Search Results

Search found 478 results on 20 pages for 'tilt sensor'.

Page 6/20 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• Mind Reading with the Raspberry Pi

  - by speakjava

  Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi".  As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi.  This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky.  I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology.  At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready.  The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up.  Part of Neurosky's innovation is the development of this simple dry-sensor technology.  Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication.  Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0.  Neurosky have published details of the command protocol.  In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going.  Back in the dim distant past there was the Java Comm API.  Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm.  This can be installed easily on the Pi using sudo apt-get install librxtx-java.  Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset.  The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset.  You can download a complete NetBeans project for this here.  This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux.  I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset.  Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi.  I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX.  Yet another NetBeans project is available here.  Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on.  Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

  Read the article

• At the Java DEMOgrounds - Oracle Java ME Embedded Enables the “Internet of Things”

  - by Janice J. Heiss

  I caught up with Oracle’s Robert Barnes, Senior Director, Java Product Management, who was demonstrating a new product from Oracle’s Java Platform, Micro Edition (Java ME) product portfolio, Oracle Java ME Embedded 3.2, a complete client Java runtime optimized for microcontrollers and other resource-constrained devices. Oracle’s Java ME Embedded 3.2 is a Java ME runtime based on CLDC 1.1 (JSR-139) and IMP-NG (JSR-228).“What we are showing here is the Java ME Embedded 3.2 that we announced last week,” explained Barnes. “It’s the start of the 'Internet of Things,’ in which you have very very small devices that are on the edge of the network where the sensors sit. You often have a middle area called a gateway or a concentrator which is fairly middle to higher performance. On the back end you have a very high performance server. What this is showing is Java spanning all the way from the server side right down towards the type of chip that you will get at the sensor side as the network.” Barnes explained that he had two different demos running.The first, called the Solar Panel System Demo, measures the brightness of the light.  “This,” said Barnes, “is a light source demo with a Cortex M3 controlling the motor, on the end of which is a sensor which is measuring the brightness of the lamp. This is recording the data of the brightness of the lamp and as we move the lamp out of the way, we should be able using the server to turn the sensor towards the lamp so the brightness reading will go higher. This sends the message back to the server and we can look at the web server sitting on the PC underneath the desk. We can actually see the data being passed back effectively through a back office type of function within a utility environment.” The second demo, the Smart Grid Response Demo, Barnes explained, “has the same board and processor and is still using Java ME embedded with a different app on top. This is a demand response demo. What we are seeing within the managing environment is that people want to track the pricing signals of the electricity. If it’s particularly expensive at any point in time, they may turn something off. This demo sets the price of the electricity as though this is coming from the back of the server sending pricing signals to my home.” The demo had a lamp and a fan and it was tracking the price of electricity. “If I set the price of the electricity to go over 5 cents, then the device will turn off,” explained Barnes. “I can go into my settings and, in this case, change the price to 50 cents and we can wait a minus and the lamp will go off. When I change the pricing signal so that it is lower, the lamp will come back on. The key point is that the Java software we have running is the same across all the different devices; it’s a way to build applications across multiple devices using the same software. This is important because it fixes peak loading on the network and can stops blackouts.” This demo brought me back to a prior decade when Sun Microsystems first promoted  Jini technology, a version of Java that would put everything on the network and give us the smart home. Your home would be automated to tell you when you were out of milk, when to change your light bulbs, etc. You would have access to the web and the network throughout your home.It’s interesting to see how technology moves over time – from the smart home to the Internet of Things.

  Read the article

• Using Hidden Markov Model for designing AI mp3 player

  - by Casper Slynge

  Hey guys. Im working on an assignment, where I want to design an AI for a mp3 player. The AI must be trained and designed with the use of a HMM method. The mp3 player shall have the functionality of adapting to its user, by analyzing incoming biological sensor data, and from this data the mp3 player will choose a genre for the next song. Given in the assignment is 14 samples of data: One sample consist of Heart Rate, Respiration, Skin Conductivity, Activity and finally the output genre. Below is the 14 samples of data, just for you to get an impression of what im talking about. Sample HR RSP SC Activity Genre S1 Medium Low High Low Rock S2 High Low Medium High Rock S3 High High Medium Low Classic S4 High Medium Low Medium Classic S5 Medium Medium Low Low Classic S6 Medium Low High High Rock S7 Medium High Medium Low Classic S8 High Medium High Low Rock S9 High High Low Low Classic S10 Medium Medium Medium Low Classic S11 Medium Medium High High Rock S12 Low Medium Medium High Classic S13 Medium High Low Low Classic S14 High Low Medium High Rock My time of work regarding HMM is quite low, so my question to you is if I got the right angle on the assignment. I have three different states for each sensor: Low, Medium, High. Two observations/output symbols: Rock, Classic In my own opinion I see my start probabilities as the weightened factors for either a Low, Medium or High state in the Heart Rate. So the ideal solution for the AI is that it will learn these 14 sets of samples. And when a users sensor input is received, the AI will compare the combination of states for all four sensors, with the already memorized samples. If there exist a matching combination, the AI will choose the genre, and if not it will choose a genre according to the weightened transition probabilities, while simultaniously updating the transition probabilities with the new data. Is this a right approach to take, or am I missing something ? Is there another way to determine the output probability (read about Maximum likelihood estimation by EM, but dont understand the concept)? Best regards, Casper

  Read the article

• jquery: how can i load the Google Maps API via ajax?

  - by Haroldo

  Before you reply: this is not as straight foward as you'd expect! I have a 'show on map' button which when clicked opens a dialogbox/lightbox with the google map in. I don't want to load the maps api on pageload, just when a map has been requested This is php file the "show on map" button puts into the dialog box: <div id="map_canvas"></div> <script type="text/javascript"> $(function() { //google maps stuff var latlng = new google.maps.LatLng(<?php echo $coords ?>); var options = { zoom: 14, center: latlng, mapTypeControl: false, mapTypeId: google.maps.MapTypeId.ROADMAP }; var map = new google.maps.Map(document.getElementById('map_canvas'), options); var marker = new google.maps.Marker({ position: new google.maps.LatLng(<?php echo $coords ?>), map: map }); }) </script> I've been trying to load the API before ajaxing in the dialog like this: $('img.map').click(function(){ var rel = $(this).attr('rel'); $.getScript('http://maps.google.com/maps/api/js?sensor=false', function(){ $.fn.colorbox({ href:rel }) }); }) this doesn't seem to work :( i've also tried: adding <script src="http://maps.google.com/maps/api/js?sensor=false"></script> to the ajax file type="text/javascript" running $.getScript('http://maps.google.com/maps/api/js?sensor=false'); on doc.ready the problem the browser seems to be redirected to the api.js file - you see a white screen

  Read the article

• @PrePersist with entity inheritance

  - by gerry

  I'm having some problems with inheritance and the @PrePersist annotation. My source code looks like the following: _the 'base' class with the annotated updateDates() method: @javax.persistence.Entity @Inheritance(strategy = InheritanceType.TABLE_PER_CLASS) public class Base implements Serializable{ ... @Id @GeneratedValue protected Long id; ... @Column(nullable=false) @Temporal(TemporalType.TIMESTAMP) private Date creationDate; @Column(nullable=false) @Temporal(TemporalType.TIMESTAMP) private Date lastModificationDate; ... public Date getCreationDate() { return creationDate; } public void setCreationDate(Date creationDate) { this.creationDate = creationDate; } public Date getLastModificationDate() { return lastModificationDate; } public void setLastModificationDate(Date lastModificationDate) { this.lastModificationDate = lastModificationDate; } ... @PrePersist protected void updateDates() { if (creationDate == null) { creationDate = new Date(); } lastModificationDate = new Date(); } } _ now the 'Child' class that should inherit all methods "and annotations" from the base class: @javax.persistence.Entity @NamedQueries({ @NamedQuery(name=Sensor.QUERY_FIND_ALL, query="SELECT s FROM Sensor s") }) public class Sensor extends Entity { ... // additional attributes @Column(nullable=false) protected String value; ... // additional getters, setters ... } If I store/persist instances of the Base class to the database, everything works fine. The dates are getting updated. But now, if I want to persist a child instance, the database throws the following exception: MySQLIntegrityConstraintViolationException: Column 'CREATIONDATE' cannot be null So, in my opinion, this is caused because in Child the method "@PrePersist protected void updateDates()" is not called/invoked before persisting the instances to the database. What is wrong with my code?

  Read the article

• Computer sponteously reboots when doing heavy file copy to/from disk

  - by Mark Hosang

  I've been fighting with this problem for the last 3 weeks where my machine will just instantly reboot. No BSOD, and when i checked the event log all that was reported was the generic "Kernal-power" error with the detailed information pointing to a hard crash. This is a machine that was working for 18 months before these crashes started happening. When they started happening is after I added 3 HDs in a RAID-5, upped the memory to 12gb, moved to a new house, added a SSD and added about 5 case fans. I have thus eliminated the RAID, and determined that the SSD was not the cause (because it was still crashing even though the ssd wasn't connected). I've run memtest several times over night with no memory problems showing up. I've run IntelBurnTest to max out the cpu to see if it was a heat issue and at full tilt after 20 min it was only at 85C and the machine didn't crash. I also took a look at the voltages during this test, with a screenshot at the bottom of this post I've ruled out a software issue by reinstalling windows 7 ultimate x64 a total of 5 times, but even during that the install it crashes. Happens sometime during file copying at the beginning, or during uncompressing files, or sometimes during running windows update. The only discernible pattern i can see is that it seems to crash when hard disks might be spinning up or when they are accessed heavily from large file transfers. My current guess is that it is probably an issue with the MB, PSU or the power coming through the outlet. Any suggestions of what i could try to troubleshoot or what may be wrong? Specs PSU: Seasonic M12 700w Mem: 12gb CPU: i7-920 with stock heatsink MB: Asus P6T HDs: 3 green WD and 1 Corsair force 3 120b with 1.3.3 firmware Running full tilt voltages Idling Voltages

  Read the article

• XOLO X900–First mobile phone with Intel Power

  - by Rekha

  XOLO X900, XOLO’s offering the world’s first smart phone with the power of Intel inside® shaking hands with LAVA International Ltd., India’s fastest growing handset brands. The R&D Centre is in Shenzhan (China) and Bangalore (India). The smart phone has a fast web browsing with the 1.6 GHz Intel processor and smooth multi-tasking process using Intel patented Hyper Threading technology.It has an optimum battery usage, 4.03” hi-resolution of 1024X600 pixels LCD screen to ensure crisp text and vibrant images, HDMI Output port for TV, full HD 1080p playback and dual speakers. It has a camera of 8MP HD camera with certain DSLR like features allowing to click upto 10 photos in less than a second. 3D and HD gaming is immensely realistic with 400 MHz Graphics Processing Unit. The Operating System used here is Android 2.3 (Gingerbread) and upgradable to Android 4.0. It has the GPS facility and rear and front cameras with 8MP and 1.3MP respectively.  They have enabled Accelerometer, Gyroscope, Magnetometer, Ambient light sensor and Proximity sensor in this smart phone. Intel’s smartphone venture is beginning in India first. It is said to be available for sale in Indian from April 23, 2011 onwards. The price is at a best-buy price of INR 22,000 approximately. The smartphone will be available at the Indian retail chain Croma. The phone will available in other retail stores and online stores from early May. The company is launching the smartphone in India first and a more powerful handset in China later this year. According to their success in India and China, Intel is planning to come into Europe and US market. Till then, Intel smartphones are only for Indian buyers. You can more technical information from the XOLO’s site.

  Read the article

• What are the differences between the Fujitsu ScanSnap S300 and the S1300?

  - by Techboy

  Please can you tell me what the technical differences are between the Fujitsu ScanSnap S300 and the S1300 scanners? S300 = http://www.fujitsu.com/emea/products/scanners/scansnap/tmpl_scanners_scansnap-S300.html S1300 = http://www.fujitsu.com/emea/products/scanners/scansnap/tmpl_scanners_scansnap-S1300.html The only difference I can see is that the S300 has a CCD Image Sensor and the S1300 has a CIS Image Sensor. Other than that, the resolutions, pages per minute and physical sizes of both models are exactly the same. If so, is there a reason why I would want the S1300 instead of the cheaper S300? I just want a scanner for duplex document scanning, for home use (documents, receipts, etc.).

  Read the article

• Activate Your Monitor via Motion Trigger

  - by ETC

  Most people are in the habit of jiggling their mouse or tapping their keyboard when they want to wake their monitor. This clever electronics hack adds a sensor to your computer for motion-based monitor activation. At the DIY and electronics blog Radio Etcetera they tackled an interesting project and shared the build guide. Their local volunteer fire department needed a monitor on for quick information checks but they didn’t need it on all the time and they didn’t want to have to walk over and activate the monitor when they needed it. The solution involved hacking a simple infrared security sensor and wiring it via USB to send a mouse command when motion is detected in the room. Fire fighter walks in, monitor turns on and displays information; fire fighter leaves and the monitor goes back to sleep. Hit up the link below to see additional photos, schematics, and the complete build guide. Motion Activated PC Monitor [Radio Etcetera via Hack A Day] Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Lucky Kid Gets Playable Angry Birds Cake [Video] See the Lord of the Rings Epic from the Perspective of Mordor [eBook] Smart Taskbar Is a Thumb Friendly Android Task Launcher Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic]

  Read the article

• 2D Collision masks for handling slopes

  - by JiminyCricket

  I've been looking at the example at: http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel and am trying to figure out how to adjust the sprite once a collision has been detected. As David suggested at XNA 4.0 2D sidescroller variable terrain heightmap for walking/collision, I made a few sensor points (feet, sides, bottom center, etc.) and can easily detect when these points actually collide with non-transparent portions of a second texture (simple slope). I'm having trouble with the algorithm of how I would actually adjust the sprite position based on a collision. Say I detect a collision with the slope at the sprite's right foot. How can I scan the slope texture data to find the Y position to place the sprite's foot so it is no longer inside the slope? The way it is stored as a 1D array in the example is a bit confusing, should I try to store the data as a 2D array instead? For test purposes, I'm thinking of just using the slope texture alpha itself as a primitive and easy collision mask (no grass bits or anything besides a simple non-linear slope). Then, as in the example, I find the coordinates of any collisions between the slope texture and the sprite's sensors and mark these special sensor collisions as having occurred. Finally, in the case of moving up a slope, I would scan for the first transparent pixel above (in the texture's Ys at that X) the right foot collision point and set that as the new height of the sprite. I'm a little unclear also on when I should make these adjustments. Collisions are checked on every game.update() so would I quickly change the position of the sprite before the next update is called? I also noticed several people mention that it's best to separate collision checks horizontally and vertically, why is that exactly? Open to any suggestions if this is an inefficient or inaccurate way of handling this. I wish MSDN had provided an example of something like this, I didn't know it would be so much more complex than NES Mario style pure box platforming!

  Read the article

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• Keeping a domain model consistent with actual data

  - by fstuijt

  Recently domain driven design got my attention, and while thinking about how this approach could help us I came across the following problem. In DDD the common approach is to retrieve entities (or better, aggregate roots) from a repository which acts as a in-memory collection of these entities. After these entities have been retrieved, they can be updated or deleted by the user, however after retrieval they are essentially disconnected from the data source and one must actively inform the repository to update the data source and make is consistent again with our in-memory representation. What is the DDD approach to retrieving entities that should remain connected to the data source? For example, in our situation we retrieve a series of sensors that have a specific measurement during retrieval. Over time, these measurement values may change and our business logic in the domain model should respond to these changes properly. E.g., domain events may be raised if a sensor value exceeds a predefined threshold. However, using the repository approach, these sensor values are just snapshots, and are disconnected from the data source. Does any of you have an idea on how to solve this following the DDD approach?

  Read the article

• program blender, how to use control some the armature bones

  - by powerful

  How to control some of the armature bones all selected through the sensor logic brick as alway.

  Read the article

• Does this sound like a stack overflow?

  - by Jordan S

  I think I might be having a stack overflow problem or something similar in my embedded firmware code. I am a new programmer and have never dealt with a SO so I'm not sure if that is what's happening or not. The firmware controls a device with a wheel that has magnets evenly spaced around it and the board has a hall effect sensor that senses when magnet is over it. My firmware operates the stepper and also count steps while monitoring the magnet sensor in order to detect if the wheel has stalled. I am using a timer interrupt on my chip (8 bit, 8057 acrh.) to set output ports to control the motor and for the stall detection. The stall detection code looks like this... // Enter ISR // Change the ports to the appropriate value for the next step // ... StallDetector++; // Increment the stall detector if(PosSensor != LastPosMagState) { StallDetector = 0; LastPosMagState = PosSensor; } else { if (PosSensor == ON) { if (StallDetector > (MagnetSize + 10)) { HandleStallEvent(); } } else if (PosSensor == OFF) { if (StallDetector > (GapSize + 10)) { HandleStallEvent(); } } } this code is called every time the ISR is triggered. PosSensor is the magnet sensor. MagnetSize is the number of stepper steps that it takes to get through the magnet field. GapSize is the number of steps between two magnets. So I want to detect if the wheel gets stuck either with the sensor over a magnet or not over a magnet. This works great for a long time but then after a while the first stall event will occur because 'StallDetector (MagnetSize + 10)' but when I look at the value of StallDetector it is always around 220! This doesn't make sense because MagnetSize is always around 35. So the stall event should have been triggered at like 46 but somehow it got all the way up to 220? And I don't set the value of stall detector anywhere else in my code. Do you have any advice on how I can track down the root of this problem? The ISR looks like this void Timer3_ISR(void) interrupt 14 { OperateStepper(); // This is the function shown above TMR3CN &= ~0x80; // Clear Timer3 interrupt flag } HandleStallEvent just sets a few variable back to their default values so that it can attempt another move... #pragma save #pragma nooverlay void HandleStallEvent() { ///* PulseMotor = 0; //Stop the wheel from moving SetMotorPower(0); //Set motor power low MotorSpeed = LOW_SPEED; SetSpeedHz(); ERROR_STATE = 2; DEVICE_IS_HOMED = FALSE; DEVICE_IS_HOMING = FALSE; DEVICE_IS_MOVING = FALSE; HOMING_STATE = 0; MOVING_STATE = 0; CURRENT_POSITION = 0; StallDetector = 0; return; //*/ } #pragma restore

  Read the article

• AccelerometerInput XNA GameComponent

  - by Michael B. McLaughlin

  Bad accelerometer controls kill otherwise good games. I decided to try to do something about it. So I create an XNA GameComponent called AccelerometerInput. It’s still a beta project but you are welcome to try it, use it, modify it, etc. I’m releasing under the terms of the Microsoft Public License. Important info: First, it only supports tilt-style controls currently. I have not implemented motion-style controls yet (and make no promises as to when I might find time to do so). Second, I commented it heavily so that you can (hopefully) understand what it is doing. Please read the comments and examine the sample game for a usage overview. There are configurable parameters which I encourage you to make use of (both by modifying the default values where your testing shows it to be appropriate and also by implementing a calibration mechanism in your game that lets the user adjust those configurable values based on his or her own circumstances). Third, even with this code, accelerometer controls are still a fairly advanced topic area; you will likely find nothing but disappointment if you simply plunk this into some project without testing it on a device (or preferably on several devices). Fourth, if you do try this code and find that something doesn’t work as expected on your phone, please let me know as I want to improve it and can only do so with your help. Let me know what phone model it is, what you tried doing, what you expected, and what result you had instead. I may or may not be able to incorporate it into the code, but I can let others know at the very least so that they can make appropriate modifications to their games (I’m hopeful that all phones are reasonably similar in their workings and require, at most, a slight calibration change, but I simply don’t know). Fifth, although I’ll do my best to answer any questions you may have about it, I’m very busy with a number of things currently so it might take a little while. Please look through the code and examine the comments and sample game first before asking any questions. It’s likely that the answer is in there. If not, or if you just aren’t really sure, ask away. Sixth, there are differences between a portrait-mode game and a landscape mode game (specifically in the appropriate default tilt adjustment for toward the user/away from the user calculations). This is documented and the default is set for landscape. If you use this for a portrait game, make the appropriate change (look for the TODO: comment in AccelerometerInput.cs). Seventh, no provision whatsoever is made for disabling screen locking. It is up to you to implement that and to take appropriate measures to detect when the user has been idle for too long and timeout the game. That code is very game-specific. If you have questions about such matters, consult the relevant MSDN documentation and, if you still have questions, visit the App Hub forums and ask there. I answer questions there a lot and so I may even stumble across your question and answer it. But that’s a much better forum than the comments section here for questions of that sort so I would appreciate it if you asked idle detection-related questions there (or on some other suitable site that you may be more familiar and comfortable with). Eighth, this is an XNA GameComponent intended for XNA-based games on WP7. A sufficiently knowledgeable Silverlight developer should have no problem adapting it for use in a Silverlight game or app. I may create a Silverlight version at some point myself. Right now I do not have the time, unfortunately. Ok. Without further ado: http://www.bobtacoindustries.com/developers/utils/AccelerometerInput.zip Have a great St. Patrick’s Day!

  Read the article

• CodePlex Daily Summary for Friday, January 21, 2011

  CodePlex Daily Summary for Friday, January 21, 2011Popular ReleasesTweetSharp: TweetSharp v2.0.0.0 - Preview 9: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for lists and suggested users Fixes based on user feedback Third Party Library VersionsHammock v1.1.6: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comjqGrid ASP.Net MVC Control: Version 1.2.0.0: jqGrid 3.8 support jquery 1.4 support New and exciting features Many bugfixes Complete separation from the jquery, & jqgrid codeMediaScout: MediaScout 3.0 Preview 4: Update ReleaseCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1: Coding4Fun.Phone.Toolkit v1MFCMAPI: January 2011 Release: Build: 6.0.0.1024 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeAutoLoL: AutoLoL v1.5.4: Added champion: Renekton Removed automatic file association Fix: The recent files combobox didn't always open a file when an item was selected Fix: Removing a recently opened file caused an errorRazorEngine: RazorEngine v2.0: IMPORTANT RazorEngine v2 is a complete rewrite of the templating framework. Because of this, there are no guarantees that code written around v1.2 will run without modification. The v2 framework is cleaner and refined. Please check the forthcoming codeplex site updates which will detail the new functionality. Features in v2: ASP.NET Medium Trust Support Custom Template Activation with Dependency Injection Support Subtemplating using the new @Include method. Known issues: @Include doe...DotNetNuke® Community Edition: 05.06.01: Major Highlights Fixed issue to remove preCondition checks when upgrading to .Net 4.0 Fixed issue where some valid domains were failing email validation checks. Fixed issue where editing Host menu page settings assigns the page to a Portal. Fixed issue which caused XHTML validation problems in 5.6.0 Fixed issue where an aspx page in any subfolder was inaccessible. Fixed issue where Config.Touch method signature had an unintentional breaking change in 5.6.0 Fixed issue which caused...MiniTwitter: 1.65: MiniTwitter 1.65 ???? ?? List ????? in-reply-to ???????? ????????????????????????? ?? OAuth ????????????????????????????ASP.net Ribbon: Version 2.1: Tadaaa... So Version 2.1 brings a lot of things... Have a look at the homepage to see what's new. Also, I wanted to (really) improve the Designer. I wanted to add great things... but... it took to much time. And as some of you were waiting for fixes, I decided just to fix bugs and add some features. So have a look at the demo app to see new features. Thanks ! (You can expect some realeses if bugs are not fixed correctly... 2.2, 2.3, 2.4....)iTracker Asp.Net Starter Kit: Version 3.0.0: This is the inital release of the version 3.0.0 Visual Studio 2010 (.Net 4.0) remake of the ITracker application. I connsider this a working, stable application but since there are still some features missing to make it "complete" I'm leaving it listed as a "beta" release. I am hoping to make it feature complete for v3.1.0 but anything is possible.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager changes: RenderView controller extension works for razor also live demo switched to razorBloodSim: BloodSim - 1.3.3.1: - Priority update to resolve a bug that was causing Boss damage to ignore Blood Shields entirelyRawr: Rawr 4.0.16 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of this release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. W...MvcContrib: an Outer Curve Foundation project: MVC 3 - 3.0.51.0: Please see the Change Log for a complete list of changes. MVC BootCamp Description of the releases: MvcContrib.Release.zip MvcContrib.dll MvcContrib.TestHelper.dll MvcContrib.Extras.Release.zip T4MVC. The extra view engines / controller factories and other functionality which is in the project. This file includes the main MvcContrib assembly. Samples are included in the release. You do not need MvcContrib if you download the Extras.Yahoo! UI Library: YUI Compressor for .Net: Version 1.5.0.0 - Jalthi: Updated solution to VS2010. New: Work Item #4450 - Optional MSBuild task parameter :: Do not error if no files were found. Fixed: Work Item #5028 - Output file encoding is the same as the optional MSBuild task encoding argument. Fixed: Work Item #5824 - MSBuilds where slow, after the first build due to the Current Thread being forced to en-gb, on none en-gb systems. Changed: Work Item #6873 - Project license changed from MS-PL to GPLv2. New: Added all the unit tests from the Java YU...N2 CMS: 2.1.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. 2.1.1 Maintenance release List of changes 2.1 Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open...VidCoder: 0.8.1: Adds ability to choose an arbitrary range (in seconds or frames) to encode. Adds ability to override the title number in the output file name when enqueing multiple titles. Updated presets: Added iPhone 4, Apple TV 2, fixed some existing presets that should have had weightp=0 or trellis=0 on them. Added {parent} option to auto-name format. Use {parent:2} to refer to a folder 2 levels above the input file. Added {title:2} option to auto-name format. Adds leading zeroes to reach the sp...Microsoft SQL Server Product Samples: Database: AdventureWorks2008R2 without filestream: This download contains a version of the AdventureWorks2008R2 OLTP database without FILESTREAM properties. You do not need to have filestream enabled to attach this database. No additional schema or data changes have been made. To install the version of AdventureWorks2008R2 that includes filestream, use the SR1 installer available here. Prerequisites: Microsoft SQL Server 2008 R2 must be installed. Full-Text Search must be enabled. Installing the AdventureWorks2008R2 OLTP database: 1. Cl...ASP.NET: ASP.NET MVC 3 Application Upgrader: This standalone application upgrades ASP.NET MVC 2 applications to ASP.NET MVC 3. It works for both ASP.NET MVC 3 RC 2 and RTM. The tool only supports Visual Studio 2010 solutions and MVC 2 projects targeting .NET 4. It will not work with VS 2008 solutions, MVC 1 projects, or projects targeting .NET 3.5. Those projects will first have to be upgraded using Visual Studio 2010 and/or retargeted for .NET 4. The tool will: Create a backup of your entire solution Update all Web Applications and ...New ProjectsAppCore: Setup application to create core components and services for .NET applications. The goal of AppCore is to provide a developer friendly installation that will let a dev choose an application type, dependency injection framework, testing and mocking framework, object relational mAsp.Net Performance: Asp.Net Performance?????????Asp.Net?????????????，?????????????????，??????????，???????????，???Issue Tracker????.BizTalk Context Adder Pipeline Component (BRE): BizTalk Context Property Adder pipeline component, which utilize BizTalk Rule Engine configuration.BKM: BKM is a software system to convert Arabic sign language to speech using computer vision technique developed by ROSHAR team as graduation project from computer science department supervised by Dr.Mohammad AnsariBlackJack: BlackJack is a Littel Game like 17+4. It's developed in VB.NET and WPF4. It is a Training Application from me to learn VB.NET and WPF4. C# RushHour Puzzle: RushHour Project uses the A* algorithm to solve instances of the Rush Hour puzzle. This involved implementing a graph-search version of A*, along with three heuristics, and testing the implementation on several Rush Hour puzzlesCoding4Fun Tools: This is a set of tools to make people's lifes easier. First up: Windows Phone 7 SilverlightEBP: Enterprise Basis Platform. Include Application Management, User Management, File Management, Permission, Workflow, Forms, Reporting, SSO, Real-Time Message, etc. It's developed in C#, based on .NET Framework 4.0.ETL with Talend for Aras Innovator PLM: This project is answering a lot of request about Aras Innovator on starting to use this PLM solution in a Pilot Project. The Aras migration tool is more advanced but reserved to subscribers. Using the Open Source ETL Talend Open Suite we will help to migrate any data to Aras.hg5build17501: hg5build17501Manager: The Multifunctional manager: -Friends -Contacts -Numbers -Websites -Credit cards/bank accounts -Passwords -Accounts (games/websites/forums) -Books -Magazines -Discs -MoremelodyMe - Unlimited Music Streaming: melodyMe is an application that allows music lovers to take their Music Library with them without needing to copy the music and install other software. This application uses internet sources to try and find tracks from servers on the web. It's developed in C#.Mint: Mint is a framework enabling fast and flexible modular programming in .NET Framework.navPic@Zure: navPic@Zure is simple photo sharing portal. This is project is purely aimed to create an end to end application to understand and get the hands dirty on Cloud technologies like Windows Azure, SQL Auzre, App Fabric etc...NHibernate 3.0 SQL Logger: NH3SQLLogger is a lightweight NHibernate 3 SQL Logger, with SQL Formatting, Caller methods loggings and Syntax highlighting.openPMU SynchroPhasor Sensor Project: openPMU is a Phasor Measurement Unit (PMU) sensor used to measure SynchroPhasors. The openPMU project's goal is to provide an open source PMU sensor that can be used for experimentation and, research. The openPMU sensor is developed for compatibility with the openPDC project.Orchard Typekit Module: A Typekit module for Orchard.PL_Fahrradverleih: PL_FahrradVerleih PMS ProjektSharePoint 2010 Social Connector: Project in draft.SimuMill3C: This is a 3C milling simulation software with error detection and G-Code generationSmart Skelta Web Logger: Smart Skelta Web logger is an alternative and web based solution for Skelta Logger Console.Since its web based application, many users can able to access simultaneously.It supports filtering the log items based on repository,workflow,etc. and user can navigate to old log entries.TeamWebSite: Sample code for the Team Web Site Application built with ASP.NET 4, Code First EF 4 and SQL CE 4.TextTemplate: A text templating class library for .NET 3.5 and 4.0 written in C#.tfs 2010 work item RSS Feed: tfs 2010 work item RSS Feed you can see work item assigned to you or to your subordinates and updates on work items you have createdTIMESHARE: N/AVB CPCC Class: I will be posting my projects for my class hererWindows Phone 7 Bing Maps CloudMade TileSource Sample: This project is designed to be a sample of how you can use Custom map tiles provided by CloudMade.com in the Bing Maps Windows Phone 7 Control. This give you the benefit of using one of the many thousands of pre created map styles at CloudMade.com or creating your own map styleZicuer: Test zicuer site??? ???: ????????? ???????

  Read the article

• Can you load Google Maps API v3 via Google AJAX API loader

  - by Salman A

  Some time ago I used the regular method of loading Google Maps API like this: <script type="text/javascript" src="http://maps.google.com/maps?file=api&v=2&key=abcdefg&sensor=true"> Later I switched to Google AJAX APIs to load Google Maps API. This was because a couple of "widgets" on my website needed the Google Ajax API loader so I chose to be consistent and used the AJAX APIs to load Google Maps as well: <script type="text/javascript" src="http://www.google.com/jsapi?key=abcdef"></script> <script type="text/javascript"> google.load("maps", "2", {"other_params": "sensor=true"}); </script> Now that I have finally decided to use Google Maps API v3, this page does not list API v3 in the available version list. None of the examples on API v3 documentation show the use of AJAX APIs as well. Is is possible (and supported) to load Google Maps API v3 via AJAX API loader?

  Read the article

• Google Maps API Geocode gives error "Invalid label" in Firefox

  - by Bennystijn

  Today I struggled with the following: $.ajax({url:'http://maps.google.com/maps/api/geocode/jsonaddress=Karachi&sensor=false&output=json&callback=?', dataType: 'json', success: function(data){ //eval("("+data+")"); alert(data); } }); Firefox gives the error "Invalid Label" and Chrome "Uncaught SyntaxError: Unexpected token :". I found a lot of posts about this, and I tried all kinds of things like eval(), but also: $.getJSON('http://maps.google.com/maps/api/geocode/jsonaddress=Karachi&sensor=false&output=json&callback=?', function(data){ //eval("("+data+")"); alert(data); } ); Same result. Also, other json data works fine, for instance flickr ("http://api.flickr.com/services/feeds/photos_public.gne?tags=cat&tagmode=any&format=json&jsoncallback=?). So it has something to do with the Google Maps API output i guess.. Thanks in advance.

  Read the article

• Accelerometer API for Laptops

  - by FreshCode

  Most IBM (and some Dell) laptops have built-in accelerometers to stop any moving parts during a sudden fall, but I was unable to find a standardised Windows API to access this data. I assume that each manufacturer would provide a driver to interface with the sensor. Which popular laptop brands come standard with accelerometers accessible from an API and which libraries should I use to access the data? Does an API* exist to abstract away the differences between different manufacturers? I am aware of the Windows 7 Sensor API, but I would like support for XP and earlier.

  Read the article

• Machine Learning Algorithm for Peer-to-Peer Nodes

  - by FreshCode

  I want to apply machine learning to a classification problem in a parallel environment. Several independent nodes, each with multiple on/off sensors, can communicate their sensor data with the goal of classifying an event as defined by a heuristic, training data or both. Each peer will be measuring the same data from their unique perspective and will attempt to classify the result while taking into account that any neighbouring node (or its sensors or just the connection to the node) could be faulty. Nodes should function as equal peers and determine the most likely classification by communicating their results. Ultimately each node should make a decision based on their own sensor data and their peers' data. If it matters, false positives are OK for certain classifications (albeit undesirable) but false negatives would be totally unacceptable. Given that each final classification will receive good or bad feedback, what would be an appropriate machine learning algorithm to approach this problem with if the nodes could communicate with each other to determine the most likely classification?

  Read the article

• Machine Learning Algorithm for Parallel Nodes

  - by FreshCode

  I want to apply machine learning to a classification problem in a parallel environment. Several independent nodes, each with multiple on/off sensors, can communicate their sensor data with the goal of classifying an event defined by a heuristic, training data or both. Each peer will be measuring the same data from their unique perspective and will attempt to classify the result while taking into account that any neighbouring node (or its sensors or just the connection to the node) could be faulty. Nodes should function as equal peers and determine the most likely classification by communicating their results. Ultimately each node should make a decision based on their own sensor data and their peers' data. If it matters, false positives are OK (albeit undesirable) but false negatives are totally unacceptable. Given that each final classification will receive good or bad feedback, what would be an appropriate machine learning algorithm to approach this problem with if the nodes could communicate with each other to determine the most likely classification?

  Read the article

• Disconnect a bluetooth socket in Android

  - by rejoperejo

  Hi, I'm developing a program in which, from an Android Phone, I have to connect as a client to a Bluetooth medical sensor. I'm using the official Bluetooth API and no problem during connection (SPP profile), but when I end the socket, the sensor is still connected to my phone (although I have close the connection). Are there any way to make a Bluetooth disconnection? I think there is an intent called ACTION_ACL_CONNECTED, which does that. Can anyone explain me how to use this? Thanks in advance.

  Read the article

• PHP String Encoding Error

  - by Brian

  I'm trying to get the following code to output an IMG tag with the URL for Google Static Maps API http://code.google.com/apis/maps/documentation/staticmaps/#Imagesizes embedded in there... the result is that everything except the $address is being output successfully... what am I doing wrong? function event_map_img($echo = true){ global $post; $address = get_post_meta($post->ID, 'date_address', true); if($echo): echo '<img src="'.'http://maps.google.com/maps/api/staticmap?center='.$address.'&zoom=14&size=700x512&maptype=roadmap&markers=color:blue|label:X|'.$address.'&sensor=false" />'; else: return '<img src="'.'http://maps.google.com/maps/api/staticmap?center='.$address.'&zoom=14&size=700x512&maptype=roadmap&markers=color:blue|label:X|'.$address.'&sensor=false" />'; endif; }

  Read the article

• Get binary data from audio impulses

  - by Timo

  I have IR sensor which have TRS plug and I can record my remotes signals into audio. Now I want to control my computer with TV remote, but I don't have any clue how to compare audio input with pre-recorded audio. But after I realized that these audio waves contains only some kind data (binary) I can turn these into binary or hex, so it is much easier to compare. Waves look just like this: http://i.imgur.com/lCIyl.png And this: ttp://i.imgur.com/goJ6d.png These are records of "OK" button, sometimes there are some impulses on right channel too and I don't know why, it seems like connections in sensor are damaged maybe. Ok thats not matter, anyway I need help with python program which read these impulses and turn these into binary, in realtime from audio input(mic). I know it's sounds like "Do it for me, while I enjoy my life", but I don't have experiences with sound transforming/reading... I've looking for python examples for recording and reading audio, but unsuccessfully.

  Read the article

• how to get the .inf and driver file from a system

  - by Kumar

  How to get the driver and setup info for a phone from a winxp machine which has the config so it can be installed on another xp machine which doesn't ? update - it's htc fuze/tilt and their support site doesn't work

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >