Search Results

Search found 6254 results on 251 pages for 'ready'.

Page 72/251 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Ubuntu not connecting to network in Hyper-V

  - by soandos

  I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

  Read the article

• Used HDD/ran DiskSmartView/40,000 Power-on-hours?? should i trust it w/ my data, or take it back and bitch?

  - by David Lindsay

  I just bought a used hard drive from a University Surplus Store. Decided to run DiskSmartView to make sure it wasn't ready to fail. 40,000 power-on-hours I don't know if I feel like trusting my data to something that used. I really dont know if thats unreasonably old, but when i compare it to the POH reading i get when testing my other hdds its more than 3x older (my others have 2110 hours, 6150 hours, etc.. It's a Western Digital, so that gives me a little bit of hope(WDC WD4000KD-00NAB0). I could sure use someone else's opinion here. Thanks, DAVE

  Read the article

• How to stop OpenGL from applying blending to certain content? (cocos2d/iPhone/OpenGL)

  - by RexOnRoids

  Supporting Info: I use cocos2d to draw a sprite (graph background) on the screen (z:-1). I then use cocos2d to draw lines/points (z:0) on top of the background -- and make some calls to OpenGL blending functions before the drawing to SMOOTH out the lines. Problem: The problem is that: aside from producing smooth lines/points, calling these OpenGL blending functions seems to degrade the underlying sprite (graph background). So there is a tradeoff: I can either have (Case 1) a nice background and choppy lines/points, or I can have (Case 2) nice smooth lines/points and a degraded background. But obviously I need both. The Code: I have included code of the draw() method of the CCLayer for both cases explained above. As you can see, the code producing the difference between Case 1 and Case 2 seems to be 1 or 2 lines involving OpenGL Blending. Case 1 -- MainScene.h (CCLayer): -(void)draw{ int lastPointX = 0; int lastPointY = 0; GLfloat colorMAX = 255.0f; GLfloat valR; GLfloat valG; GLfloat valB; if([self.myGraphManager ready]){ valR = (255.0f/colorMAX)*1.0f; valG = (255.0f/colorMAX)*1.0f; valB = (255.0f/colorMAX)*1.0f; NSEnumerator *enumerator = [[self.myGraphManager.currentCanvas graphPoints] objectEnumerator]; GraphPoint* object; while ((object = [enumerator nextObject])) { if(object.filled){ /*Commenting out the following two lines induces a problem of making it impossible to have smooth lines/points, but has merit in that it does not degrade the background sprite.*/ //glEnable (GL_BLEND); //glBlendFunc (GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glHint (GL_LINE_SMOOTH_HINT, GL_DONT_CARE); glEnable (GL_LINE_SMOOTH); glLineWidth(1.5f); glColor4f(valR, valG, valB, 1.0); ccDrawLine(ccp(lastPointX, lastPointY), ccp(object.position.x, object.position.y)); lastPointX = object.position.x; lastPointY = object.position.y; glPointSize(3.0f); glEnable(GL_POINT_SMOOTH); glHint(GL_POINT_SMOOTH_HINT, GL_NICEST); ccDrawPoint(ccp(lastPointX, lastPointY)); } } } } Case 2 -- MainScene.h (CCLayer): -(void)draw{ int lastPointX = 0; int lastPointY = 0; GLfloat colorMAX = 255.0f; GLfloat valR; GLfloat valG; GLfloat valB; if([self.myGraphManager ready]){ valR = (255.0f/colorMAX)*1.0f; valG = (255.0f/colorMAX)*1.0f; valB = (255.0f/colorMAX)*1.0f; NSEnumerator *enumerator = [[self.myGraphManager.currentCanvas graphPoints] objectEnumerator]; GraphPoint* object; while ((object = [enumerator nextObject])) { if(object.filled){ /*Enabling the following two lines gives nice smooth lines/points, but has a problem in that it degrades the background sprite.*/ glEnable (GL_BLEND); glBlendFunc (GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glHint (GL_LINE_SMOOTH_HINT, GL_DONT_CARE); glEnable (GL_LINE_SMOOTH); glLineWidth(1.5f); glColor4f(valR, valG, valB, 1.0); ccDrawLine(ccp(lastPointX, lastPointY), ccp(object.position.x, object.position.y)); lastPointX = object.position.x; lastPointY = object.position.y; glPointSize(3.0f); glEnable(GL_POINT_SMOOTH); glHint(GL_POINT_SMOOTH_HINT, GL_NICEST); ccDrawPoint(ccp(lastPointX, lastPointY)); } } } }

  Read the article

• INtegral card readers have drivers installed but do not show on my computer

  - by Santiago Berniz

  I recenlty fixed a computer powerbutton and accidentally unplugged a sd card reader and did not know where was at (didnt knw if it was usb or firewire/ after i found out, i guess i installed it on a different usb so reinstalled the drivers..Drivers show installed successfully, ready to use. but THey do not show up on my computer as removable disks (E:) etc.a s they should I have windows 7 home premium 64 bits. the computer is a Acer Aspire M1201-be50001a. I tried following the installation and they show up while installing and then hide again. Any help is appreciated Thanks in advance.

  Read the article

• What's the strategy to implement a "knowledge base" in my company.

  - by Oscar Reyes

  In my current work we think we can get benefit from having a knowledge base, so the next time someone has a question/problem etc, that base can be consulted and an answer will show up. Also, it will reduce the risk from having people leaving the company with the knowledge and we would have to start all over again. My question is, what strategy can we follow to implement/buy/get/build/etc this knowledge base? Are there software ready for this? Would it be better to have something build by ourselves ( we have some programmers ) This is an small company ( < 30 ) and the base should be accessible from outside the office ( when the employees are with the customer etc.) so I guess a webapp is in order.

  Read the article

• Looking for zsh completion file for osX native commands

  - by Chiggsy

  I've been digging deep into what actually comes with osX in /usr/bin and especially /usr/libexec. Quite good stuff really, although the command syntax is a bit.. odd. Let me direct the curious to the command that made me think of this: networksetup -printcommands I can not think of a command that better illustrates the need for good completion. security -h perhaps, but those commands have a familiar easy-to-read format. I beseech the community, please point me to a place where I can find such a thing. I never type them right, and I ache for tab completion for this Anyone have any idea where I could grab something? I'd prefer to stand on the shoulders of giants instead of trying to make a zsh/bash completion script leap into the world, ready for battle, like Athena, from my forehead. I am no Zeus when it comes to compctl. Not at all.

  Read the article

• Good Books About Scaling Up Databases/Servers/etc.?

  - by Mehrdad

  I've applied for an internship at a startup company that expects its user base to grow by a large factor in a small amount of time, and so part of their project is to scale everything up so that they're ready: handling more/larger requests efficiently, handling server failures, load balancing, getting more JavaScript to run faster on the client computers, etc. Part of my job will also be figuring out what to do, so it's not obvious what my exact task will be at the moment. I was told that I should start reading up a little more about this so that I would have a little bit of an idea of what to do. What are some good books for me to read on this topic? I have a little bit of experience with the usage of MySQL (and also a little experience with web development), but in no way do I claim any knowledge on the internal workings of databases or distributed systems, so I might need readings more on the introductory side.

  Read the article

• Get hard drive to spin up upon mouse movement

  - by John

  My storage drive which does not contain the OS stops spinning after a few minutes. This is annoying and totally defeats the purpose of having a fast access drive. The drive will NOT spin up when I use the mouse! It only spins up when accessed. However, I don't want it to spin all the time. I would like it to spin up anytime there is mouse activity so it is at the ready when I am using the computer, but go to sleep during inactivity. Can anyone think of a trick to get a secondary drive to spin up on a mouse movement?

  Read the article

• unable to connect gmail and hotmail via telnet

  - by codeomnitrix

  Hey all i am try to connect to gmail and hotmail server via telnet. As: $: telnet smtp.gmail.com 25 Trying 74.125.127.109... Connected to gmail-smtp-msa.l.google.com. Escape character is '^]'. 220 mx.google.com ESMTP j3sm3044317ybe.11 helo 250 mx.google.com at your service 220 2.0.0 Ready to start TLS mail from: [email protected] Connection closed by foreign host. Here codeomnitrix is a user of smtp.localhost.com. And i am running postfix at my system with sitename being smtp.localhost.com. And i am able to sent mail locally from one user to another user but can't send to any other user who is not local. Thanks in advance:)

  Read the article

• program for drawing diagrams

  - by ldigas

  I need to draw a few diagrams that describe the working of some smaller programs (nothing real, but some exercise to illustrate some points). They're supposed to be 'old kind' diagrams, like you remember from the "old school of programming" - I gather some users here will know what I mean. And it's be good if they have ready blocks for program units, IF conditions, FOR/DO loops and such ... So, anyone knows of an application for such ? (I've tried Visio which I have on my work machine (for whatever reason ... I sure didn't put it there) ... but it is "too visual" for this kinda thing ... I just want to draw a few simple black on white diagrams ... nothing special or in colours).

  Read the article

• Is it possible to skip .rvmrc confirmation?

  - by Viacheslav Molokov

  We are using RVM for managing Ruby installations and environments. Usually we are using this .rvmrc script: #!/bin/bash if [ ! -e '.version' ]; then VERSION=`pwd | sed 's/[a-z/-]//g'` echo $VERSION > .version rvm gemset create $VERSION fi VERSION=`cat .version` rvm use 1.9.2@$VERSION This script forces RVM to create new gem environment for each our project/version. But each time we was deploying new version RVM asks us to confirm new .rvmrc file. When we cd to this directory first time, we are getting something like: =============================================================== = NOTICE: = =============================================================== = RVM has encountered a not yet trusted .rvmrc file in the = = current working directory which may contain nasty code. = = = = Examine the contents of this file to be sure the contents = = are good before trusting it! = = = = Press 'q' to exit the reader when finished reading the file = =============================================================== (press enter to continue when ready) This is not as bad for development environments, but with auto deploy it require to manually confirm each new version on each server. Is it possible to skip this confirmation?

  Read the article

• How do I format an SSD to be used as the hibernation drive? (Acer S3)

  - by Craig Caro

  I have an Acer Aspire S3 ultrabook. It comes with two separate drives, one 320 gb hdd and a 20 gb ssd, which Windows uses for hibernation. I formatted the SSD and installed Ubuntu on it. How do I format the SSD so that Windows recognizes the SSD as the hibernation drive, like the way it came out of the box? Acer really had an interesting way of using the SSD. I'm just trying to get the laptop ready to sell, so I figured I would get it back to normal.

  Read the article

• IIS 6 SSL Restore from PFX without Deleting Pending Request

  - by Sev

  I requested a new SSL certificate from a certificate authority, but until they process it my site is losing business. Before doing so, I had backed up the original certificate to a PFX file. Now when I try to restore the backup, it forces me to delete it, or process the request. Since the new one isn't ready yet, is there any way to restore the backup, without deleting the request? Or will it cause any issues if I delete the request to install the new one when it comes in? Server is IIS 6

  Read the article

• Huawei b260a gsm modem not forwarding gre for pptp tunnel

  - by Priit

  I have a huawei gsm modem that does not want to let gre through. The goal is to connect into a pptp server thats behind the huawei. In the modems port forwarding settings theres a ready made profile for pptp (1723). After activating that the MS pptp test tools show that connection is being initiated but no gre packets make it to the server. After taking a closer look into the modems iptables rules theres nothing in there about gre. So I tried making gre rules manualy into forward and preroute chains without any success what so ever. As far as I can tell theres no ip_gre module present on the device is that needed for gre forwarding? Thats what I'm afraid of that it doesn't support gre in NAT but how would I turn it into a bridge? The wan interface is ppp0 so bridging it with eth0 would not work right? Is there some iptables rule I could use to make the modem let all the traffic just straight through?

  Read the article

• iPad: Mobile Safari, HTML5 <video>, and jquery transitions

  - by justinbach

  I'm building a simple proof-of-concept for an iPad-specific website that would use video transitions to bring users from section to section. For purposes of the proof of concept, each "section" is just an image with a semitransparent content text box positioned above it. There are just 2 sections, "home" and "contact", and they've got a transition video sandwiched between them via z-indexing. The idea for the proof of concept is that clicking on the "home" section causes it to disappear, followed by playback of the transition video, which (upon completion) disappears to reveal the "contact" section. Everything is working fine with this version of the demo on the iPad and on Safari for Windows and OS X. Here's the JS: var myVideo = document.getElementsByTagName('video')[0]; $('document').ready(function() { $('#home').click(function() { $(this).css('display','none'); myVideo.play(); myVideo.addEventListener('ended', function() { $('#transition').css('display','none'); }); }); }); What I'd like to do is use a jQuery fadeOut() effect to fade out the text box prior to starting the video when the "home" section is clicked. The code seems simple enough: $('document').ready(function() { $('#home').click(function() { $('#home-copy').fadeOut('slow', function() { $('#home').css('display','none'); myVideo.play(); myVideo.addEventListener('ended', function() { $('#transition').css('display','none'); $('#home-copy').fadeIn('slow'); }); }); }); }); and it's working exactly as desired on desktop versions of Safari. On the iPad, however, the text box fades out as expected and the home section disappears as well, but the video stubbornly refuses to start playing. I really don't know why this would be the case, but that's what's happening. I'd appreciate any advice you might have! Incidentally, here's the markup: <div id="main-container"> <div id="home-copy"> <h1>Lorem Ipsum Dolor Sit Amet</h1> <p>Donec blandit pharetra luctus. Nam at porttitor odio. Nullam sem orci, venenatis sed pharetra eget, commodo rhoncus quam. Ut euismod vehicula bibendum. Curabitur in magna ante, id fringilla lacus. Nullam id elit eget lacus feugiat porta. Nulla vitae orci vehicula risus sagittis egestas quis sed justo.</p> </div> <div id="home"> <img src="images/home.jpg" width="1152" height="720" /> </div> <video id="transition" src="video/home_to_contact_lo_res.mp4" preload width="1152" height="720"></video> <div id="contact"> <img src="images/contact.jpg" width="1152" height="720" /> </div> </div>

  Read the article

• Mac OSX Server - Mac Mini to XServe Migration

  - by notpeter

  If I build out a Mac OSX Server install on a Mac Mini and then when it's ready for production I image the disks to an XServe, is there any reason the resulting system won't just work? Assuming I'm able to keep the same IP address are there any other issues I should be aware of? I'll be running minimal services, just AFP, SMB and Open Directory. TMI: My Intel XServe is full of cruft. Was originally a G4 XServe running 10.3, upgraded to 10.4 then migrated to 10.5 on the Intel XServe. I'd like a clean start, but can't spare the XServe downtime while I build out the install, can I just use a Mac Mini for dev and then switch to the XServe for production.

  Read the article

• What's the strategy to implement a "knowledge base" in my company. [closed]

  - by Oscar Reyes

  In my current work we think we can get benefit from having a knowledge base, so the next time someone has a question/problem etc, that base can be consulted and an answer will show up. Also, it will reduce the risk from having people leaving the company with the knowledge and we would have to start all over again. My question is, what strategy can we follow to implement/buy/get/build/etc this knowledge base? Are there software ready for this? Would it be better to have something build by ourselves ( we have some programmers ) This is an small company ( < 30 ) and the base should be accessible from outside the office ( when the employees are with the customer etc.) so I guess a webapp is in order.

  Read the article

• Epson XP-600 will not print properly with all new ink recently installed

  - by Joy

  I just installed brand new Epson 273 ink cartridges ($64 worth!) in my Epson XP-600 printer. One box had all the colors plus black, and one had the fatter black cartridge. I am not getting ANY black print on paper, although, when I lift the cartridges out, they show ink inside. Now the yellow is saying LOW though all cartridges are less than 2 weeks old. I only use this printer sparingly—not for business or work reasons. I am ready to scream, as the ink cost almost as much as the actual printer (which is barely 7 months old)! Any ideas on how to solve this issue?

  Read the article

• Debian modem problem

  - by Raafat

  I'm a new Debian user, it looks like a very good choice 4 me, every thing is stable, free and easy to use. The problem is, I'm using my modem to establish a dial up connection to the internet (ppp) (a very old stupid way I'm forced to use for now), and using the KPPP application to do that, and nothing is working properly for me. it seems like it didn't recognize my modem or something. I already tried to make a few stuff, and now i know my modem is on /dev/tty0, so i made a link for that on /dev/modem, and query the modem using KPPP and it responded with something like: Ati : Ati0: Ati1: ... ... Ati7: with a textBox to fill up in front of each one of thees Atis, and now, when i press connect on kppp, it says modem ready, and that's it. BTW, my modem is MDC AC'97

  Read the article

• Advice wanted on advanced Linux certification/courses including RHCA

  - by nitins

  I have been working in Linux administration for 2.5 years. I would like to have a certification in this. Yes RHCE is an option. I think I already know most of the RHCE stuff. But I would like to have something advanced. I am ready for a full time course as I am not getting the exposure in my current company. Please give me suggestions about training/courses. I have found a course called RHCA(Architect). Is this a good course?

  Read the article

• Rails deployment questions

  - by Meltemi

  Getting ready to deploy a rails project on Mac OS X Server (10.5 - Leopard). Got a few questions for someone with Rails experience: where should directory containing the project go? inside the website's root folder or out? who should "own" that directory? www? root? something/someone else? hope to continue serving static pages via Apache... would like rails app to be served by mydomain/xxx/railsapp. is there a standard name people us for 'xxx'? not expecting too much traffic to begin with...just like to keep things as simple as possible.

  Read the article

• Linux certification

  - by nitins

  I have been working in Linux administration for 2.5 years. I would like to have a certification in this. Yes RHCE is an option. I think already know most of the RHCE stuff. But I would like to have some thing advanced. I ready to for a full time course as I not getting the exposure in my current company. Please give me suggestions about training/courses ? I find a couse RHCA(Architect). Need to know if this is good ?

  Read the article

• Best Practices: How can admin deploy software to 100s of PC ?

  - by Gopal

  Hi ... The Environment: I am working for a college. We have a couple of labs (about 100 PCs) for students. At the end of the semester, the PCs will be full of viruses, corrupt system files, all sorts of illegal downloads etc. (everything you can expect from a student environment). At the end of the semester, we would like to wipe out all the systems and do a clean install (WindowsXP + a set of application suites) to get ready for the next batch of students. Question: Is there any free software that will enable an admin to deploy a clean disk image to all the PCs in one go?

  Read the article

• Setting up nginx on Ubuntu?

  - by Industrial

  Hi everyone, I've just setup a VPS running Ubuntu server 10.10 as a test environment to run with nginx. This far i've ran apt-get install nginx php5 php5-cgi and accessed the IP of the VPS with a browser which outputs It works, so it should be ready to run. Never having worked with nginx in the past, I have no idea on what to do next. How should I config my nginx install to run properly as a staging server in my LAN? Apparently, there's multiple configs for nginx including sites-default and nginx-default making me really confused.

  Read the article

• Ubuntu 10.04 install - frozen at splash, no errors

  - by Andrew Bolster

  Has anyone else come across this? After about as much of a fresh install as i can muster without buying new drives, and after walking through the amd64 alternate install with ease, and after a little 'pre-splash' screen where the orange dots under the (very sexy) new ubuntu logo blink away, I'm left with a vista of purple hues and logo plonked in the middle, with the dots not going anywhere. I was at this same position last night at 3 in the morning, left it lying overnight, and nothing had changed, so I'm pretty sure its frozen, the virtual terminals are not accessible, ie, c+a+F1 etc does nothing, but when i go in and inspect /var/log/* in the recovery console by booting off the installation cd, no errors, no complaints, no problems. I'm at my wits end and am just about ready to try anything. If this was on SO I'd be bountying, but if anyone can help you'll just have to cope with my thanks! Additional Details on my blog and my first attempt at asking for help Update: I can reasonably say it is not a hardware fault, as a full install of 9.10 with dual screen nvidia xinemara indicate that nothing is wonky

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >