Search Results

Search found 5304 results on 213 pages for 'audio streaming'.

Page 7/213 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • BluRay audio/video stuttering with PowerDVD 11, WinDVD 11 Pro, etc? Xonar/Auzen HD audio option?

    - by jrista
    I recently upgraded my Windows 7 MediaCenter HTPC due to a motherboard failure (really old motherboard and cpu, it was on its last legs.) I chose to upgrade to an i5 system with everything built into the motherboard. I did my due diligence, researched, and found some hardware that was within my budget. I ended up with: Core i5 2500K (3.3Ghz) Corsair XMS3 2x2Gb DDR3 (4Gb) ASUS P8H 61-M LE/CSM MicroCenter 64Gb SSD (Previous BluRay player, forget the brand) The system is pretty awesome, and plays everything I have perfectly. I almost went with an Atom solution, however there have been numerous notes that they do not play NetFlix Instant Watch well...and I am a heavy Netflix IW user. High definition BluRay rips work well, although they usually contain lower audio quality than the BluRay's they were ripped from. The real problem I am encountering is playing back BluRay video from discs. For some reason, I am encountering rather terrible stuttering problems with both the audio and video. The stuttering is synchronous in both, and occurs at seemingly random intervals. I've used PowerDVD 9, PowerDVD 11 trial, and WinDVD 11 Pro trial. All three have stuttering problems, although PowerDVD 11 seems to have the least. Watching system resource usage, CPU load is never above 20%, and memory usage tends to be a constant 1/3rd the total available system memory. When playback is fine, its superb...the video is crystal clear. The audio quality is ok, certainly not what I would expect from a BluRay disc. I did some research, and it seems that playing BluRay from a PC causes a downsampling of the audio? I am curious if the audio is my primary problem here, the cause of the stuttering I am encountering? When stuttering occurs, the audio gets REALLY bad, while the video just pauses momentarily every second until for whatever reason everything picks up and runs fine (usually after a few seconds to a couple minutes.) The audio chipset is a Realtek HD ALC887 8-channel, supposedly designed to support BluRay playback. Has anyone encountered any issues like this playing back bluray discs on a PC (namely with PowerDVD...WinDVD was FAR worse, and seemed to have real trouble even reading the discs, and I have no interest in fiddling with it further.) Is there any reason to suspect the video decoding as the problem?(Given how bad the audio gets during a stutter, and how clean the video remains, I am inclined to think the issue boils down to audio.) Is it even remotely possible that the motherboard, cpu, or ram are causing the stuttering (all three are pretty blazing fast...faster than the hardware that I replaced, which seemed to play BluRay fine with PowerDVD 9.) I've read a bit about the Asus Xonar HDAV 1.3 and the Auzen X-Fi HomeTheater HD home theater hi-fi audio cards. Seems they are the only way to get true full-quality, uncompressed BluRay audio bitstreaming over HDMI on a PC. None of the usual suspects seem to have these cards in stock, however. Are these cards worth getting? Are they even still available, or have they been discontinued (if so, that would indeed be sad...they sound simply fantastic.)

    Read the article

  • Darwin Streaming Server

    - by Asmv9
    Hello, I am using Darwin Streaming server and i would like to know if i can do this: While the server is streaming one video file,at some point switch to another video file and start the streaming of this new file from the point the first file has stopped?and can i do this in one rtsp request? Thank u in advance, Any suggestions will be helpful.

    Read the article

  • Best Way to Load Streaming Media Content in Intranet

    - by Magic
    Hello, What would be the best way to deal with large streaming media content in Intranet. We have a 50 MB file that is to be loaded to our Intranet site. Currently we have just pointed it to a file location instead of using a Data Streaming Server. This will download to each client when selected and is obviously not a good approach to accessing streaming media when accessing from overseas offices. Any suggestions? Cheers, Magic

    Read the article

  • FFmpeg not recording audio during screen capture

    - by King
    I'm using the script below to run FFmpeg on Ubuntu 10.10. I followed these instructions to install FFmpeg & x264. While ffmpeg does capture the screen it does not capture the mic audio. I've checked that the mic works via "System Preferences". Anyone have any ideas on what the problem(s) could be and suggestions on how to resolve this issue? Thanks. ffmpeg -f alsa -ac 2 -i hw:0,0 -f x11grab -r 30 -s $(xwininfo -root | grep 'geometry' | awk '{print $2;}') -i :0.0 -acodec pcm_s16le -vcodec libx264 -vpre lossless_ultrafast -threads 0 -y screen-capture.mkv

    Read the article

  • Audio Panning using RtAudio

    - by user1801724
    I use Rtaudio library. I would like to implement an audio program where I can control the panning (e.g. shifting the sound from the left channel to the right channel). In my specific case, I use a duplex mode (you can find an example here: duplex mode). It means that I link the microphone input to the speaker output. I seek on the web, but I did not find anything useful. Should I apply a filter on the output buffer? What kind of filter? Can anyone help me? Thanks

    Read the article

  • Looking for Non Hosted Audio & Video Podcasting Solution for Church Websites

    - by motboys
    I am looking for a solution that will do the following: User uploads audio and/or video files with title, desc. image etc Solution embeds info into ID3 tags Solution generates RSS feed Solution embeds new content in our website Content on website is searchable This is for a couple of church websites I manage. I am looking for the ability to do the above with a sermon mp3 and also a video. At the moment we are doing it with multiple steps / people involved and I want to automate the process. I can't seem to find a solution that does all of the above. Thank you!

    Read the article

  • Which API for cross platform mobile audio?

    - by deft_code
    This question focuses on the API's available on phones. I'd been planning to use OpenAL in my game for maximum portability. It runs great on Linux so I can quickly develop the Game and leverage it's superior debugging tools. However I've recently heard that Android doesn't support OpenAL well. Instead they've gone with a OpenSL ES library. What I'm looking for is a free Audio library that I can use with minimal custom code on iPhone, Android, and my Linux desktop. Does such an API exists? Some extra details: The game is written in C++ with custom minimal front ends. ObjC for iPhone, Java for Android, and SFML for Desktops. I'm using OpenGL ES for portability as iPhone doesn't support the more advanced OpenGL APIs.

    Read the article

  • How to make a streaming server to stream media from computer to mobile phone in wifi?

    - by zkz
    Usually we have many HD movies in our computer, but we want to see them by our mobile phone. This requirement produces some questions: 1?the HD videos are too big to transfer to phone timely and it it hard to play on phone smoothly, so we have to transform the videos smaller and fit the screen of phone. 2?the coded format of the videos are varied, but limited types are supported by mobile phone, so we should transform the coded format to those supported by mobile phone. I've leaned the streaming media fit this problem, what I want is: 1?are there any good opensource projects fit this(ffmpeg?live555? darwin?)? 2?are they quick enough to transform coded format and transfer to mobile phone to play with no delay? Thank u very much!

    Read the article

  • Virtual audio driver for Windows?

    - by Ognjen
    Is there any (possibly free or open-source) virtual WDM audio driver for Windows, with additional processing plugins, which would add one more layer between windows applications and actual sound card's WDM audio driver, allowing to: Add software DSPs to general audio output. I would like to be able to use custom effects, like compressor, or stereophonic-to-binaural converter for listening online's streaming media on headphones, etc. Connect its output to some custom buffer instead of the sound card. For example, to be able to record audio, or to send audio via wireless connection to some other wireless source? Virtual audio driver was just my idea how to solve these issues - if you know other way, please share your knowledge. I need this for Windows 7 and/or Windows XP.

    Read the article

  • Audio doesn't work on Windows XP guest (WS 7.0)

    - by Mads
    I can't get audio to work with on a Windows XP guest running on VMware Workstation 7.0 and Ubuntu 9.10 host. Windows fails to produce any audio output and the Windows device manager says the Multimedia Audio Controller is not working properly. Audio is working fine in the host OS. When I open Multimedia Audio Controller properties it says: Device status: The drivers for this device are not installed (Code 28) If I try to reinstall the driver I get the following error message: Cannot Install this Hardware There was a problem installing this hardware: Multimedia Audio Controller An Error occurred during the installation of the device Driver is not intended for this platform Has anyone else experienced this problem?

    Read the article

  • Bluetooth Audio and SoftPhone Audio Input/Output

    - by o7th Web Design
    I have a Voip Softphone software that I would like to start using on my Ubuntu 14.04 box. Here's the thing. My system sound right now goes through my HDMI to my speaker system so I can play music all day ;-) I have a bluetooth headset connected to the machine as well. What I am wondering is if there is a way to: Auto-mute the music when a call comes in Auto-switch the sound devices when a call comes in, from my hdmi sound device, to my headset Auto-switch back when the call ends, and auto-un-mute the music Or even just an auto-switch to the headset? I can always pause the music ;)

    Read the article

  • iOS 5 Audio Alarms Don't Sound Without kAudioSessionProperty_OverrideCategoryMixWithOthers On

    - by coneybeare
    I have an audio app that is having some problems with the way iOS 5 has changed audio behaviors. When my app's audio is playing (AVAudioSessionCategoryPlayback), and a Clock.app alarm or timer is fired from the OS, the UIAlertView notification pops up, but without the audio alert. My application sound ducks fine to get out of the way of the audio alert, but the alarm app's audio alert does not sound. Naturally, tons of support requests poured in over the iOS 5 change. I have solved this temporarily by setting kAudioSessionProperty_OverrideCategoryMixWithOthers which lets the alarm audio come through, but there are a few very undesirable side-effects when doing this: Other app's audio can play with/over mine. The remote control events are not routed to my app, but to iPod.app. None of the above drawbacks are acceptable for my app's requirements. I have been hacking away at this for some time now but haven't been able to crack it. How can I setup my audio such that: My app's audio still uses the AVAudioSessionCategoryPlayback category for background audio. The Clock.app alarms still have their audio alerts make sound The app still responds to remote control notifications

    Read the article

  • Is it possible to play multiple audio streams from one "jukebox" to multiple Airport Express devices?

    - by Alex Reynolds
    I have set up a Mac mini as a jukebox that streams audio to an Airport Express in another room in the house, using the AirPlay/AirTunes feature in iTunes. I control this with the iOS Remote app, and this works great. At the present time, it looks like the Mac mini's copy of iTunes gets taken over by the Remote app, while streaming. If I set up a second Airport Express in room B, is there a way to set it up (as well as the jukebox) so that it can receive and play its own unique music stream ("stream B"), separate from what's going on at the Mac mini, or in room A, which is playing stream A? To accomplish this, I would be happy to buy a copy of Rogue Amoeba's AirFoil if it will allow sending multiple, separate audio streams from one computer to the multiple wireless bridges, while using the Remote app (or a Rogue Amoeba equivalent for iOS). However, it is unclear to me from their site documentation, whether that is possible or not. I'd prefer to give the points to an answer that solves this problem. If you don't know if it can be done, or do not think it can be done, please allow others to answer. I appreciate your help. Thanks for your advice.

    Read the article

  • Least CPU intensive way of streaming your screen on windows?

    - by sinni800
    Hello, sometimes I like capturing my screen for others to see. Only thing: I am playing games while I do it. I have tried a few streaming solutions where Windows Media Encoder coupled with my own Windows server appealed to me most, because I can change resolutions, etc. I also tried ustream coupled with the Flash applet and the Adobe Flash Encoder recording a Camtasia source. Camtasia has the disadvantage though that it shows the green-and-black-alternating borders and can not be targeted fullscreen. I like how xfire does it. But it doesn't work with every game, many are simply not supported. A few thoughts about this: Is there a program which captures like Fraps or XFire (based on Direct3D and OpenGL outputs) and exposes the output to a DirectShow source filter? Which brings me to: Is there hardware accelerated capturing directly from the graphics card? Maybe including direct encoding with help from OpenCL? Modern graphic cards decode BluRay content directly for example. I should have a modern enough graphics processor for this to be possible (see below). If using Windows Media Encoder: Which are the least CPU intensive settings? Which codec? Is there a newer codec than Windows Media 9? Is it less CPU intensive? I only have 7, 8 and 9 inside the Encoder Could the performance be massively increased by having a Quad-Core CPU (see below)? Bandwidth is no problem up to 1000 to 1500 kbit/s (I have 2048). My Computer specs: Intel Core 2 Duo E8400 4 GB DDR2-800 Ram Ati Radeon HD5770 Using Windows 7 Professional

    Read the article

  • Setup for a live (low-latency) audio video broadcast over Wi-Fi?

    - by Majal Mirasol
    The Upgrade We are capturing audio (from mixer) and video (from a camera) from a main auditorium and passing it to separate rooms within the building. We used to have done this via manual audio/video cables and wires. We wanted to "upgrade" the system and wirelessly broadcast the stream via Wi-Fi. The Problem In our current setup (Wirecast running on A10 on a Wireless-N network), we have the problem of delay. Our streams are delayed from a minute up to five minutes on the clients (laptop/iPad/Android). This had not been a problem from the previous wired connections. Since the wireless network is local, we thought that a delay of less than a second should be achievable. Our Question And so it goes. Anybody there who has any experience for a setup that has both low latency and at the same time user-friendly to clients streaming in the program? Any recommendations would be highly appreciated. (Our current setup in on Windows 7, but setup on a dedicated Linux box is preferred, if achievable.)

    Read the article

  • pitchbend (varispeed) audio with iPhone SDK's AudioUnit

    - by fetzig
    hi, I'm trying to manipulate the speed (and pitch) of a sound while playing. so i played around with iphone sdk's AudioUnit. downloaded iPhoneMultichannelMixerTest and tried to add an AUComponent to the graph (in this case a formatconverter). but i get (pretty soon) following error when building: #import <AudioToolbox/AudioToolbox.h> #import <AudioUnit/AudioUnit.h> ... AUComponentDescription varispeed_desc(kAudioUnitType_FormatConverter, kAudioUnitSubType_Varispeed, kAudioUnitManufacturer_Apple); ^^ error: 'kAudioUnitSubType_Varispeed' was not declared in this scope. any ideas why? the documentation on this topic doesn't help me at all (just api doc isn't very helpful when having no clue about the concept behind). there are no examples on how to wire these effects together and manipulating there properties...so maybe i'm totally wrong, anyway any hint is great. thx for help.

    Read the article

  • Can Flash player play .m3u audio files from a remote location

    - by undefined
    Is it possible to play a .m3u file streamed from a remote location through Flash Player in a browser? I have a player that loads and plays .mp3 files but also want to be able to play .m3u files. I have looked at the as3plsreader on google code but I think this is only for AIR and desktop files. anyone tried this or know where I should start looking for an answer? If I wasnt to use flash, what other ways could I get remote m3u files to play in a browser?

    Read the article

  • How can I get it the Free Music Archive audio player or is there a better alternative?

    - by Dennis Hodapp
    I'm looking at free streaming audio players for web browsers that I can use in a project. I really like the audio player used on http://freemusicarchive.org/. Are they using an open source audio player and can I get a hold of it? Or is it closed source? Also if there are any open-source audio players that anybody knows about I'd love to know about them (preferable to have one with no flash). Last thing...is HTML5 going to be able to replace audio streaming players?

    Read the article

  • Windows not remembering default audio device?

    - by Lynda
    I prefer the audio output on my computer to use the standard audio jack output due to volume issues. But I am using a monitor with HDMI. I have chosen to set the default audio device to be "Speakers" But every time I reboot the default audio device is the HDMI Output again. I am running Windows 7 64bit. Why does it not remember the default device? (I do shutdown and boot up properly without errors.)

    Read the article

  • No audio device detected

    - by Paul
    My computer has no audio. It says NO AUDIO DEVICE. I already installed Realtek AC97 and Realtek High Definition Audio Driver and I also pasted stream.dll to the Windows and system32 folders and I restarted my computer but it still says NO AUDIO DEVICE. Please help me. Thanks

    Read the article

  • ASUS N45SF - play subwoofer with audio connected

    - by Jaroslav Bucko
    I have notebook ASUS N45SF. It comes with dedicated subwoofer, which is connected to separate audio jack. When I connect any audio device to audio jack, internal speakers remain silent, but subwoofer too. I want to let subwoofer play even with audio device connected to jack. Are there any drivers or settings in OS, which would eneble this behaviour? I have Win7/Ubuntu dualboot so OS doesnt matter. Thanks

    Read the article

  • what is the best mid/high-end class audio/music creation audio sound card?

    - by Chris
    Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

    Read the article

  • If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

    - by Enigma
    Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >