Search Results

Search found 16383 results on 656 pages for 'bi applications'.

Page 570/656 | < Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577  | Next Page >

  • Access server using IP on another interface

    - by Markos
    I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

    Read the article

  • Mapped network drive missing from My Computer and Explorer

    - by matt wilkie
    On a Windows XP Pro SP3 machine one network drive refuses to show up in My Computer or Explorer. The missing drive letter is G:, if that matters. Other mappings work fine. Other profiles one the same machine have no problem mapping G:. I can access the G: just fine typing it into the address bar or in CMD shell. I've used TweakUI to toggle hide/show G: with no difference. TweakUI says G: should be visible. I've logged off,on between toggles to make sure the settings are taking effect. I've looked at reg key [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] and made sure it's zero'd. [insert ref link here] We've limped along with this broken setup for some time, just working around it, but some applications do not allow typing in a path when choosing a place to save files and it's reached the point where it's intolerable. So, anyone have any idea why XP won't show this drive letter? or how to fix it?

    Read the article

  • How can I avoid permission denied errors when attempting to deploy a rails app with capistrano?

    - by joshee
    Total noob here. I'm attempting to deploy an app through Capistrano. I'm getting relentless permission denied errors when I attempt to run cap deploy:update. Seemingly at least some of these errors are due to missing directories that trigger a "Permission Denied" error. (I'm doing setup on root just temporarily.) set :user, 'root' set :domain, 'domainname.com' set :application, 'appname' # adjust if you are using RVM, remove if you are not $:.unshift(File.expand_path('./lib', ENV['rvm_path'])) require "rvm/capistrano" set :rvm_ruby_string, '1.9.2' # file paths set :repository, "ssh://[email protected]/~/git/appname.git" set :deploy_to, "/var/rails/appname" # distribute your applications across servers (the instructions below put them # all on the same server, defined above as 'domain', adjust as necessary) role :app, domain role :web, domain role :db, domain, :primary => true set :deploy_via, :remote_cache set :scm, 'git' set :branch, 'master' set :scm_verbose, true set :use_sudo, false set :rails_env, :production namespace :deploy do desc "cause Passenger to initiate a restart" task :restart do run "touch #{current_path}/tmp/restart.txt" end desc "reload the database with seed data" task :seed do run "cd #{current_path}; rake db:seed RAILS_ENV=#{rails_env}" end end after "deploy:update_code", :bundle_install desc "install the necessary prerequisites" task :bundle_install, :roles => :app do run "cd #{release_path} && bundle install" end Here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/shared/cached-copy'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly I'm able to ssh without a password, so not sure about that publickey error. By the way, if I run cap deploy:update without set :deploy_via, :remote_cache, here's my result: ** [domainname.com :: out] Cloning into '/var/rails/appname/releases/20120326204237'... ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied, please try again. ** [domainname.com :: err] Permission denied (publickey,gssapi-with-mic,password). ** [domainname.com :: err] fatal: The remote end hung up unexpectedly command finished Thanks a lot for your help with this.

    Read the article

  • Encrypting peer-to-peer application with iptables and stunnel

    - by Jonathan Oliver
    I'm running legacy applications in which I do not have access to the source code. These components talk to each other using plaintext on a particular port. I would like to be able to secure the communications between the two or more nodes using something like stunnel to facilitate peer-to-peer communication rather than using a more traditional (and centralized) VPN package like OpenVPN, etc. Ideally, the traffic flow would go like this: app@hostA:1234 tries to open a TCP connection to app@hostB:1234. iptables captures and redirects the traffic on port 1234 to stunnel running on hostA at port 5678. stunnel@hostA negotiates and establishes a connection with stunnel@hostB:4567. stunnel@hostB forwards any decrypted traffic to app@hostB:1234. In essence, I'm trying to set this up to where any outbound traffic (generated on the local machine) to port N forwards through stunnel to port N+1, and the receiving side receives on port N+1, decrypts, and forwards to the local application at port N. I'm not particularly concerned about losing the hostA origin IP address/machine identity when stunnel@hostB forwards to app@hostB because the communications payload contains identifying information. The other trick in this is that normally with stunnel you have a client/server architecture. But this application is much more P2P because nodes can come and go dynamically and hard-coding some kind of "connection = hostN:port" in the stunnel configuration won't work.

    Read the article

  • What's throttling the database?

    - by Troels Arvin
    Hardware: Intel x86_64 with 192GB of RAM. OS: CentOS 5.4 x86_64. DBMS: DB2 v. 9.7.1 64 bit. During certain special workloads (e.g. parallel REORGs/RUNSTATs), I've seen the server transporting 450MB/s with 25000IO/s (yes, there is probably some storage system caching happening here) while all CPU cores were happily working in an even mix of usermode/wait. And disk benchmark tools can also bring some very satisfying bandwith and IO/s numbers to the table. On the other hand, we also have another scenario: A single rather complex query with at least one large table scan. db2's "list applications" reports that the query is Executing (not locked). IO: At most 10MB/s, 500 IO/s; CPU: two cores in 99.9% wait state, all other cores 100% idle. The tables which the query reads from have been altered to have LOCKSIZE=TABLE, so I would think that lock list work is zero. What's going on in such a situation? What tools/snapshots/... can I use to gain better insight in such a case?

    Read the article

  • Can I boot up a virtual machine natively?

    - by Anshul
    My question is: Is is possible to run a virtual machine natively on your hardware if you have installed the proper drivers etc? In other words, can I use a VHD as a regular hard drive to boot from? The reason I want to do this is that I do both graphics-intensive and audio-intensive work, but my computer is not powerful enough to handle both at the same time and many times I install a bunch of audio programs that I don't want affecting the stability of my graphics programs. Basically I wanted to have sandboxing between the two sets of applications. So I tried running the graphics-intensive programs in a VirtualBox VM and the audio-intensive work natively (simply because it's a pain to route ASIO audio devices in/out of VirtualBox). This kind-of works - the graphics-intensive stuff is tolerable, but still relatively slow, because it's running inside a VM. So my next idea was to just dual-boot and install the graphics and audio programs in separate partitions but I frequently use them in tandem, so it wouldn't be practical to reboot my machine every time I need to use the other set of programs. But I could live with this scenario: If I need to do more audio-intensive stuff, I'll just boot up to the audio partition and run the graphics programs in a VM, and then when I'm working heavily on the graphics part, I'll just boot the graphics partition as a regular OS directly on the hardware. Is this possible? For example by booting up a VHD as a regular hard drive? Or by setting up dual-boot, and every time the audio partition is shut down, synchronize the graphics VM VHD with the native graphics partition? Is it practical, given the above scenario? And if it's not possible, barring buying another computer, can anyone suggest a best-of-all-worlds setup (the two worlds being performance, sandboxing, and running in parallel) for the above scenario? Thanks in advance.

    Read the article

  • Moving a site from IIs6 to IIS7.5

    - by Sukotto
    I need to move a site off of IIS6 (Win Server 2003) and onto IIS7.5 (Win Server 2008) as soon as possible. Preferably tomorrow. The site itself is a delightful mix of classic asp (vbscript) and one-off asp.net (C#) applications (each asp.net app is in its own virtual dir and has a self-contained web.config). In case it's relevant, this is a sort of research site made up of 40 or 50 unconnected microsites. Each microsite is typically a simple form allowing a user to submit a form, which then runs a Stored Proc on a sqlserver db and displays a chart and/or table of the results. There is very little security to worry about. The database connection info is in a central file (in the case of the classic asp) or app's individual web.config (lots of duplication there) To add a little spice to the exercise... I have no idea how to admin IIS The company no longer employs the sysadmin or the guys who set this thing up. (They're not going to employ me much longer either but my sense of professional pride does not permit me to just walk away from this task). The servers are on mutually firewalled networks and I have to perform a convoluted, multi-step process to copy anything from one to the other. Would someone please point me to a crash-course tutorial for accomplishing the above? I have: a complete copy of the site's filesystem on the new box installed the 3rd party charting tool on the new system a config.xml file from the "all tasks - save configuration to a file" right click menu. There doesn't seem to be a way to import it on the new system however. The newer IIS manager has a completely different UI and I'm totally lost. Please help.

    Read the article

  • Problem with running a script at startup as root?

    - by Usman Ajmal
    Hi The main question: Is there a way I can run 'completely' one of my script when ubuntu's desktop appears no matter if root , administrator, desktop user or an unprivileged user logged in? What does the script do? The script mounts a partition, looks for a file in that partition and finally on the basis of that file a decision of copying a partition to another partition is made. That copying is done via dd if=/dev/sda2 of=/dev/sda5 When does the script run finely? Script runs smoothly when I run it from the terminal by sudo ./my_copying_script This command asks me for the password of currently logged in user. I enter the password and the script starts working. When does the script NOT run finely? I want to run the script at startup. I set it a startup program by using the Startup Applications utility of Ubuntu. Script ran at startup but exited at the dd command returing following error: dd: opening '/dev/sda2': Permission denied On edk's suggestion I set the owner of my_copying_script as root and set the SUID. Now the permissions of my_copying_script are (-rwsr-sr-x). edk's point of view was that once I set the suid, the startup program will run with the permissions of its owner. I did that but the same /dev/sda2 permission denied error came up. I then prefixed the dd with sudo as mentioned below sudo dd if=/dev/sda2 of=/dev/sda5 but this returned following error: sudo: no tty present and no askpass program specified In other words the mounting failed. If I run the script using sudo ./myProgram i don't face this problem and the drive gets mounted successfully.

    Read the article

  • Upgrade Centos 5 tot PHP 5.2 or 5.3 [recommended way?]

    - by solid
    We are using Zend Framework and in version 2, php 5.2 will be the minimum requirement. We love CentOS and we'd like to keep using it, but PHP 5.1 just won't do anymore when developing web applications with Zend framework. I found several links to solutions to upgrade with external repositories. http://serverfault.com/questions/106801/recommended-method-to-upgrade-php-5-1-6-to-5-2-x-on-centos-5 http://www.webtatic.com/blog/2009/05/installing-php-526-on-centos-5/ http://www.webtatic.com/blog/2009/06/php-530-on-centos-5/ We'd like to see another solution with the use of an "official?" CentOS repository if any is available. We only need to upgrade PHP, the rest of the CentOS setup is fine the way it is. For us, it's important however to keep the YUM cycle intact using the normal repositories. So in short: is it even possible to upgrade only PHP by using an external repo or otherwise? While still upgrading all our other packages safely through normal yum usage? Thanks for your help!

    Read the article

  • VMWare Workstation 8 Disk I/O & Hard Faults

    - by Scott
    I have VMWare Workstation 8 installed on a host machine with the following specs: Intel i5 2500k CPU 16GB DDR3 1600 ram 1TB Western Digital Caviar Black HD I have two Windows 7 virtual machines configured (currently running one at a time but will be operating both at once when my 32GB RAM kit arrives in a couple days). Each one is configured with 8GB of RAM and no tweaks/performance customizations or anything done. All of the VMWare settings are the defaults. When I boot into these machines and run various programs (Visual Studio, Outlook, etc), I can hear the disk thrashing quite a bit and checking Resource Monitor, I can see that I'm getting anywhere between 300-800 hard faults per second. From the host machine, it shows they're coming from the VMWare image. If I go to the virtual machine, whatever app I'm currently loading is the image that's causing the hard faults. As I understand it, hard faults are (simply) when an address in memory has been swapped out to the page file and has to be read from the page file instead of from memory. I don't understand why this is happening though. With 8GB of ram on the guest machine and 6.5GB available, what could be causing this? I know Windows 7 supposedly improved on page file management over XP but it seems excessive for this kind of slowdown, disk thrashing and high hard fault count when I have that much free RAM. Is there anything I can to to improve the performance in my guest machines? On the host machine, I can open/run any applications at all and hard faults stays around 0 with low disk I/O.

    Read the article

  • How to reproduce the behavior of Mac OS X's dead keys on Windows 7?

    - by Pascal Qyy
    I'm French, but I've chosen to take a QWERTY keyboard for my MacBook Pro for many reasons: first of all, the AZERTY keyboard is not at all ergonomic because it has no numeric keypad, and I must use MAJ or CAPS LOCK to access to the numeric keys ; secondly, I've bought this mac for development ; and chars {, }, etc., are not directly accessible on the Apple AZERTY keyboard the last thing is that: the diacritics are VERY easy to produce on an Apple keyboard with Mac OS X : ? + c for a ç, for example, and many dead keys easy to use (e.g. ? + e, then e give you an é. So, I have no difficulties to write in my native language with this keyboard under Mac OS X. BUT, when I boot on Windows 7's Boot Camp partition, or when I use applications from it through VMware Unity, it is no longer the same comfort! Without numeric keypad, it's impossible to use it for produce specials characters (e.g.: Alt + 0231 for the ç) I've tried many solutions, like auto replacement in Microsoft Office (e.g.: ,,c being replaced by ç), but for all my diacritics, I must type a space, then a back space before the replacement work. I've also tried third party software, as Texter, but it is very buggy and don't work properly (or don't work at all) in many case! So, is there a solution somewhere, to have this Mac OS X's nice and comfortable way of producing diacritics for Windows 7? Thank in advance for your help and your time!

    Read the article

  • How do I get ftype & assoc to match Windows Explorer?

    - by Gauthier
    I changed the association to use upon launching a .py file, via Windows Explorer: Tools - Folders - File types. Then browse to .py. Change the association to Wordpad. Now when I type the name of a py file in the command line, Wordpad opens it. But assoc and ftype in the command line still return the following: C:\> assoc .py .py = Python.File C:\> ftype Python.File Python.File = "C:\Program\Python27\python.exe" "%1" %* How come the association is working, but assoc and ftype are not aware of it? I did restart the prompt. More info from my registry: HKEY_CLASSES_ROOT\.py = Python.File HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.py\Application = wordpad.exe HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.py\OpenWithProgids\Python.File = HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.py\(Standard) = Python.File More registry: HKEY_CLASSES_ROOT\Applications\python.exe\shell\open\command\(Standard) = "C:\Program\Python27\python.exe" "%1" %*` I suppose this is what is showing up in ftype Python.File. But it does not seem to get used. (I am doing this for testing, so I can eventually choose my default version of Python easily).

    Read the article

  • Windows 7 64-bit Google Chrome Makes Desktop Unresponsive

    - by Meengla
    For the past 1-2 weeks my desktop becomes unresponsive sometimes. The problem seems to happen as I load a page in Google Chrome; it could be any page though today it happened when I tried to load a page with Flash content in it. The problem is not consistent and there is no pattern. I can do a virus scan using some software (not antivirus installed--never needed that) but I strongly suspect it is some software I installed or some Windows Update. This is a very powerful Dell Optiplex 990 with 16GB RAM, so Memory shouldn't be an issue. When the problem happens the cursor becomes spinning even over the taskbar and control alt delete takes a long time. Eventually I get a message that 'this program is not responding' with end/close and 'cancel' icon. But repeated end or cancel does nothing. Then the menu for ctrl alt del comes up. The rest of the applications keep running fine though I can't get to them because the cursor is the wait-cursor. What is happening? How can I find what exactly caused the problem? Thanks.

    Read the article

  • When modern computers boot, what initial setup of RAM do they execute, and how does it exactly work?

    - by user272840
    I know the title reeks of confusion, and some of you might assume I am just wondering about how the computer boots in general, but I'm not. But I'll sort this out for you people now: 1.Onboard firmware is how mostly all modern computer devices work, whether or not with EFI/UEFI(even without "onboard firmware", older computers still employed bank switching, or similar methods with snap-in firmware, cartridges, etc.) 2.On startup there is no "programs" running in the traditional sense yet, i.e. no kernel, OS, user-applications; all of the instructions, especially the very first instruction, is specified by the Instruction Pointer, I am guessing. How is the IP/PC/etc. set to first point to an address for a BIOS/firmware/etc. instruction, and how do the BIOS instructions map themself out in memory prior to startup? 3.Aside from MMIO, BIOS uses certain RAM addresses to have instructions. The big ? comes in when I ask this ... how does BIOS do this? Conclusion: I am assuming that with the very first instruction there is an initial hardware setup for BIOS prior to complete OS bootup. What I want to know is if it's hardware engineered to always work this way, if there's another step in this bootup method I am missing, a gap of information I am unaware of, or how this all works from the very first instruction, and the RAM data itself.

    Read the article

  • What XMonad Configuration Best Replicates Default Ion3 Behavior and Feature Set?

    - by mtp
    Not being very familiar with Haskell and lamenting that Ion 3 is now abandonware, I am curious if anyone out there has found a way of replicating the default Ion 3 behavior and aesthetics in XMonad. If I can't have a near-exact replica of Ion 3-style behavior in XMonad, here is what would be critical to me: Virtual desktops that are empty by default and that spawn full-screen applications, which can be split horizontally or vertically evenly, leaving an empty adjacent pane. The panes, which house open windows, are manually resizable, preferably via keyboard. The panes exhibit tabbed behavior, meaning that they can house multiple windows. Windows can be tagged and moved between panes / virtual desktops via keyboard sequence. A given window may be temporarily exploded into full-screen mode via keyboard sequence. Each new virtual desktop starts in the same state—i.e., with one pane. Each virtual desktop may have its panes divided independently of other virtual desktops. From my investigation, it appears that there are several configurations that provide #3. For as much as I want to spend the time to familiarize myself with Haskell, I just simply don't have time. Any suggestions would be greatly appreciated. As far as I can tell, Ion has no conception of master pane or window, so this behavior is not desired.

    Read the article

  • Using rsync to migrate files between windows servers: problems with Excel spreadsheets

    - by HorusKol
    We've been migrating about 220 GB of data from a Windows 2003 Server to a Windows 2008 Server, and because of the time it would take to copy that data and the necessity of keeping it available for users, I came up with the idea of using rsync on an Ubuntu server to broker the migration. (I might have gone for a proper Windows solution - but the applications I found were a bit pricey for a one-shot like this - and permissions are not a problem). All well and good - and today I'm making the last sync and confirming that the new server is up-to-date using diff, but I"ve noticed an odd thing with Excel spreadsheets (.xls). Every instance of an Excel spreadsheet that has already been copied in a previous in a previous synchronisation is being marked as "already up-to-date" by rsync. However, when I then run a diff, I'm told that the files differ. I'm manually copying them, as there are but a handful, but I was wondering what might be causing this. No other filetype in the entire 220 GB tree has had any problem like this - just the Excel/xls files. It'd be great if someone could come up with an explanation.

    Read the article

  • SELinux - Allow multiple services access to same /home/dir

    - by Mike Purcell
    I currently have SELinux enabled and have been able to configure apache to allow access to /home/src/web with a chcon command granting the 'httpd_sys_content_t' type. But now I am trying to serve the rsyslogd.conf file from the same directory, but every time I start rsyslogd I see an entry in my audit log saying that rsyslogd was denied access. My question is, is it possible to grant two applications the ability to access the same directory, while still keeping SELinux enabled? Current perms on /home/src: drwxr-xr-x. src src unconfined_u:object_r:httpd_sys_content_t:s0 src Audit log message: type=AVC msg=audit(1349113476.272:1154): avc: denied { search } for pid=9975 comm="rsyslogd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:syslogd_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349113476.272:1154): arch=c000003e syscall=2 success=no exit=-13 a0=7f9ef0c027f5 a1=0 a2=1b6 a3=0 items=0 ppid=9974 pid=9975 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=30 comm="rsyslogd" exe="/sbin/rsyslogd" subj=unconfined_u:system_r:syslogd_t:s0 key=(null) -- Edit -- Came across this post, which is sort of what I am trying to accomplish. However when I viewed the list of allowed sebool params, the only relating to syslog was: syslogd_disable_trans (SELinux Service Protection), seems like I can maintain the current SELinux 'type' on the /home/src/ dir, but set the bool on syslogd_disable_trans to false. I wonder if there is a better approach?

    Read the article

  • TEMP environment variable occasionally set incorrectly

    - by Roger Lipscombe
    Occasionally, I find my TEMP and TMP environment variables set to C:\Windows\TEMP. They should be set to %USERPROFILE%\AppData\Local\Temp, and are configured correctly in System Properties. This manifests itself as error messages like the following: ---> System.InvalidOperationException: Unable to generate a temporary class (result=1). error CS2001: Source file 'C:\Windows\TEMP\gb_pz65v.0.cs' could not be found error CS2008: No inputs specified ...which occurs in various .NET applications (in particular Visual Studio 2010 or SQL Server Management Studio). Alternatively, SQL Server Management Studio will report: Value cannot be null. Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer) If I run PowerShell elevated, then $env:TEMP is set correctly. If I run PowerShell non-elevated, then it's not. I believe that it should be set correctly in both cases. If not, it's the wrong way round. The same is true for CMD.EXE. Rebooting fixes it, temporarily, until something breaks it again. Presumably something loaded into Explorer.exe is messing with its environment variables, but what? The values in the registry are correct, even while this is happening: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment has TEMP = %SYSTEMROOT%\Temp HKCU\Environment has TEMP = %USERPROFILE%\AppData\Local\Temp By setting a breakpoint on shell32!RegenerateUserEnvironment, I'm able to trap it when it happens, but I still don't know why explorer.exe is reading the wrong environment variables. I can reproduce it consistently by broadcasting a WM_SETTINGCHANGE message (I wrote a one-line C++ program to do this). Watching the activity in Process Monitor shows that explorer.exe doesn't even look at HKCU\Environment. What is going on?

    Read the article

  • Performance decrease in every game and application

    - by Márk Vincze
    When I start a game, initially it runs smoothly, but after a couple of minutes, the performance gradually decreases to the point of being unplayable (1-2 FPS). The sound also starts to lag at this point. This does not happen every time I start my PC, usually exiting the game, rebooting, then starting the game again solves the problem, and I can play with perfect FPS for as long as I want. I could not find any deterministic reason when this happens and when doesn't. It happens in every game I tried (SWTOR, Diablo 3, Skyrim), and not even games, but simple applications like a browser or the Control Panel can get unusably slow. This is a brand new PC I bought three months ago, and this problem occurs since the first day I've been using it. Could you provide any advice how to further diagnose the problem? I tried to reinstall Windows, and tried different video card drivers, but it did not help. It would be important to know whether this is a hardware or software problem, because I can use the warranty if it is a hardware issue. (I did not want to return the PC yet, because I can't reproduce the issue deterministically.) Spec of the pc: Motherboard: ASROCK H61M-HVS CPU: INTEL Core i3-2120 3.30GHz 1155 BOX Memory: KINGMAX 4096MB DDR3 1333MHz KIT Video card: GIGABYTE GV-R685OC-1GD HD6850 1GB GDDR5 PCIE HDD: SEAGATE 500GB Barracuda 7200rpm 16MB SATA3 ST500DM002 I am using Windows 7 64 bit. Thanks a lot in advance!

    Read the article

  • "Access is Denied" when executing application from Command Prompt

    - by xpda
    Today when I tried to run an old DOS utility from the XP Command prompt, I got the message "Access is Denied." Then I found that most of the DOS utilities would not run, even though I have "full control" over them. They worked just fine a few weeks ago, and I have not made any OS changes other than Windows Upgrades. Then I tried running edlin.exe and edit.com from the Windows\system32 folder. Same result - "Access is Denied." I tried running these applications from Windows Explorer and got the message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I am logged in as a member of Administrators and have full control over these files. I tried logging in as THE Administrator, with no change. I checked the security settings on the files, and have full control over all of them. I have tried copying the files to different drives, booting in safe mode, and running without antivirus and firewall, all with no change. Does anybody know what could cause this?

    Read the article

  • Does using a hexacore CPU make sense?

    - by Exa
    I'm currently planning to upgrade my computer system and I want to exchange CPU, board and RAM. I already had a look at some hexacore-CPUs from AMD and would like to know if it makes any sense to use such a CPU with six cores. Is there any software which really uses six cores? Especially in gaming? I'm using this PC mostly for gaming and from time to time for developing. I know that on the dual-core system (2 x 3GHz) I currently use, Visual Studio creates two instances of the compiler, one for each core. Would there be six instances of the compiler on a hexacore system for super fast compiling? Is there any software that uses six cores? Would running two applications cause the usage of more CPUs? (For example two CPUs for a game you're playing while two other CPUs are used for compiling at the same time) I hope someone can point out the benefits of a hexacore system. The OS would be Windows 7 64 Bit and I use the PC for gaming most of the time. (Crysis 2, CoD, stuff like that)

    Read the article

  • Understanding Authorized Access to your Google Account

    - by firebush
    I'm having trouble understanding what I'm am granting to sites when they have "Authorized Access to my Google Account." This is how I see what has authorized access: Log into gmail. Click on the link that is my name in the upper-right corner, and from the drop-down select Account. From the list of links to the left, select Security. Click on Edit next to Authorized applications and sites. Authenticate again. At the top of the page, I see a set of sites that have authorized access to my account in various ways. I'm having trouble finding out information about what is being told to me here. There's no "help" link anywhere on the page and my Google searches are coming up unproductive. From the looks of what I see there, Google has access to my Google calendar. I feel comfortable about that, I think. But other sites have authorization to "Sign in using your Google account". My question is, what exactly does that authorization mean? What do the sites that have authorization to "Sign in using my Google account" have the power to do? I hope that this simply means that they authorize using the same criterion that gmail does. I assume that this doesn't grant them the ability to access my email. Can someone please calm my paranoia by describing (or simply pointing me to a site that describes) what these terms mean exactly? Also, if you have any thoughts about the safety of this feature, please share. Thanks!

    Read the article

  • Is it okay to use an administrator account for everyday use if UAC is on?

    - by Valentin Radu
    Since I switched to Windows 7 about 3 years ago, and now using Windows 8.1, I have become familiar with the concept of User Account Control and used my PC the following way: a standard account which I use for every day work and the built-in Administrator account activated and used only to elevate processes when they request so, or to ”Run as administrator” applications when I need to. However, recently after reading more about User Account Control, I started wondering if my way of working is good? Or should I use an administrator account for every day work, since an administrator account is not elevated until requested by apps, or until I request so via the ”Run as administrator” option? I am asking this because I read somewhere that the built-in Administrator account is a true administrator, by which I mean UAC doesn't pop up when logged in within it, and I am scared of not having problems when potential malicious software come into scene. I have to mention that I do not use it on a daily basis, just when I need to elevate some apps. I barely log in into it 10 times a year... So, how's better? Thanks for your answers! And Happy New Year, of course! P.S. I asked this a year ago (:P) and I think I should reiterate it: is an administrator account as safe these days as a standard account coupled with the built-in Administrator account when needed?

    Read the article

  • Writing xml with powershell

    - by alex
    i have a script that get all the info i need about my SharePoint farm : [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") > $null $farm = [Microsoft.SharePoint.Administration.SPFarm]::Local $websvcs = $farm.Services | where -FilterScript {$_.GetType() -eq [Microsoft.SharePoint.Administration.SPWebService]} $webapps = @() foreach ($websvc in $websvcs) { write-output "Web Applications" write-output "" foreach ($webapp in $websvc.WebApplications) { write-output "Webapp Name -->"$webapp.Name write-output "" write-output "Site Collections" write-output "" foreach ($site in $webapp.Sites) { write-output "Site URL --> -->" $site.URL write-output "" write-output "Websites" write-output "" foreach ($web in $site.AllWebs) { write-output "Web URL --> --> -->" $web.URL write-output "" write-output "Lists" write-output "" foreach ($list in $web.Lists) { write-output "List Title --> --> --> -->" $list.Title write-output "" } foreach ($group in $web.Groups) { write-output "Group Name --> --> --> -->" $group.Name write-output "" foreach ($user in $group.Users) { write-output "User Name --> --> --> -->" $user.Name write-output "" } } } } } } i want to make the output to an XML file and then connect the xml file to HTML and make a site of it for manager use how can i do it ? thanks for the help !

    Read the article

  • Why can't I mount an image hosted on a read-only HFS+ partition via Boot Camp?

    - by deceze
    I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

    Read the article

< Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577  | Next Page >