Search Results

Search found 1073 results on 43 pages for 'firmware'.

Page 7/43 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • RTL8188CE doesn't connect to any wifi access points

    - by Drakmail
    I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

    Read the article

  • Dell Vostro 3560 bluetooth doesn't work

    - by Shein
    I installed the wireless driver using this instruction How do I install BCM43142 wireless drivers for Dell Vostro 3460/3560 and I have WiFi working. No problems here. But unfortunately the bluetooth doesn't work. The ubuntu bar shows the bluetooth sign and I can turn the bluetooth on/off but I can't discover any devices. And I can't find my laptop when I turn visibility On. So, obviously bluetooth doesn't work. I couldn't find the reports that blutooth can actually work with this adapter in Ubuntu. So, my question is: Is there anyone with BCM43142 adapter that have bluetooth working? Thank You in advance. PS. Ubuntu 12.10 x64 Update: After some fiddling around with different drivers from different sources I managed to get bluetooth working. Not flawlessly but at least I can pair a device. Bluetooth started working after installation of this package bt-bcm43142-onereic_0.0+20111116somerville2_amd64.deb Originally I found this package on the disk with Ubuntu which came with the Laptop. What this package does, it installs a firmware loader and a firmware itself. This firmware needs to get bluetooth working. Still bluetooth sometimes doesn't work even with this package. But manual loading the firmware helps. brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 Also I found it strange that this package writes all different ids into /sys/bus/usb/drivers/btusb/new_id because only one from the list matches my device ID bcm43142.conf: install btusb /sbin/modprobe --ignore-install btusb && echo '0a5c 21d3' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21d7' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e1' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e3' > /sys/bus/usb/drivers/btusb/new_id && hciconfig hci0 up && /usr/bin/brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 & My lsusb: ... Bus 002 Device 003: ID 0a5c:21d7 Broadcom Corp. In conclusion: bluetooth works not nearly as good as in windows :( once I even got a complete crash of the system because of the btusb module. Luckily WiFi works perfectly :)

    Read the article

  • Pluscom MAC address shows up but "wireless unavailable"

    - by Luigi
    I've got a pluscom pci card plugged into my desktop and although the mac address shows up in network manager, it says "Wireless unavailable". I'm using Ubuntu 12.10 Gnome Shell Remix... edgar@edgarQuantal:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off edgar@edgarQuantal:~$ ifconfig eth0 Link encap:Ethernet HWaddr 6c:f0:49:02:1f:b8 inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fe02:1fb8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1425 errors:0 dropped:0 overruns:0 frame:0 TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:995753 (995.7 KB) TX bytes:134079 (134.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:363 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:40828 (40.8 KB) TX bytes:40828 (40.8 KB) It looks the same as the problem as here, seems quite complicated: http://ubuntuforums.org/showthread.php?t=1993226 Tried downloading the driver but i get this: "Unpacking firmware-ralink (from .../firmware-ralink_0.36_all.deb) ... dpkg: error processing /home/edgar/Downloads/firmware-ralink_0.36_all.deb (--install): trying to overwrite '/lib/firmware/rt2870.bin', which is also in package linux-firmware 1.95"

    Read the article

  • Swapping 3Ware Raid Card - Best Procedure

    - by Brian Lee Jackson
    We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

    Read the article

  • Broadcom brcm80211 installation from source

    - by calmpitbull
    Hello need help to get my wifi chipset working.I have brcmsmac driver and i would like to have brcm80211 chipset up and running. I have tried everything but nothing helped? git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git Copy brcm/bcm43xx-0.fw and brcm/bcm43xx_hdr-0.fw to /lib/firmware/brcm (or wherever firmware is normally installed on your system). still got brcmsmac ?? then i tryed git clone git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git clone git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git cd ~/linux-next/drivers/staging/brcm80211 nano Makefile the problem is that there is no brcm82011 folder?? do i follow cd ~/linux-next-a694cb1 like the link sad? i have Broadcom Corporation BCM4313 [14e4:4727]

    Read the article

  • Proliant server will not accept new hard disks in RAID 1+0?

    - by Leigh
    I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

    Read the article

  • Appropriate design / technologies to handle dynamic string formatting?

    - by Mark W
    recently I was tasked with implementing a way of adding support for versioning of hardware packet specifications to one of our libraries. First a bit of information about the project. We have a hardware library which has classes for each of the various commands we support sending to our hardware. These hardware modules are essentially just lights with a few buttons, and a 2 or 4 digit display. The packets typically follow the format {SOH}AADD{ETX}, where AA is our sentinel action code, and DD is the device ID. These packet specs are different from one command to the next obviously, and the different firmware versions we have support different specifications. For example, on version 1 an action code of 14 may have a spec of {SOH}AADDTEXT{ETX} which would be AA = 14 literal, DD = device ID, TEXT = literal text to display on the device. Then we come out with a revision with adds an extended byte(s) onto the end of the packet like this {SOH}AADDTEXTE{ETX}. Assume the TEXT field is fixed width for this example. We have now added a new field onto the end which could be used to say specify the color or flash rate of the text/buttons. Currently this java library only supports one version of the commands, the latest. In our hardware library we would have a class for this command, say a DisplayTextArgs.java. That class would have fields for the device ID, the text, and the extended byte. The command class would expose a method which generates the string ("{SOH}AADDTEXTE{ETX}") using the value from the class. In practice we would create the Args class as needed, populate the fields, call the method to get our packet string, then ship that down across the CAN. Some of our other commands specification can vary for the same command, on the same version, depending on some runtime state. For example, another command for version 1 may be {SOH}AA{ETX}, where this action code clears all of the modules behind a specific controller device of their text. We may overload this packet to have option fields with multiple meanings like {SOH}AAOC{ETX} where OC is literal text, which tells the controller to only clear text on a specific module type, and to leave the others alone, or the spec could also have an option format of {SOH}AADD{ETX} to clear the text off a a specific device. Currently, in the method which generates the packet string, we would evaluate fields on the args class to determine which spec we will be using when formatting the packet. For this example, it would be along the lines of: if m_DeviceID != null then use {SOH}AADD{ETX} else if m_ClearOCs == true then use {SOH}AAOC{EXT} else use {SOH}AA{ETX} I had considered using XML, or a database to store String.format format strings, which were linked to firmware version numbers in some table. We would load them up at startup, and pass in the version number of the hardwares firmware we are currently using (I can query the devices for their firmware version, but the version is not included in all packets as part of the spec). This breaks down pretty quickly because of the dynamic nature of how we select which version of the command to use. I then considered using a rule engine to possibly build out expressions which could be interpreted at runtume, to evaluate the args class's state, and from that select the appropriate format string to use, but my brief look at rule engines for java scared me away with its complexity. While it seems like it might be a viable solution, it seems overly complex. So this is why I am here. I wouldn't say design is my strongest skill, and im having trouble figuring out the best way to approach this problem. I probably wont be able to radically change the args classes, but if the trade off was good enough, I may be able to convince my boss that the change is appropriate. What I would like from the community is some feedback on some best practices / design methodologies / API or other resources which I could use to accomplish: Logic to determine which set of commands to use for a given firmware version Of those command, which version of each command to use (based on the args classes state) Keep the rules logic decoupled from the application so as to avoid needing releases for every firmware version Be simple enough so I don't need weeks of study and trial and error to implement effectively.

    Read the article

  • YUM Update Failed - Error in POSTIN scriptlet in rpm package

    - by Tiffany Walker
    Running "yum update" and it gets to installing and then breaks. Not sure what the problem is. Google shows nothing. Error in POSTIN scriptlet in rpm package gtk2-2.18.9-10.el6.x86_64 error: error creating temporary file /var/tmp/rpm-tmp.NB84HC: Invalid argument error: Couldn't create temporary file for %post(gtk2-2.18.9-10.el6.x86_64): Invalid argument Updating : e2fsprogs-libs-1.41.12-12.el6.x86_64 44/378 Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/yum/rpmtrans.py", line 387, in callback self._instCloseFile( bytes, total, h ) File "/usr/lib/python2.6/site-packages/yum/rpmtrans.py", line 463, in _instCloseFile self.base.history.trans_data_pid_end(pid, state) File "/usr/lib/python2.6/site-packages/yum/history.py", line 858, in trans_data_pid_end """, ('TRUE', self._tid, pid, state)) File "/usr/lib/python2.6/site-packages/yum/sqlutils.py", line 168, in executeSQLQmark return cursor.execute(query, params) sqlite3.OperationalError: unable to open database file error: python callback <bound method RPMTransaction.callback of <yum.rpmtrans.RPMTransaction instance at 0x45c2290>> failed, aborting! With a check all: yum check Loaded plugins: fastestmirror, rhnplugin, security MySQL-client-5.5.27-1.cp.1132.x86_64 is obsoleted by MySQL-client-5.5.27-1.cp.1132.x86_64 MySQL-server-5.5.27-1.cp.1132.x86_64 is obsoleted by MySQL-server-5.5.27-1.cp.1132.x86_64 abrt-libs-2.0.8-6.el6.x86_64 is a duplicate with abrt-libs-2.0.4-14.el6.centos.x86_64 audit-libs-2.2-2.el6.x86_64 is a duplicate with audit-libs-2.1.3-3.el6.x86_64 bandmin-1.6.1-5.noarch has missing requires of perl(bandmin.conf) bandmin-1.6.1-5.noarch has missing requires of perl(bmversion.pl) bandmin-1.6.1-5.noarch has missing requires of perl(services.conf) 32:bind-libs-9.8.2-0.10.rc1.el6_3.3.x86_64 is a duplicate with 32:bind-libs-9.7.3-8.P3.el6_2.2.x86_64 cagefs-safebin-3.6-6.el6.cloudlinux.x86_64 is a duplicate with cagefs-safebin-3.5-1.el6.cloudlinux.x86_64 chkconfig-1.3.49.3-2.el6.x86_64 is a duplicate with chkconfig-1.3.49.3-1.el6_2.x86_64 cloudlinux-release-6-6.3.0.x86_64 is a duplicate with cloudlinux-release-6-6.2.2.x86_64 coreutils-8.4-19.el6.x86_64 is a duplicate with coreutils-8.4-16.el6.x86_64 coreutils-libs-8.4-19.el6.x86_64 is a duplicate with coreutils-libs-8.4-16.el6.x86_64 1:cups-libs-1.4.2-48.el6_3.1.x86_64 is a duplicate with 1:cups-libs-1.4.2-44.el6_2.3.x86_64 1:dbus-libs-1.2.24-7.el6_3.x86_64 is a duplicate with 1:dbus-libs-1.2.24-5.el6_1.x86_64 12:dhcp-common-4.1.1-31.P1.el6_3.1.x86_64 is a duplicate with 12:dhcp-common-4.1.1-25.P1.el6_2.1.x86_64 e2fsprogs-libs-1.41.12-12.el6.x86_64 is a duplicate with e2fsprogs-libs-1.41.12-11.el6.x86_64 exim-4.80-0.x86_64 has missing requires of perl(SafeFile) expat-2.0.1-11.el6_2.x86_64 is a duplicate with expat-2.0.1-9.1.el6.x86_64 frontpage-2002-SR1.2.i386 has missing requires of libexpat.so.0 gawk-3.1.7-10.el6.x86_64 is a duplicate with gawk-3.1.7-9.el6.x86_64 glib2-2.22.5-7.el6.x86_64 is a duplicate with glib2-2.22.5-6.el6.x86_64 glibc-2.12-1.80.el6_3.5.x86_64 is a duplicate with glibc-2.12-1.47.el6_2.12.x86_64 glibc-common-2.12-1.80.el6_3.5.x86_64 is a duplicate with glibc-common-2.12-1.47.el6_2.12.x86_64 gtk2-2.18.9-10.el6.x86_64 is a duplicate with gtk2-2.18.9-6.el6.centos.x86_64 kernel-firmware-2.6.32-320.4.1.lve1.1.4.el6.noarch is obsoleted by kernel-firmware-2.6.32-320.4.1.lve1.1.4.el6.noarch kernel-firmware-2.6.32-320.4.1.lve1.1.4.el6.noarch is obsoleted by kernel-firmware-2.6.32-379.5.1.lve1.1.9.6.1.el6.noarch kernel-firmware-2.6.32-379.5.1.lve1.1.9.6.1.el6.noarch is a duplicate with kernel-firmware-2.6.32-320.4.1.lve1.1.4.el6.noarch kernel-firmware-2.6.32-379.5.1.lve1.1.9.6.1.el6.noarch is obsoleted by kernel-firmware-2.6.32-320.4.1.lve1.1.4.el6.noarch kernel-firmware-2.6.32-379.5.1.lve1.1.9.6.1.el6.noarch is obsoleted by kernel-firmware-2.6.32-379.5.1.lve1.1.9.6.1.el6.noarch kernel-headers-2.6.32-379.5.1.lve1.1.9.6.1.el6.x86_64 is a duplicate with kernel-headers-2.6.32-320.4.1.lve1.1.4.el6.x86_64 keyutils-libs-1.4-4.el6.x86_64 is a duplicate with keyutils-libs-1.4-3.el6.x86_64 krb5-libs-1.9-33.el6_3.3.x86_64 is a duplicate with krb5-libs-1.9-22.el6_2.1.x86_64 libblkid-2.17.2-12.7.el6.x86_64 is a duplicate with libblkid-2.17.2-12.4.el6.x86_64 libcom_err-1.41.12-12.el6.x86_64 is a duplicate with libcom_err-1.41.12-11.el6.x86_64 libgcc-4.4.6-4.el6.x86_64 is a duplicate with libgcc-4.4.6-3.el6.x86_64 libselinux-2.0.94-5.3.el6.x86_64 is a duplicate with libselinux-2.0.94-5.2.el6.x86_64 libstdc++-4.4.6-4.el6.x86_64 is a duplicate with libstdc++-4.4.6-3.el6.x86_64 libtiff-3.9.4-6.el6_3.x86_64 is a duplicate with libtiff-3.9.4-5.el6_2.x86_64 libudev-147-2.42.el6.x86_64 is a duplicate with libudev-147-2.40.el6.x86_64 libuuid-2.17.2-12.7.el6.x86_64 is a duplicate with libuuid-2.17.2-12.4.el6.x86_64 libxml2-2.7.6-8.el6_3.3.x86_64 is a duplicate with libxml2-2.7.6-4.el6_2.4.x86_64 nspr-4.9.1-2.el6_3.x86_64 is a duplicate with nspr-4.8.9-3.el6_2.x86_64 nss-util-3.13.5-1.el6_3.x86_64 is a duplicate with nss-util-3.13.1-3.el6_2.x86_64 openssl-1.0.0-25.el6_3.1.x86_64 is a duplicate with openssl-1.0.0-20.el6_2.5.x86_64 python-2.6.6-29.el6_3.3.x86_64 is a duplicate with python-2.6.6-29.el6.x86_64 python-libs-2.6.6-29.el6_3.3.x86_64 is a duplicate with python-libs-2.6.6-29.el6.x86_64 readline-6.0-4.el6.x86_64 is a duplicate with readline-6.0-3.el6.x86_64 sed-4.2.1-10.el6.x86_64 is a duplicate with sed-4.2.1-7.el6.x86_64 tzdata-2012c-3.el6.noarch is a duplicate with tzdata-2012c-1.el6.noarch xmlrpc-c-1.16.24-1209.1840.el6.x86_64 is a duplicate with xmlrpc-c-1.16.24-1200.1840.el6_1.4.x86_64 xmlrpc-c-client-1.16.24-1209.1840.el6.x86_64 is a duplicate with xmlrpc-c-client-1.16.24-1200.1840.el6_1.4.x86_64 Error: check all Tried: #rm /var/lib/rpm/__db* #rpm --rebuilddb #yum clean all Tried also running yum-complete-transaction still won't finish the update. ls -ld /var/tmp/ drwxrwxrwt. 20 root root 12288 Oct 3 18:44 /var/tmp/ df -h /var/tmp/ Filesystem Size Used Avail Use% Mounted on /tmp 3.9G 1.2G 2.6G 32% /var/tmp Latest errors: Error: Protected multilib versions: libgcc-4.4.6-4.el6.i686 != libgcc-4.4.6-3.el6.x86_64 Error: Protected multilib versions: glibc-2.12-1.80.el6_3.5.i686 != glibc-2.12-1.47.el6_2.12.x86_64 EDITED: yum repolist Loaded plugins: fastestmirror, rhnplugin, security Loading mirror speeds from cached hostfile * cloudlinux-x86_64-server-6: cl.banahosting.com repo id repo name status cloudlinux-x86_64-server-6 CloudLinux Server 6 x86_64 10,948+725 repolist: 10,948 [~]# package-cleanup --dupes Loaded plugins: fastestmirror, rhnplugin xmlrpc-c-client-1.16.24-1209.1840.el6.x86_64 xmlrpc-c-client-1.16.24-1200.1840.el6_1.4.x86_64 bind-libs-9.7.3-8.P3.el6_2.2.x86_64 bind-libs-9.8.2-0.10.rc1.el6_3.3.x86_64 libblkid-2.17.2-12.4.el6.x86_64 libblkid-2.17.2-12.7.el6.x86_64 libtiff-3.9.4-5.el6_2.x86_64 libtiff-3.9.4-6.el6_3.x86_64 audit-libs-2.1.3-3.el6.x86_64 audit-libs-2.2-2.el6.x86_64 libstdc++-4.4.6-3.el6.x86_64 libstdc++-4.4.6-4.el6.x86_64 sed-4.2.1-10.el6.x86_64 sed-4.2.1-7.el6.x86_64 python-libs-2.6.6-29.el6_3.3.x86_64 python-libs-2.6.6-29.el6.x86_64 coreutils-libs-8.4-16.el6.x86_64 coreutils-libs-8.4-19.el6.x86_64 libudev-147-2.40.el6.x86_64 libudev-147-2.42.el6.x86_64 chkconfig-1.3.49.3-2.el6.x86_64 chkconfig-1.3.49.3-1.el6_2.x86_64 keyutils-libs-1.4-4.el6.x86_64 keyutils-libs-1.4-3.el6.x86_64 glibc-2.12-1.47.el6_2.12.x86_64 glibc-2.12-1.80.el6_3.5.x86_64 tzdata-2012c-3.el6.noarch tzdata-2012c-1.el6.noarch coreutils-8.4-19.el6.x86_64 coreutils-8.4-16.el6.x86_64 dbus-libs-1.2.24-7.el6_3.x86_64 dbus-libs-1.2.24-5.el6_1.x86_64 libxml2-2.7.6-4.el6_2.4.x86_64 libxml2-2.7.6-8.el6_3.3.x86_64 abrt-libs-2.0.8-6.el6.x86_64 abrt-libs-2.0.4-14.el6.centos.x86_64 expat-2.0.1-9.1.el6.x86_64 expat-2.0.1-11.el6_2.x86_64 python-2.6.6-29.el6.x86_64 python-2.6.6-29.el6_3.3.x86_64 gtk2-2.18.9-6.el6.centos.x86_64 gtk2-2.18.9-10.el6.x86_64 libcom_err-1.41.12-12.el6.x86_64 libcom_err-1.41.12-11.el6.x86_64 gawk-3.1.7-10.el6.x86_64 gawk-3.1.7-9.el6.x86_64 readline-6.0-4.el6.x86_64 readline-6.0-3.el6.x86_64 glibc-common-2.12-1.80.el6_3.5.x86_64 glibc-common-2.12-1.47.el6_2.12.x86_64 libselinux-2.0.94-5.2.el6.x86_64 libselinux-2.0.94-5.3.el6.x86_64 cups-libs-1.4.2-48.el6_3.1.x86_64 cups-libs-1.4.2-44.el6_2.3.x86_64 nspr-4.9.1-2.el6_3.x86_64 nspr-4.8.9-3.el6_2.x86_64 cagefs-safebin-3.5-1.el6.cloudlinux.x86_64 cagefs-safebin-3.6-6.el6.cloudlinux.x86_64 libuuid-2.17.2-12.4.el6.x86_64 libuuid-2.17.2-12.7.el6.x86_64 xmlrpc-c-1.16.24-1209.1840.el6.x86_64 xmlrpc-c-1.16.24-1200.1840.el6_1.4.x86_64 openssl-1.0.0-20.el6_2.5.x86_64 openssl-1.0.0-25.el6_3.1.x86_64 dhcp-common-4.1.1-25.P1.el6_2.1.x86_64 dhcp-common-4.1.1-31.P1.el6_3.1.x86_64 krb5-libs-1.9-33.el6_3.3.x86_64 krb5-libs-1.9-22.el6_2.1.x86_64 nss-util-3.13.5-1.el6_3.x86_64 nss-util-3.13.1-3.el6_2.x86_64 cloudlinux-release-6-6.2.2.x86_64 cloudlinux-release-6-6.3.0.x86_64 e2fsprogs-libs-1.41.12-11.el6.x86_64 e2fsprogs-libs-1.41.12-12.el6.x86_64 glib2-2.22.5-6.el6.x86_64 glib2-2.22.5-7.el6.x86_64 UPDATE 2 I removed all the dupes and then did update and got this: Updating : sudo-1.7.4p5-13.el6_3.x86_64 79/361 Error in POSTIN scriptlet in rpm package sudo-1.7.4p5-13.el6_3.x86_64 warning: /etc/sudoers created as /etc/sudoers.rpmnew error: error creating temporary file /var/tmp/rpm-tmp.hjTOqJ: Invalid argument error: Couldn't create temporary file for %post(sudo-1.7.4p5-13.el6_3.x86_64): Invalid argument Updating : pcre-7.8-6.el6.x86_64 80/361 Traceback (most recent call last): File "/usr/lib/python2.6/site-packages/yum/rpmtrans.py", line 399, in callback self._instCloseFile( bytes, total, h ) File "/usr/lib/python2.6/site-packages/yum/rpmtrans.py", line 475, in _instCloseFile self.base.history.trans_data_pid_end(pid, state) File "/usr/lib/python2.6/site-packages/yum/history.py", line 858, in trans_data_pid_end """, ('TRUE', self._tid, pid, state)) File "/usr/lib/python2.6/site-packages/yum/sqlutils.py", line 168, in executeSQLQmark return cursor.execute(query, params) sqlite3.OperationalError: unable to open database file error: python callback <bound method RPMTransaction.callback of <yum.rpmtrans.RPMTransaction instance at 0x5c7cfc8>> failed, aborting! - [~]# lsattr /var/tmp/ -------------e- /var/tmp/cache_5b07945563e03aec1c44917886fd99a6 -------------e- /var/tmp/sess_6edfafda1a191f6986bd020ed945eea0 -------------e- /var/tmp/sess_1b837feecdd4c9e6aa6ecd81d41fda75 -------------e- /var/tmp/sess_70bec5f392b4f5f75ac444f5c82db2dc -------------e- /var/tmp/sess_24cd226ba0a370a6d3838a37745b2e15 -------------e- /var/tmp/nginx_proxy -------------e- /var/tmp/sess_19fb1dd060e42c9de8786ef34d7fcf6e -------------e- /var/tmp/sess_b4ac777076c5122a6e27d776de0a2fcb -------------e- /var/tmp/sess_5077441775ef8d07a2185e8fd48a4aa8 -------------e- /var/tmp/cache_4e71d930fe8250e222ae4d1dc39646ff -------------e- /var/tmp/sess_eb6eb29b38b55b85303c3137611f0a2faa15c21d -------------e- /var/tmp/sess_81e7e8d93b395f2c8d7e3fe12cc59e56 -------------e- /var/tmp/sess_05c7f305bdbf9a4c7af251d33ac59766 -------------e- /var/tmp/sess_0ad9369063a37b6b399688a835d69ed2 -------------e- /var/tmp/cache_c780deda617678faeea8f8a34395ac27 -------------e- /var/tmp/sess_9773332e3c99ee18dca0b05e8f02a41e -------------e- /var/tmp/sess_1d9b02b068ea81a3975599ddc12bcfb1 -------------e- /var/tmp/sess_1ffeff444123e924834dc5e80d07571e -------------e- /var/tmp/sess_aa56725471c84d9a06745c56dc499db7 -------------e- /var/tmp/sess_51e19964d7e1a164c63f4c72fa43475c33debbc0 -------------e- /var/tmp/sess_a83c7a05bb189a465b8813ff9e566aa8f9124079 -------------e- /var/tmp/sess_2f506ba5b77c61107871e8cf80393cdb -------------e- /var/tmp/sess_7bfe1578605b259ec5e4fd2200df4cd0 -------------e- /var/tmp/sess_f6e47011789d8d48d56dd78a398d98d5719414a7 -------------e- /var/tmp/sess_b7c43a90a8b8d8f02b0fffca77796ce5 -------------e- /var/tmp/sess_6c3e7103453ad4daba815bd96a903785 -------------e- /var/tmp/sess_86f32a22507d8410b3f0fc7d71a135d5 -------------e- /var/tmp/sess_aaf72d3e8cfb2f27ffdff61323f97e7553855a05 -------------e- /var/tmp/sess_5de4488e2ee03ac0f99ab9494573ccb1 -------------e- /var/tmp/sess_716d97bba4abdb38704a9e4212f6fddc -------------e- /var/tmp/sess_534908a9510a32eda13a5dc95ac022cc -------------e- /var/tmp/sess_626a58203d93427c79621ea4fec0906d -------------e- /var/tmp/sess_827ca92d10d3797f2c187c41764a7036 -------------e- /var/tmp/sess_6282962d77f7bead20e785fbdb9a3d8f -------------e- /var/tmp/cache_b012c8a729fc54a296a700ed92930a0e -------------e- /var/tmp/sess_631e5ba769773da056108d3fbd143963 -------------e- /var/tmp/cache_30bb7f1333ba5f96a229c91a3385d8b5 -------------e- /var/tmp/sess_93e085706b29c3e4e3593bfe39b1079e -------------e- /var/tmp/sess_abd78bd6c285d681c90de8c617747ab3 -------------e- /var/tmp/sess_e144544ed925569018e6607b05f43f253f75e2aa -------------e- /var/tmp/sess_5d3d036c772847a4508d3e100b173d84 -------------e- /var/tmp/sess_f35243d1f40bd8d9ce08940fafc00d93 -------------e- /var/tmp/sess_761c3ffa811b959638ed0b266741eaa4 -------------e- /var/tmp/mm.sem.sNdxjf -------------e- /var/tmp/sess_006d45dbd807291f7bffbd1db3707ed6 -------------e- /var/tmp/cache_2d0162aac9f87c1978ac644923a5e2fe -------------e- /var/tmp/sess_22c534418c380b72d105935b59713dd1 -------------e- /var/tmp/sess_94f72ef408567a15f6287c518e93898e -------------e- /var/tmp/cache_6fe03c83bb87489f3921db1c974dfc0e -------------e- /var/tmp/sess_48bbfa2a2a8793a62c7fd6a389a2763e -------------e- /var/tmp/mm.sem.ERERMV -------------e- /var/tmp/sess_20aba82c03a69b2dc6af66c499c38ee67e27368f -------------e- /var/tmp/sess_f94fe0589a79c934815ef359bcb0a16c7080d937 -------------e- /var/tmp/sess_460390801eb004593b4dee83779f414e -------------e- /var/tmp/spamd-52811-init -------------e- /var/tmp/cache_6427fdb235d59b0b2fbd105bf23d2e87 -------------e- /var/tmp/cache_4ce12d8350d7c0361dc1bf15d552a2d8 -------------e- /var/tmp/sess_039fec2a643340f118b6355e4c836ae8 -------------e- /var/tmp/sess_fa46fa80b26e6cf3d9c7de942d5dbcff -------------e- /var/tmp/cache_664858e614367812148716536e22d030 -------------e- /var/tmp/sess_4c8d4c44fbd828dc17415ce6aa213115 -------------e- /var/tmp/sess_d231a6c0e5dd4d7bacbf9de3d8bb298f -------------e- /var/tmp/sess_a82f8a088a8e37d375f6a9fede4a54d2 -------------e- /var/tmp/sess_604697227ae5359e5783dc9407845338 -------------e- /var/tmp/sess_5b4e623536640abe671b40563d03817d -------------e- /var/tmp/sess_2aba0aff64f3c18f22e0b79d591259e2 -------------e- /var/tmp/sess_bfd52a2d2d80880f8e26ad460739a0494f0d1e9e -------------e- /var/tmp/sess_ba9f3e3a7c7111930d6b801aaa833b46 -------------e- /var/tmp/sess_5cc8c5b620015a465359359a0805fbdd -------------e- /var/tmp/sess_84945c41d604b4653a1bf45d83a1917c -------------e- /var/tmp/sess_5f52569b27430780c07d25cfb8177e5c1ef647f0 -------------e- /var/tmp/sess_45896aef9e77f16be1b3e94b3edb2599 -------------e- /var/tmp/sess_5a67d0ef8f826a2f103b429c8464bdd5f75d6218 -------------e- /var/tmp/sess_1fce98bb32e5b34c79fd5a313de32980 -------------e- /var/tmp/sess_f7ea772ff3fbb1eb2ad8712dd2c49ed8 -------------e- /var/tmp/sess_a9dc16bc5c1eb2768bb2600f0d102fde -------------e- /var/tmp/mm.sem.3zwRTu -------------e- /var/tmp/sess_e2cad140703338a4b8c9254ec6b0a1a2 -------------e- /var/tmp/sess_e7c8e85daf9c5424aecb83e066decf31 -------------e- /var/tmp/sess_800f878fa944370f42e76057e7c033e19520bd41 -------------e- /var/tmp/sess_4fdae64eb18599521ace18679795568b -------------e- /var/tmp/sess_958fb886b97de2e767b059376c4724b5 -------------e- /var/tmp/sess_3c832a31f17744a8bb3c59dde02e561aefbc2e48 -------------e- /var/tmp/sess_6d9d7bf04f34e0d82b101f882196a905 -------------e- /var/tmp/sess_7231c75ae4fad2ca5fbcb6de430a7b13 -------------e- /var/tmp/sess_2eadffa2285def9673ce784395d272d8 -------------e- /var/tmp/cache_2ff353b664d8028df967f807ac18593a -------------e- /var/tmp/sess_4138a267f1f5e3ad93c1d64547c63134ae7c0db3 -------------e- /var/tmp/sess_64cd9fa0d6af8e8041aafffbe3db986a -------------e- /var/tmp/tmpg3ycIG -------------e- /var/tmp/cache_b633ac8283d6de8e39d81160d63fc8cd -------------e- /var/tmp/sess_2cee03cf5eafd3ef55d8efa1b0390436 -------------e- /var/tmp/sess_608066c609e28621f2a29ac04a3a6441 -------------e- /var/tmp/sess_46dfb35cf8266699ba9304e5d8c6869d -------------e- /var/tmp/sess_fb202a0ed54cee8832c5f6e0ca7fc1b3 -------------e- /var/tmp/sess_8fe3c5fd8cdda02855e5f9b5a1ea85a4 -------------e- /var/tmp/sess_941376d5cb51e0ba73f9a27ee259c159 -------------e- /var/tmp/sess_4fa17b1eac1d18341d20d0d8d4991ceb -------------e- /var/tmp/cache_de647c956ca6a1b75744ad194aceaa82 -------------e- /var/tmp/mm.sem.Ugu7Be -------------e- /var/tmp/sess_656e8a50759d5b36b963e7eb85e0bb0d -------------e- /var/tmp/sess_983f77b607bbffa1748d6c49557381e9 -------------e- /var/tmp/sess_632860d092e5e374da522ed2f88e83ce -------------e- /var/tmp/sess_030f900b81cc2a4ad095d53ef3ee0791 -------------e- /var/tmp/yum.log -------------e- /var/tmp/cache_810174993c6a2c0efe2edbe4c39a4a81 -------------e- /var/tmp/sess_29e2c781643434e81d189fc41f47fd34 -------------e- /var/tmp/tmpE12ahd -------------e- /var/tmp/sess_935da512fb077e04610266748b3b77f3 - cat /etc/fstab /tmp as: loop,rw,noexec,nosuid,nodev

    Read the article

  • Weird networking problem ( Linksys, Windows 7 )

    - by Rohit Nair
    Okay it's a bit tough to figure out where to start from, but here is the basic summary of the issue: During general internet usage, there are times when any attempt to visit a website stalls at "Waiting for somedomain.com". This problem occurs in Firefox, IE and Chrome. No website will load, INCLUDING the router configuration page at 192.168.1.1. Curiously, ping works fine, and other network apps such as MSN Messenger continue to work and I can send and receive messages. Disconnecting and reconnecting to the wireless network seems to fix the problem for a bit, but there are times when it relapses into not loading after every 2-3 http requests. Restarting the router seems to fix the issue, but it can crop up hours or days later. I have a CCNA cert and I know my way around the Windows family of operating systems, so I'm going to list all the things I've tried here. Other computers on the network seem to suffer the same problem, which makes me think it might be a specific problem with something in Win7. The random nature of this issue makes it a bit difficult to confirm, but I can definitely say that I have experienced this on the following systems: Windows 7 64-bit on my desktop Windows Vista 32-bit on my desktop ( the desktop has 2 wireless NICs and the problem existed on both ) Windows Vista 32-bit on my laptop ( both with wireless and wired ) Windows XP SP3 on another laptop ( both wireless and wired ) Using Wireshark to sniff packets seemed to indicate that although HTTP requests were being SENT out, no packets were coming in to respond to the HTTP request. However, other network apps continued to work i.e I would still receive IMs on Windows Live Messenger. Disabling IPV6 had no effect. Updating router firmware to the latest stock firmware by Linksys had no effect. Switching to dd-wrt firmware had no effect. By "no effect" I mean that although the restart required by firmware updates fixed the problem at the time, it still came back. A couple of weeks back, after a LOT of googling and flipping of various options, I figured it might be a case of router slowdown ( http://www.dd-wrt.com/wiki/index.php/Router%5FSlowdown ) caused by the fact that I occasionally run a torrent client. I tried changing the configuration as suggested in that router slowdown link, and restarted the router. However I have not run the torrent client for 12 days now, and yet I still randomly experience this problem. Currently the computer I am using is running Windows 7 64-bit. I would just like to reiterate some of the reasons that I was confused by the issue. Even the router config page at 192.168.1.1 would not load, indicating that it's not a problem with the WAN link, but probably a router issue or a local computer issue. For some reason, disconnecting and reconnecting to the wireless network immediately seems to fix the problem. Updating the router firmware, even switching to open source firmware did nothing. So it seemed to be a computer issue. On the other hand, I have not seen any mass outrage of people having networking problems with Windows 7 and Linksys routers, especially a problem of this sort, and I have tweaked every network setting I could think of. Although HTTP seems to have trouble, ping works fine, DNS lookups work fine, other networking apps work fine. However if I disconnect from Windows Live Messenger and try to reconnect, it fails to reconnect. So although it could receive data over the existing TCP/IP connection, trying to start a new one failed? Does anyone have any further ideas on debugging or fixing this issue? I am reasonably certain there are no viruses or other malicious apps on my network, and I am also reasonably certain that nobody is accessing my router without my consent. Router: Linksys WRT54G2 1.0 running dd-wrt firmware Wireless Card: Alfa AWUS036H OS: Windows 7 64-bit EDIT: I tried switching to a clean wireless channel free from interference, but the problem still persisted. I tried connecting directly with a cable, but the problem still persisted. Signed A very confused and bewildered geek whose knowledge seems to be useless in the face of this frustrating network issue.

    Read the article

  • Can't Remove Logical Drive/Array from HP P400

    - by Myles
    This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

    Read the article

  • Linksys router cannot change default password

    - by Jessica M.
    My wireless internet suddenly stopped working today. I have Windows 7 and Lindsys WRT54G router. I tried to log into the Linksys setup router page by typing in www.192.168.1.1 into firefox and it prompted me for a username and password as usual. The problem is when i tried to enter my regular username and password it did not work. I finally solved my problem when I came across this post here and the very last post solved my problem. It suggested I try username: root / password: admin. For some reason the username and password has been changed. When i tried username: root / password: admin , it worked and allowed me to get into the Linksys setup page. The problem is I can't change the username or password anymore. Every time I want to log into my Linksys setup page I have to enter username: root / password: admin. I can't change the "WPA shared key" (password). For the security settings I selected WPA2Personal + AES. Also the post said "If the firmware was upgraded to non-linksys firmware - the default will be different" . The problem is I didn't update anything and I'm worried that someone installed a virus or something or somehow changed the firmware on my router. How did I get non-Linksys firmware on my router? EDIT: I figured out how to change the password when I log into the Lynksys setup page. Administration -- Management -- password. I still don't understand if my router firmware was changed or who changed it or if it happened by mistake.

    Read the article

  • Gnome-Network-Manager Config File Migration

    - by Jorge
    I think I have an issue with gnome-network-manager, I used to have a lot of connections configured, Wireless, Wired and VPN. After upgrading to 12.04 (from 11.10) I lost every configuration. I realized that the configs that used to be saved in $HOME/.gconf/system/networking/connections now are being saved in /etc/NetworkManager/system-connections/. I don't know how to migrate my settings to the new config file format Can anybody help me? jorge@thinky:~$ sudo lshw -C network *-network description: Ethernet interface product: 82566MM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:1f:e2:14:5a:9b capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:fe000000-fe01ffff memory:fe025000-fe025fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 61 serial: 00:21:5c:32:c2:e5 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl4965 driverversion=3.2.0-23-generic-pae firmware=228.61.2.24 ip=192.168.2.103 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:df3fe000-df3fffff jorge@thinky:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise jorge@thinky:~$ uname -a Linux thinky 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 i686 i386 GNU/Linux jorge@thinky:~$ dpkg -l | grep -i firm ii linux-firmware 1.79 Firmware for Linux kernel drivers

    Read the article

  • Yoga Pro 2 Wi-Fi not working

    - by user293004
    I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

    Read the article

  • Watch a Tesla Coil Zap in “Bullet Time” [Video]

    - by Jason Fitzpatrick
    What happens when you take 10 cameras, hack their firmware, and rig them up in a Matrix-style “Bullet Time” array to capture a Tesla Coil blasting energy bolts? Pure video magic. Over at Hacker Friendly they took ten Canon A470s, hacked the firmware with the Canon CHDK firmware, and wired them all together into an arc to capture a Tesla coil in action. Watch the video below to see the results: Impressed? You can hit up the link below to see more photos and check out their code and schematics. Bullet Time Lightning [Hacker Friendly via Laughing Squid] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

    Read the article

  • How do I get an HP 1018 laser printer to work on 12.04?

    - by MInner
    edit : already printed on windows-machine Ubuntu 12.04, LJ 1018. I've tried making foo2zjs from sourse. I've downloaded firmware and placed it where necessarily manually from here I've also tried this - same as manual dowload but with some patches like stoping cups, etc.. I've fixed usbfs: process 11200 (usb) did not claim interface 0 before use problems using sudo rmmod usblp as described here. And now I have Aug 10 11:51:59 pav /usr/sbin/hplj1018: foo2zjs: usb://HP/LaserJet%201018?serial=KP07RLV... download failed. Aug 10 11:51:59 pav /usr/sbin/hplj1018: foo2zjs: loading HP LaserJet 1018 firmware /lib/firmware/hp/sihp1018.dl to CUPS USB device ... error. Before that prinet was stucking on "Sending data to printer". Now it's code is "Not connected". Unless ben@pav:~$ lsusb ... Bus 001 Device 015: ID 03f0:4117 Hewlett-Packard LaserJet 1018 Thank you.

    Read the article

  • Connection manager detects network but won't connect

    - by Carson Chittom
    I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

    Read the article

  • Boot log from remotely managed/hacked iPhone for analysis

    - by user1319903
    in reference to my other post. syslog captured immediately after a hard reset for analysis of foul play. Apr 8, 2012 10:08:36 PM - dataaccessd [53] (Notice): 137860|CoreDAV|Warn |Account "iCloud" couldn't reach the server at p03-contacts.icloud.com: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0xde63920 {NSErrorFailingURLStringKey=https://%[email protected]/159665024/principal/, NSErrorFailingURLKey=https://%[email protected]/ /principal/, NSLocalizedDescription=The Internet connection appears to be offline., NSUnderlyingError=0xde7dc00 "The Internet connection appears to be offline."} Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection interrupted Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): DEBUG: disconnected Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: Canceling Apr 8, 2012 10:08:36 PM - UserEventAgent [12] (Warning): TRACE: connection invalid Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Builtin profile: container (sandbox) Apr 8, 2012 10:08:35 PM - kernel [0] (Debug): launchd[82] Container: /private/var/mobile/Applications/048D35CA-6427-4EC8-8B76-A194697A7CE9 [69] (sandbox) Apr 8, 2012 10:08:35 PM - wifid [29] (Error): WiFi:[355640915.904103]: Client dataaccessd set type to background application Apr 8, 2012 10:08:35 PM - dataaccessd [53] (Notice): 137860|DA|Warn |Delegate 5ADDBE3B-D5FD-43E1-87D4-C1153733EFAB finished a refresh but it is not registered with the refresh manager Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting system time to 04/09/2012 05:08:34 from GPS because time is unchanged Apr 8, 2012 10:08:34 PM - timed [31] (Notice): (Note ) CoreTime: Not setting time zone to America/Los_Angeles from NITZ Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(1) Apr 8, 2012 10:08:33 PM - kernel [0] (Debug): AppleKeyStore:Sending lock change Apr 8, 2012 10:08:32 PM - profiled [20] (Notice): (Note ) profiled: Device unlock notification received Apr 8, 2012 10:08:31 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Warning): PSDLog: Can't return photoStreamsPublishStreamID because no Apple Account has Photo Streams enabled Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Not listening to push notifications. Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Retrieved push tokens. Dev: 0, Prod: 0 Apr 8, 2012 10:08:27 PM - mstreamd [43] (Notice): (Note ) mstreamd: Media stream daemon starting... Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Notice): SMSCTServer is available and ready to rock. Apr 8, 2012 10:08:26 PM - SpringBoard [15] (Error): mms: * isMmsConfigured = 1 Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:26 PM - MobilePhone [79] (Warning): Connection lost, retrying with key exchange. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): BT: failed to get connectable state with error 111 Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SMS Plugin initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): Telephony plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): SIMToolkit plugin for SpringBoard initialized. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): WiFi picker plugin initialized Apr 8, 2012 10:08:25 PM - SpringBoard [15] (Warning): EKAlarmEngine: Region monitoring not available or enabled. Trigger ignored! Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 0 Apr 8, 2012 10:08:24 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability  Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Leaving state unplugged_screen_off even though we are not in it, doing nothing Apr 8, 2012 10:08:24 PM - aggregated [61] (Warning): PLAggregateState Error: Entering state unplugged_screen_on even though we are already in it, doing nothing Apr 8, 2012 10:08:24 PM - wifid [29] (Error): WiFi:[355640904.616440]: Disable WoW requested by "spd" Apr 8, 2012 10:08:24 PM - SpringBoard [15] (Warning): Application windows are expected to have a root view controller at the end of application launch Apr 8, 2012 10:08:23 PM - SpringBoard [15] (Warning): BTM: attaching to BTServer Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated: fw len=1232920 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadFirmware_gated - firmware checksum: 0x05935019 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 0 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_Init - No set-file loaded for camera channel 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 0: 0x0145 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_InitialSensorDetection - found sensor on chan 1: 0x7736 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_off_hardware Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=0) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::ISP_LoadSetfile_gated (camChan=1) Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::setPowerStateGated: 1 Apr 8, 2012 10:08:23 PM - kernel [0] (Debug): AppleH4CamIn::power_on_hardware Apr 8, 2012 10:08:23 PM - profiled [20] (Notice): (Note ) profiled: Locking device Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'cdma', '    '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function PTP Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction all functions registered- we are ready to start usb stack Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::handleUSBCableDisconnect Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'nb  '} added to resources Apr 8, 2012 10:08:22 PM - kernel [0] (Debug): HighlandParkResourceMgr::AddFirmware() {'gsm ', 'wb  '} added to resources Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): MobileDelete: LowDisk Plugin: start Apr 8, 2012 10:08:22 PM - MRMLowDiskUEA [12] (Notice): kqueue registration successful Apr 8, 2012 10:08:22 PM - mediaserverd [44] (Error): 22:08:22.522867 com.apple.AVConference: /SourceCache/GameKitServices/GameKitServices-344.21/AVConference.subproj/Sources/AVConferenceServer.m:1867: AVConferenceServerStart Apr 8, 2012 10:08:22 PM - CommCenter [18] (Notice): Carrier bundle value for recipient address: 28818773 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: iPod USB Interface Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: PTP Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice          Interface: AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): IOAccessoryPortUSB::start Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): virtual bool AppleUSBDeviceMux::start(IOService*) build: Feb  1 2012 23:16:46 Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): init_waste Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice::start: Host MAC address = 02:(this Mac address does not physically exist) -edit Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): AppleUSBEthernetDevice: Ethernet address  Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'cdma' '    ' } Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.282776]: Could not read APPLE80211_IOC_SUPPORTED_CHANNELS err=82 Apr 8, 2012 10:08:21 PM - wifid [29] (Error): WiFi:[355640901.312786]: Client itunesstored is background application Apr 8, 2012 10:08:21 PM - timed [31] (Notice): (Note ) CoreTime: Want active time in 38.24hrs. Need active time in 121.57hrs. Apr 8, 2012 10:08:21 PM - SpringBoard [15] (Notice): MultitouchHID: detection mode: 255-0 (deferring until bootloaded) Apr 8, 2012 10:08:21 PM - CLTM [12] (Error): CLTM: resetting temps: now = 1333948101, last update = -2147483648 Apr 8, 2012 10:08:21 PM - locationd [28] (Error): WiFi:[355640901.852993]: WiFiManager now available Apr 8, 2012 10:08:21 PM - OTACrashCopier [62] (Notice): (Warn ) Failed to read attributes from '/var/mobile/Library/OTALogging/.last_successful_submission_marker' Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'nb  ' } Apr 8, 2012 10:08:21 PM - hpfd [50] (Notice): firmware resource loaded { 'gsm ' 'wb  ' } Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): successful initialization Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore:initFirmware(): 2496 PropTxStatus feature is not enabled for this platform  Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle():: creating virtual interface with prefix = ap Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): AppleBCMWLANCore::initDongle(): Core Driver Initialization Time 19.38798583 Apr 8, 2012 10:08:20 PM - kernel [0] (Debug): 000019.281423 hsic-baseband::safetyNet: port is not connected Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: try to create blob Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 _create_cesm_vault: blob written Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 ping_configd: Not setting host name, it already has one: Pete's iPod  Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 lookup_baseband_info_new: radio not ready: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: Consulting "no-sdio-devices" property. Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Error): WiFi: "no-sdio-devices" property not found. Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says the device is: [Activated], state is 3 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Warning): lockdown says we've previously registered: [1], state is 1 Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: now listening for CT notifications Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 notification_worker: we've registered for notifications, now make sure we didn't miss one... Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 load_activation_records: This is the default record Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Original act. state: Activated Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: radio not ready, don't change activation status, wait for notification, status: kCTPostponementStatusNotReady Apr 8, 2012 10:08:20 PM - lockdownd [23] (Notice): 3e828d98 determine_activation_state_new: Activation state now is Activated Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): Posting 'com.apple.iokit.hid.displayStatus' notifyState=1 Apr 8, 2012 10:08:20 PM - SpringBoard [15] (Notice): __IOHIDLoadBundles: Loaded 1 HID plugin Apr 8, 2012 10:08:19 PM - wifiFirmwareLoader [30] (Warning): [    18.778 sec] Downloaded firmware, 192512 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleKeyStore:cp_key_store_action(0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 128 bytes of prox calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 1024 bytes of calibration data ("built-in") Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::attachBusGated(): Bus Driver Initialization Time 18.266927958 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore:attachBusGated(): Starting with MAC Address: 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANFirmwareManager::setNVRAMData(): received 778 bytes Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore: Ethernet address 00:f4:b9:2f:d9:8d Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): Loading syscfg. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleMultitouchN1SPI: downloaded 56264 bytes of firmware data ("0x0084.bin") in 152ms. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AirPort: Enabled AppleBCMWLANCore (link 0, sys 0, user 0) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::apple80211_ioctl() Driver not yet initialized, cannot process ioctl Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANBusInterfaceHSIC::loadFirmware(): DL Ver: chip 0x4330, chiprev 0x4 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BTServer[66] Builtin profile: BlueTool (sandbox) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): BCMWLAN Firmware Version: wl0: Dec 22 2011 19:03:58 version 5.95.45 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Firmware supports ap mode; enabling apsta feature (currently enabled) Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): country code set to XX Apr 8, 2012 10:08:19 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCmdManager::processResponse(): Firmware Error "BCOM Unsupported" on command "WLC_SET_VAR: bus:txglom" (263). Transaction ID 3, length 0 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware(): Glomming not supported on this device: BCOM Unsupported Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::initFirmware: apsta set to 1 Apr 8, 2012 10:08:19 PM - kernel [0] (Debug): AppleBCMWLANCore::handleEventPacket(): WLC_E_FIFO_CREDIT_MAP,length 6 [9 2 5 3 2] Apr 8, 2012 10:08:19 PM - iapd [49] (Error): Timed out trying to acquire capabilities data. Apr 8, 2012 10:08:19 PM - softwareupdated [37] (Notice): 3e828d98 : Cleaning up unused prepared updates Apr 8, 2012 10:08:19 PM - com.apple.misd [63] (Notice): allowing special port forwarding for test fixtures Apr 8, 2012 10:08:19 PM - hpfd [50] (Notice): resource request { 'N94 ', '    ' } Apr 8, 2012 10:08:19 PM - mstreamd [43] (Notice): (Note ) mstreamd: mstreamd starting up. Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[44] Builtin profile: mediaserverd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[49] Builtin profile: iapd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[53] Builtin profile: dataaccessd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[60] Builtin profile: apsd (sandbox) Apr 8, 2012 10:08:18 PM - kernel [0] (Debug): launchd[66] Builtin profile: BTServer (sandbox) Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): mDNSResponder mDNSResponder-329.10 (Jan 15 2012 19:07:41) starting iOSVers 9 Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: SetDomainSecrets: no keychain support Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): Note: Compiled without SnowLeopard Fine-Grained Power Management support Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): event logs in /private/var/.fseventsd out of sync with volume.  destroying old logs. (10083 7 10090) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /private/var/.fseventsd getting new uuid: 8778E61A-0283-4067-B7DF-F75D109983D1 Apr 8, 2012 10:08:18 PM - fseventsd [51] (Error): failed to make the directory /.fseventsd (30/Read-only file system) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): could not open < (No such file or directory) Apr 8, 2012 10:08:18 PM - fseventsd [51] (Critical): log dir: /tmp getting new uuid: 3919EB54-A54F-4289-864A-5158A25EF9DA Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.328610]: WiFi Preferences is up to date Apr 8, 2012 10:08:18 PM - mDNSResponder [46] (Error): D2DInitialize succeeded Apr 8, 2012 10:08:18 PM - fairplayd.N94 [52] (Notice): Vroum Apr 8, 2012 10:08:18 PM - wifid [29] (Error): WiFi:[355640898.537219]: WiFiManager starting, version: WiFiManager-260.9 Feb  4 2012 13:25:16 Apr 8, 2012 10:08:18 PM - configd [14] (Error): WiFi:[355640898.539342]: WiFiManager now available Apr 8, 2012 10:08:18 PM - keybagd [39] (Error): 3e828d98 main: System Keybag loaded Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.268 sec] Found AppleBCMWLANBusInterface; downloading FW.. Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/bcm94330OlympicUNO3.txt", file size = 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.276 sec] Sending NVRAM, 778 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): Loading "/usr/share/firmware/wifi/4330b2/n94.trx", file size = 192512 bytes Apr 8, 2012 10:08:18 PM - wifiFirmwareLoader [30] (Warning): [    18.300 sec] Sending firmware, 192512 bytes Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyEthernetMacAddress: got 00:f4:b9:2f:d9:8f from syscfg Apr 8, 2012 10:08:18 PM - mediaserverd [44] (Notice): 2012-04-08 10:08:18.817015 PM [AirTunes] HAL plugin started Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyBasebandBoardSnum: Could not convert baseband board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt createCFStringWithCFData: Cannot convert NULL data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Error): libMobileGestalt copyWirelessBoardSnum: Could not convert wireless board snum data to string Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 lockstart_local: Build= 9B179 Apr 8, 2012 10:08:18 PM - lockdownd [23] (Notice): 3e828d98 _load_product_type: using Raptor Certs Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.590 sec] wlan AppleUSBHSICDevice found Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.590 sec] WLAN Enumeration attempt 0 / 6: Apr 8, 2012 10:08:17 PM - wifiFirmwareLoader [30] (Warning): [    17.591 sec] Waiting for AppleBCMWLANBusInterface to enumerate... Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): MMS thread running Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): Communications Center Started. Apr 8, 2012 10:08:16 PM - CommCenter [18] (Notice): STOP LOCATION UPDATE Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.704327]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.705542]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.706648]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:16 PM - locationd [28] (Error): WiFi:[355640896.707418]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:15 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), RGB_CTRL (0x00000000) clk_down_ready is not set after 60 msecs Apr 8, 2012 10:08:14 PM - lockdownd [23] (Notice): 3e828d98 main: Starting Up Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn AppleRGBOUT::set_display_device_gated(uint32_t), 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 1 fHard: 1 swapBusy: 1  fController: 0 - 1 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_up_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): set_crc_notification_state 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): virtual void AppleRGBOUT::do_power_state_change(): fSoft: 0 fHard: 1 swapBusy: 0  fController: 1 - 0 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware() Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): IOReturn IOMobileFramebufferUserClient::set_hotplug_notify(void *, void *) 0x849d5000 0x876e8828 0x314b3f0d 0xe215600 Apr 8, 2012 10:08:14 PM - kernel [0] (Debug): bool AppleRGBOUT::power_down_hardware(), clock down RGBOUT Apr 8, 2012 10:08:14 PM - SpringBoard [15] (Notice): IOMobileFrameBufferGetMirroringCapability returning -536870201 via kIOMFBConnectMethod_GetMirroringCapability  Apr 8, 2012 10:08:14 PM - backupd [21] (Warning): INFO: Account changed (enabled=0, accountID=159665024) Apr 8, 2012 10:08:13 PM - kernel [0] (Debug): launchd[17] Builtin profile: ptpd (sandbox) Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): Factory called Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.157493]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158197]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - configd [14] (Error): WiFi:[355640893.158878]: bootstrap_look_up of WiFiManager server failed Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Notice): (Note ) PIH: MCUEAPlugin initialized. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Error): Querying interface Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Error): ioctl(SIOCGIFCAP) failed: Device not configured Apr 8, 2012 10:08:13 PM - configd [14] (Notice): setting hostname to "Petes-iPod" Apr 8, 2012 10:08:13 PM - configd [14] (Notice): network configuration changed. Apr 8, 2012 10:08:13 PM - UserEventAgent [12] (Warning): TRACE: sending {    command = kMBMessageAccountChanged; } Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Service starting... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Performing boot time checks. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: Checking for MDM installation... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) MC: ...finished checking for MDM installation. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Checking for new carrier profile... Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Installing new carrier profile. Apr 8, 2012 10:08:13 PM - profiled [20] (Notice): (Note ) profiled: Carrier profile has already been installed. Apr 8, 2012 10:08:12 PM - com.apple.launchd [1] (Warning): (com.apple.ptpd) The exception server is already claimed! Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: mitigation behavior enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: camera equations enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermal monitoring enabled Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: registered for wake notification Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 0 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 1 to 546 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 2 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 3 to 6553 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 4 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 5 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 6 to 16384 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 9 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set decay on sensor 10 to 5461 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor1 dithering level to 101% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set AppleARMPerformanceControllerDVDFactor0 dithering level to 100% Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: Set charge rate index to 0 Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: HID not ready cannot set BL Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: setting thermal status level to 0 (0) [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: set allowable transmit power limit to 24.000 dBm [-32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768, -32768] Apr 8, 2012 10:08:12 PM - CLTM [12] (Error): CLTM: Could not close relay file Apr 8, 2012 10:08:12 PM - CLTM [12] (Notice): CLTM: thermtgraphrelay is not present

    Read the article

  • BCM 4306 not recognized after upgrade on a Dell Latitude D600

    - by Brian Eisemann
    This is extremely frustrating to me. I had the wireless card working before I upgraded to 11.10. At first the wireless device was recognized but it told me there was no firmware, so I went ahead and went through the process I did before of installing the b43/b43legacy firmware, and now my wireless device is not even recognized, or showing up anywhere! 02:03.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11a/b/g [14e4:4324] (rev 03)

    Read the article

  • Software design for non object oriented paradigm

    - by Dean
    I'm currently working on a project where I'm writing the firmware for an electronic system in C, and have been asked to produce documentation on the development/evolution of the software for the embedded devices. Having developed software in the object oriented paradigm I know to use UML to document the software such as class diagrams with objects, however this does not work for documenting the development of my embedded system. So what should I produce to document the development of my firmware?

    Read the article

  • Secure Your Wireless Router: 8 Things You Can Do Right Now

    - by Chris Hoffman
    A security researcher recently discovered a backdoor in many D-Link routers, allowing anyone to access the router without knowing the username or password. This isn’t the first router security issue and won’t be the last. To protect yourself, you should ensure that your router is configured securely. This is about more than just enabling Wi-Fi encryption and not hosting an open Wi-Fi network. Disable Remote Access Routers offer a web interface, allowing you to configure them through a browser. The router runs a web server and makes this web page available when you’re on the router’s local network. However, most routers offer a “remote access” feature that allows you to access this web interface from anywhere in the world. Even if you set a username and password, if you have a D-Link router affected by this vulnerability, anyone would be able to log in without any credentials. If you have remote access disabled, you’d be safe from people remotely accessing your router and tampering with it. To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled — it should be disabled by default on most routers, but it’s good to check. Update the Firmware Like our operating systems, web browsers, and every other piece of software we use, router software isn’t perfect. The router’s firmware — essentially the software running on the router — may have security flaws. Router manufacturers may release firmware updates that fix such security holes, although they quickly discontinue support for most routers and move on to the next models. Unfortunately, most routers don’t have an auto-update feature like Windows and our web browsers do — you have to check your router manufacturer’s website for a firmware update and install it manually via the router’s web interface. Check to be sure your router has the latest available firmware installed. Change Default Login Credentials Many routers have default login credentials that are fairly obvious, such as the password “admin”. If someone gained access to your router’s web interface through some sort of vulnerability or just by logging onto your Wi-Fi network, it would be easy to log in and tamper with the router’s settings. To avoid this, change the router’s password to a non-default password that an attacker couldn’t easily guess. Some routers even allow you to change the username you use to log into your router. Lock Down Wi-Fi Access If someone gains access to your Wi-Fi network, they could attempt to tamper with your router — or just do other bad things like snoop on your local file shares or use your connection to downloaded copyrighted content and get you in trouble. Running an open Wi-Fi network can be dangerous. To prevent this, ensure your router’s Wi-Fi is secure. This is pretty simple: Set it to use WPA2 encryption and use a reasonably secure passphrase. Don’t use the weaker WEP encryption or set an obvious passphrase like “password”. Disable UPnP A variety of UPnP flaws have been found in consumer routers. Tens of millions of consumer routers respond to UPnP requests from the Internet, allowing attackers on the Internet to remotely configure your router. Flash applets in your browser could use UPnP to open ports, making your computer more vulnerable. UPnP is fairly insecure for a variety of reasons. To avoid UPnP-based problems, disable UPnP on your router via its web interface. If you use software that needs ports forwarded — such as a BitTorrent client, game server, or communications program — you’ll have to forward ports on your router without relying on UPnP. Log Out of the Router’s Web Interface When You’re Done Configuring It Cross site scripting (XSS) flaws have been found in some routers. A router with such an XSS flaw could be controlled by a malicious web page, allowing the web page to configure settings while you’re logged in. If your router is using its default username and password, it would be easy for the malicious web page to gain access. Even if you changed your router’s password, it would be theoretically possible for a website to use your logged-in session to access your router and modify its settings. To prevent this, just log out of your router when you’re done configuring it — if you can’t do that, you may want to clear your browser cookies. This isn’t something to be too paranoid about, but logging out of your router when you’re done using it is a quick and easy thing to do. Change the Router’s Local IP Address If you’re really paranoid, you may be able to change your router’s local IP address. For example, if its default address is 192.168.0.1, you could change it to 192.168.0.150. If the router itself were vulnerable and some sort of malicious script in your web browser attempted to exploit a cross site scripting vulnerability, accessing known-vulnerable routers at their local IP address and tampering with them, the attack would fail. This step isn’t completely necessary, especially since it wouldn’t protect against local attackers — if someone were on your network or software was running on your PC, they’d be able to determine your router’s IP address and connect to it. Install Third-Party Firmwares If you’re really worried about security, you could also install a third-party firmware such as DD-WRT or OpenWRT. You won’t find obscure back doors added by the router’s manufacturer in these alternative firmwares. Consumer routers are shaping up to be a perfect storm of security problems — they’re not automatically updated with new security patches, they’re connected directly to the Internet, manufacturers quickly stop supporting them, and many consumer routers seem to be full of bad code that leads to UPnP exploits and easy-to-exploit backdoors. It’s smart to take some basic precautions. Image Credit: Nuscreen on Flickr     

    Read the article

  • sony vaio WLAN problem using 12.04

    - by Fredrik
    I'm unable to get my WLAN to work for my Sony Vaio model VPCF23C5E No problem connecting from windows, smartphones etc. $ sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep -i firm *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 64:27:37:92:99:0f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-29-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:f7000000-f707ffff memory:f7080000-f708ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: f0:bf:97:dd:b2:bd size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-1.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:50 ioport:9000(size=256) memory:e2104000-e2104fff memory:e2100000-e2103fff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise Linux siriedit 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no [ 1.287449] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 18.273582] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS Seen some proposed solution e.g. Wireless network cannot be enabled for Sony VAIO E series but answers there don't solve my problem... I'm out of ideas :-( What else can I check? update $ ifconfig -a eth0 Link encap:Ethernet HWaddr f0:bf:97:dd:b2:bd inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f2bf:97ff:fedd:b2bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 TX packets:4444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4568435 (4.5 MB) TX bytes:610624 (610.6 KB) Interrupt:50 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1498 errors:0 dropped:0 overruns:0 frame:0 TX packets:1498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:114156 (114.1 KB) TX bytes:114156 (114.1 KB) wlan0 Link encap:Ethernet HWaddr 64:27:37:92:99:0f inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6627:37ff:fe92:990f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1277 errors:0 dropped:0 overruns:0 frame:0 TX packets:472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:483155 (483.1 KB) TX bytes:61031 (61.0 KB)

    Read the article

  • wrt54gl reboots; troubleshooting steps?

    - by Bill
    I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

    Read the article

  • Installing 64-bit Ubuntu Server 12.04 LTS, on a VM with VMWare Player, on a 64-bit Windows 7 PC

    - by WannaBeAGeek
    I'm trying to create a VM, using VMWare Player, with an ISO image of Ubuntu Server 12.04 (LTS). The machine I'm doing the installation on has an Intel(R) Core(TM) i5 CPU, and runs 64-bit Windows 7 I managed to create the VM (gave username, password, configured network etc), but I can't install Ubuntu Server. First I get this alert : Binary translation is incompatible with long mode on this platform. Disabling long mode. Without long mode support, the virtual machine will not be able to run 64-bit code. For more details see http://vmware.com/info?id=152. When I click OK, I get another alert : This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host supports Intel VT-x, but Intel VT-x is disabled. Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. (1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.' (2) Power-cycle the host if either of these BIOS/firmware settings have been changed. (3) Power-cycle the host if you have not done so since installing VMware Player. (4) Update the host's BIOS/firmware to the latest version. For more detailed information, see http://vmware.com/info?id=152. Then, when I click OK, my VM exists, and I get back to the VMWare Player home screen. I don't know much about hardware and virtualisation, so there might be some necessary info I'm not giving. Please don't hesitate to let me know what is missing in my post, for finding solutions. Thanks :)

    Read the article

  • When modern computers boot, what initial setup of RAM do they execute, and how does it exactly work?

    - by user272840
    I know the title reeks of confusion, and some of you might assume I am just wondering about how the computer boots in general, but I'm not. But I'll sort this out for you people now: 1.Onboard firmware is how mostly all modern computer devices work, whether or not with EFI/UEFI(even without "onboard firmware", older computers still employed bank switching, or similar methods with snap-in firmware, cartridges, etc.) 2.On startup there is no "programs" running in the traditional sense yet, i.e. no kernel, OS, user-applications; all of the instructions, especially the very first instruction, is specified by the Instruction Pointer, I am guessing. How is the IP/PC/etc. set to first point to an address for a BIOS/firmware/etc. instruction, and how do the BIOS instructions map themself out in memory prior to startup? 3.Aside from MMIO, BIOS uses certain RAM addresses to have instructions. The big ? comes in when I ask this ... how does BIOS do this? Conclusion: I am assuming that with the very first instruction there is an initial hardware setup for BIOS prior to complete OS bootup. What I want to know is if it's hardware engineered to always work this way, if there's another step in this bootup method I am missing, a gap of information I am unaware of, or how this all works from the very first instruction, and the RAM data itself.

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >