Search Results

Search found 14157 results on 567 pages for 'drive failure'.

Page 68/567 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• How to boot floppy image without floppy drive?

  - by Teddy

  Suppose I have a 1.44 MB floppy image with, say, a BIOS update, and a server with no floppy drive. How do I boot this image on the server? Without getting a USB floppy drive, that is. I tried copying the image to a USB drive (raw copy using dd), but it didn't boot, it just said "No kernel" and contiued booting on the HD.

  Read the article

• Simple copy to pen-drive - 0x80070057

  - by yzraeu

  Hello guys, I have this problem for a while and still didn't find the answer. I'm copying a specifc 10mb file to my pen-drive, from any folder on PC to any folder on the pen-drive and all i get is this: 0x80070057 The parameter is incorrect I simply cannot copy the file at all!! The pen-drive in case is my Nokia 5800, in "Mass Storage" mode. Sometimes I cannot copy a single MP3 file, 5 or 7mb. So i have to disconnect and connect again. The source file is not corrupted, the destination works fine with other files. It's just with some files. If I change to another pen-drive, works fine.

  Read the article

• HP Colour LaserJet Printer Hard Drive

  - by Jon Rhoades

  We are struggling to print Student's Theses on our HP CLJ CP4025 Printers (It will only let us print 1 at a time & typically they need multiple copies). Supposedly the solution is to install the optional Hard Drive. My question is: a) Does a hard drive on the printer make a significant difference? b) Can we use any old hard drive or do we have to use the rather pricey HP High performance EIO units?

  Read the article

• windows 7 backup failure insufficiant disk space

  - by Perry

  Windows 7 backup fails and gives me the message that there is insufficient disk space. I have over 2oo gigs of free space on one drive and 900 on the other.

  Read the article

• Cyrus: authentication failure: checkpass failed

  - by Nick

  I'm trying to get Cyrus IMAP (v 2.2 on Ubuntu 9.04) setup and working, but I'm having a bit of trouble getting the login working correctly. I've created a mailbox for my test user "nrahl": cm user/nrahl and then created a password: $ saslpasswd2 nrahl I'm attempting to connect to the mailbox using Thunderbird. I'm using the machine's LAN IP address as the host, and "nrahl" as the username. It connects to the server and prompts me for the password. When I enter it, I get "Login to server failed." in Thunderbird, and /var/log/mail.log shows: Apr 15 19:20:01 IMAP cyrus/imap[1930]: accepted connection Apr 15 19:20:09 IMAP cyrus/imap[1930]: badlogin: [192.168.5.21] plaintext nrahl SASL(-13): authentication failure: checkpass failed Part of /etc/imapd.conf with comments removed: sieveusehomedir: false sievedir: /var/spool/sieve #mailnotifier: zephyr #sievenotifier: zephyr #dracinterval: 0 #drachost: localhost hashimapspool: true allowplaintext: yes sasl_mech_list: PLAIN #allowapop: no #sasl_maximum_layer: 256 #loginrealms: example.com #virtdomains: userid #defaultdomain: sasl_pwcheck_method: saslauthd #sasl_auxprop_plugin: sasldb sasl_auto_transition: no

  Read the article

• Setting default working directory/drive in Emacs shell on Windows

  - by Victor K.

  Hello, how can I change a default working directory/drive for shell in Emacs (on Windows)? Normally, shell starts in the same directory as the file in current buffer. However, when my current file is on D: drive, it starts in c:. Manually changing drive to D: in shell brings me to my directory of course, but I want to avoid this extra step. Is it possible?

  Read the article

• DNS server failure when forwarding

  - by Abraham Katz

  I run Bind 9 on a Ubuntu 12.04 server. I want this server to be a sort of a "wrapper" over my default server, so that it will respond to "domain_name.My_TLD" itself and forward requests to any other request. The server resides in a domain (Disconnected from the internet), so I configured it to zone "company_domain."{ type forward; forwarders { 1.2.3.4 }; #the DC's ip }; When i query it about sommething.company_domain. it sends a query to the DC and gets a response, but it returns "server failure". What can cause that? Cheers, Abraham

  Read the article

• HP ProLiant Smart Array "lock up" code 0x11

  - by ewwhite

  I've a ProLiant DL580 G7 server that experienced a storage subsystem failure during production. The system appeared available and responded to pings, but all I/O access stalled (the system load must have been 100+). The ASR did not trigger at the specified watchdog timeout. I had to force a reboot from the ILO. During POST, I received the following error: A controller failure event occurred prior to this power-up. (Previous lock up code = 0x11) I haven't pulled the ADU report yet, but I'm curious as to what this error actually means. I was not responsible for the the installation, but can see that the firmware is very old. But if there's anything else I should know about the error, I'd like to know for the post-mortem report. edit - I should add that the server had 95 days of uptime prior to the lock up.

  Read the article

• Agent admitted failure to sign using the key.

  - by Delirium tremens

  .ssh dir is chmodded 700, id_rsa.pub 600, id_rsa 400. I ran ssh-keygen -t rsa, imported key to launchpad and ran bzr branch lp:unity, but got error message: Agent admitted failure to sign using the key. Permission denied (publickey). bzr: ERROR: Connection closed: Unexpected end of message. Please check connectivity and permissions, and report a bug if problems persist. auth.log: Nov 28 20:23:13 ubuntu sudo: deltrem : TTY=pts/0 ; PWD=/home/deltrem/Documentos/repositories ; USER=root ; COMMAND=/usr/bin/bzr branch lp:unity Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session opened for user root by (uid=0) Nov 28 20:39:01 ubuntu CRON[2959]: pam_unix(cron:session): session closed for user root Nov 28 20:41:04 ubuntu gnome-screensaver-dialog: gkr-pam: unlocked login keyring

  Read the article

• installing windows XP in Samsung SENS 145 plus notebook (no CD drive)

  - by user13267

  Hi I was trying to install Windows XP in a Samsung SENS 145 plus Notebook. It does not have a cd drive and I already managed to format it and semi install Windows XP, so now it does not even boot up either. This is what I did: Since it supports USB booting, I first made a bootable USB of Windows XP (Korean version; SP2 I think, may be SP 3) using Novicorp WinToFlash enter link description here. It managed to boot up at first and I was able to format the C driveand get Windows install to start up. It took forever to copy all the files from the USB and after the first reboot, before installation started, I cancelled the reboot from windows install, went to BIOS and changed the boot device priority from USB to internal hard drive. But now on bootup it showed me a list with two options for booting windows XP (much like in the case of a multi OS system) so I assumed that I had formatted drive D by mistake and installed XP there, instead of on C drive. Anyway, I chose one of them and it continued my Windows installation. I got the blue installation screen that shows ads about Windows XP on the right frame and estimated remaining time on the left. However, after completing the process, after the first reboot, instead of showing the Windows XP logo, it says \system32\hall.dll is missing (or corrupted I'm not sure, I needed to install the Korean version of windows and I could not exactly read the error message, however it was one that I have already seen in an English version installation, and I am sure it says either missing or corrupted). The problem is, now it shows the same error again when I try to reboot it from the USB drive as well. I tried to boot a portable version of Linux I made in another USB, but the computer does not boot up from that USB, and it shows hal.dll error when I try to boot it using the WIN XP installation USB I made, as well as when I try to boot it from the hard drive, where I suppose Win XP is now semiinstalled. So now I can't get the computer to start up at all, except going to the BIOS. What else can I try to solve this? Also, would it be possible to install XP on this computer by connecting it to another one running Windows 7 ultimate, through the ethernet card? That is, network just the two computers together, then install windows XP on the notebook from the desktop running windows 7? Please help, I'm running out of ideas on this one. If Korean version of windows XP is the problem then I am willing to install English version as well. (but I need to make sure if that is the real cause of the problem)

  Read the article

• sysprep failure on Windows Server 2008

  - by dushyantp

  Before deploying a Azure VM Role, we need to perform %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown But in my case the sysprep fails with the log file %windir%\system32\sysprep\Panther\setuperr.txt saying: 2012-07-05 08:03:57, Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 31 2012-07-05 08:03:57, Error [0x0f00ae] SYSPRP WinMain:Hit failure while processing sysprep cleanup external providers; hr = 0x8007001f I do not always want to create a new image. Is there any work around? I followed the instructions in MS support here and tried: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /unattend:.\unattend.xml It did not work. Under certain circumstances, I need to tear down the VM Image from azure and re-deploy with some more changes. So sysprep has to run almost twice every week.

  Read the article

• External hard drive encryption

  - by Kragen

  I've got a complete backup of my main PC on 1.5 TB external hard drive that I carry around with my laptop so I can have access to all of my files while I'm on the move, however it has just dawned on me that if someone nicks my external hard drive they now have access to everything! Hence I'm looking for a way to encrypt my external hard drive. I'm after something that is: Secure (if I need to carry around a USB dongle to keep the key on so be it) Fast (the performance of the drive should still be reasonable) Cross-platform (I regularly use other peoples computers - Sometimes they are not windows based and might not even have internet access, however I still want to be able to access my files) Cheap (preferably free / open source!)

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• Dell PERC 5 - RAID-10 keeps rebuilding drive 2 every day

  - by raid question

  I have a Dell PowerEdge 2950 with this card: RAID bus controller [0104]: Dell PowerEdge Expandable RAID controller 5 [1028:0015] and six disks in a RAID-10. I replaced drive 2, because it didn't show up, and then it started to rebuild itself: root@backup01:~# megaraidsas-status -- Arrays informations -- -- ID | Type | Size | Status a0d0 | RAID 10 | 5587GiB | DEGRADED -- Disks informations -- ID | Model | Status | Warnings a0e8s0 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s1 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5394 a0e8s2 | ATA ST2000DM001-1E61 1863GiB | rebuild | errs: media:0 other:99 a0e8s3 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s4 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 a0e8s5 | ATA ST2000DM001-9YN1 1863GiB | online | errs: media:0 other:5393 The rebuild finishes, then the virtual drive becomes optimal, and drive 2 goes online. Then once a day, drive 2 acts like it's been removed, and the rebuild starts all over again. How do I make this once a day rebuild stop? Event Description: Removed: PD 02(e1/s2) Event Description: Removed: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: State change on VD 00/0 from OPTIMAL(3) to DEGRADED(2) Event Description: VD 00/0 is now DEGRADED1 Event Description: State change on PD 02(e1/s2) from ONLINE(18) to FAILED(11) Event Description: State change on PD 02(e1/s2) from FAILED(11) to UNCONFIGURED_BAD(1) Event Description: Background Initialization failed on VD 00/0 Event Description: Inserted: PD 02(e1/s2) Event Description: Inserted: PD 02(e1/s2) Info: enclPd=08, scsiType=0, portMap=04, sasAddr=1221000002000000,0000000000000000 Event Description: PD 02(e1/s2) is not a certified drive Event Description: State change on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from UNCONFIGURED_GOOD(0) to OFFLINE(10) from UNCONFIGURED_BAD(1) to UNCONFIGURED_GOOD(0) Event Description: Rebuild automatically started on PD 02(e1/s2) Event Description: State change on PD 02(e1/s2) from OFFLINE(10) to REBUILD(14)

  Read the article

• drive not showing in Windows setup

  - by Binu V

  Hi, I accidentally formatted my OEM drive of M DELL Inspiron. After that I could not install Windows 7 on my laptop. Because the partitions of my hard disk are not showing to select an install drive. I downloaded the RAID driver from the Dell Support website for my laptop, but the driver is showing and I loaded the driver from a pen drive. But it's still not showing the drives.

  Read the article

• Strange failure audit in 2003 R2 X64 SP2

  - by Az

  our server is running 2003 R2 X64 SP2, we keep seeing this in clusters of around 4 rapid fire. Sometimes 2 hours, sometimes around 8 hours apart with slight variations. I am also seeing the same blank username and domain in an account locked out message, I have tried disabling all scheduled tasks, if anyone has any idea please let me know! I find these processes running out of svc host: AeLookupSvc, AppMgmt, BITS, Browser, CryptSvc, dmserver, EventSystem, helpsvc, IAS, lanmanserver, lanmanworkstation, Netman, Nla, RasMan, Schedule, seclogon, SENS, SharedAccess, ShellHWDetection, winmgmt, wuauserv, WZCSVC Logon Failure: Reason: Account currently disabled User Name: Domain: Logon Type: 3 Logon Process: Authz Authentication Package: Kerberos Workstation Name: PPCLUBES_TS Caller User Name: PPCLUBES_TS$ Caller Domain: PPCLUBES Caller Logon ID: (0x0,0x3E7) Caller Process ID: 928 Transited Services: - Source Network Address: - Source Port: -

  Read the article

• Windows Server 2008 R2 and Keyboards

  - by Brian

  Hello, I have a machine with WIN server 2008 R2 installed, when the machine boots up, it says keyboard failure. The keyboard I had was from an older machine and was PS/2, I got a PS/2 to USB converter in order for it to work, but it says keyboard failure and doesn't work. Is it because it's pretty old and that's it, or does it have to be USB? I'm going to look into a new one, but want to make sure I don't get this issue again... Thanks.

  Read the article

• Windows Vista - Can Boot into Safe Mode Command Prompt, Cannot Access Flash Drive

  - by Adam

  Hey there, Got a laptop dropped into my lap. Has Vista installed. Normal boot never gets past the login screen. Safe mode will get past, but just barely. I can try and start the task manager at that point, but it never opens. Only reliable way to do anything I've got is the safe mode command prompt... Boots up and logs in fine. I can't see anything noticably wrong via regedit, but it's been a long time since I've had to fix up a Windows box... not sure that I would. Problem I'm having, is that I want to run ComboFix/etc, but have no way to get them on there... When I pop a flash drive in, it seems to mount it (flash drive flickers as normal) but it never seems to be mounted... I cannot access it through any drive letter on the command line. I managed to start the device manager (devmgmt.msc) and the flash drive was recognized and listed... Any ideas on how to get this thing going again? (Short of a reinstall.) (It has no CD drive, either, so burning files to CD would not be easy...) Thanks! Adam

  Read the article

• Cannot run setups from a vboxsvr mapped network drive on Windows 7 within VirtualBox

  - by Dimitri C.

  I'm trying to run an application setup by double-clicking the setup.exe from within Windows Explorer. The file is located on a mapped network drive, and I'm using Windows 7. This results in the following error message: The specified path does not exist. Check the path, and then try again. The workaround I found is to copy the installer to the main hard drive (c:) and run it from there; however, this is rather inconvenient. The same action did work on Windows 2000, Windows XP and Windows Vista. I have the impression that the problem only occurs with installers, as everything seemed to work fine with regular exe's. Is there anyone who can explain this odd behavior? Update: After some extended tests I noticed that the problem only occurs with a mapped drive of VirtualBox's "shared folders" (cf. vboxsvr). Mapping an SMB drive works fine.

  Read the article

• Map Network Drive with Password

  - by Lea Cohen

  I mapped a network drive to a location that needs a password. Now whenever my computer starts up, it tells me that it could not connect to that network drive because a password is needed. How do I make set my computer to remember the password for that mapped network drive? EDIT: My PC is running Windows XP Professional

  Read the article

• SATA Blu-Ray drive not detected via USB adapter

  - by LTR

  I'm using an SATA blu-ray drive (Lite-On IHOS104), connected via a USB adapter to my Windows 7 (32-bit) notebook. The first time I plugged the adapter in, it worked perfectly. The drive appeared in Explorer, and my player software was able to play an encrypted Blu-Ray disc just fine. After the first reboot, it never worked again. Now it shows up as "removable media" with a size of 0 bytes, irregardless of whether a disk is inserted or not. The drive does not show up under the green "eject USB device" icon in the taskbar. The adapter is powered using a separate power adapter. I have tried: disconnecting all other USB devices testing with a DVD instead of a Blu-Ray disc letting Windows search for updated drivers for the drive - there are none using the same drive and adapter on another Win7 (but x64) computer. They work perfectly. using other USB ports on the same notebook - tried them all. using a different SATA/USB-adapter What else can I do to diagnose this problem?

  Read the article

• Ubuntu: USB drive = /dev/sda1?

  - by lipton

  I'm trying to boot Ubuntu from my USB drive. How do I know the drive name in Ubuntu since I haven't installed Ubuntu yet? This guy is using /dev/sda1 for his USB drive. How did he figure that out?

  Read the article

• Boot Toshiba Portege M200 with no CD drive

  - by BoundforPNG

  This has not CD drive and I would like to boot to Acronis to reload from an image that I created. I don't know how else to get the OS and all the drivers loaded. It doesn't seem to have Toshiba hidden boot partion on the HD. It doesn't seem to recognize my USB external CD drive or my USB flash drive. Any ideas? Paul

  Read the article

• How to troubleshoot a service failure?

  - by AngryHacker

  I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

  Read the article

• IE8 Refuses to run Javascript from Local Hard Drive

  - by Josh Stodola

  I have a problem that just started at work recently and the network manager is certain he did not change anything with the group policy. Anyways, here is a detailed description of the problem. My machine is Windows XP SP3, and I use IE8 to browse. We have McAffee anti-virus software that I am unable to configure. I use the following file to test... <!DOCTYPE html> <html> <head> <title>Javascript Test</title> </head> <body> <script type="text/javascript"> document.write("<h1>PASS</h1>"); </script> <noscript> <h1>FAIL</h1> </noscript> </body> </html> When I open this file from the C: drive, it fails every time. If I execute it anywhere else (local/remote web server or on a mapped network drive), it works just fine. When I am simply browsing the Internet, Javascript on web sites works just fine. It is only failing on files running from my C: drive. Additionally, I have had a couple other programmers in the department try this file on their C: drive, and it works fine for them. So I don't believe it is a group policy thing. I need to fix this because I do extensive testing from my C: drive, and I am accustomed to doing so. I don't want to get into the habit of moving files to a different drive just to test. Things I have tried: Enabled "Allow Active Content to Run Files on My Computer" in Options | Advanced | Security Enabled "Allow Active Scripting" in Options | Security | Custom Level Verified that "Script" was not checked as disabled in Developer Toolbar Added localhost to Trusted Sites in Options Disabled McAffee completely (momentarily, with help from network admin) Used an older DOCTYPE in my test HTML page Re-installed IE8 completely Ran regsvr32 on the JScript.dll Slammed keyboard I am sure that there is a setting somewhere that will fix this problem, possibly in the registry. I would not be surprised if it was related to the developer toolbar. At this point I do not know where else to look. Can anyone help me resolve this problem? EDIT: Regardless of the bounty, this issue is still ongoing.

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >