Search Results

Search found 4137 results on 166 pages for 'hda intel'.

Page 6/166 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Intel Pentium D & Intel Core 2 Duo

  - by Paul

  Is Intel Pentium D and Intel Core 2 Duo is the same? Please reply.. Thanks!!! God Bless u All..

  Read the article

• Are Intel HD 4000 graphics supported on Ubuntu 10.04 LTS?

  - by user1118764

  I have an intel Core i7-3700 system with Intel HD 4000 integrated graphics with a dual monitor setup (1 connected via VGA, the other via DVI) on Ubuntu 10.04 LTS 64bit. I'm trying to get my monitors correctly detected. Right now, in only 1 unknown monitor is detected with a max resolution of 1280x1024, which is lower than my main monitor connected to DVI. Also, the desktop is mirrored rather than extended. I've previously managed to get a Core i5-2400 system with Intel HD 3000 integrated graphics with the same dual monitor setup and Ubuntu 10.04 LTS 64bit to work using the glasen ppa drivers, but this time, after installing them following the instructions How do I install the Intel HD 3000 video driver? but it doesn't seem to work. Does the Intel HD 4000 require a different driver from the 3000? If so, where can I get it?

  Read the article

• How can fix HDMI HDTV overscan when I my TV has no aspect ratio setting?

  - by Colin Dean

  I have a 32" Vizio HDTV. It's a few years old, but running well. I just connected a new nettop to it using HDMI out. It's the Intel 3x00 graphics chipset. I'm seeing overscan, where the resolution in Ubuntu is set to 1280x720, but the TV itself is 1366x768. When I go into the Monitors control applet, I cannot change the resolution to anything other than the current or 640x480. A user had a similar overscan problem, but fixed the overscan by adjusting his TV's aspect ratio settings. I do not have that luxury. Is there a way I can do this without having to delve into xorg.conf or other command-line craziness? I'm more than comfortable doing so, but there must be a cleaner way. I'm running Ubuntu Natty, keeping up with updates and such. Here's the output of lspci: colin@bricktop:~$ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:04.0 Signal processing controller: Intel Corporation Core Processor Thermal Management Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

  - by Deleted

  I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it). The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826. When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created. Questions: Is there a VIB file for the RAID controller I can use? I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

  Read the article

• Intel Core i5-2467m - Turbo Boost not activating?

  - by Trevor Sullivan

  I have a Samsung Series 5 laptop with an Intel Core i5-2467m process @ 1.6Ghz. The processor supports Intel Turbo Boost up to 2.30 Ghz according to the specifications. The i5-2467m is a dual-core process with HyperThreading, so there is a total of four (4) virtual cores in Windows 7 SP1. http://ark.intel.com/products/56858/ I've installed the Intel Turbo Boost Technology Monitor v2.6 to monitor if Turbo Boost is enabled, and set it to "Always On Top." I followed this process to max out the CPU: Open (4x) PowerShell instances Set each instance's affinity to a distinct CPU vCore Ran this code in each instance: while (1 -eq 1) { } Unfortunately, after maxing out all 4 cores, my laptop got hot, but Turbo Boost never kicked in. Any ideas on how to ensure that I'm getting the 2.3Ghz Turbo Boost capability of my laptop?

  Read the article

• Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

  - by GregC

  I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

  Read the article

• S5000XVN Intel Motherboard - Only sees 12 out of 16GB of RAM

  - by Richie086

  So I have an older Intel S5000XVN motherboard, here are the specs CPU Arch : 2 CPU - 2 Cores - 2 Threads CPU PSN : Intel Xeon CPU 5160 @ 3.00GHz CPU EXT : MMX, SSE (1, 2, 3, 3S), EM64T, VT-x CPUID : 6.F.6 / Extended : 6.F CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 4096 KB Core : Woodcrest (65 nm) / Stepping : B2 Freq : 2985.21 MHz (331.69 * 9) MB Brand : Intel MB Model : S5000XVN NB : Intel 5000X rev 31 SB : Intel 6321ESB rev 09 RAM : 16384 MB FB-DDR2 RAM Speed : 331.7 MHz (1:1) @ N/A Slot 1 : 2048MB (5300) Slot 1 Manufacturer : Kingston Slot 2 : 2048MB (5300) Slot 2 Manufacturer : Qimonda Slot 3 : 2048MB (5300) Slot 3 Manufacturer : Kingston Slot 4 : 2048MB (5300) Slot 4 Manufacturer : Qimonda Slot 5 : 2048MB (5300) Slot 5 Manufacturer : Kingston Slot 6 : 2048MB (5300) Slot 6 Manufacturer : Qimonda As you can clearly see, CPU-Z says I have 16GB of PC2-5300 RAM installed. For some reason in both BIOS and in Windows the maximum usable RAM is 12GB instead of 16GB. I have a dedicated video card connnected, so it can't be stealing RAM to use for the GPU (the S5000XVN does not have any onboard video). I am running Windows Server 2008 R2 x64 as the primary OS - so there should not be a memory limitation imposed on me from the OS. Has anyone experienced this before? Any ideas on how I can actually use all 16GB of RAM? I plan on using this machine to use for a Hyper-V server and have x2 Quad Core Xeon CPUs on the way as I write this post.

  Read the article

• installing mac os on intel [closed]

  - by bassha

  Possible Duplicate: Installing Mac OS X on Non Apple Hardware hello i have an intel based computer, it's hp pavillion dv6000, it's cpu is 1.6ghz duocore and has 1GB of ram. i installed the mac os x leopard for intel on it, on a 12GB partition, but it's not working. i can boot to the mac and the os display a picture and a welcoming song then it stop doing anything. does the mac os x need a special intel requirements?

  Read the article

• Intel atom and overall power consumption

  - by amorfis

  I am considering buying of Intel Atom machine. Power consumption is one of my concerns (it is for small server). I know CPU itself consumes a little power, but I heard that chipset consumes much more. Anybody knows how much can such machine consume? I am considering Intel MoBo BLKD945GCLF (chipset: Intel® 945GC Express Chipset with ICH7)

  Read the article

• Intel hd or Mobility Radeon?

  - by Absolute0

  I have decided to get a new Dell Studio 15 laptop. They have an option of adding a "ATI Mobility Radeon™ HD 4570, 512MB" card for an extra $100 instead of the included "Intel HD Graphics" card. How do the two compare? The laptop comes with an Intel Core i3 processor, maybe the Intel graphics card would be more compatible with the processor since they're made by the same manufacturer? Thanks in advance!

  Read the article

• Intel HD 4000 and Nvidia GT 650 working together on laptop

  - by Juan

  My new win7 Acer notebook has i5 CPU with Intel HD 4000 and Nvida GT650 GPU. Obviously monitor is plugged to Intel HD. In Nvidia control panel I can configure PhysX but that doesn't help. Windows system rating shows high gaming experience and average/low windows aero experience. What does that mean? Does my laptop use nvidia for games/3d apps nad Intel HD 4000 for aero? Should I disable Intel HD in bios, but how to plug monitor to nvidia? Or should I leave everything like now because everything works as it suppose to work? Here is image capture of some states: http://oi47.tinypic.com/34p0qp4.jpg

  Read the article

• Bastion unexpectedly exits when I move my cursor

  - by user69358

  I downloaded the Humble Indie Bundle V, mostly because my friend told me about how great Bastion was. When I first installed it, I was getting the seemingly common "black screen" error that most people got (fixed that half with this http://ubuntuforums.org/showthread.php?p=11992661). But I also have an error where every time I move my cursor, in any direction, any amount, the game closes instantly. I can use the keyboard no problem, but without fail, every time I move my mouse, it crashes. Does anyone know what might be causing this? Has anyone encountered anything like this before? I am worried it may be a hardware issue, but hoping someone might be able to help me out. I'm running Ubuntu 12.04 on a Dell Studio 1558. Graphics card is the stock Intel graphics card, running on 4 GB of RAM.

  Read the article

• Issues with Dz77BH-55K Motherboard and i7 processor on 12.04

  - by Naveed

  I just built a computer with Intel's DZ77BH-55K motherboard with i7-3770 processor. On 12.04, 11.10, and 11.04 and Linux Mint 12, the computer has been really laggy. The graphics aren't working (choppy effects, bad resolution) and the keyboard and mouse inputs are even laggy and unreliable (skips keystrokes). I'm not sure what the problem is or what I can do to fix it. I tried sudo apt-get install mesa-utils but nothing changed. I've also messed around in the BIOS but no luck there either. Any ideas? Could it possibly be a hardware issue?

  Read the article

• Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

  - by Sven

  After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

  Read the article

• Multiple Audio Issues

  - by Lerp

  I am having issues with my audio on Ubuntu 12.04, I will try and give as much detail as possible so sorry if there's too much detail. The Problem Audio plays from both speakers and headphone regardless of what connector I choose and regardless of the profile I use. The microphone is constantly being played through headphones & speakers. The headphone audio is extremely quiet but plays from both ears when I select "Headphones" for the connector in Sound Settings. The headphone audio only plays from one ear and is quiet (but not as quiet as above) when I select "Analogue Output" for the connector in Sound Settings. I can only select "Headphones" as the connector in Sound Settings if I set the profile to either "Analogue Stereo Output/Duplex", all others only allow me to choose "Analogue Output" for the connector. Despite the headphone sound issues, the speaker sound is fine apart from the fact that I am not able to select which output is used, they just both play. My headphone and microphone are plugged into the front and my speakers are plugged into the back. What I have tried I have put everything in alsamixer to 100 apart from "Front Mic Boost" which I have set to 0. Command Output aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 arecord -l **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 2/3 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf7ff8000 irq 70 cat /proc/asound/modules 0 snd_hda_intel cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 Hopefully I have provided enough information, I will happily provide anymore information needed. Thank you. Update Reinstalling alsa-base and pulseaudio fixed the headphone issues I was having.

  Read the article

• HDA NVidia (GT520) - Sound Issue

  - by Oliver Lucas

  I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

  Read the article

• Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

  - by Jeff Carr

  I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• How do i disable intel graphics in a hybrid graphics setup?

  - by Eshwar

  Hi, I have a Dell Vostro 3700 version A10. The relevant bits from lspci -v | grep VGA are: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) and 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 330M] (rev a2) so as you can see this is one of those hybrid graphics laptops. Now, I have no interest in any kind of switching. I would like to completely disable the Intel Graphics thats on the processor. I checked in the xorg.log file and it shows that the intel card is in use. from lsmod i see it uses the i915 module. I tried blacklisting that module in /etc/modprobe.d/blacklist.conf but that didn't really work because i still couldn't use the nvidia card for display. I wish there was a BIOS option to disable, but there isn't. Some people have also suggested changing the SATA mode to compatibility, but that does not work either in this case as the intel vga controller still shows up in lspci I tried setting the busid manually in the /etc/X11/xorg.conf file but it still didn't work. It gave me an error that said something along the lines of screen not detected. any bits of xorg.log that you'd like me to attach? So what I am looking for is some solution that allows me to completely disable the use of the intel vga controller. if it was blocked somehow it'd be nice. as if it were not present. Any suggestions? I am desperate here actually. Because I cannot use the HDMI port right now on my laptop for that reason. My guess is this applies to desktops that also have Core i5 processors with onchip graphics as well as dedicated graphics cards. How would they go about solving the problem?

  Read the article

• How to manage two video cards on a laptop (ATI and Intel)?

  - by Marc-François Cochaux-Laberge

  I have a laptop with two video cards. One ATI and on integrated Intel. On Windows, I can choose which video card I want to use. For example, I use the Intel card for normal use and for gaming, I switch to my ATI card for better performance, but a shorter battery life. In Ubuntu 10.10, only the Intel driver is installed, the ATI driver for my card doesn't work at all and there's heat coming out of my computer all the time, like when I'm playing video games on Windows. I think both cards are active, but only the Intel one is usefull. How can I solve this by making sure Ubuntu is aware of the two video cards and by disabling my ATI. Or may be I am all wrong about this?

  Read the article

• How do I configure an Intel HD Graphics 4000?

  - by derabbink

  First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

  Read the article

• Intel P6100 CPU and Mobile Intel® HM55 Express Chipset

  - by Christopher Painter

  I have an Asus K52F-BBR5 notebook that uses an Intel P6100 ( 2GHZ 15x multiplier) and HM55 Express Chipset. I'm looking to replace it's 3GB with 8GB. The Crucial database seems to indicate that a PC3-8500 CAS 7 and PC3-10666 CAS 9 will both work. I'm not up to date on the latest DDR3 nomencalature and I'm wondering which would provide better performance. The price difference is negligible. Drawing on past experiences from many many years ago I could make an argument for either based on sync/async bus speed arguments and CAS latency differences but the truth is I don't know enough about the HM55 chipset to know which would be the correct choice. Does anyone know the answer or point me to information that would help me make the choice? I'm pretty sure the performance difference will be somewhat negligible also but still I'd like to make the optimal choice.

  Read the article

• MAC OS for Intel based PCs

  - by Maven

  I have an Intel dual core PC with 4GB of RAM and Graphics card. For on of my student Assignment I need to install Latest possible MAC OS on my system as a secondary OS. Like on boot it asks me that which OS i want to boot with Win 8.1 or Mac Os.. I searched on the internet and found two conflicting opinion some people said there are few MAC OS Version which can be directly installed on Intel PCs some says there aren't? I am here to get rid of the confusion that is an official latest possible MAC OS version for Intel based PCs? If not what are my options if I want to run MAC OS on my PC. Please not that Virtualization options won’t work for me, it has to be working as full OS not an os inside another.

  Read the article

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• Can't get Optimus to work with Ironhide on an Asus N53SN

  - by Musaab

  I installed Ubuntu 11.10 (Same issue in 11.04 btw) and then I installed Ironhide. I went through the configuration, chose the one with the highest confirmation for my system and tested it: > Error: Module nvidia does not exist in /proc/modules > P50 Disabling nVidia Card Succeded (the spelling error is theirs) And it changes nothing. I tried other configurations and got worse results. This has really become a major headache. Any solutions?

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >