Search Results

Search found 16150 results on 646 pages for 'si keep'.

Page 68/646 | < Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >

• AMD FX8350 CPU - CoolerMaster Silencio 650 Case - New Water Cooling System

  - by fat_mike

  Lately after a use of 6 months of my AMD FX8350 CPU I'm experiencing high temperatures and loud noise coming from the CPU fan(I set that in order to keep it cooler). I decided to replace the stock fan with a water cooling system in order to keep my CPU quite and cool and add one or two more case fans too. Here is my case's airflow diagram: http://www.coolermaster.com/microsite/silencio_650/Airflow.html My configuration now is: 2x120mm intake front(stock with case) 1x120mm exhaust rear(stock with case) 1 CPU stock I'm planning to buy Corsair Hydro Series H100i(www.corsair.com/en-us/hydro-series-h100i-extreme-performance-liquid-cpu-cooler) and place the radiator in the front of my case(intake) and add an 120mm bottom intake and/or an 140mm top exhaust fan. My CPU lies near the top of the MO. Is it a good practice to have a water-cooling system that takes air in? As you can see here the front of the case is made of aluminum. Can the fresh air go in? Does it even fit? If not, is it wiser to get Corsair Hydro Series H80i (www.corsair.com/en-us/hydro-series-h80i-high-performance-liquid-cpu-cooler) and place the radiator on top of my case(exhaust) and keep the front 2x120mm stock and add one more as intake on bottom. If you have any other idea let me know. Thank you. EDIT: The CPU fan running ~3000rpm and temp is around 40~43C on idle and save energy. When temp is going over 55C when running multiple programs and servers on localhost(tomcat, wamp) rpm is around 5500 and loud! I'm running Win8.1 CPU not overclocked PS: Due to my reputation i couldn't post the links that was necessary. I will edit ASAP.

  Read the article

• Why are snapshots considered as temporary backups not real backups?

  - by Samselvaprabu

  I am using VMware ESXi. In our team we use to provide snapshots for long term backup. Then we faced issues like memory spillover and the server got hang up. I started reading in VMware knowledgebase articles and everywhere. Everywhere it was recommended not to have snapshots for a long time. Even VMware advised to keep snapshots for maximum of three days. But our team kept asking us to have at least two permanent snapshots (till deleting the VM). Sometimes we may use the VM for a year). one snapshot is for fresh machine state. (So when we complete testing an application, we will revert back to fresh state and install another application) (If I did not allow that, I may often need to host the VM.) Next snapshot for keeping the VM in some state (maybe they would have found an issue and keep that state for some time. Or they may install prerequisites for the application and keep the machine ready for testing.) Logically, their needs seems to be fair. But if I allow that, I am to permit them to hold the snapshots for long time. We are not using our VM as a mail server or database server. Why is keeping snapshots for long time having an adverse effect? Why are snapshots considered as temporary backups, not real backups?

  Read the article

• Apache 403 after configuring varnish

  - by w0rldart

  I just don't know where else to look and what else to do. I keep getting a 403 error on all my vhosts after setting varnish 3.0 Apacher log: [error] [client 127.0.0.1] client denied by server configuration: /etc/apache2/htdocs Headers: http://domain.com/ GET / HTTP/1.1 Host: domain.com User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:16.0) Gecko/20100101 Firefox/16.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate DNT: 1 Connection: keep-alive Cookie: __utma=106762181.277908140.1348005089.1354040972.1354058508.6; __utmz=106762181.1348005089.1.1.utmcsr=OTHERDOMAIN.com|utmccn=(referral)|utmcmd=referral|utmcct=/galerias/cocinas Cache-Control: max-age=0 HTTP/1.1 403 Forbidden Vary: Accept-Encoding Content-Encoding: gzip Content-Type: text/html; charset=iso-8859-1 X-Cacheable: YES Content-Length: 223 Accept-Ranges: bytes Date: Sat, 01 Dec 2012 20:35:14 GMT X-Varnish: 1030961813 1030961811 Age: 26 Via: 1.1 varnish Connection: keep-alive X-Cache: HIT ---------------------------------------------------------- /etc/default/varnish: DAEMON_OPTS="-a ip.ip.ip.ip:80 \ -T localhost:6082 \ -f /etc/varnish/main.domain.vcl \ -S /etc/varnish/secret \ -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G" #-s malloc,256m" My vcl file: http://pastebin.com/axJ57kD8 So, any ideas what I could be missing? Update Just so you know, ports: NameVirtualHost *:8000 Listen 8000 and <VirtualHost 205.13.12.12:8000>

  Read the article

• Recommended partitions to migrate from Windows XP to Windows 7 and Ubuntu

  - by Juanillo

  Hello, I have a system with Windows XP. My hard disk has 189 GB NTFS. I want to change the operative system to windows 7, but I want to add Ubuntu as well. As the change might take several days (because I don't have much time) I want to install one system (or Windows 7 or Ubuntu) keeping my windows XP installed in another partition so if something doesn't work in thebrand new operating system installed I can use my Windows XP installation. So I've thouht about doing something like this: Copy the data I want to keep to an external hard disk. Make partitions enough to install windows 7, keep data in another partition and another one to install Ubuntu. Copy the data I want to keep to the partition I've just created. Install Ubuntu in the partitions for Ubuntu. Check if Ubuntu works fine If it works OK install Windows 7 on the partition of Windows XP (Windows XP will be erased). Reinstall the programs in Windows 7. So my question is: How many partitions do you recommend me to have (and the size of each one and NTFS or FAT32)? The operative system I'm going to use more is Windows 7 (though I love Linux I use many programs which are windows dependant). Do you think I should do anything else / change something in the proccess to avoid any problem? I don't know if making the partitions can harm the data I have in the disk. Thanks.

  Read the article

• Networking DOS within Windows 7 XP Mode, with a Windows XP/7 Networked Share

  - by theonlylos

  For awhile now, one of my clients has been stuck with Corel Paradox 4.0 (it used to be the biggest database system in the DOS days, until Microsoft released Access in the early 90's) so for awhile I've managed to keep it on life support on Windows XP for a few years, however since switching to Windows 7 x64, I've had to resort to using XP Mode as the sandbox to keep it up and running. While I am able to run Paradox as usual in XP Mode, I'm having a serious issue where if I try connecting the install to the network share (which is located on the Windows 7 portion of the system), Paradox keeps exiting because it says the serial number is invalid. Now, I know for a fact that this is an issue with the virtual loopback adapter and also having the VM linked to the physical ethernet adapter -- and while I have solved this issue before, most of my fixes have been bandages since after a few weeks the issue pops up again. Long story short, I wanted to ask if there is a permanent way to link a DOS program to a network share address. For example, when I try doing \tsclient\paradox (the Windows 7 Address) I keep getting an error saying I need a valid network address. I've tried mapping that folder to various drive letters such as P:\Paradox -- but for some reason that keeps failing over time. For what it's worth, Paradox uses a .SOM file to store the network settings, however it isn't editable in Notepad but rather it's controlled by a wizard in Paradox. But if that extension rings any bells, I'd welcome any insights.

  Read the article

• mod_deflate doesn't work [closed]

  - by kikio

  I want to gzip my static files. so put this in .htaccess: <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/text text/html text/plain text/xml text/css application/x-javascript application/javascript </IfModule> and looked for mod_deflate in phpinfo() output Loaded Modules section, and I found it. But when I track server responses with Firebug, no gzipped file can be found: HTTP/1.1 200 OK Date: Sat, 08 Sep 2012 21:41:21 GMT Last-Modified: Sat, 08 Sep 2012 21:26:04 GMT Accept-Ranges: bytes Cache-Control: max-age=604800 Expires: Sat, 15 Sep 2012 21:41:21 GMT Vary: Accept-Encoding Keep-Alive: timeout=3, max=50 Connection: Keep-Alive Content-Type: text/css Content-Length: 18206 What's the problem? I'm sure I have mod_deflate enabled (according to php apache_get_modules()). UPDATE: the request headers: GET /d/jquery-ui.css HTTP/1.1 Host: 127.0.0.1 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:15.0) Gecko/20100101 Firefox/15.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate DNT: 1 Connection: keep-alive Pragma: no-cache Cache-Control: no-cache

  Read the article

• How do you handle data archiving?

  - by 20th Century Boy

  Backups are one thing, but long term archival is another. For example, you might be required to store emails for 7 years, or keep all project data indefinitely. I used to save archives to tape, but then I've had tapes get destroyed (drives rip the tape out). So...write to 2 tapes I hear you say. Is that what others do? Have 2 (or more) tapes of the same data for redundancy? But then the other issue is that tapes cannot usually be read by different backup software vendors. Eg if you go from Arcserve - Backup Exec - Commvault over 10 years you would need to keep all 3 systems so that you could restore old data. Likewise for hardware. Old tapes might not be barcoded. Might not be compatible with the new library etc etc. So do you keep old tape hardware AND old software just in case you might need to restore a 10 year-old file? Or...when you move to a new backup system do you migrate all archived data to the new system and re-archive it onto new tapes? That could be a huge job. Any thoughts?

  Read the article

• Apache and MySQL taking all the memory? Maximum connections?

  - by lpfavreau

  I've a had one of our servers going down (network wise) but keeping its uptime (so looks the server is not losing its power) recently. I've asked my hosting company to investigate and I've been told, after investigation, that Apache and MySQL were at all time using 80% of the memory and peaking at 95% and that I might be needing to add some more RAM to the server. One of their justifications to adding more RAM was that I was using the default max connections setting (125 for MySQL and 150 for Apache) and that for handling those 150 simultaneous connections, I would need at least 3Gb of memory instead of the 1Gb I have at the moment. Now, I understand that tweaking the max connections might be better than me leaving the default setting although I didn't feel it was a concern at the moment, having had servers with the same configuration handle more traffic than the current 1 or 2 visitors before the lunch, telling myself I'd tweak it depending on the visits pattern later. I've also always known Apache was more memory hungry under default settings than its competitor such as nginx and lighttpd. Nonetheless, looking at the stats of my machine, I'm trying to see how my hosting company got those numbers. I'm getting: # free -m total used free shared buffers cached Mem: 1000 944 56 0 148 725 -/+ buffers/cache: 71 929 Swap: 1953 0 1953 Which I guess means that yes, the server is reserving around 95% of its memory at the moment but I also thought it meant that only 71 out of the 1000 total were really used by the applications at the moment looking a the buffers/cache row. Also I don't see any swapping: # vmstat 60 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 57612 151704 742596 0 0 1 1 3 11 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 1 1 24 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 2 1 18 0 0 100 0 0 0 0 57604 151704 742596 0 0 0 0 1 13 0 0 100 0 And finally, while requesting a page: top - 08:33:19 up 3 days, 13:11, 2 users, load average: 0.06, 0.02, 0.00 Tasks: 81 total, 1 running, 80 sleeping, 0 stopped, 0 zombie Cpu(s): 1.3%us, 0.3%sy, 0.0%ni, 98.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024616k total, 976744k used, 47872k free, 151716k buffers Swap: 2000052k total, 0k used, 2000052k free, 742596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24914 www-data 20 0 26296 8640 3724 S 2 0.8 0:00.06 apache2 23785 mysql 20 0 125m 18m 5268 S 1 1.9 0:04.54 mysqld 24491 www-data 20 0 25828 7488 3180 S 1 0.7 0:00.02 apache2 1 root 20 0 2844 1688 544 S 0 0.2 0:01.30 init ... So, I'd like to know, experts of serverfault: Do I really need more RAM at the moment? How do they calculate that for 150 simultaneous connections I'd need 3Gb? Thanks for your help!

  Read the article

• HTTP responses curl and wget different results

  - by Fab

  To check HTTP response header for a set of urls I send with curl the following request headers foreach ( $urls as $url ) { // Setup headers - I used the same headers from Firefox version 2.0.0.6 $header[ ] = "Accept: text/xml,application/xml,application/xhtml+xml,"; $header[ ] = "text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5"; $header[ ] = "Cache-Control: max-age=0"; $header[ ] = "Connection: keep-alive"; $header[ ] = "Keep-Alive: 300"; $header[ ] = "Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7"; $header[ ] = "Accept-Language: en-us,en;q=0.5"; $header[ ] = "Pragma: "; // browsers keep this blank. curl_setopt( $ch, CURLOPT_URL, $url ); curl_setopt( $ch, CURLOPT_USERAGENT, 'Googlebot/2.1 (+http://www.google.com/bot.html)'); curl_setopt( $ch, CURLOPT_HTTPHEADER, $header); curl_setopt( $ch, CURLOPT_REFERER, 'http://www.google.com'); curl_setopt( $ch, CURLOPT_HEADER, true ); curl_setopt( $ch, CURLOPT_NOBODY, true ); curl_setopt( $ch, CURLOPT_RETURNTRANSFER, true ); curl_setopt( $ch, CURLOPT_FOLLOWLOCATION, true ); curl_setopt( $ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY ); curl_setopt( $ch, CURLOPT_TIMEOUT, 10 ); //timeout 10 seconds } Sometimes I receive 200 OK which is good other time 301, 302, 307 which I consider good as well, but other times I receive weird status as 406, 500, 504 which should identify an invalid url but when I open it on the browser they are fine for example the script returns http://www.awe.co.uk/ => HTTP/1.1 406 Not Acceptable and wget returns wget http://www.awe.co.uk/ --2011-06-23 15:26:26-- http://www.awe.co.uk/ Resolving www.awe.co.uk... 77.73.123.140 Connecting to www.awe.co.uk|77.73.123.140|:80... connected. HTTP request sent, awaiting response... 200 OK Does anyone know which request header I am missing or adding in excess?

  Read the article

• Wget save cookies not working

  - by TrymBeast

  I've been trying to login in the pyload through the web api, but wget is not saving the cookies and I don't understand why. I'm using the following command: wget --delete-after --keep-session-cookies --save-cookies=my_cookies.txt --post-data="username=USERNAME&password=PASSWORD" http://localhost:8000/api/login But the content of my_cookies.txt is: # HTTP cookie file. # Generated by Wget on 2012-06-23 22:31:33. # Edit at your own risk. When I run the same command but in debug mode I get the following output that includes the set cookie in the header response: DEBUG output created by Wget 1.10.2 (Red Hat modified) on linux-gnueabi. --22:31:11-- http://localhost:8000/api/login Resolving localhost... 127.0.0.1 Caching localhost => 127.0.0.1 Connecting to localhost|127.0.0.1|:8000... connected. Created socket 3. Releasing 0x000504d0 (new refcount 1). ---request begin--- POST /api/login HTTP/1.0 User-Agent: Wget/1.10.2 (Red Hat modified) Accept: */* Host: localhost:8000 Connection: Keep-Alive Content-Type: application/x-www-form-urlencoded Content-Length: 32 ---request end--- [POST data: username=USERNAME&password=PASSWORD] HTTP request sent, awaiting response... ---response begin--- HTTP/1.1 200 OK Content-Length: 34 Content-Type: application/json Cache-Control: no-cache, must-revalidate Set-cookie: beaker.session.id=405390ddc809efed54820638c95d7997; expires=Tue, 19-Jan-2038 04:14:07 GMT; Path=/ Connection: Keep-Alive Date: Sat, 23 Jun 2012 21:31:11 GMT Server: CherryPy/3.1.2 WSGI Server ---response end--- 200 OK hs->local_file is: login (not existing) Registered socket 3 for persistent reuse. TEXTHTML is on. Length: 34 [application/json] Saving to: `login' 100%[=======================================>] 34 --.-K/s in 0s 22:31:11 (1.28 MB/s) - `login' saved [34/34] Removing file due to --delete-after in main(): Removing login. Saving cookies to my_cookies.txt. Done saving cookies. Can anyone tell me what am I doing wrong? Thanks in advance!

  Read the article

• 4.5 Load average on single CPU

  - by Webnet

  I'm currently looking at... top - 16:27:37 up 27 min, 1 user, load average: 4.96, 3.75, 2.87 Tasks: 141 total, 6 running, 135 sleeping, 0 stopped, 0 zombie Cpu(s): 91.4%us, 6.9%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.3%hi, 1.3%si, 0.0%st Mem: 514952k total, 507500k used, 7452k free, 5652k buffers Swap: 1044184k total, 281400k used, 762784k free, 89164k cached This is a single 2.0 Ghz CPU with 2 GB RAM Is it time for an upgrade? I'm watching and it seems to stick around 50% CPU "us" which I assume means usage.

  Read the article

• CentOS centralised logging, syslogd, rsyslog, syslog-ng, logstash sender?

  - by benbradley

  I'm trying to figure out the best way to setup a central place to store and interrogate server logs. syslog, Apache, MySQL etc. I've found a few different options but I'm not sure what would be best. I'm looking for something that is easy to install and keep updated on many virtual machines. I can add it to a VM template going forward but I'd also like it to be easy to install to keep the VM complexity down. The options I've found so far are: syslogd syslog-ng rsyslog syslogd/syslog-ng/rsyslog to logstash/ElasticSearch logstash agent in each log "client" to send to Redis/logstash/ElasticSearch And all sorts of permutations of the above. What's the most resilient and light from the log "client" perspective? I'd like to avoid the situation where log "clients" hang because they are unable to send their logs to the logging server. Also I would still like to keep local logging and the rotation/retention provided by logrotate in place. Any ideas/suggestions or reasons for or against any of the above? Or suggestions of a different structure entirely? Cheers, B

  Read the article

• Ubuntu Server 12.04 CPU Load

  - by zertux

  I have a Server (2x Hexa-Core Xeon E5649 2.53GHz w/HT with 32GB RAM and 20000 GB Bandwidth) running Ubuntu Server 12.04 LTS. The server runs LAMP and serves one website only, the estimated number of users is to be ~ 15,000 at the same time. At the moment i have around 2000 users online each of them runs 50 MySQL queries (small values mostly select and insert) from the beginning until the end of the session. Server CPU Load is high at this number of connections while the RAM usage is almost 1GB out of 32GB its worth mentioning that the server was running very fast with no problems at all but am concerned about the load average. http://s12.postimage.org/z7hi6mz3h/photo.png top - 03:02:43 up 9 min, 2 users, load average: 50.83, 30.14, 12.83 Tasks: 432 total, 1 running, 430 sleeping, 0 stopped, 1 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 66.5%id, 33.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32939992k total, 3111604k used, 29828388k free, 84108k buffers Swap: 2048280k total, 0k used, 2048280k free, 1621640k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2860 root 20 0 25820 2288 1420 S 3 0.0 0:11.18 htop 1182 root 20 0 0 0 0 D 2 0.0 0:01.46 kjournald 1935 mysql 20 0 12.3g 161m 7924 S 1 0.5 102:31.45 mysqld 11 root 20 0 0 0 0 S 0 0.0 0:00.38 kworker/0:1 1822 www-data 20 0 247m 25m 4188 D 0 0.1 0:01.81 apache2 2920 www-data 20 0 0 0 0 Z 0 0.0 0:01.20 apache2 <defunct> 2942 www-data 20 0 247m 23m 3056 D 0 0.1 0:00.20 apache2 3516 www-data 20 0 247m 23m 3028 D 0 0.1 0:00.06 apache2 3521 www-data 20 0 247m 23m 3020 D 0 0.1 0:00.09 apache2 3664 www-data 20 0 247m 23m 3132 D 0 0.1 0:00.09 apache2 3674 www-data 20 0 247m 23m 3252 D 0 0.1 0:00.06 apache2 3713 www-data 20 0 247m 23m 3040 D 0 0.1 0:00.09 apache2 1 root 20 0 24328 2284 1344 S 0 0.0 0:03.09 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.01 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 root@server:~/codes# vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 19 0 0 29684012 86112 1689844 0 0 19 590 254 231 48 0 47 5 23 0 0 29704812 86128 1697672 0 0 4 320 11100 8121 77 1 22 0 33 0 0 29671044 86156 1705308 0 0 0 5440 13190 9140 95 1 4 0 33 3 0 29670088 86160 1706288 0 0 0 32932 12275 7297 99 0 1 0 35 0 0 29693456 86188 1710724 0 0 4 676 12701 7867 98 1 1 0 ^C I have not changed any of the default configurations that comes with Ubuntu. Is this load normal for such powerful server ? is there any optimization i can make to Apache/MySQL to minimize the load ? What do you recommend ?

  Read the article

• Is the /etc/inittab file read top down?

  - by PeanutsMonkey

  When the init process is executed when the kernel has loaded, does it read the /etc/inittab file in a top down approach i.e. it executes each line as it appears in the file. If so and based on my reading and understanding, does this mean that it enters the documented run level and then launch sysinit process or vice versa? For example the common examples I have seen are id:3:initdefault: # System initialization. si::sysinit:/etc/rc.d/rc.sysinit

  Read the article

• How to kill an "exiting" process on OS X (state = E)

  - by sbwoodside

  I have a process on my Mac OS X system which is in state E ("The process is trying to exit."): % ps auwwwxc | grep -si JavaApplicationS sbwoodside 84547 0.0 0.0 0 0 ?? E Mon12am 0:00.00 (JavaApplicationS) kill -9 84547 does nothing. Is there any special trick to get this process to exit? It's holding some ports open that I would like it to let go of.

  Read the article

• Disable "Do you want to change the color scheme to improve performance?" warning

  - by William Lawn Stewart

  Sometimes this dialog box will pop up (see screenshot below). Every time it appears I select "Keep the current color scheme, and don't show this message again". Windows then reminds me again -- either the next day or after reboot, or sometimes another 5 minutes later. Do you want to change the color scheme to improve performance? Windows has detected your computer's performance is slow. This could be because there are not enough resources to run the Windows Aero color scheme. To improve performance, try changing the color scheme to Windows 7 Basic. Any change you make will be in effect until the next time you log on to Windows Change the color scheme to Windows 7 Basic Keep the current color scheme, but ask me again if my computer continues to perform slowly Keep the current color scheme, and don't show this message again Is there some reason why Windows is ignoring/forgetting my attempts to suppress the dialog? I'd love to never ever see it again, it's annoying, and it alt-tabs me out of fullscreen applications. If it matters, I'm running Windows 7 x64 Professional. I believe the dialog appears because I'm forcing Vsync and Triple Buffering for DirectX applications.

  Read the article

• File Sync Solution for Batch Processing (ETL)

  - by KenFar

  I'm looking for a slightly different kind of sync utility - not one designed to keep two directories identical, but rather one intended to keep files flowing from one host to another. The context is a data warehouse that currently has a custom-developed solution that moves 10,000 files a day, some of which are 1+ gbytes gzipped files, between linux servers via ssh. Files are produced by the extract process, then moved to the transform server where a transform daemon is waiting to pick them up. The same process happens between transform & load. Once the files are moved they are typically archived on the source for a week, and the downstream process likewise moves them to temp then archive as it consumes them. So, my requirements & desires: It is never used to refresh updated files - only used to deliver new files. Because it's delivering files to downstream processes - it needs to rename the file once done so that a partial file doesn't get picked up. In order to simplify recovery, it should keep a copy of the source files - but rename them or move them to another directory. If the transfer fails (network down, file system full, permissions, file locked, etc), then it should retry periodically - and never fail in a non-recoverable way, or a way that sends the file twice or never sends the file. Should be able to copy files to 2+ destinations. Should have a consolidated log so that it's easy to find problems Should have an optional checksum feature Any recommendations? Can Unison do this well?

  Read the article

• Requesting better explanation for expires headers

  - by syn4k

  I have successfully implemented expires headers however, for several days I have been stumped by one thing. This article: http://www.tipsandtricks-hq.com/how-to-add-far-future-expires-headers-to-your-wordpress-site-1533 states Keep in mind that when you use expires header the files are cached in the browser until it expires so do not use this on files that changes frequently. Other sites indicate the same in my reading. But this doesn't seem to be true. I have updated an image, using the same name, several times. Each time I update and refresh my browser, the new image (with the same name) displays. I understand from this article that the old image should display unless I use a new name. Do you happen to know where the misunderstanding is? I have verified that the image in question has expires headers set on it: Request Headers: Host domain.com User-Agent Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.28) Gecko/20120306 Firefox/3.6.28 FirePHP/0.5 Accept image/png,image/*;q=0.8,*/*;q=0.5 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer http://domain.com/index.php Cookie __utma=1.61479883.1332439113.1332783348.1332796726.4; __utmz=1.1332439113.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none);PHPSESSID=lv2hun9klt2nhrdkdbqt8abug7; __utmb=1.33.10.1332796726; __utmc=1; ck_authorized=true x-insight activate If-Modified-Since Mon, 26 Mar 2012 21:55:33 GMT Cache-Control max-age=0 Response Headers: Date Mon, 26 Mar 2012 22:06:50 GMT Server Apache/2.2.3 (CentOS) Connection close Expires Wed, 25 Apr 2012 22:06:50 GMT Cache-Control max-age=2592000

  Read the article

• Why Wireshark does not recognize this HTTP response?

  - by Alois Mahdal

  I have a trivial CGI script that outputs simple text content. It's written in Perl and using CGI module and it specifies only the most basic headers: print $q->header( -type => 'text/plain', -Content_length => $length, ); print $stuff; There's no apparent issue with functionality, but I'm confused about the fact that Wireshark does not recognize the HTTP response as HTTP--it's marked as TCP. Here is request and response: GET /cgi-bin/memfile/memfile.pl?mbytes=1 HTTP/1.1 Host: 10.6.130.38 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: cs,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip, deflate Connection: keep-alive HTTP/1.1 200 OK Date: Thu, 05 Apr 2012 18:52:23 GMT Server: Apache/2.2.15 (Win32) mod_ssl/2.2.15 OpenSSL/0.9.8m Content-length: 1048616 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/plain; charset=ISO-8859-1 XXXXXXXX... And here is the packet overview (Full packet is here on pastebin) No. Time Source srcp Destination dstp Protocol Info tcp.stream abstime 5 0.112749 10.6.130.38 80 10.6.130.53 48072 TCP [TCP segment of a reassembled PDU] 0 20:52:23.228063 Frame 5: 1514 bytes on wire (12112 bits), 1514 bytes captured (12112 bits) Ethernet II, Src: Dell_97:29:ac (00:1e:4f:97:29:ac), Dst: Dell_3b:fe:70 (00:24:e8:3b:fe:70) Internet Protocol Version 4, Src: 10.6.130.38 (10.6.130.38), Dst: 10.6.130.53 (10.6.130.53) Transmission Control Protocol, Src Port: http (80), Dst Port: 48072 (48072), Seq: 1, Ack: 330, Len: 1460 Now when I see this in Wireshark: there's usual TCP handshake then the GET request shown as HTTP with preview then the next packet contains the response, but is not marked as an HTTP response--just a generic "[TCP segment of a reassembled PDU]", and is not caught by "http.response" filter. Can somebody explain why Wireshark does not recognize it? Is there something wrong with the response?

  Read the article

• Advice: USB Monitoring Programming

  - by Kashif

  I need an advice about USB programming in linux. i have to design a USB monitoring program that 'll keep checking usb ports of a linux cent os. as soon as a usb or external hard disk is connected, this program will shoot an email to some specific person about detail of usb (as size, mount on, time). when usb is disconnected, it will again shoot an email to some person with same kind of information. mean while this program will also write logs in syslog/messages with name of programing for easy tracking. Now I want ask that what is best way to develop this program. as I'm new to this field so i know nothing about it? either i should use perl, bash scripting or some other language? I have no idea what is right way to adopt coz this program will keep running all the time to keep a check on usb ports. I know few commands in like lsusb, fdisk (to check attached usb) and df -h (to get detail of usb) but dont know how i can achieve using these commands that i am thinking. also one more thing that in future i also need to modify this program for ubuntu and Citrix XenServer and it should be same everywhere.

  Read the article

• Which Revision Control Software to use for Personal Dropbox?

  - by wag2639

  I want to set up a sync repositiory that would be similar to Dropbox. Goals/Requirements: Free (Open Source very preferable) Linux host (probably Ubuntu) Windows/Mac/Linux clients Potential for multiple users with limited access (optional) Preferable easy, doesn't necessarily need to be automatic Revision control very preferable Basically, I want to be able to use multiple computers, possible with different OS's, and be able to access, use, and sync files across all of them. I also want to have a local copy of the repository for when I'm not connected to the network (as if I'm working on a laptop, I want to keep a local repository to keep revision and merge later with "master" repository). For example, I'm editing a few pictures on my laptop during the day outside of my network, but when I get home, I would like to sync the changes, including incremental changes, with my desktop at home. I would also like my roommates to be able to access and use this repository too but limit access to certain files. For example, I may want to use this to backup financial records but wouldn't want them to have access to those files. I'm a programmer and familiar with SVN but I know that wouldn't be the most appropriate since it doesn't handle binaries well and doesn't keep a local repository. I know better choices exist but I don't really know them well enough to choose the best one.

  Read the article

• virtual machines, dual booting and data disks on SSD

  - by stevemarvell

  This is in planning, so if I've got the strategy wrong, please let me know. There are multiple questions here, but I think they all degenerate to the same answers. The hardware is a laptop with a single SSD. I'm trying to not lose the performance of the SSD. I plan a native dual booting Windows (plus cygwin) and Linux machine which is my BYOD and represents the development environment. I keep the codebase on a shared partition (though sometimes this is an external thunderbolt SSD) which can be natively "mounted" by whichever OS is in operation. I boot into one or the other environments depending on the task in hand. Sometime I have to develop with windows tools, but generally, Linux is my preferred development environment. It would be ideal if I could VM the other OS and run either in either. I'm going to assume, because I've not found a sensible VM based solution, that I have get samba involved to share the code partition between VMs. Is this going to blow my SSD performance in the VM? The client also supplies me with a VM for the target environment, usually linux. This is not often suited to development and is used for testing only. I normally keep two copies of this, one as a sandbox and one which I deploy to using the client's preferred method. I keep these VM snapshots on the shared partition. The latter is interacted with over the network and so has no disk sharing requirements. However, it would be useful for the sandbox to be able to "mount" the code base from the natively running OS. Is this samba or nfs again, depending on the native OS? Am I missing a trick which allows this to all work smoothly with all four environments running at once without loosing the SSD performance?

  Read the article

• logrotate: neither rotate nor compress empty files

  - by Andrew Tobey

  i have just set up an (r)syslog server to receive the logs of various clients, which works fine. only logrotate is still not behaving as intending. i want logrotate to create a new logfile for each day, but only to keep and store i.e. compress non-empty files. my logrotate config looks currently like this # sample configuration for logrotate being a remote server for multiple clients /var/log/syslog { rotate 3 daily missingok notifempty delaycompress compress dateext nomail postrotate reload rsyslog >/dev/null 2>&1 || true endscript } # local i.e. the system's very own logs: keep logs for a whole month /var/log/kern.log /var/log/kernel-info /var/log/auth.log /var/log/auth-info /var/log/cron.log /var/log/cron-info /var/log/daemon.log /var/log/daemon-info /var/log/mail.log /var/log/rsyslog /var/log/rsyslog-info { rotate 31 daily missingok notifempty delaycompress compress dateext nomail sharedscripts postrotate reload rsyslog >/dev/null 2>&1 || true endscript } # received i.e. logs from the clients /var/log/path-to-logs/*/* { rotate 31 daily missingok notifempty delaycompress compress dateext nomail } what i end up with is having is some sort of "summarized" files such as filename-datestampDay-Day and corresponding .gz files. What I do have are empty files, which are eventually zipped. so does the notifempty directive is in fact responsible for these DayX-DayY files, days on which really nothing happened? what would be an efficient way to drop both, empty log files and their .gz files, so that I eventually only keep logs/compressed files that truly contain data?

  Read the article

• Using SSH, transfer webURL to remote machine

  - by AlanTuring

  Hi so i was doing some research in the library so i could use some pictures later on my Desktop computer in my room. I have space on my Lab account which i usually SSH into, and i was wondering if URL's can be directly transferred over to a remote machine and saved on the hard disk. I was thinking something like this: scp http://click.si.edu/images/truncatedurl.jpg /home3/etc.../filename.jpg is this possible? Thanks in advance.

  Read the article

• Strange issue in header location redirect

  - by hd01

  I have three websites hosted (example1.com, example2.com, example3.com) on a server. There is a page (test.php) on example1.com with just code below inside it: <?php header('Location:http://example2.com/a.php'); ?> When I browse test.php it goes to http://example1.com/a.php . it doesn't understand it is another domain url, it tried to find the page on itself. but when I put http://google.com instead of example2.com/a.php it works correct. I really get confused. What is the problem ? Should I set some configuration on the server? ( I am administrator of the hosting server ). Ps. The server is behind a pound server. Here's the Firebug Net output for example1.com/test.php Response Headers: HTTP/1.1 302 Found Date: Tue, 09 Oct 2012 09:03:34 GMT Server: Apache/2.2.16 (Debian) Location: http://example1.com/a.php Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 21 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html; charset=utf-8 Request Headers: Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding gzip, deflate Accept-Language en-us,en;q=0.5 Connection keep-alive Cookie mycookie Host example1.com User-Agent Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20100101 Firefox/14.0.1

  Read the article

< Previous Page | 64 65 66 67 68 69 70 71 72 73 74 75  | Next Page >