Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 74/128 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• OpenVPN client on Amazon EC2

  - by Matt Culbreth

  I have an account with an OpenVPN service, and I'd like to get that running on my EC2 instance running Ubuntu 12.04. I have my config file in /etc/openvpn, and it connects fine when I run sudo openvpn --config matt.ovpn. However, I then lose connectivity to the EC2 machine, and I can't SSH back to it until I reboot. Previously I have done things like sudo ip rule add from IP_ADDRESS table 10 and then sudo ip route add default via GATEWAY_IP table 10, but that's not working on EC2. Any ideas? My private IP address right now is 10.209.29.XXX and my gateway is 10.209.29.1.

  Read the article

• What could be the maximum number of hosts on a 100BaseTX ethernet network ?

  - by snowflake

  Hello, I'm having two ip networks (192.168.1.x and 192.168.2.x) bridged on a server, but all hosts (fixed IPs) are on the same physical 100BaseTX ethernet (with a daisy chain of 48ports switchs). Often, I loose link between the server and hosts of the second network. Usually if I reboot the host, the connection work again, and if I force connection to be active, the connection keep alive until I ping after a while without active connection. I'm wondering how many hosts can be connected on the same network without troubles, and eventually how many switches can be daisy chained ? I suppose maximum length between hosts to be 100meters to the hub or 200meters between extremity of the network. Somebody is suggesting 8 switches here : http://www.tek-tips.com/viewthread.cfm?qid=1137879&page=12 Any comments on how to find a solution to the problem and not answering directly to the question are welcomed!

  Read the article

• Restart my graphics card without rebooting?

  - by defaye

  Wondered if it is possible to use DevCon to restart a display device as a stop-gap solution to artifacts left over from a graphics card malfunction? In particular it leaves my cursor very un-user-friendly: I found out the hardware ID of my display adapter through device manager (below) [(windows key + pause break) - device manager - display adapters - right click your display adapter - properties - details - hardware ids.] I tried the commands (opened with admin privileges) devcon restart "PCI\VEN_1002" and devcon restart =display but it always come back with No devices restarted.. Is it even possible to restart the graphics card without a system reboot?

  Read the article

• Windows XP, USB-Stick and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• Ubuntu hangs on boot when NFS-mounting entries in /etc/fstab, but they mount cleanly otherwise

  - by lorin

  I'm managing several Ubuntu 9.10 servers that NFS mount several folders (including /home). I'd like these folders to be mounted at boot time. I would like to have several entries in my /etc/fstab to accomplish this, e.g. 192.168.1.100:/home /home nfs rw 0 0 192.168.1.100:/usr/ansys_inc /ansys_inc nfs ro 0 0 Unfortunately, with this configuration, the servers usually (although not always) hang during the bootup sequence when trying to do the NFS mount. if I comment out these fstab entries, reboot the machine, uncomment them and mount them manually using the shell, the folders mount cleanly. I'm not sure how to go about debugging this problem. It seems like it has something to do with the boot sequence, that some relevant process hasn't been started by the time the OS tries to mount the folders.

  Read the article

• Recovering from bad ownership

  - by Christian Sciberras

  I was going to change the ownership of a directory to apache:apache, but I ended up running: chown -R apache:apache / Bad! Very bad! I knew what was going on when it started saying: chown: changing ownership of `/proc/2694/fd/48': Permission denied That's when I stopped everything (Ctrl+C). The current system I have is a server running virtualbox running CentOS 5. This problem happened inside the VM. Currently, everything seems to be working, but I have not restarted the system yet, and to be honest, I'm afraid that if I did something will break. I do not know chown's order, should I be concerned and assume something will break after a reboot? Is there a way to recover form this problem without having to rely on backups? I do have a daily one, but I thought there may be a simpler way out.

  Read the article

• Windows 7 Home Premium - Unable to View Chinese Characters Properly

  - by David

  Is there a proper and permanent fix that will restore the display of Chinese Characters on a Windows 7 Home Premium Laptop computer? This problem has been occurring frequently now and a simple reboot no longer does the trick. The square boxes viewed on many applications and websites has been constantly bothering me and I wish to fix it asap. I have done a lot of research on it but have not been successful. Many responses were to install the language packs for Windows 7 Ultimate Users which apparently is not my case or to configure the "Region and Language" settings of the Control Panel, changing the system locale. Does anyone have any suggestions? All would be appreciated!

  Read the article

• Realtek "Microphone Effects" no longer working

  - by abc

  I have a mic plugged into my computer, and I was able to use the "microphone effects" tab here to enable/disable noise suppression and acoustic echo cancellation. Noise suppression off and acoustic echo cancellation on were the most recent settings I had on before the problem occurred. I disabled my mic in the windows 7 "recording devices" tab, then re-enabled it. When it came back, these options were grayed out, and remained so even after a reboot. I am not sure why this is or how to fix it, all other options are still the same (Settings are identical to when it was working). Any ideas whats wrong or how to fix it? edit: can't post image due to being new.

  Read the article

• Windows undetectable after interrupted chkdsk

  - by Felthragar

  I have a computer that is running Windows XP. For some reason, the other day it wouldn't start giving me the following message: "ntoskrnl.exe is missing or corrupt" So I put the XP disc in the tray and fired up the repair console and ran the following: chkdsk /r It was on for about eight hours and it got to about 52% I believe. Then there was a power outage and the computer shut down (obviously). Today when I was booting it, it isn't even detecting there's an OS anymore. If I boot the computer with no cd in the tray it says: "Reboot and select a proper Boot device or Insert Boot Media in selected Boot device and press a key" If I run the repair console, or the xp installation program it isn't finding any OS installations. Any ideas on what to do next? Any help is appreciated. Thanks! Update: After turning boot-time diagnostics on, I got this message when booting without cd (instead of the previous one): "Couldn't open drive multi(0)disk(0)rdisk(0)partition(2)"

  Read the article

• Enabling SFTP Access within PLESK

  - by spelley

  I have a client who wants to ensure his upload is secure, so we are trying to enable SFTP for him on our Linux PLESK server. I have enabled SSH access to bin/bash for FTP accounts, and created a new user. When I attempt to SFTP using either the IP address or the domain name, this is the error FileZilla is giving me: Error: Authentication failed. Error: Critical error Error: Could not connect to server Here is some basic information regarding the server: Operating system Linux 2.6.24.5-20080421a Plesk Control Panel version psa v8.6.0_build86080930.03 os_CentOS 5 I had read in some places that I should reboot the SSH Service in Server - Services, however, there is no SSH Service within the list. I'm not really a server guy so it's quite possible I'm missing something obvious. Thanks for any help that you guys can provide!

  Read the article

• How do I tell if my solid state hard disk is bad?

  - by Guy

  I have a Windows 7 Ultimate computer (Shuttle) that I built myself and in it I put a Solid State Drive (SSD). It's been working well for a number of months but now when I start it there are problems. I have 2 users setup on the computer and when I try and sign in with either user it claims that the password is incorrect. I could understand the odd typo but I've had my wife try it as well and we've got the passwords correct. On top of that it will remain at the login screen for 1 minute and 20 seconds and then spontaneously reboot without shutting down. So I'm trying to work out if this is a hard disk problem or something else. Any ideas? (I have a nightly backup to a WHS so it will be easy to recover but I don't want to do that unless I have to and don't want to waste time putting in a new HD just to discover it's something else.)

  Read the article

• Why do I have no TTY on a basic Ubuntu 9.10 server install?

  - by pr1001

  I have reinstalled Ubuntu 9.10 Server several times on a bog standard 1RU server and each time I finish the install and reboot I see GRUB run and am then presented with a black screen. The machine is running just fine, as I am able to SSH in, but I can't see anything on the attached monitor. I have a simple LCD screen connected via VGA and a signal is apparently being output to it, as it doesn't go asleep. Looking at /var/log/syslog I see: Mar 24 14:57:44 bridge5 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] However, I later see: Mar 24 14:57:44 bridge5 kernel: [ 0.001368] console [tty0] enabled Any thoughts? Thanks!

  Read the article

• How do I launch a process as a specific user at startup on OS X?

  - by Scott Bonds

  I would like to run a script as a particular user on startup (not on login). I thought a launchd LaunchDaemon would do it, but 'man launchd' says: "If you wish your service to run as a certain user, in that user's environment, making it a launchd agent is the ONLY supported means of accomplishing this on Mac OS X. In other words, it is not sufficient to perform a setuid(2) to become a user in the truest sense on Mac OS X." They aren't kidding--when I try to run my script as a LaunchDaemon it doesn't work. In particular I'm trying to automate some keychain operations using the 'security' command, and it won't let me change the default keychain when I run the script through LaunchDaemon, though the script works fine when run using sudo from a shell. A LaunchAgent won't work, because the goal is for the proces to run without a user logging in and LaunchAgents only run when someone logs in. I looked at cron and the @reboot directive and that looks promising, but I read that cron is deprecated on OSX.

  Read the article

• How do I configure networking on CentOS 6 running on hyper-v?

  - by LonelyLonelyNetworkN00b

  I'm not using legacy adapters, and i've installed Linux Integration Components 3.2. THe problem i'm facing is that the command 'setup' or 'system-config-network' doesn't list any network interfaces. If i run ifconfig -a i can see both the network cards i've attached. By setting a ip using ifconfig i can get network connectivity. The problem is that it's not persistent after a reboot. I'm a 100% centos newbie, but I figure it has something to do with that the centos installer couldn't see the NICs on install. How can I fix this?

  Read the article

• Thunderbird 3.0 refuses to start on Mac OS X?

  - by jtimberman

  I just downloaded Thunderbird 3.0 on my Macbook Pro running Leopard, and installed it in /Applications. When I attempt to start it, the icon opens on the Dock as normal, but I get the following dialog. I don't have a ~/Library/Application Support/Thunderbird directory at all, let alone a .parentlock file. While I didn't expect it to help, I did reboot my system. And sign out and back in. And close all programs besides Thunderbird. Earlier versions of Thunderbird have worked just fine.

  Read the article

• Any way to make service do not autostart in Ubuntu/Debian, but leave K00 scripts in place?

  - by Evgenyt

  I need to have only stop scripts in rcN.d (runlevels 0,1,6) for apache2. So that I always start it by myself, but when reboot occurs server will shut down apache2 properly. And when I change runlevel 2-3 server doesnt' touch apache daemon (leaving it in the state it is). Basically, I just need a legal way to remove apache2 startup symlinks from rc2.d - rc5.d. With tools like update-rc.d. I can just remove those symlinks by hands, but I'm not sure if this is a proper way for this.

  Read the article

• Using unsigned drivers in Windows 8

  - by T. Fabre

  I just migrated from Windows 7 x64 to 8, but I can't get my VPN software to run anymore : the SafeNet IKE service (installed by SafeNet SoftRemoteLT GA, used by my VPN provider) cannot start anymore. I found that by default unsigned drivers are disabled on Win8, and that is what is blocking the driver. The System event log tells me that the driver (apparently, C:\WINDOWS\SysWow64\Drivers\IPSECDRV.sys ) was blocked when I try to manually start the service (SafeNet IKE Service). I get the same messages for another driver, crypto.sys found in the same folder. I tried using bcdedit to enable unsigned drivers : bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit /set testsigning ON After reboot, same error. I tried by booting into Win 8's test mode, same issue. Applying the code signing policy (Enabled, Ignore) does not help either. Running gpresult does show that the policy is applied. Any help welcome.

  Read the article

• Windows 7 "Could not reconnect all network drives" on boot

  - by Thermionix

  Windows 7 won't reconnect to my network drives on startup. Once it is done booting opening Windows Explorer and clicking each share will mount them. Windows 7 Enterprise N Service Pack 1 I have attempted formatting the windows machine - first thing done to machine was to map the network drives, upon reboot they were disconnected. It is running on an Crucial M4 64gb SSD. The host of the network shares is a Ubuntu-Server machine connected through a gigabit switch. A modem provides dhcp, although both these machines have static IP's defined. It won't reconnect the drives regardless of whether they're SAMBA shares or NFS shares - therefore I believe it's an issue with the windows machine. Ubuntu 11.10 (GNU/Linux 3.0.0-12-server x86_64) I've tried using ip address instead of netbios name for mapping shares on the windows machine, Also tried setting EnableLinkedConnections=1 gpedit.msc Computer Configuration - Administrative Templates - System-Logon - always wait for the network at computer startup and logon = yes

  Read the article

• How to diagnose a Windows XP hard crash

  - by Jon

  I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

  Read the article

• Server not responding to SSH and HTTP but ping works

  - by yes123

  Hello guys, I requested an hard reboot because none of ssh and http worked. Ping worked normally. Which logs should i check to understand what was the problem? Thanks! (debian 6 on lamp) Edit: my memory and swap: Mem: 4040068k total, 1114920k used, 2925148k free, 109212k buffers Swap: 1051384k total, 0k used, 1051384k free, 283820k cached 4 GB ram (and more than 1TB of HDD) The cause is from 2 days ago: look how the usage of swap goes +60% in less than 10hours My control panel reports this as top 5 memory usage process: If every apache2 process is 190MB large that sux because IF i do TOP i have 262 sleeping process most of them are apache2! My apache mpm_prefork settings are: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 ServerLimit 1500 MaxClients 1500 MaxRequestsPerChild 2000 </IfModule> KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4

  Read the article

• How Exchange integrates with DC

  - by TheD

  This probably is a very open ended question, but really I'm only looking for a specific aspect I suppose. It relates to a reboot question I posted earlier, relating to restart orders of servers, Server Restart's and Respective Orders. Please take a look if you get a second for input! Basically - in relation to how Exchange integrates with AD, what would happen in two scenarios: 1). The Exchange server is booted up before the DC is online 2). You replace a DC but keep your current Exchange server. I'm fairly new to all of this, so hopefully this isn't a silly question (I'm an apprentice in fact!). Many thanks

  Read the article

• Enter / Return key stops working

  - by andygrunt

  I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to? UPDATE: Thanks to CarlF's suggestion, I tried exiting running programmes and found it seems to be a problem with PhraseExpress.

  Read the article

• I get a consistency y error when I use my second hard drive

  - by Stavros

  I have two hard drives with win8 installed to both of them. Sometimes, when I boot from the second one (with F12 boot-menu and the second drive selection) and later reboot and start my PC from the first one, I get a disk error for a consistency problem. Windows ask for a disk check and after that, I can't anymore boot from the second drive or have access to it. Why this happens and how can I prevent it? What options do I have except from reinstalling windows? Thanks Stavros

  Read the article

• Windows 7 login automically puts "IIIII....." in password, so it is impossible for me to login?

  - by xaisoft

  I have no idea why this is happening. I have ran multiple malware programs, I have run anti-virus programs, I even restored to an early point in time. The keyboard letter "I" doesn't appear to be stuck, I am using an external keyboard by the way. When I reboot the computer and get to the login screen, when I press ctrl-alt-del to login, it the password textbox starts putting "IIIIIIIIIIII......", it only stops when I bang on the keyboard. I also noticed at one point that my caps lock on turned caps off and caps lock off turned caps on and some other weird behavior. I have tried search online for similar issues, but no luck.

  Read the article

• Windows 8.1 & manual removal of "Sentinel Runtime Drivers"

  - by uos??

  I'm trying to install Windows 8.1 (basic upgrade from Windows 8). It is complaining of Sentinel Runtime Drivers incompatibility. I've looked for it in my Programs & Features list, but it's not there by that name nor SafeNet (as related by google search) nor do I see any obvious candidates for it having been bundled with another listed application. I tried the "Sentinel Runtime Driver Cleanup" program from the SafeNet website. It ran but was ineffective, even after a reboot. Do you recognize this "Sentinel Runtime Drivers"? I ran MalwareBytes too, just in case, but it found nothing.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >