Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 72/128 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

• How to revert to "last known good configuration"

  - by Ripley

  Hi Guys. I failed to install ubuntu 10.04 with WUBI, for some reason it's showing me the root partion is not defined. I'm bored to fight with it so I just removed ubuntu in windows. However this installation made my original Windows XP cripple, a normal boot will end up with a blue screen, error code 7E, I'm still able to boot with the 'last known good configuration' tho. My understanding is booting like this will recover things and I'm supposed to be good when reboot, while this is not the case for me, I have to choose the 'boot from last known good configuration' each and every time to work around the blue screen. Could you suggest how could I resolve this? I feel it's foolish having to waste 10 more seconds each time starting the OS.

  Read the article

• recovering a broken GNOME-desktop in debian wheezy

  - by morgon

  an hour ago I had a working gnome-desktop on my debian system (thinkpad x121e). Then I installed compiz that crashed. After a reboot the gnome-desktop no longer started. Then I did some upgrades with aptitude, all gnome-packages seem to be there, but it is still not working. On startup I get a login-dialog, when I login there is no desktop, only some window-manager running that allows me to start a terminal. When I run "gnome-session" I get the error message "failed to load session "gnome". So how do I get back to a working desktop? I have tried "tasksel install gnome-desktop --new-install" but that just displays a progress window that after half an hour still shows 0%. Can someone help me please? I have tried "

  Read the article

• Can't boot into Linux partition after installation

  - by Otto

  I just installed Ubuntu. I created a partition in MacOSx using Disk utility, then deleted the partition and installed Ubuntu on the free space created. After the installation, Ubuntu said it would reboot. I hang on shutdown (which is normal, as google told me), so I used the power button to turn the MacBook off. Now I want to boot into Ubuntu. Pressing option/alt on startup only shows me the MacOSx and Windows partition. Also, the Linux partition isn't showing up on my MacOSx desktop. And in Disk Utility, I can see 3 grayed out partitions: "disk0s4", "disk0s5" and "Linux Swap". What can I do to boot into Ubuntu without losing my other partitions? Thank you for your help.

  Read the article

• Windows 7 freezing unexpectedly

  - by Thomas Deutsch

  I have a Windows 7 computer here, which is freezing between 2 times a day and 1 time every second day. I see no problem, no special drivers, no special Apps are open, no encryption or something like that. Apps usually open then are Firefox, Thunderbird, Eclipse and maybe Office. Computer is just freezing. No Reboot, no shutdown, no bluescreen and no error. User has to hardreset it. Eventlog shows me an kernel error saying it has been unexpected rebooted due to an fatal error, but no statement about what kind of error happended. Anyone an idea what it can be? Chkdisk should be ok (currently, I run it a second time).

  Read the article

• Fedora Core 11 won't boot without a monitor

  - by feihtthief

  I have a P4 system that I installed Fedora 11 on. It will not boot without a monitor attached. The monitor can be off (not even have power plugged in), but must be attached. Without a monitor the hard disk thrashes around a bit like it's starting up services, but does not get to the point where I can ssh into the box. I have set the default runlevel to 3 and removed the rhgb entry from grub. Any suggestions welcome. Edit: I have already set the run-level to 3. The machine boots up fine with the monitor plugged in to the point where I can SSH into it. as soon as i unplug the monitor and reboot, it will not boot to that point.

  Read the article

• Enter / Return key stops working

  - by andygrunt

  I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to?

  Read the article

• Remote Desktop fails with no error

  - by Duane

  Recently, I've been having problems connecting to a remote machine via RDP. I can connect fine exactly once, but all subsequent attempts fail until the remote machine is rebooted. I seem to authenticate properly, but the RDP logon dialog disappears after showing, "Configuring remote session..." for a few seconds. No errors or other useful info is written either to my screen or the Event Logs of the two machines involved. I've tried disabling remote sound as others have suggested, with no success. I'm still investigating a solution, but would appreciate any thoughts. Fortunately, I can reboot the box remotely w/o causing any problems, but this is a less than ideal workaround.

  Read the article

• MySQL Server Not Starting on Boot

  - by Brian

  I have installed MySQL on a RHEL 5 server and I'm wanting to set it up so that the server starts on boot. I've ran the "chkconfig --list mysqld" command and it's currently running on levels 3, 4 and 5. However, when I reboot the server, no mysqld process is started. I've also tried manually starting the server by executing "/usr/bin/mysqld_safe" and I get the following output: Starting mysqld daemon with databases from /var/lib/mysql STOPPING server from pid file /var/run/mysqld/mysqld.pid 100319 10:31:30 mysqld ended I looked in /var/log/mysqld.log and I found the following: 100319 10:29:01 mysqld started 100319 10:29:02 InnoDB: Started; log sequence number 0 29752204 100319 10:29:02 [ERROR] Can't start server : Bind on unix socket: Permission denied 100319 10:29:02 [ERROR] Do you already have another mysqld server running on socket: /var/lib/mysql/mysql.sock ? 100319 10:29:02 [ERROR] Aborting

  Read the article

• Problem booting hard drive after installing Centos from USB Stick

  - by Rick

  Here is the situation, I created a Centos Live 5.4 Bootable USB drive. I used this to install Centos on a HP Netbook. BTW: the Netbook doesn't have a CDRom so I used the usb key. When the system goes to write the Grub boot loader to disk, it wants to write the boot loader to the usb drive (/dev/sda), not the hard disk (/dev/hda). I do have the option of writing the boot loader to /dev/hda, (not to the mbr!) but when I reboot I get an load error and the Grub prompt. How can I get Centos booting from the hard disk instead of using the USB key. Thanks.

  Read the article

• Active Directory replication failing with Access is Denied

  - by Justin Love

  I recently discovered that Active Directory replication started failing about a month ago. If I attempt to Replicate Now from the failing domain controller, I receive The following error occurred during the attempt to synchronize the domain controllers: Access is denied. It is between two servers at a remote site. One is Windows 2003 and the other is Windows 2000; the Windows 2000 machines is experiencing the errors. The domain is older OUR_DOMAIN style. Attempts so far: I disabled Kerberos service on the Windows 2000 server and restarted RPC and RPC locater services have expected settings HKEY_Local_Machine\Software\Microsoft\Rpc\ClientProtocols missing ncacn_nb_tcp on Windows 20003 server (added) Portqry reports okay Firewall disabled netdom resetpwd (and reboot) on Windows 2000 server.

  Read the article

• Unable to install Kaspersky anti virus 2011 on XP

  - by Guruprasad

  I recently tried installing Kaspersky antivirus 2011 on my XP (service pack 2) . Everytime I try to install through setup file, it initiates and then I get a pop up message saying Windows XP not compatible ( Sorry could no get the complete error message ) there is also options which come up saying "continue anyway" but it wont allow to click as the system gets hung . I also tried to skip from incompatible software by following the instructions on Kaspersky's website by creating a short cut to setup file and modifying the target field in it but still I get the same message. It also asks me to reboot before I install but it is still the same . Does this mean that I wont be able to install this antivirus software on my machine ? I also wrote to the Kaspersky support but seems they will take ages to reply.

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• http server connectivity puzzle

  - by jpmartins

  I have been seeing some strange connection issue in the production environment. The setup has two IBM Http Server's (IHS) and a network IP load-balancer in front of them (round-robin). One instance the system is working fine, the next requests stop arriving at the IHS. Telnet directly to port 80 of the IHS is established sucessfully, but connection to the port 80 through the IP of the load-balancer fails! The puzzle comes next, the network admins say the load-balancer is working fine. When we finally reboot the IHS servers and request start flowing... The situation happened three times the last month and no obvious pattern was found. Any debug ideas?

  Read the article

• Need to use wusa to stop endless rebooting on R2

  - by Jack

  I installed 3 updates, which after rebooting resulted in a reboot loop, never going past the "configuring your computer for windows" stage. Last known good configuration, safe mode etc make no difference (as expected). I have no system restore images available. I used dism to uninstall one of the updates, but the other two appear to be MSP patches, and so I cannot use dism to uninstall them. From what I have been reading it appears I must use wusa, however wusa does not seem to be included in WinRE. Does anyone have a suggestion of how I can access wusa to uninstall these updates, and hopefully reverse this problem?

  Read the article

• Less reboots on Windows Server Core, is this true or just a myth?

  - by Peter Hahndorf

  Because there are less components installed on a Windows Server core OS, it needs less patches than the full OS. I read in several places that therefor it needs less reboots after patching. I'm running Server 2012 core in production since September 2012 now and I don't remember a single patch-Tuesday when I did not have to reboot the server after installing Windows updates. Are there any hard numbers out there that compare the required reboots for core vs. Full OS? Less reboots may be the main reason why people choose to go with Server core. If it actually requires just as many reboots as the full OS install, they may think again the next time they set up a server.

  Read the article

• Server 2003 answers ping, but wont serve http, ftp,smtp or pop3

  - by Manfred

  After reboot, my server wont respond to any incoming request until it is rebooted again. Then, about 5-6 hrs later, any website on it will return a ping, but it will not serve the page, nor will it serve ftp, pop3 or smtp requests. The System log shows W3SVC errors 1014 and 1074, which relate to an Application pool not replying; I have one phpAdmin app pool which I have stopped - it is showing a solitary website as the default App, but the server no longer serves php extensions, and I can't transfer the default website to another pool to kill the whole app pool. I would appreciate your help.

  Read the article

• Can KVM roll back changes to Virtual Disks automatically?

  - by Cygon

  I'm currently using VirtualBox on my Linux server to run a small Windows guest OS. I've configured its main virtual hard drive as what VBox calls "Immutable" - meaning that any changes to it are written into a differencing image that is discarded when the system reboots. Can KVM do something similar? I've read about snapshots via "savevm", "loadvm" but I believe that's saved states, not differencing images. What I ultimately want is a VM with two drives: one reverts on each reboot, one keeps its changes. Ideally, the unchangeable drive image should be stored with only read access granted to the user running KVM.

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state [closed]

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results.

  Read the article

• Windows 7 sata disk not recognized after wake up from sleep state

  - by Gabber

  My windows 7 x64 PC/server worked fine until I installed a brand new seagate SATA hard disk (2 TB). My first disk was a IDE Maxtor (250 GB). I tried to use it as a secondary drive leaving the maxtor as primary and, when I put the computer in sleep state, on wake-up the SATA disk is not recognized anymore until next reboot. Now I'm trying to set it as primary disk (I copied the old HD contents with HD clone), when the computer goes in sleep state, on wake up it doesn't see the disc thus causing my system to crash. I tried the following: BIOS update (Asus M2V motherboard) but the situation worsened as the system didn't wake up from the sleep (with both my HD's) Reinstalling the drivers Bios changes Microsoft Hotfix KB977178 that seemed to address exactly my problem but gave me "The update is not applicable to your computer" message. Disabling hybrid sleep but no results. I also tried all the suggestions from this question Why doesn't Windows 7 wake up from sleep?. Still no results.

  Read the article

• cpu usage nearly 100 constantly windows xp sp3

  - by user33882

  When running some heavy applications like games or virtual box for some time.. the cpu usage is normal for some 15 mins and then suddently cpu usage increases. even after i quit the heavy apps and when i start some other apps, the cpu usage of the new opened application is also very high.. this continues until i reboot the system. There is single particular process occupy more cpu. All the processes cpu usage is little high than normal.. Any solutions?

  Read the article

• HDFS datanode startup fails when disks are full

  - by mbac

  Our HDFS cluster is only 90% full but some datanodes have some disks that are 100% full. That means when we mass reboot the entire cluster some datanodes completely fail to start with a message like this: 2013-10-26 03:58:27,295 ERROR org.apache.hadoop.hdfs.server.datanode.DataNode: java.io.IOException: Mkdirs failed to create /mnt/local/sda1/hadoop/dfsdata/blocksBeingWritten Only three have to fail this way before we start experiencing real data loss. Currently we workaround it by decreasing the amount of space reserved for the root user but we'll eventually run out. We also run the re-balancer pretty much constantly, but some disks stay stuck at 100% anyway. Changing the dfs.datanode.failed.volumes.tolerated setting is not the solution as the volume has not failed. Any ideas?

  Read the article

• How can I make a VB script execute every time Windows starts up?

  - by jon

  My goal is to copy INI.file each time Windows XP is started up or rebooted. The following VB script copies INI.file from a local directory to C:\INI_DIR. I tried to copy the VB script to C:\WINDOWS\system32\config\systemprofile\Start Menu\Programs\Startup, but it doesn't get activated. Is it not the right path? How can I make it execute on startup/reboot? The script: Dim currDir Const OverwriteExisting = True Set fso = CreateObject("Scripting.FileSystemObject") currDir = fso.GetParentFolderName(Wscript.ScriptFullName) Set objFSO = CreateObject("Scripting.FileSystemObject") objFSO.CopyFile currDir & "\INI.file" , "C:\INI_DIR" , OverwriteExisting ' Release the objFSO objects Set objFSO = Nothing ' Release the fso objects Set fso = Nothing

  Read the article

• UBUNTU.. GRUB problem

  - by pravinp

  Hi, I have/(had) windows xp on one partition of my hdd. on second i installed ubuntu 9.10 yesterday. and after reboot of windows xp i get error "GRUB LOADING.". now i know that you can play around with that using live GRUB and all. putting GRUB on top of MBR or etc etc. something like that. i want to know - if i reinstall Ubuntu 10.04 which is available now - will it give me still the same error? or i will be able to use both OS? (i.e. is that problem solved in version 10.04 or still there? and if it is solved reinstallation of ubuntu will solve the problem or not?) anyhelp is welcome. Thanks

  Read the article

• modprobe ndiswrapper - not found

  - by David

  I'm trying to use ndiswrapper on a Slackware 12 (I think) box, but I'm running into a problem with modprobe. Everything I find online says that it should be working, but for some unknown reason it isn't. Here's what I've done so far: Installed ndiswrapper (latest tarball, make, make install) Ran ndiswrapper -i on the WinXP driver for my USB wireless card Ran ndiswrapper -l which tells me the driver is present and the device is present (lsusb also confirms the device is present) Ran ndiswrapper -m which put an alias for wlan0 in /etc/modprobe.d/ndiswrapper.conf Ran depmod -a Ran modprobe ndiswrapper which tells me "FATAL: module ndiswrapper not found" Ran modprobe -l which shows no listing for ndiswrapper I even tossed in a reboot or two while trying various combinations of the above, still nothing. So naturally ifconfig wlan0 up isn't working because the device isn't being created, presumably because the module isn't loading the driver. Does anybody have any suggestions? Everything points to the notion that this should work fine, but modprobe just isn't able to find what it needs. Have I missed an important step?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >