Search Results

Search found 46749 results on 1870 pages for 'system preferences'.

Page 596/1870 | < Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >

• Recover data from hard disk

  - by Hitesh Solanki

  Hi I have formatted my c: drive and window xp is installed successfully,but I cannot able to access d: drive. when I am trying to double click on the d: drive,following message is displayed: "the disk in drive D: is not formatted, do you want to format it now ? " When I am trying to access from command prompt,the following message is displayed: "The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted." So please help me.... Thanks in advance....

  Read the article

• How to install windows 7 from scratch on a disk which already contains partitions

  - by rangalo

  Hi, I have following partitions on a 1 TB disk. 14 GB UNKNOWN recovery partition 100MB NTFS System Reserved partition for Windows 7 448GB NTFS Windows 7 system partition 468GB NTFS Data partition for windows 7 Now because of the problems mentioned in my other question here I got a brand new windows 7 cd and want to install it from scratch after deleting all the extra partitions. But windows 7 installation doesn't give me such options. It refuses to touch the 14GB Recovery and 100 MB (reserved by previous windows 7) partition. Any ideas ? Note: Because of it is a dynamic disks most of the freely available tools refuse to delete the partitions on the disk. regards.

  Read the article

• Slow old notebook Hardy => Karmic

  - by Mailo

  Hi, i have one very slow notebook from year about 2000. On the computer is running icewm with firefox (in this times chromium for testing). My question is if it's good step to upgrade the system to Karmic Koala? I can't install another OS on that. It doesn't have CD-ROM, it can't boot from flash, or network. The new wanted state is little bit faster system for browsing web and copying photos to local NAS. I don't mention hardware configuration, becouse it's real speed is really deep below the paper parameters.

  Read the article

• Degraded RAID5 and no md superblock on one of remaining drive

  - by ark1214

  This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

  Read the article

• IIS7 Custom ASP.NET Errors

  - by Nathan

  I'm trying to setup a custom error page for the IIS 7 404.13 (Content length too large) error. Here's the relevant sections of my web.config file: <system.webServer> <httpErrors errorMode="Custom" existingResponse="Replace"> <remove statusCode="404" subStatusCode="13" /> <error statusCode="404" subStatusCode="13" prefixLanguageFilePath="" path="/FileUpload/Test.aspx" responseMode="ExecuteURL" /> </httpErrors> <security> <requestFiltering> <requestLimits maxAllowedContentLength="10240" /> </requestFiltering> </security> </system.webServer> The response that is being sent back to the server is blank. The Test.aspx file is not blank. Any idea what's going on here?

  Read the article

• Windows 2008 R2: can't extend C drive, mystery partitions

  - by wfaulk

  I have a Windows 2008 R2 server running under VMware ESX 4.0.0. I have reallocated disk space to it in order to extend the C drive, but Disk Management has "Extend Volume" greyed out. DISKPART shows more partitions than Disk Management shows, including one after the volume I'm trying to extend, which would explain why Disk Management isn't allowing the extension. Disk Management shows: System Reserved / 100MB NTFS / Healthy (System) (C:) / 39.39 GB NTFS / Healthy (Boot, Page File, Crash Dump) 10.00 GB / Unallocated DISKPART shows: Partition 1 Dynamic Data 992 KB 31 KB Partition 2 Dynamic Data 100 MB 1024 KB Partition 3 Dynamic Data 39 GB 101 MB Partition 4 Dynamic Data 1024 KB 39 GB My question at this point is: what the heck are partitions 1 and 4, where did they come from, why doesn't Disk Management show them, and, most importantly, can I delete partition 4 in order to extend partition 3?

  Read the article

• Windows 7 file-based backup service

  - by Ben Voigt

  I'm looking for a good replacement for Lazy Mirror, since it doesn't support Windows 7 well. Pros: One of the things I really loved about Lazy Mirror is that it always maintains a "full" backup, but does so by only copying modified files. As each file was copied, the old version got archived (moved to an out-of-the-way location). So after mirroring ran, there'd be a complete copy of the file system, which could even be booted if necessary. At the same time, extra space on the backup media was used to store as many older versions of files as possible, without wasting space storing multiple copies of the same version. It seems that with Windows 7 backup, there'd be wasted space storing the same data in both the system image and file backup. It was completely file-based, but also aware of the registry (it had a feature to dump the live registry to hive files in the correct format). The backups were normal NTFS filesystems, no special tool was needed to read them. It automatically cleaned out the oldest previous versions when space ran out (unlike Windows 7 backup which apparently simply starts failing the the backup media fills.) It copied all file attributes including security. Cons: It doesn't deal well with junction points, symbolic links, and hard links. It didn't run as a service without lots of help from firesrv or srvany, and then you couldn't interact with the GUI. Running as a service was necessary to be able to mirror protected OS files. It didn't have open file handling, except for registry hives. I guess that the file-by-file archive and replacement could leave mismatched sets of files, if the mirror was interrupted. This would be the advantage of incremental backup techniques that require old full backup + all intermediate incremental backups to restore. But I don't see this as presenting much of a problem, you'd really only have a boot failure if you had a mixture of pre- and post-service pack files, and I can run a full image backup using another tool before applying a service pack. Does anyone know of a tool that does both full-system backup and storage of old versions of files like Lazy Mirror did (without storing the same data multiple times), and also can run as a service in Windows 7? Free is best of course, but a reasonably priced paid program (e.g. It would be absolutely awesome if it also triggered a backup/mirror pass when a particular external drive was plugged in and generated popup warnings if backups hadn't been run recently)

  Read the article

• In Jetty, can NCSARequestLog be configured to auto-detect the time zone?

  - by David Moles

  It looks as though in 2003 or so NCSARequestLog would pick up the system time zone using TimeZone.getDefault().getID(), but in more recent versions it seems as though it's hard-coded to GMT, unless you override it in jetty.xml or programmatically. If true, this kind of annoying, since it means if you don't want GMT logging you have to edit jetty.xml for every installation (not to mention twice a year for daylight saving time). Is there a workaround that will let Jetty pick the time zone up from the system? (X-posted to Stack Overflow.)

  Read the article

• What does the "Maximum Frequency" number mean in the Windows Resource Monitor?

  - by nhinkle

  In the Windows Resource Monitor's CPU tab, there is a status box and graph for the "Maximum Frequency", right next to the "CPU Usage" values. What does this mean? The value is sometimes over 100% on my system... what could that imply? By looking at CPU-z's real-time report of the processor's clock speed, it seems to be loosely related to what frequency the CPU is running at, which would imply that it means "percent of maximum possible frequency the CPU is running at"; this would be of relevance on systems with SpeedStep and/or TurboBoost technology (or similar). Furthermore, setting the system to "power saving mode" lowers the "maximum frequency" value to around 60%, while setting it to "high performance" mode sets it to around 110%. However, the percentage does not seem to exactly correlate to the CPU speed being shown. What value is this actually representing then?

  Read the article

• g++ in Knoppix 6 LiveCD

  - by HazyBlueDot

  To avoid the inevitable, let me put this in context. I am instructing an Intro to Unix course this semester and the students are using Knoppix 6.4.3 off the LiveCD. They are not required to install the system to their hard drive, and I would like to not require them to, however they do have use of a USB flash drive. This version of Knoppix seems to include gcc, but NOT g++. The course curriculum requires compiling C++ programs. I know I can run: sudo apt-get update sudo apt-get install build-essential to install (among other things) g++, but of course this only makes sense on a system installed to a hard drive. So my question is, can I write a script that calls gcc with appropriate options and flags to compile a C++ program that students could use in place of g++?

  Read the article

• HD movies stutter.

  - by Absolute0

  I just put together a new system build in the hopes that all of my daily tasks would run smoothly and without any hiccups. Unfortunately I am still seeing some sound and sometimes video stuttering when playing HD movies in VLC (no problems with xvid/divx files). My setup is as follows: Intel core i5 750 quad core 2.66mhz 4GB ram asus p55 motherboard radeon hd 5570 video card 650gb 7200rpm western digital sata HDD 23" Nec ea23wmi monitor Operating System: Windows 7 What might be the main bottleneck that needs upgrading to fix my delays? Seems like the hard drive might be the problem but anything faster than 7200rpm is beyond my budget for a decent hard drive. Could it be anything else?

  Read the article

• Concurrent backups in SQL Server?

  - by Mikey Cee

  We currently have our backups managed by a third party company. There are a bunch of agent jobs created that take full backups (4 times a day) and transaction log backups (4 times an hour). We now want to manage our backups in house, but don't want to disable the third party's jobs until we are sure that we have everything configured correctly internally So I am proposing to have a short period (say, a couple of days) where backups are being taken both by the old and the new system. I am wondering what the ramifications of having these two different systems both manage backups, and the potential pitfalls of having backups taken simultaneously. Is this even supported? If so, and bearing in mind that the system can cope with one backup without any noticeable performance degradation, is it fairly logical to assume that it should be able to cope with two simultaneous backups? Currently the load on the server is fairly light and it rarely struggles. Any advice is appreciated

  Read the article

• /var/lib/ureadahead/debugfs using up disk space

  - by Keyo

  Running Ubuntu 10.04 and nearly all my drive space is gone. # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 7.3G 6.6G 327M 96% / none 245M 240K 244M 1% /dev none 249M 0 249M 0% /dev/shm none 249M 340K 249M 1% /var/run none 249M 0 249M 0% /var/lock none 249M 0 249M 0% /lib/init/rw /dev/sda1 228M 34M 183M 16% /boot Of course it's not mounted. I read that chmod 0 /sbin/debugfs could fix the problem, but now it just won't mount despite changing the permission to 777. This is a VM running on VirtualBox. I have done a file system check which ran fine. What is this directory and how can I remove it from the system?

  Read the article

• PostgreSQL: performance descrease due to index bloatper

  - by Henry-Nicolas Tourneur

  I'm running a PgSQL 8.1 on a CentOS 4.4 system (not upgradable unfortunately). There's a Java app running on top of the PgSQL daemon and we got to reindex the database every 2 months or so. Also important: the database isn't growing. It looks like the bloat is now coming faster than before and this tends to increase. My config is available here, autovacuum daemon is enabled and running quite often: pastebin.com/RytNj7dK You can also find the output of this query wiki.postgresql.org/wiki/Show_database_bloat 3 hours after running reindex: http://pastebin.com/raw.php?i=75fybKyd 72 hours after running reindex: http://pastebin.com/raw.php?i=89VKd7PC Does anyone have any idea what should I tweak to get rid of that growing bloat? Thanks for your help PS: due to antispam prevention system, I had to remove the first 2 http:// prefixes for my two first links.

  Read the article

• How to make Shared Keys .ssh/authorized_keys and sudo work together?

  - by farinspace

  I've setup the .ssh/authorized_keys and am able to login with the new "user" using the pub/private key ... I have also added "user" to the sudoers list ... the problem I have now is when I try to execute a sudo command, something simple like: $ sudo cd /root it will prompt me for my password, which I enter, but it doesn't work (I am using the private key password I set) Also, ive disabled the users password using $ passwd -l user What am I missing? Somewhere my initial remarks are being misunderstood ... I am trying to harden my system ... the ultimate goal is to use pub/private keys to do logins versus simple password authentication. I've figured out how to set all that up via the authorized_keys file. Additionally I will ultimately prevent server logins through the root account. But before I do that I need sudo to work for a second user (the user which I will be login into the system with all the time). For this second user I want to prevent regular password logins and force only pub/private key logins, if I don't lock the user via" passwd -l user ... then if i dont use a key, i can still get into the server with a regular password. But more importantly I need to get sudo to work with a pub/private key setup with a user whos had his/her password disabled. Edit: Ok I think I've got it (the solution): 1) I've adjusted /etc/ssh/sshd_config and set PasswordAuthentication no This will prevent ssh password logins (be sure to have a working public/private key setup prior to doing this 2) I've adjusted the sudoers list visudo and added root ALL=(ALL) ALL dimas ALL=(ALL) NOPASSWD: ALL 3) root is the only user account that will have a password, I am testing with two user accounts "dimas" and "sherry" which do not have a password set (passwords are blank, passwd -d user) The above essentially prevents everyone from logging into the system with passwords (a public/private key must be setup). Additionally users in the sudoers list have admin abilities. They can also su to different accounts. So basically "dimas" can sudo su sherry, however "dimas can NOT do su sherry. Similarly any user NOT in the sudoers list can NOT do su user or sudo su user. NOTE The above works but is considered poor security. Any script that is able to access code as the "dimas" or "sherry" users will be able to execute sudo to gain root access. A bug in ssh that allows remote users to log in despite the settings, a remote code execution in something like firefox, or any other flaw that allows unwanted code to run as the user will now be able to run as root. Sudo should always require a password or you may as well log in as root instead of some other user.

  Read the article

• The bcdedit export operation fails. windows vista not booting.

  - by ocurro

  I'm fixing my boot record with bootrec.exe, the first command goes: C:\>bcdedit /export c:\BCD_Backup Immediately I receive this error here: The store export operation has failed. The requested system device cannot be found. Likewise, the next command fails, because bcd file is missing: C:\>attrib bcd -s -h -r Lastly, when trying the next command, all it returns is "The requested system device cannot be found". C:\>bootrec /RebuildBcd I'm using Windows 7 setup image to operate. Have Vista installed atm. Has it happened to you? I'd appreciate some orientation.

  Read the article

• Open-source training class/room/instructor resource management software?

  - by Kyle Eli

  We're looking to replace an internal system used for managing training classes with something a bit more robust. Needs to be open-source or have a license level that grants access to source, and needs to be ASP.net (C# preferred, but could live with VB.net) Ultimately, we'll need to be able to assign facilities and instructors, manage attendees, send notifications, and build calendar views. We'll also be integrating with our website to allow on-line sign-up and other things for attendees to manage on their own. We do expect to implement quite a bit of it in-house, but we'd like as broad of a base to start from as we can get. Still, just a really good web-based meeting-room reservation system might make a good enough starting point. In list form: Meeting/training resource management softwareASP.net (C# or VB.net)Source availableWe're expecting to have to modify the software to meet all of our requirements

  Read the article

• Tips for teaching Linux to beginners?

  - by chiborg

  I will teach Linux to people of the ages 20-75 with no prior Linux knowledge. I want to teach some basic concepts (what's an OS, what's a file system) and some practical knowlede: How to install it, network configuration, set up email client, installing software with a packet manager, etc. I have held a system administrators course in the past, but was under the impression that my method of teaching was not adequate. I've explained what I was about to show, showed students on the projector, told them to repeat it on their computers and summarized what they should have learned. They could ask questions all the time. But I fear they remembered only one-third of the knowledge I taught them. I have two questions here: Are there better methods to teach this particular subject in a classroom equipped with computers? Are there some tricks that "slow me down" when I teach stuff that I know inside-out?

  Read the article

• Why does Windows spooler require an administrator account?

  - by Software Monkey

  Does anyone know what changes I might need to make to allow restricted users to print using a printer configured for spooling? My Windows XP SP3 system currently requires me to use an Admin account for printing if the printer is configured to spool documents before printing. If the printer is configured for direct printing it works for all accounts. This used to work and some months back it just stopped, and I can't pin down why. The printer, which is an HP PSC 1200 (an old printer) itself is configured for Everyone to have Print authority and my specific (restricted) account to have Full authority, that is Print, Manage Printers and Manager Documents. My HDD is locked down for restricted users given them only read authority to the entire file system except their data directories, which is how I have run my systems for years. I assume there may be a directory somewhere that I need to allow users to write to.

  Read the article

• How do i find out what's preventing delete requests from working in iis7.5 and iis8?

  - by Simon

  Our site has an MVC Rest API. Recently, both the live servers and my development machine stopped accepting DELETE requests, instead returning a 501 Not Implemented response. On my development machine, which is Windows 7 running IIS7.5, the solution was to add these lines to our Web.config, under system.webServer / handlers: <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> ... <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE" type="System.Web.Handlers.TransferRequestHandler" resourceType="Unspecified" requireAccess="Script" preCondition="integratedMode,runtimeVersionv4.0" /> However, this didn't work on any of our live servers; not on Sever 2008 + IIS7.5 and not on Server 2012 + IIS8. There are no verbs set up in Request Filtering, and WebDAV is not installed on any of our live servers. The error page gives no further information, and nothing gets recorded in the logs. How do I find out what's preventing DELETE requests from working in iis7.5 and iis8?

  Read the article

• iMac goes black, makes clicking sound... thoughts?

  - by Josh

  This is the second time this has happened. The display on my Apple iMac (20-inch Late 2006) just went black, system was completely unresponsive to mouse/keyboard input, I could not SSH into nor ping the machine, and it didn't show up in ARD. I could hear a fairly loud clicking noise from inside which sounded like the DVD drive trying to seek -- but there is no disc in the drive. It could possibly be the hard drive... I pressed the power button and the system powered off, and now will not power on again. Thoughts / suggestions as to next course of action?

  Read the article

• Making Sure Which Partition to Choose with Linux Dual Boot?

  - by user128360

  In the Linux Mint 12 LXDE the partitions are listed as nsd 1, 2, 3, 4, though I have a Windows 8 CP installation on one of the two partitions on the single hard drive. The space usage is differing in both system calculations, though still relateable. Where the partition is at around 20 GB usage in Windows 8 it will be at around 24 GB in the Linux installation menu. I am just wondering is there a certain way to choose the right partition? Also in the drop down menu regarding the boot loader, there are multiple options, which one would be the one to be chosen in this case? What about the system-reserve partition of Windows 7 (the one I am trying to overwrite)? What is happening with that?

  Read the article

• Windows Server 2003 R2 sp2 and Exchange 2003 - missing pop-up menu "Exchange Tasks"

  - by Denis

  I need to recover database. That's what i doing step-by-step: - In Exchange System Manager check the server - Create new Recovery Storage Group - Add Database to recover - Mount store for it Database (Mailbox Store) - all finish successful Next step - I need check user and in pop-up menu click on "Exchange Tasks...", but in menu i see only "Help". Main question - why I have not "Exchange Tasks" and how I can get it? But I can see "Exchange Tasks" in "First storage Group"-Mailbox-User. Sorry for my bad English. Thanks, Denis

  Read the article

• Win 8: Adding a boot volume to an MBR dynamic disk [NOT about changing to basic disks]

  - by Stilez

  (This is NOT aiming to convert to basic disk. In this question, the disk stays dynamic but becomes bootable) There doesn't seem to be a clear, well stated answer I can find, for the question "What are the criteria for Windows 8 to successfully boot from an MBR dynamic disk", or "how do I fix a dynamic MBR partition that's failing boot"? I've tried to educate myself but can't find crucial information to clear it all up. My existing HDD/SSD setup: DISK 0 ~ 60GB SSD/MBR/basic: (350MB recovery)(60GB windows 8 bootable) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISK 2 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISKS 3, 4, 5: (ignored for simplicity: 2xHDD RAID1 + caching SSD) I'm heavy duty on data crunching and virtualisation, just maxxed out 32GB RAM @ 2133 and moved to 4960X + 64GB. Disk 0 is a pure system disk of little value, and virtualisations runs off mirrored SSDs (Samsung 840 Pro 512 x 2) for double speed reading and so they snapshot in reasonable time. I'm using 4 SATA3 ports and the board only has two decent Intel ports (onboard Marvell are poorer quality). I'm wary of choosing between LSI, HighPoint and other 3rd party controllers as I'm unfamiliar with the maze of decent RAID cards (that's a whole other issue!). I want to cut down my SSD needs by moving the boot volume and caching volume to the 840 pros, giving a setup with 2 fewer SSDs: DISK 0 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB boot)(410GB mirrored data) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(30GB cache for the ICH10R mirror)(30GB temp)(410GB mirrored data) DISKS 2, 3: (2xHDD RAID1) Intel's RST allows this, Win 8 allows booting off a MBR/dynamic disk, and the two 60GB SSDs are hardly the fastest SSDs anyway, they'll get repurposed. Moving the caching volume is easy. Moving the boot volume has me stumped. The difficulty is, I'm hitting a wall of knowledge here. I have a UEFI Asus motherboard with an previous traditional MBR/basic boot disk, and I want it to boot from a disk and volume that's MBR/dynamic. The disk copy is physically ok (Partition Wizard Server will copy to dynamic volumes) but then hits a light blue 0xc000000e boot error. No real surprise, I expected to have some boot fixing, but had expected Windows to boot-fix it (all drivers exist), or the usual manual fixes to work. Specifically, I don't know enough, to know what's got to be manually checked and perhaps corrected for the disk to boot (legacy/uefi/bios, odd partitions, boot tables, disk IDs, hidden boot files, oh my!), or if I need to change any of this secure boot/UEFI/legacy stuff in the bios, convert a 512 SSD to basic and then back to dynamic when working, or if the issue is pure OS config using "diskpart", "bootsect" and "bootrec" from the Win8 DVD. The old system disk still boots but I don't know enough to figure what to fix, to make the system boot as I want. The answers probably aren't hard but the real issue is my confusion and missing information. Thanks for helping!

  Read the article

• Understanding the Linux Root

  - by Zac

  I've been using Linux (Ubuntu) for about 2 weeks now and am still struggling with some basic concept surrounding the root user: (1) Some terminal operations (such as making subdirectories inside a FHS directory such as /opt) require me to prefix the command with sudo - why? I guess what I'm choking on is: if I'm already logged in as a valid system user, why do I have to be a superuser/root in order to modify things that the sysadmin has already deemed me worthy of accessing? (2) Is there a GUI (Gnome, KDE) equivalent to sudo? Is there a way to assume a superuser role through a graphical context, rather than from inside a new shell? (3) I can't access the /root directory logged in as myself... but I installed the system to begin with and was never asked to create a root account! How do I log in as root and gain access to /root?!? Thanks for all feedback & input!

  Read the article

< Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >