Search Results

Search found 17621 results on 705 pages for 'just my correct opinion'.

Page 654/705 | < Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >

• Simplifying a four-dimensional rule table in Matlab: addressing rows and columns of each dimension

  - by Cate

  Hi all. I'm currently trying to automatically generate a set of fuzzy rules for a set of observations which contain four values for each observation, where each observation will correspond to a state (a good example is with Fisher's Iris Data). In Matlab I am creating a four dimensional rule table where a single cell (a,b,c,d) will contain the corresponding state. To reduce the table I am following the Hong and Lee method of row and column similarity checking but I am having difficulty understanding how to address the third and fourth dimensions' rows and columns. From the method it is my understanding that each dimension is addressed individually and if the rule is true, the table is simplified. The rules for merging are as follows: If all cells in adjacent columns or rows are the same. If two cells are the same or if either of them is empty in adjacent columns or rows and at least one cell in both is not empty. If all cells in a column or row are empty and if cells in its two adjacent columns or rows are the same, merge the three. If all cells in a column or row are empty and if cells in its two adjacent columns or rows are the same or either of them is empty, merge the three. If all cells in a column or row are empty and if all the non-empty cells in the column or row to its left have the same region, and all the non-empty cells in the column or row to its right have the same region, but one different from the previously mentioned region, merge these three columns into two parts. Now for the confusing bit. Simply checking if the entire row/column is the same as the adjacent (rule 1) seems simple enough: if (a,:,:,:) == (a+1,:,:,:) (:,b,:,:) == (:,b+1,:,:) (:,:,c,:) == (:,:,c+1,:) (:,:,:,d) == (:,:,:,d+1) is this correct? but to check if the elements in the row/column match, or either is zero (rules 2 and 4), I am a bit lost. Would it be something along these lines: for a = 1:20 for i = 1:length(b) if (a+1,i,:,:) == (a,i,:,:) ... else if (a+1,i,:,:) == 0 ... else if (a,i,:,:) == 0 etc. and for the third and fourth dimensions: for c = 1:20 for i = 1:length(a) if (i,:,c,:) == (i,:,c+1,:) ... else if (i,:,c+1,:) == 0 ... else if (i,:,c,:) == 0 etc. for d = 1:20 for i = 1:length(a) if (i,:,:,d) == (i,:,:,d+1) ... else if (i,:,:,d+1) == 0 ... else if (i,:,:,d) == 0 etc. even any help with four dimensional arrays would be useful as I'm so confused by the thought of more than three! I would advise you look at the paper to understand my meaning - they themselves have used the Iris data but only given an example with a 2D table. Thanks in advance, hopefully!

  Read the article

• Making a JQuery tooltip retrieve a new value every time the mouse moves.

  - by Micheal Smith

  As i am developing an application that makes use of a tooltip that will display a different value when the user moves the mouse. The user mouses over a table cell and the application then generates a number, the further right the cursor moves in the cell, the higher the value increases. I have created a tooltip that runs and when the cursor mouses over the cell, it does indeed show the correct value. But, when the i move the mouse, it does not show the new value but just the older one. I need to know how to make it update everytime the mouse moves or the value of a variable changes, Any ideas for the problem? <table> <tr id="mon_Section"> <td id="day_Title">Monday</td> <td id="mon_Row"></td> </tr> </table> Below is the document.ready function that calls my function: $(document).ready(function() { $("#mon_Row").mousemove(calculate_Time); }); Below is the function: <script type="text/javascript"> var mon_Pos = 0; var hour = 0; var minute = 0; var orig = 0; var myxpos = 0; function calculate_Time (event) { myxpos = event.pageX; myxpos = myxpos-194; if(myxpos<60) { orig = myxpos; $('#mon_Row').attr("title", orig); } if (myxpos>=60 && myxpos<120) { orig=myxpos; $('#mon_Row').attr("title", orig); } if (myxpos>=120 && myxpos<180) { orig=myxpos; $('#mon_Row').attr("title", orig); Inside the function is the code to generate the tooltip: $('#mon_Row').each(function() { $(this).qtip( { content: { text: false }, position: 'topRight', hide: { fixed: true // Make it fixed so it can be hovered over }, style: { padding: '5px 15px', // Give it some extra padding name: 'dark' // And style it with the preset dark theme } }); }); I know that a new value is being assigned to the cells title attribute because it will display inside the standard small tooltip that a browser will display. The JQuery tooltip will not grab the new value and display it, only the variables initial value when it was called.

  Read the article

• Can't access font resource in Silverlight class library

  - by Matt

  I have a reasonably large Silveright 3.0 project on the go, and I'm having issues accessing a couple of custom font resources from within one of the assemblies. I've got a working test solution where I have added a custom font as a resource, and can access it fine from XAML using: <TextBlock Text="Test" FontFamily="FontName.ttf#Font Name" /> The test solution consists of the TestProject.Application and the TestProject.Application.Web projects, with all the fun and games obviously in the TestProject.Application project However, when I try this in my main solution, the fonts refuse to show in the correct type face (instead showing in the default font). There's no difference in the way the font has been added to project between the test solution and the main solution, and the XAML is identical. However, there is a solution layout difference. In the main solution, as well as having a MainApp.Application and MainApp.Application.Web project, I also have a MainApp.Application.ViewModel project and a MainApp.Application.Views project, and the problem piece of XAML is the in the MainApp.Application.Views project (not the .Application project like the test solution). I've tried putting the font into either the .Application or .Application.Views project, tried changing the Build Action to Content, Embedded Resource etc, all to no avail. So, is there an issue accessing font resources from a child assembly that I don't know about, or has anyone successfully done this? My long term need will be to have the valid custom fonts being stored as resources in a separate .Application.FontLibrary assembly that will be on-demand downloaded and cached, and the XAML controls in the .Application.Views project will need to reference this FontLibrary assembly to get the valid fonts. I've also tried xcreating this separate font library assembly, and I can't seem to get the fonts from the second assembly. As some additional information, I've also tried the following font referencing approaches: <TextBlock Text="Test" FontFamily="/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/MainApp.Application.Views;/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/MainApp.Application.Views;component/FontName.ttf#Font Name" /> And a few similar variants with different assembly references/sub directories/random semi colons. And so far nothing works... anyone struck this (and preferably solved it)?

  Read the article

• How to update NSMutableDictionary. My code doesn't work.

  - by dawatson833

  I've populated an array using. arrSettings = [[NSMutableArray alloc] initWithContentsOfFile:[self settingsPath]]; The file is a plist with the root as an array and then a dictionary with three three keys defined as number. I've also tried setting the keys to string. I display the values in the plist file on a view using. diaper = [[arrSettings objectAtIndex:0] objectForKey:@"Diaper Expenses"]; oil = [[arrSettings objectAtIndex:0] objectForKey:@"Oil Used"]; tree = [[arrSettings objectAtIndex:0] objectForKey:@"Wood Used"]; This code works fine, the values in the dictionary are assigned to the variables and they are displayed. The user can make changes and then press a save button. I use this code to extract the dictionary part of the array so I can update it. The assignment to editDictionary works. I've double checked the key names including case and that is correct. editDictionary = [[NSMutableDictionary alloc] init]; editDictionary = [arrSettings objectAtIndex:0]; NSNumber *myNumber = [NSNumber numberWithFloat:diaperAmount]; [editDictionary setValue:myNumber forKey:@"Diaper Expenses"]; myNumber = [NSNumber numberWithFloat:oilAmount]; [editDictionary setValue:myNumber forKey:@"Oil Used"]; myNumber = [NSNumber numberWithFloat:treeAmount]; [editDictionary setValue:myNumber forKey:@"Wood Used"]; In this example I've used a nsnumber. But I've also tried the xxxAmount field as part of SetValue instead of creating a NSNumber. Neither implementation works. Several strange things happen. Sometimes the first two setvalue statements work, but the last setvalue fails with a EXC_BAD_ACCESS failure. Other times the first setValue fails with the same error. I have no idea why the first two sometimes work. I'm at a loss of what to do next. I've tried several implentations and none of them work. Also, in the debugger how can I display the editDictionary elements. I can see editDictionary, but I don't know how to display the individual elements.

  Read the article

• Cannot find Symbol = new

  - by Nick G.

  Java is complaining! cannot find symbol symbol : constructor Bar() location: class Bar JPanel panel = new Bar(); ^ QUESTION: Why am I getting this error?...everything seems to be correct. this is the coding: public class JFrameWithPanel { public static void main(String[] args) { JPanel panel = new Bar(); } } Bar( ) is public class Bar extends JPanel { public Bar(final JFrame frame) { super(new BorderLayout()); String[] tests = { "A+ Certification", "Network+ Certification", "Security+ Certification", "CIT Full Test Package" }; JComboBox comboBox = new JComboBox(tests); TextArea text = new TextArea(5, 10); add(new JLabel("Welcome to the CIT Test Program ")); add(new JLabel("Please select which Test Package from the list below.")); JMenuBar menuBar = new JMenuBar(); JMenu fileMenu = new JMenu("File"); JMenu editMenu = new JMenu("Edit"); JMenu helpMenu = new JMenu("Help"); menuBar.add(fileMenu); menuBar.add(editMenu); menuBar.add(helpMenu); JMenuItem newMenu = new JMenuItem("New (Ctrl+N)"); JMenuItem openMenu = new JMenuItem("Open (Ctrl+O)"); JMenuItem saveMenu = new JMenuItem("Save (Ctrl+S)"); JMenuItem exitMenu = new JMenuItem("Exit (Ctrl+W)"); JMenuItem cutMenu = new JMenuItem("Cut (Ctrl+X)"); JMenuItem copyMenu = new JMenuItem("Copy (Ctrl+C)"); JMenuItem pasteMenu = new JMenuItem("Paste (Ctrl+V)"); JMenuItem infoMenu = new JMenuItem("Help (Ctrl+H)"); fileMenu.add(newMenu); fileMenu.add(openMenu); fileMenu.add(saveMenu); fileMenu.add(exitMenu); editMenu.add(cutMenu); editMenu.add(copyMenu); editMenu.add(pasteMenu); helpMenu.add(infoMenu); this.add(comboBox, BorderLayout.NORTH); this.add(text, BorderLayout.SOUTH); frame.setJMenuBar(menuBar); add(new JButton("Select") { { addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { frame.dispose(); JOptionPane.showMessageDialog(frame, "IT WORKS!"); } }); } }); } }

  Read the article

• Python/Biomolecular Physics- Trying to code a simple stochastic simulation of a system exhibiting co

  - by user359597

  *edited 6/17/10 I'm trying to understand how to improve my code (make it more pythonic). Also, I'm interested in writing more intuitive 'conditionals' that would describe scenarios that are commonplace in biochemistry. The conditional criteria in the below program is explained in Answer #2, but I am not satisfied with it- it is correct, but isn't obvious and isn't easy to implement for more complicated conditional scenarios. Ideas welcome. Comments/criticisms welcome. First posting experience @ stackoverflow- please comment on etiquette if needed. The code generates a list of values that are the solution to the following exercise: "In a programming language of your choice, implement Gillespie’s First Reaction Algorithm to study the temporal behaviour of the reaction A---B in which the transition from A to B can only take place if another compound, C, is present, and where C dynamically interconverts with D, as modelled in the Petri-net below. Assume that there are 100 molecules of A, 1 of C, and no B or D present at the start of the reaction. Set kAB to 0.1 s-1 and both kCD and kDC to 1.0 s-1. Simulate the behaviour of the system over 100 s." def sim(): # Set the rate constants for all transitions kAB = 0.1 kCD = 1.0 kDC = 1.0 # Set up the initial state A = 100 B = 0 C = 1 D = 0 # Set the start and end times t = 0.0 tEnd = 100.0 print "Time\t", "Transition\t", "A\t", "B\t", "C\t", "D" # Compute the first interval transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) # Loop until the end time is exceded or no transition can fire any more while t <= tEnd and transition >= 0: print t, '\t', transition, '\t', A, '\t', B, '\t', C, '\t', D t += interval if transition == 0: A -= 1 B += 1 if transition == 1: C -= 1 D += 1 if transition == 2: C += 1 D -= 1 transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) def transitionData(A, B, C, D, kAB, kCD, kDC): """ Returns nTransition, the number of the firing transition (0: A->B, 1: C->D, 2: D->C), and interval, the interval between the time of the previous transition and that of the current one. """ RAB = kAB * A * C RCD = kCD * C RDC = kDC * D dt = [-1.0, -1.0, -1.0] if RAB > 0.0: dt[0] = -math.log(1.0 - random.random())/RAB if RCD > 0.0: dt[1] = -math.log(1.0 - random.random())/RCD if RDC > 0.0: dt[2] = -math.log(1.0 - random.random())/RDC interval = 1e36 transition = -1 for n in range(len(dt)): if dt[n] > 0.0 and dt[n] < interval: interval = dt[n] transition = n return transition, interval if __name__ == '__main__': sim()

  Read the article

• Initialization problem

  - by zp26

  I have a problem. This is my code. When i try to use the IBAction SavePosition the "arrayPosition" isn't update. Else if i initialize the "arrayPosition" in "SavePosition" the value is stored in the array. Why this anomaly? #import <UIKit/UIKit.h> @interface AccelerometroViewController : UIViewController <UIAccelerometerDelegate, UITextFieldDelegate, UIAlertViewDelegate>{ //..... NSMutableArray *arrayPosizioni; NSMutableArray *arrayPosizioniCorrenti; NSString *nomePosizioneCorrente; } -(IBAction)salvaPosizione; //... @property (nonatomic, assign) NSMutableArray *arrayPosizioni; @property (nonatomic, assign) NSMutableArray *arrayPosizioniCorrenti; @property (nonatomic, assign) NSString *nomePosizioneCorrente; @end #import "AccelerometroViewController.h" #import "Position.h" @implementation AccelerometroViewController float actualX; float actualY; float actualZ; @synthesize arrayPosition; @synthesize arrayCurrentPosition; @synthesize nameCurrentPosition; -(id)init { self = [super init]; if (self != nil) { arrayPosition = [[NSMutableArray alloc]init]; arrayCurrentPosition = [[NSMutableArray alloc]init]; nameCurrentPosition = [NSString stringWithFormat:@"noPosition"]; actualX = 0; actualY = 0; actualZ = 0; } return self; } -(void)updateTextView:(NSString*)nomePosizione { NSString *string = [NSString stringWithFormat:@"%@", nameCurrentPosition]; textEvent.text = [textEvent.text stringByAppendingString:@"\n"]; textEvent.text = [textEvent.text stringByAppendingString:string]; } -(IBAction)savePosition{ Posizione *newPosition; newPosition = [[Position alloc]init]; if([newPosition setValue:(NSString*)fieldNomePosizione.text:(float)actualX:(float)actualY:(float)actualZ]){ //setValue is a method of Position. I'm sure that this method is correct UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Salvataggio Posizione" message:@"Posizione salvata con successo" delegate:self cancelButtonTitle:@"Cancel" otherButtonTitles:nil]; [alert show]; [alert release]; [arrayPosition addObject:newPosition]; } else{ UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Salvataggio osizione" message:@"Errore nel salvataggio" delegate:self cancelButtonTitle:@"Cancel" otherButtonTitles:nil]; [alert show]; [alert release]; } }

  Read the article

• iPhone: Grouped tables and navigation controller issues

  - by Jack Griffiths

  Hi there, I've set up a grouped table on my app, and pushing to new views works fine. Except for one thing. The titles and stack layout are all weird. Here's the breakdown: I have two sections in my table. When I tap on the first row in the first section, it takes me to the correct view, but the title of the new view is the name of the first row in the second section of the table. In turn, the second row in the first section's title is the second row in the second section's title. If I tap on the second row in the second section of the root view table, the navigation button goes to the second row in the first section of the table. So here's a diagram of my table: Table Section 1 Row 1 Row 2 Row 3 Table Section 2 Row A Row B Row C So if I tap on row 3, the title of the pushed view is Row C. The navigation button tells me to go back to Row 3, then eventually ending up at the root view. Here's my implementation file pushing the views: - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { //CSS if ([[arryClientSide objectAtIndex:indexPath.row] isEqual:@"CSS"]) { CSSViewController *css = [[CSSViewController alloc] initWithNibName:@"CSSViewController" bundle:nil]; [css setTitle:@"CSS"]; [self.navigationController pushViewController:css animated:YES]; } //HTML if ([[arryClientSide objectAtIndex:indexPath.row] isEqual:@"HTML"]) { HTMLViewController *html = [[HTMLViewController alloc] initWithNibName:@"HTMLViewController" bundle:nil]; [html setTitle:@"HTML"]; [self.navigationController pushViewController:html animated:YES]; } //JS if ([[arryClientSide objectAtIndex:indexPath.row] isEqual:@"JavaScript"]) { JSViewController *js = [[JSViewController alloc] initWithNibName:@"JSViewController" bundle:nil]; [js setTitle:@"JavaScript"]; [self.navigationController pushViewController:js animated:YES]; } //PHP if ([[arryServerSide objectAtIndex:indexPath.row] isEqual:@"PHP"]) { PHPViewController *php = [[PHPViewController alloc] initWithNibName:@"PHPViewController" bundle:nil]; [php setTitle:@"PHP"]; [self.navigationController pushViewController:php animated:YES]; } //SQL if ([[arryServerSide objectAtIndex:indexPath.row] isEqual:@"SQL"]) { SQLViewController *sql = [[SQLViewController alloc] initWithNibName:@"SQLViewController" bundle:nil]; [sql setTitle:@"SQL"]; [self.navigationController pushViewController:sql animated:YES]; } & the array feeding the table's data: - (void)viewDidLoad { [super viewDidLoad]; arryClientSide = [[NSArray alloc] initWithObjects:@"CSS",@"HTML",@"JavaScript",nil]; arryServerSide = [[NSArray alloc] initWithObjects:@"Objective-C", @"PHP",@"SQL",nil]; // arryResources = [[NSArray alloc] initWithObjects:@"HTML Colour Codes", @"Useful Resources", @"About",nil]; self.title = @"Select a Language"; [super viewDidLoad]; // Uncomment the following line to display an Edit button in the navigation bar for this view controller. // self.navigationItem.rightBarButtonItem = self.editButtonItem; } Any help would be greatly appreciated. Jack

  Read the article

• Changing backgroundcolor in listview (expandable listview)

  - by Stofke

  I'm trying to dynamically change a backgroundcolor in a part of a listview, I have on example that works fine in a listview when I try to replicate it in another part with an expandable listview it fails This piece of code works and displays a different color if a student is online or not ... map.put(KEY_FIRSTNAME, temp.firstName); map.put(KEY_NAME, temp.name); map.put(KEY_EMAIL, temp.email); map.put(KEY_ISONLINE, temp.isOnLine); // change image if student is online or not Log.d("demo", "is on line= " + temp.isOnLine); if (temp.isOnLine.equalsIgnoreCase("1")) { map.put(KEY_IMAGE_ISONLINE, R.color.greenColor); } else { map.put(KEY_IMAGE_ISONLINE, R.color.greyColor); } listItem.add(map); } myListView = (ListView) findViewById(R.id.listViewTabLeerlingen); SimpleAdapter adapter = new SimpleAdapter(StudentTab.this, listItem, R.layout.list_item_student, new String[] { KEY_FIRSTNAME, KEY_NAME, KEY_IMAGE_ISONLINE }, new int[] { R.id.firstNameTextView, R.id.lastNameTextView, R.id.logo }); myListView.setAdapter(adapter); the xml that goes along with it <ImageView android:id="@+id/logo" android:layout_width="85dp" android:layout_height="match_parent" android:background="@color/greenColor" android:contentDescription="Image if student is online or not" android:src="@drawable/transparent_pixel" /> The above works fine however the following code (just part of the code) ... ArrayList<Map<String, Object>> children = new ArrayList<Map<String, Object>>(); for (int i = 0; i < _data.length(); i++) { try { JSONArray tmp = _data.getJSONArray(i); HashMap<String, Object> map = new HashMap<String, Object>(); // change image if student is online or not if (tmp.getString(3).equalsIgnoreCase("0")) { map.put(KEY_POINTS,R.color.redColor); }else{ map.put(KEY_POINTS,R.color.greenColor); } map.put(KEY_QUESTIONTEXT, tmp.getString(1)); map.put(KEY_ANSWER, tmp.getString(2)); children.add(map); } catch (JSONException e) { e.printStackTrace(); } childData.add(children); ... ... ArrayList<ArrayList<Map<String, Object>>> childData) { SimpleExpandableListAdapter listAdapter = new SimpleExpandableListAdapter( this, groupData, R.layout.list_item_results_students, new String[] { KEY_FIRSTNAME, KEY_NAME, KEY_ISJUIST }, new int[] { R.id.firstnameResults, R.id.nameResults, R.id.resultsTextView }, childData, R.layout.list_item_results_results, new String[] { KEY_QUESTIONTEXT, KEY_ANSWER, KEY_POINTS }, new int[] { R.id.questionTextView, R.id.answerTextTextView, R.id.score }); ExpandableListView myListView = (ExpandableListView) findViewById(R.id.listViewTabResultaten); myListView.setAdapter(listAdapter); with xml: <ImageView android:id="@+id/score" android:layout_width="16dp" android:layout_height="match_parent" android:background="@color/greenColor" android:contentDescription="Image if student has correct answer" android:src="@drawable/transparent_pixel" /> I will get this error: 06-09 10:35:21.490: E/AndroidRuntime(4406): java.lang.ClassCastException: android.widget.ImageView cannot be cast to android.widget.TextView

  Read the article

• Implementing Skip List in C++

  - by trikker

  [SOLVED] So I decided to try and create a sorted doubly linked skip list... I'm pretty sure I have a good grasp of how it works. When you insert x the program searches the base list for the appropriate place to put x (since it is sorted), (conceptually) flips a coin, and if the "coin" lands on a then that element is added to the list above it(or a new list is created with element in it), linked to the element below it, and the coin is flipped again, etc. If the "coin" lands on b at anytime then the insertion is over. You must also have a -infinite stored in every list as the starting point so that it isn't possible to insert a value that is less than the starting point (meaning that it could never be found.) To search for x, you start at the "top-left" (highest list lowest value) and "move right" to the next element. If the value is less than x than you continue to the next element, etc. until you have "gone too far" and the value is greater than x. In this case you go back to the last element and move down a level, continuing this chain until you either find x or x is never found. To delete x you simply search x and delete it every time it comes up in the lists. For now, I'm simply going to make a skip list that stores numbers. I don't think there is anything in the STL that can assist me, so I will need to create a class List that holds an integer value and has member functions, search, delete, and insert. The problem I'm having is dealing with links. I'm pretty sure I could create a class to handle the "horizontal" links with a pointer to the previous element and the element in front, but I'm not sure how to deal with the "vertical" links (point to corresponding element in other list?) If any of my logic is flawed please tell me, but my main questions are: How to deal with vertical links and whether my link idea is correct Now that I read my class List idea I'm thinking that a List should hold a vector of integers rather than a single integer. In fact I'm pretty positive, but would just like some validation. I'm assuming the coin flip would simply call int function where rand()%2 returns a value of 0 or 1 and if it's 0 then a the value "levels up" and if it's 0 then the insert is over. Is this incorrect? How to store a value similar to -infinite? Edit: I've started writing some code and am considering how to handle the List constructor....I'm guessing that on its construction, the "-infinite" value should be stored in the vectorname[0] element and I can just call insert on it after its creation to put the x in the appropriate place.

  Read the article

• Problem on a Floyd-Warshall implementation using c++

  - by Henrique

  I've got a assignment for my college, already implemented Dijkstra and Bellman-Ford sucessfully, but i'm on trouble on this one. Everything looks fine, but it's not giving me the correct answer. Here's the code: void FloydWarshall() { //Also assume that n is the number of vertices and edgeCost(i,i) = 0 int path[500][500]; /* A 2-dimensional matrix. At each step in the algorithm, path[i][j] is the shortest path from i to j using intermediate vertices (1..k-1). Each path[i][j] is initialized to edgeCost(i,j) or infinity if there is no edge between i and j. */ for(int i = 0 ; i <= nvertices ; i++) for(int j = 0 ; j <= nvertices ; j++) path[i][j] = INFINITY; for(int j = 0 ; j < narestas ; j++) //narestas = number of edges { path[arestas[j]->v1][arestas[j]->v2] = arestas[j]->peso; //peso = weight of the edge (aresta = edge) path[arestas[j]->v2][arestas[j]->v1] = arestas[j]->peso; } for(int i = 0 ; i <= nvertices ; i++) //path(i, i) = 0 path[i][i] = 0; //test print, it's working fine //printf("\n\n\nResultado FloydWarshall:\n"); //for(int i = 1 ; i <= nvertices ; i++) // printf("distancia ao vertice %d: %d\n", i, path[1][i]); //heres the problem, it messes up, and even a edge who costs 4, and the minimum is 4, it prints 2. //for k = 1 to n for(int k = 1 ; k <= nvertices ; k++) //for i = 1 to n for(int i = 1 ; i <= nvertices ; i++) //for j := 1 to n for(int j = 1 ; j <= nvertices ; j++) if(path[i][j] > path[i][k] + path[k][j]) path[i][j] = path[i][k] + path[k][j]; printf("\n\n\nResultado FloydWarshall:\n"); for(int i = 1 ; i <= nvertices ; i++) printf("distancia ao vertice %d: %d\n", i, path[1][i]); } im using this graph example i've made: 6 7 1 2 4 1 5 1 2 3 1 2 5 2 5 6 3 6 4 6 3 4 2 means we have 6 vertices (1 to 6), and 7 edges (1,2) with weight 4... etc.. If anyone need more info, i'm up to giving it, just tired of looking at this code and not finding an error.

  Read the article

• Setting up a "to-many" relationship value dependency for a transient Core Data attribute

  - by Greg Combs

  I've got a relatively complicated Core Data relationship structure and I'm trying to figure out how to set up value dependencies (or observations) across various to-many relationships. Let me start out with some basic info. I've got a classroom with students, assignments, and grades (students X assignments). For simplicity's sake, we don't really have to focus much on the assignments yet. StudentObj <--->> ScoreObj <<---> AssignmentObj Each ScoreObj has a to-one relation with the StudentObj and the AssignmentObj. ScoreObj has real attributes for the numerical grade, the turnInDate, and notes. AssignmentObj.scores is the set of Score objects for that assignment (N = all students). AssignmentObj has real attributes for name, dueDate, curveFunction, gradeWeight, and maxPoints. StudentObj.scores is the set of Score objects for that student (N = all assignments). StudentObj also has real attributes like name, studentID, email, etc. StudentObj has a transient (calculated, not stored) attribute called gradeTotal. This last item, gradeTotal, is the real pickle. it calculates the student's overall semester grade using the scores (ScoreObj) from all their assignments, their associated assignment gradeWeights, curves, and maxPoints, and various other things. This gradeTotal value is displayed in a table column, along with all the students and their individual assignment grades. Determining the value of gradeTotal is a relatively expensive operation, particularly with a large class, therefore I want to run it only when necessary. For simplicity's sake, I'm not storing that gradeTotal value in the core data model. I don't mind caching it somewhere, but I'm having a bitch of a time determining where and how to best update that cache. I need to run that calculation for each student whenever any value changes that affects their gradeTotal. If this were a simple to-one relationship, I know I could use something like keyPathsForValuesAffectingGradeTotal ... but it's more like a many-to-one-to-many relationship. Does anyone know of an elegant (and KVC correct) solution? I guess I could tear through all those score and assignment objects and tell them to register their students as observers. But this seems like a blunt force approach.

  Read the article

• Combobox INotifyPropertyChanged event not raised!!!

  - by nagiah

  I created a combobox and set observable collection as the itemsource and implemented INotifyPropertyChanged on the observable collection item. Even after that, when I select different item in the combobox, the OnPropertyChange method is not invoked. I think I am not making the binding properly. Could any one please correct me/ suggest me in this regard. ---------------------------------MainPage.xaml--------------------------------------------------- <StackPanel Width="300"> <ComboBox Name="cboName"></ComboBox> <TextBox Name="tbxName" Text="{Binding Path=name,Mode=TwoWay,ElementName=cboName}" ></TextBox> </StackPanel> ---------------------------MainPage.xaml.cs----------------------------------------------- using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Collections.ObjectModel; using System.Collections.Specialized; using System.ComponentModel; namespace MasterDetailsUpdate { public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); Loaded += new RoutedEventHandler(MainPage_Loaded); } void MainPage_Loaded(object sender, RoutedEventArgs e) { ObservableCollection<Person> persons = new ObservableCollection<Person>(); persons.Add(new Person { city = "c1", name = "n1" }); persons.Add(new Person { city = "c2", name = "n2" }); persons.Add(new Person { city = "c3", name = "" }); persons.Add(new Person { city = "c4", name = "" }); persons.Add(new Person { city = "c5", name = "n1" }); cboName.ItemsSource = persons; cboName.DisplayMemberPath = "name"; } } public class Person : INotifyPropertyChanged { private string _name; private string _city; public string name { set { _name = value; OnPropertyChanged("name"); } get { return _name; } } public string city { set { _city = value; OnPropertyChanged("city"); } get { return _city; } } #region INotifyPropertyChanged Members public event PropertyChangedEventHandler PropertyChanged; private void OnPropertyChanged(string propertyName) { if (PropertyChanged != null) { this.PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } #endregion } } Thank You

  Read the article

• Few doubts regarding Bitmaps , Images & `using` blocks

  - by imageWorker

  I caught up in this problem. http://stackoverflow.com/questions/2559826/garbage-collector-not-doing-its-job-memory-consumption-1-5gb-outofmemory-exc I feel that there is something wrong in my understanding. Please clarify these things. Destructor & IDisposable.Dispose are two methods for freeing resources that are not not under the control of .NET. Which means, everything except memory. right? using blocks are just better way of calling IDisposable.Dispose() method of an object. This is the main code I'm referring to. class someclass { static someMethod(Bitmap img) { Bitmap bmp = new Bitmap(img); //statement1 // some code here and return } } here is class I'm using for testing: class someotherClass { public static voide Main() { foreach (string imagePath in imagePathsArray) { using (Bitmap img1 = new Bitmap(imagePath)) { someclass.someMethod(img1); // does some more processing on `img1` } } } } Is there any memory leak with statement1? Question1: If each image size is say 10MB. Then does this bmp object occupy atleast 10MB? What I mean is, will it make completely new copy of entire image? or just refer to it? Question2:should I or should I not put the statement1 in using block? My Argument: We should not. Because using is not for freeing memory but for freeing the resources (file handle in this case). If I use it in using block. It closes file handle here encapsulated by this bmp object. It means we are also closing filehandle for the caller's img1 object. Which is not correct? As of the memory leak. No there is no scope of memory leak here. Because reference bmp is destroyed when this method is returned. Which leaves memory it refered without any pointer. So, its garbage collected. Am I right? Edit: class someclass { static Bitmap someMethod(Bitmap img) { Bitmap bmp = new Bitmap(img); //can I use `using` block on this enclosing `return bmp`; ??? // do some processing on bmp here return bmp; } }

  Read the article

• Help with manipulating child/parent elements with jQuery

  - by Mohammad

  Currently I have this JQuery script var img = $(this); img.wrap('<div class="photo"></div>'); img.parent().append("<p>" + img.attr("alt") + "</p>"); which successfully turns the following: <img src="photo.jpg" alt="caption"> into this <div class="photo"> <img src="photos.jpg" alt="caption"/> <p>caption</p> </div> All is well unless the image has a link as a parent; <a href="#"><img since I want it to be correct html (I'm fussy) improving the resulting outcome bellow would be satisfactory <a href="#"> <div class="photo"> <img src="photos.jpg" alt="caption"/> <p>caption</p> </div> </a> to this: <div class="photo"> <a href="#"> <img src="photos.jpg" alt="caption"/> </a> <p><a href="#">caption</a></p> </div> </a> This is my jQuery script so far (which doesn't work bc I'm a noob) aha if(img.parent('a')){ var targetLink = img.parent('a').attr('href').val(); img.parent('a').wrap('<div class="photo"></div>'); img.parent('div').append('<p><a href="'+targetLink+'">' + img.attr("alt") + '</p></a>'); }else{ img.wrap('<div class="photo"></div>'); img.parent().append("<p>" + img.attr("alt") + "</p>"); }; Any advice, or help will be greatly appreciated : ) Thank You! Update *Answer* (works but looks sloppy) I'm editing it atm; if(img.parent('a').length){ var targetLink = img.parent().attr('href'); img.parent().wrap('<div class="photo"></div>'); var divTarget = img.parent('a').parent('div'); divTarget.append('<p><a href="'+targetLink+'">' + img.attr("alt") + '</p></a>'); }else{ img.wrap('<div class="photo"></div>'); img.parent().append("<p>" + img.attr("alt") + "</p>"); };

  Read the article

• Ruby: Parse, replace, and evaluate a string formula

  - by Swartz

  I'm creating a simple Ruby on Rails survey application for a friend's psychological survey project. So we have surveys, each survey has a bunch of questions, and each question has one of the options participants can choose from. Nothing exciting. One of the interesting aspects is that each answer option has a score value associated with it. And so for each survey a total score needs to be calculated based on these values. Now my idea is instead of hard-coding calculations is to allow user add a formula by which the total survey score will be calculated. Example formulas: "Q1 + Q2 + Q3" "(Q1 + Q2 + Q3) / 3" "(10 - Q1) + Q2 + (Q3 * 2)" So just basic math (with some extra parenthesis for clarity). The idea is to keep the formulas very simple such that anyone with basic math can enter them without resolving to some fancy syntax. My idea is to take any given formula and replace placeholders such as Q1, Q2, etc with the score values based on what the participant chooses. And then eval() the newly formed string. Something like this: f = "(Q1 + Q2 + Q3) / 2" # some crazy formula for this survey values = {:Q1 => 1, :Q2 => 2, :Q3 => 2} # values for substitution result = f.gsub(/(Q\d+)/) {|m| values[$1.to_sym] } # string to be eval()-ed eval(result) So my questions are: Is there a better way to do this? I'm open to any suggestions. How to handle formulas where not all placeholders were successfully replaced (e.g. one question wasn't answered)? Ex: {:Q3 = 2} wasn't in values hash? My idea is to rescue eval()... any thoughts? How to get proper result? Should be 2.5, but due to integer arithmetic, it will truncate to 2. I can't expect people who provide the correct formula (e.g. / 2.0 ) to understand this nuance. I do not expect this, but how to best protect eval() from abuse (e.g. bad formula, manipulated values coming in)? Thank you!

  Read the article

• Contact form problem - I do receive messages, but no contents (blank page).

  - by nitbuntu

  I have a contact form on site which used to work, but since last few months has stopped working properly. This could have been due to some coding error that I can't figure out. What happens is that I receive the messages sent, but they are completely blank, with no contents at all. What could be the problems? I'm attaching first the front-end page, and then the back-end. Sample of contact.php the front-end code:- <div id="content"> <h2 class="newitemsxl">Contact Us</h2> <div id="contactcontent"> <form method="post" action="contactus.php"> Name:<br /> <input type="text" name="Name" /><br /> Email:<br /> <input type="text" name="replyemail" /><br /> Your message:<br /> <textarea name="comments" cols="40" rows="4"></textarea><br /><br /> <?php require("ClassMathGuard.php"); MathGuard::insertQuestion(); ?><br /> <input type="submit" name="submit" value="Send" /> * Refresh browser for a different question. :-) </form> </div> </div> Sample of contactus.php (backend code):- <?php /* first we need to require our MathGuard class */ require ("ClassMathGuard.php"); /* this condition checks the user input. Don't change the condition, just the body within the curly braces */ if (MathGuard :: checkResult($_REQUEST['mathguard_answer'], $_REQUEST['mathguard_code'])) { $mailto="[email protected]"; $pcount=0; $gcount=0; $subject = "A Stylish Goods Enquiry"; $from="[email protected]"; echo ("Great, you're message has been sent !"); //insert your code that will be executed when user enters the correct answer } else { echo ("Sorry, wrong answer, please go back and try again !"); //insert your code which tells the user he is spamming your website } while (list($key,$val)=each($HTTP_POST_VARS)) { $pstr = $pstr."$key : $val \n "; ++$pcount; } while (list($key,$val)=each($HTTP_GET_VARS)) { $gstr = $gstr."$key : $val \n "; ++$gcount; } if ($pcount > $gcount) { $comments=$pstr; mail($mailto,$subject,$comments,"From:".$from); } else { $comments=$gstr; mail($mailto,$subject,$comments,"From:".$from); } ?>

  Read the article

• How to replace all id attributes of a child collection of complex types using jQuery in ASP.net MVC

  - by TJB

  Here's my situation: I'm writing an ASP.net MVC 1 website and I have a create/edit form that uses the default model binding to parse the form into a strongly typed complex object. The object I'm posting has a child collection of another complex type and the way I format my id's for the model binder is as follows: <div class="childContainer" > <!-- There's one of these for each property for each child collection item --> <%= Html.TextBox("ChildCollectionName[0].ChildPropertyName", /* blah blah */ ) %> <%= Html.TextBox("ChildCollectionName[0].OtherChildPropertyName", /* blah blah */ ) %> <!-- ... --> </div> This gets rendered as <div class="childContainer" > <input id="ChildCollectionName[0]_ChildPropertyName" ... /> <input id="ChildCollectionName[0]_OtherChildPropertyName" ... /> ... </div> <div class="childContainer" > <input id="ChildCollectionName[1]_ChildPropertyName" ... /> <input id="ChildCollectionName[1]_OtherChildPropertyName" ... /> ... </div> For each entry in the chlid collection. This collection is dynamically created in the form using jQuery, so entries can be added, removed etc. and whenever there's an operation on the collection I need to update the indexes so that it's bound correctly on the server side. What's the best way to replace all the html input id's when I'm updating the index within the child e.g. replace all [*] -- [N] where N is the correct index. using jQuery / JavaScript ? I have something coded now, but its buggy and I think there is a simpler solution. Also, if you have an easier way to identify the child collection I'll take any advice on that as well. Thanx!

  Read the article

• Just a small problem regarding javscript BOM question

  - by caramel1991

  The question is this: Create a page with a number of links. Then write code that fires on the window onload event, displaying the href of each of the links on the page. And this is my solution <html> <body language="Javascript" onload="displayLink()"> <a href="http://www.google.com/">First link</a> <a href="http://www.yahoo.com/">Second link</a> <a href="http://www.msn.com/">Third link</a> <script type="text/javascript" language="Javascript"> function displayLink() { for(var i = 0;document.links[i];i++) { alert(document.links[i].href); } } </script> </body> </html> This is the answer provided by the book <html> <head> <script language=”JavaScript” type=”text/javascript”> function displayLinks() { var linksCounter; for (linksCounter = 0; linksCounter < document.links.length; linksCounter++) { alert(document.links[linksCounter].href); } } </script> </head> <body onload=”displayLinks()”> <A href=”link0.htm” >Link 0</A> <A href=”link1.htm”>Link 2</A> <A href=”link2.htm”>Link 2</A> </body> </html> Before I get into the javascript tutorial on how to check user browser version or model,I was using the same method as the example,by acessing the length property of the links array for the loop,but after I read through the tutorial,I find out that I can also use this alternative ways,by using the method that the test condition will evalute to true only if the document.links[i] return a valid value,so does my code is written using the valid method??If it's not,any comment regarding how to write a better code??Correct me if I'm wrong,I heard some of the people say "a good code is not evaluate solely on whether it works or not,but in terms of speed,the ability to comprehend the code,and could posssibly let others to understand the code easily".Is is true??

  Read the article

• Implementing a scalable and high-performing web app

  - by Christopher McCann

  I have asked a few questions on here before about various things relating to this but this is more of a consolidation question as I would like to check I have got the gist of everything. I am in the middle of developing a social media web app and although I have a lot of experience coding in Java and in PHP I am trying things a bit different this time. I have modularised each component of the application. So for example one component of the application allows users to private message each other and I have split this off into its own private messaging service. I have also created a user data service the purpose of which is to return data about the user for example their name, address, age etc etc from the database. Their is also another service, the friends service, which will work off the neo4j database to create a social graph. My reason for doing all this is to allow me up to update seperate modules when I need to - so while they mostly all run off MySQL right now I could move one to Cassandra later if I thought it approriate. The actual code of the web app is really just used for the final construction. The modules behind it dont really follow any strict REST or SOAP protocol. Basically each method on our API is turned into a PHP procedural script. This then may make calls to other back-end code which tends to be OO. The web app makes CURL requests to these pages and POSTs data to them or GETs data from them. These pages then return JSON where data is required. I'm still a little mixed up about how I actually identify which user is logged in at that moment. Do I just use sessions for that? Like if we called the get-messages.php script which equates to the getMessages() method for that user - returning all the private messages for that user - how would the back-end code know which user it is as posting the users ID to the script would not be secure. Anyone could do that and get all the messages. So I thought I would use sessions for it. Am I correct on this? Can anyone spot any other problems with what I am doing here? Thanks

  Read the article

• Dynamically find other hosts in a LAN in Java

  - by Federico Cristina

  A while ago I developed a little LAN chat app. in Java which allows chatting with other hosts, send images, etc. Although it was created just for fun, now it's being used where I work. Currently, there is no "chat server" on the app. where each client registers, updates it's status, etc. (I liked the idea of symmetric design and not depending on a server running on some other machine). Instead, each host is a client/server which has a hosts.properties file with the hostname of the other hosts, and - for instance - broadcasts to each one of them when sending a massive message/image/whatever. In the beginning there were just a couple of hosts, so this hosts.properties file wasn't an issue. But as the amount of users increased, the need of updating that file was a bit daunting. So now I've decided to get rid of it, and each time the app. starts, dynammically find the other active hosts. However, I cannot find the correct way of implement this. I've tried starting different threads, each one of them searching for other hosts in a known range of IP addresses. Something like this (simplified for the sake of readability): /** HostsLocator */ public static void searchForHosts(boolean waitToEnd) { for (int i=0; i < MAX_IP; i+= MAX_IP / threads) { HostsLocator detector = new HostsLocator(i, i+(MAX_IP / threads - 1)); // range: from - to new Thread(detector).start(); } } public void run() { for (int i=from; i<=to; i++) findHosts( maskAddress + Integer.toString(i) ); } public static boolean findHosts(String IP) { InetAddress address = InetAddress.getByName(IP); if ( address.isReachable(CONNECTION_TIME_OUT) ) // host found! } However: With a single thread and a low value in CONNECTION_TIME_OUT (500ms) I get wrong Host Not Found status for for hosts actually active. With a high value in CONNECTION_TIME_OUT (5000ms) and only one single thread takes forever to end With several threads I've also found problems similar like the first one, due to collisions. So... I guess there's a better way of solving this problem but I couldn't find it. Any advice? Thanks!

  Read the article

• Why my json_encode get corrupted

  - by Cullen SUN

  $model = new XUploadForm; $model->file = CUploadedFile::getInstance( $model, 'file' ); //We check that the file was successfully uploaded if( $model->file !== null ) { //Grab some data $model->mime_type = $model->file->getType( ); $model->size = $model->file->getSize( ); $model->name = $model->file->getName( ); $file_extention = $model->file->getExtensionName( ); //(optional) Generate a random name for our file $file_tem_name = md5(Yii::app( )->user->id.microtime( ).$model->name); $file_thumb_name = $file_tem_name.'_thumb.'.$file_extention; $file_image_name = $file_tem_name.".".$file_extention; if( $model->validate( ) ) { //Move our file to our temporary dir $model->file->saveAs( $path.$file_image_name ); if(chmod($path.$file_image_name, 0777 )){ // Yii::import("ext.EPhpThumb.EPhpThumb"); // $thumb_=new EPhpThumb(); // $thumb_->init(); // $thumb_->create($path.$file_image_name) // ->resize(110,80) // ->save($path.$file_thumb_name); } //here you can also generate the image versions you need //using something like PHPThumb //Now we need to save this path to the user's session if( Yii::app( )->user->hasState( 'images' ) ) { $userImages = Yii::app( )->user->getState( 'images' ); } else { $userImages = array(); } $userImages[] = array( "filename" => $file_image_name, 'size' => $model->size, 'mime' => $model->mime_type, "path" => $path.$file_image_name, // "thumb" => $path.$file_thumb_name, ); Yii::app( )->user->setState('images', $userImages); //Now we need to tell our widget that the upload was succesfull //We do so, using the json structure defined in // https://github.com/blueimp/jQuery-File-Upload/wiki/Setup echo json_encode( array( array( "type" => $model->mime_type, "size" => $model->size, "url" => $publicPath.$file_image_name, //"thumbnail_url" => $publicPath.$file_thumb_name, //"thumbnail_url" => $publicPath."thumbs/$filename", "delete_url" => $this->createUrl( "upload", array( "_method" => "delete", "file" => $file_image_name ) ), "delete_type" => "POST" ) ) ); Above code give me correct response, [{"type":"image/jpeg","size":2266,"url":"/uploads/tmp/0b00cbaee07c6410241428c74aae1dca.jpeg","delete_url":"/api/imageUpload/upload?_method=delete&file=0b00cbaee07c6410241428c74aae1dca.jpeg","delete_type":"POST"}] but if I uncomment the following // Yii::import("ext.EPhpThumb.EPhpThumb"); // $thumb_=new EPhpThumb(); // $thumb_->init(); // $thumb_->create($path.$file_image_name) // ->resize(110,80) // ->save($path.$file_thumb_name); it gave me corrupted response: Mac OS X 2??ATTR?dA??Y?Ycom.apple.quarantine0001;50655994;Google\x20Chrome.app;2599ECF9-69C5-4386-B3D9-9F5CC7E0EE1D|com.google.ChromeThis resource fork intentionally left blank ??[{"type":"image/jpeg","size":1941,"url":"/uploads/tmp/409c5921c6d20944e1a81f32b12fc380.jpeg","delete_url":"/api/imageUpload/upload?_method=delete&file=409c5921c6d20944e1a81f32b12fc380.jpeg","delete_type":"POST"}]

  Read the article

• .NET AES returns wrong Test Vectors

  - by ralu

  I need to implement some crypto protocol on C# and want to say that this is my first project in C#. After spending some time to get used on C# I found out that I am unable to get compliant AES vectors. using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Security.Cryptography; using System.IO; namespace ConsoleApplication1 { class Program { public static void Main() { try { //test vectors from "ecb_vk.txt" byte[] key = { 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; byte[] data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; byte[] encTest = { 0x0e, 0xdd, 0x33, 0xd3, 0xc6, 0x21, 0xe5, 0x46, 0x45, 0x5b, 0xd8, 0xba, 0x14, 0x18, 0xbe, 0xc8 }; AesManaged aesAlg = new AesManaged(); aesAlg.BlockSize = 128; aesAlg.Key = key; aesAlg.Mode = CipherMode.ECB; ICryptoTransform encryptor = aesAlg.CreateEncryptor(); MemoryStream msEncrypt = new MemoryStream(); CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write); StreamWriter swEncrypt = new StreamWriter(csEncrypt); swEncrypt.Write(data); swEncrypt.Close(); csEncrypt.Close(); msEncrypt.Close(); aesAlg.Clear(); byte[] encr; encr = msEncrypt.ToArray(); string datastr = BitConverter.ToString(data); string encrstr = BitConverter.ToString(encr); string encTestStr = BitConverter.ToString(encTest); Console.WriteLine("data: {0}", datastr); Console.WriteLine("encr: {0}", encrstr); Console.WriteLine("should: {0}", encTestStr); Console.ReadKey(); } catch (Exception e) { Console.WriteLine("Error: {0}", e.Message); } } } } Output is wrong: data: 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 encr: A0-3C-C2-22-A4-32-F7-C9-BA-36-AE-73-66-BD-BB-A3 should: 0E-DD-33-D3-C6-21-E5-46-45-5B-D8-BA-14-18-BE-C8 I am sure that there is a correct AES implementation in .NET, so I need some advice from a .NET wizard to help with this.

  Read the article

• youtube - video upload failure - unable to convert file - encoding the video wrong?

  - by Anthony

  I am using .NET to create a video uploading application. Although it's communicating with YouTube and uploading the file, the processing of that file fails. YouTube gives me the error message, "Upload failed (unable to convert video file)." This supposedly means that "your video is in a format that our converters don't recognize..." I have made attempts with two different videos, both of which upload and process fine when I do it manually. So I suspect that my code is a.) not encoding the video properly and/or b.) not sending my API request properly. Below is how I am constructing my API PUT request and encoding the video: Any suggestions on what the error could be would be appreciated. Thanks P.S. I'm not using the client library because my application will use the resumable upload feature. Thus, I am manually constructing my API requests. Documentation: http://code.google.com/intl/ja/apis/youtube/2.0/developers_guide_protocol_resumable_uploads.html#Uploading_the_Video_File Code: // new PUT request for sending video WebRequest putRequest = WebRequest.Create(uploadURL); // set properties putRequest.Method = "PUT"; putRequest.ContentType = getMIME(file); //the MIME type of the uploaded video file //encode video byte[] videoInBytes = encodeVideo(file); public static byte[] encodeVideo(string video) { try { byte[] fileInBytes = File.ReadAllBytes(video); Console.WriteLine("\nSize of byte array containing " + video + ": " + fileInBytes.Length); return fileInBytes; } catch (Exception e) { Console.WriteLine("\nException: " + e.Message + "\nReturning an empty byte array"); byte [] empty = new byte[0]; return empty; } }//encodeVideo //encode custom headers in a byte array byte[] PUTbytes = encode(putRequest.Headers.ToString()); public static byte[] encode(string headers) { ASCIIEncoding encoding = new ASCIIEncoding(); byte[] bytes = encoding.GetBytes(headers); return bytes; }//encode //entire request contains headers + binary video data putRequest.ContentLength = PUTbytes.Length + videoInBytes.Length; //send request - correct? sendRequest(putRequest, PUTbytes); sendRequest(putRequest, videoInBytes); public static void sendRequest(WebRequest request, byte[] encoding) { Stream stream = request.GetRequestStream(); // The GetRequestStream method returns a stream to use to send data for the HttpWebRequest. try { stream.Write(encoding, 0, encoding.Length); } catch (Exception e) { Console.WriteLine("\nException writing stream: " + e.Message); } }//sendRequest

  Read the article

• How to tag photos in facebook-api?

  - by Camillo

  Hey, I wanted to ask if/how is it possible to tag a photo using the FB API (Graph or REST). I've managed to create an album and also to upload a photo in it, but I stuck on tagging. I've got the permissions and the correct session key. My code until now: try { $uid = $facebook->getUser(); $me = $facebook->api('/me'); $token = $session['access_token'];//here I get the token from the $session array $album_id = $album[0]; //upload photo $file= 'images/hand.jpg'; $args = array( 'message' => 'Photo from application', ); $args[basename($file)] = '@' . realpath($file); $ch = curl_init(); $url = 'https://graph.facebook.com/'.$album_id.'/photos?access_token='.$token; curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_POSTFIELDS, $args); $data = curl_exec($ch); //returns the id of the photo you just uploaded print_r(json_decode($data,true)); $search = array('{"id":', "}"); $delete = array("", ""); // picture id call with $picture $picture = str_replace($search, $delete, $data); //here should be the photos.addTag, but i don't know how to solve this //above code works, below i don't know what is the error / what's missing $json = 'https://api.facebook.com/method/photos.addTag?pid='.urlencode($picture).'&tag_text=Test&x=50&y=50&access_token='.urlencode($token); $ch = curl_init(); $url = $json; curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_HEADER, false); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_POST, true); curl_exec($ch); } catch(FacebookApiException $e){ echo "Error:" . print_r($e, true); } I really searched a long time, if you know something that might help me, please post it here :) Thanks for all your help, Camillo

  Read the article

< Previous Page | 650 651 652 653 654 655 656 657 658 659 660 661  | Next Page >