left join - Page 624 - Developer IT

Reconnect to GPRS from J2ME

- by ouzz

Dear All, I have a little problem. I have developed a midlet application that call some webservices through internet. I'm using cell phones with GPRS connection. For some time it runs as I wanted, run the apps, call the webservices through the GPRS, it returns the result, call the webservices again, and so on. But say, I call the webservices and after the apps return the result I needed, I left it for a while. The next time I continue to access the webservices, the apps takes a while to connect through the GPRS. In nokia, it is marked with a G in a box. In SE it is marked with a glowing globe. This 'G' in the box or the glowing globe will appear after a while or won't appear at all, but the apps is still trying to connect to the internet. Does it come from my apps or it come from the cell phone? And could I know [or the apps knows] that at the moment the apps tries to connect the GPRS is ready? Thanks a lot for your responses...

Read the article

Athentication Problem - not recognizing 'else' - Ruby on rails...

- by bgadoci

I can't seem to figure out what I am doing wrong here. I have implemented the Super Simple Authentication from Ryan Bates tutorial and while the login portion is functioning correctly, I can't get an error message and redirect to happen correctly for a bad login. Ryan Bates admits in his comments he left this out but can't seem to implement his recommendation. Basically what is happening is that when someone logs in correctly it works. When a bad password is entered it does the same redirect and flashes 'successfully logged in' thought they are not. The admin links do not show (which is correct and are the links protected by the <% if admin? %) but I need it to say 'failed login' and redirect to login path. Here is my code: SessionsController class SessionsController < ApplicationController def create if session[:password] = params[:password] flash[:notice] = 'Successfully logged in' redirect_to posts_path else flash[:notice] = "whoops" redirect_to login_path end end def destroy reset_session flash[:notice] = 'Successfully logged out' redirect_to posts_path end end ApplicationController class ApplicationController < ActionController::Base helper_method :admin? protected def authorize unless admin? flash[:error] = "unauthorized request" redirect_to posts_path false end end def admin? session[:password] == "string0826" end helper :all # include all helpers, all the time protect_from_forgery # See ActionController::RequestForgeryProtection for details # end

Read the article

Show NotifyIcon Context Menu and Control Its Position?

- by Shawn O'Hern

I'm trying to show a context menu when I left-click a NotifyIcon. Just calling NotifyIcon.ContextMenuStrip.Show() doesn't work very well. A solution has been posted here before that calls a secret method using Reflection: Dim mi As System.Reflection.MethodInfo = GetType(NotifyIcon).GetMethod("ShowContextMenu", Reflection.BindingFlags.Instance Or Reflection.BindingFlags.NonPublic) mi.Invoke(Icon, Nothing) This works great, except that I also need to control where the menu is shown. I want to wait for the SystemInformation.DoubleClickTime to elapse between receiving the NotifyIcon.MouseUp event and displaying the menu, so that I can handle single-clicks and double-clicks separately. But invoking the ShowContextMenu method displays the menu at the current mouse position when ShowContextMenu is called, not when the icon was actually clicked. Which means that if the mouse moved during the DoubleClickTime, the menu will be displayed in a different part of the screen. So if I can control where the menu is shown, I can just save the mouse coordinates when I receive the MouseUp event, and then I can ensure that the menu is displayed near the icon. Is there a way to do this? Thanks in advance.

Read the article

Lazarus - why I can't assign event to run-time component?

- by Garret Raziel

Hello, I have this Lazarus program: unit Unit2; {$mode objfpc}{$H+} interface uses Classes, SysUtils, FileUtil, LResources, Forms, Controls, Graphics, Dialogs, StdCtrls, ComCtrls; type { TForm2 } TForm2 = class(TForm) procedure OnTlacitkoClick(Sender: TObject); procedure FormClose(Sender: TObject; var CloseAction: TCloseAction); procedure FormCreate(Sender: TObject); tlac:TButton; private { private declarations } public { public declarations } end; var Form2: TForm2; implementation { TForm2 } procedure TForm2.OnTlacitkoClick(Sender: TObject); begin showmessage('helloworld'); end; procedure TForm2.FormCreate(Sender: TObject); var i,j:integer; begin tlac:=TButton.Create(Form2); tlac.OnClick:=OnTlacitkoClick; tlac.Parent:=Form2; tlac.Left:=100; tlac.Top:=100; end; initialization {$I unit2.lrs} end. but compiler says: unit2.pas(63,32) Error: Wrong number of parameters specified for call to "OnTlacitkoClick" in tlac.OnClick:=OnTlacitkoClick; expression. I have searched and think that this is legal expression in Delphi. I want simply to registrate OnTlacitkoClick as tlac.OnClick event,not to call this procedure. Is there somethink wrong with the code or must I do it different in Lazarus/Freepascal? Thanks.

Read the article

Seperation of game- and rendering logic

- by Qua

What is the best way to seperate rendering code from the actually game engine/logic code? And is it even a good idea to seperate those? Let's assume we have a game object called Knight. The Knight has to be rendered on the screen for the user to see. We're now left with two choices. Either we give the Knight a Render/Draw method that we can call, or we create a renderer class that takes care of rendering all knights. In the scenario where the two is seperated the Knight should the knight still contain all the information needed to render him, or should this be seperated as well? In the last project we created we decided to let all the information required to render an object be stored inside the object itself, but we had a seperate component to actually read those informations and render the objects. The object would contain information such as size, rotation, scale, and which animation was currently playing and based on this the renderer object would compose the screen. Frameworks such as XNA seem to think joining the object and rendering is a good idea, but we're afraid to get tied up to a specific rendering framework, whereas building a seperate rendering component gives us more freedom to change framework at any given time.

Read the article

Hibernate : Opinions in Composite PK vs Surrogate PK

- by Albert Kam

As i understand it, whenever i use @Id and @GeneratedValue on a Long field inside JPA/Hibernate entity, i'm actually using a surrogate key, and i think this is a very nice way to define a primary key considering my not-so-good experiences in using composite primary keys, where : there are more than 1 business-value-columns combination that become a unique PK the composite pk values get duplicated across the table details cannot change the business value inside that composite PK I know hibernate can support both types of PK, but im left wondering by my previous chats with experienced colleagues where they said that composite PK is easier to deal with when doing complex SQL queries and stored procedure processes. They went on saying that when using surrogate keys will complicate things when doing joining and there are several condition when it's impossible to do some stuffs when using surrogate keys. Although im sorry i cant explain the detail here since i was not clear enough when they explain it. Maybe i'll put more details next time. Im currently trying to do a project, and want to try out surrogate keys, since it's not getting duplicated across tables, and we can change the business-column values. And when the need for some business value combination uniqueness, i can use something like : @Table(name="MY_TABLE", uniqueConstraints={ @UniqueConstraint(columnNames={"FIRST_NAME", "LAST_NAME"}) // name + lastName combination must be unique But im still in doubt because of the previous discussion about the composite key. Could you share your experiences in this matter ? Thank you !

Read the article

Scrolling down to next element via keypress & scrollTo plugin - jQuery

- by lyrae

I am using jQuery's scrollTo plugin to scroll up and down my page, using UP arrow and DOWN arrow. i have a bunch of div with class "screen", as so: <div class="screen-wrapper">...</div> What I am trying to do is, when i press UP or DOWN, the window scrolls to the next, or previous div with class of "screen". I have the keypresses taken care of. According to the plugin docs, to scroll a window, you use $.scrollTo(...); Here's the code I have: $(document).keypress(function(e){ switch (e.keyCode) { case 40: // down n = $('.screen-wrapper').next() $.scrollTo( n, 800 ); break; case 38: // up break; case 37: // left break; case 39: // right break; } }); And if it helps, here's the HTML div. I have a few of these on the page, and essentially, am trying to scroll to next one by pressing down arrow: <div class='screen-wrapper'> <div class='screen'> <div class="sections"> <ul> <li><img src="images/portfolio/sushii-1.png " /></li> <li><img src="images/portfolio/sushii-2.png" /></li> <li><img src="images/portfolio/sushii-3.png" /></li> </ul> </div> <div class="next"></div> <div class="prev"></div> </div> And also if it needed, I can provide a link where this is being used if it'll help someone get a better idea. edit And, i forgot to mention what the real question here is. The question/problem is that it won't scroll down past the first element, as seth mentioned.

Read the article

Simulate Hover using jQuery

- by Riccardo

Given the existing "buttons" HTML: <div id="MB"> <ul class="list"> <li id="post-5"><a href="#post-5">5</a></li> <li id="post-4"><a href="#post-4">4</a></li> <li id="post-3"><a href="#post-3">3</a></li> <li id="post-2"><a href="#post-2">2</a></li> <li id="post-1"><a href="#post-1">1</a></li> </ul> </div> CSS: #MB .list li a { float:left; color:#333; background:#f6f6f6; border:1px solid #eaeaea; border-right:none; padding:0 8px; } #MB .list li a:hover, #MB .list li a:focus { color:#fff; border:1px solid #333333; border-right:none; background:#404040; text-decoration:none; } I'd like to simulate "hover" automatically on each button, sequentially, every n seconds. This means that every n seconds a button is "hovered" (changing color etc), at next interval is "turned off" and the following button will "turn on" and so on...

Read the article

Linq2sql code generator misbehaving

- by Martin

Sometime the linq2sql just makes its mind up about things. I've been pulling my hair for the past hours trying to work out what I'm doing differently from all the other times when I don't get ForeignKeyReferenceAlreadyHasValueException. Turns out that if (this._Activity.HasLoadedOrAssignedValue) { throw new System.Data.Linq.ForeignKeyReferenceAlreadyHasValueException(); } is present on my primary key in this particular table, and in no other. No matter what I do with the association, I've even tried deleting and dragging the thing back to the designer, it's still there and I'm sure it's not supposed to be. I know why, of course, but I don't know why, so to speak. A while back the association went the other way. Whereas I've left that era behind me, the code generator seems to exhibit phantom pains. The same phenomenon, is responsible for me having to change the namespace in the designer.cs everytime I make changes in the designer. I made the mistake of renaming my namespace and the code generator just doesn't get it. Somebody please help this poor boy out.

Read the article

Resize a UITableView to accomodate a translucent header before it becomes visible

- by scotru

I have a UITableView inside a UINavigationController. The navigation controller uses a translucent navigation bar--as a result, my table view is displayed behind the navigation bar and it's height includes the height of the navigation bar. However, I want the table view to appear below the navigation bar (as it would if it were not translucent). I'm working in MonoTouch, but I think the principles are language independent. Here's the code I'm using to resize the UITableView frame: RectangleF rect = tableView.Frame; tableView.Frame = new RectangleF (rect.Left, rect.Top + 44, rect.Width, rect.Height - 44); tableView.ContentInset = new UIEdgeInsets (0, 0, 0, 0); This works fine if I place it in the viewDidAppear method, but will not work in the viewWillAppear method. In the viewDidAppear method, however I can see the resize occurring briefly in the form of a flicker. I want to do the resize before the frame appears. But if I put this code in viewWillAppear or viewDidLoad, it has no effect. Thanks in advance for any help!

Read the article

Ruby: add custom properties to built-in classes

- by dreftymac

Question: Using Ruby it is simple to add custom methods to existing classes, but how do you add custom properties? Here is an example of what I am trying to do: myarray = Array.new(); myarray.concat([1,2,3]); myarray._meta_ = Hash.new(); # obviously, this wont work myarray._meta_['createdby'] = 'dreftymac'; myarray._meta_['lastupdate'] = '1993-12-12'; ## desired result puts myarray._meta_['createdby']; #=> 'dreftymac' puts myarray.inspect() #=> [1,2,3] The goal is to construct the class definition in such a way that the stuff that does not work in the example above will work as expected. Update: (clarify question) One aspect that was left out of the original question: it is also a goal to add "default values" that would ordinarily be set-up in the initialize method of the class. Update: (why do this) Normally, it is very simple to just create a custom class that inherits from Array (or whatever built-in class you want to emulate). This question derives from some "testing-only" code and is not an attempt to ignore this generally acceptable approach.

Read the article

Ruby: add custom properties to built-in classes

- by dreftymac

Question: Using Ruby it is simple to add custom methods to existing classes, but how do you add custom properties? Here is an example of what I am trying to do: myarray = Array.new(); myarray.concat([1,2,3]); myarray._meta_ = Hash.new(); # obviously, this wont work myarray._meta_['createdby'] = 'dreftymac'; myarray._meta_['lastupdate'] = '1993-12-12'; ## desired result puts myarray._meta_['createdby']; #=> 'dreftymac' puts myarray.inspect() #=> [1,2,3] The goal is to construct the class definition in such a way that the stuff that does not work in the example above will work as expected. Update: (clarify question) One aspect that was left out of the original question: it is also a goal to add "default values" that would ordinarily be set-up in the initialize method of the class. Update: (why do this) Normally, it is very simple to just create a custom class that inherits from Array (or whatever built-in class you want to emulate). This question derives from some "testing-only" code and is not an attempt to ignore this generally acceptable approach.

Read the article

In ParallelPython, a method of an object ( object.func() ) fails to manipulate a variable of an object ( object.value )

- by mehmet.ali.anil

With parallelpython, I am trying to convert my old serial code to parallel, which heavily relies on objects that have methods that change that object's variables. A stripped example in which I omit the syntax in favor of simplicity: class Network: self.adjacency_matrix = [ ... ] self.state = [ ... ] self.equilibria = [ ... ] ... def populate_equilibria(self): # this function takes every possible value that self.state can be in # runs the boolean dynamical system # and writes an integer within self.equilibria for each self.state # doesn't return anything I call this method as: Code: j1 = jobserver.submit(net2.populate_equilibria,(),(),("numpy as num")) The job is sumbitted, and I know that a long computation takes place, so I speculate that my code is ran. The problem is, i am new to parallelpython , I was expecting that, when the method is called, the variable net2.equilibria would be written accordingly, and I would get a revised object (net2) . That is how my code works, independent objects with methods that act upon the object's variables. Rather, though the computation is apparent, and reasonably timed, the variable net2.equilibria remains unchanged. As if PP only takes the function and the object, computes it elsewhere, but never returns the object, so I am left with the old one. What do I miss? Thanks in advance.

Read the article

AStar in a specific case in C#

- by KiTe

Hello. To an intership, I have use the A* algorithm in the following case : the unit shape is a square of height and width of 1, we can travel from a zone represented by a rectangle from another, but we can't travel outside these predifined areas, we can go from a rectangle to another through a door, represented by a segment on corresponding square edge. Here are the 2 things I already did but which didn't satisfied my boss : 1 : I created the following classes : -a Door class which contains the location of the 2 separated squares and the door's orientation (top, left, bottom, right), -a Map class which contains a door list, a rectangle list representing the walkable areas and a 2D array representing the ground's squares (for additionnal infomations through an enumeration) - classes for the A* algorithm (node, AStar) 2 : -a MapCase class, which contains information about the case effect and doors through an enumeration (with [FLAGS] attribute set on, to be able to cummulate several information on each case) -a Map classes which only contains a 2D array of MapCase classes - the classes for the A* algorithm (still node an AStar). Since the 2 version is better than the first (less useless calculation, better map classes architecture), my boss is not still satisfied about my mapping classes architecture. The A* and node classes are good and easily mainainable, so I don't think I have to explain them deeper for now. So here is my asking : has somebody a good idea to implement the A* with the problem specification (rectangle walkable but with a square unit area, travelling through doors)? He said that a grid vision of the problem (so a 2D array) shouldn't be the correct way to solve the problem. I wish I've been clear while exposing my problem .. Thanks KiTe

Read the article

Font not showing bullet points

- by Hanpan

I have embedded my font using the embed meta tag, along which the entire range of Unicode characters... here is my CustomTextField class: [Embed(source='../assets/fonts/Arial.ttf',fontName='CustomFont',fontWeight='regular', unicodeRange='U+0020-U+0040,U+0041-U+005A,U+005B-U+0060,U+0061-U+007A,U+007B-U+007E,U+0080-U+00FF,U+0100-U+017F,U+0400-U+04FF,U+0370-U+03FF,U+1E00-U+1EFF', mimeType='application/x-font-truetype' )] public static var MY_FONT:Class; [Embed(source='../assets/fonts/Arial Bold.ttf',fontName='CustomFont',fontWeight='bold', unicodeRange='U+0020-U+0040,U+0041-U+005A,U+005B-U+0060,U+0061-U+007A,U+007B-U+007E,U+0080-U+00FF,U+0100-U+017F,U+0400-U+04FF,U+0370-U+03FF,U+1E00-U+1EFF', mimeType='application/x-font-truetype' )] public static var MY_FONT_BOLD:Class; public static const DEFAULT_FONT:String = "CustomFont"; public static const DEFAULT_TEXT_COLOUR:int = 0x000000; public static const DEFAULT_TEXT_SIZE:int = 14; private var _tf:TextFormat = new TextFormat(DEFAULT_FONT, DEFAULT_TEXT_SIZE, DEFAULT_TEXT_COLOUR); public function CustomTextField():void { Font.registerFont(CustomTextField.MY_FONT); Font.registerFont(CustomTextField.MY_FONT_BOLD); _tf.size = 16; antiAliasType = AntiAliasType.ADVANCED; sharpness = 0; defaultTextFormat = _tf; autoSize = TextFieldAutoSize.LEFT; embedFonts = true; } public override function set htmlText(value:String):void { super.htmlText = value; setTextFormat(_tf); } For some reason, using tags intends the text perfectly, but I am not seeing any bullet points. The font is just standard Arial, so it isn't a case of the font missing the bullet character. Does anyone have any idea as to why Flex is not showing the bullet point characters?

Read the article

GRAPH PROBLEM: find an algorithm to determine the shortest path from one point to another in a recta

- by newba

I'm getting such an headache trying to elaborate an appropriate algorithm to go from a START position to a EXIT position in a maze. For what is worth, the maze is rectangular, maxsize 500x500 and, in theory, is resolvable by DFS with some branch and bound techniques ... 10 3 4 7 6 3 3 1 2 2 1 0 2 2 2 4 2 2 5 2 2 1 3 0 2 2 2 2 1 3 3 4 2 3 4 4 3 1 1 3 1 2 2 4 2 2 1 Output: 5 1 4 2 Explanation: Our agent looses energy every time he gives a step and he can only move UP, DOWN, LEFT and RIGHT. Also, if the agent arrives with a remaining energy of zero or less, he dies, so we print something like "Impossible". So, in the input 10 is the initial agent's energy, 3 4 is the START position (i.e. column 3, line 4) and we have a maze 7x6. Think this as a kind of labyrinth, in which I want to find the exit that gives the agent a better remaining energy (shortest path). In case there are paths which lead to the same remaining energy, we choose the one which has the small number of steps, of course. I need to know if a DFS to a maze 500x500 in the worst case is feasible with these limitations and how to do it, storing the remaining energy in each step and the number of steps taken so far. The output means the agent arrived with remaining energy= 5 to the exit pos 1 4 in 2 steps. If we look carefully, in this maze it's also possible to exit at pos 3 1 (column 3, row 1) with the same energy but with 3 steps, so we choose the better one. With these in mind, can someone help me some code or pseudo-code? I have troubles working this around with a 2D array and how to store the remaining energy, the path (or number of steps taken)....

Read the article

Changing Positions of the Chart When Creating Multiple Charts Automatically via Vbasic in Excel 2007

- by McVey

I am creating a new chart for each row of data in an Excel spreadsheet. I have the Vbasic working properly, but I want to change the position of the chart on the sheet that is added for each row. Below is my code, what do I need to do to change the position of the chart on the page automatically? Ideally, I would like it to be in the upper left hand corner of each sheet. Sub DrawCharts() Dim Ws As Worksheet Dim NewWs As Worksheet Dim cht As Chart Dim LastRow As Long Dim CurrRow As Long Set Ws = ThisWorkbook.Worksheets("Sheet1") LastRow = Ws.Range("A65536").End(xlUp).Row For CurrRow = 2 To LastRow Set NewWs = ThisWorkbook.Worksheets.Add NewWs.Name = Ws.Range("A" & CurrRow).Value Set cht = ThisWorkbook.Charts.Add With cht .ChartType = xl3DColumnClustered .SeriesCollection.NewSeries .SeriesCollection(1).Values = "=" & Ws.Name & "!R" & CurrRow & "C3:R" & CurrRow & "C8" .SeriesCollection(1).Name = "=" & Ws.Name & "!R" & CurrRow & "C2" .SeriesCollection(1).XValues = "Sheet1!R1C3:R1C8" .Axes(xlValue).MinimumScale = 0 .Axes(xlValue).MaximumScale = 1 .Axes(xlValue).MajorUnit = 0.2 .SetElement (msoElementDataLabelShow) .SetElement (msoElementLegendNone) .Location Where:=xlLocationAsObject, Name:=NewWs.Name End With Next CurrRow End Sub Any help is appreciated.

Read the article

why can't asp.net find my textbox?

- by phunehehe

Hello, I'm trying to add more fields to the CreateUserWizardStep, here is what I added: <asp:CreateUserWizardStep ID="CreateUserWizardStep1" runat="server"> <ContentTemplate> <table border="0"> <tr> <td align="right"> <asp:Label ID="NickNameLabel" runat="server" AssociatedControlID="NickName">Nick Name:</asp:Label> </td> <td> <asp:TextBox ID="NickName" runat="server"></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="NickName" ErrorMessage="Nick Name is required." ToolTip="Nick Name is required." ValidationGroup="CreateUserWizard1">*</asp:RequiredFieldValidator> </td> </tr> <%-- The default code is left unchanged, but not shown here --%> </table> </ContentTemplate> </asp:CreateUserWizardStep> Then I tried to reference the objects like this protected void NewUserWizard_CreatedUser(object sender, EventArgs e) { CreateUserWizardStep step = NewUserWizard.FindControl("CreateUserWizardStep1") as CreateUserWizardStep; TextBox nickName= step.FindControl("NickName") as TextBox; // insert additional information to the database } The problem is, I'm getting nulls for nickName. Am I using FindControl("") incorrectly?

Read the article

Setting Parameters from another Parameter In SSRS

- by Mike

I was able to get this working is SSRS 2008, but do to the fact that my company only has 2005 servers I need to downgrade the report to 2005. The idea is for a given person name there are two key fields EntityType and EntityId So I have a parameter from a dataset where the Label is the Name and the value is EntityType_EntityId I use the split function to take the left and right sides of from _ In 2008, I set the query parameters of the dataset to the split function and it works In 2005, I set the Default Value of each Report Parameters Now when I run the report and put textboxes showing the value of the parameters, the values are shown correctly but the query does not run. I am guessing that this is a lifecycle issue being Get Name Parameter Run Report THEN Set Parameters = Split of Name But the problem with that is the second time I run the report I should get result and I do not. Does anyone know what I am doing wrong. I guess I can pass in the underscore delimted string to the stored procedure and parse it there, but my question is can this be done in the report? Reason being other callers will pass in the parameters as two seperate values.

Read the article

Is it possible that a single-threaded program is executed simultaneously on more than one CPU core?

- by Wolfgang Plaschg

When I run a single-threaded program that i have written on my quad core Intel i can see in the Windows Task Manager that actually all four cores of my CPU are more or less active. One core is more active than the other three, but there is also activity on those. There's no other program (besided the OS kernel of course) running that would be plausible for that activitiy. And when I close my program all activity an all cores drops down to nearly zero. All is left is a little "noise" on the cores, so I'm pretty sure all the visible activity comes directly or indirectly (like invoking system routines) from my program. Is it possible that the OS or the cores themselves try to balance some code or execution on all four cores, even it's not a multithreaded program? Do you have any links that documents this technique? Some infos to the program: It's a console app written in Qt, the Task Manager states that only one thread is running. Maybe Qt uses threads, but I don't use signals or slots, nor any GUI. Link to Task Manager screenshot: http://img97.imageshack.us/img97/6403/taskmanager.png This question is language agnostic and not tied to Qt/C++, i just want to know if Windows or Intel do to balance also single-threaded code on all cores. If they do, how does this technique work? All I can think of is, that kernel routines like reading from disk etc. is scheduled on all cores, but this won't improve performance significantly since the code still has to run synchronous to the kernel api calls. EDIT Do you know any tools to do a better analysis of single and/or multi-threaded programs than the poor Windows Task Manager?

Read the article

WPF Textbox & Borders - curious resizing behavior

- by CitizenParker

The following XAML produces a window with strange behavior around the textbox: <Window x:Class="WpfSandbox.CuriousExample" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="CuriousExample" Height="300" Width="300"> <DockPanel Margin="15"> <TextBox BorderThickness="1" BorderBrush="#FF000000"></TextBox> </DockPanel> </Window> What happens, at least during my limited testing, is that the textbox renders with an inset border pattern (top/left is black, right/bottom is grey). However, when you resize to any position except the original, the entire textbox border goes to black. Whenever you return the window to the exact number of on-screen pixels the form had when it first loaded, it's inset again. I'm guessing it isn't pixel snapping as I can easily correct the problem with this code: <Window x:Class="WpfSandbox.CuriousExample" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="CuriousExample" Height="300" Width="300"> <DockPanel Margin="15"> <Border BorderThickness="1" BorderBrush="#FF000000"> <TextBox BorderThickness="0" ></TextBox> </Border> </DockPanel> </Window> Anyone care to venture an explanation as to what I'm seeing? Or is it all in my head? Like I said, the above workaround can resolve this problem - just trying to understand what is happening here. Thanks, -Scott

Read the article

How to use EffectUpdate?

- by coma

So, this is my sample: <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:mx="library://ns.adobe.com/flex/mx" xmlns:s="library://ns.adobe.com/flex/spark"> <fx:Style> @namespace s "library://ns.adobe.com/flex/spark"; @namespace mx "library://ns.adobe.com/flex/mx"; s|Application { background-color: #333333; } #info { padding-top: 5; padding-right: 5; padding-bottom: 5; padding-left: 5; font-size: 22; background-color: #ffffff; } #plane { corner-radius: 8; background-color: #1c1c1c; } </fx:Style> <fx:Script> import mx.events.*; private var steps:uint = 0; private function effectUpdateHandler(event:EffectEvent):void { info.text = "rotationY: " + plane.rotationY + " ; steps: " + steps; steps++; } </fx:Script> <fx:Declarations> <s:Rotate3D id="spin" target="{plane}" autoCenterTransform="true" angleYFrom="0" angleYTo="360" repeatCount="10" effectUpdate="effectUpdateHandler(event)" /> </fx:Declarations> <s:VGroup horizontalAlign="center" gap="50" width="100%"> <s:Label id="info" width="100%"/> <s:BorderContainer id="plane" width="200" height="200" click="spin.play()"/> </s:VGroup> </s:Application> and it doesn't make me happy.

Read the article

onLoad focus() event within jquerytools overlay effect

- by tomcritchlow

Hi, I'm using the overlay jquery from here: http://flowplayer.org/tools/overlay/index.html Within my overlay I have a search box like this: <div class="simple_overlay" id="asearch"> <div id="searchbox"> <form id="amazonsearch" style='float:left;'> <input class="title" id="amazon-terms" style="width:400px;font-size:2em;"> <button class="sexybutton sexysimple sexygreen">Search</button> </form> <div id="amazon-results"></div> </div> </div> What I want to happen is when you load the overlay the search box within the overlay gains focus so you can start typing into it. I thought that this would work: $("a[rel]").overlay({ onLoad: function() { $('#amazon-terms').focus(); } }); But that doesn't seem to do anything. I know the event is firing because this works: $("a[rel]").overlay({ onLoad: function() { alert('popup opened') } }); However, when this alert fires the overlay has not yet appeared on the screen so I wonder if that is part of the problem? According to the docs onLoad should fire "when the overlay has completely been displayed" (ref) Any help appreciated! :) Thanks Tom EDIT This code does what I want it to but I'm none the wiser as to why this works when the code above doesn't.... var triggers = $("a[rel]").overlay({ closeOnClick: false, onLoad: function() { $('input').focus(); } });

Read the article

MS Word Macro - Numeric field insertion with automatic calculation at end of page

- by Will

Hi, I am trying to duplicate a feature that exists in Multimate (Ashton Tate) word processor. Yes, the one that hasnt been supported for 20 years! If I can duplicate this one feature I can get all the users off MM and onto Word. The documents they create are billing documents. they consist of a descriptive paragraph of any length on the left side of the page, and a billing amount at the end of the paragraph over on the right hand side, like this (excuse the imperfect formatting).... +-----------------whole page--------------------+ | | | pppp-para 1-pppppppppp | | p p | | p p | | p p | | p p | | p p | | p p | | pppppppppppppppppppp $$$$$ | | | | | | pppp-para 2-pppppppppp | | p p | | p p | | p p | | p p | | p p | | p p | | pppppppppppppppppppp $$$$$ | | | | | | etc | +-----------------------------------------------------+ some of these bills can be a few hundred pages and have a dozen or so paragraphs on each page, which is why none of the users will leave MM until this efficient little feature can be duplicated. The thing that MM does really easily is that there is a function key that they can press at any time that will - - jump the cursor from the paragraph they are writing over to the right hand side - create a numeric field - allow them to enter a number into the numeric field - return them to the left hand side to start a new paragraph What MM also does is automatically total the numeric fields on each page and create a subtotal in the page footer. it also creates a total for the entire document and puts this in the footer of the last page. I would like to duplicate this feature in word with a macro, but have no idea where to start. Any suggestions or code would be great, thanks, will.

Read the article

Create Generic method constraining T to an Enum

- by johnc

I'm building a function to extend the Enum.Parse concept that allows a default value to be parsed in case that an Enum value is not found Is case insensitive So I wrote the following public static T GetEnumFromString<T>(string value, T defaultValue) where T : Enum { if (string.IsNullOrEmpty(value)) return defaultValue; foreach (T item in Enum.GetValues(typeof(T))) { if (item.ToString().ToLower().Equals(value.Trim().ToLower())) return item; } return defaultValue; } I am getting a Error Constraint cannot be special class 'System.Enum' Fair enough, but is there a workaround to allow a Generic Enum, or am I going to have to mimic the Parse function and pass a type as an attribute, which forces the ugly boxing requirement to your code. EDIT All suggestions below have been greatly appreciated, thanks Have settled on (I've left the loop to maintain case insensitivity - I am usng this when parsing XML) public static class EnumUtils { public static T ParseEnum<T>(string value, T defaultValue) where T : struct, IConvertible { if (!typeof(T).IsEnum) throw new ArgumentException("T must be an enumerated type"); if (string.IsNullOrEmpty(value)) return defaultValue; foreach (T item in Enum.GetValues(typeof(T))) { if (item.ToString().ToLower().Equals(value.Trim().ToLower())) return item; } return defaultValue; } }

Search Results

Search found 18648 results on 746 pages for 'left join'.

Page 624/746 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631 | Next Page >

- by ouzz

- by bgadoci

- by Shawn O'Hern

- by Garret Raziel

- by Qua

- by Albert Kam

- by lyrae

- by Riccardo

- by Martin

- by scotru

- by dreftymac

- by dreftymac

- by mehmet.ali.anil

- by KiTe

- by Hanpan

- by newba

- by McVey

- by phunehehe

- by Mike

- by Wolfgang Plaschg

- by CitizenParker

- by coma

- by tomcritchlow

- by Will

- by johnc

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631 | Next Page >