Search Results

Search found 2911 results on 117 pages for 'payment gateway'.

Page 72/117 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• How to set a management IP on a Dell powerconnect 5524/5548 switch?

  - by John Little

  When you first power on a 5524, connected via the serial console, you are offered a setup wizard where you can enter the management IP/Net/Gateway and enter the admin password. HOWEVER, if you dont do this in 60 seconds, the wizard dissapears, and there seems to be no way to run it again - even if you reboot the box. No commands work in the CLI, it just gives you this prompt: If you type say enable, or login, it gives: >login Unknown parameter May be one from the following list: debug help So no commands seem to work. The CLI reference guide does not seem to have any way to run the wizard, or to set the management port or admin passwords. So by not responding in 60 secons after boot, the unit is bricked. Any ideas?

  Read the article

• Ubuntu 8.04 server is not retaining a static IP address

  - by James Pierce

  I recently setup a linux box running Ubuntu 8.04 (to match another server with 8.04). I need to insure that this box has a static IP address and I changed /etc/network/interfaces to set up the static IP address and when I run sudo /etc/init.d/networking restart it works fine for a while, but always reverts back to 10.0.1.24 after being idle for a while. I also tried stopping/removing the dhcp client, but that didn't help. sudo /etc/init.d/dhcp stop sudo apt-get remove dhcp3-client Here is my /etc/init.d/networking: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.0.1.4 netmask 255.255.255.0 broadcast 10.0.1.255 gateway 10.0.1.1 Any thoughts? Thanks.

  Read the article

• Nginx + PHP-FPM on Ubuntu giving "upstream sent invalid status" on uploading Joomla extension zip file

  - by faridv

  I have a Ubuntu server running in an ESV VM emvironment and I've installed a webserver with this configuration: Nginx 1.0.5 PHP 5.3.6 with PHP-FMP Mysql 5.1.62 I have an installation of latest version of joomla on this server and when I try to upload an install package (zip file containing joomla's extension files) I get "502 Bad Gateway" with the following error in nginx log file: 2012/05/13 11:22:21 [error] 19911#0: *20 upstream sent invalid status "-1 Copy failed" while reading response header from upstream, client: 10.10.56.70, server: localhost, request: "POST /administrator/index.php?option=com_installer&view=install HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "radio.xx.xx", referrer: "http://radio.xx.xx/administrator/index.php?option=com_installer" I've searched all over the internet and I've changed too many parameters of php configuration, fpm config and nginx config including increasing execution times and etc but my problem still remains. I'm pretty sure it has nothing to do with my Joomla and problem is in webserver but there's no usable log messages, except above message. Can anyone help me with this problem?

  Read the article

• How to disable Bluetooth auto-answer on Windows 7?

  - by MarkR

  When my BlackBerry 9630 is connected via Bluetooth to my Dell desktop running Windows 7 x64 there are a bunch of Bluetooth services enabled on Windows Advanced Audio BB Bypass service BB Desktop Service Dial-up Networking Headset Audio Gateway Remote Control Remotely Controlled Device When a call arrives on the 9630 Windows immediately answer the call. This is annoying when windows answers the phone before I even hear an audible ring and the hapless caller is saying, "hello. hello" on top of music I have playing. Does anyone know how to tell Windows not to answer the call? I want to be able to don my headset, switch audio to my headset, THEN manually answer the call.

  Read the article

• DHCP Relay V DHCP Local Cisco v 3com

  - by DefSol

  Howdy, I have a client who has a WAN with 7 sites. At one site in particular, randomly about 4-5 clients do not get an IP address. The local gateway is a cisco 871 and relay's to a windows server in a Data Center running a valid scope for the subnet. If I put in a cisco 1800 and configure a dhcp scope (disabling the scope on the server) all clients get an ip address and everything is right with the world. The Wan providing keeps saying it's a local issue although we can work around with the 1800. The provider says a 3Com switch is at fault and the 1800 does not have a local switch, and because the 871 does, means the internal switching will receive a different uplink policy. The 3Com is the only managed switch in the subnet. Any ideas greatly appreciated. Reuben

  Read the article

• DHCP Relay V DHCP Local Cisoc v 3com

  - by DefSol

  Howdy, I have a client who has a WAN with 7 sites. At one site in particular, randomly about 4-5 clients do not get an IP address. The local gateway is a cisco 871 and relay's to a windows server in a Data Center running a valid scope for the subnet. If I put in a cisco 1800 and configure a dhcp scope (disabling the scope on the server) all clients get an ip address and everything is right with the world. The Wan providing keeps saying it's a local issue although we can work around with the 1800. The provider says a 3Com switch is at fault and the 1800 does not have a local switch, and because the 871 does, means the internal switching will receive a different uplink policy. The 3Com is the only managed switch in the subnet. Any ideas greatly appreciated. Reuben

  Read the article

• Mono fast cgi not working on nginx

  - by Luka Horvatic

  I installed mono fast cgi for nginx following instructions on: http://www.mono-project.com/FastCGI_Nginx but when i try to load test aspx file i getting 502 error gateway,and following error in error log: 2011/11/28 18:49:51 [error] 5376#0: *6 upstream sent unexpected FastCGI record: 3 while reading response header from upstream, client: ipadress, server: ipadress, request: "GET /default.aspx HTTP/1.1", upstream: "fastcgi://127.0.0.1:9999", host: "ipadress" I tried different things to change but always same result,except maybe sometime in error log is number 1 or 3 instead 6.Nginx ver is 1.03 64 bit,mono and xsp latest versions. Any idea what could be wrong?

  Read the article

• Help me choose a desktop: which of these two should I buy?

  - by Sammy

  I just want the more powerful of the two: Choice 1: http://www.bestbuy.com/site/Gateway+-+Desktop+with+AMD+Phenom%26%23153%3B+II+Quad-Core+Processor/9698936.p?id=1218153428687&skuId=9698936 Choice 2: /site/HP+-+Pavilion+Desktop+with+AMD+Phenom%26%23153%3B+II+Quad-Core+Processor/9694506.p?id=1218150609828&skuId=9694506 I can't post more than one hyperlink since I am a new user, so please add bestbuy domain name before choice 2. The latter choice is a bit more expensive but not by much so I don't care about that. As for what I intend to use my machine for, just regular web surfing, light gaming, web development related work, etc. But that doesn't really matter, of these two I just want to know which is the better more powerful system and which you would buy if you were in my position.

  Read the article

• Using pfSense, OpenVPN Connects but Still Can't See the Network

  - by nicorellius

  I am having an OpenVPN issue. I have a pfSense box at home configured to allow traffic through a VPN tunnel. The client computer is Windows XP Home, behind a standard Comcast connection and a Netgear wireless router. I use OpenVPN to access my work network (from where I am trying to get out of in this post) from home (with an XP Pro machine behind pfSense), and this works fine. The client config is similar but has the changes specific to my setup... Here is my XP Home config: client dev tun proto tcp remote pfsense.*.org 1194 (starred out by me) resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 When I launch the OpenVPN GUI, the Tunnel TAP network connection turns red, and I can right-click that to connect to the server. Everything seems to work fine until I browse for the actual network. The Tunnel TAP connection turns green and it says connected to 10.1.1.6 (I have tried different IP pools here too with no luck). I can see the internal network fine, but my home network behind pfSense is not there. I have tried browsing there by using Tools Map Network Drive, using the browser, with no success. When I open the command line on the client and use the ipconfig -all command, I get the following: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TAP-Win32 Adapter V9 Physical Address. . . . . . . . . : *** (starred out by me) Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.1.1.6 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 10.1.1.5 Lease Obtained. . . . . . . . . . : Monday, March 15, 2010 1:18:37 PM Lease Expires . . . . . . . . . . : Tuesday, March 15, 2011 1:18:37 PM I noticed that the default gateway is not present. Could this be my problem? I am still relatively new to firewalls, VPN, and network configuration so I'm sure I am messing up something simple. Oh yah, I should note that I have firewall rules configured for pfSense to allow traffic through the WAN and the LAN. At first there was just the WAN firewall rule, because that is what I got from the literature I was reading. I then created a LAN rule as well, but I'm not sure if this was correct. Neither way works, though. Screen shots below: Any help is much appreciated.

  Read the article

• vpnc Not Adding Internal DNS Servers to resolv.conf

  - by AJ

  I'm trying to setup vpnc on Ubuntu. When I run vpnc, my resolv.conf file does not get changed. It still only contains my ISP's name servers: #@VPNC_GENERATED@ -- this file is generated by vpnc # and will be overwritten by vpnc # as long as the above mark is intact nameserver 65.32.5.111 nameserver 65.32.5.112 Here is my /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.3 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 65.32.5.111 65.32.5.112 Any tips on how to troubleshoot/resolve this? Thanks in advance.

  Read the article

• How to create persistent static route on Mac OS X 10.6?

  - by kopobamypa

  I need to add static route on MAC OS. I found good description here Permanent Static Route Mac Os X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

  Read the article

• TMG Forefront Proxy blocking internal HTTP requests

  - by Pascal

  I have TMG Forefront with Proxy installed and configured. However, whenever I make internal HTTP requested to servers on the internal network with a fully qualified dns name, the proxy denies the connection. Denied Connection FRW-02 18/03/2011 20:06:37 Log type: Web Proxy (Forward) Status: 12202 Forefront TMG denied the specified Uniform Resource Locator (URL). Rule: Default rule Source: Internal (10.50.75.21:21492) Destination: Internal (10.50.75.10:8080) Request: GET http://app-01.mydomain.com.br:9871/internalwebserver_deploy/MyServiceService.svc?wsdl Filter information: Req ID: 0a157279; Compression: client=No, server=No, compress rate=0% decompress rate=0% Protocol: http User: anonymous How can I get around this block? This is an internal call, so it should block it. If I use only http://app-01:9871/internalwebserver_deploy/MyServiceService.svc?wsdl, without the domain after the server name, then it doesn't get blocked. 10.50.75.10 is the firewall's ip, and the internal network's gateway.

  Read the article

• XenServer 5.6.1-fp1. Can't get network working

  - by bakytn

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed)

  Read the article

• SOLVED: network issue ubuntu 8.04 in vmware esx

  - by hoberion

  ok, this is really pissing me off I have one ubuntu 8.04 instance running on vmware (esx) which decided after a reboot to stop resolving dns requests, I also cant connect to it using ssh although I can ping the server and its really that server (when I shutdown the server the ping also stops) stuff I tried: - reboot again :) - nslookup - serverip - setting networking to dhcp - offering some cute kittens to lucifer - removing the virtual nic and adding another (to get a different mac) - migrating the instance to another esx host - drinking 20 cups of espresso - stopped all services - running dnsmasq on another server and connecting to that dns - tcpdumping - disabling ip6 symptoms: cant resolve anything nslookup just says "no servers found..." although I can ping the servers traceroute to gateway doesnt work (even with traceroute -4 -n gatewayip) collegues laughing at me any thoughts solved it: a collegue told me to upgrade/reinstall the vmware tools, I did and it solved my issue after rebooting

  Read the article

• Routing all Traffic through OpenVPN Tunnel

  - by Filip Ekberg

  I have installed OpenVPN server on Archlinux and am now using OpenVPN GUI on Windows 7, I can talk to other computers connected through the VPN but I have not yet figured out how to route all traffic through the tunnel. How do I do this? I figured I need to do it with route ( cmd command ) but I think i need some pointers here. I've followed the OpenVPN HowTo on the matter but that doesn't work, it simply doesn't push the "force the client to go through this gateway"-option. And changing from OpenVPN to a PPTP / IPSec alternative is not an option at the moment.

  Read the article

• ReadyNAS Duo - FTP home network connectivity issue

  - by dwabyick

  I have a ReadyNas Duo that I recently purchased and configured on my local home network. I'm an AT&T DSL subscriber using their default 2701HG-B Gateway (2Wire) wireless router. Basically, I have managed to configure my ReadyNAS, and can access HTTP shares and WINS shares just fine, but cannot get access to it via FTP. I've enabled it in the 'Standard File Protocols' section in the UI, and made a share have read/write default access via FTP. My settings: Port: 21 Authentication mode: User Allow upload resumes: Yes Passive ports: 1024-65535 Masquerade as: (empty, but I've tried the internal IP address). I've even poked around at my router, which has a firewall, and even tried to poke a hole for the 'FTP Server'app for the ReadyNAS. Doesn't seem like I should need to do this, or should. Any ideas what else to check? Thanks! -Daniel

  Read the article

• SmartOS Virtualization with one public IP address

  - by matejkramny

  Is it possible? (title of this question) Googling Virtualization with one public IP address yields nothing useful What I have: SmartOS on a dedicated server. Dedicated server has one public IP address. What I want to do: Host multiple guest OS from that server Problem: Access to the guest through the (server that virtualizes the guest)'s IP address. Is this possible at all? Sorry, newbie to all this Research http://www.machine-unix.com/beginning-with-smartos/#comment-7256 Does not solve my problem - the guide sets up an internal IP http://blog.bgentil.fr/smartos-use-global-zone-as-gateway-for-guests.html Ideas Perhaps it is possible to do host-based translation like with nginx proxy?

  Read the article

• Adding Facebook IPv6 to Centos, getting CurlException 7

  - by Nick

  I'm correctly get following error. After searching about this issue, correct me if i'm wrong, I believe that adding/configuring IPv6 should solve the problem. PHP Fatal error: Uncaught CurlException: 7: Failed to connect to 2a03:2880:10:8f02:face:b00c:0:26: Network is unreachable\n thrown in /var/www/vhosts/facedex.net/httpdocs/fb/apps/seemyfuture/src/base_facebook.php on line 886 The problem is I dont know the right way to add it. There seems to have may methods. http://tldp.org/HOWTO/Linux+IPv6-HOWTO/x1035.html#AEN1044 http://unix.stackexchange.com/questions/34093/static-ipv4-ipv6-configuration-on-centos-6-2 My netstat show this. Shell doesnt recogize -rn6 though.It shows invalid option -- 6 netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 27.254.38.128 0.0.0.0 255.255.255.128 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 27.254.38.254 0.0.0.0 UG 0 0 0 eth0 FYI: I'm using Centos 5.7. Thank you a lot in advance.

  Read the article

• configuring two network interfaces in ubuntu 10.04.1

  - by Bill Smith

  I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

  Read the article

• Windows Media Center says "Searching for tuners" when I try to play live TV

  - by Louis

  After upgrading from Windows 8 Pro with Media Center to the 8.1 preview, I need some help in being able to watch live TV again. When I try to now, it says Please Wait. Searching for tuners. I tried reinstalling the software for the Hauppauge WinTV DCR-2650 TV tuner, and upgrading the firmware for both the tuner and the Cisco STA-1520 tuning adapter. I also tried swapping around the USB ports, cold-booting the devices, and running the Set Up TV Signal setting in WMC, but that says The TV signal cannot be configured because a TV tuner was not detected. Both devices look fine in Device Manager, reporting the "This device is working properly" status. I'm not sure if this is related, but I did have some network connectivity issues immediately after upgrading to Windows 8.1 where my either my subnet mask or default gateway was missing, and since the TV tuner shows up as a network device, I wonder if that might be related. However, I really don't know how those settings should look and Hyper-V sort of further complicates things with the virtual Ethernet adapters:

  Read the article

• windows 7 no internet access

  - by Kyle

  Just did a fresh install of Windows 7, and the network and sharing center says no internet access. Disabling and enabling the adapter seems to fix the issue temporarily, but the internet stops working shortly after. I have installed the latest NIC drivers and have installed all Windows updates. I have also tried manually setting the ip/gateway/dns and running netsh int ip reset in an elevated command prompt. I am running Windows 7 Home Premium 64bit with a wired connection. I have searched for hours, but have found no working solutions. Does anyone have any ideas?

  Read the article

• SSH: Tunnel multiple ports to remote server

  - by user1594322

  See attached diagram. Host A - Windows server Host B - Linux server Host C - VMWare ESXi server From host A I can SSH to host B over the VPN tunnel. I can ping host C from host B, but not from host A. I am assuming this is because host C has lost its default gateway. Host C is a VMWware ESXi server, so I would need to tunnel several ports (80,443,902) in order to reach host C from host A. What is the correct ssh syntax to create the tunnel in order to reach host C from host A, and can I do it using a single command, or do I need to run three commands (one for each port, 80,443,902)?

  Read the article

• ifcfg-eth* on CentOS 6.x, but for IPv6 only?

  - by Ray Hoffman

  Could someone kindly provide a skeleton ifcfg-eth0:[X] for creating an alias with a IPv6 address and no IPv4 address? Or, alternatively, what's the IPv6 equivalent of this: in /etc/sysconfig/network-scripts/ifcfg-eth0:1 DEVICE=eth0:1 ONBOOT=yes BOOTPROTO=static IPADDR=42.69.66.66 NETMASK=255.255.255.0 Or does this not even make sense in IPv6 space? I know that I can use, for example: IPV6INIT=yes IPV6ADDR=2600:4200::6900:6666:dead:beef But then do I need to specify that there is no IPv4 address associated with this alias? If so, how? And do I need to also specify the IPV6_DEFAULTGW? Or can it piggyback on the eth0 (unaliased) gateway, which is specifed, like with IPv4 aliases? EDIT: Answered my own question! The easiest way to accomplish this seems to be not to create an alias as with IPV4, but to specify, for example, IPV6ADDR_SECONDARIES=2600:4200::6900:6666:dead:beef on the script for the base interface, e.g. ifcfg-eth0.

  Read the article

• PHP stop working after a server reboot

  - by Ido Bukin

  I reboot my server and suddenly the PHP-FastCGI stop working . I try to do - /etc/init.d/php-fastcgi restart Also i try to restart my Nginx : /etc/init.d/php-fastcgi restart How can i turn on my PHP again ?? My server run - Ubuntu 11.10 Nginx 1.2.3 MySQL PHP-FastCGI Also i want to ask it is possible that i have 2 Nginx installs on my server and they run in the same time ? when i check the Nginx version in the console its says that the version is 1.2.3 And when i go to my site i see - 502 Bad Gateway nginx/1.0.5 How can i fix this ?

  Read the article

• Dynamic DNS registration for VPN clients

  - by Eric Falsken

  I've got a VPN server set up in my Active Directory on a remote network. (VPN Server is separate box from DNS/AD) When I dial into the network (client machine is not a member of the AD) the machine does not register its IP or Hostname in the DNS. I've played with all possible combinations of DHCP and RRAS-allocated IP pools, and none of them seem to cause my client to register. Is it because my client has to be a member of the domain? Are there some security settins I can tweak so that it can register its hostname/ip? I've looked in the event logs (System and Security) for the AD, DNS, DHCP, RRAS, and the client machine, and don't see anything relating to DNS Registration. Here's the IPConfig on the client machine (once connected): PPP adapter My VPN Name: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : My VPN Name Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.22(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.52 <- DC1 192.168.1.53 <- DC2 NetBIOS over Tcpip. . . . . . . . : Enabled Edit: It looks like my clients are not recieving the DHCP Scoope Options. I found this great article in Microsoft's KB. So the problem here is that the VPN Server "pre-reserves" the DHCP addresses, but then you have to add the DHCP Relay Agent to relay the secondary request for scope options. My problem is that the DHCP Relay Agent isn't relaying to the local DHCP server (same box as the VPN/RRAS). I've configured the DHCP Relay Agent according to this KB, but it dosn't work for a local DHCP server. (I see the request count increasing, but no responses) I was able to get everything working by specifying the DNS server and domain name in the VPN connection properties on the client. But am still unable to assign it (or the default gateway) dynamically via DHCP. The client also has to be a member of the remote domain.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >