Search Results

Search found 19539 results on 782 pages for 'pretty print'.

Page 583/782 | < Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by Melot

  Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• Two cisco gigabit switches refuse to link to each other. Any idea why?

  - by Prody

  I have 3 Linksys SR2024 switches which are basically non-managed 24 port Gbit + 2 miniGBIC. I now had to add another switch to the network, and my provider didn't have the SR2024 switch anymore, so I got the Cisco SLM2024 which was a bit more expensive. It's pretty much the same thing but with management (that I don't need). So I've connected the SLM2024 to a SR2024 via Cat6 cable, and for some strange reason, I get no link. If I connect any machine with a Gbit NIC to both switches, it links with 1Gbit autonegotiated. If I connect the SLM2024 to a non-Gbit switch (I have a cheap 4port ASUS switch), it will link just fine on 100Mbit full duplex. Since the SLM2024 has management, I've tried to see if something is misconfigured on it's side, but it's not, it advertises 1Gbit and lower. (hence the machines connecting succesfully at 1Gbit). Since the SR2024 that I'm trying to connect it to also connects successfully with another SR2024 and other Gbit machines, it means that it advertises Gbit too. But for some reason when I link the SR2024 to the SLM2024 I get no link. Please note that I've properly tested the wire. Does anyone have any idea what's wrong?

  Read the article

• mysql disk io keeps increasing ... is that normal?

  - by trustfundbaby

  So I've been trying to figure out this disk IO problem I have been having with my linode VPS. Over the last day or two I've just left watch -n1 pidstat -d running in a console window and the output looks like this: Monitoring it over the last few days, I've noticed that my problem lies with the init, searchd, and mysql processes. Searchd is sphinx and all its indexes are on disk, so disk io there is inevitable (apparently). What I can't understand is why the disk reads (kB_rd/s) for mysql refuse to stabilize and just keep going up. It started out at 154 yesterday and is up to what you see in that screen shot. but disk writes (kB_wr/s) have remained pretty constant the entire time. My VPS only has 768MB RAM, my mysql db has a size of about 220MB and after running mysqltuner.pl and reading a bit about it, I've been advised to set my innodb_buffer_pool_size to 220MB but I simply cannot afford to do that ... I have it up to 150MB. My question is twofold. Why does the init process have that much disk reading to do? Why is mysql doing so much disk reading?

  Read the article

• Web shortcuts (.url) not working on Windows 7

  - by jpbochi

  I'm experiencing several symptoms, but I believe they are all related to web link files not working. First, I can't create we link files anymore. When I try New Shortcut and put an URL, I get the following error message: Second, existent shortcuts are not working. The default context menu action (or double-click) is Print, which simply prints an empty page. If I try to see its properties, there's no URL there. Third, IE bookmarks are also not working. One difference is that the default action is Open, IE does nothing when I click it. Adding a new bookmark only creates one more dead link file. I'm almost sure this problem occurred after I tried to install IE 7 on Windows 7. Unfortunately, it didn't work because the OS seems to be bound to IE 8. I already tried to reinstall/repair IE 8, but it made no difference. Does anyone experienced a similar problem? I need a working solution, but I welcome any reasonable suggestion.

  Read the article

• zsh : How to list directory content with tab?

  - by Philippe CM

  I just switched from BASH to ZSH and thing are pretty good, but: when I start typing cd /usr/share/s and hit TAB, this is what I get : $ cd /usr/share/sane/ sane/ skype/ ssl-cert/ screen/ smplayer/ strigi/ seed-gtk3/ snmp/ synaptic/ sgml/ software-properties/ system-config-printer/ sgml-base/ soprano/ sysv-rc/ sgml-data/ sounds/ simple-scan/ splashy/ And this is ok. If I then hit TAB again, I get $ cd /usr/share/screen/, the next candidate, witch is also OK. (BTW, how do I cycle back to the previous candidate? Sorry, on to my question) Now what if I want to see the contents of /usr/share/screen/ now ? You now, BASH-style? The cursor is at the end of the line, will I have to ctrl-a (or home), then del del (to erase cd) then ls then ENTER? That seems like a lot of typing. (And it - possibly unnecessarily - enters the command in the history) Would not there be a key (maybe modifier-TAB? but the obvious candidates are already taken by the desktop... I digress) that would tell zsh to stop cycling through /usr/share/ and instead, just list the content /usr/share/screen/ ?

  Read the article

• Shell script to block proftp failled attempt

  - by Saif

  Hello, I want to filter and block failed attempt to access my proftp server. Here is an example line from the /var/log/secure file: Jan 2 18:38:25 server1 proftpd[17847]: spy1.XYZ.com (93.218.93.95[93.218.93.95]) - Maximum login attempts (3) exceeded There are several lines like this. I would like to block any attempts like this from any IP twice. Here's a script I'm trying to run to block those IPs. tail -1000 /var/log/secure | awk '/proftpd/ && /Maximum login/ { if (/attempts/) try[$7]++; else try[$11]++; } END { for (h in try) if (try[h] > 4) print h; }' | while read ip do /sbin/iptables -L -n | grep $ip > /dev/null if [ $? -eq 0 ] ; then # echo "already denied ip: [$ip]" ; true else logger -p authpriv.notice "*** Blocking ProFTPD attempt from: $ip" /sbin/iptables -I INPUT -s $ip -j DROP fi done how can I select the IP with "awk". with the current script it's selecting "(93.218.93.95[93.218.93.95])" this line completely. But i only want to select the IP.

  Read the article

• Windows Update broke Wirless driver - Can't get it working again

  - by private_meta

  I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

  Read the article

• Exchange 2007 Backup - For a newbie

  - by mew3900

  I am trying to setup an exchange 2007 backup solution. After doing a lot of reading, Microsoft have decided in server 2008 unless you are willing to spend a great deal on a 3rd party solution you are pretty stuck! Essentially what I have been asked to do is perform an off-line file backup of our current exchange server and replicate this onto a new 2nd server. The reasoning behind this is that we need to upgrade our current installation of exchange 2007 to SP2 so that the exchange plug-in for windows server backup will be available to us. From this I can then actually take an exchange aware backup weekly and take it off site. Ideally then also we can migrate to this new server and keep the old one as a fail over. Is there a way I can copy across the files required onto a second server, although I doubt very much it is that simple. I may be barking up completely the wrong tree, however I have very limited knowledge with Exchange and any help and advice on how I would resolve this would be much appreciated. Thanks in advance

  Read the article

• iptables port redirection on Ubuntu

  - by Xi.

  I have an apache server running on 8100. When open http://localhost:8100 in browser we will see the site running correctly. Now I would like to direct all request on 80 to 8100 so that the site can be accessed without the port number. I am not familiar with iptables so I searched for solutions online. This is one of the methods that I have tried: user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 80 -j ACCEPT user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 8100 -j ACCEPT user@ubuntu:~$ sudo iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 8100 It's not working. The site works on 8100 but it's not on 80. If print out the rules using "iptables -t nat -L -n -v", this is what I see: user@ubuntu:~$ sudo iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 redir ports 8100 Chain INPUT (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination The OS is a Ubuntu on a VMware. I thought this should be a simple task but I have been working on it for hours without success. :( What am I missing?

  Read the article

• I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

  - by anonymous

  Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

  Read the article

• Hungry hungry BIOS: why do I have less than 4 GiB of memory?

  - by Rhymoid

  I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

  Read the article

• Optimize Apache performance

  - by Phliplip

  I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

  Read the article

• How to fix missing RAID1 drive

  - by Sodved

  I had to do some fiddling about with my cables inside thebox and now I am getting a "Critical Error" about the RAID disks during startup. I have a gigabyte GA-MA770T-UD3 motherboard. Aparently the RAID controller is an AMD SB710 chip. I'm pretty sure I know what happenned. The first time I rebooted I had forgotten the power cable on one of the disks in the RAID1 (mirror) and let it boot up. So I shut down and put the power back in. So now when it boots up I go into the RAID admin interface (between the BIOS screen and the OS loading): it shows the RAID1 as in error the logical device has one disk and says the other is disconnected or missing the other physical disk shows up as a single disk If I boot to the OS (Windows 7 32 bit) the data all seems to be there. If I go into computer management it says my partition is on a disk and working OK. But the other disk is offline because: "The disk is offline because it has a signature collision with another disk that is online" So I am guessing because I STUPIDLY booted up with only one of the disks powered on, the other disk fell out of synch with the mirror and so now cannot rejoin the mirror. How do I fix this? I want to get the RAID1 mirror working again. There does not appear to be any "Repair" option in the basic RAID admin tool which I get into during startup before the OS boots. I have not made any explicit changes to the online one (but I guess the OS has probably written some admin data).

  Read the article

• Windows XP VM on VMWare ESXi 4.1 "pausing" / blocked occasionally

  - by FelixD

  We have an issue with Windows XP SP3 VMs on VMWare ESXi 4.1.0 (the free version): They sometimes seem to "pause" for several minutes. This happens rarely (maybe once a month per VM, at least noticed only that often), but still is an issue for us. It happens for three different but similar VMs on three pretty different hosts (different hardware). I have the feeling that the "pausing" is not actually the CPU blocking, but probably the harddisks, but not 100% sure. The servers have one IDE disk (C:) and one SCSI (D:) and it might be either of the two. I have seen scheduled tasks simply not starting for up to 9 minutes and then running normally again with normal speed. They were totally blocked. This is not a load issue, the VMWare hosts have average load and the VMs in question already have reserved CPU resources plus high priorities for CPU and disk. The Windows boxes run mainly MySQL, Tomcat, FileZilla server, Cygwin stuff, Java + R applications, VMWare client, Elusiva Terminal Server pro, Nagios client. Not sure if this might be related with any of that software (e.g. Elusiva). Trying to debug this, there was nothing visible in Windows Event log, other logs in C:\Windows, VMWare events etc. Unfortunately the vmware.log file ends with "Log throttled". We found that we ran into 2 VMWare bugs there: The VMWare client writes lots on bogus messages in the vmware.log, which we now disabled (log level error setting) plus the bug that VMWare does not unthrottle the log (at least so far despite VM reboots). I know there is not much guidance and that may also be the reason why I so far didn't find anything related on the web or on ServerFault, but maybe some of this rings a bell with someone? Or please direct me to what more info to post. I hope that the vmware.logs get unthrottled eventually (can't easily restart the hosts at the moment). Thanks for any input!

  Read the article

• upload process times out for different time zones

  - by shilezi

  I have an inhouse(NY) app that cients can upload files to. Usually uploads go pretty quickly for most clients but this particularly cient in the UK always have problems with uploads. not sure if they get any errors but since we log all exceptions, we see this...Error: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.Net.WebException: The operation has timed out at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at ... This shouldn't even be an issue because since we noticed they have had this issue before so we bumped up these to maxRequestLength="2097151" executionTimeout="14400". Further investigating this error, i read that it could be a thread timeout since the default is 20minute. A worker process with process id of serving application pool was shutdown due to inactivity. Application Pool timeout configuration was set to 20 minutes. A new worker process will be started when needed. Problem is I am not entirely sure if that really is the case as all other cients mostly North American, have no issues but then their uploads don't seem to go beyond 80mb and the UK client have done a 700mb upload before that i know of. We have tested 750mb before and the whole process took about 15min for upload and processing. Any help on what the real issue here might be? Thanks.

  Read the article

• Hard Drive problem: is it the SATA controller or the HDD itself?

  - by Drooling_Sheep

  I have a Samsung 1.5TB hard drive hooked up to an ECS H55H-I mini-ITX motherboard. I have XBMC 10 (modified Ubuntu 10.04) installed for use as an HTPC. The hard drive encounters occasional errors during normal use which cause it to be remounted read-only. I have updated the BIOS on the motherboard, changed the SATA cable and moved it to different ports on the motherboard, installed and re-installed the OS (including different versions of XBMC and generic ubuntu), all to no avail. I recently ran tests both with badblocks -sv and smartctl -t long. Both reported no errors. This makes me think the motherboard or SATA controller is probably the issue. Does anyone know of any further tests I can do to help narrow this down? The processor is a Core i3. I forget the model number but it's one of the 32nm ones with on-package graphics. There's no discrete video card or optical drive. The power supply is a 150W Rosewill (pretty sure) that came with the case.

  Read the article

• My server cant resolve domains?

  - by Nuker

  I am on a VPS that is pretty much unmanaged so it means im on my own. I did my best to configure it so i can host my own site for other people to see it online but seems like i have network problems because in the last days many of my users report they cant enter my site from my domain and seems like Google and Facebook cant either (this never happened before). Its weird because i can enter my site without problems and so many other people as well. But then i tried to make a php include and i get this error: Warning: include(): php_network_getaddresses: getaddrinfo failed: Name or service not known in I was told that seems like my server cant resolve domains. The includes work if i use IPs instead of domains. So it means i have a DNS problem or something? What can i do to fix it? Im on a Linux 2.6.32-431.11.2.el6.x86_64 on x86_64 CentOS Linux 6.5 Thank you. EDIT: i have this on my resolv.conf # Generated by NetworkManager # No nameservers found; try putting DNS servers into your # ifcfg files in /etc/sysconfig/network-scripts like so: # # DNS1=xxx.xxx.xxx.xxx # DNS2=xxx.xxx.xxx.xxx # DOMAIN=lab.foo.com bar.foo.com nameserver 8.8.8.8 nameserver 8.8.4.4

  Read the article

• Troubleshooting DTCPing Errors

  - by JimmyP

  So I am running DTC ping between 2 machines on our network and am getting the following error ++++++++++++++++++++++++++++++++++++++++++++++ DTCping 1.9 Report for WEB2 ++++++++++++++++++++++++++++++++++++++++++++++ RPC server is ready ++++++++++++Validating Remote Computer Name++++++++++++ 03-03, 13:39:45.099-->Start DTC connection test Name Resolution: internal-->10.20.3.236-->internal.something 03-03, 13:39:45.114-->Start RPC test (WEB2-->internal) Problem:fail to invoke remote RPC method Error(0x6BA) at dtcping.cpp @303 -->RPC pinging exception -->1722(The RPC server is unavailable.) RPC test failed I have also run RPC ping where I get what I beleive is the same error: C:\Program Files\Windows Resource Kits\Tools>rpcping -s internal Exception 1722 (0x000006BA) Number of records is: 4 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1722 Detection location is 323 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1237 Detection location is 313 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 311 Flags is 0 NumberOfParameters is 3 Long val: 135 Pointer val: 0 Pointer val: 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 318 Flags is 0 NumberOfParameters is 0 I'm pretty sure that the exception number 1722 is the key but I can't find any info about it. There may be a firewall with ports that need opening between the machines which I am checking with our sys admins now. But I can do a regular ping between the machines. Other than that I am reading a lot of articles talking about OS services and components I know nothing about and am having trouble finding any info on. Can anyone shed any light on this? FYI the machine is running Windows Server 2003 RS SP2.

  Read the article

• Windows 7 Synchronize folders BUT while some files are open

  - by Nick

  I need some way to synchronize 2 drives I have. I want to do this ofter (once a day or so) There is the main drive that I want to clone/synchronize on a backup hard disk. The problem is in that there is an open TrueCrypt file mounted as a drive, and its live. If you don't know what true crypt is, basically you create a file on a hard disk and that file is encrypted. It's constantly open and modified live. Also Its pretty large. 100GB + I will use freefilesync . There are many tools that can do that. My question is, is it safe to copy the encrypted file while its open ? Does the software freeze the file in one state and copies it ? Or will I get a corrupted file on the other drive ? It was not clear to me how windows handles that. I read something about shadow copy, and the software says that it supports this. Does anyone know something on the matter that can help me ? or some software that will work ok in my scenario ? Thanks

  Read the article

• FTP Scripting Capabilities

  - by lmg

  I am looking for an FTP client that will allow me to do the following Include a GUI for setting up a number of FTP connections Support FTPS Run unattended on Windows Server 2008 Retry failed transactions Support email Support custom scripts I need to pull files from a few different servers and there are certain calculations that need to be done depending on which server the files come from. I've looked at SmartFTP and it looks like pretty much what I need except I can't get it to run as a Windows Scheduled Task (I currently have some support threads open in their forum). I've also looked at a few other FTP clients (Filezilla, RoboFTP, and AutoFTP (you can find the Windows 7 BSOD in this one!)) that haven't had the capabilities I'm looking for. Right now, I'm looking at WS_FTP and its scripting capabilities. It appears I can create a script to run as a scheduled task, but I can't add the script to a file transfer task. Does anyone have suggestions on how I can do post-transfer processing on the files or better yet how to integrate scripting into the file transfer task? I'm also open to other suggestions for FTP clients as well if you have them! If I can't find a suitable FTP client, custom scripting will just have to do the trick.

  Read the article

• Powershell Script to help archive company email

  - by sec_goat

  I am attempting to use powershell to gather emails that pertain to a certain subject, so that these correspondences might be turned over to a legal department. I am having a couple of issues here that I would like some assistance getting past. I run the following command: get-mailbox -Database "Mailbox Database" | Export-Mailbox -ContentKeywords "Keywords To Search" -TargetMailbox "sec_goat" -TargetFolder EmailSearch -StartDate "01/13/2011 12:01:00 This has pretty much done what I want, and returned a boat load of emails, however it has also flooded my inbox with hundreds of blank calendars and contact lists. I realize now I should have used the exclusion on these folders, as well as a test environment (which we don't have). 1.How can I clean up this script to not include all the blank folders, contacts and calendars that DO NOT match the keywords search? 2.How do I clean up hundreds of blank contact lists and calendars in my mailbox without right clicking and deleting each one? EDIT: I edited the post to change the scope of the question. I think my focus is less on the legal perspective and more on the "How can I clean up my mess and make future archives less messy and painful?"

  Read the article

• Is it possible to recover from the Windows 8 refresh feature?

  - by Warren P

  The intention of the Windows 8 RTM (released version) Refresh feature is to restore the system to the way it was when I first installed. It didn't though. Almost everything that came in the start-screen (not a menu any more) is gone, not just third party apps I installed, but EVERYTHING other than the icon for internet explorer, and the icon for the store, and the desktop, were wiped. Out of the box Windows 8 had a pretty large list of things installed, and it seems that the Refresh feature wipes all of them out. Is it possible to really get the system back to a fresh install state, or should I just re-install from the DVD I made? (I have access to Windows 8 RTM, legally through the MS Action Pack subscription.) I suspect that if I create a new account, I might get a new desktop with a default set of icons, but I'm hoping it might be possible to do this without using a different login. The second problem with Windows 8 refresh is it seems to trash the ACL's on my C: drive, taking all permissions away for access to the C: drive, making nothing on it visible or readable to my primary and only login account. I believe it might be possible to undo the damage done by the "refresh" with some judicious use of icacls from the command prompt.

  Read the article

• Variable host IP address in iptables rule

  - by DrakeES

  I am running CentOS 6.4 with OpenVZ on my laptop. In order to provide Internet access for the VEs I have to apply the following rule on the laptop: iptables -t nat -A POSTROUTING -j SNAT --to-source <LAPTOP_IP> It works fine. However, I have to work in different places - office, home, partner's office etc. The IP of my laptop is different in those places, so have to alter the rule above each time I change place. I have created a workaround which basically determines the IP and applies the rule: #!/bin/bash IP=$(ifconfig | awk -F':' '/inet addr/&&!/127.0.0.1/{split($2,_," ");print _[1]}') iptables -t nat -A POSTROUTING -j SNAT --to-source $IP The workaround above works. I only still have to execute it manually. Perhaps I could make it a hook executing whenever my laptop obtains an IP address from DHCP - how can I do that? Also, I am just wondering if there is an elegant way of getting it done in the first place - iptables? Maybe there is a syntax allowing to specify "current hardware ip addres" in the rule?

  Read the article

• 5 year old server upgrade

  - by rizzo0917

  I am looking to upgrade a server for a web app. Currently the application is running very sluggish. We've made some adjustments to mysql (that's another issue in itself) and made some adjustments so that heaviest quires get run on a copy of the database on another server was have as a backup, however this will not last that much longer and we are looking to upgrade. Currently the servers CPUs are (4) Intel(R) XEON(TM) CPU 2.00GHz, with 1 gig of ram. The database is 442.5 MiB, with about 1,743,808 records. There are two parts of the program, the one, side a, inserts and updates most of the data. Side b, reads the data and does some minor updates. Currently our biggest day for side a are 800 users (of 40,000 users all year) imputing the system. And our Side b is currently unknown, however we have a total of 1000 clients. The system is most likely going to cap out at 5000 side b clients, with about a year 300,000 side a users. The current database is 5 years old, so we can most likely expect the database to grow pretty rapidly, possibly double each year (which we can most likely archive older records if it comes to that). So with that being said, should we get a server for each side of the app, side a being the master, side b being the slave, any updates made on side b are router to side a. So the question is should i get 2 of these or 1. 2 x Intel Nehalem Xeon E5520 2.26Ghz (8 Cores) 12GB DDRIII Memory 500GB SATAII HDD 100Mbps Port Speed And Naturally I would need to have a redundant backup so it could potentially be 4 of them.

  Read the article

• Windows Server 2008 Alerting to Low memory

  - by t1nt1n

  I have a file and print server running on Windows 2008 R2 fully patched in a VSphere environment (ESXi 5.1 fully updated). Every evening between 19:20 and 19:30 our monitoring software reported that the available memory is 1% and performance is dire. There is nothing in the event logs to point to an issue. At this point in the evening I am general the only user on the system to check to see why these alerts are going off. Things I have done; Checked to see if any backups are running – None at all. Checked Scheduled tasks – None before or during this time period. Moved the VM to another host. AV is disabled to rule out that as the issue. The server does not have any problems during the day with memory when fully loaded with about 50 users. The server did have 4GB ram provisioned but I have increased this to 5Gb. Running PrefMon at the time (I will save the graphs tonight) There very little CPU usage at the time but RAM usage goes up.

  Read the article

< Previous Page | 579 580 581 582 583 584 585 586 587 588 589 590  | Next Page >