Search Results

Search found 2347 results on 94 pages for 'slightly frustrated'.

Page 58/94 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• WebCenter Content Web Search Performance: Do you really need that folder path info?

  - by Nicolas Montoya

  End-users want content at their fingertips at the speed of thought if possible. When running search operations in the WebCenter Conter Web Interface every second or fraction of a second improvement does matter. When doing some trace analysis on the systemdatabase tracing on a customer environment, we came across some SQL queries that were unnecessarily being triggered! These were related to determining the folder path for every entry part of the search result set. However, this folder path was not even being used as part of the displayed information in the user interface.Why was the folder path information being collected when it was not even displayed in the UI? We found that the configuration parameter 'FolderPathInSearchResults' was set to 'true' under Administration > Admin Server > General Configuration > Additional Configuration Variables as shown below:When executing a quicksearch by keyword we were getting 100 out of 2280 entries in the first page of the result set.When thera 'FolderPathInSearchResults' configuration parameter is set to 'true', the following queries appear in the systemdatabase tracing:100 executions for a query on the FolderFiles table for each of the documents displayed in the first page:>systemdatabase/6       12.13 11:17:48.188      IdcServer-199   1.45 ms. SELECT * FROM FolderFiles WHERE dDocName='SLC02VGVUSORAC140641' AND fLinkRank=0[Executed. Returned row(s): true]382 executions for a query of the folders tables - most of the documents that match the keyword criteria are at a folder depth level of three or four:>systemdatabase/6       12.13 11:17:48.114      IdcServer-199   2.57 ms. SELECT FolderFolders.*,FolderMetaDefaults.* FROM FolderFolders,FolderMetaDefaults WHERE FolderFolders.fFolderGUID=FolderMetaDefaults.fFolderGUID(+) AND((FolderFolders.fFolderGUID = '1EB8E527E19B09ED3FE82EE310AEA13A' ) )[Executed.Returned row(s): true]By setting this 'FolderPathInSearchResults' configuration parameter to 'false', the above queries were no longer reported in the Server Output System Audit Information.Now, let's consider a practical scenario:Search result set page = 100Average folder depth der document in the search result set: 5The number of folder path related queries will be: 100 + 5*500 = 600If each query takes slightly over 3 ms. You would have 2000 ms (2 seconds) spent in server time to get this information.The overall performance impact goes beyond seerver time execution, as this information needs to travel from the server to the browser. If the documents are further nested into the folder hierarchy, additional hundreds of queries may be executed. If folder path is not being displayed in the end-user interface profile, your system may be better of with the 'FolderPathInSearchResults' configuration parameter disabled.

  Read the article

• Modelling highly specific business requirements

  - by AndyBursh

  How can one go about modelling highly specific business requirements, which have no precedent in the system? Take for example the following requirement: When a purchase order contains N lines, is over X value in total and is being recorded against project Y, an email needs to be sent to persons A and B with the details This requirement supplements other requirements surrounding purchase orders, but comes in at a much later date in response to some ongoing problem elsewhere in the business. Persons A and B are not part of any role or group in the system, and don't hold any specific responsibility; they are simply the two people the business has appointed to receive these emails in this very specific case. Projects are also data driven, so project Y has no special properties to distinguish it from any other project. The only way to identify it is to compare its identifier to a magic number. How can one go about modelling this kind of case without introducing too much additional complexity? That I can think of right now, there are a couple of options. Perform the checks and actions inline with the existing code. Here we find the correct spot in the code, check the conditions in the requirement and send the emails to hardcoded addresses. Of course this is fraught with issues. At the very least it stops working if one of these people leaves or changes their email address. At worst you have to ensure that any tests and test data are aware that additional actions are taken for a specific set of criteria. Introduce some form of events system. Here we introduce an eventing system, so that we might react to some event, and fulfil the requirement outside of the usual path of execution. This sounds like a cleaner solution than option 1, but the work involved is ultimately probably slightly overkill for this one small requirement. That said, having it in place does allow the system to handle these kinds of specific requirements consistently and easily in the future. Are there any other (good/better) ways of handling highly specific requirements? I mean other than telling the other parts of the business no!

  Read the article

• (SOLVED) Problems Rendering Text in OpenGL Using FreeType

  - by Sean M.

  I've been following both the FreeType2 tutorial and the WikiBooks tuorial, trying to combine things from them both in order to load and render fonts using the FreeType library. I used the font loading code from the FreeType2 tutorial and tried to implement the rendering code from the wikibooks tutorial (tried being the keyword as I'm still trying to learn model OpenGL, I'm using 3.2). Everything loads correctly and I have the shader program to render the text with working, but I can't get the text to render. I'm 99% sure that it has something to do with how I cam passing data to the shader, or how I set up the screen. These are the code segments that handle OpenGL initialization, as well as Font initialization and rendering: //Init glfw if (!glfwInit()) { fprintf(stderr, "GLFW Initialization has failed!\n"); exit(EXIT_FAILURE); } printf("GLFW Initialized.\n"); //Process the command line arguments processCmdArgs(argc, argv); //Create the window glfwWindowHint(GLFW_SAMPLES, g_aaSamples); glfwWindowHint(GLFW_CONTEXT_VERSION_MAJOR, 3); glfwWindowHint(GLFW_CONTEXT_VERSION_MINOR, 2); g_mainWindow = glfwCreateWindow(g_screenWidth, g_screenHeight, "Voxel Shipyard", g_fullScreen ? glfwGetPrimaryMonitor() : nullptr, nullptr); if (!g_mainWindow) { fprintf(stderr, "Could not create GLFW window!\n"); closeOGL(); exit(EXIT_FAILURE); } glfwMakeContextCurrent(g_mainWindow); printf("Window and OpenGL rendering context created.\n"); glClearColor(0.2f, 0.2f, 0.2f, 1.0f); //Are these necessary for Modern OpenGL (3.0+)? glViewport(0, 0, g_screenWidth, g_screenHeight); glOrtho(0, g_screenWidth, g_screenHeight, 0, -1, 1); //Init glew int err = glewInit(); if (err != GLEW_OK) { fprintf(stderr, "GLEW initialization failed!\n"); fprintf(stderr, "%s\n", glewGetErrorString(err)); closeOGL(); exit(EXIT_FAILURE); } printf("GLEW initialized.\n"); Here is the font file (it's slightly too big to post): CFont.h/CFont.cpp Here is the solution zipped up: [solution] (https://dl.dropboxusercontent.com/u/36062916/VoxelShipyard.zip), if anyone feels they need the entire solution. If anyone could take a look at the code, it would be greatly appreciated. Also if someone has a tutorial that is a little more user friendly, that would also be appreciated. Thanks.

  Read the article

• Second Monitor stays black/in power save mode

  - by Rob

  I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1. The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode. When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them. On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally: xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal sleep 2 xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal This workaround stop working after the update to 13.04, and now i'm looking for a new solution. Has anyone experienced something similarity? xrandr output: Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192 DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 72.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G96 [GeForce 9500 GS] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nouveau latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff Thanks for your help!

  Read the article

• Changing Your Design for Testability

  Sometimes I come across a way of putting something that it is pithy good, not Hallmark trite, but an impactful and concise way of clarifying a previously obscure concept. A recent one of these happy occurrences was when I was reading the excellent Art of Unit Testing by Roy Osherove. After going through the basics of why youd want to test code and how to do it, Roy confronts a frequent objection to having unit tests, that it ends up changing how you design your components: When we write unit tests for our code, we are adding another end user (the test) to the object model. That end user is just as important as the original one, but it has different goals when using the model.  The test has specific requirements from the object model that seem to defy the basic logic behind a couple of object-oriented principles, mainly encapsulation. [emphasis added by me] When I read this, something clicked for me. I used to find it persuasive that because unit tests caused you to change your design they were more disruptive than they were worth. The counter argument I heard is that the disruption was OK, because testable design was just obviously better. That argument was not convincing as it seemed like delusional arrogance to suggest that any one of type of design was just inherently better for the particular applications I was building. What was missing was that I was not thinking of unit tests as an additional and equal end user to my design. If I accepted that proposition, than it was indeed obvious that a testable design was better because now all users of my component would be satisfied. Have I accepted that proposition? Id phrase it slightly different. I find more and more that having unit tests helps me write better, less buggy code before it gets to production or QA. As I write more unit tests, it gets easier to see how to create testable components, so I dont feel like its taking me as much extra time up front. I pick and choose components that seem most likely to benefit from automated tests and it is working out nicely. If you already implement Test Driven Development, this whole post was probably a waste of your time <g> If you hate the idea of unit tests, well, probably not a great value prop for you either. However, if you are somewhere in between, at least take a minute and check out a sample chapter from Roys book at: http://www.manning.com/osherove/.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Why can't the IT industry deliver large, faultless projects quickly as in other industries?

  - by MainMa

  After watching National Geographic's MegaStructures series, I was surprised how fast large projects are completed. Once the preliminary work (design, specifications, etc.) is done on paper, the realization itself of huge projects take just a few years or sometimes a few months. For example, Airbus A380 "formally launched on Dec. 19, 2000", and "in the Early March, 2005", the aircraft was already tested. The same goes for huge oil tankers, skyscrapers, etc. Comparing this to the delays in software industry, I can't help wondering why most IT projects are so slow, or more precisely, why they cannot be as fast and faultless, at the same scale, given enough people? Projects such as the Airbus A380 present both: Major unforeseen risks: while this is not the first aircraft built, it still pushes the limits if the technology and things which worked well for smaller airliners may not work for the larger one due to physical constraints; in the same way, new technologies are used which were not used yet, because for example they were not available in 1969 when Boeing 747 was done. Risks related to human resources and management in general: people quitting in the middle of the project, inability to reach a person because she's on vacation, ordinary human errors, etc. With those risks, people still achieve projects like those large airliners in a very short period of time, and despite the delivery delays, those projects are still hugely successful and of a high quality. When it comes to software development, the projects are hardly as large and complicated as an airliner (both technically and in terms of management), and have slightly less unforeseen risks from the real world. Still, most IT projects are slow and late, and adding more developers to the project is not a solution (going from a team of ten developer to two thousand will sometimes allow to deliver the project faster, sometimes not, and sometimes will only harm the project and increase the risk of not finishing it at all). Those which are still delivered may often contain a lot of bugs, requiring consecutive service packs and regular updates (imagine "installing updates" on every Airbus A380 twice per week to patch the bugs in the original product and prevent the aircraft from crashing). How can such differences be explained? Is it due exclusively to the fact that software development industry is too young to be able to manage thousands of people on a single project in order to deliver large scale, nearly faultless products very fast?

  Read the article

• More elegant way to avoid hard coding the format of a a CSV file?

  - by dsollen

  I know this is trivial issue, but I just feel this can be more elegant. So I need to write/read data files for my program, lets say they are CSV for now. I can implement the format as I see fit, but I may have need to change that format later. The simply thing to do is something like out.write(For.getValue()+","+bar.getMinValue()+","+fi.toString()); This is easy to write, but obviously is guilty of hard coding and the general 'magic number' issue. The format is hard-coded, requires parsing of the code to figure out the file format, and changing the format requires changing multiple methods. I could instead have my constants specifying the location that I want each variable to be saved in the CSV file to remove some of the 'magic numbers'; then save/load into the an array at the location specified by the constants: int FOO_LOCATION=0; int BAR_MIN_VAL_LOCATION=1; int FI_LOCATION=2 int NUM_ARGUMENTS=3; String[] outputArguments=new String[NUM_ARGUMENTS]; outputArguments[FOO_LOCATION] = foo.getValue(); outputArgumetns[BAR_MIN_VAL_LOCATION] = bar.getMinValue(); outptArguments[FI_LOCATOIN==fi.toString(); writeAsCSV(outputArguments); But this is...extremely verbose and still a bit ugly. It makes it easy to see the format of existing CSV and to swap the location of variables within the file easily. However, if I decide to add an extra value to the csv I need to not only add a new constant, but also modify the read and write methods to add the logic that actually saves/reads the argument from the array; I still have to hunt down every method using these variables and change them by hand! If I use Java enums I can clean this up slightly, but the real issue is still present. Short of some sort of functional programming (and java's inner classes are too ugly to be considered functional) I still have no obvious way of clearly expressing what variable is associated with each constant short of writing (and maintaining) it in the read/write methods. For instance I still need to write somewhere that the FOO_LOCATION specifies the location of foo.getValue(). It seems as if there should be a prettier, easier to maintain, manner for approaching this? Incidentally, I'm working in java at the moment, however, I am interested conceptually about the design approach regardless of language. Some library in java that does all the work for me is definitely welcome (though it may prove more hassle to get permission to add it to the codebase then to just write something by hand quickly), but what I'm really asking is more about how to write elegant code if you had to do this by hand.

  Read the article

• Rending 2D Tile World (With Player In The Middle)

  - by Mick

  What I have at the moment is a series of data structures I'm using, and I would like to render the world onto the screen (just the visible parts). I've actually already done this several times (lots of rewrites), but it's a bit buggy (rounding seems to make the screen jump ever so slightly every x tiles the player walks past). Basically I've been confusing myself heavily on what I feel should be a pretty simple problem... so here I am asking for some help! OK! So I have a 50x50 array holding the tiles of the world. I have the player position as 2 floats, x ([0, 49]) and y ([0, 49]) in that array. I have the application size exactly in pixels (x and y). I have an arbitrary TILE_SIZE static int (based on screen pixels). What I think is heavily confusing me is using a 2d orthogonal projection in opengl which maps (0,0) to the top left of the screen and (SCREEN_SIZE_X, SCREEN_SIZE_Y) to the bottom right of the screen. gl.glMatrixMode(GL.GL_PROJECTION); gl.glLoadIdentity(); glu.gluOrtho2D(0, getActualWidth(), getActualHeight(), 0); gl.glMatrixMode(GL.GL_MODELVIEW); gl.glLoadIdentity(); The map tiles are set so that the (0,0) in the array is the bottom left. And the player has to be in the middle on the screen (SCREEN_SIZE_X/2, SCREEN_SIZE_Y/2). What I've been doing so far is trying to render 1-2 tiles more all around what would be displayed on the screen so that I don't have to worry about figuring out rendering half a tile from the top left, depending where the player is. It seems like such an easy problem but after spending about 40+hours on it rewriting it many times I think I'm at a point where I just can't think clearly anymore... Any help would be appreciated. It would be great if someone can provide some very basic pseudo code on keeping the player in the middle when your projection is mapped to screen coordinates and only rendering basically the tiles that you would be any be see. Thanks!

  Read the article

• Can't change color of sprites in unity

  - by Aceleeon

  I would like to create a script that targets a 2d sprite "enemy" and changes their color to red (slightly opaque red if possible) when you hit tab. I have this code from a 3d tutorial hoping the transition would work. But it does not. I only get the script to cycle the enemy tags but never changes the color of the sprite. I have the code below I'm very new to coding, and any help would be FANTASTIC! HELP! hahah. TL;DR Cant get 3d color targeting to work for 2D. Check out the c#code below using UnityEngine; using System.Collections; using System.Collections.Generic; public class Targetting : MonoBehaviour { public List targets; public Transform selectedTarget; private Transform myTransform; // Use this for initialization void Start () { targets = new List(); selectedTarget = null; myTransform = transform; AddAllEnemies(); } public void AddAllEnemies() { GameObject[] go = GameObject.FindGameObjectsWithTag("Enemy"); foreach(GameObject enemy in go) AddTarget(enemy.transform); } public void AddTarget(Transform enemy) { targets.Add(enemy); } private void SortTargetsByDistance() { targets.Sort(delegate(Transform t1,Transform t2) { return Vector3.Distance(t1.position, myTransform.position).CompareTo(Vector3.Distance(t2.position, myTransform.position)); }); } private void TargetEnemy() { if(selectedTarget == null) { SortTargetsByDistance(); selectedTarget = targets[0]; } else { int index = targets.IndexOf(selectedTarget); if(index < targets.Count -1) { index++; } else { index = 0; } selectedTarget = targets[index]; } } private void SelectTarget() { selectedTarget.GetComponent().color = Color.red; } private void DeselectTarget() { selectedTarget.GetComponent().color = Color.blue; selectedTarget = null; } // Update is called once per frame void Update() { if(Input.GetKeyDown(KeyCode.Tab)) { TargetEnemy(); } } }

  Read the article

• How do you conquer the challenge of designing for large screen real-estate?

  - by Berin Loritsch

  This question is a bit more subjective, but I'm hoping to get some new perspective. I'm so used to designing for a certain screen size (typically 1024x768) that I find that size to not be a problem. Expanding the size to 1280x1024 doesn't buy you enough screen real estate to make an appreciable difference, but will give me a little more breathing room. Basically, I just expand my "grid size" and the same basic design for the slightly smaller screen still works. However, in the last couple of projects my clients were all using 1080p (1920x1080) screens and they wanted solutions to use as much of that real estate as possible. 1920 pixels across provides just under twice the width I am used to, and the wide screen makes some of my old go to design approaches not to work as well. The problem I'm running into is that when presented with so much space, I'm confronted with some major problems. How many columns should I use? The wide format lends itself to a 3 column split with a 2:1:1 split (i.e. the content column bigger than the other two). However, if I go with three columns what do I do with that extra column? How do I make efficient use of the screen real estate? There's a temptation to put everything on the screen at once, but too much information actually makes the application harder to use. White space is important to help make sense of complex information, but too much makes related concepts look too separate. I'm usually working with web applications that have complex data, and visualization and presentation is key to making sense of the raw data. When your user also has a large screen (at least 24"), some information is out of eye sight and you need to move the pointer a long distance. How do you make sure everything that's needed stays within the visual hot points? Simple sites like blogs actually do better when the width is constrained, which results in a lot of wasted real estate. I kind of wonder if having the text box and the text preview side by side would be a big benefit for the admin side of that type of screen? (1:1 two column split). For your answers, I know almost everything in design is "it depends". What I'm looking for is: General principles you use How your approach to design has changed I'm finding that i have to retrain myself how to work with this different format. Every bump in resolution I've worked through to date has been about 25%: 640 to 800 (25% increase), 800 to 1024 (28% increase), and 1024 to 1280 (25% increase). However, the jump from 1280 to 1920 is a good 50% increase in space--the equivalent from jumping from 640 straight to 1024. There was no commonly used middle size to help learn lessons more gradually.

  Read the article

• Is this an effective monetization method for an Android game? [on hold]

  - by Matthew Page

  The short version: I plan to make an Android puzzle game where the user tries to get 3-6 numbers to their predetermined goal numbers. The free version of the app will have three predetermined levels (easy, medium, hard). The full version ($0.99, probably) will have a level generator where there will be unlimited easy, medium, or hard levels, as well as a custom difficulty option where users can set specific vales to the number of numbers to equate to their goal, the number of buttons to use, etc. Users will also have the option to get a one-time "hint" for a fee of $0.49, or unlimited hints for a one-time fee of $2.99. The long version: Mechanics of Game and Victory The application is a number puzzle. When the user begins a new game, depending on the input by the user, between 3 and 6 numbers show up on the top of the screen, and between 3 and 6 buttons show up on the bottom of the screen. The buttons all have two options: to increase every number the same way, or decrease every number the same way. The buttons either use addition / subtraction, multiplication / division, or exponents / roots, all depending on the number displayed on the button. Addition buttons are green, multiplication buttons are blue, and exponential buttons are red. The user wins when all of the numbers displayed on the screen equate to their goal number, displayed below each number. Monetization If the user is playing the full (priced) version of the app, upon the start of the game, the user will be confronted with a dialogue asking for the number of buttons and the number of numbers to equate in the game. Then, based on the user input, a random puzzle will be generated. If the user is playing the free version of the app, the user will be asked to either play an “easy”, “hard”, or “expert” puzzle. A pre-determined puzzle from each category will be used in the game. If the user has played that puzzle before, a dialogue will show saying this to the user and advertising the full version of the app. The full version of the app will also be advertised upon the successful or in successful completion of a puzzle. Upon exiting this advertisement, another full screen advertisement will appear from a third party. Also, the solution to the puzzle should be stored by the program, and if the user pays a small fee, he/she can see a hint to the solution to the program. In the free version of the app, the user may use their first hint for free. Also, the user can use unlimited hints for a slightly larger fee. Is this an effective monetization method?

  Read the article

• How can I cleanly and elegantly handle data and dependancies between classes

  - by Neophyte

  I'm working on 2d topdown game in SFML 2, and need to find an elegant way in which everything will work and fit together. Allow me to explain. I have a number of classes that inherit from an abstract base that provides a draw method and an update method to all the classes. In the game loop, I call update and then draw on each class, I imagine this is a pretty common approach. I have classes for tiles, collisions, the player and a resource manager that contains all the tiles/images/textures. Due to the way input works in SFML I decided to have each class handle input (if required) in its update call. Up until now I have been passing in dependencies as needed, for example, in the player class when a movement key is pressed, I call a method on the collision class to check if the position the player wants to move to will be a collision, and only move the player if there is no collision. This works fine for the most part, but I believe it can be done better, I'm just not sure how. I now have more complex things I need to implement, eg: a player is able to walk up to an object on the ground, press a key to pick it up/loot it and it will then show up in inventory. This means that a few things need to happen: Check if the player is in range of a lootable item on keypress, else do not proceed. Find the item. Update the sprite texture on the item from its default texture to a "looted" texture. Update the collision for the item: it might have changed shape or been removed completely. Inventory needs to be updated with the added item. How do I make everything communicate? With my current system I will end up with my classes going out of scope, and method calls to each other all over the place. I could tie up all the classes in one big manager and give each one a reference to the parent manager class, but this seems only slightly better. Any help/advice would be greatly appreciated! If anything is unclear, I'm happy to expand on things.

  Read the article

• Hierachies....from the Top Down

  - by Joe G

  I've been struggling with how to write on the topic of the importance of hierarchy design.  It's not so much that hierarchies haven't always been important, it's more of that with Fusion, the timing of when the hierarchies are designed should take a higher priority.    I will attempt to explain..... When I was implementing applications, back in the day, we had the list of detailed account values to enter with the obvious parent accounts. Then, after the setup was complete and things were functioning, the reporting phase started.  Users explained the elements that they want on the reports, what totals should be included, and how things should be compared.  Frequently, there was at least one calculation that became a nightmare either because it was based on very specific things that didn't relate to anything else or because it was "hardcoded" so that when something changed, someone need to "fix" the report. With Fusion, the process changes slightly.  You still want to enter all of the detailed accounts, but before you start adding parent values, you should investigate the reporting requirements from the top-down.  It's better to build hierarchies based on the reporting requirements than it is to build reports based on random hierarchies. Build reports based on hierarchies that resemble the reports themselves, and maintain the hierarchies without rework of the reports. For example, if you look at an income statement, you may have line items for Material Costs, Employee Costs, Travel & Entertainment, and Total Operating Expenses.  In your hierarchy, you have detail values that roll up to Material Costs, Employee Costs, and Travel & Entertainment which roll up to Total Operating Expenses. Balances are stored automatically in the cube for each of these.  When you define the report, you pick each of these members - no calculations required.  If a new detail value is added, you simply add it to the hierarchy, and there is no need to modify the report. I realize that there are always exceptions that require special handling, but I am confident that you will end up with much fewer exceptions if you make reporting a priority and design your hierarchies from the top-down.

  Read the article

• Play Framework Plugin for NetBeans IDE (Part 2)

  - by Geertjan

  After I published part 1 of this series, the first external contribution (i.e., not by me) to the NetBeans plugin for Play Framework 2 was committed today. Yann D'Isanto added support for creating new Play projects: That completely solves a problem I was working on, in a different way altogether. I was working on creating a new wizard that would call "play new" on the command line and pass into the command line the entered name and application type (1 for Java and 2 for Scala). However, Yann's solution is better, at least in the sense in that it works, as opposed to mine which didn't, because of problems I continually had with the command line, since one needs to press Enter multiple times on the Play command line when creating new projects, which I wasn't able to simulate in my new wizard. Yann's approach is simply to follow the approach taken in the Project Type Module Tutorial, which explains how to register a project sample in the IDE. I was inspired by Yann's contribution, especially when he mentioned that one needs to build Play projects on the command line. So, I added a new menu item on the right-click of a project for building Play projects, which simply passes "play compile" to the command line for the current project: Via the IDE's main menu bar, you can also Build and Run the application, though the code for the Clean function needs to be added still, which would be a cool thing for anyone out there to add, by using all the existing code and then passing "play clean compile" to the command line. Something else that Yann added is an Options Window extension, thanks to the Options Window Module Tutorial, for registering the Play installation, which is a step forward from my hard coded solution. I changed things slightly so that, when Build or Run are selected, without a Play installation being defined, the Options window opens, displaying the tab that Yann created, shown below. Notice that there's no Browse button, which would be a simple next step for anyone else to contribute. A small tip is to use the FileChooserBuilder from the NetBeans IDE APIs when working on the Browse button: Looking forward to more contributions to the Play Framework 2 plugin for NetBeans IDE. Just leave a message here with your ideas, with your java.net name, and then I'll add you to the project on java.net, where I very much look forward to your contributions: http://java.net/projects/nbplay/sources/nbplay

  Read the article

• How best to look up objects by label?

  - by dsollen

  I am writing the server backed by a pre-written API. I'm going to get a number of strings representing ports, signals, paths, etc etc etc. I need to look up the object associated with a given label, these objects are all in memory (no sql magic to do this for me). My question is, how best do I associate a given unique label with the mutable object it represents? I have enough objects that looking through every signal or every port to find the one that matches is possible, but may be slightly too slow. To be honest the direct 'look at every object' method is probably good enough for so small a body of objects and anything else is premature optimization, but I still am curious what the proper solution would be if I thought my signals were going to grow a bit larger. As I see it there are two options available. First would be to to create a 'store' that is a simple map between object and label. I could have it so that every time I call addObject the object is automatically saved into a hashmap or the like. This works, but relies on my properly adding and deleting each object so the map doesn't grow indefinitely. The biggest issue to me is that this involves having some hidden static map in my ModelObject class that just feels...wrong somehow. The other option is to have some method that can interpret the labels. All of these labels are derived from the underlying objects. So I can look at the signal label, for instance, and say "these 20 characters are the port" to figure out what port I need. This would allow me to quickly figure out what I need. However, if the label method is changed the translateLabelToObject method needs to be updated as well or everything breaks. Which solution is cleaner, or possibly a cleaner solution than either of above? For the record I'm working with sufficient number of variables to make direct comparison a little slow, but not enough to be concerned about memory overhead, written in java. All objects that have labels I need to look up extend the same parent class.

  Read the article

• Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

  - by IcarusNM

  I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

  Read the article

• Is it smart to take a year off from school to get experience?

  - by user134147

  firstly I apologize if this question is not appropriate for the site, but I've seen other similar (though slightly deviant) questions on this sight before and I know the people here are the most qualified to answer my question. Anyways, I'm currently between my sophomore and junior years at a 4 year university, and after a bit of deliberation I've decided on computer science as a major (BA, by the way, as a BS would require me to stay at least an extra year the way our program is set up). I've been interested now in programming for a few months and I've developed a passion for it in a very short time. I began learning C++, migrating to Java recently when I learned my school focuses on this language. Now, I should mention that the concept of higher education has never sat well with me, so part of my motivation for wanting to take time off is to truly challenge myself and see what I can accomplish when I actually try at something. The autodidact in me finds it difficult to focus on my passions while trying to keep a high GPA in unrelated classes. However, I understand the times we live in and therefore would plan to complete my degree after this year. So my question is whether or not the skills I learn in a year off from college could justify the time off from school. Unfortunately, I don't believe I know enough yet to gain any professional experience (internship, etc.) so I would mostly focus my time on learning Java and another language, possibly Wordpress (to gain an understanding of web programming concepts as I have not yet decided what field I want to get into, and to make some money to fund my off-year), and to delve into security concepts, which also interest me. I'm hoping I could work on projects, such as simple applications or contributions to open source software during this time to enhance my resume once I do finish school, so I can find a job out of college easier. I do not want to be the new hire who knows nothing beyond the concepts of his Java textbooks. Does anyone have any input about these thoughts of mine, or any ideas for where I should focus my studies or how high I might set the bar for my work? Thanks a lot everyone!

  Read the article

• How should I refactor switch statements like this (Switching on type) to be more OO?

  - by Taytay

  I'm seeing some code like this in our code base, and want to refactor it: (Typescript psuedocode follows): class EntityManager{ private findEntityForServerObject(entityType:string, serverObject:any):IEntity { var existingEntity:IEntity = null; switch(entityType) { case Types.UserSetting: existingEntity = this.getUserSettingByUserIdAndSettingName(serverObject.user_id, serverObject.setting_name); break; case Types.Bar: existingEntity = this.getBarByUserIdAndId(serverObject.user_id, serverObject.id); break; //Lots more case statements here... } return existingEntity; } } The downsides of switching on type are self-explanatory. Normally, when switching behavior based on type, I try to push the behavior into subclasses so that I can reduce this to a single method call, and let polymorphism take care of the rest. However, the following two things are giving me pause: 1) I don't want to couple the serverObject with the class that is storing all of these objects. It doesn't know where to look for entities of a certain type. And unfortunately, the identity of a type of ServerObject varies with the type of ServerObject. (So sometimes it's just an ID, other times it's a combination of an id and a uniquely identifying string, etc). And this behavior doesn't belong down there on those subclasses. It is the responsibility of the EntityManager and its delegates. 2) In this case, I can't modify the ServerObject classes since they're plain old data objects. It should be mentioned that I've got other instances of the above method that take a parameter like "IEntity" and proceed to do almost the same thing (but slightly modify the name of the methods they're calling to get the identity of the entity). So, we might have: case Types.Bar: existingEntity = this.getBarByUserIdAndId(entity.getUserId(), entity.getId()); break; So in that case, I can change the entity interface and subclasses, but this isn't behavior that belongs in that class. So, I think that points me to some sort of map. So eventually I will call: private findEntityForServerObject(entityType:string, serverObject:any):IEntity { return aMapOfSomeSort[entityType].findByServerObject(serverObject); } private findEntityForEntity(someEntity:IEntity):IEntity { return aMapOfSomeSort[someEntity.entityType].findByEntity(someEntity); } Which means I need to register some sort of strategy classes/functions at runtime with this map. And again, I darn well better remember to register one for each my my types, or I'll get a runtime exception. Is there a better way to refactor this? I feel like I'm missing something really obvious here.

  Read the article

• How to unlock and remove a protected partition from Prestigio USB stick?

  - by mr.b

  Ok, so, I have one of those fancy schmancy devices, which is given to me by a frustrated friend of mine. Device is a Prestigio Leather 8GB, which identifies itself to Linux host as: Bus 001 Device 006: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Kernel messages as USB device is plugged in: kernel: [ 2769.580042] usb 1-9: new high speed USB device using ehci_hcd and address 7 kernel: [ 2769.714782] scsi8 : usb-storage 1-9:1.0 kernel: [ 2770.713937] scsi 8:0:0:0: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.714535] scsi 8:0:0:1: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.715734] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 2770.716108] sd 8:0:0:1: Attached scsi generic sg4 type 0 kernel: [ 2770.722175] sd 8:0:0:0: [sdc] 962560 512-byte logical blocks: (492 MB/470 MiB) kernel: [ 2770.722657] sd 8:0:0:0: [sdc] Write Protect is on kernel: [ 2770.731078] sd 8:0:0:1: [sdd] 14012416 512-byte logical blocks: (7.17 GB/6.68 GiB) kernel: [ 2770.731215] sdc: kernel: [ 2770.738251] sd 8:0:0:1: [sdd] Write Protect is off kernel: [ 2770.880328] kernel: [ 2770.885876] sd 8:0:0:0: [sdc] Attached SCSI removable disk kernel: [ 2770.887442] sdd: unknown partition table kernel: [ 2771.049605] sd 8:0:0:1: [sdd] Attached SCSI removable disk So, symptoms are typical for U3-like devices: two separate devices inside of a single flash device. Windows sees it also as two identical usb devices, and mounts two separate drives to system, whereas first one presents itself as a CDROM device, holding a write-protected content, and second is a regular flash-disk partition, that "can" be written to. However, it seems like it's broken in some weird way, since it won't let me write anything to it, format it, nothing, but that's not the issue right now. Question: How can I unlock entire USB stick so it appears to system as a single, 8GB device which can be partitioned and used normally, without restrictions? Since it appeared to be an U3 device, I have tried standard utilities: both U3 Uninstaller by u3.com (found on SoftPedia), and opensource u3_tool from sourceforge (on both Windows and Linux). First utility failed to even detect USB stick as U3 device (simply stood idle while I re-plugged stick several times), while second tool failed with some obscure error about SCSI command unable to do something (I might be able to provide exact errors when I switch back to windows). u3_tool -i /dev/sg3 (Display device info) fails with u3_partition_info() failed: Device reported command failed: status 1 ...and every other option fails with same error, minus first part which states which command precisely has failed. So, apparently, this isn't a U3 device. Or, if it is, it doesn't behave like one. I read on a few occasions that this device protection is done by special command sent to device which tells it to lock itself, and so there should be an unlock command, that would set drive straight. Does anyone have any idea about what could I do to this device to fix it? P.S. I also mentioned a problem with being unable to use second "drive", but I'll tackle that problem when (and if) I manage to merge those two devices into one...

  Read the article

• Is it reasonable that a random disk seek & read costs ~16ms?

  - by fzhang

  I am frustrated about the latency of random reading from a non-ssd disk. Based on results from following test program, it speeds ~16 ms for a random read of just 512 bytes without help of os cache. I tried changing 512 to larger values, such as 25k, and the latency did not increase as much. I guess it is because the disk seek dominates the time. I understand that random reading is inherently slow, but just want to be sure that ~16ms is reasonable, even for non-ssd disk. #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #include <sys/unistd.h> #include <fcntl.h> #include <limits.h> #include <stdio.h> #include <string.h> int main(int argc, char** argv) { int fd = open(argv[1], O_RDONLY); if (fd < 0) { fprintf(stderr, "Failed open %s\n", argv[1]); return -1; } const size_t count = 512; const off_t offset = 25990611 / 2; char buffer[count] = { '\0' }; struct timeval start_time; gettimeofday(&start_time, NULL); off_t ret = lseek(fd, offset, SEEK_SET); if (ret != offset) { perror("lseek error"); close(fd); return -1; } ret = read(fd, buffer, count); if (ret != count) { fprintf(stderr, "Failed reading all: %ld\n", ret); close(fd); return -1; } struct timeval end_time; gettimeofday(&end_time, NULL); printf("tv_sec: %ld, tv_usec: %ld\n", end_time.tv_sec - start_time.tv_sec, end_time.tv_usec - start_time.tv_usec); close(fd); return 0; }

  Read the article

• Rsync: windows 7, synology: login error and permission denied error

  - by loonboon

  Good day to all of you all, I'm running into strange/stupid errors, and I hope anybody would be so kind to help me out. I have to admit, I am by no means a guru, so please bear with me :-) Situation: -Synology NAS (runs Linux), and Windows 7 desktop (1 normal/restricted user Lisa and 1 admin user). - Data from W7 desktop to be rsynced to synology: /volume1/home/Lisa/Backup - Rsync command: c:\cygwin\bin\rsync -avz /cygdrive/e/Lisa/ [email protected]:/volume1/homes/Lisa/Backup - I've set up ssh per these two threads: a. http://www.cesareriva.com/archives/102 b. http://www.cesareriva.com/archives/112 Now the horrors begin: - root is allowed to run the rsync succesfully, however, he doesn't login automatically (so I can not use rsync in W7 batchscripts, which is of course required). - Lisa is allowed to login automatically but he can not succesfully finish the rsync command because of permission errors: rsync change dir /volume1/homes/Lisa/Backup failed: permissions denied. This happens for each and every file and subdir rsync tries to create. However, the main directory (Backup) is created. When I try to copy files from windows explorer to the directory 'Backup' using the very same user Lisa everything goes smoothly. So, obviously, there is a permission problem somewhere; either my rsync-command isn't correct, or the folder permissions for homes/Lisa aren't correct (but, then again, Windows 7 copies files to that folder without any problems, so that does make me believe the homes/Lisa-permissions don't appear to be the problem). I also tried adding: --chmod=Dugo+x --chmod=ugo+r which I found somewhere on the web, to the rsync-command, but this didn't solve any problem and gave the exact errors. Would anybody please please help me on how to fix this? I am utterly frustrated about this, because I have been trying for 1 month to get everything to work and it simply doesn't work. I bought the big Synology to end the horrors of 20 external USB-disks for once and for all (we have many pictures and home vids of our deceased dogs and want to watch these, the horrors being 'what material is on what disk'). I'll gladly return the favour of somebody helping me out by buying you a nice beer (paypal), if you could end my misery. I am not extremely skilled on Linux (not at all :-( ) so if you could give an extra word when possible so I understand what to do, I'd be very grateful. I really hope somebody can help me out, Thank you in advance, Lisa

  Read the article

• Finding underlying cause of Window 7 Account corruption.

  - by Carl Jokl

  I have been having trouble with my Sister's computer which I built. It is running Windows 7 Ultimate x64. The problem is that I have had problems with the accounts becoming corrupted. First problems manifest themselves in the form of Windows saying the profile failed to be loaded properly and a temporary profile. Eventually the account will not allow login at all. An error message along the lines the authentication service failing the login. I have found information about this problem and how to fix it. The problem being that something has corrupted the account profile and backing up and recreating the accounts fixes the problem. I have been able to fix things and get logins working again but over the period of usually about a week it happens again. Bit by bit the accounts corrupt and then it is back to square one. I am frustrated because I don't know what the underlying cause of the problem is i.e. what is causing the accounts to be corrupted in the first place. At the moment I am just treating the symptoms. I was hoping someone who may have more experience with dealing with this problem might be able to help me find the root cause. Some articles suggest that Norton Internet Security is a big culprit of this problem which is installed. I could try uninstalling Norton and see if it helps. The one thing which is different about this computer to any other I have built is that it has a solid state drive. Actually it has both a hard drive and solid state drive. The documents and settings i.e. the Users directory is stored on the hard drive. This was done following an article about moving the user account data onto a separate drive on Windows 7 which I found on the Internet. Moving the User accounts is more of a pain under Windows 7 and this solution involved creating a low level file system link to the folder from the boot drive (Solid State) to the Hard Drive. The idea is that the computer behaves just as if it is accessing the User's folder from the boot drive but actually the data is stored on the hard drive. This may have nothing to do with the cause of the problem but due to the problem being user account corruption it is a possibility I have not been able to rule out. Any help would be appreciated as I would be glad to see the back of this problem.

  Read the article

• Apache won't follow Symlink

  - by Marvin Dickhaus

  I have a LAMP server (Ubuntu 12.10) setup on my development machine. It is a T60 modified with an SSD. The server base is in /var/www. Apache has the following config: DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews SymLinksIfOwnerMatch AllowOverride all Order allow,deny allow from all </Directory> I'm currently developing a SilverStripe CMS featured site. The folder for the server is /var/www/sfk/. The framework and all cms relavant features are in their respective folders. The only folder that need to be modified would be the /var/www/sfk/mysite folder. Because of that I want to keep the mysite folder under my home directory and symlink it into the server folder. So here is what I've done: ln -s ~/sfk/mysite/ /var/www/sfk/ sudo chgrp www-data /var/www/sfk/mysite -R ls tells me the following: /var/www/sfk (exerpt) drwxr-xr-x 3 marvin www-data 4096 Nov 16 16:53 assets drwxr-xr-x 12 marvin www-data 4096 Nov 16 16:53 cms drwxr-xr-x 29 marvin www-data 4096 Nov 16 16:53 framework -rw-r--r-- 1 marvin www-data 2410 Nov 16 16:53 index.php lrwxrwxrwx 1 marvin www-data 24 Nov 20 17:45 mysite -> /home/marvin/sfk/mysite/ -rw-rw-r-- 1 marvin www-data 514 Nov 16 16:55 _ss_environment.php drwxr-xr-x 4 marvin www-data 4096 Nov 16 16:53 themes and ls /var/www/sfk/mysite/ drwxrwxr-x 6 marvin www-data 4096 Nov 16 00:15 code drwxrwxr-x 2 marvin www-data 4096 Nov 16 11:51 _config -rwxrwxr-x 1 marvin www-data 2685 Nov 16 15:39 _config.php drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 css drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 images drwxrwxr-x 2 marvin www-data 4096 Nov 16 00:15 javascript drwxrwxr-x 5 marvin www-data 4096 Nov 16 00:15 templates This is literally the same setup I have on my desktop machine. The problem I have is that the mysite/ folder is just not recognized. I'm thankful for every advice I get. I'm frustrated because I'm stuck with this issue for hours.

  Read the article

• What is the probable failure - no BSOD, no event log, monitors sleeping, force reboot required

  - by Tyler

  Every 3 to 15 days, my PC freezes. This typically happens when the computer is idle, I'm coming home from work, back from vacation, etc. It's never happened while using my computer. The monitors are in power save mode The Caps Lock light on the (wireless) keyboard doesn't work Ctrl-alt-del has no effect, mouse (wireless) has no effect The hardware reset button and single press of power putton have no effect Computer does not appear on the network No BSOD, no memory dump Event logs have no errors or indications of problems near the time of crash. Only messages after reboot indicating that there was a reboot without a clean shutdown. Windows is set to never put the computer to sleep (just the display) Here are the vital stats of the build: OS Windows 8 Pro 64-bit CPU Intel i5-2400 Mobo Intel BOXDP67DE Micro ATX GPU MSI N460GTX Cyclone768D5/OC RAM CORSAIR XMS3 8GB (2 x 4GB) CMX8GX3M2A1333C9 PSU SeaSonic X Series X650 Gold System Drive Samsung 840 Pro 256 GB SSD Data Drive 2 x Western Digital WD20EARS 2TB in hardware RAID 1 Optical Lite-On DVD burner IHAS424-98 And here is the story of how the problem developed and what I've done to diagnose: January 2011, system built with Windows 7 64-bit, runs great. March 2011, Intel replaced the mobo because of the bad sata controllers. October 2012, upgrade to Windows 8 (problems start shortly after). January 2013, system freezes and causes network to fail for the whole house. Unplug the network cable and other devices and PCs can use the internet. Plug it back in, internet goes away for everyone. Reboot and everything is fine. March 2013, install Intel Gigabit CT PCI-E NIC, disable mobo nic in bios. Network strangeness goes away. Freezes are less frequent. Memtest shows no problems (20 passes). Early June 2013, replace Antec PSU with SeaSonic PSU. Mid June 2013, replace OCZ Vertex 2 SSD with Samsung SSD. Late June 2013, get frustrated and hope the community has some good ideas (I'm running out of budget to replace parts). My next plan of attack is setting "Turn off display" to Never and using a screen saver to see how that reacts on the next freeze. It makes me sad to waste power for up to 15 days though. Has anyone out there seen a problem like this? Any ideas on what kind of malfunction would act this way? Ideas of other diagnostic steps to take?

  Read the article

• Windows Backup failed with error 0x807800C5

  - by Alexey Ivanov

  I setup backup of my Windows 8 laptop with Windows 7 File Recovery (known as Backup and Restore in Windows 7). Backup of files runs successfully. But if I try to create system image, it fails with error 0x807800C5: Error details on the dialog: The mounted backup volume is inaccessible. Error details in the system log: There was a failure in preparing the backup image of one of the volumes in the backup set. I save the backup to a network location, WD MyBookLive.   Edit: I tried some of the steps suggested in the various thread about this issue: Cleaned up the backup location: Removed MediaID.bin in the backup location. Removed folder <ComputerName> from WindowsImageBackup. Restarted backup resulted in the same error. However, the error dialog shows slightly different error message: The specified backup disk cannot be found. Performed System File Check by running sfc /scannow. It showed no errors. Running backup failed nevertheless. I tried searching Google for error code but I've found no solution so far. Update: I submitted technical support request to Microsoft. The first suggestion was to clean boot, but it didn't help. I pointed out that I had tried all the methods from the same problem on MS Answers, and nothing had helped.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >