Search Results

Search found 1910 results on 77 pages for 'voice modem'.

Page 6/77 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • how to find 3g modem signal strength with out AT commands?

    - by neckTwi
    when i try to find signal strength of my modem using AT+CSQ, the usb device is locked by the network manager. To find the signal strength with AT+CSQ i have to first disable network connection using #nmcli nm wwan off to unlock the device inode /dev/ttyUSBX. Is there any nmcli option to get signal strength or any other option? EDIT The gdbus object for NetworkManager don't have any method like getSignalStrength. Network manager is locking device file preventing to use AT commands. nm-applet was able to display signal strength in system tray. so there should be a way to get signal strength form network manager! nmcli is command line counter part of nm-applet. Can i get signal strength using nmcli? nothing about signal strength is mentioned in its man pages.

    Read the article

  • Building a Modem Control Software: the connection part.

    - by Yvan JANSSENS
    Hi, I have a 3G modem, and the accompanied "Mobile Partner" software really s*cks, and I want to make my own. Currently, I've found out the following: Sending/Interpreting AT commands Setting the APN/PIN/Network Registration/... These things were well-documented on many sites. But now I want to connect, and here the problems start: If I try to do a ATDT *99#, which should dial the *99# number, I get the message CONNECT. But what do I need to do now? How do I tell windows to use the dial in network? Is the '*99#' even the number I should dial? (I think so, because it's the default dialing number in the Mobile Partner application, and on OS X on my 3G modem) I'm writing this program in C#. Thank you! Yvan

    Read the article

  • Installing a VADTools design component into your 3CX Voice Application Designer toolbox

    - by ParadigmShift
    The 3CX Voice Application Designer is an innovative tool for creating IVR (Interactive Voice Response) Applications, or Voice Applications.  It is a familiar drag-and-drop experience that Visual Studio developers will get the hang of pretty quick. Additionally, there are new 3rd party components released by BlueVoice, that are distributed though www.UtahVoIPStore.com I thought I’d post a quick introduction to it, by showing how to install a component into you designer tool box.  In this example I am using the CommandLine component, which lets you call the command line from your voice application. First, copy the ZIP file that came with your component to the root folder of your VAD project. Now extract the zip file into the root directory. The component will be in the root directory and the Libraries directory will have a new DLL file. Open your VAD project and right-click on the project in project explorer to add the new component to your project. Navigate to the root folder of your project and select the new component. The component is now ready for you to use in your toolbox.

    Read the article

  • How do I activate my gizmo5 phone number in Google Voice? [closed]

    - by Sorin Sbarnea
    I wasn't able to activate my gizmo5 number because Google Voice activation(verification) requires you to enter two dial tones (DTMF) and they did not work at least not with these two variants: Using gizmo5 PC client using fring from Iphone as gizmo5 SIP client Redirecting gizmo5 to a US mobile number None of the above methods worked for me. Any ideas? More info: http://www.google.com/support/forum/p/voice/thread?tid=1d8c1d99721e3509&hl=en http://googlevoices.blogspot.com/2009/04/forwarding-sip-calls-to-google-voice.html

    Read the article

  • iPhone App › Add voice recognition?

    - by aaron
    I'd like to build an app that uses voice recognition. I've seen big companies like Google etc implement this feature, but I'm curious about doing it on a start-up level. Anyone looked into this? Are there any tools out there for us to do this?

    Read the article

  • how would it be possible to discover a cable modem's MAC remotely?

    - by amateurenthusiast
    i was reading the back archives of a canadian privacy law blog, and he linked to a judicial decision. apparently as part of an investigation in which were used yahoo chat and google's old 'hello' image trading program the officer was able to determine a suspect's modem's MAC address: In order to determine who STEPHTOSH was, the officer did a trace on a programme called WHO IS in an effort to learn from where STEPHTOSH was coming. WHO IS is a command program available to the public. The officer was able to ascertain that the person using the name STEPHTOSH was a Rogers Internet customer. The officer was able to obtain the Internet Protocol address, also known as the I.P. There is only one location for an I.P., which is unique to that subscriber. By use of the website known as DNS STUFF.com, one is able to find with which company this I.P. is registered. It was ascertained that the I.P. address used by STEPHTOSH was registered to Rogers Cable, from the Toronto area. The officer also learned the Cable Modem MAC address used by STEPHTOSH. This was all the information the officer was able to amass. now it was my understanding that the MAC address of any given device can only be accessed if you're only one 'hop' away on the Internet. the suspect in question was in Markham and the officer part of the Toronto Police, so it's conceivable that they both might have used Rogers internet. but would that still put them only one 'hop' away from each other? i thought the first hop after the modem was usually the ISP? and if he'd used a netBIOS query against this guy's machine it would return the ethernet card's MAC, not the modem's. so is this guy on the same rogers subnet as the suspect's cable modem, is that functionality part of google's Hello (i could only think that it would be possible if Hello operated as a virtual LAN or something), does the officer have remote access to the arp caches of the routers at Rogers or is he just full of crap and lying to make his case stronger?

    Read the article

  • Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

    - by Abner
    Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

    Read the article

  • Can i connect my modem's ethernet and usb slot to two computers simultaneously??

    - by Rajasekar
    I have NETGEAR BROADBAND MODEM. I had a desktop and laptop. I had connected internet to dekstop by using Ehternet slot on my modem to my ethernet slot on my Desktop. I need internet connection on my Laptop too. There is another slot in modem which can be connect using USB cable. Whether i can connect the laptop with that USB slot in my modem and use both the computer's internet? whether it will work??

    Read the article

  • Is a "Soft Modem" (i.e. internal) really going to cause incompatibilities?

    - by Farseeker
    Thanks to the fact that our banking industry in Australia... outdated (which is the politest word I could think of when describing the banking industry)... to do a certain kind of transaction our bank requires us to use a dialup modem and send serial data to them. When reading through their documentation (last update: 1995), they state that any "Soft Modems" (by which I assume they mean internal modems, as they refer to a AMR socket on a motherboard, which I haven't seen in donkeys years) should not be used because of "possible incompatibilities" Seeing as buying an external, serial-port modem is actually quite expensive these days and I have a whole box of PCI modems taken out of a bunch of Dells I really don't want to have to buy an external modem. Additionally I think their documentation is simply outdated. Has anyone had experience with internal modems causing issues, where an external modem didn't?

    Read the article

  • Removing surrounding noises from voice recording

    - by Peak Reconstruction Wavelength
    I have a wave file whose frequency spectrum looks like this. http://i.stack.imgur.com/2rRaS.png It contains audio, which I want to keep while removing the rest. The problem is that the surround noise changes, just those distinct voice patterns remain. I marked the voice patterns for clarity: http://i.stack.imgur.com/eLkBl.png What could an algorithm look like / a workflow in adobe audition look like that removes everything but the voice patterns? I think that the main characteristic is the line-shaped form over time. Loudness alone is not enough as the noise is loud aswell.

    Read the article

  • I need to consume an ocx for voice recording and playblack

    - by reinaldo Crespo
    Hi. The current ocx controls I'm using for voice recording and playback are not compatible with Windows 7. I'm already feeling the pressure to produce a Windows 7 compatible version of my software. The author has already stated that he is not planning to write a Windows 7 compatible ocx. I work from xharbour so I need to consume an OCX or write the whole thing (which I'd like to avoid and don't even know where to start). My basic needs are (1) to record dictation from the microphone with methods to pause and vox preferably, (2) save to file, (3) and later playback with methods to ff and rew. Thank you, Reinaldo.

    Read the article

  • Send arbitrary commands to modem for info

    - by mydoghasworms
    I have a USB 3G data card and modem. According to the supplier, to check the data balance on the account, I must dial a number like *89# (or whatever) from the handset. The device appears as a ppp0 interface in my network devices. How does one go about issuing commands to the modem to send the commands and receive back the information? UPDATE: OK, I found some help here: http://www.linuxquestions.org/questions/linux-hardware-18/sending-at-commands-to-a-sms-modem-372445/, but firstly, there are 3 ttyUSB devices on my system, and I assume that one of them is the 3G modem, but how can I tell? Secondly, trying to echo something to two of them says that the device is busy, which stands to reason, because I am using it to connect to the internet. Some help, please?

    Read the article

  • Opening and Testing Ports on Modem > Router Connection

    - by JakeTheSnake
    Working off of my last question, I can access my server's FTP over the LAN but not over the internet. I'm using Filezilla on port 666. My router/modem configuration is as such (similar to other post): 1) Modem connects to WAN 2) WAN port on modem connects to LAN port on Router 3) Modem internal IP address is 192.168.0.254 4) Router internal IP address is 192.168.0.1 5) Modem has DHCP turned OFF 6) Router has DHCP turned ON 7) Router is running Tomato firmware and it's set as 'Router' (not 'Gateway') 8) The internet is working (just had to say that) I've set up port forwarding both on the modem and router - both route port 666 to the IP address of 192.168.0.3 (TCP); that is the IP address of the server which has FileZilla running. I don't know if that's hindering anything but I've also tried it with just the modem and just the router...same result. I've also tried setting the server to be DMZ (both on router and modem). Neither router nor modem have anything in their logs about denying inbound traffic on port 666 so my ability to troubleshoot stops there. I've tried contacting my ISP (Telus, running on mobility plan...it's a "Smart" Hub) but they weren't much help. They said they only block port 25 and 80 and maybe a few others, but not most ports. I test whether or not the port is open by going to canyouseeme.org - I don't know whether or not that would produce a 'connection refused' result just based on the fact that the FTP requires a login...I'm not well versed on this matter. FWIW, sometimes I get a 'connection refused' error on canyouseeme.org but mostly it's 'connection timed out'. I don't know what else to do at this point.

    Read the article

  • Does Huawei E398 LTE Modem works with Netgear Router?

    - by Paul Smith
    I've been using a Netgear router sharing the signal through my Huawei E160 dongle, but following the speeds update and the device limit, it does not satisfy the demand. Through research, I've found that Huawei E398 is the latest and functional dongle so far. I'm going to update, but the confusion comes: Is it compatible for my Netgear router? Will it work? Any information will be appreciated. I found the unlocked E398 here.

    Read the article

  • Why wont Ubuntu recognize Rogers LTE Rocket stick 330U Sierra wireless modem?

    - by rob lawson
    I tried to plug the rocket stick into the USB slot, and Ubuntu does not recognize that there is anything in the drive. I plug in a standard USB thumbdrive and it is recognized right away. Are there any applications to help me open the rogers folders to see the files, and maybe connect to the Internet using said rocket stick 330U? I've been searching for this answer for almost a week now, seems no one knows how to get the net using this piece of technology.

    Read the article

  • How to get Bus and Device relationship for a /dev/ttyUSB

    - by Ernesto Campohermoso
    I need to write an script for restart USB dongles. I have all tools but I can't link my /dev/ttyUSBx to physical BUS and DEVICE. An issue is that I have three dongles with the same id vendor and id product. If I do lsusb the output is: Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 006: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 002: ID 80ee:0021 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub And I have attached it to: /dev/ttyUSB0 /dev/ttyUSB3 /dev/ttyUSB5 But I want to know which device is related with which Bus Device. By example I need to get the following: /dev/ttyUSB0 -> Bus 001 Device 006 /dev/ttyUSB3 -> Bus 001 Device 004 /dev/ttyUSB5 -> Bus 001 Device 007 I'm using Ubuntu Server 10.04 and I tested the tools: lsusb hal lsmod But I can't get the relationship.

    Read the article

  • Is it possible to get a google voice number without already having a phone number?

    - by boost
    I'm sorry if this is the wrong place to post this, but I couldn't find a more suitable website in the stackexchange network. I currently have no phone number; I can make outgoing calls via the widget in gmail, but I cannot receive calls (as far as I know). I know that you can set up a google voice number to forward to google chat, and this is exactly what I want. The problem is, I can't get a google voice number in the first place, because it first requires that I have an existing phone number, even if I wouldn't use it. So, it is possible to skip providing an existing phone number, and just get a google voice number that forwards to google chat? Alternatively, is there any free phone service that can be used without a phone and lets you receive calls from any number? I realize I'm kind of asking for free candy, but, if it's out there, I'd be a fool

    Read the article

  • TP-LINK-8901 modem does not connect automatically; only works in bridged mode [closed]

    - by Arash
    Possible Duplicate: Cannot Connect To Internet In Automatic (pppoe) Mode Of Modem My TP-LINK-8901 modem does not connect to internet with "always on" (automatic) connection. I have to put it in bridge mode and make a connection in Windows to connect to internet. Also, there is no configuration problem. What I did: Reset modem Update firmware Is there any way to solve the problem myself, e.g. through hardware or software? I can't have it repaired because the warranty already expired.

    Read the article

  • How to configure TATA Photon+ EC1261 HUAWEI

    - by user3215
    I'm running ubuntu 10.04. I have a newly purchased TATA Photon+ Internet connection which supports Windows and Mac. On the Internet I found a article saying that it could be configured on Linux. I followed the steps to install it on Ubuntu from this link. I am still not able to get online, and need some help. Also, it is very slow, but I was told that I would see speeds up to 3.1MB. I dont have wvdial installed and cannot install it from apt as I'm not connected to internet Booting from windows I dowloaded "wvdial" .deb package and tried to install on ubuntu but it's ended with dependency problem. Automatically, don't know how, I got connected to internet only for once. Immediately I installed wvdial package after this I followed the tutorials(I could not browse and upload the files here) . From then it's showing that the device is connected in the network connections but no internet connection. Once I disable the device, it won't show as connected again and I'll have to restart my system. Sometimes the device itself not detected(wondering if there is any command to re-read the all devices). output of wvdialconf /etc/wvdial.cof: #wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB2. Modem configuration written to /etc/wvdial.conf. ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" output of wvdial: #wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CRM=1 AT+CRM=1 OK --> Modem initialized. --> Sending: ATDT#777 --> Waiting for carrier. ATDT#777 CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Sat Oct 16 15:30:47 2010 --> Pid of pppd: 5681 --> Using interface ppp0 --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> pppd: (u;[08]@s;[08]`{;[08] --> local IP address 14.96.147.104 --> pppd: (u;[08]@s;[08]`{;[08] --> remote IP address 172.29.161.223 --> pppd: (u;[08]@s;[08]`{;[08] --> primary DNS address 121.40.152.90 --> pppd: (u;[08]@s;[08]`{;[08] --> secondary DNS address 121.40.152.100 --> pppd: (u;[08]@s;[08]`{;[08] Output of log message /var/log/messages: Oct 16 15:29:44 avyakta-desktop pppd[5119]: secondary DNS address 121.242.190.180 Oct 16 15:29:58 desktop pppd[5119]: Terminating on signal 15 Oct 16 15:29:58 desktop pppd[5119]: Connect time 0.3 minutes. Oct 16 15:29:58 desktop pppd[5119]: Sent 0 bytes, received 177 bytes. Oct 16 15:29:58 desktop pppd[5119]: Connection terminated. Oct 16 15:30:47 desktop pppd[5681]: pppd 2.4.5 started by root, uid 0 Oct 16 15:30:47 desktop pppd[5681]: Using interface ppp0 Oct 16 15:30:47 desktop pppd[5681]: Connect: ppp0 <--> /dev/ttyUSB2 Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:47 desktop pppd[5681]: CHAP authentication succeeded Oct 16 15:30:48 desktop pppd[5681]: local IP address 14.96.147.104 Oct 16 15:30:48 desktop pppd[5681]: remote IP address 172.29.161.223 Oct 16 15:30:48 desktop pppd[5681]: primary DNS address 121.40.152.90 Oct 16 15:30:48 desktop pppd[5681]: secondary DNS address 121.40.152.100 EDIT 1 : I tried the following sudo stop network-manager sudo killall modem-manager sudo /usr/sbin/modem-manager --debug > ~/mm.log 2>&1 & sudo /usr/sbin/NetworkManager --no-daemon > ~/nm.log 2>&1 & Output of mm.log: #vim ~/mm.log: ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Option ** Message: Loaded plugin Huawei ** Message: Loaded plugin Longcheer ** Message: Loaded plugin AnyData ** Message: Loaded plugin ZTE ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Sierra ** Message: Loaded plugin Generic ** Message: Loaded plugin Gobi ** Message: Loaded plugin Novatel ** Message: Loaded plugin Nokia ** Message: Loaded plugin MotoC Output of nm.log: #vim ~/nm.log: NetworkManager: <info> starting... NetworkManager: <info> modem-manager is now available NetworkManager: SCPlugin-Ifupdown: init! NetworkManager: SCPlugin-Ifupdown: update_system_hostname NetworkManager: SCPluginIfupdown: guessed connection type (eth0) = 802-3-ethernet NetworkManager: SCPlugin-Ifupdown: update_connection_setting_from_if_block: name:eth0, type:802-3-ethernet, id:Ifupdown (eth0), uuid: 681b428f-beaf-8932-dce4-678ed5bae28e NetworkManager: SCPlugin-Ifupdown: addresses count: 1 NetworkManager: SCPlugin-Ifupdown: No dns-nameserver configured in /etc/network/interfaces NetworkManager: nm-ifupdown-connection.c.119 - invalid connection read from /etc/network/interfaces: (1) addresses NetworkManager: SCPluginIfupdown: management mode: unmanaged NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1) NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:14.4/0000:02:02.0/net/eth1, iface: eth1): no ifupdown configuration found. NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) @

    Read the article

  • Online voice chat: Why client-server model vs. peer-to-peer model?

    - by sstallings
    I am adding online voice chat to a Silverlight app. I've been reviewing current apps, services and SDKs found thru online searches and forums. I'm finding that the majority of these implement a client-server (C/S) model and I'm trying to understand why that model versus a peer-to-peer (PTP) model. To me PTP would be preferable because going direct between peers would be more efficient (fewer IP hops and no processing along the way by a server computer) and no need for a server and its costs and dependencies. I found some products offer the ability to switch from PTP to C/S if the PTP proves insufficient. As I thought more about it, I could see that C/S could be better if there are more than two peers involved in a conversation, then the server (supposedly with more bandwidth) could do a better job of relaying each peers outgoing traffic to the multiple other peers. In C/S many-to-many voice chatting, each peer's upstream broadband (which is where the bottleneck inherently is) would only have to carry each item of voice traffic once, then the server would use its superior bandwidth to relay the message to the multiple other peers. But, in a situation with one-on-one voice chatting it seems that PTP would be best. A server would not reduce each of the two peer's bandwidth requirements and would only add unnecessary overhead, dependency and cost. In one-on-one voice chatting: Am I mistaken on anything above? Would peer-to-peer be best? Would a server provide anything of value that could not be provided by a client-only program? Is there anything else that I should be taking into consideration? And lastly, can you recommend any Silverlight PTP or C/S voice chat products? Thanks in advance for any info.

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >