Search Results

Search found 7371 results on 295 pages for 'raid card'.

Page 64/295 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Anyone tried dd'ing Raidmembers?

    - by DusteD
    I want replace all disks in a 10 disk raid6 (linux software raid). I could do this by pulling a disk, let the array rebuild, rinse, repeat. But this would take a very long time, and cause 10 rebuilds, which would most likely stress all 10 disks much more than simply reading each disk through once. My question is thus: Could I just shut down the array, and dd each old disk to a new disk and then start the array with the 10 new disks? In an ideal world, I would build another server and just copy the data via network, but this is not an ideal world.

    Read the article

  • PERC 5/i Enable alarm on disks failures

    - by Andy M
    I'm trying to enable one the alarm of my server's raid controller PERC 5/i. Using this documentation, under the chapter Audible Alarm Warnings, it's explained that enabling an audible alarm is allowed in order to quickly spot failures on my hard disks. My trouble is that when entering the disk controller configuration (Ctrl+R at boot time), I'm able to set up lot of things but I cannot navigate to Enable Audible Alarm. I have : Enable Controller BIOS Enable Alarm Enable BIOS stop on Error I can navigate with my arrow keys to both the first and third items, but I cannot navigate to or select the second! It's not greyed out, and seems like I should be able to select go on this entry, but my cursor keep skipping it. Any ideas about what I'm missing here?

    Read the article

  • What's the best external hard drive configuration for a software developer laptop?

    - by Dan
    I've got a Dell laptop that I use as a software developer box at work and find that the drive is usually the bottleneck. I'd like to hook up two 10k RPM drives that are striped for performance. I've looked for drive cases with RAID but there don't seem to be very many choices and I'm worried about compatibility with the drives (preferably SATA 2). Also I don't have a SATA connection on my machine so it'll have to USB 2.0 for now. Am I headed down the right path or am I missing a much simpler configuration?

    Read the article

  • Data drive disappearing.

    - by Mike Keller
    We have a Windows 2003 R2 server with SP 2 here that randomly loses a partition. There are two partitions the C: and the D: (the one that disappears). When I go into Disk Management the space shows available on the drive but that it isn't formated. There are two drives that are set up in a RAID 1 array. There isn't anything sticking out in the event log as to something triggering this problem and thank god we do daily backups of the data, but it gets kind of annoying to have to go back in there and reformat the partition and restore the data. Any places I can poke around to find the cause of this or even better solutions to the problem would be appreciated.

    Read the article

  • Diagnose Slow Video Playback during Editing [closed]

    - by chadejah Hunter
    Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

    Read the article

  • RAID0 PROBLEM WITH A SONY SPORTING A NEW HDD

    - by redrock
    Sony Windows 7 PC. Originally had 2 x 300Gb HDD. One HDD completely pancaked so have replaced with a new 500Gb HDD. When both drives are connected the 300GB doesn't appear to be recognised as a 300Gb HDD as a seperate entity. BIOS sees it but the operating system only sees a total of 465GB of HD space. When both disks are attached unde disk management it shows one 465Gb as RAID 0 and the new drive as STxxxxxx 465Gb. My question I guess is what should I see in total HDD space and is this configured correctly as I thought I would see 2 seperate drives 1x500Gb and 1x300Gb. My customer insisted that prior to the HDD crash he saw 2 drives both registering as 300Gb (a c: and d: drive).

    Read the article

  • SAN shows as unallocated in Windows Server

    - by Gareth Ferneyhough
    Hello. We have a SAN drive that shows as unallocated in Windows Server 2008. I believe it is a raid 10 with 4+ disks. The disks are in good health. I think a server that we rebuilt tried to connect to the drive and re-initialized them, or re-wrote the partition table. (excuse my poor terminology). We ran TestDisk on the drive and it shows no partitions, so now we are doing a quick search (which is not so quick). Can anyone else suggest anything? Thanks, Gareth

    Read the article

  • sound clipping in windows 7 64bit

    - by Sonic Soul
    something is up with 64 bit version of windows 7. i have 2 (good pro-sumer) sound cards which i've used in other version of windows 7 w/out problems, but now it is causing severe clipping (noise, sound having little gaps surrounded by static).. the cards i am using is echo mia, and native instruments audio kontrol 1. the audio kontrol 1 is a external card, and would work ok for a few hours after rebooting, and than it would go back into clipping mode, to the point where you tube videos would not play from trying to process sound and it stopping for extended periods of time. echo mia is performing better, but there is still some clipping and distortion. the machine i use is newly built, with i7 920 64 bit cpu, 6 gigs of ram and an outdated nvidia video card (geforece 7950 gx2)

    Read the article

  • Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

    - by Giffyguy
    I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

    Read the article

  • Laptop hot after format

    - by Dany Khalife
    I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

    Read the article

  • iSCSI RAID1 on two servers, fail scenario

    - by Franz Kafka
    Hallo, a simple question: Image I have two servers, each server has two disks in RAID1. Now I merge the two arrays with iSCSI to one RAID1 disk. Two questions: Can I do the merging of the 4 disks in one go? I can't image how. First I will have to install the os, and then the raid controller is already set up to RAID1. If a whole server fails the other server would continue working without any problems? Does iSCSI notice that the other server is missing and treet this as if the two disks were broken? When the server comes back online the data is resynced, as if I installed new disks into a array? Can I image that this way? Thanks alot.

    Read the article

  • Mavericks Dock Lag

    - by Syle
    Im having an weird bug on my MacBook Pro. When I start the machine, the dock have some graphic lag, the same when I open and close windows. The solution is simple, just open the AutoCAD and close it and the bug is gone. The same if I open AutoDesk Maya or other similar 3D program. My question where is not how to fix it, but why it happens. Its like Mavericks on the start thinks: Well you can only use a little memory of the graphic card! But if i open AutoCad, its like: Oh you are opening AutoCad so its better starting boosting the graphic card and giving you more memory. I bet there is something that is forcing Mavericks to think like this. Any help is welcome! =)

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • MPD to play music to single channel of my multi-channel card?

    - by hany tawfik
    I installed an Ubuntu 12-04 LTS server for a special background music application of mine, where I am using the server with an Asus Xonar DS sound card. The installation is successful, the MPD is working, the sound card is working with Alsa and its libraries installed accept for Alsa-oss. Alsamixer is working fine with left/right sides of each channel volume control through Q/Z letters shortcut when alsamixer is open in terminal . using the command " speaker-test -Dplug:surround71 -c8 -l1 -twav " I can hear every voice message coming out from the card at the right connector, so "front right/ front left" voice message are coming from first output in the card back, while the other outputs are silent..so on. The problem is that MPD is playing on all outputs simultaneously the same audio. I have been trying various configurations for the last 12 days with out any success, including trying to put mappings in the /etc/asound.conf Can any body help me achieve the above, or direct me to the right configuration of MPD or asound.conf

    Read the article

  • Operative systems on SD cards

    - by HisDudeness
    I was getting some wild ideas the last days, like putting some operative systems into SD cards rather than on my hard drive. I'll go further into details now and explain what lead me to consider this probably abominable decision. I am on a laptop (that means I have a native SD-card reader) which is currently running a cross-distro setup, with a bunch of Linux systems (placed in dedicated ext4 logical partitions into a huge extended one) regulated by an unique GRUB. Since today, my laptop haven't even seen any Windows system with binoculars. I was thinking about placing all the os part of my setup into a Secure Digital to save all my 500 Gb Hard Drive for documents, music, videos and so on, and being able to just remove the SD and boot my system into another computer too, as well as having the possibility of booting other systems into mine by just plugging in another SD, without having to keep it constantly placed in my PC. Also, in the remote case in the near future I just wanted to boot Windows 8 in it, I read it causes major boot incompatibility issues with other systems by needing a digital signature in order for them to start. By having it in a removable drive, I could just get rid of it when I'm needing him and switch its card with Linux one, and so not having any obstacles to their boot. Now, my questions are: I know unlikely traditional rotating disk drives, integrated circuits ones have a limited lifespan in terms of cluster rewriting. Is it an obstacle to that kind of usage? I mean, some Ultrabooks are using SSD now, is it the same issue, or there are some differences between Solid State Drives and Secure Digitals in that sense? Maybe having them to store system files which are in fixed positions (making the even-usage of cluster technology useless) constantly being re-read and updated and similar things just gets them soon unserviceable, do it? Second question: are all motherboards and BIOSes able to boot from SDs just like they are from USB pen drives (I mean, provided card reader is USB-connected, isn't it)? Or can't bootloaders like GRUB be installed on SDs working? If they can't, is it a solution installing GRUB to MBR and making boot option pointing to SD? Will it work? Are there any other problems to installing OSs on a Secure Digital?

    Read the article

  • Configuration Tuning for PostgreSQL 9.1 PostGIS 1.5 Ubuntu 12.04 Server

    - by Martin
    My server performance is poor. At times SSH, top, and other features or commands are very slow to respond, taking several seconds or more. A query that normally takes 5 minutes can sometimes take 30 minutes. The database is mostly being used to do a spatial query (grid and summarize) on approximately 500GB of stored data spread between 4 tables. Restarting the server works as a temporary fix, but cannot be used as a long term solution. Any suggestions for how to diagnose and solve my performance issues? Hardware and Configuration: 3.3 GHz Intel quad core i5 16 GB DDR3 RAM 6 TB software RAID 10 (6 x 2 TB drives) Ubuntu 12.04 64-bit Postgres 9.1 PostGIS 1.5

    Read the article

  • ESXi 4.0u1 - backup/copy options

    - by Hanadarko
    I have a machine built using ESXi 4.0u1 and it has 3 hard drives. I have my hosts built on different hard drives but wondering about backup options. I do not have RAID but I have 3 drives and 1 is totally empty. I had been using it to store ISOs for loading. So what options do I have to either create a 1 time copy onto the spare drive or some sort of snapshot to the spare drive? - There must be some way to do this either via the vsphere client or ssh into the ESXi box and go from there. Thoughts? -JD

    Read the article

  • Optimal Configuration for five 300 GB 15K SAS Drives

    - by Bob
    I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

    Read the article

  • Disk is apparently in use by the system

    - by Shaun
    I've just fitted two disks to my home server. I'm trying to format and then raid them but I'm getting a problem that hours of Googling hasn't resolved this. The error that I'm getting is: # mkfs.ext3 /dev/sdb1 mke2fs 1.39 (29-May-2006) /dev/sdb1 is apparently in use by the system; will not make a filesystem here! # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 4.0G 1.9G 2.0G 49% / none 380M 0 380M 0% /dev/shm /opt/xensource/packages/iso/XenCenter.iso 51M 51M 0 100% /var/xen/xc-install # mount -t ext3 /dev/sdb1 /mnt/b mount: /dev/sdb1 already mounted or /mnt/b busy I'm new to this and it's got me beat. I wouldn't ask if I hadn't done my research first. Thanks.

    Read the article

  • Booting Windows7 kernel from an initrd/wim image file

    - by Ivo
    I'm wondering if it's possibile to have Win7 kernel and relative drivers (especially storage drivers) to boot from an initrd-like image file (maybe .wim?) and later then mount the windows root partition and complete the load of the full OS? I'll try to explain why: I'm running an emulated environment with NO REAL BIOS, and I'm passingthrough a raid storage controller. I want windows to boot from this controller array, but of course the BCD manager cannot access disks in the array until kernel and relative controller storage drivers are loaded. To be clear I get the classical winload.exe missing error. I need a similar solution to what Linux does, loading the kernel and his drivers, and later then mount the root partition and complete the boot. Any ideas or advices?

    Read the article

  • Why doesn't 12.04 recognize my ATI Radeon X300SE graphics card?

    - by Nomad Zero
    So far everything including the BCM4321 card is working, however, the OEM ATI Radeon X300SE (RV370) is not recognized. When I go into system details the card comes up as unknown. When I run lspci the card shows up as: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV370 5B60 [Radeon X300 (PCIE)] 01:00.1 Display controller: Advanced Micro Devices [AMD] nee ATI RV370 [Radeon X300SE] I have attempted check Additional Drivers but the card does not show up as needing a driver. So far this is causing the system to run warmer as the processor is doing a bit of the work to run Unity and any full screen videos tend to be rather choppy. Is there an available driver that will fix my issue and what is the install method? I am not scared to run a terminal so no worries there, as long as I have instructions, I can find my way. I am running under 12.04 LTS Kernel 3.2.0-25-generic-pae

    Read the article

  • ATI Radeon HD 5970 Display numbering issues

    - by Arindam Sen
    I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

    Read the article

  • Is it possible to add hardware on a remote machine and use it as if it was installed on the local machine?

    - by that0th3rGuy
    Probably a silly question. We have two computers in the apartment running Windows 7 and Windows Vista. 99% of the time we use headphones but every now and then we have a desire for some ambiance so we got a set of 2.1 speakers. But now only one of us has access to the speakers unless we move them around every now and then. So I was wondering if it's possible to add the other computer's sound card as a hardware device on my computer so that I can configure, for instance, Winamp to play through the other computer's sound card, hence the speakers connected to the other computer.

    Read the article

  • BSOD when playing Portal 2 using ATI Radeon 4800 on H61M/U3S3 mobo

    - by Ben Walker
    playing Portal 2 will always give me blue screen of death, usually after about 10 minutes of playing. BSOD references atikmpag.sys. I have tried several updates for graphics driver and through ATI Catalyst Center. I have updated the motherboard BIOS. My RAM is OK. Nothing changes. I had previously run the game fine, then I removed my video card to use on-board graphics once, and after re-installing the video card, I get this problem every time. I am using: ATI Radeon 4800 ASRockH61M/U3S3 motherboard Windows 7 64-bit

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >