 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• When to call glEnable(GL_FRAMEBUFFER_SRGB)?

  - by Steven Lu

  I have a rendering system where I draw to an FBO with a multisampled renderbuffer, then blit it to another FBO with a texture in order to resolve the samples in order to read off the texture to perform post-processing shading while drawing to the backbuffer (FBO index 0). Now I'd like to get some correct sRGB output... The problem is the behavior of the program is rather inconsistent between when I run it on OS X and Windows and this also changes depending on the machine: On Windows with the Intel HD 3000 it will not apply the sRGB nonlinearity but on my other machine with a Nvidia GTX 670 it does. On the Intel HD 3000 in OS X it will also apply it. So this probably means that I'm not setting my GL_FRAMEBUFFER_SRGB enable state at the right points in the program. However I can't seem to find any tutorials that actually tell me when I ought to enable it, they only ever mention that it's dead easy and comes at no performance cost. I am currently not loading in any textures so I haven't had a need to deal with linearizing their colors yet. To force the program to not simply spit back out the linear color values, what I have tried is simply comment out my glDisable(GL_FRAMEBUFFER_SRGB) line, which effectively means this setting is enabled for the entire pipeline, and I actually redundantly force it back on every frame. I don't know if this is correct or not. It certainly does apply a nonlinearization to the colors but I can't tell if this is getting applied twice (which would be bad). It could apply the gamma as I render to my first FBO. It could do it when I blit the first FBO to the second FBO. Why not? I've gone so far as to take screen shots of my final frame and compare raw pixel color values to the colors I set them to in the program: I set the input color to RGB(1,2,3) and the output is RGB(13,22,28). That seems like quite a lot of color compression at the low end and leads me to question if the gamma is getting applied multiple times. I have just now gone through the sRGB equation and I can verify that the conversion seems to be only applied once as linear 1/255, 2/255, and 3/255 do indeed map to sRGB 13/255, 22/255, and 28/255 using the equation 1.055*C^(1/2.4)+0.055. Given that the expansion is so large for these low color values it really should be obvious if the sRGB color transform is getting applied more than once. So, I still haven't determined what the right thing to do is. does glEnable(GL_FRAMEBUFFER_SRGB) only apply to the final framebuffer values, in which case I can just set this during my GL init routine and forget about it hereafter?

  Read the article

• Monitor flickers in native resolution.

  - by ptikobj

  With my new Samsung Syncmaster BX2450 I have the following problem: In Windows XP (SP2), all resolutions above 1440x900 have either strange pixel errors or an extreme flickering. It seems, that the effect worsens for higher resolutions. In special, I would like to run the monitor with its native resolution (1920x1080), however I can't watch longer than 5 seconds on the monitor because of the flickering... My Graphics Card is a Geforce FX 5200 with the most up-to-date driver (according to Nvidia.com: Forceware 175.19) and I'm having the monitor connected to its DVI-output. The strange thing is, under Ubuntu 10.04, all resolutions work just perfect, so the display must be alright. edit: seems to be a driver problem... if I use the proprietary NVIDIA drivers in Ubuntu, I have the same problem as in Windows. I would like to reformulate my question: Is there a modified/alternative Geforce FX 5200 driver (as there is in Ubuntu) for Windows that allows me to use 1920x1020 without problems ? I already tried the omega drivers: unfortunately, it still looks poor on the native resolution.

  Read the article

• How do I lower the hardware volume? (volume too high)

  - by Zom-B

  I have a 4yo Dell laptop with Windows XP Pro (modern ones unfortunately don't have a physical volume knob), and lately I'm using my Apple earphones, because they have much better low frequency response than my $10 earphones. They also have the side effect of being much louder. To give an indication of my agony, for most tasks (movie, music, games) I have my main volume at 3 ticks: drag to 0 with the mouse and press the up key 3 times (the handle does not even raise 1 pixel) and my wave volume at 50%. I notice that when I do this, I have a lot of digital noise, because I'm using just a tiny fraction of the 16-bit space. If I drag the Wave slider down until I barely hear the audio, it becomes really distorted and noisy, indicating that this is digital volume (in the DirectSound driver or something) and not hardware volume. I experimented in Audition. When I make a tone of 1000Hz at -50db, (all windows volumes at max) the volume is just below my pain threshold. When I zoom in to see how high the sample values reach, I see that just 8 of the 16 bits are used (about -100 ~ 100). When I generate such tone at -80db (minimum I can specify) then I can still clearly hear the tone, although really noisy. When I zoom in, I see that just 3 out of 16 bits are used. I created a squarewave tone that is just 1 bit high, and I can still hear it! For most uses, this is not a big problem (audiophiles will disagree!), as I just have more noise than usual (about the same as old 8 bit hardware), but I'm also in the process of programming a hearing test program, in which case this problem is a death blow as the test subjects will even hear tones at the bottom of the theoretical range (lowering the windows volume is futile, see above) (I cannot update drivers, as Dell has discontinued XP support for my model)

  Read the article

• Is there any way to customize the Windows 7 taskbar auto-hide behavior? Delay activation? Timer?

  - by calbar

  I'm becoming increasingly frustrated with the way Windows 7 handles showing a hidden taskbar. It's incredibly over-eager to pop out and obscure what I'm really trying to interact with, requiring me to move the mouse away, wait for it to auto-hide again, then resume what I was doing but more deliberately. After closely examining the behavior, it appears that a hidden taskbar "peeks out" from the edge by 2 or 3 pixels, and slowly moving your mouse into this area activates it; you don't even need to touch the edge of the screen. I would love it if there was a way to customize or change this behavior. Ideally, the taskbar would only pop out if you are actively "pushing" the edge of the screen it is hidden on. So activation only occurs once you've reached the screens edge and continue to move the mouse past a customizable threshold. Alternatively, a simple activation delay would suffice as well. So only if the mouse remains in that 2-3 pixel area (a.k.a. on the taskbar) for greater than a customizable amount of time does it pop out again. This would only be a fraction of a second. Often times the cursor simply "careens" off the edge of the screen while trying to focus on something nearby. Anyway, if there are any registry settings or utilities that can achieve either of these effects, that would be great! Thanks for your help.

  Read the article

• Exchange 2010 UR3 - customizing OWA logon page

  - by STGdb

  I have an Exchange 2010 UR3 deployment that I need to customize the OWA logon page for. I've created a new LGNTOPL.GIF file to replace the existing one in the folder: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.158.1\themes\resources” When I bring up OWA, I still get the original “Outlook Web App” logo. I’ve searched and found a couple of other instances of LGNTOPL.GIF in the directories: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.123.3\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.146.0\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\Current\themes\resources” I’ve replaced the LGNTOPL.GIF file in each of the above directories but got the same results. I’ve tried clearing my browser cache and even using multiple browsers from multiple PC’s but the same results. I’ve even tried making my GIF file the same pixel size as the original LGNTOPL.GIF logo but still the same results. I’ve tried restarting IIS on the CAS server and restarting the server but same results. Has something changed with Exchange 2010 UR3 when trying to customize OWA? I don't see anything documented about any change to OWA customization. Thanks

  Read the article

• backbone.js - Having multiple instances of the same view

  - by TrueWheel

  I am having problems having multiple instances in of the same view in different div elements. When I try to initialize them only the second of the two elements appear no matter what order I put them in. Here is the code for my view. var BodyShapeView = Backbone.View.extend({ thingiview: null, scene: null, renderer: null, model: null, mouseX: 0, mouseY: 0, events:{ 'click button#front' : 'front', 'click button#diag' : 'diag', 'click button#in' : 'zoomIn', 'click button#out' : 'zoomOut', 'click button#on' : 'rotateOn', 'click button#off' : 'rotateOff', 'click button#wireframeOn' : 'wireOn', 'click button#wireframeOff' : 'wireOff', 'click button#distance' : 'dijkstra' }, initialize: function(name){ _.bindAll(this, 'render', 'animate'); scene = new THREE.Scene(); camera = new THREE.PerspectiveCamera( 15, 400 / 700, 1, 4000 ); camera.position.z = 3; scene.add( camera ); camera.position.y = -5; var ambient = new THREE.AmbientLight( 0x202020 ); scene.add( ambient ); var directionalLight = new THREE.DirectionalLight( 0xffffff, 0.75 ); directionalLight.position.set( 0, 0, 1 ); scene.add( directionalLight ); var pointLight = new THREE.PointLight( 0xffffff, 5, 29 ); pointLight.position.set( 0, -25, 10 ); scene.add( pointLight ); var loader = new THREE.OBJLoader(); loader.load( "img/originalMeanModel.obj", function ( object ) { object.children[0].geometry.computeFaceNormals(); var geometry = object.children[0].geometry; console.log(geometry); THREE.GeometryUtils.center(geometry); geometry.dynamic = true; var material = new THREE.MeshLambertMaterial({color: 0xffffff, shading: THREE.FlatShading, vertexColors: THREE.VertexColors }); mesh = new THREE.Mesh(geometry, material); model = mesh; // model = object; scene.add( model ); } ); // RENDERER renderer = new THREE.WebGLRenderer(); renderer.setSize( 400, 700 ); $(this.el).find('.obj').append( renderer.domElement ); this.animate(); }, Here is how I create the instances var morphableBody = new BodyShapeView({ el: $("#morphable-body") }); var bodyShapeView = new BodyShapeView({ el: $("#mean-body") }); Any help would be really appreciated. Thanks in advance.

  Read the article

• Exchange 2010 UR3 - customizing OWA logon page

  - by STGdb

  I have an Exchange 2010 UR3 deployment that I need to customize the OWA logon page for. I've created a new LGNTOPL.GIF file to replace the existing one in the folder: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.158.1\themes\resources” When I bring up OWA, I still get the original “Outlook Web App” logo. I’ve searched and found a couple of other instances of LGNTOPL.GIF in the directories: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.123.3\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.146.0\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\Current\themes\resources” I’ve replaced the LGNTOPL.GIF file in each of the above directories but got the same results. I’ve tried clearing my browser cache and even using multiple browsers from multiple PC’s but the same results. I’ve even tried making my GIF file the same pixel size as the original LGNTOPL.GIF logo but still the same results. I’ve tried restarting IIS on the CAS server and restarting the server but same results. Has something changed with Exchange 2010 UR3 when trying to customize OWA? I don't see anything documented about any change to OWA customization. Thanks

  Read the article

• Inspire Geek Love with These Hilarious Geek Valentines

  - by Eric Z Goodnight

  Want to send some Geek Love to that special someone? Why not do it with these elementary school throwback valentines, and win their heart this upcoming Valentine’s day—the geek way! Read on to see the simple method to make your own custom Valentines, as well as download a set of eleven ready-made ones any geek guy or gal should be delighted get. It’s amore! How to Make Custom Valentines A size we’ve used for all of our Valentines is a 3” x 4” at 150 dpi. This is fairly low resolution for print, but makes a great graphic to email. With your new image open, Navigate to Edit > Fill and fill your background layer with a rich, red color (or whatever appeals to you.) By setting “Use” to “Foreground color as shown above, you’ll paint whatever foreground color you have in your color picker. Press to select the text tool. Set a few text objects, using whatever fonts appeal to you. Pixel fonts, like this one, are freely downloadable, and we’ve already shared a great list of Valentines fonts. Copy an image from the internet if you’re confident your sweetie won’t mind a bit of fair use of copyrighted imagery. If they do mind, find yourself some great Creative Commons images. to do a free transform on your image, sizing it to whatever dimensions work best for your design. Right click your newly added image layer in your panel and Choose “Blending Effects” to pick a Layer Style. “Stroke” with this setting adds a black line around your image. Also turning on “Outer Glow” with this setting puts a dark black shadow around the top and bottom (and sides, although they are hidden). Add some more text. Double entendre is recommended. Click and hold down on the “Rectangle Tool” to get the “Custom Shape Tool.” The custom shape tool has useful vector shapes built into it. Find the “Shape” dropdown in the menu to find the heart image. Click and drag to create a vector heart shape in your image. Your layers panel is where you can change the color, if it happens to use the wrong one at first. Click the color swatch in your panel, highlighted in blue above. will transform your vector heart. You can also use it to rotate, if you like. Add some details, like this Power or Standby symbol, which can be found in symbol fonts, taken from images online, or drawn by hand. Your Valentine is now ready to be saved as a JPG or PNG and sent to the object of your affection! Keep reading to see a list of 11 downloadable How-To Geek Valentines, including this one and the three from the header image. Download The HTG Set of Valentines Download the HTG Geek Valentines (ZIP) Download the HTG Geek Valentines (ZIP) When he’s not wooing ladies with Valentines cards, you can email the author at [email protected] with your Photoshop and Graphics questions. Your questions may be featured in a future How-To Geek article! Latest Features How-To Geek ETC Inspire Geek Love with These Hilarious Geek Valentines How to Integrate Dropbox with Pages, Keynote, and Numbers on iPad RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin How to Kid Proof Your Computer’s Power and Reset Buttons Microsoft’s Windows Media Player Extension Adds H.264 Support Back to Google Chrome Android Notifier Pushes Android Notices to Your Desktop Dead Space 2 Theme for Chrome and Iron Carl Sagan and Halo Reach Mashup – We Humans are Capable of Greatness [Video] Battle the Necromorphs Once Again on Your Desktop with the Dead Space 2 Theme for Windows 7

  Read the article

• 5 reason why you should upgrade to new iPad (3rd generation)

  - by Gopinath

  Apple released the new iPad, 3rd generation, couple of days ago and they will be available in stores from March 16 onwards.  It’s the best tablet available in the market and for first time buyers it’s a no brainer to choose it. What about the iPad owners? Should they upgrade their iPad 2 to the new iPad? This is the question on the lips of most of the iPad owners. In this post we will provide you 5 reasons why you should upgrade your iPad, if more than two reasons are convincing then you should upgrade to the new iPad. Retina display – The best display ever made for mobile device, a game changer The new iPad comes with Retina display with screen resolution of 2048 x 1536, which is twice the resolution of iPad 2. Undoubtedly the iPad 3’s display is the best display ever made for a mobile device and it’s a game changer. With better resolution on iPad 3 eBook reading is going to be a pleasure with clear and crisp text Watching HD movies on iPad is going to be unbelievably good The new Games targeted for Retina display are going to be more realistic and needless to explain the pleasure of playing such games Graphic artists and photo editors get a professional on screen rendering support to create beautiful graphics 2x Faster & 2x Memory – Better Games and powerful Apps The new iPad is more powerful with 2x faster graphics and 2x more memory. Apple claims that the A5x processor of new iPad is 2x faster than iPad 2 and 4x faster than the best graphic chips available from other vendors. The RAM of  new iPad  is upgraded to 1 GB compared from 512 MB of iPad 2. With the fast processor and more memory, Apps and games are going to be blazing fast. 4G Internet – Browse the web at the speeds of 42 MB/sec Half of the iPad owners are frequent commuters who access internet over cellular networks, the new iPad’s 4G LTE is going to be a big boom for their  high data access needs. With the new iPad’s 4G LTE connectivity you can browse the web at 42 MB/sec and it mean you can watch a HD video without buffering issues. iPad 2 comes with 3G network support and it’s browsing speeds are way less than the new iPad. 5MP Camera – HD Movie Recording & gorgeous Photography iPad 2 has a 0.7 mega pixel camera and the new iPad comes with 5 megapixels camera. That is a huge boost for hobbyist  photographers and videographers. With the new iPad you can shoot gorgeous photos and 1080p HD video. The iSight camera of new iPad uses advanced optics with features like auto exposure, auto focus and face detection up to 10 faces. Amazon Pays up to $300 for old iPad 2 16 GB Wifi and more for other models Do you know that you can trade in your iPad 2 16 GB Wifi for upto $300? Amazon has an excellent trade in program for selling your used iPad 2s. Depending on the condition of the iPad 2  Amazon offers $234, $270, $300.00 for 16 GB Wifi versions that in Acceptable, Good and Like New conditions respectively.  The higher models of iPad 2s fetch you more money. With this great deal from Amazon the amount of extra money you need to spend for new iPad is almost half of their price. Visit Amazon Trade In’s website or read Amazon’s brilliant plan to pay you crazy money for your iPad 2 for more details. Related: New IPad Vs. IPad 2–Side By Side Comparison Of Hardware Specification [Infographic]

  Read the article

• XNA Notes 008

  - by George Clingerman

  This week has been a rough one. I’ve been sick and then in some kind of slump for my afternoon coding sessions. It could be from the cold, could be I’m still tired from writing that Windows Phone 7 game development book (which is out now!) or it could just be I’m tired of winter and want some sunshine. All I know is that even while I’m stick, the XNA world keeps going along at it’s whirlwind pace. Below are the things I caught in between my coughing fits.. Time Critical XNA News: The 2011 MVP summit is almost here so pass along your feelings and thoughts so the MVPs can take them and share them with the team in person http://forums.create.msdn.com/forums/p/76317/464136.aspx#464136 Dream Build Play - there’s no new announcement yet, but you can’t get much more to the end of February than this! http://www.dreambuildplay.com/Main/Home.aspx XNA Team: Dean Johnson from the XNA team shares an excellent way of handling Guide.IsTrialMode on WP7 http://blogs.msdn.com/b/dejohn/archive/2011/02/21/calling-guide-istrialmode-on-windows-phone-7.aspx Nick Gravelyn tries a new tactic in deciding if there’s enough interest to develop a sequel or not. Don’t YOU want Pixel Man 2 to come out? http://nickgravelyn.com/pixelman2/ XNA MVPs: Andy “The ZMan” Dunn finally shares what he’s been secretly working on these past 4 months http://twitter.com/#!/The_Zman/status/40590269392887808 http://www.youtube.com/watch?v=Rg8Z0ZdYbvg&feature=youtu.be Joel Martinez lets developers around NYC know they should by signing up for Game Hack Day http://twitter.com/joelmartinez/statuses/41118590862102528 http://gamehackday.org/71fdk XNA Developers: Michael McLaughlin shares an XNA RenderTarget2D Sample http://geekswithblogs.net/mikebmcl/archive/2011/02/18/xna-rendertarget2d-sample.aspx Martin Caine starts a new series on Deferred Rendering in XNA 4.0 http://twitter.com/#!/MartinCaine/status/39735221339291648 http://martincaine.com/xna/deferred_rendering_in_xna_4_introduction ElemenyCy posts about his fun time with the IntermediateSerializer http://www.ubergamermonkey.com/xna/holy-bloated-xml-batman/ Ben Kane releases a narrated dev diary video for Project Splice. Let him know if you’d like to see more! (I know I do!) http://twitter.com/#!/benkane/status/39846959498002432 http://www.youtube.com/watch?v=1EmziXZUo08&feature=youtu.be Jason Swearingen (of Novaleaf) posts his part 1 of Spatial Partitioning solutions http://altdevblogaday.org/2011/02/21/spatial-partitioning-part-1-survey-of-spatial-partitioning-solutions/ Brian Lawson of Dark Flow Studios shares what his been up to lately with lots of pretty screenshots and hints of announcements from Microsoft... http://www.darkflowstudios.com/entry/short-and-sweet-part-1 Luke Avery starts a new blog where he plans on making XNA tutorials for beginners (and he’s got a few started already!) http://programmingwithovery.wordpress.com/ Xbox LIVE Indie Games (XBLIG): GameMarx Episode 10 http://www.gamemarx.com/video/the-show/24/ep-10-february-18-2010.aspx Minecraft clone FortressCraft coming to XBLIG http://www.eurogamer.net/articles/2011-02-23-minecraft-clone-fortresscraft-hits-xblig ezMuze+ starts an IndieGoGo fundraiser campaign to help fund their second game and get it onto even more devices! http://www.indiegogo.com/ezmuze Gamergeddon XBLIG round up http://www.gamergeddon.com/2011/02/20/xbox-indie-game-round-up-february-20th/?utm_campaign=twitter&utm_medium=twitter&utm_source=twitter JForce Games loses their Ego http://jforcegames.com/blog/index.php?itemid=121&catid=4 XNA Game Development: @BallerIndustry reminds all XNA developers that the Maths are important ;) http://twitter.com/#!/BallerIndustry/status/39317618280243200 http://www.youtube.com/watch?v=MjV3XDFsjP4&feature=player_embedded#at=106 @suhinini stumbles on an older but extremely useful post on XNA Content Pipeline debugging http://twitter.com/#!/suhinini/status/39270189476352000 http://badcorporatelogo.wordpress.com/2010/10/31/xna-content-pipeline-debugging-4-0/ XNA Game Development Workshops at Singapore Universities http://innovativesingapore.com/2011/02/xna-game-development-workshops-at-singapore-universities/ Indiefreaks announces that IGF v0.3 is out with Xbox 360 support, SunBurn 2.0.12 and it’s now Open Source! http://twitter.com/#!/indiefreaks/status/39391953971982336 @liotral announces a new series on properly designing a game http://twitter.com/#!/liortal53/status/39466905081217024 http://liortalblog.wordpress.com/2011/02/20/hello-cosmos/ Indies and XNA at CodeStock 2011 http://www.gamemarx.com/news/2011/02/20/indies-and-xna-at-codestock-2011.aspx Train Frontier Express posts about XNA Content Hotloading http://trainfrontierexpress.blogspot.com/2011/02/xna-content-hotloading-overview.html Slyprid announces a new character editor in Transmute http://twitter.com/#!/slyprid/status/40146992818696192 http://www.youtube.com/watch?v=OKhFAc78LDs&feature=youtu.be The XNA 2D from the ground up tutorial series http://xna-uk.net/blogs/darkgenesis/archive/2011/02/23/recap-the-xna-2d-from-the-ground-up-tutorial-series.aspx Sgt.Conker posts a “Clingerman” (hey that’s me!) to stay relevant http://www.sgtconker.com/2011/02/posting-a-clingerman-to-stay-relevant/

  Read the article

• Rendering Linear Gradients using the HTML5 Canvas

  - by dwahlin

  Related HTML5 Canvas Posts: Getting Started with the HTML5 Canvas Rendering Text with the HTML5 Canvas Creating a Line Chart using the HTML5 Canvas New Pluralsight Course: HTML5 Canvas Fundamentals Gradients are everywhere. They’re used to enhance toolbars or buttons and help add additional flare to a web page when used appropriately. In the past we’ve always had to rely on images to render gradients which works well, but isn’t necessarily the most efficient (although 1 pixel wide images do work well). CSS3 provides a great way to render gradients in modern browsers (see http://www.colorzilla.com/gradient-editor for a nice online gradient generator tool) but it’s not the only option. If you’re working with charts, games, multimedia or other HTML5 Canvas applications you can also use gradients and render them on the client-side without relying on images. In this post I’ll introduce how to use linear gradients and discuss the different functions that can be used to create them.   Creating Linear Gradients Linear gradients can be created using the 2D context’s createLinearGradient function. The function takes the starting x,y coordinates and ending x,y coordinates of the gradient:   createLinearGradient(x1, y1, x2, y2);   By changing the start and end coordinates you can control the direction that the gradient renders. For example, adding the following coordinates causes the gradient to render from left to right since the y value stays at 0 for both points while the x value changes from 0 to 200. var lgrad = ctx.createLinearGradient(0, 0, 200, 0); Here’s an example of how changing the coordinates affects the gradient direction:   Once a linear gradient object has been created you can set color stops using the addColorStop() function. It takes the location where the color should appear in the gradient with 0 being the beginning and 1 being at the end (0.5 would be in the middle) as well as the color to display in the gradient. lgrad.addColorStop(0, 'white'); lgrad.addColorStop(1, 'gray');   An example of combining createLinearGradient() with addColorStop() is shown next:   Using createLinearGradient() var canvas = document.getElementById('myCanvas'); var ctx = canvas.getContext('2d'); var lgrad = ctx.createLinearGradient(0, 0, 200, 0); lgrad.addColorStop(0, 'white'); lgrad.addColorStop(1, 'gray'); ctx.fillStyle = lgrad; ctx.fillRect(0, 0, 200, 200); ctx.strokeRect(0, 0, 200, 200); This code renders a white to gray gradient as shown next: A live example of using createLinearGradient() is shown next. Click the Result tab to see the code in action.   In the next post on the HTML5 Canvas I’ll take a look at radial gradients and how they can be used. In the meantime, if you’re interested in learning more about the HTML5 Canvas and how it can be used in your Web or Windows 8 applications, check out my HTML5 Canvas Fundamentals course from Pluralsight. It has over 4 1/2 hours of canvas goodness packed in it.

  Read the article

• SQLAuthority News – Top 5 Latest Microsoft Certifications of 2013 – Guest Post

  - by Pinal Dave

  With the IT job market getting more and more competent by the day, certifications are a must for anyone who wishes to get a strong foothold in the industry. Microsoft community comes up with regular updates and enhancements in its existing products to keep up with the rapidly evolving requirements of the ICT industry. We bring you a list of five latest Microsoft certifications that you must consider acquiring this year. MCSE: SharePoint Learn all about Windows Server 2012 and Microsoft SharePoint 2013, which brings an advanced set of features to the fore in this latest version. It introduces new capabilities for business intelligence, social media, branding, search, identity management, mobile device among other features. Enjoy a great user experience with sharing and collaboration in community forum, within a pixel-perfect SharePoint website. Data connectivity and business intelligence tools allow users to process and access data, analyze reports, share and collaborate with each other more conveniently. Microsoft Specialist: Microsoft Project 2013 The only project management system that works seamlessly with other applications and cloud solutions of Microsoft, MS Project 2013 offers more than what meets the eye.  It provides for easier management and monitoring of projects so that users can ensure timely delivery while improving the productivity significantly. So keep all your projects on track and collaborate with your team like never before with this enhanced release! This one’s a must for all project managers. MCSE Messaging Another one of Microsoft gems is its messaging environment which has also launched the latest release Microsoft Exchange Server 2013. Messaging administrators can take up this training and validate their expertise in Unified Messaging, Exchange Online, PowerShell and Virtualization strategies, through MCSE Messaging certification in Exchange Server. If you wish to enhance productivity and data security of your organization while being flexible and extremely efficient, this is the right certification for you. MCSE Communication An enterprise can function optimally on the strength of its information flow and communication systems. With Lync Server 2013, you can introduce a whole new world of unified communications which consists of audio/video conferencing, dial-in, Persistent Chat, instant chat, and EDGE services in your organization. Utilize IT to serve and support business objectives by mastering this UC technology with this latest MCSE Communication course on using Microsoft Lync Server 2013. MCSE: SQL Server 2012 BI Platform The decision making process is largely influenced by underlying enterprise information used by the management for business intelligence. Therefore, a robust business intelligence platform that anchors enterprise IT and transform it to operational efficiencies is the need of the hour. SQL Server 2012 BI Platform certification helps professionals implement, manage and maintain a BI database infrastructure effectively. IT professionals with BI skills are highly sought after these days. MCSD: Windows Store Apps A Microsoft Certified Solutions Developer certification in Windows Store Apps validates your potential in designing interactive apps. Learn The Essentials of Developing Windows Store Apps using HTML5 and JavaScript and establish yourself as an ace developer capable of creating fast and fluid Metro style apps for Windows 8 that are accessible on a variety of devices. You can also go ahead and Learn Essentials of Developing Windows Store Apps using C# mode if you’re already familiar and working with C# programming language. Hence the developers are free to choose their own favorite development stream which opens doors for them to get ready for the latest and exciting application development platform called Windows store apps. Software developers with these skills are in great demand in the industry today. In order to continue being competitive in your respective fields, it is imperative that IT personnel update their knowledge on a regular basis. Certifications are a means to achieve this goal. Not considered to be an optional pre-requisite anymore, major IT certifications such as these are now essential to stay afloat in a cut-throat industry where technologies change on a daily basis. This blog is written by Aruneet Anand of Koenig Solutions. Koenig Solutions does training for all of the above courses. For more information, visit the website. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Microsoft Certifications

  Read the article

• concurrency::accelerator_view

  - by Daniel Moth

  Overview We saw previously that accelerator represents a target for our C++ AMP computation or memory allocation and that there is a notion of a default accelerator. We ended that post by introducing how one can obtain accelerator_view objects from an accelerator object through the accelerator class's default_view property and the create_view method. The accelerator_view objects can be thought of as handles to an accelerator. You can also construct an accelerator_view given another accelerator_view (through the copy constructor or the assignment operator overload). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator_view objects between them to determine if they refer to the same underlying accelerator. We'll see later that when we use concurrency::array objects, the allocation of data takes place on an accelerator at array construction time, so there is a constructor overload that accepts an accelerator_view object. We'll also see later that a new concurrency::parallel_for_each function overload can take an accelerator_view object, so it knows on what target to execute the computation (represented by a lambda that the parallel_for_each also accepts). Beyond normal usage, accelerator_view is a quality of service concept that offers isolation to multiple "consumers" of an accelerator. If in your code you are accessing the accelerator from multiple threads (or, in general, from different parts of your app), then you'll want to create separate accelerator_view objects for each thread. flush, wait, and queuing_mode When you create an accelerator_view via the create_view method of the accelerator, you pass in an option of immediate or deferred, which are the two members of the queuing_mode enum. At any point you can access this value from the queuing_mode property of the accelerator_view. When the queuing_mode value is immediate (which is the default), any commands sent to the device such as kernel invocations and data transfers (e.g. parallel_for_each and copy, as we'll see in future posts), will get submitted as soon as the runtime sees fit (that is the definition of immediate). When the value of queuing_mode is deferred, the commands will be batched up. To send all buffered commands to the device for execution, there is a non-blocking flush method that you can call. If you wish to block until all the commands have been sent, there is a wait method you can call. Deferring is a more advanced scenario aimed at performance gains when you are submitting many device commands and you want to avoid the tiny overhead of flushing/submitting each command separately. Querying information Just like accelerator, accelerator_view exposes the is_debug and version properties. In fact, you can always access the accelerator object from the accelerator property on the accelerator_view class to access the accelerator interface we looked at previously. Interop with D3D (aka DX) In a later post I'll show an example of an app that uses C++ AMP to compute data that is used in pixel shaders. In those scenarios, you can benefit by integrating C++ AMP into your graphics pipeline and one of the building blocks for that is being able to use the same device context from both the compute kernel and the other shaders. You can do that by going from accelerator_view to device context (and vice versa), through part of our interop API in amp.h: *get_device, create_accelerator_view. More on those in a later post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Code is not the best way to draw

  - by Bertrand Le Roy

  It should be quite obvious: drawing requires constant visual feedback. Why is it then that we still draw with code in so many situations? Of course it’s because the low-level APIs always come first, and design tools are built after and on top of those. Existing design tools also don’t typically include complex UI elements such as buttons. When we launched our Touch Display module for Netduino Go!, we naturally built APIs that made it easy to draw on the screen from code, but very soon, we felt the limitations and tedium of drawing in code. In particular, any modification requires a modification of the code, followed by compilation and deployment. When trying to set-up buttons at pixel precision, the process is not optimal. On the other hand, code is irreplaceable as a way to automate repetitive tasks. While tools like Illustrator have ways to repeat graphical elements, they do so in a way that is a little alien and counter-intuitive to my developer mind. From these reflections, I knew that I wanted a design tool that would be structurally code-centric but that would still enable immediate feedback and mouse adjustments. While thinking about the best way to achieve this goal, I saw this fantastic video by Bret Victor: The key to the magic in all these demos is permanent execution of the code being edited. Whenever a parameter is being modified, everything is re-executed immediately so that the impact of the modification is instantaneously visible. If you do this all the time, the code and the result of its execution fuse in the mind of the user into dual representations of a single object. All mental barriers disappear. It’s like magic. The tool I built, Nutshell, is just another implementation of this principle. It manipulates a list of graphical operations on the screen. Each operation has a nice editor, and translates into a bit of code. Any modification to the parameters of the operation will modify the bit of generated code and trigger a re-execution of the whole program. This happens so fast that it feels like the drawing reacts instantaneously to all changes. The order of the operations is also the order in which the code gets executed. So if you want to bring objects to the front, move them down in the list, and up if you want to move them to the back: But where it gets really fun is when you start applying code constructs such as loops to the design tool. The elements that you put inside of a loop can use the loop counter in expressions, enabling crazy scenarios while retaining the real-time edition features. When you’re done building, you can just deploy the code to the device and see it run in its native environment: This works thanks to two code generators. The first code generator is building JavaScript that is executed in the browser to build the canvas view in the web page hosting the tool. The second code generator is building the C# code that will run on the Netduino Go! microcontroller and that will drive the display module. The possibilities are fascinating, even if you don’t care about driving small touch screens from microcontrollers: it is now possible, within a reasonable budget, to build specialized design tools for very vertical applications. Direct feedback is a powerful ally in many domains. Code generation driven by visual designers has become more approachable than ever thanks to extraordinary JavaScript libraries and to the powerful development platform that modern browsers provide. I encourage you to tinker with Nutshell and let it open your eyes to new possibilities that you may not have considered before. It’s open source. And of course, my company, Nwazet, can help you develop your own custom browser-based direct feedback design tools. This is real visual programming…

  Read the article

• In GLSL is it possible to offset vertices based on height map colour?

  - by Rob

  I am attempting to generate some terrain based upon a heightmap. I have generated a 32 x 32 grid and a corresponding height map - In my vertex shader I am trying to offset the position of the Y axis based upon the colour of the heightmap, white vertices being higher than black ones. //Vertex Shader Code #version 330 uniform mat4 modelMatrix; uniform mat4 viewMatrix; uniform mat4 projectionMatrix; uniform sampler2D heightmap; layout (location=0) in vec4 vertexPos; layout (location=1) in vec4 vertexColour; layout (location=3) in vec2 vertexTextureCoord; layout (location=4) in float offset; out vec4 fragCol; out vec4 fragPos; out vec2 fragTex; void main() { // Retreive the current pixel's colour vec4 hmColour = texture(heightmap,vertexTextureCoord); // Offset the y position by the value of current texel's colour value ? vec4 offset = vec4(vertexPos.x , vertexPos.y + hmColour.r, vertexPos.z , 1.0); // Final Position gl_Position = projectionMatrix * viewMatrix * modelMatrix * offset; // Data sent to Fragment Shader. fragCol = vertexColour; fragPos = vertexPos; fragTex = vertexTextureCoord; } However the code I have produced only creates a grid with none of the y vertices higher than any others. This is the C++ code that generates the grid and texture co-orientates which I believe to be correct as the texture is mapped to the grid, hence the white blob in the middle. The grid-lines are generated in the fragment shader, sorry for any confusion. I have tried multiplying the r value of hmColour by 1000 unfortunately that had no effect. The only other problem it could be is that the texture coordinate data is incorrect ? for (int z = 0; z < MAP_Z ; z++) { for(int x = 0; x < MAP_X ; x++) { //Generate Vertex Buffer vertexData[iVertex++] = float (x) * MAP_X; vertexData[iVertex++] = 0; vertexData[iVertex++] = -(float) (z) * MAP_Z; //Colour Buffer NOT NEEDED colourData[iColour++] = 255.0f; // R colourData[iColour++] = 1.0f; // G colourData[iColour++] = 0.0f; // B //Texture Buffer textureData[iTexture++] = (float ) x * (1.0f / MAP_X); textureData[iTexture++] = (float ) z * (1.0f / MAP_Z); } } The heightmap texture I am trying to use appears like so (without grid-lines). This is the corresponding fragment shader // Fragment Shader Code #version 330 uniform sampler2D hmTexture; layout (location=0) out vec4 fragColour; in vec2 fragTex; in vec4 pos; void main(void) { vec2 line = fragTex * 32; // Without Gridlines fragColour = texture(hmTexture,fragTex); // With grid lines // + mix(vec4(0.0, 0.0, 1.0, 0.0), vec4(1.0, 1.0, 1.0, 1.0), // smoothstep(0.05,fract(line.y), 0.99) * smoothstep(0.05,fract(line.x),0.99)); }

  Read the article

• Silverlight Cream for May 27, 2010 -- #871

  - by Dave Campbell

  In this Issue: Phil Middlemiss, Max Paulousky, Jeff Wilcox, David Anson, René Schulte, Xianzhong Zhu, Jeff Handley, John Papa, Jeremy Likness, and Marlon Grech. Shoutouts: SilverLaw has a great demo at the Expression Gallery, and we're all going to look forward to the blog post explaining it: Flexible Surface Effect SilverLaw> has another use for the above in this text morphing Effect: Morphing Text Effect Matthias Shapiro contributed a chapter for a book on Visualization and it's available as a free download: Free Chapter From Beautiful Visualization Andy Beaulieu has a demo up as almost a spoiler for a future Coding4Fun app... and how cool is this: Shuffleboard: A Windows Phone 7 Sample Game From SilverlightCream.com: Separating Content and Presentation with the ContentControl Phil Middlemiss' latest is out on SilverlightShow and is all about the ContentControl and separating layout and content ... demo project source included Search Engine Optimization (SEO) for Silverlight Applications. Part 1 Max Paulousky has part one of a long series he's starting on a demo project to explain a bunch of MEF, MVVM, and WCF RIA concepts. This first one contains the overview and also discusses SEO. There is a link to the app and material in the post if you read Russian :) Updated Silverlight Unit Test Framework bits for Windows Phone and Silverlight 3 Jeff Wilcox has available updated Unit Test bits for Silverlight 3 -- read that as WP7... read the rest of the information on his post. Easily animate orientation changes for any Windows Phone application with this handy source code David Anson has some code up that you're going to want if you're programming WP7 ... just watch the video ... you'll be downloading the code just like I did :) SilverShader – Introduction to Silverlight and WPF Pixel Shaders René Schulte has a post up at Coding4Fun about PixelShaders... how to write them and an application that uses them... this is a great long tutorial... a must read. Developing Freecell Game Using Silverlight 3 Part 2 Xianzhong Zhu has part 2 of his FreeCell game development posted ... lots of detailed descriptions and code, plus all the code of course! Async Validation with RIA Services Jeff Handley has a post up that is sort of a follow-on to a year-old post on async validation with RIA services and DataForm and how it's all much easier now in SL4. Learning Blend with .toolbox (Silverlight TV #29) John Papa and Arturo Toledo discuss .toolbox in Silverlight TV #29 -- have you made yourself an avatar yet? ... well go get on-board with this great learning tool! Silverlight Out of Browser Dynamic Modules in Offline Mode OOB isn't difficult, dynamic modules can become a bit more, but what if you're OOB... ok what if you're OOB and offline? ... Jeremy Likness has a possible solution for this with an OfflineCatalog. MEFedMVVM v1.0 Explained Marlon Grech has a great into to MEFedMVVM in this post. If you're trying to get your head around MEF and MVVM in either WPF or Silverlight, here's a good starting point. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• XNA 4.0 - Normal mapping shader - strange texture artifacts

  - by Taylor

  I recently started using custom shader. Shader can do diffuse and specular lighting and normal mapping. But normal mapping is causing really ugly artifacts (some sort of pixeling noise) for textures in greater distance. It looks like this: Image link This is HLSL code: // Matrix float4x4 World : World; float4x4 View : View; float4x4 Projection : Projection; //Textury texture2D ColorMap; sampler2D ColorMapSampler = sampler_state { Texture = <ColorMap>; MinFilter = Anisotropic; MagFilter = Linear; MipFilter = Linear; MaxAnisotropy = 16; }; texture2D NormalMap; sampler2D NormalMapSampler = sampler_state { Texture = <NormalMap>; MinFilter = Anisotropic; MagFilter = Linear; MipFilter = Linear; MaxAnisotropy = 16; }; // Light float4 AmbientColor : Color; float AmbientIntensity; float3 DiffuseDirection : LightPosition; float4 DiffuseColor : Color; float DiffuseIntensity; float4 SpecularColor : Color; float3 CameraPosition : CameraPosition; float Shininess; // The input for the VertexShader struct VertexShaderInput { float4 Position : POSITION0; float2 TexCoord : TEXCOORD0; float3 Normal : NORMAL0; float3 Binormal : BINORMAL0; float3 Tangent : TANGENT0; }; // The output from the vertex shader, used for later processing struct VertexShaderOutput { float4 Position : POSITION0; float2 TexCoord : TEXCOORD0; float3 View : TEXCOORD1; float3x3 WorldToTangentSpace : TEXCOORD2; }; // The VertexShader. VertexShaderOutput VertexShaderFunction(VertexShaderInput input, float3 Normal : NORMAL) { VertexShaderOutput output; float4 worldPosition = mul(input.Position, World); float4 viewPosition = mul(worldPosition, View); output.Position = mul(viewPosition, Projection); output.TexCoord = input.TexCoord; output.WorldToTangentSpace[0] = mul(normalize(input.Tangent), World); output.WorldToTangentSpace[1] = mul(normalize(input.Binormal), World); output.WorldToTangentSpace[2] = mul(normalize(input.Normal), World); output.View = normalize(float4(CameraPosition,1.0) - worldPosition); return output; } // The Pixel Shader float4 PixelShaderFunction(VertexShaderOutput input) : COLOR0 { float4 color = tex2D(ColorMapSampler, input.TexCoord); float3 normalMap = 2.0 *(tex2D(NormalMapSampler, input.TexCoord)) - 1.0; normalMap = normalize(mul(normalMap, input.WorldToTangentSpace)); float4 normal = float4(normalMap,1.0); float4 diffuse = saturate(dot(-DiffuseDirection,normal)); float4 reflect = normalize(2*diffuse*normal-float4(DiffuseDirection,1.0)); float4 specular = pow(saturate(dot(reflect,input.View)), Shininess); return color * AmbientColor * AmbientIntensity + color * DiffuseIntensity * DiffuseColor * diffuse + color * SpecularColor * specular; } // Techniques technique Lighting { pass Pass1 { VertexShader = compile vs_2_0 VertexShaderFunction(); PixelShader = compile ps_2_0 PixelShaderFunction(); } } Any advice? Thanks!

  Read the article

• How do I use setFilmSize in panda3d to achieve the correct view?

  - by lhk

  I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

  Read the article

• Microsoft Build 2012 Day 1 Keynote Summary

  - by Tim Murphy

  So I have finally dried the tears after watching the Keynote for Build 2012.  This wasn’t because it was an emotional presentation, but because for the second year I missed the goodies.  Each on site attendee got a Surface RT, a Lumia 920 and a voucher for 100GB of SkyDrive storage. The event was opened with the announcement that in the three days since the launch of Windows 8 over 4 million upgrades have been sold.  I don’t care who you are that is an impressive stat.  Ballmer then spent a fair amount of time remaking the case for the Windows and Windows Phone platforms similar to what we have heard over the last to launch events. There were some cool, but non-essential demos.  The one that was the most fun was the Perceptive Pixel 82” slate device.  At first glance I wondered why I would ever want such a device, but then Ballmer explained it’s possible use for schools and boardrooms.  The actually made sense. Then things got strange.  Steve started explaining features that developers could leverage.  Usually this type of information is left to the product leads.  He focused on the integration with the Charms features such as Search and Share. Steve “Guggs” Guggenheim showed off an app that would appeal to my kids from Disney called “Agent P” which is base on Phineas and Ferb.  Then he got to the meat of the presentation.  We found out that you could add a tile that can be used to sell ad space.  In the same vein we also found out that you could use Microsoft’s, Paypal’s or any commerce engine of your own creation or choosing. For those who are interested in sports and especially developing sports apps you would have found the small presentation from Michael Bayle of ESPN.  He introduced the ESPN app which has tons of features.  For the developers in the crowd he also mentioned that ESPN has an API available at developer.espn.com. During the launch events we were told apps were coming.  In this presentation we were actually shown a scrolling list of logos and told about a couple of them.  Ballmer mentioned specifically Twitter, SAP and DropBox.  These are impressive names that were just a couple of the list impressive names. Steve Ballmer addressed the question of why you should develop for the Windows 8 platform.  He feels that Microsoft has the best commercial terms for developers, a better way to build apps than other platforms and a variety of form factors.  His key point though was the available volume of customers given the current Windows install base and assuming even a flat growth of the platform.  This he backed with a promise that Microsoft is going to do better at marketing and you won’t be able to avoid the ads that they are bringing out. The last section of the key note was present by Kevin Gallo from the Windows Phone team.  This was the real reason I tuned into the webcast.  He impressed upon those watching that the strength of developing for the Microsoft platform is the common programming model that now exist.  While there are difference between form factor implementations you can leverage code across them. He claimed that 90% of developer requests for Windows Phone 8 had been implemented.  These include: More controls with better performance Better live tiles including lock screen integration Speech support in custom apps Easier submission to the market place App camera integration VOIP and chat support Bluetooth and NFC support Native C++ development Direct 3D development   The quote from Kevin that stood out for me was that “Take your Dramamine and buckle your seatbelt type of games are coming to Windows Phone 8”.  He back this up by displaying a list of game development frameworks and then having Unity come out and do a demo. Ok, almost done … The last two things of note for me were the announcement that the SDK is immediately available at dev.windowsphone.com and that they were reducing the cost of an individual developer account to $8 for the next 8 days. Let the development commence. del.icio.us Tags: Build 2012,Windows 8,Windows Phone 8,Windows Phone

  Read the article

• Incomplete upgrade 12.04 to 12.10

  - by David

  Everything was running smoothly. Everything had been downloaded from Internet, packages had been installed and a prompt asked for some obsolete programs/files to be removed or kept. After that the computer crashed and and to manually force a shutdown. I turned it on again and surprise I was on 12.10! Still the upgrade was not finished! How can I properly finish that upgrade? Here's the output I got in the command line after following posted instructions: i astrill - Astrill VPN client software i dayjournal - Simple, minimal, digital journal. i gambas2-gb-form - A gambas native form component i gambas2-gb-gtk - The Gambas gtk component i gambas2-gb-gtk-ext - The Gambas extended gtk GUI component i gambas2-gb-gui - The graphical toolkit selector component i gambas2-gb-qt - The Gambas Qt GUI component i gambas2-gb-settings - Gambas utilities class i A gambas2-runtime - The Gambas runtime i google-chrome-stable - The web browser from Google i google-talkplugin - Google Talk Plugin i indicator-keylock - Indicator for Lock Keys i indicator-ubuntuone - Indicator for Ubuntu One synchronization s i A language-pack-kde-zh-hans - KDE translation updates for language Simpl i language-pack-kde-zh-hans-base - KDE translations for language Simplified C i libapt-inst1.4 - deb package format runtime library idA libattica0.3 - a Qt library that implements the Open Coll idA libbabl-0.0-0 - Dynamic, any to any, pixel format conversi idA libboost-filesystem1.46.1 - filesystem operations (portable paths, ite idA libboost-program-options1.46.1 - program options library for C++ idA libboost-python1.46.1 - Boost.Python Library idA libboost-regex1.46.1 - regular expression library for C++ i libboost-serialization1.46.1 - serialization library for C++ idA libboost-signals1.46.1 - managed signals and slots library for C++ idA libboost-system1.46.1 - Operating system (e.g. diagnostics support idA libboost-thread1.46.1 - portable C++ multi-threading i libcamel-1.2-29 - Evolution MIME message handling library i libcmis-0.2-0 - CMIS protocol client library i libcupsdriver1 - Common UNIX Printing System(tm) - Driver l i libdconf0 - simple configuration storage system - runt i libdvdcss2 - Simple foundation for reading DVDs - runti i libebackend-1.2-1 - Utility library for evolution data servers i libecal-1.2-10 - Client library for evolution calendars i libedata-cal-1.2-13 - Backend library for evolution calendars i libedataserver-1.2-15 - Utility library for evolution data servers i libexiv2-11 - EXIF/IPTC metadata manipulation library i libgdu-gtk0 - GTK+ standard dialog library for libgdu i libgdu0 - GObject based Disk Utility Library idA libgegl-0.0-0 - Generic Graphics Library idA libglew1.5 - The OpenGL Extension Wrangler - runtime en i libglew1.6 - OpenGL Extension Wrangler - runtime enviro i libglewmx1.6 - OpenGL Extension Wrangler - runtime enviro i libgnome-bluetooth8 - GNOME Bluetooth tools - support library i libgnomekbd7 - GNOME library to manage keyboard configura idA libgsoap1 - Runtime libraries for gSOAP i libgweather-3-0 - GWeather shared library i libimobiledevice2 - Library for communicating with the iPhone i libkdcraw20 - RAW picture decoding library i libkexiv2-10 - Qt like interface for the libexiv2 library i libkipi8 - library for apps that want to use kipi-plu i libkpathsea5 - TeX Live: path search library for TeX (run i libmagickcore4 - low-level image manipulation library i libmagickwand4 - image manipulation library i libmarblewidget13 - Marble globe widget library idA libmusicbrainz4-3 - Library to access the MusicBrainz.org data i libnepomukdatamanagement4 - Basic Nepomuk data manipulation interface i libnux-2.0-0 - Visual rendering toolkit for real-time app i libnux-2.0-common - Visual rendering toolkit for real-time app i libpoppler19 - PDF rendering library i libqt3-mt - Qt GUI Library (Threaded runtime version), i librhythmbox-core5 - support library for the rhythmbox music pl i libusbmuxd1 - USB multiplexor daemon for iPhone and iPod i libutouch-evemu1 - KernelInput Event Device Emulation Library i libutouch-frame1 - Touch Frame Library i libutouch-geis1 - Gesture engine interface support i libutouch-grail1 - Gesture Recognition And Instantiation Libr idA libx264-120 - x264 video coding library i libyajl1 - Yet Another JSON Library i linux-headers-3.2.0-29 - Header files related to Linux kernel versi i linux-headers-3.2.0-29-generic - Linux kernel headers for version 3.2.0 on i linux-image-3.2.0-29-generic - Linux kernel image for version 3.2.0 on 64 i mplayerthumbs - video thumbnail generator using mplayer i myunity - Unity configurator i A openoffice.org-calc - office productivity suite -- spreadsheet i A openoffice.org-writer - office productivity suite -- word processo i python-brlapi - Python bindings for BrlAPI i python-louis - Python bindings for liblouis i rts-bpp-dkms - rts-bpp driver in DKMS format. i system76-driver - Universal driver for System76 computers. i systemconfigurator - Unified Configuration API for Linux Instal i systemimager-client - Utilities for creating an image and upgrad i systemimager-common - Utilities and libraries common to both the i systemimager-initrd-template-am - SystemImager initrd template for amd64 cli i touchpad-indicator - An indicator for the touchpad i ubuntu-tweak - Ubuntu Tweak i A unity-lens-utilities - Unity Utilities lens i A unity-scope-calculator - Calculator engine i unity-scope-cities - Cities engine i unity-scope-rottentomatoes - Unity Scope Rottentomatoes

  Read the article

• Collision detection via adjacent tiles - sprite too big

  - by BlackMamba

  I have managed to create a collision detection system for my tile-based jump'n'run game (written in C++/SFML), where I check on each update what values the surrounding tiles of the player contain and then I let the player move accordingly (i. e. move left when there is an obstacle on the right side). This works fine when the player sprite is not too big: Given a tile size of 5x5 pixels, my solution worked quite fine with a spritesize of 3x4 and 5x5 pixels. My problem is that I actually need the player to be quite gigantic (34x70 pixels given the same tilesize). When I try this, there seems to be an invisible, notably smaller boundingbox where the player collides with obstacles, the player also seems to shake strongly. Here some images to explain what I mean: Works: http://tinypic.com/r/207lvfr/8 Doesn't work: http://tinypic.com/r/2yuk02q/8 Another example of non-functioning: http://tinypic.com/r/kexbwl/8 (the player isn't falling, he stays there in the corner) My code for getting the surrounding tiles looks like this (I removed some parts to make it better readable): std::vector<std::map<std::string, int> > Game::getSurroundingTiles(sf::Vector2f position) { // converting the pixel coordinates to tilemap coordinates sf::Vector2u pPos(static_cast<int>(position.x/tileSize.x), static_cast<int>(position.y/tileSize.y)); std::vector<std::map<std::string, int> > surroundingTiles; for(int i = 0; i < 9; ++i) { // calculating the relative position of the surrounding tile(s) int c = i % 3; int r = static_cast<int>(i/3); // we subtract 1 to place the player in the middle of the 3x3 grid sf::Vector2u tilePos(pPos.x + (c - 1), pPos.y + (r - 1)); // this tells us what kind of block this tile is int tGid = levelMap[tilePos.y][tilePos.x]; // converts the coords from tile to world coords sf::Vector2u tileRect(tilePos.x*5, tilePos.y*5); // storing all the information std::map<std::string, int> tileDict; tileDict.insert(std::make_pair("gid", tGid)); tileDict.insert(std::make_pair("x", tileRect.x)); tileDict.insert(std::make_pair("y", tileRect.y)); // adding the stored information to our vector surroundingTiles.push_back(tileDict); } // I organise the map so that it is arranged like the following: /* * 4 | 1 | 5 * -- -- -- * 2 | / | 3 * -- -- -- * 6 | 0 | 7 * */ return surroundingTiles; } I then check in a loop through the surrounding tiles, if there is a 1 as gid (indicates obstacle) and then check for intersections with that adjacent tile. The problem I just can't overcome is that I think that I need to store the values of all the adjacent tiles and then check for them. How? And may there be a better solution? Any help is appreciated. P.S.: My implementation derives from this blog entry, I mostly just translated it from Objective-C/Cocos2d.

  Read the article

• DirectX particle system. ConstantBuffer

  - by Liuka

  I'm new in DirectX and I'm making a 2D game. I want to use a particle system to simulate a 3D starfield, so each star has to set its own constant buffer for the vertexshader es. to set it's world matrix. So if i have 500 stars (that move every frame) i need to call 500 times VSsetconstantbuffer, and map/unmap each buffer. with 500 stars i have an average of 220 fps and that's quite good. My bottelneck is Vs/PsSetconstantbuffer. If i dont call this function i have 400 fps(obliviously nothing is display, since i dont set the position of the stars). So is there a method to speed up the render of the particle system?? Ps. I'm using intel integrate graphic (hd 2000-3000). with a nvidia (or amd) gpu will i have the same bottleneck?? If, for example, i dont call setshaderresource i have 10-20 fps more (for 500 objcets), that is not 180.Why does SetConstantBuffer take so long?? LPVOID VSdataPtr = VSmappedResource.pData; memcpy(VSdataPtr, VSdata, CszVSdata); context->Unmap(VertexBuffer, 0); result = context->Map(PixelBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &PSmappedResource); if (FAILED(result)) { outputResult.OutputErrorMessage(TITLE, L"Cannot map the PixelBuffer", &result, OUTPUT_ERROR_FILE); return; } LPVOID PSdataPtr = PSmappedResource.pData; memcpy(PSdataPtr, PSdata, CszPSdata); context->Unmap(PixelBuffer, 0); context->VSSetConstantBuffers(0, 1, &VertexBuffer); context->PSSetConstantBuffers(0, 1, &PixelBuffer); this update and set the buffer. It's part of the render method of a sprite class that contains a the vertex buffer and the texture to apply to the quads(it's a 2d game) too. I have an array of 500 stars (sprite setup with a star texture). Every frame: clear back buffer; draw the array of stars; present the backbuffer; draw also call the function update( which calculate the position of the sprite on screen based on a "camera class") Ok, create a vertex buffer with the vertices of each quads(stars) seems to be good, since the stars don't change their "virtual" position; so.... In a particle system (where particles move) it's better to have all the object in only one vertices array, rather then an array of different sprite/object in order to update all the vertices' position with a single setbuffer call. In this case i have to use a dynamic vertex buffer with the vertices positions like this: verticesForQuad={{ XMFLOAT3((float)halfDImensions.x-1+pos.x, (float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(1.0f, 0.0f) }, { XMFLOAT3((float)halfDImensions.x-1+pos.x, -(float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(1.0f, 1.0f) }, { XMFLOAT3(-(float)halfDImensions.x-1+pos.x, (float)halfDImensions.y-1.pos.y, 1.0f), XMFLOAT2(0.0f, 0.0f) }, { XMFLOAT3(-(float)halfDImensions.x-1.pos.x, -(float)halfDImensions.y-1+pos.y, 1.0f), XMFLOAT2(0.0f, 1.0f) }, ....other quads} where halfDimensions is the halfsize in pixel of a texture and pos the virtual position of a star. than create an array of verticesForQuad and create the vertex buffer ZeroMemory(&vertexDesc, sizeof(vertexDesc)); vertexDesc.Usage = D3D11_USAGE_DEFAULT; vertexDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; vertexDesc.ByteWidth = sizeof(VertexType)* 4*numStars; ZeroMemory(&resourceData, sizeof(resourceData)); resourceData.pSysMem = verticesForQuad; result = device->CreateBuffer(&vertexDesc, &resourceData, &CvertexBuffer); and call each frame Context->IASetVertexBuffers(0, 1, &CvertexBuffer, &stride, &offset); But if i want to add and remove obj i have to recreate the buffer each time, havent i?? There is a faster way? I think i can create a vertex buffer with a max size (es. 10000 objs) and when i update it set only the 250 position (for 250 onjs for example) and pass this number as the vertexCount to the draw function (numObjs*4), or i'm worng

  Read the article

• motion computation from video using pyglet in python

  - by kuaywai

  Hi, I am writing a simple motion detection program but i want it to be cross platform so im using python and the pyglet library since it provides a simple way to load videos in different formats (specially wmv and mpeg). So far i have the code given below which loads the movie and plays it in a window. Now i need to: 1) grab frame at time t and t-1 2) do a subtraction to see which pixels are active for motion detection. any ideas on how to grab frames and to skip over frames and is it possible to put the pixel values into a matrix in numpy or something directly from pyglet? or should look into using something other than pyglet? thanks kuaywai import pyglet import sys window = pyglet.window.Window(resizable=True) window.set_minimum_size(320,200) window.set_caption('Motion detect 1.0') video_intro = pyglet.resource.media('movie1.wmv') player = pyglet.media.Player() player.queue(video_intro) print 'calculating movie size...' if not player.source or not player.source.video_format: sys.exit myWidth = player.source.video_format.width myHeight = player.source.video_format.height if player.source.video_format.sample_aspect 1: myWidth *= player.source.video_format.sample_aspect elif player.source.video_format.sample_aspect < 1: myHeight /= player.source.video_format.sample_aspect print 'its size is %d,%d' % (myWidth,myHeight) player.play() @window.event def on_draw(): window.clear() (w,h) = window.get_size() player.get_texture().blit(0, h-myHeight, width=myWidth, height=myHeight) pyglet.app.run()

  Read the article

• Adding a UINavigationController as a subview of UIView

  - by eagle

  I'm trying to display a UILabel on top of a UINavigationController. The problem is that when I add the UILabel as a subview of UIWindow it will not automatically rotate since it is not a subview of UIViewController (UIViewController automatically handles updating subviews during rotations). This is the hierarchy I was using: UIWindow UILabel UINavigationController So I was thinking I could use the following hierarchy: UIWindow UIViewController UIView UILabel UINavigationController This way the label could be displayed on top of the UINavigationController's bar while also automatically being rotated since it is a subview of UIViewController. The problem is that when I try adding a UINavigationController as a subview of a view: [myViewController.view addSubview:myNavigationController.view]; it will appear 20 pixels downwards. Which I'm guessing is because it thinks it needs to make room for the status bar. But, since the UINavigationController is being placed inside a UIView which does not overlay on top of the status bar, it is incorrectly adding an additional 20 pixels. In other words, the top of the UINavigationBar is at the screen's 40 pixel mark instead of at 20 pixels. Is there any easy way to just shift the UINavigationController and all of its elements (e.g. navigation bar, tool bar, root view controller) up 20 pixels? Or to let it know that it shouldn't compensate for a status bar? If not, I guess I would need to use my first hierarchy mentioned above and figure out how to rotate the label so it is consistent with the navigation bar's rotation. Where can I find more information on how to do this? Note: by "displaying a label on top of the navigation bar", I mean it should overlay on top of the navigation bar... it can't simply be wrapped in a bar button item and placed as one of the items of the navigation bar.

  Read the article

• managing images in an iphone/ipad universal app

  - by taber

  Hi, I'm just curious as to what methods people are using to dynamically use larger or smaller images in their universal iPhone/iPad apps. I created a large test image and I tried scaling down (using cocos2d) by 0.46875. After viewing that in the iPhone 4.0 simulator I found the results were pretty crappy... rough pixel edges, etc. Plus, loading huge image files for iPhone users when they don't need them is pretty lame. So I guess what I will probably have to do is save out two versions of every sprite... large (for the iPad side) and small (for iPhone/iPod Touch) then detect the user's device and spit out the proper sprite like so: NSString *deviceType = [UIDevice currentDevice].model; CCSprite *test; if([deviceType isEqualToString:@"iPad"]) { test = [CCSprite spriteWithFile:@"testBigHuge.png"]; } else { test = [CCSprite spriteWithFile:@"testRegularMcTiny.png"]; } [self addChild: test]; How are you guys doing this? I'd rather avoid sprinkling all of my code with if statements like this. I want to also avoid using .xib files since it's an OpenGL-based app. Thanks!

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >