Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 72/365 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Is there analog of aticonfig --set-powerstate for open source radeon driver?

    - by vava
    I'm running Ubuntu 9.04 on relatively old laptop with ATI Mobility x600 inside. On the last version of Ubuntu, when I was able to run proprietary fglrx driver, I was able to slow down graphic card by aticonfig --set-powerstate 1 and save some battery charge. Now I forced to run open source driver as ATI decided to drop support for old cards. But I can't find a way to control power states now except relying on DynamicClocks option in xorg.conf. But I really know better when and what powerstate I want, so is there a tool that let me change power state manually or at least let me somehow change the behavior of automatic power state selection?

    Read the article

  • Need advice on PC components for high-end games but in limited budget

    - by Md Atif
    I need advise, I want to buy PC components which will be good for gaming as well as be under my budget. First thing I chose is Graphics card : ATI HD 7850 2GB DDR5 then matching things up with this selected following: Processor: AMD 3.5 GHz AM3 FX 8320 8 Core Piledriver Mobo: MSI 990FXA-GD65 RAM : 8GB DDR3 (4x2) Is this setup looks compatible? If making any of above component inferior will have negligible affect on performance/gaming(like buying 970 chip mobo instead of 990) then please let me know so I can save some money :) ? Any other advice?

    Read the article

  • 1080 HD video display - Windows 7

    - by blasteralfred
    I am running Windows 7 in my Dell Studio 1555 Laptop. I have ATI Mobility Radeon HD 4570 graphics card inside. When I try to watch a video, I can see only some disturbed texture. I can hear the audio and no prob with that. The I can see the video frames peeking sometimes but is pretty slower. I have DirectX (directx_feb2010_redist) and Win7 codecs installed. Here are some screenshots; The video details are; Name: video.mp4 Frame width: 1920 Frame height: 1080 Frame rate: 29 fps data Rate: 7958 kbps Total bitrate: 8052 kbps Just comment if you want more info.

    Read the article

  • Using international phone numbers on iPhone [closed]

    - by Cawas
    Spin off question Is it possible to hack a SIM card to add a javacard application on it (to properly format international numbers)? If yes, how? Original Question In my previous phone carrier I could just dial +55 11 99883655 and it would just work. Now I moved to a new carrier and it doesn't work anymore! When I dial the same international number it keeps saying the number isn't formated correctly. How can I get my iPhone to understand international numbering back again? I've got over 100 contacts with numbers stored in this format already, and I want to keep them that way. edit: I originally asked this question here, moved it to apple stackexchange and now I'm bringing a new one (hopefuly).

    Read the article

  • How to Find Out What Version of Display Driver is Installed

    - by Artium
    One of my favorite games, "Wolfenstein Enemy Territory", has stopped working lately. It throws a segfault during the initialization phase. I suspect that the reason is a recent update to the video card driver. The problem started after I updated Ubuntu but I do not remember if there was a driver update in the list. My question is how can I check this. How can I view the current version of the display driver installed and the date it was last updated? If I discover that this is indeed the problem, will it be possible to revert the update and stay with the previous version of the driver?

    Read the article

  • Mountain Lion screen crashes after returning from sleep

    - by Aron Rotteveel
    During the past 3 days I have experienced the following issue: when returning from sleep, I see an extremely garbled version of my desktop. The only thing that seems to help is a reboot. My first guess is that this is related to the video card. After looking into this issue, I found a lot of problems related to ML and returning from sleep, such as this post on AskDifferent, but I think this is a different issue because it does not speak of a garbled screen. Some more details: System: MacBook Pro 15" early 2011, 2,2GHZ I7, 8GB Ram, AMD Radeon HD6750M 1024 The issue seems to happen only when I open my laptop in the morning; if I close and open my laptop during the day, it does not seem to happen. The issue 'solves' when rebooting. Photo of how this looks: Update November 27th 2012: I re-installed my laptop a couple of weeks ago, which seemed to have solved the problem, but sadly, it still persists.

    Read the article

  • What is causing my internet to be slow on one laptop but not the other and only at a distance?

    - by Matt Case
    I have a newer laptop, purchased within the last year (acer aspire 7740). This laptop does not have any problem connecting to wireless networks and indicates that the signal strength is excellent on most of the wireless networks I connect to. When the laptop is within 10 feet of my wireless router it gets 30 down 10 up. When it is farther away than 10 feet it will be lucky to get 3 down and 1 up. I also have an older laptop, purchased in 2005, that has no problems at all at the same range. None of my phones, gaming consoles or tablets have this problem. I am beginning to think that the problem must be some hardware defect with the wireless card. I can provide additional information if needed. Just thought I'd check to see what others thought because I've been working on computers my whole life and have never heard of this happening. I have also tried to change the channels on my wireless router and have had no success with this idea.

    Read the article

  • Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

    - by Robert
    From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

    Read the article

  • Is it possible to use two separate USB tuners with Windows Media Center?

    - by Lunatik
    I'm planning to replace my traditional PC-style media center (with twin tuners) with an Asrock Ion 3D (or similar) but this means forgoing my existing PCI-E dual tuner card for a USB solution. Since Freeview HD (using DVB-T2) is now available I'd like to equip my media center to take advantage. The trouble is there are currently no dual DVB-T2 USB tuners on the market (that I can find anyway). Would I be able to plug two separate USB tuners and have them correctly picked up and working within all apps, including Windows Media Center? Are there any caveats I might need to bear in mind when using two tuners in this way?

    Read the article

  • DVI-D Splitter Not Working with GeForce 8400gs

    - by jimdrang
    I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

    Read the article

  • DisplayPort to DVI not working on Quadro FX 580

    - by kaosvid
    I have a PNY NVIDIA Quadro FX 580 graphics card with 1x DVI and 2x DisplayPorts. The DVI port works fine with both my Viewsonic monitors but I cannot get either of the DPs to work using the supplied DP to DVI adapter; all I get is a "no signal" on either monitor when connected to either DP port. The NVIDIA Control Panel shows that the second monitor is not connected when in fact it is. How do I get the second monitor to work? System: Windows XP Professional 32-bit Asus P5Q motherboard Core 2 Duo E8500 CPU 4GB PC8500 RAM

    Read the article

  • Ubuntu 9.10 freezes when HDMI port is connected

    - by Felipe Hummel
    I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

    Read the article

  • After turning my monitor off and on, it will display only a white screen

    - by Narf the Mouse
    About a month after installing a new graphics card, I started encountering a rather frustrating problem. Namely, if I turn my monitor off for any significant length of time, then turn it back on, it displays only a white screen. Previously, restarting could fix the problem. However, after leaving the computer off last night, the problem persists. An internet search turned up this site; however, the monitor cable is not loose. As for the insides of the monitor - Well, I could poke around, but I risk making it worse if it's not the monitor. Any such instructions should be clear, detailed and include pictures. Further updates as events warrant.

    Read the article

  • second monitor wont display

    - by Ryan
    hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

    Read the article

  • second monitor wont display [closed]

    - by Ryan
    hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

    Read the article

  • Windows 7 ATI 6470M

    - by p_piorkowski
    I have some problems with my Dell Vostro 3350. I have to graphic card - Intel and ATI radeon 6470M. I have installed this driver. It's fresh installation of Windows 7. And my problem is that in device menager I can see in section graphic cards AMD Radeon HD 6490M and Intel(R) Graphics Family. Another thing is that I'm using two screens. And I want to use ATI readeon as default. At this moment I'm event not sure if ATI is working. Another strange thing is that when I run Catalyst Control Center in section Destkop Menagement i don't see nothing.

    Read the article

  • No wireless adapter in msi u200

    - by Mino Marimat
    I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

    Read the article

  • Windows 7 treating my third monitor as an extension to my second rather than detecting it as a stand alone

    - by user331837
    I am trying to attach a third monitor to my PC, however I am coming across a rather strange issue. Windows screen resolution is still only showing that I have two monitors connected, but the second has been extended over both the second and third monitors. Basically, it shows as the main display being a normal size, and the secondary as being twice as long as normal. I have my main connected via a the display port, and the second and third are using two of the three mini HDMI ports my video card provides. How do I get windows to accept my third monitor the same as it does my second?

    Read the article

  • After installing Windows 7, there're lines on the screen

    - by user22589
    Hi, I've just installed Windows 7 on my Dell machine. Everything works fine except that there are one or two lines on the screen. The line is so random and I am sure that it's now the monitor problem. The graphic card is NVidia GeForce 7600. I replaced the default driver with the driver from the manufacturer and it didn't help. When I change screen setting, the line goes away for a while and it comes back in different location. Sometimes an app window has the line and if I move the window the line follows with the window. What can I do to fix it? Thanks. Sam

    Read the article

  • Some info about SD card patitions after the use of the dd statment and some oiters doubts?

    - by AndreaNobili
    I am not very experienced using Linux and I have the following situation that cause me some doubts. I have wrote RaspBian (the RaspBerry linux distribution) on an SD card using Ubuntu dd statment: sudo dd if=2014-01-07-wheezy-raspbian.img of=/dev/sdb bs=1024 So if now I perform the fdisk -l statment I obtain that I have 2 partitions related to my SD card, that are the followins: Dispositivo Boot Start End Blocks Id System /dev/sdb1 8192 122879 57344 c W95 FAT32 (LBA) /dev/sdb2 122880 5785599 2831360 83 Linux And now the first doubt: the dd statment create on the SD card two partitions: 1) /dev/sdb1 that is a litle FAT32 partition (what it means (LBA)?) 2) /dev/sdb2 that is a larger Linux ext3 partition Ok...the doubt is: why it also create to me a FAT32 partition and not only a Linux ext3 partition? Ok...if I go into my computer resource I can see a device (related to my SD card) into the devices list that contains some RaspBian file, following a screenshot: And if I see the property of this device I obtain this: So, looking at the previous screenshot it seems to me that this is the small FAT32 partition, and now I have the followings doubts: If it is the smallest FAT32 partition, what contains? The RaspBian boot or what? Why, in the devices list, I have only the FAT32 partition and not also the Linux one (/dev/sdb2), to see it have I to mount it? how? Tnx

    Read the article

  • How can I remove unmounted SD Card icons from my desktop?

    - by user75286
    I have been using some audio utilities in Ubuntu 11.10 to tweak .mp3 files on my phone (Motorola Photon 4G). I connect via USB... both my phone and the internal SD card are mounted as two separate drives. The SD card has an unusual drive name with some odd characters. When I'm finished, I unmount my phone (or "safely remove drive"), but the SD card can't be unmounted. I've mounted and unmounted my phone on 4 occasions now, and there are now 4 SD card drive icons that I can't remove from the desktop. I tried using the gconf-editor/apps/nautilus/desktop trick to make drives invisible and it's not working. Right-clicking on the icons and selecting "unmount" produced the following error message; (I can't type the unusual drive name characters... replaced with xxx) Unable to unmount xxx umount: /media/xxx is not mounted (according to mtab) How can I remove the unwanted icons from the desktop and is there a method for avoiding this problem in the future? Thanks!

    Read the article

  • Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

    - by echo-flow
    I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

    Read the article

  • New mainboard with 890GX chipset disables lightdm, even when using old graphics card instead of onboard graphics, startx works (Xubuntu 12.04)

    - by user99250
    I am trying to migrate an installed Xubuntu 12.04 to a new mainbaord with 890GX chipset. The Chipset has a built-in Radeon HD 4290 graphics. The system boots, but X won't start. The most suspicious message in Xorg.0.log is "ddxSigGiveUp: Closing log". When searching for this message, I found some answers like "remove your xorg.conf" (but there is none on my system). Or bug reports for fglrx (but that's not installed on my system). Or NVidia-related questions ... Interestingly, "startx" succeeds in opening a basic XFCE session. Then, I tried to disable the onboard graphics in the BIOS setup and use the old PCIe graphics card (Radeon HD 5450). No change. I don't think I can just blacklist a module, because the graphics card and the onboard graphics are covered by the same module. At the moment, use the free radeon drivers, not the restricted fglrx driver. If possible, I would like to stay on the free driver for two reasons: The fglrx driver from the ubuntu packages fails to build the kernel module. In past, I had bad experiences with the fglrx driver and changing screen config with RandR. When I connect the harddisk and the graphics card to my old mainboard, everything works again. This means, I have not screwed up my system configuration wile installing and removing the fglrx drivers. When I ordered this mainboard, I thought the 890GX is old enough to be supported and if not, I could still use my graphics card as backup solution. But without even the backup soluton, I'm screwed ... Any ideas ? Thanks and Regards, Kubuntu-Man (now switched to Xubuntu)

    Read the article

  • Storing data on SD Card in Android

    - by BBoom
    Using the guide at Android Developers (http://developer.android.com/guide/topics/data/data-storage.html) I've tried to store some data to the SD-Card. This is my code: // Path to write files to String path = Environment.getExternalStorageDirectory().getAbsolutePath() + "/Android/data/"+ctxt.getString(R.string.package_name)+"/files/"; String fname = "mytest.txt"; // Current state of the external media String extState = Environment.getExternalStorageState(); // External media can be written onto if (extState.equals(Environment.MEDIA_MOUNTED)) { try { // Make sure the path exists boolean exists = (new File(path)).exists(); if (!exists){ new File(path).mkdirs(); } // Open output stream FileOutputStream fOut = new FileOutputStream(path + fname); fOut.write("Test".getBytes()); // Close output stream fOut.flush(); fOut.close(); } catch (IOException ioe) { ioe.printStackTrace(); } When I create the new FileOutputStream I get a FileNotFound exception. I have also noticed that "mkdirs()" does not seem to create the directory. Can anyone tell me what I'm doing wrong? I'm testing on an AVD with a 2GB sd card and "hw.sdCard: yes", the File Explorer of DDMS in Eclipse tells me that the only directory on the sdcard is "LOST.DIR".

    Read the article

  • SoundManager2 has irregular latency

    - by Stefan Monov
    I'm playing some notes at regular intervals. Each one is delayed by a random number of milliseconds, creating a jarring irregular effect. How do I fix it? Note: I'm OK with some latency, just as long as it's consistent. Answers of the type "implement your own small SoundManager2 replacement, optimized for timing-sensitive playback" are OK, if you know how to do that :) but I'm trying to avoid rewriting my whole app in flash for now. For an example of app with zero audible latency see the flash-based ToneMatrix. Testcase (see it here live or get it in an zip): <head> <title></title> <script type="text/javascript" src="http://www.schillmania.com/projects/soundmanager2/script/soundmanager2.js"> </script> <script type="text/javascript"> soundManager.url = '.' soundManager.flashVersion = 9 soundManager.useHighPerformance = true soundManager.useFastPolling = true soundManager.autoLoad = true function recur(func, delay) { window.setTimeout(function() { recur(func, delay); func(); }, delay) } soundManager.onload = function() { var sound = soundManager.createSound("test", "test.mp3") recur(function() { sound.play() }, 300) } </script> </head> <body> </body> </html>

    Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >