Search Results

Search found 20264 results on 811 pages for 'home networking'.

Page 70/811 | < Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >

• How to change Port 27000 from filtered to open status

  - by Nadarajah Ranjan

  In my ubuntu box I am running flexlm licensing software on port 27000 and I am able to pull the license from the this port to run the simulation software locally. I am also trying to run the same software in another Linux machine (opensuse) by using the flexlm license from the Ubuntu box. However, my opensuse box is unable to communicate with port 27000 in my Ubuntu box. I have turned off the firewall on the Ubuntu box, played around with iptables and when I do a nmap from my opensuse box to Ubuntu box the message I get is that port 27000 is on filtered status. My understanding is that filtered status does not allow the opensuse box to communicate with Ubuntu. My question is how to change port 27000 from filtered status to open status? Hope someone can help me out. Thank you.

  Read the article

• Ubuntu ver 14.04 Network discovery not showing up on windows 8 but on windows 7

  - by Schwabber

  I have an old PC that is now my new Ubuntu machine. Currently I was working on sharing a drive so that backups and streaming could take place. I have it set up perfectly on my windows 7 laptop (able to read and write to it). For some reason however my wife's windows 8 laptop is not showing up on the Ubuntu and vice versa. I turned on network discovery on the win8 machine, but that didn't help. Thanks in advance edit- I have my win7 and win8 in the same homegroup and both can see each other in the network. Also the workgroup is the same.

  Read the article

• Duplicate ping response when running Ubuntu as virtual machine (VMWare)

  - by Stonerain

  I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

  Read the article

• Cannot connect to windows share

  - by BCqrstoO

  I've been going through and pouring over resource for the past few hours and I cannot get my box to connect to my friends network drive. My friend doesn't use linux, but he's setup the network share like this: DPR:\\name\images and he's given me the username and password which I've verified is correct. It is located on 192.168.0.2 sudo mount -t cifs -o username=***,password=*** //name/images /media/name/ sudo mount.cifs //192.168.0.2/name/images /media/name/ -o credentials=~/name.credentials (I've confirmed that ~/name.credentials does have the correct credentials as well) Regardless of what I attempt I get mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I'm not sure what I'm doing wrong, but it's probably really simple and stupid. Thanks to any/all in advance. EDIT: I don't know if this helps, but I'm running Ubuntu 14.04.

  Read the article

• 12.04 - why does the network icon dissapear every time my machine is turned off

  - by Howard Walker

  After spending an hour or two working out how to find the network Icon, I find that when I reboot the machine, I have to go through the whole procedure again. 1. The network menu is not there - so first I have to find the terminal. This has no particular location that I can find but usually I have to type terminal in the dash. 2. Then I have to type nm-applet in terminal 3. The network manager icon then appears, but only works if the terminal window remains open. Shut down the terminal window and the network disappears. This is a pain - plus I have to type my password in every time, which is another waste of time, thought this has always been a problem. So can anyone tell me how to make the web automatically connect at startup without any intervention from me.

  Read the article

• How do i Setup Different Users to Folders

  - by Erin

  I am trying to setup a Ubuntu Server for an office. Its going to be a file share server that 4-5 desktops connect to and access the files. Im planning on having different access for certain computers so computer 1 has full access but say computer 2 can only see a certain folder. My question is, is this possible and how would i go about setting it up? All workstations are using Windows XP - Vista.

  Read the article

• Ubuntu 12.04 lts cannot build a wireless connection

  - by Jupiterr

  Hi i just got a new notebook and it came with ubuntu 12.04 lts operation system. But it can't make a wireless connection. I plugged in my Ethernet cable and i can reach the Internet with it but I need wireless connection so much. This is the first time I'm using ubuntu so i'm really confused. I can see wireless networks (including mine) but i cannot use them. It seems like it's establishing a connection but soon it gives up. Please help, I don't have much time for this and I do not have any idea about operation systems.

  Read the article

• Procedural object generation and unique identification

  - by 2080

  My question relates to procedural content generation and data management of the emerging objects in a database. I assume a networked game, with a server-client model. Unspecified objects in the game world are generated while the game is running with procedural algorithms (for example perlin noise). The players (/clients) can modify the properties of these objects, but have to notify the server of these changes. How could this communication address unique objects, so that both the server and the client know of which object they are speaking? Not only the inner properties of the objects can differ, but also visible, such as the position. When the player wants to select one of these objects the game has to find out the id - does anyone know which methods or algorithms can accomplish that?

  Read the article

• Wireless not connecting on Ubuntu 13.10, Toshiba Satellite pro L 650

  - by user204842

  I have just installed Ubuntu 13.10 on my Toshiba Satellite Pro L650. After several reboots, installing/ uninstalling the broadcom driver I still can't connect. It detects the wi fi signals and the icon flashes as if it's trying to connect but never actually does. I'm really quite rubbish with code and stuff, but I really like Ubuntu as an OS and would really appreciate any suggestions anyone can offer! 02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

  Read the article

• Wireless Disabled (Network Manager)

  - by Peter Kihara

  Am Having issues with My Wireless 1 My laptop had dual boot windows 7 and Ubuntu 13.04 I upgraded to windows 8 and after the first 2-3 reboots all was working well in windows and ubuntu then my wireless in ubuntu stoped working saying "wifi is disabled by hardware switch" the hardware switch has no effect I removed network manager installed new firmwares and still nothing the wifi was not working in a moment of testing I installed wifi radar and this can detect the wireless signals and at one point it connected but still Network manger still says disabled. My Laptop is a HP Pavilion dm4 2070us with Wireless Centrino N 1000 I have updated to 13.10 thinking it would fix it but still nothing

  Read the article

• Network print to brother MFC-7420

  - by trampster

  I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine. The brother is attached to a windows XP machine and is shared. This is what I have tried: System-Administration-Printing, Add, Expand Network Printer, Windows Printer via SAMBA, Browse (I can find the printer no problems here), Foward, Choose Driver Dialog, Brother, My printer is not in this list So the next thing I tried was to download the printer driver from here http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html The driver installed fine but my printer still does not appear in the list. I also tried installing the cups wrapper but that gave the following error. Restarting Common Unix Printing System: cupsd [ OK ] cp: cannot stat `/usr/share/cups/model/MFC7420.ppd': No such file or directory dpkg: error processing cupswrappermfc7420 (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: cupswrappermfc7420 I tried connecting the printer directly but even though I have installed the driver, when I go to printers and click on the printer (it shows up fine as a USB printer) then it say searching for drivers and then gives me a list, this is the same list as before which doesn't have my printer. It really shouldn't be this hard. on window you don't have to installing anything it just works and the same is true for my brothers Mac. How do I print to my printer?

  Read the article

• How to connect MTS MBlaze on ubuntu 11.04

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• How can I work out how many IP addresses there are in a given range?

  - by Jarede

  I'm wondering if there is a formula to work out the amount of IP addresses in a given range. I have a system that takes either a single IP address or a start and and end IP address: A single one might be: 145.16.23.241 A range might be: 145.16.23.122 - 145.16.23.144 The people inputting these aren't technical, nor are they receiving these details from technical people, so suggesting using CIDR notation isn't an answer for me. I want to be able to highlight that when entering a range such as: 122.100.10.12 - 128.10.200.140 it might not actually be a range and rather 2 singular IP addresses since such a range would comprise of x (large number of) IP addresses. Is there a basic formula to help me highlight this?

  Read the article

• Client side prediction/simulation Question

  - by Legendre

  I found a related question but it doesn't have what I needed. Client A sends input to move at T0. Server receives input at T1. All clients receive the change at T2. Question: With client-side prediction, client A would start moving at T0, client-side. All other clients receive the change at T2, so to them, client A only started moving at T2. If I understand correctly, client B will always see client A's past position and not his current position? How do I sync both client B and client A?

  Read the article

• Application to organize / manage installed networks

  - by vicmp3

  I was wondering if there is a Application where you can organize networks. I mean if you have installed some networks you have to note every pc's name, his ip-address and so on. Is there a Application where you can manage it? I saw the monitoring tools but that is not exactly what I'm looking for. Maybe I didnt explain me well, after all my englis his not so good :) For example if I install many different networks I write in a book how I configured them. I write pc-name ip-address ip-gateway ip-broadcast and so on for each network. It will be great if I can do it in a program to organize it well, and for example it gives me a node view of the network.

  Read the article

• suggestions for lonewolf dev setup

  - by d33j

  I'm looking for some suggestions for a better development setup. Background: I'm a crusty old software engineer (mostly java of late) and I have around 50 - 100 incomplete java projects scattered everywhere, usb keys, HDDs, and spanning across 5 or 6 computers etc, which have been put on hold for a few years (ie: family). I have no version control at home. I've been using IntelliJ for around 10 years, so that's the only constant. I'm thinking of nominating one machine as a headless server to put all my projects on, maybe a ubuntu box, that way It won't matter which device I'm on, all my projects can be accessed (and I don't have to waste time actually looking for them). I don't need to access code over the net. These are my own 'happy place' projects so I only work on them when I'm at home, however I can see the benefit of the tasking app being online, that way if I think of something while on public transport lets say, I can add it then & there, but it's not a requirement. I can wait until I get home to create tasks. Summary: So I need some sort of version control so I can rollback mistakes, and some sort of simple tasking software where I can assign tasks for myself later on when I get time. I use Subversion, Sonar, Jira and Crucible at work but I think it's a little bit of an overkill for me though. What do you suggest?

  Read the article

• Advice on how to understand in general and in practice IT Infrastructure

  - by Luca

  My IT knowledge resides mainly in SW development. I have just some basic know how about networks. On the net I tried to get information and read books in order to better understand the overall IT infrastrcuture, but all the sources I found are too generic or, mainly, too detailed in just one aspect, making me lost. Could anyone suggest some books or web resources as good compromise in details? My goal would be able to understand the network issues and security threats when, for example, two remote system have to be setup and put in connection each other. Considering this scenario there are several aspects to consider: firewalls, intranet/internet interconnections, certificates for httpS, etc. The argument is quite wide, therefore I was looking for something that might help to start to understand this subject without going too deep in details (Computer Networks from A.Tanenbaum is a wonderful milestone, but way too specific for my scope). Thanks

  Read the article

• The Home Stretch: NetBeans IDE 7.1 Release Candidate

  - by TinuA

  The first release candidate build of NetBeans IDE 7.1 is live and available for download, which means the big release (GA) is expected any day soon.NetBeans IDE 7.1 delivers support for JavaFX 2.0, enabling the full compile, debug and profile development cycle for JavaFX 2.0 applications and keeping developers in sync with the latest from the Java platform. Beyond JavaFX support, 7.1 also provides significant Swing GUI Builder enhancements, CSS3 support, and visual debugging tools for JavaFX and Swing user interfaces. And Git--a much anticipated featured--has been integrated into the IDE."The entire NetBeans team is tremendously excited about this release, which provides developers with more state-of-the-art tools for building front-end clients," says NetBeans Engineering Director John Jullion-Ceccarelli. "Whether you are doing JavaFX, HTML5, Swing, or JSF, NetBeans 7.1 will let you quickly and easily develop great-looking and full-featured clients for your Java or PHP-based applications."But there's one more task to check off before the general availability: The NetBeans team has launched a Community Acceptance Survey to get user feedback about the release candidate. Download the RC build, test it and take the survey to let the team know if NetBeans IDE 7.1 is ready for its debut!

  Read the article

• wired connection not being recognised in ubuntu 10.04 lts

  - by arun

  I have windows7 installed on my C drive and ubuntu 10.04 lts on my D drive. When I plud the lan cable (ethernet cable) onto the ethernet card of my laptop, windows7 identifies the network correctly without the need for any manual settings and connects me to the network correctly. Unfortunately, in ubuntu, even after plugging in the cable, nothing happens (on the network side). It is only scanning for wireless networks it seems, and doesnt bother about the wired networks. I tried adding a new wired connection and manually entered the physical address which was displayed when i connected to the network using windows. i entered the phy address, and told it to use auto dhcp and saved the dialog bog in ubuntu network connection. Still there is no change, and ubuntu doesnt seem to recognise anything. please let me know how to work with wired connections using ubuntu, and why my wired cable is not being recognized in ubuntu. thanks. PS: I am pretty new to ubuntu/ linux :)

  Read the article

• After update UBUNTU 12.04 changes wired interface from eth0 to eth1, network configuration fails

  - by Don McLaren

  I have been running UBUNTU 12.04 for a couple of months on this system with no problems. After a recent update, the bootup fails to define the wired network interface as eth0, so the default network configuration fails. ifconfig -a shows eth1 instead, as unconfigured. Booting from CD works OK, configures eth0 as normal. Solution: sudo NetworkManager The network manager figures out the situation, and configures eth1 Question: Where did this problem come from all of a sudden?

  Read the article

• How to restart WiFi interface without rebooting (it drops connection)?

  - by Dima

  I boot into ubuntu and it connects to the Wifi network fine. After about 10-15min the DNS stop resolving any website and a couple of minutes later network-managers tells me that I'm disconnected and tries to reconnect constantly to my router and fails to do it. Upon Ubuntu restart everything works fine for the first 10-15min again. When I boot into Mac OS X everything is fine with the same connection! How do I restart wifi interface? sudo ifdow wlan0 just tells me that wlan0 is not configured and wlan0 doesn't appear in /etc/network/interfaces either, which I find strange.... (unless network-manager is doing it behind my back).

  Read the article

• trouble detecing huawei EC156 in ubuntu 12.04

  - by naina

  the data card is never detected automatically...its detected only when i fire a lsusb. Later i give modeswitch commands etc etc...then the device works fine..i can easily use internet...but once i disconnect from the net, its impossible to reestablish the connection...to reconnect i have to type all the commands, starting with lsusb, in the terminal again..ie every time i want a connection i have to sit and type 5-6 commands in the terminal before i can get through. what can be done to get automatic net connection as soon as i plug in the data card...please help...

  Read the article

• No Sound from Shared Media

  - by Travis

  I have a shared media folder that I have all of my mp3's in. When I try to play them using Ubuntu, I get no sound, but the media player (Rhythmbox, Exaile, etc) display that they are playing the file, it looks like everything is playing but no sound. I have checked and rechecked the volume levels of the system and each application and I see no issues. If I move a file to the local drive, it plays just fine. I do sound checks while the file is playing and I get audio (front left, front right) from the test but not from the media file that I am playing. Any help would be greatly appreciated.

  Read the article

• Wireless connected but internet not working, modem is fine because I'm typing over wifi on my android

  - by Sandro Livaja

  I can't connect to the Internet in 11.10. I tried switching my wifi card to another USB slot but nothing changed. Is it possible that the card is able to connect while not being able to receive packages? $ ifconfig eth0 Link encap:Ethernet HWaddr 40:61:86:35:11:b0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 74:ea:3a:8c:d5:5c inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::76ea:3aff:fe8c:d55c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1209 (1.2 KB) TX bytes:15329 (15.3 KB)

  Read the article

• How do I get my RTL8192ce based wireless device working properly?

  - by JonnyTruelove

  I am using the rtl8192cu chipset (on a Belkin wireless USB adapter N300) combined with 64 bit architecture and the 3.8 kernel. Some of you may know that this doesn't work. I tried this fix - RTL8188CU USB Network Adaptor on ubuntu 13.04 and now my internet is super slow. I am totally new to Ubuntu and I am concerned I do not have the right driver. The "stock" driver was the RTL8192cu, but it didn't connect 99% of the time and if it did the upload speed was higher than the download. Right now I am connecting through my laptop with a crossover cable, so my internet connection is just fine in my apartment. Relevant output from lsusb is here: Bus 002 Device 002: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU] (bonus question: is that [050d:2103] the actual physical address straight from the hardware? Or does it change when I put different drivers on it? I am concerned I do not have the right driver)

  Read the article

< Previous Page | 66 67 68 69 70 71 72 73 74 75 76 77  | Next Page >