character break - Page 6

A circular character buffer

A circular, thread-safe read/write character buffer

How do I break out of a loop in Scala?

For Problem 4 of Project Euler How do I break out a loop? var largest=0 for(i<-999 to 1 by -1) { for (j<-i to 1 by -1) { val product=i*j if (largest>product) // I want to break out here else if(product.toString=product.toString.reverse) largest=largest max product } } And does anyone know how to turn nested for loops into tail recursion?

Read the article

Do unit tests sometimes break encapsulation?

- by user1288851

I very often hear the following: "If you want to test private methods, you'd better put that in another class and expose it." While sometimes that's the case and we have a hiding concept inside our class, other times you end up with classes that have the same attributes (or, worst, every attribute of one class become a argument on a method in the other class) and exposes functionality that is, in fact, implementation detail. Specially on TDD, when you refactor a class with public methods out of a previous tested class, that class is now part of your interface, but has no tests to it (since you refactored it, and is a implementation detail). Now, I may be not finding an obvious better answer, but if my answer is the "correct", that means that sometimes writting unit tests can break encapsulation, and divide the same responsibility into different classes. A simple example would be testing a setter method when a getter is not actually needed for anything in the real code. Please when aswering don't provide simple answers to specific cases I may have written. Rather, try to explain more of the generic case and theoretical approach. And this is neither language specific. Thanks in advance. EDIT: The answer given by Matthew Flynn was really insightful, but didn't quite answer the question. Altough he made the fair point that you either don't test private methods or extract them because they really are other concern and responsibility (or at least that was what I could understand from his answer), I think there are situations where unit testing private methods is useful. My primary example is when you have a class that has one responsibility but the output (or input) that it gives (takes) is just to complex. For example, a hashing function. There's no good way to break a hashing function apart and mantain cohesion and encapsulation. However, testing a hashing function can be really tough, since you would need to calculate by hand (you can't use code calculation to test code calculation!) the hashing, and test multiple cases where the hash changes. In that way (and this may be a question worth of its own topic) I think private method testing is the best way to handle it. Now, I'm not sure if I should ask another question, or ask it here, but are there any better way to test such complex output (input)? OBS: Please, if you think I should ask another question on that topic, leave a comment. :)

Read the article

Break TrueCrypt Dard Drive Encryption Quickly

<b>Help Net Security:</b> "The latest version of Passware Kit Forensic has become the first commercially available software to break TrueCrypt hard drive encryption without applying a time-consuming brute-force attack. It was also the first product to decrypt BitLocker drives."

Read the article

How insert page break in rtf files using asp.net with c#.net version 1.1?

- by Avinash

hi, How insert page break in rtf files using asp.net with c#.net version 1.1?

Read the article

how to know which special character is there in a file?

- by Pangea

My app needs to process text files during a batch process. Occassionally I receive a file with some special character at the end of the file. I am not sure what that special character is. Is there anyway I can find what that character is so that I can tell the other team which is producing that file. I have used mozilla's library to guess the file encoding and it says UTF-8.

Read the article

Python 2.7 list of lists manipulation functionality

- by user3688163

I am trying to perform several operations on the myList list of lists below and am having some trouble figuring it out. I am very new to Python. myList = [ ['Issue Id','1.Completeness for OTC','Break',3275,33,33725102303,296384802,20140107], ['Issue Id','2.Validity check1 for OTC','Break',3308,0,34021487105,0,20140107], ['Issue Id','3.Validity check2 for OTC','Break',3308,0,34021487105,0,20140107], ['Issue Id','4.Completeness for RST','Break',73376,1,8.24931E+11,44690130,20140107], ['Issue Id','5.Validity check1 for RST','Break',73377,0,8.24976E+11,0,20140107], ['Liquidity','1. OTC - Null','Break',7821 0,2.28291E+11,0,20140110], ['Liquidity','2. OTC - Unmapped','Break',7778,43,2.27712E+11,579021732.8,20140110], ['Liquidity','3. RST - Null','Break',335120,0,1.01425E+12,0,20140110], ['Liquidity','4. RST - Unmapped','Break',334608,512,1.01351E+12,735465433.1,20140110], ['Liquidity','5. RST - Valid','Break',335120,0,1.01425E+12,0,20140110], ['Issue Id','1.Completeness for OTC','Break',3292,33,32397924450,306203929,20140110], ['Issue Id','2.Validity check1 for OTC','Break',3325,0,32704128379,0,20140110], ['Issue Id','3.Validity check2 for OTC','Break',3325,0,32704128379,0,20140110], ['Issue Id','4.Completeness for RST','Break',73594,3,8.5352E+11,69614602,20140110], ['Issue Id','5.Validity check1 for RST','Break',73597,0,8.5359E+11,0,20140110], ['Unlinked Silver ID','DQ','Break',3201318,176,20000000,54974.33386,20140101], ['Missing GCI','DQ','Break',3201336,158,68000000,49351.9588,20140101], ['Missing Book','DQ Break',3192720,8774,3001000000,2740595.484,20140101], ['Matured Trades','DQ','Break',3201006,488,1371000000,152428.8348,20140101], ['Illiquid Trades','1.Completeness Check for range','Break',43122,47,88597695671,54399061.43,20140107], ['Illiquid Trades','2.Completeness Check for non','Break',39033,0,79133622401,0,20140107] ] I am trying to get the result below but do not know how to do so: newList = [ ['Issue Id','1.Completeness for OTC:2.Validity check1 for OTC:3.Validity check2 for OTC','Break',3275,33,33725102303,296384802,20140107], ['Issue Id','4.Completeness for RST:5.Validity check1 for RST','Break',73376,1,8.24931E+11,44690130,20140107], ['Liquidity','1. OTC - Null','Break:2. OTC - Unmapped','Break',7821 0,2.28291E+11,0,20140110], ['Liquidity','3. RST - Null:4. RST - Unmapped:5. RST - Valid','Break',335120,0,1.01425E+12,0,20140110], ['Issue Id','1.Completeness for OTC:2.Validity check1 for OTC:3.Validity check2 for OTC','Break',3292,33,32397924450,306203929,20140110], ['Issue Id','4.Completeness for RST:5. RST - Valid','Break',73594,3,8.5352E+11,69614602,20140110], ['Unlinked Silver ID','DQ','Break',3201318,176,20000000,54974.33386,20140101], ['Missing GCI','DQ','Break',3201336,158,68000000,49351.9588,20140101], ['Missing Book','DQ Break',3192720,8774,3001000000,2740595.484,20140101], ['Matured Trades','DQ','Break',3201006,488,1371000000,152428.8348,20140101], ['Illiquid Trades','1.Completeness Check for range','Break',43122,47,88597695671,54399061.43,20140107], ['Illiquid Trades','2.Completeness Check for non','Break',39033,0,79133622401,0,20140107] ] Rules to create newList. Create a new list in the newList list of lists if the values in the lists meet the following conditions: multiple lists that match on `myList[i][0]` and `myList[i][7]` but with have (1) sums of `myList[i][3]` and `myList[i][4]` and (2) sums of `myList[i][5]` and `myList[i][6]` that are different from each other are just listed as is in newList if multiple lists match on both `myList[i][0]` (this is the type) and `myList[i][7]` (this is the date) are the same then create a new list for each set of lists with mathcing `myList[i][0]` and `myList[i][7]` that have (1) sums of `myList[i][3]` and `myList[i][4]` and (2) sums of `myList[i][5]` and `myList[i][6]` that are different from the other lists with mathcing `myList[i][0]` and `myList[i][7]`. I also am trying to concatenate `myList[i][1]` separated by a ':' for all those lists with matching `myList[i][0]` and `myList[i][7]` and with sums of `myList[i][3]` + `myList[i][4]` and `myList[i][5]` + `myList[i][6]` that match. So essentially for this case only those lists in `myList` with sums of `myList[i][3]` + `myList[i][4]` and `myList[i][5]` + `myList[i][6]` are different from the other lists are then listed in newList. The above newList illustrates these results I am trying to achieve. If anyone has any ideas how to do this they would be greatly appreciated. Thank you!

Read the article

How could I catch an "Unicode non-character"-warning?

- by sid_com

How could I catch the "Unicode non-character 0xffff is illegal for interchange"-warning? #!/usr/bin/env perl use warnings; use 5.012; use Try::Tiny; use warnings FATAL => qw(all); my $character; try { $character = "\x{ffff}"; } catch { die "---------- caught error ----------\n"; }; say "something"; Output: # Unicode non-character 0xffff is illegal for interchange at ./perl1.pl line 11.

Read the article

What is the best way to implement handwritten character recognition on iPhone?

- by hm0429

Hi, What is the best way to implement handwritten character recognition in iPhone? I'm thinking as follows: First, taking a picture of handwritten character. Second, recognizing image of handwritten character, and then outputs a text.

Read the article

Any way to not break on certain errors in Visual Studio 2010?

- by Vulgrin

I'm working on a VS2010 project where I'm using DataAnnotations on my objects to handle validation. However, this is sort of a pain in the butt while trying to do interactive debugging because it keeps pausing VS.Net on validation errors. Obviously, I want to break on some errors, but not these particular types. Am I out of luck and I just need to turn on and off my Break on All Errors setting? Or is there some way to tell VS to just ignore these when they happen? (these are errors generated via Validator.ValidateProperty calls.) Thanks

Read the article

Repeat row headers after Page Break

- by klaus.fabian

The lead developer of the FO engine send me by chance an email about a REALLY nice feature I did not know about. Did you ever encounter a long table with merged cells, where the merged cell went on to the next page? While column headers are by default repeated on the next page, row headers are not. Tables with group-left column and pivot tables are prime examples where this problem occurs. I have seen reports where merged cells could go over multiple pages and you would need to back to find the row header on previous pages. The BI Publisher RTF templates have a special tag you can added to a merged cell to repeat the contents after each page break. You just need to add the following (wordy) tag to the next merged table cell: true Example: 2nd page of report before adding the tag 2nd page of report after adding the tag. Thought you might want to know. Klaus

Read the article

Will small random dynamic snippets break caching

- by Saif Bechan

I am busy writing a WordPress plugin. Now most users have cache plugins installed, they cache the pages. I know also some webservers as nginx have php caching and whatnot. There are also things like memcached. Now I have to admit I do not know exactly how they work, if anyone have some good links on how they work I would be glad. Some links where it's explained simple, not to technical. Now the question. My plugin displays different statistics on posts, they are always different, will this break the caching of the page. To take is a step further, sometimes the statistics of the post needs updating, and there is a small javascript snippet added to the page. Now will these two action result in the page not caching, or am I ok.

Read the article

Understanding the problem when things break in production

- by bitcycle

Scenario: You push to production The push broke multiple things That same build did not break qa or dev As a developer, you don't have prod access. There is lots of pressure from above to get things working agian. Specifics: PHP/MVC application that is API-driven in Zend. Deployed to a few servers. My question: While investigating, lets say I have a hunch that something is wrong. But, I don't know for sure. And, of course, I can't test things in production. If I have a suggested fix based on that hunch, would it be wise to try and apply it and see if it works, before understanding what the problem is?

Read the article

SPUtility.SendMail and the 2048 Character Limit

- by Damon

We were in the middle of testing a web part responsible for gathering information from visitors to our Client's website and emailing it to someone responsible for responding to the request. During testing, however, it was brought to our attention that the message was cutting off at 2048 characters. Now, 2048 is one of those numbers that is usually indicative of some computational limit, but I was hopeful that Microsoft had thought through the possibility of emailing more than 2048 characters from SharePoint. Luckily I was right. and wrong. As it turns out, SPUtility.SendMail is not limited to any specific character limit as far as I can tell. However, each LINE of text that you send via SendMail cannot exceed 2048 characters. Since we were sending an HTML email it was constructed entirely without line breaks, far exceeding the 2048 character limit and ultimately helping to educate me about this obscure technical limitation whose only benefit thus far is offering me something to rant about on my blog. The fix is simple, just put in a carriage return and a line break often enough to avoid going past the 2048 character limit. I'm sure someone can present a great technical reason for the 2048 character limit, but it seems fairly arbitrary since the "\r\n" that got appended to the string are ultimately just characters too.

Read the article

Was API hooking done as needed for Stuxnet to work? I don't think so

- by The Kaykay

Caveat: I am a political science student and I have tried my level best to understand the technicalities; if I still sound naive please overlook that. In the Symantec report on Stuxnet, the authors say that once the worm infects the 32-bit Windows computer which has a WINCC setup on it, Stuxnet does many things and that it specifically hooks the function CreateFileA(). This function is the route which the worm uses to actually infect the .s7p project files that are used to program the PLCs. ie when the PLC programmer opens a file with .s7p the control transfers to the hooked function CreateFileA_hook() instead of CreateFileA(). Once Stuxnet gains the control it covertly inserts code blocks into the PLC without the programmers knowledge and hides it from his view. However, it should be noted that there is also one more function called CreateFileW() which does the same task as CreateFileA() but both work on different character sets. CreateFileA works with ASCII character set and CreateFileW works with wide characters or Unicode character set. Farsi (the language of the Iranians) is a language that needs unicode character set and not ASCII Characters. I'm assuming that the developers of any famous commercial software (for ex. WinCC) that will be sold in many countries will take 'Localization' and/or 'Internationalization' into consideration while it is being developed in order to make the product fail-safe ie. the software developers would use UNICODE while compiling their code and not just 'ASCII'. Thus, I think that CreateFileW() would have been invoked on a WINCC system in Iran instead of CreateFileA(). Do you agree? My question is: If Stuxnet has hooked only the function CreateFileA() then based on the above assumption there is a significant chance that it did not work at all? I think my doubt will get clarified if: my assumption is proved wrong, or the Symantec report is proved incorrect. Please help me clarify this doubt. Note: I had posted this question on the general stackexchange website and did not get appropriate responses that I was looking for so I'm posting it here.

Read the article

Character Jump Control

- by Abdullah Sorathia

I would like to know how can I control the jump movement of a character in Unity3D. Basically I am trying to program the jump in such a way that while a jump is in progress the character is allowed to move either left or right in mid-air when the corresponding keys are pressed. With my script the character will correctly move to the left when, for example, the left key is pressed, but when the right key is pressed afterwards, the character moves to the right before the movement to the left is completed. Following is the script: void Update () { if(touchingPlatform && Input.GetButtonDown("Jump")){ rigidbody.AddForce(jumpVelocity, ForceMode.VelocityChange); touchingPlatform = false; isJump=true; } //left & right movement Vector3 moveDir = Vector3.zero; if(Input.GetKey ("right")||Input.GetKey ("left")){ moveDir.x = Input.GetAxis("Horizontal"); // get result of AD keys in X if(ShipCurrentSpeed==0) { transform.position += moveDir * 3f * Time.deltaTime; }else if(ShipCurrentSpeed<=15) { transform.position += moveDir * ShipCurrentSpeed * 2f * Time.deltaTime; }else { transform.position += moveDir * 30f * Time.deltaTime; } }

Read the article

Index Check and Correct Character Display in a Console Hangman Game for Java

- by Jen

I have this problem wherein, I can not display the correct characters given by the character. Here's what I meant: String words, in; String replaced_words; Scanner s = new Scanner (System.in); System.out.println("Enter a line of words basing on an event, verse, place or a name of a person."); words = s.nextLine(); System.out.println("The words you just placed are now accepted."); //using char array method, we tried to place the words into a characters array. char [] c = words.toCharArray(); // we need to replace the replaced_words = words.replace(' ', '_').replaceAll("[^\\-]", "-"); for (int i = 0; i < replaced_words.length(); i++) { System.out.print(replaced_words.charAt(i) + " "); } System.out.println("Now, please input a character, guessing the words you just placed."); in = s.nextLine(); in that code, want that the user, when types a word (or should it be character?), any of the correct character the user inputs will be displayed, and changes the hyphen to it...(more like the hangman series of games). How can I achieve this?

Read the article

Control-Break Style ADF Table - Comparing Values with Previous Row

- by Steven Davelaar

Sometimes you need to display data in an ADF Faces table in a control-break layout style, where rows should be "indented" when the break column has the same value as in the previous row. In the screen shot below, you see how the table breaks on both the RegionId column as well as the CountryId column. To implement this I didn't use fancy SQL statements. The table is based on a straightforward Locations ViewObject that is based on the Locations entity object and the Countries reference entity object, and the join query was automatically created by adding the reference EO. To get the indentation in the ADF Faces table, we simple use two rendered properties on the RegionId and CountryId outputText items: <af:column sortProperty="RegionId" sortable="false" headerText="#{bindings.LocationsView1.hints.RegionId.label}" id="c5"> <af:outputText value="#{row.RegionId}" id="ot2" rendered="#{!CompareWithPreviousRowBean['RegionId']}"> <af:convertNumber groupingUsed="false" pattern="#{bindings.LocationsView1.hints.RegionId.format}"/> </af:outputText> </af:column> <af:column sortProperty="CountryId" sortable="false" headerText="#{bindings.LocationsView1.hints.CountryId.label}" id="c1"> <af:outputText value="#{row.CountryId}" id="ot5" rendered="#{!CompareWithPreviousRowBean['CountryId']}"/> </af:column> The CompareWithPreviousRowBean managed bean is defined in request scope and is a generic bean that can be used for all the tables in your application that needs this layout style. As you can see the bean is a Map-style bean where we pass in the name of the attribute that should be compared with the previous row. The get method in the bean that is called returns boolean false when the attribute has the same value in the same row. Here is the code of the get method: public Object get(Object key) { String attrName = (String) key; boolean isSame = false; // get the currently processed row, using row expression #{row} JUCtrlHierNodeBinding row = (JUCtrlHierNodeBinding) resolveExpression(getRowExpression()); JUCtrlHierBinding tableBinding = row.getHierBinding(); int rowRangeIndex = row.getViewObject().getRangeIndexOf(row.getRow()); Object currentAttrValue = row.getRow().getAttribute(attrName); if (rowRangeIndex > 0) { Object previousAttrValue = tableBinding.getAttributeFromRow(rowRangeIndex - 1, attrName); isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue); } else if (tableBinding.getRangeStart() > 0) { // previous row is in previous range, we create separate rowset iterator, // so we can change the range start without messing up the table rendering which uses // the default rowset iterator int absoluteIndexPreviousRow = tableBinding.getRangeStart() - 1; RowSetIterator rsi = null; try { rsi = tableBinding.getViewObject().getRowSet().createRowSetIterator(null); rsi.setRangeStart(absoluteIndexPreviousRow); Row previousRow = rsi.getRowAtRangeIndex(0); Object previousAttrValue = previousRow.getAttribute(attrName); isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue); } finally { rsi.closeRowSetIterator(); } } return isSame; } The row expression defaults to #{row} but this can be changed through the rowExpression managed property of the bean. You can download the sample application here.

Read the article

SpriteFont Exception, no such character?

- by Michal Bozydar Pawlowski

I have such spriteFont: <?xml version="1.0" encoding="utf-8"?>  <XnaContent xmlns:Graphics="Microsoft.Xna.Framework.Content.Pipeline.Graphics"> <Asset Type="Graphics:FontDescription">  <FontName>Segoe UI</FontName>  <Size>20</Size>  <Spacing>0</Spacing>  <UseKerning>true</UseKerning>  <Style>Regular</Style>    <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>Ұ</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> It has the character regions (32-1200) And I get this exception: A first chance exception of type 'System.ArgumentException' occurred in Microsoft.Xna.Framework.Graphics.ni.dll The character '?' (0x0441) is not available in this SpriteFont. If applicable, adjust the font's start and end CharacterRegions to include this character. Parameter name: character Why? I'm drawing the string like this: spriteBatch.DrawString(font24, zasadyText, zasadyTextPos, kolorCzcionki1, -0.05f, Vector2.Zero, 1.0f, SpriteEffects.None, 0.5f) I even changed the spriteFont to cyrillic: <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>ſ</End> </CharacterRegion> <CharacterRegion> <Start>А</Start> <End>ї</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> and it still doesn't work. I got the (0x441 = char) exception -- EDIT -- Ok, I got the solution. It was a letter mistake in language. I had this: if (jezyk == "ru_RU") { font14 = Content.Load<SpriteFont>("ru_font14"); font24 = Content.Load<SpriteFont>("ru_font24"); font12 = Content.Load<SpriteFont>("ru_czcionkaFloty"); font10 = Content.Load<SpriteFont>("ru_font10"); font28 = Content.Load<SpriteFont>("ru_font28"); font20 = Content.Load<SpriteFont>("ru_font20"); } else { font14 = Content.Load<SpriteFont>("font14"); font24 = Content.Load<SpriteFont>("font24"); font12 = Content.Load<SpriteFont>("czcionkaFloty"); font10 = Content.Load<SpriteFont>("font10"); font28 = Content.Load<SpriteFont>("font28"); font20 = Content.Load<SpriteFont>("font20"); } and there should be not "ru_RU" but "ru-RU" I have no idea. I changed the spriteFont to cyrillic: <CharacterRegions> <CharacterRegion> <Start>	</Start> <End>	</End> </CharacterRegion> <CharacterRegion> <Start> </Start> <End>ſ</End> </CharacterRegion> <CharacterRegion> <Start>А</Start> <End>ї</End> </CharacterRegion> </CharacterRegions> </Asset> </XnaContent> and it still doesn't work. I got the (0x441 = char) exception

Read the article

What is use of universal character names in identifiers in C++

- by Jan Hudec

The C++ standard (I noticed it in the new one, but it did already exist in C++03) specifies universal character names, written as \uNNNN and \UNNNNNNNN and representing the characters with unicode codepoints NNNN/NNNNNNNN. This is useful with string literals, especially since explicitly UTF-8, UTF-16 and UCS-4 string literals are also defined. However, the universal character literals are also allowed in identifiers. What is the motivation behind that? The syntax is obviously totally unreadable, the identifiers may be mangled for the linker and it's not like there was any standard function to retrieve symbols by name anyway. So why would anybody actually use an identifier with universal character literals in it? Edit: Since it actually existed in C++03 already, additional question would be whether you actually saw a code that used it?

Read the article

Child object free movement on Parent object

- by The415

Just to be straightforward, I am completely new to many aspects of coding and am searching for different specs and guidelines to aid me on my journey to crafting a wonderful game in Epic Games' Unreal Engine 4. Okay, I know upon viewing this, some may have little to no clue what I mean, so I'll put it like this to explain what I mean : Imagine a third person game with a simple model of a character. Now, say I have an object as a torso of a character in a game. Now Say I have an object as a head of the character. How could I keep the head as a child of the torso, but at the same time, allow it to move with the camera angle.

Read the article

What is use of universal character names in identifiers in C++11

- by Jan Hudec

The new C++ standard specifies universal character names, written as \uNNNN and \UNNNNNNNN and representing the characters with unicode codepoints NNNN/NNNNNNNN. This is useful with string literals, especially since explicitly UTF-8, UTF-16 and UCS-4 string literals are also defined. However, the universal character literals are also allowed in identifiers. What is the motivation behind that? The syntax is obviously totally unreadable, the identifiers may be mangled for the linker and it's not like there was any standard function to retrieve symbols by name anyway. So why would anybody actually use an identifier with universal character literals in it?

Read the article

Looking for a non-cryptographic hash function that returns a single character

- by makerofthings7

Suppose I have a dictionary of ASCII words stored in uppercase. I also want to save those words into separate files so that the total word count of each file is approximately the same. By simply looking at the word I need to know which file it should be in (if it's there at all). Duplicate words should go into the same file and overwrite the last one. My first attempt at solving this problem is to use .NET's object.GetHashCode() function and .Trim() to get one of the "random" characters that pop up. I asked a similar question here If I only use one character of object.GetHashCode() I would get a hash code character of A..Z or 0..9. However saving the result of GetHashCode to disk is a no-no so I need a substitute. Question: What algorithm (or subset of an algorithm) is appropriate for pigeonholing strings into a single character or range of characters (Like hex 0..F offers 16 chars)? Real world usage: I'll use this answer to modify the Partition key used in Azure Table storage as described here

Read the article

Column break in word - continously

- by Holian

Masters, I need to PASTE my content in two different column in word. (I have 300 page of old content and 300 page of new content, i want to share my partners this information side by side to compare) I made two column and instert a column break, but i have to insert column break every page? How can i do this easier? Any way to insert column break continously, so i just need to copy&paste the contents into the columns? thank you

Read the article

Nginx rewrites - When does one use the break flag (pattern target break)?

- by anonymous-one

The nginx wiki states: break - completes processing of current rewrite directives and non-rewrite processing continues within the current location block only. Is this to say that: If the rewrite pattern matches, process the rewrite (rewrite to target) but do not process any of the other rules in the location block, and process all other (cache, proxy, etc) directives in the location block? I am talking about the break flag as per: PATTERN TARGET FLAG Not the "break;" directive. Thanks.

Search Results

Search found 10604 results on 425 pages for 'character break'.

Page 6/425 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13 | Next Page >

- by TiansHUo

- by user1288851

- by Avinash

- by Pangea

- by user3688163

- by sid_com

- by hm0429

- by Vulgrin

- by klaus.fabian

- by Saif Bechan

- by bitcycle

- by Damon

- by The Kaykay

- by Abdullah Sorathia

- by Jen

- by Steven Davelaar

- by Michal Bozydar Pawlowski

- by Jan Hudec

- by The415

- by Jan Hudec

- by makerofthings7

- by Holian

- by anonymous-one

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13 | Next Page >