Search Results

Search found 2714 results on 109 pages for 'extremely frustrated'.

Page 72/109 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Bring Office 2003 Menus Back to 2010 with UBitMenu

    - by Matthew Guay
    Are you having trouble getting used to the Ribbon interface in Office 2010?  Here’s how you can roll back the clock a bit and bring back the familiar menus and toolbars from 2003. The Office 2007 Ribbon was both praised and criticized.  While many users felt they were more productive with the new interface, others felt frustrated searching for commands they had memorized in older versions of Office.  Now, with Office 2010, the ribbon interface has been brought to every app in the Office suite, and is integrated into many newer programs from Microsoft. If you’re moving from Office 2003, using UBitMenu allows you to add the old familiar menus back along with the new Ribbon interface for an easier learning curve. Also, with the customizability of Office 2010, we can strip away the extra Ribbon tabs to make it more like 2003. Get the 2003 Menus and Toolbars Back in Office 2010 Download UBitMenu (link below), and install as normal.  Make sure all of your Office programs are closed during the installation.  This handy utility is very small, and installed amazingly quick. Open Word, Excel, or PowerPoint and there’s now a new Menu tab beside Home in the Ribbon.  Now you can access all of your favorite old Office commands in the familiar menus, and access many of the newer Office features such as SmartArt.   Here’s a close-up of the toolbar.  Notice that the layout is very similar to that of Word 2003. You can access all of the new Transitions in PowerPoint 2010 from the menu bar.   The menu in Excel even included support for the new PivotTable and PivotCharts Wizard. One problem we noticed was that the toolbars were condensed to a drop-down menu if the Office window was less than 870px wide.  This may be a frustration to users with low-resolution displays, and you might want to use the Office Apps maximized. Get Rid of the Ribbon Now that you’ve got the old menus back, you can get rid of the extra ribbon tabs if you’d like.  Office 2010 lets you customize your ribbon and remove tabs, so let’s get rid of all the other tabs except for our new Menu tab.  In our example we’re using Word, but you can do it in Excel or PowerPoint the same way. Click the File tab and select Options. Alternately, in the Menu tab, select Tools and then Word Options. Select Customize Ribbon on the left sidebar, then uncheck the boxes beside all the ribbon tabs you want to hide on the right.  Click Ok when you’re finished. While you’re at it, you can change the default color scheme as well. Note: The color change will automatically change the color scheme in all of the Office apps, so you’ll only need to do that once. Now the ribbon only has 2 tabs…the File tab for the new Backstage View, and the UBitMenu tab we just installed.  It almost has the appearance Word 2003, but with the new features of Word 2010!  You’ll need to repeat these steps in Excel and PowerPoint if you want to customize their ribbon the same.   Conclusion If you’ve been having a hard time getting used to Office 2010, UBitMenu is a great way to get familiar with the new interface, or simply stay productive with your old tricks.  We do wish it supported the other Office applications like OneNote and Outlook. That doesn’t make it a deal breaker though, it can make the learning curve easier in Word, PowerPoint, and Excel. UBitMenu is free for personal use, and available at a very reasonable price for businesses. If you’re using Office 2007 and not a fan of the Ribbon, UBitMenu works for it as well. Download UBitMenu Similar Articles Productive Geek Tips How To Bring Back the Old Menus in Office 2007Upgrade Office 2003 to 2010 on XP or Run them Side by SideHow to Find Office 2003 Commands in Office 2010Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Speed Up Windows With ReadyBoost Awesome World Cup Soccer Calendar Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets

    Read the article

  • How small (spec wise) can a virtual machine be and still boot up and run some sort of OS?

    - by IllvilJa
    One of the advantages with virtual machines is that you can be very flexible with their sizes. If the host system permits it, you can have a very large virtual machine with a lot of virtual RAM and disk. Also, you can decide to go the other way around, to give the virtual machine a very modest amount of RAM and disk and then choose and configure the OS appropriately. The question is, how small virtual machines have people managed to setup (and get to both boot up and to run)? Virtual machines doing something usuful is preferable, even if I know "useful" in this context is awfully subjective, but laboratory-cases with a configuration stripped beyond common sense could be intresting as well, just to see what people manage to boot and run. Quite open ended question and quite academic, but think of it: an extremely small VM (which still does something useful) takes very little memory and disk and can be quite quickly saved to and restored from disk. If it's also gentle on CPU resources, one might consider having a huge number of such VMs up and running on a host. (Imagine a VM running just an old Commodore 64 or Commodore Amiga in it. Ok, way wrong CPU architecture for modern Virtualization software running on a x86-based PC but still an interesting thought. You could have quite a few such small VMs running on a modern PC.)

    Read the article

  • Windows XP Installation problems

    - by Samurai Waffle
    I'm having trouble installing Windows XP on a computer... My friend gave me her old computer, it was riddled with viruses and ran extremely slow. I did my best to clean it out, and after a bit I discovered it had a boot sector virus. So I downloaded the Ultimate Boot CD (installed it on a flash drive), and ran Darik's nuke and boot to completely wipe the hard drive. I then tried to reinstall Windows XP from a USB drive... It doesn't work. The computer just stalls and never boots. The computers dvd drive doesn't work, so I borrowed a spare drive that another friend had, and tried to run a Windows XP cd. For a bit I got the stop 7B error, but now it just stalls like the USB drive does. Since then I've booted back into the Ultimate Boot CD, and ran partition magic. Repartitioned the Hard Drive, and copied the files on the Windows cd to the hard drive. I was wondering if there is any way I can make it run the setup.exe off the hard drive. I have the UBCD at my disposal, but have yet to come up with a way to do it. Any help is greatly appreciated.

    Read the article

  • Intel Atom overheating in ASUS EEE Box 1501P

    - by Sergey L.
    I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

    Read the article

  • Any way to bring my laptop battery back to life?

    - by Josh
    Recently my laptop battery will get extremely hot (definitely hotter than it should get) when I charge it. After that I usually end up removing it once it's fully charged to let it cool down, which takes a couple hours... Question is, is my battery dead? My last battery I had that died just ended up lasting 2 - 3 minutes on battery, no weird heat issues. And is there any way to possibly fix this? Probably not but I won't be able to get a replacement anytime soon. UPDATE: A few days ago when this happened and it cooled down, assuming it was fully charged, I ran my laptop on battery, and the battery life lasted about 10 minutes and then the laptop shutdown. I then plugged it in later and charged it back up, and for a while I had a orange light blinking on my laptop - which I assumed meant the battery was dead, especially since I got 10 minutes battery life. Then today, I turned my laptop on and was surprised to see that the battery was at 20% and charging (it's been plugged in since the incident above, so it should have been fully charged when I shut it off) I let it charge up, and as usual it got pretty hot around the time it was fully charged. So I turned my laptop off and pulled the battery out to let it cool down Now the thing is, just now I tried running it on battery, and it's been going for an hour now... so maybe its not dead? (also the orange light is no longer blinking...) Thanks in advance if anyone knows whats going on, and how to fix it, if its fixable =] EDIT: Some info if it helps... my laptop is about 2 years ago, and it's an Asus K50ID. I know laptop batteries usually don't last more than a year but I'm trying to keep this one going for as long as I can.

    Read the article

  • Inter-VLAN Malicious Code Scanning

    - by Jackthedog
    I am trying to find an inbuilt solution on a Cisco Catayst 3750X Switch to scan all traffic routed from one VLAN to another for malicious code. The situation is that we currently have a development environment which is currently being redesigned to upgrade the network infrastructure to use the 3750X switches to manage server and workstation connectivity as well as inter-VLAN routing. We also have another system that is responsible for taking the builds created on the development environment and imaging various HDDs. Because these are two separate systems, we have a requirement in the workplace to anti-virus scan any data transferred between these systems. This is done by copying the data from the originating system to external USB HDD, scanning in a standalone workstation and then copying the data on to the receiving system. As you can imagine this is extremely tedious and impractical most of the time... (I don't make the rules). Anyway, with this redesign going on, we would like to join the imaging system to the network infrastructure of the development system, keeping separation by the use of VLANs and restricting traffic by using ACLs. As we still have the requirement to scan all traffic I would like to configure some sort of malicious code scanning when ever traffic is routed between these VLANs. I am aware I could install a separate in-line IPS/IDS device, however both systems will be using multiple ports on the switch (obviously), and we won't be able to put a device on each port. I would would prefer not to add additional hardware if the 3750x switch is capable of doing the job. Is anyone aware of any Cisco solution that I could use here, that ideally can be incorporated into the 3750x switch? Thanks in advance.

    Read the article

  • What are some alternatives to word processing with Markdown?

    - by Hassan
    I've used MS Word-style editors for a long time, but I never got used to how unintuitive and cumbersome they are. I'm not talking specifically about MS Word, but also other editors that seem to mimic Word, like OpenOffice, NeoOffice, etc. I've found myself preferring to write in Markdown (much like on this site). I've found a few good Markdown editors, and I like using them a lot more than using Word-style editors. Here is what they generally look like: As you can see, it works much differently than a Word-style editor. This is a generally cleaner way of writing, since formatting is done right in the text, and is extremely simple to use (no highlighting some text, then clicking a button in some menu you have to find). Although editing text this way is great, I've realized that the syntax can only be used for very specific needs (bullets, numbered lists, headings and sub-headings, bold, italic, and some other common ones). However, many features are missing. Here are some features that would be nice in a word processor: Tables. Indenting paragraphs. Good image support (you can link to images, but not add them, since Markdown is just text). More simple to use than Word and its cronies. Cross-platform. Some of these can be fixed with in-line HTML, but nobody wants to do that. It seems Markdown was designed for editing text on the internet. Is there a similar setup that works better for desktop word processors?

    Read the article

  • SQLAuthority News – 7th Anniversary of Blog – A Personal Note

    - by Pinal Dave
    Special Day Today is a very special day – seven years ago I blogged for the very first time.  Seven years ago, I didn’t know what I was doing, I didn’t know how to blog, or even what a blog was or what to write.  I was working as a DBA, and I was trying to solve a problem – at my job, there were a few issues I had to fix again and again and again.  There were days when I was rewriting the same solution over and over, and there were times when I would get very frustrated because I could not write the same elegant solution that I had written before.  I came up with a solution to this problem – posting these solutions online, where I could access them whenever I needed them.  At that point, I had no idea what a blog was, or even how the internet worked, I had no idea that a blog would be visible to others.  Can you believe it? Google it on Yahoo! After a few posts on this “blog,” there was a surprise for me – an e-mail saying that someone had left me a comment.  I was surprised, because I didn’t even know you could comment on a blog!  I logged on and read my comment.  It said: “I like your script,but there is a small bug.  If you could fix it, it will run on multiple other versions of SQL Server.”  I was like, “wow, someone figured out how to find my blog, and they figured out how to fix my script!”  I found the bug, I fixed the script, and a wrote a thank you note to the guy.  My first question for him was: how did you figure it out – not the script, but how to find my blog?  He said he found it from Yahoo Search (this was in the time before Google, believe it or not). From that day, my life changed.  I wrote a few more posts, I got a few more comments, and I started to watch my traffic.  People were reading, commenting, and giving feedback.  At the end of the day, people enjoyed what I was writing.  This was a fantastic feeling!  I never thought I would be writing for others.  Even today, I don’t feel like I am writing for others, but that I am simply posting what I am learning every day.  From that very first day, I decided that I would not change my intent or my blog’s purpose. 72 Million Views – 2600 Posts – 57000 comments – 10 books – 9 courses Today, this blog is my habit, my addiction, my baby.  Every day I try to learn something new, and that lesson gets posted on the blog.  Lately there have been days where I am traveling for a full 24 hours, but even on those days I try to learn something new, and later when I have free time, I will still post it to the blog.  Because of this habit, this blog has over 72 millions views, I have written more than 2600 posts, and there are 57,000 comments and counting.  I have also written 10 books, 9 courses, and learned so many things.  This blog has given me back so much more than I ever put it into it.  It gave me an education, a reason to learn something new every day, and a way to connect to people.  I like to think of it as a learning chain, a relay where we all pass knowledge from one to another. Never Ending Journey When I started the blog, I thought I would write for a few days and stop, but now after seven years I haven’t stopped and I have no intention of stopping!  However, change happens, and for this blog it will start today.  This blog started as a single resource for SQL Server, but now it has grown beyond, to Sharepoint, Personal Development, Developer Training, MySQL, Big Data, and lots of other things.  Truly speaking, this blog is more than just SQL Server, and that was always my intention.  I named it “SQL Authority,” not “SQL Server Authority”!  Loudly and clearly, I would like to announce that I am going to go back to my roots and start writing more about SQL, more about big data, and more about the other technology like relational databases, MySQL, Oracle, and others.  My goal is not to become a comprehensive resource for every technology, my goal is to learn something new every day – and now it can be so much more than just SQL Server.  I will learn it, and post it here for you. I have written a very long post on this anniversary, but here is the summary: Thank You.  You all have been wonderful.  Seven years is a long journey, and it makes me emotional.  I have been “with” this blog before I met my wife, before we had our daughter.  This blog is like a fourth member of the family.  Keep reading, keep commenting, keep supporting.  Thank you all. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: About Me, MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL

    Read the article

  • Tomcat performing terribly for no apparent reason

    - by John
    We're running a game application .WAR on Tomcat 6 on an Amazon EC2 server, 8 core processor, 7gb RAM. The application uses a MySQL database hosted on Amazon RDS. This Facebook application takes ages to access when a mere 20-30 users are playing it. Big difference from 1-2 users. The entire .WAR is ~4mb, all static content hosted elsewhere. The server has never been close to running out of RAM. The CPU utilization has never been higher than 13.5-14%. Even with ~500 users that completely slowed everything to a standstill. The thread count or threadpools isn't close to being maxed out. I heightened maxthreads but it didn't make a noticeable difference. My theory is that Tomcat can only use one processor core, which would explain why it was slowed to a halt even though CPU usage was stably at 13-14% at the activity spike. But I'm struggling to understand why it would only use one CPU core. There is no processor cap in server.xml. The app contains several servlets (4 or 5). There is no mention of SingleThreadModel in the Java code. WHAT could be causing the application to run extremely slowly? If there is only 1-5 people on the application it runs fine. With 20-30 people it's barely contactable.

    Read the article

  • Cannot get mod_rewrite to work on Mac OSX Mountain Lion

    - by Joel Joel Binks
    I have tried everything I can think of and it still doesn't work. I am trying to get the example code from Larry Ullman's Advanced PHP book to work. His instructions were a bit lacking so I had to do some research. Here is what I have configured: username.conf <Directory "/Users/me/Sites/"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> httpd.conf LoadModule rewrite_module libexec/apache2/mod_rewrite.so DocumentRoot "/Users/me/Sites" <Directory /> Options Indexes MultiViews FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> <Directory "Users/me/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from all </Directory> .htaccess <IfModule mod_rewrite.so> RewriteEngine on RewriteBase /phplearning/ADVANCED/ch02/ # Redirect certain paths to index.php: RewriteRule ^(about|contact|this|that|search)/?$ index.php?p=$1 RewriteLog "/var/log/apache/rewrite.log" RewriteLogLevel 2 </IfModule> Nothing has worked and it won't even log to the rewrite.log file. What have I done wrong? FYI even when I set up an extremely simple rule or use the root as the rewrite base, it still fails. I have also verified the mod_rewrite module is running. I am really angry.

    Read the article

  • Why is this APC installation failing so badly?

    - by Matt
    I have multiple instances of APC running on my server with similar configurations (albeit with different cache sizes. However, one of the instances is performing extremely poorly, and I have no idea why (100% cache fragmentation, high miss rate). The runtime settings I'm using are as follows (pretty much out of the box): apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.shm_segments 1 apc.shm_size 10M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 APC is version 3.1.6, PHP is 5.3.3-1ubuntu9.5. I've tried restarting Apache multiple times, so this isn't a freak instance. The instance with problems is simply running Wordpress with a few plugins installed. All other instances (~4) on the server are running perfectly fine with almost 100% hit rates and 0% fragmentation; for example this instance is holding a website built using the Symfony framework. Any help would be much appreciated; I haven't had much experience with APC and was hoping for it to be an out-of-the-box speed boost ;).

    Read the article

  • SQLAuthority Guest Post – Lessons from Life and Work by Srini Chandra (Author of 3 Lives, in search of bliss)

    - by pinaldave
    Work and life are confusing terms together. How can one consider work outside of life. Work should be part of life or are we considering ourselves dead when we are at work. I have often seen developers and DBA complaining and confused about their job, work and life. Complaining is easy and everyone can do. I have heard quite often expression – “I do not have any other option.” I requested Srini Chanda (renowned author of Amazon Best Seller 3 Lives, in search of bliss (Amazon | Flipkart) to write a guest post on this subject which developer can read and appreciate. Let us see Srini’s thoughts in his own words. Each of us who works in the technology industry carries an especially heavy burden nowadays. For, fate has placed in our hands an awesome power to shape our society and its consciousness. For that reason, we must pay more and more attention to issues of professionalism, social responsibility and ethics. Equally importantly, the responsibility lies in our hands to ensure that we view our work and career as an opportunity to enlighten and lift ourselves up. Story: A Prisoner, 20 years and a Wheel Many years ago, I heard this story from a professor when I was a student at Carnegie Mellon. A man was sentenced to 20 years in prison. During his time in prison, he was asked to turn a wheel every day. So, every day he turned the wheel. At times, when he was tired or puzzled and stopped turning the wheel, he would be flogged with a whip. The man did not know anything about the wheel other than that it was placed outside his jail somewhere. He wondered if the wheel crushed corn or if it ground wheat or something similar. He wondered if turning the wheel was useful to anyone. At the end of his jail term, he rushed out to see what the wheel was doing. To his disappointment, he found that the wheel was not connected to anything. All these years, he had been toiling for nothing. He gave a loud, frustrated shout and dropped dead. How many of us are turning wheels wondering what it is connected to? How many of us have unstated, uncaring attitudes towards our careers? How many of us view work as drudgery, as no more than a way to earn that next paycheck? How many of us have wondered about the spiritually uplifting aspect of work? Can a workforce that views work as merely a chore, be ethical? Can it produce truly life enhancing technology? Can it make positive contributions to the quality of life of a society? I think not. Thanks to Pinal and you, his readers, for giving me this opportunity to share my thoughts in a series of guest posts. I’d like to present a few ways over the next few weeks, in which we can tap into the liberating potential of work and make our lives better in the process. Now, please allow me to tell you another version of the story that the good professor shared with us in the classroom that day. Story: A Prisoner, 20 years, a Wheel and the LIFE A man was sentenced to 20 years in prison. During his time in prison, he was asked to turn a wheel every day. So, every day he turned the wheel. At first, his whole body and mind rebelled against his predicament. So, his limbs grew weary and his mind became numb and confused. And then, his self-awareness began to grow. He began to wonder how he came to be in the prison in the first place. He looked around and saw all his fellow prisoners also turning the wheel. His wife, his parents, his friends and his children – they were all in the prison too, and turning their own wheels! He began to wonder how this came about. As he wondered more and more, he began to focus less on his physical drudgery and boredom. And he began to clearly see his inner spirit which guided him in ways that allowed him to see the world with a universal view. His inner spirit guided him towards the source of eternal wisdom and happiness. He began to see the source of happiness in everything around him – his prison bound relationships, even his jailers and in his wheel. He became a source of light to those around him. His wheel jokes and humor infected them with joy and happiness. Finally, the day came for his release from jail. He walked calmly outside the jail and laughed aloud when he saw that the wheel was not connected to anything. He knelt down, kissed it and thanked it for the wisdom it taught him. Life is the prison. The wheel is your work. Both are sacred. Both have enormous powers to teach us wisdom and bring us happiness. Whether we allow them to do so, is a choice we have to make. Over the next few weeks, I hope to share with you a few lessons that I have learnt at the wheel in my two decades of my career (prison). Thank you for reading, and do let me know what you think. Reference: Srini Chandra (3 Lives, in search of bliss), Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, T SQL, Technology

    Read the article

  • Is it possible to use rsync over sftp (without an ssh shell)?

    - by Tom Feiner
    Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

    Read the article

  • Very slow browsing shared folder XP client/host

    - by Ickster
    I have a pretty straightforward setup where I'm storing media files on an XP pro machine, and sharing the folder to be accessed by other XP pro machines around the house. (Typically, there's only one client accessing the share at a time, although there may be several with the share mounted.) It's been working just fine for years, but I've recently started having some problems. A couple of days ago, the host PC had power disconnected while it was running. It was restarted and everything seemed fine initially, but since then browsing the shared folder from client machines has been extremely slow and actually reading data is all but impossible. The problem exists in every access method I've tried: Windows Explorer, VLC dialogs, command line, etc. My first thought was that the disk was experiencing problems, but there are no problems viewing the files locally on the host machine. My second thought was that there was a network problem on the host machine, so I removed and reinstalled drivers for the NIC with no change. My third thought was that there might've been a problem elsewhere on the network, so I swapped out hardware to no avail. I'm regrouping and trying to come up with a methodical approach to figuring out what might be wrong. I would of course be thrilled if you can suggest specific problems (Microsoft KB articles, etc.) that I might check, but I'm not expecting a silver bullet. If you can help me outline an approach to identify the problem (including recommended tools, e.g., disk checkers, network analyzers, etc.) I'd greatly appreciate it.

    Read the article

  • MCM Lab exam this week

    - by Rob Farley
    In two days I’ll’ve finished the MCM Lab exam, 88-971. If you do an internet search for 88-971, it’ll tell you the answer is –883. Obviously. It’ll also give you a link to the actual exam page, which is useful too, once you’ve finished being distracted by the calculator instead of going to the thing you’re actually looking for. (Do people actually search the internet for the results of mathematical questions? Really?) The list of Skills Measured for this exam is quite short, but can essentially be broken down into one word “Anything”. The Preparation Materials section is even better. Classroom Training – none available. Microsoft E-Learning – none available. Microsoft Press Books – none available. Practice Tests – none available. But there are links to Readiness Videos and a page which has no resources listed, but tells you a list of people who have already qualified. Three in Australia who have MCM SQL Server 2008 so far. The list doesn’t include some of the latest batch, such as Jason Strate or Tom LaRock. I’ve used SQL Server for almost 15 years. During that time I’ve been awarded SQL Server MVP seven times, but the MVP award doesn’t actually mean all that much when considering this particular certification. I know lots of MVPs who have tried this particular exam and failed – including Jason and Tom. Right now, I have no idea whether I’ll pass or not. People tell me I’ll pass no problem, but I honestly have no idea. There’s something about that “Anything” aspect that worries me. I keep looking at the list of things in the Readiness Videos, and think to myself “I’m comfortable with Resource Governor (or whatever) – that should be fine.” Except that then I feel like I maybe don’t know all the different things that can go wrong with Resource Governor (or whatever), and I wonder what kind of situations I’ll be faced with. And then I find myself looking through the stuff that’s explained in the videos, and wondering what kinds of things I should know that I don’t, and then I get amazingly bored and frustrated (after all, I tell people that these exams aren’t supposed to be studied for – you’ve been studying for the last 15 years, right?), and I figure “What’s the worst that can happen? A fail?” I’m told that the exam provides a list of scenarios (maybe 14 of them?) and you have 5.5 hours to complete them. When I say “complete”, I mean complete – you don’t get to leave them unfinished, that’ll get you ‘nil points’ for that scenario. Apparently no-one gets to complete all of them. Now, I’m a consultant. I get called on to fix the problems that people have on their SQL boxes. Sometimes this involves fixing corruption. Sometimes it’s figuring out some performance problem. Sometimes it’s as straight forward as getting past a full transaction log; sometimes it’s as tricky as recovering a database that has lost its metadata, without backups. Most situations aren’t a problem, but I also have the confidence of being able to do internet searches to verify my maths (in case I forget it’s –883). In the exam, I’ll have maybe twenty minutes per scenario (but if I need longer, I’ll have to take longer – no point in stopping half way if it takes more than twenty minutes, unless I don’t see an end coming up), so I’ll have time constraints too. And of course, I won’t have any of my usual tools. I can’t take scripts in, I can’t take staff members. Hopefully I can use the coffee machine that will be in the room. I figure it’s going to feel like one of those days when I’ve gone into a client site, and found that the problems are way worse than I expected, and that the site is down, with people standing over me needing me to get things right first time... ...so it should be fine, I’ve done that before. :) If I do fail, it won’t make me any less of a consultant. It won’t make me any less able to help all of my clients (including you if you get in touch – hehe), it’ll just mean that the particular problem might’ve taken me more than the twenty minutes that the exam gave me. @rob_farley PS: Apparently the done thing is to NOT advertise that you’re sitting the exam at a particular time, only that you’re expecting to take it at some point in the future. I think it’s akin to the idea of not telling people you’re pregnant for the first few months – it’s just in case the worst happens. Personally, I’m happy to tell you all that I’m going to take this exam the day after tomorrow (which is the 19th in the US, the 20th here). If I end up failing, you can all commiserate and tell me that I’m not actually as unqualified as I feel.

    Read the article

  • Productivity vs Security [closed]

    - by nerijus
    Really do not know is this right place to ask such a questions. But it is about programming in a different light. So, currently contracting with company witch pretends to be big corporation. Everyone is so important that all small issues like developers are ignored. Give you a sample: company VPN is configured so that if you have VPN then HTTP traffic is banned. Bearing this in mind can you imagine my workflow: Morning. Ok time to get latest source. Ups, no VPN. Let’s connect. Click-click. 3 sec. wait time. Ok getting source. Do I have emails? Ups. VPN is on, can’t check my emails. Need to wait for source to come up. Finally here it is! Ok Click-click VPN is gone. What is in my email. Someone reported a bug. Good, let’s track it down. It is in TFS already. Oh, dam, I need VPN. Click-click. Ok, there is description. Yea, I have seen this issue in stachoverflow.com. Let’s go there. Ups, no internet. Click-click. No internet. What? IPconfig… DHCP server kicked me out. Dam. Renew ip. 1..2..3. Ok internet is back. Google: site: stachoverflow.com 3 min. I have solution. Great I love stackoverflow.com. Don’t want to remember days where there was no stackoveflow.com. Ok. Copy paste this like to studio. Dam, studio is stalled, can’t reach files on TFS. Click-click. VPN is back. Get source out, paste my code. Grand. Let’s see what other comments about an issue in stackoverflow.com tells. Hmm.. There is a link. Click. Dammit! No internet. Click-click. No internet. DHCP kicked me out. Dammit. Now it is even worse: this happens 3-4 times a day. After certain amount of VPN connections open\closed my internet goes down solid. Only way to get internet back is reboot. All my browser tabs/SQL windows/studio will be gone. This happened just now when I am typing this. Back to issue I am solving right now: I am getting frustrated - I do not care about better solution for this issue. Let’s do it somehow and forget. This Click-click barrier between internet and TFS kills me… Sounds familiar? You could say there are VPN settings to change. No! This is company laptop, not allowed to do changes. I am very very lucky to have admin privileges on my machine. Most of developers don’t. So just learned to live with this frustration. It takes away 40-60 minutes daily. Tried to email company support, admins. They are too important ant too busy with something that just ignored my little man’s problem. Politely ignored. Question is: Is this normal in corporate world? (Have been in States, Canada, Germany. Never seen this.)

    Read the article

  • ASA Slow IPSec Performance with Inconsistent Window Size

    - by Brent
    I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremely poor performance when traffic passes over the IPSec VPN. CPU on the devices is ~13%, Memory at 408 MB, and active VPN sessions 2. The load on both of the the devices is particularly low. Latency between the two sites is ~40ms. Screenshot of wireshark file transfer between the two hosts over the firewall IPSec VPN performing at 10MBPS. Note the changing window size. http://imgur.com/wGTB8Cr Screenshot of wireshark file transfer between the two hosts over the firewall not going over IPSec performing at 55MBPS. Constant window size. http://imgur.com/EU23W1e I'm showing an inconsistent window size when transferring over the IPSec VPN ranging in 46,796 to 65535. When performing at 55+MBPS, the window size is consistently 65,535. Does this show a problem in my configuration of the IPSec VPN in the ASA or a Layer1/2 issue? Using ping xxxxxx -f -l I finally get a non-fragment at 1418 bytes so 1418+28 for IP/ICMP headers = 1446. I know that I have 1500 set on the ASA and Ethernet. I do have "Force Maximum segment size for TCP proxy connection to be" "1380" bytes set under Configuration Advanced TCP Options on the ASA. Using IPERF, I am getting a "TCP Window Full" every few seconds and ~3 MBPS performance. http://imgur.com/elRlMpY Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

    Read the article

  • Goals for 2010 Retrospective

    - by Brian Jackett
    As we approach the end of 2010 I’d like to take a  few minutes to reflect back on this past year and revisit the goals that I set for myself at the beginning of the year (click here to see those goals).  I feel it is important to track your goals not only to see if you accomplished them but also to see what new directions in life you pursued.  Once we enter into 2011 I’ll follow up with a new post on goals for the new year. Professional Blog – This year I intended to write at least 2 posts a month.  Looking back I far surpassed that goal by writing 47 posts (this one being my 48th).  As with many things in life, quantity does not mean quality.  A good example is a number of my posts announcing upcoming speaking engagements and providing links to presentation slides and scripts.  That aside, I like to at least keep content relatively fresh on this blog  which I was able to accomplish.  At the same time I’ve gotten much more comfortable in my blogging style and it has become much easier to write. Speaking – I didn’t define a clear goal for speaking engagements, but had a rough idea of wanting to speak at 2-3 events.  Once again I far exceeded that number by speaking at 10 separate events and delivering 12+ presentations.  I’m very thankful for all of the opportunities that I was given and all of the wonderful people I have met as a result. Volunteering – This year I intended to help out with the COSPUG (now Buckeye SPUG) steering committee and Stir Trek conference.  I fulfilled both goals and as well as taking on lead organizer duties for the first ever SharePoint Saturday Columbus.  Each of these events and groups turned out to be successful and I was glad to be a part of them all.  I look forward to continuing to volunteer with each next year in some capacity. Android Development – My goal for getting into Android development was a late addition, but one I didn’t necessarily fulfill.  I spent a couple nights downloading the tools, configuring my environment, and going through some “simple” tutorials.  I say “simple” because in my opinion the tutorials were not laid out very well, took a long time to get running properly, and confused me more than helped.  After about a week I was frustrated with the process and didn’t think it was a good use of my time.  On a side note, I’ve dabbled in Windows Phone 7 development over the past few months and have been very excited by how easy and intuitive it was to get started and develop some proof of concepts. Personal Getting in Shape – I had intended to play on recreational sports leagues and work out on a semi-regular basis.  For the most part I fulfilled this goal by playing on various softball and volleyball leagues as well as using the gym.  At the same time I had some major setbacks.  In the spring I badly sprained my ankle and got hit in the knee with a softball which kept me inactive for almost 2 months.  More recently I broke my knuckle (click here to read about it) which I am still recovering from. Volunteering – On the volunteering front I kept my commitments at my parish’s high school youth group.  As for other volunteering opportunities I got involved with a great organization called Columbus Gives Back (website).  I’ve volunteered with them a few times and really enjoy their goal to provide opportunities to people with busy schedules.  They  offer a variety of events typically after work hours and spread out around Columbus with no set commitments on time you need to put in.  If you have the time or motivation I highly recommend them. House/Condo – I had been thinking of buying a house or condo this past summer, but decided to extend my apartment lease for another year instead.  I have begun the search for a place in the past few weeks and am excited begin the process of owning a home. Conclusion     This year I was able to set and achieve many of my goals.  For next year I’ll try to put more specific numbers to all of my goals.  If any of you readers set goals for 2011 feel free to send me a link as I’d love to see what you are aiming to accomplish.  Have a great end of 2010 and best wishes for the start of 2011!       -Frog Out

    Read the article

  • Adding a Network Loopback Adapter to Windows 8

    - by Greg Low
    I have to say that I continue to be frustrated with finding out how to do things in Windows 8. Here's another one and it's recorded so it might help someone else. I've also documented what I tried so that if anyone from the product group ever reads this, they'll understand how I searched for it and might try to make it easier.I wanted to add a network loopback adapter, to have a fixed IP address to work with when using an "internal" network with Hyper-V. (The fact that I even need to do this is also painful. I don't know why Hyper-V can't make it easy to work with host system folders, etc. as easily as I can with VirtualPC, VirtualBox, etc. but that's a topic for another day).In the end, what I needed was a known IP address on the same network that my guest OS was using, via the internal network (which allows connectivity from the host OS to/from guest OS's).I started by looking in the network adapters areas but there is no "add" functionality there. Realising that this was likely to be another unexpected challenge, I resorted to searching for info on doing this. I found KB article 2777200 entitled "Installing the Microsoft Loopback Adapter in Windows 8 and Windows Server 2012". Aha, I thought that's what I'd need. It describes the symptom as "You are trying to install the Microsoft Loopback Adapter, but are unable to find it." and that certainly sounded like me. There's a certain irony in documenting that something's hard to find instead of making it easier to find. Anyway, you'd hope that in that article, they'd then provide a step by step example of how to do it, but what they supply is this: The Microsoft Loopback Adapter was renamed in Windows 8 and Windows Server 2012. The new name is "Microsoft KM-TEST Loopback Adapter". When using the Add Hardware Wizard to manually add a network adapter, choose Manufacturer "Microsoft" and choose network adapter "Microsoft KM-TEST Loopback Adapter".The trick with this of course is finding the "Add Hardware Wizard". In Control Panel -> Hardware and Sound, there are options to "Add a device" and for "Device Manager". I tried the "Add a device" wizard (seemed logical to me) but after that wizard tries it's best, it just tells you that there isn't any hardware that it thinks it needs to install. It offers a link for when you can't find what you're looking for, but that leads to a generic help page that tells you how to do things like turning on your printer.In Device Manager, I checked the options in the program menus, and nothing useful was present. I even tried right-clicking "Network adapters", hoping that would lead to an option to add one, also to no avail.So back to the search engine I went, to try to find out where the "Add Hardware Wizard" is. Turns out I was in the right place in Device Manager, but I needed to right-click the computer's name, and choose "Add Legacy Hardware". No doubt that hasn't changed location lately but it's a while since I needed to add one so I'd forgotten. Regardless, I'm left wondering why it couldn't be in the menu as well.Anyway, for a step by step list, you need to do the following:1. From Control Panel, select "Device Manager" under the "Devices and Printers" section of the "Hardware and Sound" tab.2. Right-click the name of the computer at the top of the tree, and choose "Add Legacy Hardware".3. In the "Welcome to the Add Hardware Wizard" window, click Next.4. In the "The wizard can help you install other hardware" window, choose "Install the hardware that I manually select from a list" option and click Next.5. In the "The wizard did not find any new hardware on your computer" window, click Next.6. In the "From the list below, select the type of hardware you are installing" window, select "Network Adapters" from the list, and click Next.7. In the "Select Network Adapter" window, from the Manufacturer list, choose Microsoft, then in the Network Adapter window, choose "Microsoft KM-TEST Loopback Adapter", then click Next.8. In the "The wizard is ready to install your hardware" window, click Next.9. In the "Completing the Add Hardware Wizard" window, click Finish.Then you need to continue to set the IP address, etc.10. Back in Control Panel, select the "Network and Internet" tab, click "View Network Status and Tasks".11. In the "View your basic network information and set up connections" window, click "Change adapter settings".12. Right-click the new adapter that has been added (find it in the list by checking the device name of "Microsoft KM-TEST Loopback Adapter"), and click Properties.   

    Read the article

  • One Comcast Business Gateway, One Router, Two Web Servers

    - by Kevin Scheidt
    I have a Comcast business account with a router and a web server (info) attached. behind the router there are multiple computers and a second web server (info) which also serves as a file server. (info) has two nics in it. One direct to comcast and one connected to the router. It needs to serve the world it's websites. It needs however, to also be able to see all the internal computers and (com)'s served files. With just 1 nic (the one connected to the router, not comcast), (info) works fine but no one outside can see it. (com) services port 80 and (info) needs to handle port 80 as well. I have two domain names registered, and 5 static ip's from comcast. right now h t t p: / /www.graceamazing.com handled by (com) works fine and h t t p: / /www.graceamazing.com:1307 handled by (info) works fine. but as soon as I enable the 2nd nic in (info) h t t p: / /www.graceamazing.info runs extremely slow (Horribly slow). however, h t t p: / /www.graceamazing.com:1307 and .com work fine. (com) has an ip address via the router 70.89.233.41 (info) has a ip addy of 70.89.233.46 via comcast (2nd nic) and a internal ip of 192.168.x.100 via static behind the router. Any suggestions or changes to make that will make h t t p: / /www.graceamazing.info perform with the same speed it has when going through h t t p: / /graceamazing.com:1307 is there a setting I should check / could have misssed?

    Read the article

  • Sluggish Windows SBS 2003

    - by TomWilsonFL
    One of my customers has a Windows 2003 Small Business Server which at this point is basically the DC, DNS, Fileserver and Symantec Protection Manager. I have disabled Exchange because I moved their mail to Google Apps. The server is extremely sluggish when doing anything. It is most noticeable when a dialog box is open (say the System properties), and you try to change tabs. This is usually instant, but on this machine can take 3-5 seconds. What additional services / packages can I uninstall from this machine knowing that it is only performing the above roles? Will removing the "Small Business Server" package in Add / Remove Programs get rid of a few unnecessary things? Any other thoughts? P.S. I know Symantec Endpoint and the Protection Manager are hogs, but I have nothing to replace the solution with at the moment. Thanks, Tom UPDATE: I looked over the different performance metrics, but nothing stood out as a problem. One of my friends mentioned Symantec's log and temp files can get quite huge and slow things down, so I ran CCleaner on the machine and found close to 3 GB of Symantec "stuff." Removed that and now the machine is MUCH better. I am still unsure why the data just sitting there would cause such a slowdown. The drive is not even near full. The only thing I can imagine is that Symantec must have to run through this stuff now and then.

    Read the article

  • Router recommendation to virtualize 800 IPs

    - by delerious010
    I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

    Read the article

  • exporting clip in Final Cut Pro X or related video editing software on Mac

    - by user46976
    I'm using Final Cut Pro X to edit a 1 hour long video. I made individual clips from it in Final Cut Pro X and I want to save just these clips, some of which are only 5 mins long. How can I do this? I tried using the app ClipExporter, but it won't even read my .fcpxml file, it just says that it's not a valid file and gives no helpful information at all. Another method I tried was to assign roles to each clip. I made one clip, 5 mins long, and then used Share - Export in Final Cut Pro X and chose the option to export roles as separate files. However, the export still estimates that it will take over an hour to export and so it looks like it's trying to export the whole movie, rather than the simple 5 min clip which should be exportable as a .MOV or related formats in a few minutes. How can I do this in final cut pro x? I'm also happy to switch to related video editing software as long as they are not extremely expensive. This seems like a very trivial and obvious feature: take a segment from a long movie and export just the selected region of it... I don't understand why it's so complicated to do in Final Cut Pro X. Thanks.

    Read the article

  • Collision Detection on floor tiles Isometric game

    - by Anivrom
    I am having a very hard to time figuring out a bug in my code. It should have taken me 20 minutes but instead I've been working on it for over 12 hours. I am writing a isometric tile based game where the characters can walk freely amongst the tiles, but not be able to cross over to certain tiles that have a collides flag. Sounds easy enough, just check ahead of where the player is going to move using a Screen Coordinates to Tile method and check the tiles array using our returned xy indexes to see if its collidable or not. if its not, then don't move the character. The problem I'm having is my Screen to Tile method isn't spitting out the proper X,Y tile indexes. This method works flawlessly for selecting tiles with the mouse. NOTE: My X tiles go from left to right, and my Y tiles go from up to down. Reversed from some examples on the net. Here's the relevant code: public Vector2 ScreentoTile(Vector2 screenPoint) { //Vector2 is just a object with x and y float properties //camOffsetX,Y are my camera values that I use to shift everything but the //current camera target when the target moves //tilescale = 128, screenheight = 480, the -46 offset is to center // vertically + 16 px for some extra gfx in my tile png Vector2 tileIndex = new Vector2(-1,-1); screenPoint.x -= camOffsetX; screenPoint.y = screenHeight - screenPoint.y - camOffsetY - 46; tileIndex.x = (screenPoint.x / tileScale) + (screenPoint.y / (tileScale / 2)); tileIndex.y = (screenPoint.x / tileScale) - (screenPoint.y / (tileScale / 2)); return tileIndex; } The method that calls this code is: private void checkTileTouched () { if (Gdx.input.justTouched()) { if (last.x >= 0 && last.x < levelWidth && last.y >= 0 && last.y < levelHeight) { if (lastSelectedTile != null) lastSelectedTile.setColor(1, 1, 1, 1); Sprite sprite = levelTiles[(int) last.x][(int) last.y].sprite; sprite.setColor(0, 0.3f, 0, 1); lastSelectedTile = sprite; } } if (touchDown) { float moveX=0,moveY=0; Vector2 pos = new Vector2(); if (player.direction == direction_left) { moveX = -(player.moveSpeed); moveY = -(player.moveSpeed / 2); Gdx.app.log("Movement", String.valueOf("left")); } else if (player.direction == direction_upleft) { moveX = -(player.moveSpeed); moveY = 0; Gdx.app.log("Movement", String.valueOf("upleft")); } else if (player.direction == direction_up) { moveX = -(player.moveSpeed); moveY = player.moveSpeed / 2; Gdx.app.log("Movement", String.valueOf("up")); } else if (player.direction == direction_upright) { moveX = 0; moveY = player.moveSpeed; Gdx.app.log("Movement", String.valueOf("upright")); } else if (player.direction == direction_right) { moveX = player.moveSpeed; moveY = player.moveSpeed / 2; Gdx.app.log("Movement", String.valueOf("right")); } else if (player.direction == direction_downright) { moveX = player.moveSpeed; moveY = 0; Gdx.app.log("Movement", String.valueOf("downright")); } else if (player.direction == direction_down) { moveX = player.moveSpeed; moveY = -(player.moveSpeed / 2); Gdx.app.log("Movement", String.valueOf("down")); } else if (player.direction == direction_downleft) { moveX = 0; moveY = -(player.moveSpeed); Gdx.app.log("Movement", String.valueOf("downleft")); } //Player.moveSpeed is 1 //tileObjects.x is drawn in the center of the screen (400px,240px) // the sprite width is 64, height is 128 testX = moveX * 10; testY = moveY * 10; testX += tileObjects.get(player.zIndex).x + tileObjects.get(player.zIndex).sprite.getWidth() / 2; testY += tileObjects.get(player.zIndex).y + tileObjects.get(player.zIndex).sprite.getHeight() / 2; moveX += tileObjects.get(player.zIndex).x + tileObjects.get(player.zIndex).sprite.getWidth() / 2; moveY += tileObjects.get(player.zIndex).y + tileObjects.get(player.zIndex).sprite.getHeight() / 2; pos = ScreentoTile(new Vector2(moveX,moveY)); Vector2 pos2 = ScreentoTile(new Vector2(testX,testY)); if (!levelTiles[(int) pos2.x][(int) pos2.y].collides) { Vector2 newPlayerPos = ScreentoTile(new Vector2(moveX,moveY)); CenterOnCoord(moveX,moveY); player.tileX = (int)newPlayerPos.x; player.tileY = (int)newPlayerPos.y; } } } When the player is moving to the left (downleft-ish from the viewers point of view), my Pos2 X values decrease as expected but pos2 isnt checking ahead on the x tiles, it is checking ahead on the Y tiles(as if we were moving DOWN, not left), and vice versa, if the player moves down, it will check ahead on the X values (as if we are moving LEFT, instead of DOWN). instead of the Y values. I understand this is probably the most confusing and horribly written post ever, but I'm confused myself so I'm having a hard time explaining it to others lol. if you need more information please ask!! I'm so frustrated after over 12 hours of working on it I'm about to give up.

    Read the article

  • Formula to calculate probability of unrecoverable read error during RAID rebuild

    - by OlafM
    I need to compare the reliability of different RAID systems with either consumer or enterprise drives. The formula to have the probability of success of a rebuild, ignoring mechanical problems, is simple: error_probability = 1 - (1-per_bit_error_rate)^bit_read and with 3 TB drives I get 38% probability to experience an URE (unrecoverable read error) for a 2+1 disks RAID5 (4.7% for enterprise drives) 21% for a RAID1 (2.4% for enterprise drives) 51% probability of error during recovery for the 3+1 RAID5 often used by users of SOHO products like Synologys. Most people don't know about this. Calculating the error for single disk tolerance is easy, my question concerns systems tolerant to multiple disks failures (RAID6/Z2, RAIDZ3 and RAID1 with multiple disks). If only the first disk is used for rebuild and the second one is read again from the beginning in case or an URE, then the error probability is the one calculated above squared (14.5% for consumer RAID5 2+1, 4.5% for consumer RAID1 1+2). However, I suppose (at least in ZFS that has full checksums!) that the second parity/available disk is read only where needed, meaning that only few sectors are needed: how many UREs can possibly happen in the first disk? not many, otherwise the error probability for single-disk tolerance systems would skyrocket even more than I calculated. If I'm correct, a second parity disk would practically lower the risk to extremely low values. Am I correct?

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >