Search Results

Search found 298 results on 12 pages for 'psu'.

Page 7/12 | < Previous Page | 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • hp XW8000 work station power supply

    - by user281745
    My power supply went up in the XW8000 and I bought a new corsair cx500. I installed it but when I hook it up and I turn the computer on I get a beeping noise from the computer. I looked at the old power supply and the new power supply. The only difference is that the new power supply has 500 watts and the old one is 450 watts and the old PSU has a brown wire and the new power supply has 2 orange wires at the end. I found out that it is a sense wire that is in a different location so I was wondering how do I fix this problem.

    Read the article

  • Clock drift even though NTPD running

    - by droffo
    I'm having a problem with the clock drifting on my PC. I'M running Ubuntu 10.10 on an somewhat crusty IBM e-server (1.5GB RAM, 2.4GHz CPU) ntpd is running (started at run level 2) servers are defined: server 1.us.pool.ntp.org server 2.us.pool.ntp.org server 3.us.pool.ntp.org server time.nrc.ca server ntp1.cmc.ec.gc.ca server ntp2.cmc.ec.gc.ca server wuarchive.wustl.edu server clock.psu.edu Looking at the log file, it would seem that the ntp daemon is running, but the system clock never seems to be set, however. If I manually set the time from a Casio "atomic" watch, the date/time displayed by the Clock applet drifts out of sync over time. Looking at the log file (below) it would seem the ntp daemon started ok and is running. So I am totally flummoxed right now :-( Here's a copy of my ntp.log file.

    Read the article

  • Computer Freezes After GRUB

    - by paulmcg421
    Ok so I've just built my first computer and have got it running, here are the specs: Asus P8Z68-V PCI-E LX Motherboard, Intel Core i5-2500K, Patriot Memory 8GB (2 x 4GB), Viper Xtreme Series PC3-15000 1866MHz CL9 Division 2 Edition Memory (PXD38G1866ELK), Gigabyte ATI Radeon 6850 820MHz 1GB PCI-E HDMI OC Windforce 2x 500w Ezcool 24pin psu as standard. The only thing I haven't bought new is the hard drive, it's a 250gb that I removed from an Acer Aspire M5100 that I was using till now with no OS Problems. On start up it runs fine but is unresponsive after the GRUB menu disappears to load Ubuntu (Oneric Ocelot). The keyboard lights then turn off and the screen eventually returns that there is no signal. Is there anything that I could be missing from building? (This is my first attempt at building my own PC) Any input would be appreciated, thanks !

    Read the article

  • CPU spikes cause audio stuttering in Audacious when browsing? (Lubuntu)

    - by Alucai Vivorvel
    My default audio player is Audacious, browser Google Chrome. I tried Firefox, and while I love it, the CPU load spikes when doing something as simple and small and switching a tab, which causes the audio playing to stutter (as sound is onboard and handled thru the CPU). Chrome doesn't do this as much, but there is the occasional stuttering when browsing, which is ridiculous, as not even Windows Vista does this. So I thought maybe it's something to do with how Lubuntu handles sound, I checked and only ALSA was installed. I tried installing PulseAudio, but, while the music "plays", nothing comes through the speakers. Immediately after switching back to ALSA the music pours out of them. So I was wondering if you had any idea what was going on here. I asked on Ubuntu Forums but apparently my problem is too complex, as it's been over a week since the last reply. Specs are: AMD Athlon 64 3200+ @ 2GHz 2GB Corsair 667MHz DDR2 RAM ATi HD Radeon 3650 (AGP) 512MB 500W Cooler Master PSU 80GB SATA II HDD (Vista is installed on 500GB drive) Biostar K8M800 Motherboard

    Read the article

  • Why are USB 2.0 devices crashing my system?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic baby-ATX motherboard with no identifying markings. CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. There's one stamp on the motherboard that says "Rev.B". On board it has 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. It has an 80Gb Western Digital hard drive freshly formatted and built with Windows XP Professional with Service Pack 3 and all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 crashes the machine as soon as it starts up). It's got a Daytek MV150 15" touch screen running through the VGA and COM1 with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem If I hook any USB 2.0 devices to this machine, it hangs the whole machine and I have to hard boot it to get it back up. Workarounds found I can plug the same devices into the on board USB 1.0 connectors and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions I've tried disabling all the on board devices that I'm not using - such as the on board LAN, the second COM port, the AGP connector etc. through the BIOS in an (perhaps misguided or futile) attempt to reduce the power consumption... I don't think it had any effect but it didn't do any harm. I was wondering if the PSU wattage just isn't enough to drive the USB 2.0 devices; I've seen this suggested but haven't found any confirmation that this could really be an issue - nor have I found a way to work around this issue - if indeed it is one. Any ideas? The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference. I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself. Other thoughts Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • How to diagnose computer lockups and freezes?

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

    Read the article

  • xfx 680i motherboard failure?

    - by Ian
    At some point last night we must have had a blip in our power, as the stove clock was blinking like it would had their been... a blip in the power. When I came into my office this morning, my desktop computer was powered down and would not turn on. Cracking the case, I can see a small blue blinking light on the front right corner of the motherboard. Unplugging the power from the PSU causes the blinking to stop. Plugging in the power causes the blinking to resume. Pressing the power button does nothing. Does anyone know what this blinking blue light means? I'm mostly curious now if it's the motherboard that has gone bad, or the power supply. I don't have any other desktop parts to use to troubleshoot these components. Any ideas? My motherboard is an XFX NFORCE 680I SLI INTEL SOCKET 775 DDR2 ( Model #: MB-N680-ISH9 )

    Read the article

  • Computer starts, POSTs normal, no video

    - by Annath
    So, I recently tried to start up an old computer of mine. It would not power on, so I replaced the PSU. When I powered it on, all the fans spun up and the POST beeps indicated a normal startup. The problem was there was no video output. Every couple of minutes, I hear the post code again. I think it is restarting after POST, but without video I have no idea why. Does anyone have an idea as to why this is happening, and how to fix it? EDIT: The video card is a PCI-e card. There is no integrated graphics on the motherboard. If I remove the video card, the POST indicates a missing card. When I put it back, it goes back to normal, so I know that it recognizes that the card exists.

    Read the article

  • Keyboard automatically disconnects and reconnects

    - by Algorithms
    The problem i am facing is the keyboard (USB) automatically disconnects when there is a fluctuation in the power supply to the speaker. The speaker and the pc both draw power from a apc ups. The fluctuation occurs because the speaker plug is not tightly connected to the ups power outlet. It is okay for normal work, but a accidental jerk causes the fluctuation. However after some amount of time (usually within 5 seconds) the keyboard automatically reconnects and windows plays the sound of hardware connected. This problem will also occur if I manually take out the speaker power cable from the ups power outlet. My question is whether the problem I am facing is due to electrical issues, or due to software problems. PC config: OS : Windows 7 Ultimate UPS : APC 600 VA PSU : Corsair TX 650 Speaker : Realtek

    Read the article

  • Lack of Virtual Memory - confusion

    - by Wesley
    Specs ahead of time: AMD Athlon XP 2400+ @ 2.00 GHz / 1 GB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / 350W PSU / Windows XP Pro SP3 So, XP has pop-ups saying that I am low on virtual memory. However, I have a program called SmartRAM (part of Advanced SystemCare by IObit) and it displays CPU & Page File Usage and Free Physical and Virtual Memory. That program shows that I have at least 2000 MB free virtual memory on my machine when the XP pop-ups say that I'm low on virtual memory. First off, would a complete lack of virtual memory cause my computer to freeze? Secondly, how can I solve this lack of virtual memory? (A complete reformat is possible but can't be done immediately...) Thanks in advance.

    Read the article

  • Small web server hardware advice

    - by Dmitri
    We need to build a new web server for our organization. We have around 100 hundred small traffic web sites, so our hardware requirements are not too tough. We run CentOS 6, Varnish+Apache, PHP, MySQL, Typo3 CMS for most of websites. Here's a hardware we want to buy: SuperMicro X9SCA-F-O (we need to have a remote management capability) (or better X9SCM-F?) Intel Xeon E3-1220 v2 2*4Gb DDR-III 1600MHz Kingston ECC (KVR16E11/4) (currently we have 4gb, and it feels like enough, so no reason for 16gb yet). Procase EB140-B-0 (1 unit) PSU 350W Procase MG1350, Active PFC We already have: Intel 335 120GB SSD (for OS, databases and important websites). 2*2tb WD Green RAID1 (for other data and backups). Does it look like a reasonable choice for our needs? Any issues with hardware compatibility? Any other notes?

    Read the article

  • would unexpected power cuts harm the Linux OS?

    - by Johan Elmander
    I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

    Read the article

  • Disk boot failure, insert system disk and press Enter.

    - by torbengb
    Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

    Read the article

  • Firefox 3.5.6 Uninstaller not working

    - by Wesley
    Hi all, I want to uninstall Firefox 3.5.6 in favor of Opera 10.10. However, I've went into Control Panel Add or Remove Programs and tried clicking Remove from there, but nothing happens. I go into the Program Files for FIrefox and find the Uninstaller folder and click the helper.exe found in there. Still, nothing happens. Is there some possible way to uninstall Firefox without screwing up the rest of my computer? Computer is a EMACHINES T2482: http://emachines.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T2482 RAM has been upgraded to 1 GB PC3200 DDR, GPU has been upgraded to 128MB GeForce 6200, HDD has been upgraded to 160 GB, PSU has been upgraded to 350W and Floppy and DVD Reader have been disconnected from mobo and power. OS is XP Pro SP3

    Read the article

  • Is the motherboard the cause of these errors?

    - by ianfuture
    Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

    Read the article

  • How low-power can a home server get?

    - by Halik
    I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

    Read the article

  • Can unexpected power loss harm a Linux install?

    - by Johan Elmander
    I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

    Read the article

  • Building a new PC, Installing XP, blue screen of death

    - by Tim
    I got a gigabyte barebones kit and am installing windows-XP(SP1) and the initial setup works, then it restarts and goes into the second phase of the setup. Then when installing components (I think that's what it says) it gets half way done and comes up with a blue screen saying IRQL_NOT_LESS_OR_EQUAL. BUT! I had gotten past that by installing windows-XP media center addition Now I am trying to install the drivers for my Asus ATI Radeon 5770 graphics card and I get another blue screen of death that doesnt give much info something about address x0000005. Would you think there is something wrong with something in my system or do you think if I got windows 7 that would take care of things? Sorry for probably not giving enough info. Here is what I have MotherBoard - Gigabyte S-series GA-H55M-S2(v) PSU - Ultra 500 watt atx HDD - Sata serial ATA Seagate Baracudda 7200 CPU - Intel i3 Memory - 4gig crucial Graphics Card - Asus ATI Radeon 5770 1Gig DDR5

    Read the article

  • Are these components compatible and are there any significant bottlenecks?

    - by Tom Gullen
    I'm trying to buy a new pc, for software dev and a bit of gaming. I already have a 500gb HDD , and a PCI sound card I want to use as well. Is all this stuff compatible, and will it all work together and are there any significant bottlenecks? Case, Mobo and PSU "Primo Motion" AMD 880G DDR3 Ready Barebones (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=FS-268-OK&groupid=43&catid=1817&subcat= SSD 64GB Crucial RealSSD C300 64GB 2.5" SATA 6Gb/s Solid State Hard Drive http://www.overclockers.co.uk/showproduct.php?prodid=HD-007-CR&groupid=1657&catid=1660&subcat=1668 CPU AMD Phenom II X6 Six Core 1090T Black Edition 3.20GHz (Socket AM3) http://www.overclockers.co.uk/showproduct.php?prodid=CP-266-AM&groupid=701&catid=6&subcat=1944 RAM 8GB Corsair Vengeance 8GB (2x4GB) DDR3 PC3-15000C9 1866MHz Dual Channel Kit http://www.overclockers.co.uk/showproduct.php?prodid=MY-292-CS&groupid=701&catid=8&subcat=1387 Graphics XFX ATI Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card http://www.overclockers.co.uk/showproduct.php?prodid=GX-149-XF

    Read the article

  • SLI Artifact issues

    - by sloughk
    When I enable SLI I keep getting artifacts in random games and in Windows Aero sometimes . It doesn't seem to be about over-heating as it happens randomly, and sometimes whole computers just crashes (not blue-screen, just black gone...) My setup: Geforce 8800 GTS 320MB ( http://www.bfgtech.com/bfgr88512gtoce.aspx ) x 2 GIGABYTE EX58-UD4 Windows 7 RC PSU 800W I've got the latest NVIDIA drivers and F5 BIOS update (*SLI update*). When I disable SLI and use the cards separately they are working just fine even in games. Any idea why this might happen?

    Read the article

  • Building a new cluster for mathematical calculations (Win/Lin)

    - by Muhammad Farhan
    I would like to build a new cluster to perform heavy mathematical calculations in Matlab and Abaqus. One of my friend told me that distributed computing is way faster than parallel computing, which is very true after reading a bit on the internet. However, I have never clustered before. Current workstation I own: Dell Precision T5400 2 x Intel Xeon 2.5 GHz 16 GB RAM (2GB x 8) 1 x Western Digital 1TB HDD 7200 rpm 1 x nVidia Quadro FX4600 768MB GPU 1 x 870W PSU OS: Windows 7 Ultimate 64-bit 2nd WS: I can buy another WS similar configuration to the one I own I am not bothered about OS, I am willing to cluster with either Windows or Linux. However, my software are compatible with windows 64-bit only. Please help me setup a cluster. Thank you.

    Read the article

  • Windows XP Disc: corrupt or not corrupt?

    - by Wesley
    Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

    Read the article

  • Will this increase my VPS failing rate ?

    - by Spencer Lim
    Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange install Team foundation server on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler for this about one VPS can only install what what what service ? Thx for reply

    Read the article

  • Sudden restart when Ubuntu almost loaded from disc.

    - by Wesley
    Hi all, Here are the specs beforehand: ECS K7SEM motherboard AMD Duron 900MHz 2x 256MB PC133 SDRAM The Best Power MT-500P 500W PSU Integrated graphics No hard drive DVD-ROM - will update with brand & model Now, I was starting up this machine after it was left outside for 3 months in winter weather. (I got this from a friend.) I was able to get it started and tried to load Ubuntu from the DVD-ROM. It was fairly successful and got up to the point when the Ubuntu logo is glowing. However, when Ubuntu was about to go to the main screen, the computer crashed and automatically rebooted. Is there any reason why this is happening? Also, I should mention that when I try to hit Delete on the BIOS screen to go to Setup, it only shows a screen with four lines saying something Novell something... I will edit with exact lines. Should I be resetting the BIOS or something? Thanks in advance.

    Read the article

  • How can I be sure that the motherboard is dead and it's not another issue?

    - by Peter
    So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12  | Next Page >