Search Results

Search found 62172 results on 2487 pages for 'windows networking'.

Page 64/2487 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Windows 7 Not Recognizing Any Hardware, Linux Recognizing Hardware

  - by Newb

  I have a new desktop computer with two SSDs: one running Linux Mint 15 (SSD1), the other running Windows 7 (SSD2). My mint runs perfectly - USB wireless adapter is recognized, SSD2 (connected by SATA) is recognized and accessible through the filesystem, Ethernet works, etc. However, my Windows 7 is not recognizing any of these devices - even plugging in a regular ethernet cable doesn't work. It seems that it's not recognizing any network adapters, and it also doesn't recognize SSD1, connected to the mainboard by SATA. I've installed, uninstalled, and reinstalled Windows multiple times, but the problem persists. I used the Windows 7 CD to install Windows on a machine previously, and that time around, I didn't have any problems, which leads me to suspect that this might be a hardware issue, specifically with the mainboard. My mainboard is an MSI-7641 model, the 760GM-P34 FX. It uses an AMD Chipset and an AMD processor. Can anyone suggest what might be wrong, and how to fix it?

  Read the article

• Wifi not working after a few minutes

  - by drtanz

  I'm using a few MacBooks and iPads connected to a router via WiFi. The problem is that a few minutes after they connect via WiFi the connection stops working. This happens on all devices. I went into the router settings by connecting via cable and everything seems in order. Connecting a laptop via cable to the router I can use internet as normal, the problem is only with WiFi. What can be the problem here? Here are the connected clients Connected Clients MAC Address Idle(s) RSSI(dBm) IP Addr Host Name Mode Speed (kbps) 14:10:9F:F3:48:D6 1 -36 192.168.0.5 Jeans-Air n 78000 14:99:E2:C6:41:10 1 -36 192.168.0.8 JeanGaleasiPad n 24000 Here's the router event log Mon Dec 30 04:12:30 2013 Notice (6) WiFi Interface [wl0] set to Channel 1 (Side-Band Channel:N/A)... Mon Dec 30 04:12:25 2013 Notice (6) WiFi Interface [wl0] set to Channel 1 (Side-Band Channel:5) -... Mon Dec 30 02:17:56 2013 Notice (6) WiFi Interface [wl0] set to Channel 40 (Side-Band Channel:36)... Mon Dec 30 02:16:04 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:7) ... Mon Dec 30 01:59:26 2013 Notice (6) WiFi Interface [wl0] set to Channel 6 (Side-Band Channel:N/A)... Mon Dec 30 01:59:22 2013 Notice (6) WiFi Interface [wl0] set to Channel 6 (Side-Band Channel:2) -... Sun Dec 29 23:27:51 2013 Notice (6) WiFi Interface [wl0] set to Channel 1 (Side-Band Channel:N/A)... Sun Dec 29 23:27:49 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:N/A... Sun Dec 29 14:32:55 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Sat Dec 28 13:08:19 2013 Error (4) DHCP REBIND WARNING - Field invalid in response ;CM-MAC=1c:3e... Fri Dec 27 18:10:19 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Fri Dec 27 16:08:55 2013 Error (4) Map Request Retry Timeout;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Thu Dec 26 21:08:53 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:7) ... Thu Dec 26 20:43:50 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:N/A... Tue Dec 24 12:45:03 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Tue Dec 24 04:55:52 2013 Error (4) Map Request Retry Timeout;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Mon Dec 23 12:32:00 2013 Notice (6) TLV-11 - unrecognized OID;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Mon Dec 23 12:32:00 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.9;CM-MAC=1c:3e:... Mon Dec 23 12:32:00 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.8;CM-MAC=1c:3e:... Mon Dec 23 12:32:00 2013 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MAC... Mon Dec 23 18:32:02 2013 Notice (6) Honoring MDD; IP provisioning mode = IPv4 Mon Dec 23 18:31:10 2013 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=1c:3e:84:f1... Mon Dec 23 18:28:57 2013 Critical (3) Received Response to Broadcast Maintenance Request, But no Un... Mon Dec 23 18:28:25 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Mon Dec 23 12:17:48 2013 Notice (6) TLV-11 - unrecognized OID;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Mon Dec 23 12:17:48 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.9;CM-MAC=1c:3e:... Mon Dec 23 12:17:48 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.8;CM-MAC=1c:3e:... Mon Dec 23 12:17:48 2013 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MAC... Mon Dec 23 18:17:48 2013 Notice (6) Honoring MDD; IP provisioning mode = IPv4 Mon Dec 23 18:16:58 2013 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=1c:3e:84:f1... Mon Dec 23 18:16:15 2013 Critical (3) Received Response to Broadcast Maintenance Request, But no Un... Mon Dec 23 18:15:43 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ...

  Read the article

• netsh add profile returns "An attempt was made to load a program with an incorrect format."

  - by Tunisia

  Using netsh, I used the following command to add a wireless profile add profile filename="c:\profiles\DLINK-Profile.xml" interface="D-Link DWA-125 N150" All parameters are valid. But I get the error "An attempt was made to load a program with an incorrect format." I know this error is related to OS architecture 64bit or 32 bit. But i'm not sure which program is not compatible. I'm using Win7 64bit

  Read the article

• Configure a wireless network that accepts any WPA2-PSK network key

  - by Michel

  I recently bought a UART WiFi module ( this one ) and configured it with right SSID but wrong password( and I don't know what it is ). The problem is that I can't reset this module to its manufacture settings and I can't connect to this module via serial port to configure it with some wire or cable. But I'm sure that my module is trying to connect my access point but with wrong network key ( because in logs of my access point I can see my module that trying to connect but it can't ) So, I wonder to know is there any way to create or configure a network (using some access point or something else) based on WPA2 Personal security that accepts any WPA2-PSK passwords ? Or is there any other solution for this problem ? If no, is there anyway to see what password this module using to connect to that network ? ( If yes, then I can change password of my network to that password and access to this module's admin panel ) I tried create an open network ( without any security key ) but my module just searches for WPA2 based networks ( I think ).

  Read the article

• Recommended ADSL/ADSL2 router that supports PPTP VPN dial-out, 802.11n and gigabit ethernet?

  - by Throlkim

  I'm looking for a new router to provide a VPN tunnel for my home network. My plan is to pass all internet traffic over a PPTP VPN provided by the router, which should ensure that the connection stays alive and only passes traffic over that protocol. I'm normally quite a fan of Draytek routers, and their 2710n does seem to feature VPN dial-out but it lacks Gigabit ports (though I can make do with that if the VPN support is good enough). Has anyone got any suggestions or personal experience in a similar setup? I'm happy to consider anything that supports dd-wrt (as I believe that supports VPN-out, though I may be wrong). Bonus points for models available in the UK.

  Read the article

• Wifi as LAN - Is it possible ? How ?

  - by sagar

  Hello ! Every one. I am having a query regarding WiFi network. I am having PC & LapTop. Now, Let me explain the situation. I requested My WiFi providers that I want connection in my PC. So that - WiFi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my pc is not having inbuilt wifi functionality. Now - almost laptops have inbuilt functionality. Now - On terrace there is wifi with superb speed. But on my flat - wifi comes with low speed. so, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

  Read the article

• windows 7 start menu's search "see more results" broken

  - by fluxtendu

  After searching in my start menu and clicking to "see more results", I got an error dialog: It "seems" that it should be search-ms:query=document an not search:query=document but where can I fix this? Additional info: New user account don't have the problem. Windows 7 Ultimate - RTM Disabling/Enabling again "Windows Search" (in Start Control Panel Programs Turn Windows Features on or off) doesn't fix it. (There's a HKEY_CLASSES_ROOT\Search in my registry that's not there normally.) - outdated see comments... Update: It could help me to diagnose, if someone send me any (hidden) files in %userprofile%\searches and some others pieces of registry: HKEY_CLASSES_ROOT\.search-ms HKEY_CLASSES_ROOT\.searchConnector-ms HKEY_CLASSES_ROOT\SearchFolder HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Associations\UrlAssociations\SEARCH HKEY_CURRENT_USER\Software\Microsoft\Windows Search Any other related key that I don't have seen... Final Update: Resolved by the rastamanx answer (I can't accept the answer, because I have offer a bounty without accepted answer, vote for him please)

  Read the article

• DD-WRT Router acting as a Switch and Wi-Fi AP

  - by dotnetchris

  Recently I upgraded to Comcast Business and their modem has a built-in router so I took off my DD-WRT router and moved to a location in my home where I needed more ports and Wi-Fi (preferably without running new Ethernet cables since it's 50-100 foot run through floor and ceilings). I have my network cable from my Comcast modem going into Port 1 of my DD-WRT router with Port 2 and 3 being networked PCs. I have DD-WRT setup as a DHCP forwarder with the firewall disabled. This lets my all of my devices access the network fine. Is the correct the way to do this? Or is this a less optimal solution and it should be done in a slightly different way?

  Read the article

• Time Machine + Ubee Router?

  - by Charlie

  I can't for the life of me figure this out. I recently had TWC installed in my house, and wanted to disable the NAT and router functions of it. I have a Time Machine hooked up to it from LAN1 (on the Ubee) to the WAN port on the TM. The problems started occurring here. I figured the settings would be these: Ubee Configuration mode: Bridge DHCP: Off TM IPv4: 192.168.100.2 Subnet Mask: 255.255.255.0 Router Address: 192.168.100.1 DNS Servers: 8.8.8.8, 8.8.4.4 Router Mode: DHCP and NAT But using those settings, my TM says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT. This leads me to believe bridge mode doesn't actually turn off NAT...

  Read the article

• What's a good, affortable router that will not give me problems when downloading torrents?

  - by Lirik

  I found several routers on newegg and they're in the $50-60 range, but I'm not sure if they'll handle the number of connections that are created when downloading torrents (100-300 seeds and around 50 peers). My roommate watches netflix movies, my brother and I download torrents, so my NETGEAR router ends up choking on the traffic and I have to restart it quite frequently. I've already posted a couple of questions on the topic and I've come to the conclusion that I need a new router. What are some routers that I should consider (my budget is in the $50 range)?

  Read the article

• IPCop server slows down download speed

  - by noocyte

  I have an IPCop server running at home, been doing just fine for ~5 months, but last week I suddenly started getting time-outs and slow downloads from the 'net. I first thought that this was my ISP acting up, then I thought it might be one of my 3 switches or some of my cabling. In due order I've tested everything above and found them all to be working as they should. The only factor remaining is my IPCop server. Facts: I've got a 15/15 Mbit line (fiber) and I get ~15 Mbit upload, but only 0.5 Mbit download with the IPCop box as router (ISP router set in bridge mode). If I connect without the IPCop box (using the ISP router) I get ~12 Mbit upload and ~15 Mbit download. The load on the IPCop box appears to be light and it used to handle this traffic just fine 2 weeks ago. The memory usage is ~60%, I tried to restart it and test again, the memory fell to ~50% then (5 months of uptime). I'm thinking that one of my nics are busted, but I'm sort of perplexed that this could be the outcome; slow download but full speed upload. Anybody ever seen that happening before? Could it just be one of the nics that needs to be replaced? Will try that as soon as I can get my hands on a couple of new ones.

  Read the article

• diagnostic multicast issue using wireshark

  - by Abruzzo Forte e Gentile

  I have a network that is setup for multicast traffic. My setup is the following -Machine A : a server generates multicast traffic. -Machine A : few clients subscribing to that multicast traffic -Machine B : few clients subscribing to that multicast traffic # Address I am using IP : 239.193.0.21 PORT: 20401 The clients in machine A , even if they join the group (I can see IGMP messages through wireshark), don't receive any data while (and this is the funny part) machine B,C and D receive everything. I sorted that issue by completely disabling Linux firewall. Before doing that, I enabled the multicast on the firwall ('reject all'). iptables -A INPUT -m addrtype --src-type MULTICAST -j ACCEPT My question is the following: what I can check in wireshark that can help me in spot such firewall issues in the futures? For TCP/IP I realize by using ping and looking at ICMP packets rejected. What I can check/monitor for multicast? I am using LInux/Red-Hat Enterprise 6.2

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• Multiple Wireless Networks via Airport?

  - by Moshe

  Is it possible to to connect to multiple networks at the same time using the AirPort wireless card on my iMac 21.5"?

  Read the article

• Win 7 - Restore Favorites in Windows Explorer

  - by oceola

  Hi all, have this issue - the Favorites link in windows explorer doesn't work. I can't drag and drop anything to it, I can't 'Add current location to Favorites'. Clicking on 'Restore Favorites' does nothing. I can't remember when this started, but I assume I accidentally deleted the Favorites folder. I should probably mention that my user profile is ntfs-junctioned to D:\Users\myname. I tried creating a new Favorites folder, giving it all possible permissions, but that doesn't work. I tried to look in the registry, under HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\Shell folders HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Explorer\User Shell folders HKEY_USERS\.default\Software\Microsoft\Windows\Current Version\Explorer\Shell folders HKEY_USERS\.default\Software\Microsoft\Windows\Current Version\Explorer\User Shell folders I played with the values in there (pointing to C:\Users\myname\Favorites, D:\Users\myname\Favorites), but nothing seemed to help. Any help would be much appreciated.

  Read the article

• How do I get more information on a potential network freeloader?

  - by Dov

  I have a home network set up, complete with a relatively good password. I'm in Mac OS X 10.6 (Snow Leopard) and have been noticing, on occasion, a computer showing up in my Finder's Shared section, that is not one of my own (the "pe-xpjalle" box pictured below). He has a tendency to come and go. How can I figure out his MAC address or something, so I can block him? I checked my "Logs and Statistics" in the Airport Utility, and didn't see that computer under DHCP clients. I'd rather not change my password, since I have quite a few devices I'd have to update. Is there any other reason he's show up on my network besides having guessed my password? Update: I fixed the Dropbox URL above (how embarrassing, I'm new to Dropbox. Thanks for the heads up, Doug.) Update 2: I tried clicking on "Connect as..." just for the hell of it, and got the dialog below. Now I have even less an idea what's going on than before. I don't have Parallels of VMware running, just the following: Transmission, NetNewsWire, Mail, Things, Safari, iTunes, Photoshop, Pages, Yojimbo, Preferences, AppleScript Editor, Software Update, Airport Utility, and Terminal. I don't think any of those create a virtual network machine, right? And no VMware machine of mine has ever had a name resembling "pe-xpjalle". Update 3: I just changed my passwords on both my N- and G-only networks, and I'm still seeing this, so I highly doubt that it's someone who's figured out my password (twice now). I'm really stumped.

  Read the article

• Can't connect to LAN when connected to D-Link DIR-615

  - by Senseful

  I'm have a D-Link DIR-615 Wireless N 300 Router. I didn't use the CD it comes with to set up the network. Instead I configured it manually through the router's settings that are accessed via a web browser. The main changes I made are: Secured the router so that a password is required before clients can use the wireless internet. Broadcasting 802.11N only (not B or G). I can connect to the router just fine and I'm able to access the internet. The only problem is that I don't see any of the other computers in my LAN. When I try connecting to another Wi-Fi router that I have (which is connected to the same network), I can see all of the computer's on my LAN just fine. Therefore, I'm guessing that the reason I can't connect to the LAN is not a problem with my computer and is a problem with the router instead. I'm on a MacBook Air running Mac OS X 10.6.6. I tried contacting D-Link technical support, but they only try to help you if you have problems connecting to the internet. They aren't really concerned with problems that have to do with the accessing PC's on the same network.

  Read the article

• UDP multicast streaming of media content over WIFI

  - by sajad

  I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

  Read the article

• Configure IPv6 routing

  - by godlark

  I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

  Read the article

• Setting up a wireless network with Verizon MiFi

  - by winarm

  I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

  Read the article

• Static DHCP!?

  - by voyager

  I've found some home wireless routers/ADSL+ modems (ZyXEL 660) talking about Static DHCP, when refering to assosiating a specific MAC to an IP, but still serve the configuration over DHCP. Doesn't this have another name? What does Cisco call this feature (that I know supports because I've used long time ago)?

  Read the article

• What's a good, affortable ruter that will not give me problems when downloading torrents?

  - by Lirik

  I found several routers on newegg and they're in the $50-60 range, but I'm not sure if they'll handle the number of connections that are created when downloading torrents (100-300 seeds and around 50 peers). My roommate watches netflix movies, my brother and I download torrents, so my NETGEAR router ends up choking on the traffic and I have to restart it quite frequently. I've already posted a couple of questions on the topic and I've come to the conclusion that I need a new router. What are some routers that I should consider (my budget is in the $50 range)?

  Read the article

• How to configure wpa_supplicant on RHEL6?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop. I uninstalled the default NetworkManager in order that I could configure the network all in the command line. The Ethernet part is okay, but I have problem bringing up the wireless interface. What I got is: Bringing up interface wlan0: Determining IP information for wlan0... failed; no link present. Check cable? I did exactly what this article says. I am not sure if it is because the article is obsolete or something else. Please help.

  Read the article

• Wireless Router will not allow connection

  - by Chris

  I am working with a RangeMax(TM) Wireless Router WPN824 v2, and it will not allow a wireless connection nor a wired connection. I am at an actual lost, with no way into the router I cannot test settings. I have unplugged it, left it off for a 32 hours, and reset it with no luck. Any ideas? Could the router just be done-zo?

  Read the article

• Copying files from NAS to NAS drives

  - by user1001421

  Very simple question. I've got 2 NAS drive that are "wire" connected via a router. If I have a wireless laptop and request a large amount of data be copied from one NAS drive to the other, does the network traffic go direct from the one drive to the other, going via the wired network, or does the network traffic go via my laptop, if you see what I mean. IE. From the NAS drives wired network, to the wireless network and then back to the wired network. Is this a common bottle-neck when copying a large amount of data? And if so, is there a way to avoid it. Thanks.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >