Search Results

Search found 28350 results on 1134 pages for 'command switch'.

Page 7/1134 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • Getting packets from one port to another on a Dell PowerConnect 2824 switch

    - by Arvo Bowen
    I have a dell PowerConnect 2824 and I have a cat 5 cable connected from port 1 to port 23. Port 1 is reserved for VLAN 1 (the only VLAN that can manage the switch) and port 18-23 belong to VLAN 112. I currently have the switch setup with ip 10.71.3.5/27 and a test machine plugged into port 22 with IP address 10.71.3.30/27. For some reason I can not ping 10.71.3.5 from my test machine (10.71.3.30). Note: When I try to ping the server plugged into port 21 (IP: 10.71.3.7/27) also VLAN 112, I get responses just fine. Note: When I plug my test machine directly into port 1, I can ping 10.71.3.5 just fine. Quick Recap: Switch IP: 10.71.3.5 Port 1 - dedicated to management - (VLAN1) Port 21 - SERVER (10.71.3.7/27) - (VLAN112) Port 22 - test machine (10.71.3.30/27) - (VLAN112) Port 23 - dedicated to management (to hop over to VLAN 1 from VLAN 112) - (VLAN112)

    Read the article

  • dd-wrt switch for PfSense

    - by Kmao
    I currently have eth2 on my pfsense set up, and configured as 192.168.1.1, it has dhcp setup with allocation being 192.168.1.10 - 192.168.1.245. On my dd-wrt box, i disabled the WAN, and set it to act as a port for the switch. I disabled dhcp, dnsmasq, spi firewall, Wlan0 and set a static IP for the router being 192.168.1.10 Pfsense is plugged into lan0 and pc plugged into lan1 (wan port is empty) I have followed a few different guides, but i can't seem to get my router to act as a switch. Anyone have success using DD-WRT as a switch while using pfsense as your dhcp/dns/gateway. Any advice would help :)

    Read the article

  • Decent 1gb switch (16-24 port) for rack...

    - by TomTom
    Hallo, for a rack containing a smaller nubmer of servers (5 at the moment, going to stay in this area), I look to replace the currently aging 100mbit switch with a 1gb switch. This is for the backend between the servers. I expect some ISCIS traffic there ,so a 10gbit option would be nice (preferably for two ports, as extension modules). I dont need management, this is a pure backend of an internal cluster. I do VLAN, but there is no sensible management the switch can do there. I wuold like: * 1he only, obviously * preferable limited moving parts. * Low price ;) * Enough power to run at least half the ports in full speed at the same time. Anyone any recommendations?

    Read the article

  • switch duplicates packets and forward in two route

    - by sami
    there is a network including a router, two hosts and a switch which connects hosts to router. i have a virtual machine on my system. the network adapter is set to act as bridge. so the virtual machine and real OS are my 2 hosts on different LAN. they use one network card and are connected to a switch. when each of host send a packet to the other one, the switch duplicate the packet and forward it to both router and the other host. how can I solve the duplicate packet problem? Thanks.

    Read the article

  • Would a switch be covered by a router's firewall

    - by Uh-yeah...
    So... Hopefully; this is the right place for this question. I need more Ethernet ports on my home network. Sadly, we already have an old router connected to the main router and we still need more ports. I feel dumb for asking; but, I just would like to double check. Would the devices connected to the switch be "protected" by the Main router's firewall? ? Up to this point I have assumed that was the case; but, a co-worker is convinced that is not the case [ I believe he is thinking of a situation in which the switch (un-managed) is before an access point]. [It would go modem to main router; main router then has the switch and old router connected to it.

    Read the article

  • updatedb & locate command problem - Files from external hard drive are no longer indexed after rebooting

    - by user784637
    Files from my external hard drive are no longer indexed after rebooting. I have to remount and then run # updatedb after each reboot. The problem is updatedb takes a few minutes for my external hard drives. Is there any way I can retain indexing for my externals after I reboot so that the locate command can search through my externals? EDIT: Per Request here are my specs: $ cat /etc/updatedb.conf PRUNE_BIND_MOUNTS="yes" # PRUNENAMES=".git .bzr .hg .svn" PRUNEPATHS="/tmp /var/spool /media" PRUNEFS="NFS nfs nfs4 rpc_pipefs afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf fuse.glusterfs fuse.sshfs ecryptfs fusesmb devtmpfs" # mount /dev/sda5 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/me/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=me) /dev/sdb1 on /media/me type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sdd1 on /media/Little Boy type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sde1 on /media/Fat Man type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) # on_ac_power; echo $? 255

    Read the article

  • How is a switch statement better than a series of if statements? [closed]

    - by user1276078
    Possible Duplicate: Should I use switch statements or long if…else chains? I'm working on a small program that will conduct an Insertion Sort. A number will be inputted through the keyboard and stored in a variable I called "num." I've decided to use a switch statement in order to obtain the number inputted. switch( e.getKeyCode() ) { case KeyEvent.VK_0: num = 0; break; case KeyEvent.VK_1: num = 1; break; case KeyEvent.VK_2: num = 2; break; case KeyEvent.VK_3: num = 3; break; case KeyEvent.VK_4: num = 4; break; case KeyEvent.VK_5: num = 5; break; case KeyEvent.VK_6: num = 6; break; case KeyEvent.VK_7: num = 7; break; case KeyEvent.VK_8: num = 8; break; case KeyEvent.VK_9: num = 9; break; } I realized one other course of action could have been to use a set of if statements. if( e.getKeyCode() == KeyEvent.VK_0 ) num = 0; else if( e.getKeyCode() == KeyEvent.VK_1 ) num = 1; etc. for every number up until 9. I then wondered what the essential difference is between a switch statement and a series of if statements. I know it saves space and time to write, but it's not that much. So, my question is, aside from the space, does a switch statement differ from a series of if statments in any way? Is it faster, less error-prone, etc.? This question really doesn't affect my code that much. I was just wondering. Also, this question pertains to the JAVA language, not any other programming language.

    Read the article

  • Why don't languages use explicit fall-through on switch statements?

    - by zzzzBov
    I was reading Why do we have to use break in switch?, and it led me to wonder why implicit fall-through is allowed in some languages (such as PHP and JavaScript), while there is no support (AFAIK) for explicit fall-through. It's not like a new keyword would need to be created, as continue would be perfectly appropriate, and would solve any issues of ambiguity for whether the author meant for a case to fall through. The currently supported form is: switch (s) { case 1: ... break; case 2: ... //ambiguous, was break forgotten? case 3: ... break; default: ... break; } Whereas it would make sense for it to be written as: switch (s) { case 1: ... break; case 2: ... continue; //unambiguous, the author was explicit case 3: ... break; default: ... break; } For purposes of this question lets ignore the issue of whether or not fall-throughs are a good coding style. Are there any languages that exist that allow fall-through and have made it explicit? Are there any historical reasons that switch allows for implicit fall-through instead of explicit?

    Read the article

  • Ethernet switch capacity question

    - by Andrew Queisser
    We're looking at hooking up 48 small embedded systems with 10/100 Ethernet ports to an Ethernet switch and then have that switch talk to a server upstream via a faster connection. I have a couple of questions about that scenario: What kind of upstream connection is best (fiber, other?) Would it be reasonable to download 1GB/hour from each of the 48 systems concurrently? We'd be using some kind of TCP based protocol of our own design. Thanks, Andrew

    Read the article

  • Looking for a fiber optic "switch" or "router" for home use

    - by Shrout1
    The gist of my question: What is a "fiber optic" switch called? I.E. a layer 2 ethernet switch that uses fiber TX and RX connections and sends layer 2 network traffic between the fiber strands that are connected. Can someone purchase a dedicated fiber switch that does not have copper ethernet ports? What is the current average price of a device like this? Not necessarily looking for product endorsements, just information Might not make sense to go this route if it is too cost prohibitive What type of fiber connector is used for terminating a fiber strand into a jack on the wall? Can fiber be "patched" using two jacks and a "patch" cable? Is signal loss a concern with the longest runs at 100-200ft, a patch cable and media converters? The full story: My parents had unterminated fiber optic cable and terminated Cat5e run throughout their home when it was built in 2004. 10 years later the Cat5e isn't providing the throughput that my father needs to accomplish multiple streams of HD and fast system backups throughout the house. He can't reach gigabit speeds across the distance of the Cat5e runs. We are both interested in terminating the fiber connections and using them as high speed "backbones" to copper switches in each room of the house. It would be easy to attain gigabit speeds (or better, eventually) using the fiber. I have searched and searched for a "fiber optic switch" or "fiber optic router" and cannot find the correct term to describe this piece of hardware. We can use fiber media converters at the end points of each connection, however it would be nice to have a "patch panel" set up in the network closet in the basement that has fiber connections on it and switches the ethernet streams between the connections/systems in the house. Each fiber media converter costs between $50-$100 a piece... After 10 or so terminated connections it might make sense to find a piece of hardware that does not require media converters. That would depend upon the cost of this hardware Somewhat unrelated, if we are able to route between these fiber strands successfully, what is the physical connector type used in a jack on the wall? Just like RJ45 has a wall outlet (depicted below): What is the fiber optic equivalent of this? In the interim could we "patch" a couple fiber strands together in the network closet? Would signal loss be of concern with a run length of 100-200 feet, a patch cable and two media converters? If that would work then it could be used until the funds are available for more.

    Read the article

  • H/w suggestions for 24 port PoE switch.

    - by sunny
    Hi, I am looking for a 24 port PoE(IEEE 802.3af) switch to power some Snom phones that I have. Please suggest some appliances. I just need basic L2 functions and wouldn't want to go for a expensive Cisco switch. Here are my requirements: 1) IEEE 802.3af PoE 2) 802.1q VLAN 3) Full-Duplex I'd like a CLI also if possible, I've looked at Vyatta, but buying their 24 port appliance is way more expensive than a d-link or a netgear one. Thanks for your suggestions

    Read the article

  • Network Switch fast eneogh for Dlink DIR-655

    - by Recursion
    I am setting up a server and want to keep it outside of my local network which is inside of the Dlink 655 router. I originally bought the dlink router mainly because it is fast, much faster than any other consumer router I have tried. The only router which is capable of real 10MB/s d download speed. I need a switch which will not cause a bottle neck to the router. The switch will connect the to the server and the dlink router.

    Read the article

  • Can I connect two routers to one switch?

    - by vanneto
    I want to connect two routers to a switch which will then be connected to a modem. Now as far as I know a switch does not do network translation and this won't work with one IP address. So I bought two addresses at my ISP. Attached is a simple schematic that explains what I want to do. Is there any additional configuration needed on either of the routers (Linksys WRT54GL) to make this work or will it "Just Work"?

    Read the article

  • Installation of SAP Web Application Server 6.20 in Windows Vista

    - by karthikeyan b
    I tried installing trial version of sap netweaver 7.1 in windows vista in my laptop but i couldnt succeed there.. then i tried installing SAP WEB AS 6.20 now.I am able to succeed till 91% completion.After that i get some errors and the installation stops... if anybody have any experiences please share.it will be really helpful.I mentioned the complete log details below. nfo: INSTGUI.EXE Protocol version is 10. Message checksum is 7613888. Info: INSTGUI MessageFile Start message loading... Info: INSTGUI MessageFile Finished message loading. Info: InstController Prepare {} {} R3SETUP Version: Apr 24 2002 Info: InstController Prepare {} {} Logfile will be set to E:\R3SETUP\BSP.log Check E:\R3SETUP\BSP.log for further messages. Info: CommandFileController SyFileVersionSave {} {} Saving original content of file E:\R3SETUP\BSP.R3S ... Warning: CommandFileController SyFileCopy {} {} Function CopyFile() failed at location SyFileCopy-681 Warning: CommandFileController SyFileCopy {} {} errno: 5: Access is denied. Warning: CommandFileController SyFileCreateWithPermissions {} {} errno: 13: Permission denied Warning: CommandFileController SyPermissionSet {} {} Function SetNamedSecurityInfo() failed for E:\R3SETUP\BSP.R3S at location SyPermissionSet-2484 Warning: CommandFileController SyPermissionSet {} {} errno: 5: Access is denied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalColdKeyCheck 2 309 The CD DATA2 will not be copied. Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 checking host name lookup for 'Karthikeyan' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for 'Karthikeyan' is 'Karthikeyan'. Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 host 'Karthikeyan' has ip address '115.184.71.93' Info: CENTRDBINSTANCE_NT_ADA SyCheckHostnameLookup 2 333 offical host name for '115.184.71.93' is 'Karthikeyan'. Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Warning: ADADBINSTANCE_IND_ADA GetConfirmationFor 2 58 Cleanup database instance BSP for new installation. Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 54 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 54 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1146 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1146 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 718 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 718 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD KERNEL will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA1 will not be copied. Info: CDSERVERBASE InternalWarmKeyCheck 2 309 The CD DATA2 will not be copied. Info: InstController MakeStepsDeliver 2 309 Requesting Information on CD-ROMs Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 309 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 309 CommandFile could not be updated Info: CENTRDBINSTANCE_NT_ADA InternalWarmKeyCheck 2 333 The installation phase is starting now. Please look in the log file for further information about current actions. Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 99 Defining Key Values Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 99 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 99 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 58 Requesting Setup Details Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 58 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 58 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 333 Requesting Installation Details Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 333 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 333 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1206 Setting Users for Single DB landscape Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1206 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1206 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 75 Stopping the SAP DB Instance Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 75 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 75 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 247 Stopping the SAP DB remote server Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 247 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 247 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 1195 Can not read from Z:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: SAPDBSETCDPATH_IND_IND and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1195 Installing SAP DB Software Info: SAPDBINSTALL_IND_ADA SyCoprocessCreate 2 1195 Creating coprocess E:\sapdb\NT\I386\sdbinst.exe ... Info: SAPDBINSTALL_IND_ADA ExecuteDo 2 1195 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1195 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1195 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 120 Extracting SAP DB Tools Software Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Info: ADAEXTRACTLCTOOLS_NT_ADA SyCoprocessCreate 2 120 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 120 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 120 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: ADAEXTRACTBSPCFG SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 242 Starting VSERVER Info: ADAXSERVER_NT_ADA SyCoprocessCreate 2 242 Creating coprocess C:\sapdb\programs\bin\x_server.exe ... Info: ADAXSERVER_NT_ADA ExecuteDo 2 242 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 242 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 242 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA1 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from Y:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA2 and key: DATA1_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA2 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 816 Can not read from X:. Please ensure this path is accessible. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXEDBDATA3 and key: DATA2_LOCATION Info: InstController MakeStepsDeliver 2 816 Extracting the Database-Dependent SAP system Executables Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXEDBDATA3 SyCoprocessCreate 2 816 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 816 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 816 CommandFile could not be updated Warning: CDSERVERBASE ConfirmKey 2 815 We tried to find the label SAPDB:MINI-WAS-DEMO:620:KERNEL for CD KERNEL in path E:. But the check was not successfull. Info: LvKeyRequest For further information see HTML documentation: step: EXTRACTSAPEXE and key: KERNEL_LOCATION Info: InstController MakeStepsDeliver 2 815 Extracting the SAP Executables Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Info: EXTRACTSAPEXE SyCoprocessCreate 2 815 Creating coprocess SAPCAR ... Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 815 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 815 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 223 Setting new Rundirectory. Info: ADADBREGISTER_IND_ADA SyCoprocessCreate 2 223 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADADBREGISTER_IND_ADA ExecuteDo 2 223 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 223 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 223 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 ADASETDEVSPACES_IND_ADA Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 10 Performing Service BCHECK Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 10 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 10 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_DEFAULT_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_DEFAULT_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_COLD_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_COLD_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 263 Creating XUSER File for the User ADM for Dialog Instance Info: ADAXUSERSIDADM_WARM_NT_ADA SyCoprocessCreate 2 263 Creating coprocess C:\sapdb\programs\pgm\dbmcli.exe ... Info: ADAXUSERSIDADM_WARM_NT_ADA ExecuteDo 2 263 RC code form SyCoprocessWait = 0 . Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 263 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 263 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 760 Creating the Default Profile Info: DEFAULTPROFILE_IND_IND SyFileVersionSave 2 760 Saving original content of file C:\MiniWAS\DEFAULT.PFL ... Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 760 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 760 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1267 Modifying or Creating the TPPARAM File Info: TPPARAMMODIFY_NT_ADA SyFileVersionSave 2 1267 Saving original content of file C:\MiniWAS\trans\bin\TPPARAM ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1267 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1267 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1111 Creating the Service Entry for the Dispatcher Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Checking service name sapdp00, protocol tcp, port number 3200 ... Info: R3DISPATCHERPORT_IND_IND IaServicePortAppend 2 1111 Port name sapdp00 is known and the port number 3200 is equal to the existing port number 3200 Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1111 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1111 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1122 Creating the Service Entry for the Message Server Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Checking service name sapmsBSP, protocol tcp, port number 3600 ... Info: R3MESSAGEPORT_IND_IND IaServicePortAppend 2 1122 Port name sapmsBSP is known and the port number 3600 is equal to the existing port number 3600 Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1122 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1122 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1114 Creating the Service Entry for the Gateway Service Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Checking service name sapgw00, protocol tcp, port number 3300 ... Info: R3GATEWAYPORT_IND_IND IaServicePortAppend 2 1114 Port name sapgw00 is known and the port number 3300 is equal to the existing port number 3300 Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1114 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1114 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSP Info: PISTARTBSP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\Desktop. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 1 PISTARTBSPGROUP Info: PISTARTBSPGROUP SyDirCreate 2 1 Checking existence of directory C:\Users\Karthikeyan\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Mini SAP Web Application Server. If it does not exist creating it with user , group and permission 0 ... Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Error: CommandFileController StoreMasterTableFromCommandFile 2 1 Command file could not be opened. Error: CommandFileController SetKeytableForSect 2 1 CommandFile could not be updated Info: InstController MakeStepsDeliver 2 54 Starting SAP DB to Mode WARM Error: Command

    Read the article

  • Single-port 2600 router with 2900XL switch

    - by Slava Maslennikov
    I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

    Read the article

  • Why does Clang/LLVM warn me about using default in a switch statement where all enumerated cases are covered?

    - by Thomas Catterall
    Consider the following enum and switch statement: typedef enum { MaskValueUno, MaskValueDos } testingMask; void myFunction(testingMask theMask) { switch theMask { case MaskValueUno: {}// deal with it case MaskValueDos: {}// deal with it default: {} //deal with an unexpected or uninitialized value } }; I'm an Objective-C programmer, but I've written this in pure C for a wider audience. Clang/LLVM 4.1 with -Weverything warns me at the default line: Default label in switch which covers all enumeration values Now, I can sort of see why this is there: in a perfect world, the only values entering in the argument theMask would be in the enum, so no default is necessary. But what if some hack comes along and throws an uninitialized int into my beautiful function? My function will be provided as a drop in library, and I have no control over what could go in there. Using default is a very neat way of handling this. Why do the LLVM gods deem this behaviour unworthy of their infernal device? Should I be preceding this by an if statement to check the argument?

    Read the article

  • 12.10 starts up to just my desktop background [closed]

    - by Alex
    Possible Duplicate: Unity does not start after installing the fglrx drivers on 12.10 I have only just started using linux more than just instlling it on an old pc for fun and have just changed the driver settings from the default option. The computer starts up and goes through everything else well, but at slightly lower resolution. Once signing on to Ubuntu, it only displays my desktop background and cursor. Can i restore it to the default driver settings? I've spent a while transferring files and don't want to reinstall Ubuntu.

    Read the article

  • Can't Configure IBM 8275-416 Switch Via Serial

    - by Sean M
    I am attempting to configure an IBM 8275-416 switch (I found a manual here) via serial connection. However, when I connect with HyperTerminal, the output contains a lot of garbage characters. It's pretty much unusable, because there's enough layout-breaking text-gunk that it's very difficult to determine what's actually being displayed. . I was able to reset the switch to factory defaults via the terminal interface, so I know that it's not entirely broken. It also performs basic functions all right (i.e., you plug in clients and Ethernet cables - they can connect to clients plugged into other ports) - but I'd like it to do more than that (VLANs yay). I don't know if its in-band UI is operational or not, because I can't get the terminal interface to behave well enough to properly turn on the web/SNMP UI. So that's not available. Things I've tried: - Changing the encoding: HyperTerminal lets me choose between Standard JIS and Shift-JIS. Neither setting fixes the issue. - Checking emulation settings: The manual demands VT100, 19200 baud, 8 data bits, and such: I have faithfully applied these settings, both in HyperTerminal's settings and in the properties of the COM1 port in Device Manager (connecting from a Windows machine). - Restoring to factory defaults: See above. Things that it could be, but that seem unlikely: - Cabling: Couldn't find a proper null-modem cable, so used two 232-to-RJ45 adapters. But if it was a problem with the cable, wouldn't it be more likely to not connect or do input at all, rather than just garble the text? Since I was actually able to perform the reset-to-factory defaults operation, I don't think it's this. - Device as a whole broken: It is a decade and change old, so it's possible that it's just dying slowly. Again, though, it seems like there would be more symptoms than just garbled text in the terminal. What else can I try to get a sane interface to this switch?

    Read the article

  • Windows mounted network drives slow after upgrading switch

    - by Kver
    On our small business network our old 10/100 consumer grade switch gave up the ghost, and we replaced it with a proper business-grade gigabyte switch. After wiring it in our Linux and Mac users immediately got back to working off of network drives; But 2 of our 3 Windows 7 PCs have suddenly experienced a tremendous slowdown with mapped network drives; Windows will become stuck "discovering" a folder causing applications to freeze when trying to open files. It will instantly display and browse files, but the moment you try to open one the bug hits. To remedy this we have our users copying files to the desktop, but it can take a few minutes while windows is stuck "calculating" the time it will take to copy. These aren't big files, mostly excel sheets less than 500KB - these operations are instant on Linux and Mac. (The third Windows machine is having no issues) I've tried remapping the drives, mapping to different drive letters, rebooting, etc. I'm at a loss, because switches are mostly transparent, and it's only after the switch was replaced that the Windows PCs started acting up. What black-magic voodoo am I missing to make Windows work? Thank you.

    Read the article

  • Show command prompt on reboot

    - by LinuxPenseur
    Hi, In one of my linux machines, when i give reboot command at the shell command prompt then press enter, i get another command prompt and then the system reboots. $reboot $ But in one of my office Linux machines, when i give the reboot command, it suddenly reboots without showing another shell command prompt What could be the reason for this? I need the first behavior to be present in my office machine also. Kindly tell me where i should tweak my office machine. Thanks

    Read the article

  • Awk command to print all the lines except the last three lines

    - by Avinash Raj
    I want to print all the lines except the last three lines from the input through awk only. Please note that my file contains n number of lines. For example, file.txt contains, foo bar foobar barfoo last line I want the output to be, foo bar foobar I know it could be possible through the combination of tac and sed or tac and awk $ tac file | sed '1,3d' | tac foo bar foobar $ tac file | awk 'NR==1{next}NR==2{next}NR==3{next}1' | tac foo bar foobar But i want the output through awk only.

    Read the article

  • How to get working cups command line tools on Server 14.04

    - by Nick
    It looks like some of the commands like lpr and lprm have broken versions that don't work with cups. These commands worked properly on 10.04. lpr for cups has an -o option, but no lpr is intalled when cups is installed, and the lpr installed with apt-get install lpr does not have the -o option and does not appear to be the cups version of lpr. man lpr shows BSD General Commands Manual at the top, where man lpr on the Ubuntu 10.04 server said Apple, inc in the same spot. which leads me to believe the "wrong" lpr is in the "lpr" package or package names got moved around. There is also a lprng package, but trying to install it wants to remove cups and cups-client. lprm also returns lprm: PrinterName: unknown printer when PrinterName is in fact a valid printer installed with cups and does appear in lpstat -t. How do I get the proper cups versions of lpr working on Server 14.04?

    Read the article

  • Command line options style - POSIX or what?

    - by maaartinus
    Somewhere I saw a rant against java/javac allegedly using a mix of Windows and Unix style like java -classpath ... -ea ... Something IMHO, it is no mix, it's just like find works as well, isn't it? AFAIK, according to POSIX, the syntax should be like java --classpath ... --ea ... Something and -abcdef would mean specifying 6 short options at once. I wonder which version leads in general to less typing and less errors. I'm writing a small utility in Java and in no case I'm going to use Windows style /a /b since I'm interested primarily in Unix. What style should I choose?

    Read the article

  • A program/command to help translate multiple file names

    - by cipricus
    I have hundreds of files with different names that I want to translate into a different language. Is there an application/CLI action that would allow me to copy all this names as in a list/table and then, after having translated them, to paste them back into the list/table, or that would allow a procedure somewhat similar to "Rename" in Thunar but with a more complex action closer to what I have described? (I am in Lubuntu and I prefer not to use Nautilus due to unwanted interference with LXDE/pcmanfm desktop and LXPanel. If there is a solution in Nautilus please provide it but try to give an alternative if possible.)

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >