Search Results

Search found 4186 results on 168 pages for 'ember router'.

Page 72/168 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Can't connect printer wirelessly to linksys wrt54g using WPS

  - by Mark J Seger

  I've already blown over 1/2 day on this. I keep checking and rechecking my router settings and they agree with what the documentation says for my brand new HP4620 printer. Supposedly I just tell the router to listen for connections and tell the printer to connect. It fails every time! Further, I have also read some opinions that when things are not configured correctly the linksys will disable WPS and it looks like that's happening as well. Further, it's causing other wireless devices in my house to lose there connectivity until I re-enable WPA networking on the router. Has anyone been here before? This is driving me crazy... -mark

  Read the article

• Ubuntu 12.04 Transparent proxy gateway

  - by user146536

  i have a ubuntu server which i want to use as a transparent proxy, (i have no issue setting up squid, just the iptables. The server only has one network interface. The server sits on the same subnet as the router which is the current gateway to the internet for clients, i want to simply set the gateway on the clients pointing at the transparent proxy which in turn forwards the requests to the router and off to the internet. See me diagram, can anybody offer to help with the iptables configuration to achieve this scenario? subnet mask /22 Router(10.4.12.1) Transparent Proxy (eth0, 10.4.12.2) | | +----+----+---------+----+----+ | | | | Comp1(10.4.12.6) Comp2(10.4.12.5) Comp3(10.4.12.4) Comp4(10.4.12.3) Thanks

  Read the article

• Iptables: masquarading and routing

  - by nixnotwin

  I have a WAN router which is linked to isp over a /30 WAN subnet. But it also servers as a router to a /29 local public WAN subnet which is connected to few of my servers. The traffic from /29 gets routed to ISP via /30 subnet. For a wired reason I want to masqarade (NAT) the interface which has /30 ip. So the interface with /30 ip should appear as masquaraded for my 192.168.1.0/24 network and it also should act as a normal non-NAT router for my WAN public subnet /29. Can this be done with iptables on a Linux machine?

  Read the article

• Unable to ping between subnets and out to internet

  - by battlemidget

  My setup is Modem - Linksys router - Laptop with 2 devices (wlan0/eth0) - desktop machine Router is 192.168.1.1 gateway to the internet Laptop wlan0 is 192.168.1.4 with a gw of 192.168.1.1 Laptop eth0 is 192.168.2.254 which acts as a second gateway desktop is 192.168.2.100 On laptop i've setup ip_forward to 1, and have inserted 2 iptables rules -A FORWARD -i eth0 -o wlan0 -j ACCEPT -A FORWARD -i wlan0 -o eth0 -j ACCEPT The laptop can ping outside the network (i,e, yahoo.com) it can not ping 192.168.2.100. The desktop can ping 192.168.2.254 but nothing outside the network or 192.168.1.0 subnet. On laptop ip route show lists: 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.4 127.0.0.0/8 dev lo scope link default via 192.168.1.1 dev wlan0 What am I missing to make my desktop go through the laptop in order to access the router which provides access to the internet? Thanks

  Read the article

• Uploading to YouTube makes all browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• Combine VPN bandwith over two or more WAN connections? Load balancing?

  - by mistrfu

  Imagine you only have DSL with 5mbps Down and 2mbps Up. Is it possible to have 10 of these for example and combine them in a way that would increase the upstrean bandwidth to one server? In my head it works like this: intranet with one gateway/router router connected to multi wan load ballancer on each ballancer wan port router with vpn clinet set up, tunneling to a server ?some? software on the server in cloud joining all these connection into one interface again I would need this mostly for big uploads to a server, downlink to the office is not that important at all. Does it even make sense? I drew an image to clarify.

  Read the article

• How do I set up my home server to go directly to a port other than 80

  - by Kevin

  I'm using dyndns, a lynksis wt54g router, and tomcat 7 with spring to set up a web server. This is my first time to attempt this. I'm sure this is a very common question, but I don't know enough to find the answer after quite a bit searching. Dyndns is successfully forwarding to my ip. The main problem is, the router admin login is coming up when my url is used. I'm hosting my site on port 8080. I have port forwarding set up for port 8080 but my request times out when I attempt to use my url like this www.myurl1234.com:8080. I don't want users to have to type the port anyway. I also tried changing the management port to 82 and hosting on port 80, but I still get the router admin login when I use my url. Where am I going wrong? Can I set it up so that www.myurl1234.com goes straight to port 8080?

  Read the article

• RDC not working from outside

  - by Cotten

  I've set up Remote Connection according to : http://windows.microsoft.com/is-IS/windows7/allow-remote-desktop-connections-from-outside-your-home-network That is, Allow remote connections to the computer you want to access. Make sure Remote Desktop is able to communicate through your firewall. Find the IP address of the computer on your home network that you want to connect to. Open your router's configuration screen and forward TCP port 3389 to the destination computer's IP address. Find your router's public IP address so that Remote Desktop can find it on the Internet. When I'm inside the LAN, RDC works flawlessly. When I try to connect to the ip given by my ISP it cannot connect. I've setup port forwarding for 3389 on my netgear router. Thanks!

  Read the article

• Tool to allow Kerberos Authenticated users to modify Firewall settings

  - by Lars Hanke

  I run a firewall on a central router. Recently, several users want to use Skype. Since firewalling Skype virtually means to switch the firewall off, I consider to allow users to temporarily punch holes for their system. Since the users have no accounts on the router, I consider using Kerberos for authentication and authorization. The router is a Debian Squeeze box, with minimal configuration, i.e. no web-server, database or similar gimmicks. Does anyone know an existing solution, which could be used for that purpose? Or does anybody know easy to use and well documented frameworks in say Perl, Python, C, C++, ... making the set-up of a Kerberos authenticated Client and Server application really simple?

  Read the article

• Intercepting LAN network traffic via WiFi

  - by user1613655

  Let's get straight to the point. This is my fictive network architecture: My question is: Would it be possible for Laptop B to intercept traffic sent and received by Laptop A? Please note that B only has WiFi access and no physical control over Router B. Furthermore, Router A and B create different wireless networks with different encryption keys. If both shared the same wireless network or Laptop B had LAN-access to Router B, the answer would be trivial, but I'm not sure how the answer turns out in this scenario :-/ Thanks for your valuable help!

  Read the article

• Separate 2 networks with 1 Windows Server

  - by SamuGG

  The situation is: I have 1 router 192.168.1.1, 1 switch, 1 windows server and a basic LAN of devices accessing it. I need to split into 2 separate LANs with full Internet access each, but isolated from each other. Given that, the server is a Windows Server 2008 R2 with 2 NICs: NIC1: 192.168.1.2 NIC2: 192.168.2.2 The router has no dhcp configuration. Please, can anyone explain gracefully, step by step, what do I need to do? What would be the 2 NICs full configuration? What services do I need to install? I don't want devices on either network to see devices on the other network, they must be completely separate. I guess I'm missing the routing procedure step, but I have no idea how is that done. For example: tell the server that devices with gateway 192.168.2.2 must send traffic for internet to 192.168.1.1 router. Thanks in advance.

  Read the article

• hosting website on a private network

  - by razor

  i'm currently running a website off 3 linux servers. I'd like to setup a private network and only allow port 80 traffic to one of the servers. I'd also like to setup a vpn so only I can access the servers via ssh or any port for developing/debugging. How hard is this to setup and what do I need to get? Do enterprise/commercial routers have vpn functionality built in? how do I handle DNS? eg- www.mydomain.com would need to point to the router, which forwards traffic to the webserver. Do I set the A record to the router, and somehow tell the router which server to send the http request to? And how would I make server1.mydomain.com resolve to server1 within the private network (without editing host files)? Would I need to run my own DNS (eg- powerdns?) to do this?

  Read the article

• Can one use Airport (Time Capsule) with an external DHCP server?

  - by DNS

  I currently share my DSL connection using a wireless router with DHCP disabled, and dnsmasq running on a Mac Mini serving DHCP & DNS. This setup is important because I have clients doing PXE boot, and I need the control over DHCP that dnsmasq provides. There is also a Time Capsule on the network that's used purely as a backup device; its wireless functions are disabled. The wireless router is starting to get a little flaky, and since it doesn't support 802.11n I'd like to replace it. Rather than buying a new router, I'd like to just use the Time Capsule. But I see no way to disable its DHCP server; when I set the connection type to PPPoE, it insists on serving DHCP. Is there any way to use Airport PPPoE with a DHCP server elsewhere on the network?

  Read the article

• is it possible to set up a wireless bridge with dd-wrt?

  - by user398314

  I have a standard router (dlink) and a secondary linksys running wrt. Currently i have it set up according to this guide. (using the Instruction for dd-wrt v24 sp1 settings) It works great however it seems as though i can only connect via the actually ports in the router meaning it has to be hard wired. Is it possible to set it up so that I can connect to the secondary router and still use it as a bridge? Seems like it doesn't work as a wireless AP anymore when its running in bridged mode.

  Read the article

• I can't get an IP address from a VirtualBox VM on OSX from some routers (ie Internet cafes)

  - by ezrock

  On OSX 10.7.3, VirtualBox, using bridged adapter. Everything on the networking side works perfectly as expected in some networking environments, like my home router and some cafes. In others, I can't get an IP address over DHCP, and I don't know why. I suspect there is some setting on the router that is preventing me, or I have some issue with my MAC adress. When it's not working, in syslog, I'll see a few DHCPDISCOVER messages as my VM tries to find a DHCP server, and after a while, "No DHCPOFFERS received" And when I go to a "good" router, a simple "service network restart" is all I need to get an IP. Any ideas?

  Read the article

• Intel Corporation Ethernet Connection does not start properly

  - by Oscar Alejos

  I'm experiencing some problems when trying to connect my PC to the router through a switch. When the PC is directly connected to the router, everything works fine, Ubuntu (14.04) starts normally, and the Internet connection runs inmediately. The Ethernet controller is the Intel Corporation Ethernet Connection, as lspci returns: $ lspci | grep Eth 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) However, when I try to connect through the switch what I get is the following. dmesg returns: $ dmesg | grep eth [ 1.035585] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.035587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a7:be:5d [ 1.035589] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.035625] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.357838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.641287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.715086] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.715090] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.715117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready It looks like eth0 is properly working. Actually, nm-tool returns: $ nm-tool - Device: eth0 [Conexión cableada] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: 00:22:4D:A7:BE:5D Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.30 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 80.58.61.250 DNS: 80.58.61.254 DNS: 192.168.1.1 However, ping returns: $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.30 icmp_seq=1 Destination Host Unreachable From 192.168.1.30 icmp_seq=2 Destination Host Unreachable From 192.168.1.30 icmp_seq=3 Destination Host Unreachable The connection is restored by restarting it: # ifconfig eth0 down # ifconfig eth0 up From this point on, everything runs smoothly, as if the PC were directly connected to the router. It seems to be an issue related to the integrated LAN adaptor and the Ethernet controller, since my laptop connects without any problem. My desktop board is an Intel DB85FL. I'd be grateful if anyone could give some ideas on how to solve this issue. Thank you in advance.

  Read the article

• Trying to Host Server for External Access - Apache, VirtualBox & Portforwarding

  - by Tspoon

  Banging my head on the wall at this stage.... trying to host my Apache site on Ubuntu 12.10 with VirtualBox. Running Windows 8 host. Things I've done: Ensured Apache is listening on ports 80, 443 and 8080 (for thoroughness) tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 3355/httpd tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 3355/httpd tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 3355/httpd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 681/sshd VM is using bridged network connection Assigned a static IP to my Ubuntu VM, which can be accessed fine from within network. Forwarded TCP ports 80, 8080, 443 on the static IP of VM on my router Given my VM a static NAT Address Turned off Ubuntu firewall and router firewall Read on forums that my ISP (Eircom) allow port 80 to be used And I still can't access my site using the WAN/External IP (checked internally and using CanYouSeeMe.org). It says all the ports I mentioned are closed. I'm really at a loss of what to try next... Am I missing something silly here? Note: I haven't assigned a static IP address within the router, on within the VM. And DHCP server is enabled. Is that bad?

  Read the article

• Website hosted at home pingable from outside, but not browseable from outside

  - by Richard DesLonde

  I have a simple setup. Server at home has local I.P. 192.168.1.3 IIS is running on the server and the website is up. Windows firewall on the server has an exception rule for port 80 TCP Router has static I.P. XX.XXX.XX.XXX Router is forwarding TCP port 80 to 192.168.1.3 My domain registrar is my DNS host and is pointing to the static I.P. XX.XXX.XX.XXX of the router Here's what I can and can't do. I can browse the website from within my home network either by I.P. or domain name. I can ping the domain and the I.P. from outside the network (from a computer at work). I can't browse the website either by domain name or by I.P. Wierd. Why I can't browse my website? Incidentally, I wasn't sure this question was appropriate for SO, but after finding a few others similar to it on SO, and no comments on those questions saying anything about it being innapropriate, I decided I would post this question. Let me know if this is not appropriate for SO, or is more appropriate for another of the SE websites. Thanks!

  Read the article

• Mount Ubuntu shares remotely with Mac and Windows

  - by Donald

  First time on here so please be gentle! I have setup a small school network with a Ubuntu 12.04 Server for use as a fileserver mainly. I have managed to set the server up (all command line based - no GUI) and setup the Samba shares, which works really well internally. Internally, the school have a combination of Mac's and Windows machines and they can all access the shares happily. The school has a fixed IP ADSL connection and I have added a route in the router to allow me remote access to the server using SSH (port 22). That also works well. All good so far! What I now want to do is allow remote access to the shares. I have done a bit of reading and thought I had found the answer with SSHFS but I am still non-the-wiser. So, my basic questions is: In Windows, how can I map to the Ubuntu shares across the internet through the router? In Mac OS, how can I add the remote share across the internet? The school used to have a Windows server and the users were used to creating a VPN and then pulling up the share folders etc, but I'm unsure how to do this with the Ubuntu server. I assume I need to add another route through the router too allow for SSHFS or something similar? Thanks in advance... Donald

  Read the article

• What are my options for sharing music between Windows & Ubuntu on the same network?

  - by jgbelacqua

  We have a few Windows(XP & 7) and Ubuntu machines in the house sharing a wireless connection, and want to share music between them. If possible, I would like to be able to serve music from both Windows and Ubuntu (but it doesn't have to be the same time). I don't know much about sharing folders or streaming, but I'm guessing both would be options (that is, using a local client to access a shared song or a local client to access a shared stream). I want to be able to share the music between the systems as simply as possible. Bonus points (but not requirements) for cross-platform -- same application on both Windows and Ubuntu? available on startup (via daemon or autostart or whatnot) open source More info: All systems have dynamic addresses (DHCP) supplied from the ISP-supplied wireless router. There are several Gigabytes of music on one Windows XP box and one Ubuntu 10.10 The music is not well-sorted (I'm thinking this might have an impact on UI usability). Only has to be available internally (private address space behind the wireless router) bandwidth is not a problem We don't have (legitimate) admin access to the wireless router

  Read the article

• Dual LAN Printing

  - by Christopher

  I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight, Chris

  Read the article

• How do I get a rt2800usb wireless device working?

  - by Jii

  My brand new desktop running 13.04 has endless problems with wireless. Dozens of others are flooding forums with reports of the same problems. It worked fine for a few days, then there were a few days where it started having problems sometimes and working sometimes. Now it never works at all. I have 5+ devices all able to connect without any trouble at all, including iPhone, Android phone, 3DS, multiple game consoles, a laptop running windows 7, and even a second desktop machine running Ubuntu 12.04 sitting right behind the 13.04 machine. All other devices have full wireless bars displayed (strong signals). At any moment, one of the following is happening, and it changes randomly: Trying to connect forever, but never establishing a connection. Wireless icon constantly animating. Finds no wireless networks at all. (There are 12+ in range according to other devices.) Will not try to connect to the network. If I use the icon to connect, it will display "Disconnected" within a few seconds. Will continuously ask for the network password. Typing it in correctly does not help. Wireless is working fine. This happens sometimes. It can work for days at a time, or only 10 mins at a time. Various things that usually do nothing but sometimes fix the problem: Reboot. This has the best chance of helping, but it usually takes 5+ times. Disable/re-enable Wi-Fi using the wireless icon. Disable/re-enable Networking using the wireless icon. Use the icon to try and connect to a network (if found). Use the icon to open Edit Connections and delete my connection info, causing it to be recreated (once it's actually found again). Various things that seem to make no difference: Changing between using Linux headers in grub at bootup, between 3.10.0, 3.9.0, or 3.8.0. Move the wireless router very close to the desktop. Running sudo rfkill unblock all (I dunno what this is supposed to do.) I've used Ubuntu for 6 years and I've never had a problem with networking. Now I'm spending all my time reading through endless problem reports and trying all the answers. None of them have helped. I am doing this instead of getting work done, which is defeating the whole purpose of using Ubuntu. It's heartbreaking to be honest. In the current state of "no networks are showing up", here are outputs from the random things that other people are usually asked to run: lspic 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) lsmod Module Size Used by e100 41119 0 nls_iso8859_1 12713 1 parport_pc 28284 0 ppdev 17106 0 bnep 18258 2 rfcomm 47863 12 binfmt_misc 17540 1 arc4 12573 2 rt2800usb 27201 0 rt2x00usb 20857 1 rt2800usb rt2800lib 68029 1 rt2800usb rt2x00lib 55764 3 rt2x00usb,rt2800lib,rt2800usb coretemp 13596 0 mac80211 656164 3 rt2x00lib,rt2x00usb,rt2800lib kvm_intel 138733 0 kvm 452835 1 kvm_intel cfg80211 547224 2 mac80211,rt2x00lib crc_ccitt 12707 1 rt2800lib ghash_clmulni_intel 13259 0 aesni_intel 55449 0 usb_storage 61749 1 aes_x86_64 17131 1 aesni_intel joydev 17613 0 xts 12922 1 aesni_intel nouveau 1001310 3 snd_hda_codec_hdmi 37407 1 lrw 13294 1 aesni_intel gf128mul 14951 2 lrw,xts mxm_wmi 13021 1 nouveau snd_hda_codec_realtek 46511 1 ablk_helper 13597 1 aesni_intel wmi 19256 2 mxm_wmi,nouveau snd_hda_intel 44397 5 ttm 88251 1 nouveau drm_kms_helper 49082 1 nouveau drm 295908 5 ttm,drm_kms_helper,nouveau snd_hda_codec 190010 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hwdep 13613 1 snd_hda_codec snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel btusb 18291 0 snd_page_alloc 18798 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 i2c_algo_bit 13564 1 nouveau snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30417 1 snd_seq_midi snd_seq 61930 2 snd_seq_midi_event,snd_seq_midi bluetooth 251354 22 bnep,btusb,rfcomm snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi lpc_ich 17060 0 snd_timer 29989 2 snd_pcm,snd_seq mei 46588 0 snd 69533 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device psmouse 97838 0 microcode 22923 0 soundcore 12680 1 snd video 19467 1 nouveau mac_hid 13253 0 serio_raw 13215 0 lp 17799 0 parport 46562 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 47346 0 hid 101248 2 hid_generic,usbhid ahci 30063 3 libahci 32088 1 ahci e1000e 207005 0 ptp 18668 1 e1000e pps_core 14080 1 ptp sudo lshw -c network 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) sudo iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on sudo iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results NOTE: This dmesg was done after a reboot where the network manager was continuously displaying the "disconnected" message over and over. So it must have been trying to connect at this time. My network was displayed in the list of options, as the only option despite other devices picking up 12+ access points. The router channel is set to auto. dmesg | tail -30 [ 187.418446] wlan0: associated [ 190.405601] wlan0: disassociated from 00:14:d1:a8:c3:44 (Reason: 15) [ 190.443312] cfg80211: Calling CRDA to update world regulatory domain [ 190.443431] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 190.451635] cfg80211: World regulatory domain updated: [ 190.451643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 190.451648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451652] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.824451] wlan0: authenticate with 00:14:d1:a8:c3:44 [ 191.850608] wlan0: send auth to 00:14:d1:a8:c3:44 (try 1/3) [ 191.884604] wlan0: send auth to 00:14:d1:a8:c3:44 (try 2/3) [ 191.886309] wlan0: authenticated [ 191.886579] rt2800usb 3-5.3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 191.886588] rt2800usb 3-5.3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 191.889556] wlan0: associate with 00:14:d1:a8:c3:44 (try 1/3) [ 192.001493] wlan0: associate with 00:14:d1:a8:c3:44 (try 2/3) [ 192.040274] wlan0: RX AssocResp from 00:14:d1:a8:c3:44 (capab=0x431 status=0 aid=3) [ 192.044235] wlan0: associated [ 193.948188] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 193.981501] cfg80211: Calling CRDA to update world regulatory domain [ 193.984080] cfg80211: World regulatory domain updated: [ 193.984082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 193.984084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) The router uses MAC filtering, and security is WPA PSK with cipher as auto. So, any ideas? Or is the solution just to not use 13.04 unless you have a wired connection? (I don't have this option.) If so, please just tell me straight. I survived 9.04 Jaunty, and I can survive 13.04 Raring. Update #1 Results from trying Wild Man's first answer: jii@conan:~$ echo "options rt2800usb nohwcrypt=y" | sudo tee /etc/modprobe.d/rt2800usb.conf options rt2800usb nohwcrypt=y jii@conan:~$ sudo modprobe -rfv rt2800usb rmmod rt2800usb rmmod rt2800lib rmmod crc_ccitt rmmod rt2x00usb rmmod rt2x00lib rmmod mac80211 rmmod cfg80211 jii@conan:~$ sudo modprobe -v rt2800usb insmod /lib/modules/3.10.0-031000-generic/kernel/lib/crc-ccitt.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko nohwcrypt=y I tried: gksudo gedit /etc/pm/power.d/wireless but I didn't have the package. It said to install gksu. I tried that, but of course, not having Internet, I didn't get the package. So instead I did: sudo gedit /etc/pm/power.d/wireless Which created the file. Here is the body: #!/bin/sh /sbin/iwconfig wlan0 power off I then rebooted. No change. I tried adding exit 0 to the bottom of the wireless file, and rebooted. No change. Please note that this is a desktop machine. I'm assuming power management is primarily for laptops, but the iwconfig does state that power management is on, so who knows. The recommended router changes I did not do, since the current router settings are (I think) required for some of the older devices I have, and because the current settings work on all my modern devices including Ubuntu 12.04 and Windows 7. I do appreciate the advice though, and I'll look into it when I have time. Anything else to try? Update #2 I booted into Ubuntu 12.04.3 from a dvd, and the same problems exist. I have a separate old desktop machine with 12.04 installed that has no wireless problems at all. So obviously the problem is wireless hardware compatibility in both 12.04.03 LTS and 13.04. Update #3 The same problems exist even when using a wired connection. I plugged an ethernet cable directly to the router and the network manager added an "Auto Ethernet" entry, but it cannot establish a connection to it. So the problem is not specific to wireless. Meanwhile, I purchased a Trendnet N300 wireless USB adapter, TEW-664UB. I plugged it in, but I have no idea how to get Ubuntu to try and use it. Can anyone tell me how? Can I download a package on another computer and copy the .deb over to do an install, etc? I'm installing windows 7 to double check that the internet connection works there and it's not just some magically faulty hardware. Thanks for your help.

  Read the article

• How to disable "N" Wireless Mode RTL8192 (Thinkpad Edge 15 Core i5) in natty

  - by Gustavo Rubio

  I've seen many owners of thinkpad edges which are supossed to be linux-friendly having problems with wireless adapter. I've found several links inside askubuntu and in ubuntuforums which have a lot of work-arounds for those problems, mine seems to be wierd though. I use my laptop on both my office and at home. At home I have a router which is A/B/G and here at home the wireless connection works just fine, using a WEP key. But in work I have a B/G/N wireless router and it doesn't work, my guess is that this adapter works with N modes but somehow this is buggy in the bundled driver in natty. I've tried to disable the "N" mode in the router but that didn't work. Later I went to realtek website, downloaded their driver and compiled myself, kinda seems to work most of the time but sometimes some websites keep trying to load or load just parts of it and images start to look like their links are broken and so on, much like what you get when you were loading a page and suddenly the connection is lost. This problem, as I said, is only using the realtek driver from their website. Dmesg gives me this a lot of these: [ 5869.049454] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5 [ 5879.240563] DHCP pkt src port:68, dest port:67!! So I thougth I might as well switch back to the original driver which seems to work just fine on A/B/G wireless networks but not on N networks so if anybody knows how to disable that mode from within the driver please let us know :) Thanks in advance! PS: I do found a link to a similar question and it was answered but let me remind you I'm NOT using the intel version of wireless for my thinkpad but the realtek (RTL8192SvB)

  Read the article

• Suddely internet is not accessible

  - by user189708

  I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

  Read the article

• Going on 15 months for me...

  - by Ratman21

  About 5 face to face interviews, 4 telephone ones and except for the two weeks Census Job. But, after 15 months looking for work, I am still with out a JOB. What is wrong here or with me? Let’s see, hard worker (check), self motivated to do well on a Job (Check), Certified CompTIA A+, Security+  and Network+ Technician (Check), 20 + years experience in “IT” (CHECK), in good health, in 20 years of work only 15 days off due to health issues (Check), 18 years experience as technical Help Desk support (Check), can still work better than younger personal (Check), Strong trouble shooting skills for software, computer hard ware and circuit issues (Check) and Multiple software languages (Hey I have done some programming) Check. Hmm I don’t see any problem with me (of course I could have missed something, please let me know if you see what I am missing).    Now as to what have I been up to since I last blogged. The same things of course, Job hunting, job hunting and study.   I have set up sim of my home LAN and will be adding a wireless print server to the sim and in real life, soon.  I was able to pull up and copy the examples of Cisco router commands that I had on my old lap top, to my newer PC. Every time I used a new command while working the NOC on my last job.   I would cut and past a copy of the command on the router (and what it did) I was working on.  Along with notes on the problem and commands use for same router. I used these to make documentation for on how to handle these types of issues, for the other Operation Techs. My old notes are helping me in studying for the CCENT test.    As to Love Dare, I think it will take more like 40 weeks, than the 40 days of the book. Yes I am making progress, slow but, it is progress. I will have more on that in my next blog.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >