Search Results

Search found 2066 results on 83 pages for 'cable'.

Page 62/83 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69 | Next Page >

I just moved, have no internet on my laptop or ipod, but everyone else who lives here does

- by Kay

I just moved to Thunder Bay and my laptop as well as my ipod cannot connect to the internet. My laptop allows me to write the password for the wifi, but I still have no internet connection. When I try to use the cable, the computer tells me I have a perfect connection, even the icon shows that it's working, but I can't open any web pages or use any internet functions. When I try to use MSN it sends me to a troubleshooting option and informs me that there's some kind of problem with the "gateway". I have unplugged the modem and the router and plugged them back in, this did not help. I am living in a home where all the people are using wifi on the same system as me, and no one has ever had any problems. Back home both my laptop and my ipod worked without a problem both in my home, as well as on campus. Since this problem seems to be limited only to me, it would indicate that there's a problem on my end -- with my laptop. However, in that case my ipod would be working. It has never failed to connect before. Any suggestions would be much appreciated.

Read the article
Ubuntu 12.04 LTS , Dell d410 output to External Monitor/TV with docking

- by Gck

I am not able to see the video output on My external monitor/TV after installing 12.04 LTS. I had the same issue with 11 versions also. This issue does not happen on 10.04 LTS version. This is my setup. Dell latitude D410 with Intel Mobile 915 GM/910GML express controller using the Dell docking station Connecting to my 42inch TV with DVI (from Docking) to HDMI cable (on TV) If i close the lid, some times i am able to see the video output on TV, but the resolution is making the fonts so small, i cannot even see it and when i click displays option to change the resolution, the output goes off completely and it is shown now on the laptop screen. one time, i got the output on both the screens, but i am not able to replicate that scenario even after trying the Fn+F8 key option on my laptop. earlier some time back when i ran version 11.x ubuntu, i was able to get the output on both the screens (basically mirrored output) with large font resolution on my TV using the monitor Test tool as mentioned here :http://www.bigfatostrich.com/2011/05/solved-ubuntu-11-04-broken-external-display/ The problem with this approach is that i have to do it every time i restart the machine and more over the video output is present on both the screens (mirrored), which is of no use. As i stated before, this does not happen with 10.04 LTS. With 10.04 LTS my laptop screen is off automatically and the output is seen on TV/external display. Can anyone share any options that i can try? How can we achieve the behavior of 10.04 LTS with respect to the External display on 12.04 LTS . Thankyou very much for your help in advance.

Read the article
SMART Status Data Interpretation - Disk Utility

- by Mah

Last week my external harddisk (Seagate Barracuda 1.5TB in a custom enclosure) showed signs of failure (Disk Utility SMART Pre-failure status - several bad sectors) and I decided to change it. I bought a new HDD (Seagate Barracuda 2TB) and connected it to my Ubuntu box with a SATA to USB cable that could not report SMART status. I copied all the contents of the old HDD to the new HDD (one partition with rsync, the other with parted cp) and then gently replaced the old HDD with the new one inside my aluminum enclosure. For obscure reasons after reconnecting the new HDD through the old enclosure, the Linux box could not detect my partitions. I recovered the partitions with testdisk and restarted the computer. After the restart I checked the SMART status of the new HDD an I get this: Read Error Rate --------------- Normalized 108 Worst 99 Threshold 6 Value 16737944 I got a high value on the Seek Error Rate as well. Wondering why this happens I copied 2 GB directory from one partition to the other and rechecked the SMART status (5 minutes later). This time I got the following: Read Error Rate --------------- Normalized 109 Worst 99 Threshold 6 Value 24792504 As you see there has been an increase in the error rate. I am unable to interpret these numbers. Is my new hard disk already dying? What are the acceptable values in these fields for Seagate hard disks? Then why the assessment is still good? While I could get temperature and airflow temperature data from my old HDD, I can not fetch them for the new one. I noticed that my old hdd had got really hot sometimes. Is it possible that the enclosure is killing the harddisks due to high temperature?... Thanks

Read the article
What would cause SSD to become not detectable?

- by Balthazar

I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

Read the article
no way to use opendns on pppoe connection?

- by magisterludi

I have an old speedtouch usb modem (revision 0) and on my desktop with xubuntu 12.04 I've configured a pppoe connection. I can connect and my ISP assign an IP address and the DNS but the primary DNS address is not reachable by ping, the secondary yes but no address is resolved then I can't surf the web. Then I want to set the open DNS but there is bo way, if I change manually /etc/resolv.conf it is rewrited by some script (there is the flag usepeerdns on the configuration script, if I exclude it there is no way to assign any DNS server because resolv.conf is not read) also if I set not writable the file changing the default permission. I changed dhclient.conf with the code prepend domain-name-servers 208.67.222.222,208.67.220.220; and now if I connect by a wifi connection to my router I'm using openDNS server but ppp does not use this script as long as I can see and the DNS server is always setted by my ISP. How can I use set DNS manually to a PPP connection? Is there any way to change it after the connection? Why NetworkManager is not able to manage my dsl connection, it seems not able to manage the dsl usb cable modem. If I use pppoeconf NetworkManager doesn't start and I have to manually delete the lines added to /etc/network/interfaces because the system is not able to start with full configuration of network If I connect a modem-router to the same line I can surf with the DNS server assigned by my ISP, I can't figure why. Some suggestion? Thanks to all

Read the article
make my Ubuntu 12.04 laptop visible on the network

- by Andrew Boyd

I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

Read the article
Have to run sudo dhclient eth0 automatically every boot

- by Fyksen

I just installed ubuntu 12.04.1 alternative install (for raid 0 on some disks). I Have some problems with the net. I'm at school, we use cable, and it got IPv6. If I run ifconfig eth0 heres my output: eth0 Link encap:Ethernet HWaddr e0:cb:4e:87:ff:db inet addr:128.39.194.217 Bcast:128.39.194.223 Mask:255.255.255.224 inet6 addr: 2001:700:1100:8008:e2cb:4eff:fe87:ffdb/64 Scope:Global inet6 addr: fe80::e2cb:4eff:fe87:ffdb/64 Scope:Link inet6 addr: 2001:700:1100:8008:48f7:c23:1d87:da6c/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1063378 errors:0 dropped:0 overruns:0 frame:0 TX packets:489811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1577173461 (1.5 GB) TX bytes:37043669 (37.0 MB) Interrupt:68 Base address:0x6000 My /etc/network/interfaces look like this: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 # NetworkManager#iface eth0 inet dhcp # NetworkManager#hostname 2001:700:1100:1::4 # This is an autoconfigured IPv6 interface iface eth0 inet6 auto (I had to remove the hash tags, because of the BIGFONT i get on ask ubuntu) The "network manager" says that I'm not connected. Let me know if you need any more information. :)

Read the article
apt-get update very slow, stuck at "Waiting for headers"

- by Liam

I have looked at similar questions: Stuck at 0% [waiting for headers] (apt) apt-get update stuck on "Waiting for Headers" However neither one of them answer my problem. I am running 12.04 AMD64 and have recently started getting an issue that when I update my repos from my connection at home through a terminal, using sudo apt-get update, it takes forever (literally after 2 hours it was at 28%), however when I run from a different location it takes less than 5 minutes to complete. I have attempted changing which mirror I use but that does not solve the issue. I have also cut down what is in my sources list but this also makes no difference. There are no faults on my ADSL line as I have already contacted my ISP to check this. It also makes no difference if I use a WiFi or network cable connection. What could be my issue? A speed test (www.speedtest.net) comes out at about 0.9 Mbps down and 0.42 Mbps up (which is a shade under the advertised line speed), I reside in South Africa and use the UCT LEG server. But I have also tried the other mirrors available in SA....none of them make a difference.

Read the article
forcing upgrade or how to upgrade packages after update failed

- by Orosjopie

How do I continue upgrade or fix upgrade as upgrading in 13.04 to 13.10 failed. I'm currently running terminal in restore mode. I get the error unmet dependencies, but tried to install apt-get -f install, but get this error: unable to fetch some archives. using apt-get update also brings errors for example: failed to fetch http: archive.canonical.com/ubuntu/dists/quantal/release.gpg Could not resolve 'archive.canonical.com. Is it my internet connection? Its currently connected via a network cable and internet is on other computers. If internet on my ubuntu 13.10, how do I switch it on? or how can fix my upgrade problem that I can boot ubuntu normal, backup, then format and reload ubuntu 13.10 properly? I posted this problem that has also linked to this problem I mentioned: upgrading to ubuntu 13.10 failed/crashed. I did manager to install/upgrade some of the files and got ubuntu 13.10 to reboot, but not 100%, as it is slow and the unity desktop is not showing 100%. in trying some of the commands online, I get the error that the activity manager is not installed, when trying to install it, it conflicts with activity-log-manager-common. Please assist.

Read the article
/etc/resolv.conf nameserver fd00::1

- by user88631

My /etc/resolv.conf constantly get a mysterious entry, i run a home network with ipv6 provided by ravd, the interface is auto-configured by Network manager (all name server lookups are lost when this line is first in my /etc/resolv.conf) . Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) **# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN** nameserver fd00::1 nameserver 192.168.1.1 search home.int When ping is working cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.1.1 search home.int So something is putting fd00::1 at start of file, not if I ping6 fd00::1 I get Destination unreachable: Administratively prohibited To diagnose this I ran the router with single cable to connected to ubuntu machine. Ran tcpdump + restarted network on ubuntu. "tcpdump ip6 -e -i eth0 | grep fd00" finds nothing, it's not being advertised via the network.. The only hit I got was when an upstream router refused a connection attempt from the ubuntu machine to fd00::1. I have also switched on debug for network manager & it appears to set the mystery line.. 15:22:14 storage-pc NetworkManager[349]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. 15:22:14 storage-pc NetworkManager[349]: <warn> dnsmasq exited with error: Other problem (5) 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281528] [nm-dns-manager.c:598] update_dns(): updating resolv.conf 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281875] [nm-dns-manager.c:719] update_dns(): DNS: plugin dnsmasq ignored (caching disabled) 15:22:14 storage-pc NetworkManager[349]: <info> ((null)): writing resolv.conf to /sbin/resolvconf 15:22:14 storage-pc dbus[2184]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 15:22:14 storage-pc dnsmasq[2875]: reading /etc/resolv.conf 15:22:14 storage-pc dnsmasq[2875]: using nameserver 192.168.1.1#53 15:22:14 storage-pc dnsmasq[2875]: using nameserver fd00::1#53 Any suggestions on how to find out where this comes from?

Read the article
dell vostro 1000 broadcom wireless connection

- by lorrenuy

I have a problem with the hardware broadcom wifi. I press the hotkey fn+f2 to activate the hardware and this will not work. I'll look at the drivers but it appears to be installed. How can I solve this problem? Ubuntu is all new to me so if possible, give me a clear explanation. Now do I connect the lan cable. I use the Ubuntu 11.10 lawrence@lawrence-Vostro-1000:~$ sudo lshw -class network [sudo] password for lawrence: PCI (sysfs) *-network description: Network controller product: BCM4311 802.11b/g WLAN vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth1 version: 02 serial: 00:1c:23:a2:b9:a9 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=192.168.1.18 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff lawrence@lawrence-Vostro-1000:~$ lawrence@lawrence-Vostro-1000:~$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

Read the article
Why does Ubuntu keep trying to connect to a WiFi network while plugged into an ethernet

- by labarna

My desk is situated at the edge of the range of a wireless signal which I use occasionally (when away from my desk) and is therefore saved in network manager. At my desk, however, I plug into the ethernet cable. While I'm working the computer is constantly trying to join the wireless network and usually failing this results in two annoying behaviors. 1: In gnome shell the network connect and disconnect notices keep popping up at the bottom of the screen and I have to click them to make them disappear (I assume it's been fixed in the next version of gnome). 2: (the worst!) Occasionally the wifi password dialog will pop up and ask for the password to this network (which is already saved). An additionally annoyance is that in gnome shell I'll get two copies of the dialog that I have to cancel, one is gnome shell themed (no window border etc...) and the other is just normal gnome themed. (Sometimes if I've been away from the computer for a while I will have multiple copies of this dialog up as its been trying to connect for a while resulting in at times 20 dialogs to cancel). Note, all the while I've been happily connected to the ethernet and have full network access. This is incredibly annoying and distracting, why doesn't ubuntu stop trying to connect to wifi if I'm on the ethernet (unless I want to broadcast my own network, but that's different)?

Read the article
How do I get OBDII software working?

- by NoBugs

I have an ODBII USB cable for vehicle diagnostics, unfortunately I haven't been able to get it working on Ubuntu 12.04. The closest I've come is using the VAG-COM software with wine, using the ln -s /dev/ttyUSB0 ~/.wine/dosdevices/com1 trick and running stty -F /dev/ttyUSB0 speed 9600 repeatedly. It will connect and show the vehicle is OBDII, but none of the useful features seem to be working. I tried: Scantool - says it's connecting to the /dev/device in terminal, but doesn't. obdgpslogger - times out all the time. pyobd - This seems to be the most up-to-date source I could find, I had to adjust the code a bit to work (see here for changes). Still, in obd_io.py interpret_result function, it says it's looking for 4 space separated numbers, where the usb-serial is receiving bogus code "0100" instead? The device shows up in lsusb as: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Is the problem that these native tools don't expect a USB serial, or a serial of this type? Or are these apps too old to recognize OBD2 of this vehicle?

Read the article
How to make pulseaudio and ubuntu detect the same audio device as alsa driver

- by Kiwy

I use Ubuntu 14.04 x64 and I use gnome-shell on my laptop. I have a Bose companion 5 (which is basically a USB sound system) and a HDMI port, both does work perfectly when I just boot with the cable plugin. However, when my laptop go to sleep or get unplugged from those two outputs, if I plug back the device, I end up without any hardware detection (only the built-in speakers) from pulse and gnome-shell sound output selector while if I use alsamixer, the device look up and ready. gstreamer-properties allow me to select and test effectively any device but while alsa recognize any device on the run, pulse is not capable of handling things correctly, my question is then: How can I make pulse detect and use the same hardware as alsa, or how to remove completely and gracefully pulseaudio (meaning volume applet running in gnome shell) I don't mind if the project implies to recompile half gnome shell if it implies those audio outputs work all the time. Pulse does not list my soundcard when I use command pactl list cards while the module plug&play for sound card is loaded in pactl list modules. I really don't know what to do, the behavior seems pretty random.

Read the article
Managing Kindle Fire with on 12.04 via Micro-USB

- by pirtle

To begin, I have read both Is there a way to get a Kindle Fire to work with 12.04? and How can I transfer files to a Kindle Fire with a Micro-USB cable? My problem is that I am unable to mount my Kindle Fire in order to add books to it. I have installed calibre, but it is unable to manage any devices until the computer itself has recognized it. The latter post had an excellent answer (provided by @jeremiah) that was making some progress. Unfortunately, I think I don't know enough about the -t flag used with mount. This is what I've done... Ran dmesg to locate the device: [ 3.920886] sd 6:0:0:0: [sdb] Attached SCSI removable disk Confirmed it's location: $ sudo ls -l /dev/disk/by-id lrwxrwxrwx 1 root root 9 Aug 18 15:52 usb-Amazon_Kindle_3C6C002600000001-0:0 -> ../../sdb So we know that my Kindle is recognized on /dev/sdb. I then used the mount command suggested by @jeremiah: $ sudo mount -t ext3 /dev/sdb/ /mnt/kindle/ mount: no medium found on /dev/sdb The same error occurs for sudo mount /dev/sdb /mnt/kindle. Note: I have created the 'kindle' directory in 'mnt' Any suggestions?

Read the article
Can't connect to or see my wifi ssid

- by ant

Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

Read the article
How to Transfer All Your Information to a New PS3

- by Justin Garrison

The PlayStation 3 now costs half the price, has double the storage, and uses half the power. If you need another reason to upgrade, Sony also makes it easy to transfer all of your information to a new console. Transferring all of your games, data, and settings is easier than ever, and all you need is an ethernet cable. Read on as we walk you through the whole process of setting up your new PS3 and wiping all your information off the old one. Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Hack Apart a Highlighter to Create UV-Reactive Flowers [Science] Add a “Textmate Style” Lightweight Text Editor with Dropbox Syncing to Chrome and Iron Is the Forcefield Really On or Not? [Star Wars Parody Video] Google Updates Picasa Web Albums; Emphasis on Sharing and Showcasing Uwall.tv Turns YouTube into a Video Jukebox Early Morning Sunrise at the Beach Wallpaper

Read the article
print jobs are held until the VirtualBox guest OS is reboot

- by broiyan

Here is the setup: VirtualBox 4.1.20 (which the Help window describes as 4.1.12_Ubuntu) Extension Pack 4.1.20 (for USB support) Windows 7 Home Premium as a guest operating system on VirtualBox Ubuntu 12.04 with dist-upgrade's to September 2012 as the host operating system. Fuji Xerox DocuPrint P205b, which I believe is a GDI printer, connected via USB. The problem is that often print jobs will sit in the print queue and nothing comes out of the printer. The printer status for the first item in the queue will be Printing even though nothing happens. Then upon rebooting Windows, the print jobs get printed, seemingly simultaneous to the rebooting process; that is as Windows reloads. One way to avoid this problem is to reboot Windows with the printer cable attached, and then submit the print jobs. The print jobs get printed in a timely manner. Perhaps VirtualBox has a problem with USB being plug-n-play and hot pluggable. It's not convenient to have the printer plugged in when Windows boots because: One, this is a laptop, and Two, I may be boot Windows for a purpose other than printing and not anticipate needing to print. Are there any recommendable fixes for this problem?

Read the article
Multiple monitors showing same screen but different resolutions

- by Luis Alvarado

Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

Read the article
Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

- by Tim

Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

Read the article
Ubuntu 12.04 Server ping gateway responds with destination host unreachable

- by blckblttkd

I consider myself fairly avid with Ubuntu and Linux, but this one has me stumped. I built up a Xen Server using Ubuntu 12.04 as the base operating system. It has multiple domUs running on it. My home network has a statically defined network where I got all the network connectivity going peachy. The server was moved to a permanent home this morning. So, the network configuration on the main system had to change. Again, another static network, but now I can't ping the upstream gateway from the host. As the VMs use this NIC over a bridge, they too are broken. Ping responds with "destination host unreachable." I simplified the networking down to a simple static network as seen below (no bridge or anything) just to get it to work. Here's the contents of my /etc/network/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 216.7.188.228 gateway 216.7.188.225 netmask 255.255.255.240 broadcast 216.7.188.255 network 216.7.188.0 dns-nameservers 8.8.8.8 8.8.4.4 Here's the contents of route -n 0.0.0.0 216.7.188.225 0.0.0.0 UG 100 0 0 eth0 216.7.188.224 0.0.0.0 255.255.255.240 U 0 0 0 eth0 And the results of pinging the gateway: PING 216.7.188.225 (216.7.188.225) 56(84) bytes of data. From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable Again, this worked in one network flawlessly (obviously with different parameters in the interfaces file). I did try using eth1 (as there are two NICS on the server (in case the MAC address got flipped on bootup). No success there. Yes, the cable is in the right port now :) Any thoughts? I appreciate the help!

Read the article
VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

- by Aaron

I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

Read the article
Help with the RT3290 Wireless adapter

- by Potek

I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

Read the article
How can I set my resolution to 1280x1024 on an Acer Aspire Revo 3700?

- by torbengb

I've just set up a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. Almost everything works OK, but the graphics are not OK: the recommended Nvidia driver is activated but the monitor is not detected, so the resolution is wrong. How can I make Ubuntu detect my monitor? How can I get the proper resolution (1280x1024) in Ubuntu? I know that my monitor is not a CRT but an LCD: it's a BenQ, model T905, with 1280x1024 resolution at 60Hz, connected via a normal VGA cable. DVI or HDMI is not an option. When I go to SystemPrefsMonitors, I get: It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead? YES NO If I say NO then I get a window: or for YES I get this: In both cases I don't see that I can fix this problem. The main reason for getting this new computer was that I was sick of having graphics problems on the old one with a very ugly solution that didn't give me hardware support - but at least I got the resultion. Why is this so difficult... sigh!

Read the article
Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

- by Anthony

I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69 | Next Page >