Search Results

Search found 19125 results on 765 pages for 'hard disk'.

Page 73/765 | < Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >

• I found a some bad sectors with chkdsk. Should I be worried?

  - by mottalrd

  Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

  Read the article

• end_request: I/O error, dev sda, sector xxxxxxxxx

  - by muruga

  I have a IBM server. This server contains 3 hard disk with RAID 5. It was working fine earlier. Unfortunately this machine got the following error message. After that I have rebooted the systems. After that I am getting the following error message in kern.log and demsg kernel: [65896.678870] end_request: I/O error, dev sda, sector 17430271 kernel: [69263.783957] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK : [69263.783957] sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] kernel: [69263.783957] sd 0:0:0:0: [sda] Add. Sense: Internal target failure Whether it is kernel problem or hard disk problem or Raid problem

  Read the article

• Second HDD not seen by Windows 7 on Dell Xps l501x

  - by George

  I have a Dell XPS Laptop (l501x). I have replaced the original Seagate 500GB hard drive with an SSD Intel 320 120GB when I first purchased it a year ago. It's been working great. The laptop is booting in about 23 seconds, so the SSD is great. I have an Acronis image created that I came back to every three months just to keep everything clean. The SSD is partitioned with one logical drive for my data. So, recently I thought since I am not using my optical drive often enough to swap it out with a HDD caddy and add my seagate 500gb hard drive. I ordered the caddy placed the HDD in it and now load Windows. It just hangs on the screen that should show the Windows logo. I have tried everything that I know and searched it online. I have uninstalled the SATA controller AHCI and let Windows install it. Still will not boot into windows. I wanted to mention that the Seagate 500GB drive was the one that came with my laptop before I switched to the Intel SSD. As you know Intel has this application called Intel Rapid Technology which loads once in a while and shows the second hard drive, but then, when I restart it hangs again and Windows will not load. As soon as I remove the HDD Caddy and restart it loads Windows fine. I also formated the Seagate 500GB HDD in NTFS and still Windows will not load. When I go into the BIOS it shows the Fixed SSD and also "Sata ODD 500GB" instead of the optical drive but it will not boot into Windows when the HDD caddy is present. There is nothing wrong with the caddy. I have another laptop (Asus) and I installed the HDD caddy and Windows 7 loads without any glitch. I don't get it. I have also flashed the BIOS because Dell had a new version (A08). I also wanted to add that I refreshed Disk Management and the Device Manager and the second drive does not display. At this point I think it's a Windows issue so before I reinstall Windows 7 Home Premium from scratch I wanted to see if there was anything I was missing. Any advice would be greatly appreciated.

  Read the article

• Reclaiming deleted disk space from file vault

  - by cbrulak

  I have my main user account encrypted with file vault. After deleting some data (like 20 GB) my free space on the hard drive hasn't change (yes I emptied the trash, confirmed that the files are actually gone, etc,etc). I also tried "erasing free space" in the disk utility app. I logged off, and rebooted and so far that space hasn't been reclaimed. I'm assuming file vault or disk utility has some method of reclaiming but I can't find it. Any ideas?

  Read the article

• Is a computer's DRAM size not as important once we get a Solid State Drive?

  - by Jian Lin

  I am thinking of getting a Dell X11 netbook, and it can go up to 8GB of DRAM, together with a 256GB Solid State Drive. So in that case, it can handle quite a bit of Virtual PC running Linux, and Win XP, etc. But is the 8GB of RAM not so important any more? Won't 2GB or 4GB be quite good if a Solid State Drive is used? I think the most worrying thing is that the memory is not enough and the less often used data is swapped to the pagefile on hard disk and it will become really slow, but with an SSD drive, the problem is a lot less of a concern? Is there a comparison as to, if DRAM speed is n, then SSD drive speed is how many n and hard disk speed is how many n just as a ball park comparison?

  Read the article

• Create new partition on ssd hard (remove hibernate)

  - by Aleks

  I bought Dell Vostro 3360 notebook with Windows 7 It has 128 GB SSD hard disk, it is already has 4 partitions: Dell partition, Recovery partition, OS partition, Hibernate partition. Here is screenshot (Russian language, but I made some marks): I want to split OS partition, because I need c:\ and d:\ . Reason is that I have a lot of difficulties with administration mode on c:. So I tried to split OS partition but I already have 4 partitions. Can I remove hibernate partition without consequences? I have Hibernate disabled in settings, but I have hiberfil.sys file on c:\ If I can remove it, how can I do this, I can't do this with standard GUI disk managment tool

  Read the article

• How can I monitor disk access for a certain file?

  - by AlexC

  I want to use performance monitors to determine when a file is being accessed (read/write). Is this possible? If not, is there any other way? My OS is Windows Server 2008 R2, and I am writing the code in C#.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• CPU and HD degradation on sourced based Linux distribution

  - by danilo2

  I was wondering for a long time if source based Linux distributions, like Gentoo or Funtoo are "destroying" your system faster than binary ones (like Fedora or Debian). I'm talking about CPU and hard drive degradation. Of course, when you're updating your system, it has to compile everything from source, so it takes longer and your CPU is used at hard conditions (it is warmer and more loaded). Such systems compile hundreds of packages weekly, so does it really matter? Does such a system degrade faster than binary based ones?

  Read the article

• I get a consistency y error when I use my second hard drive

  - by Stavros

  I have two hard drives with win8 installed to both of them. Sometimes, when I boot from the second one (with F12 boot-menu and the second drive selection) and later reboot and start my PC from the first one, I get a disk error for a consistency problem. Windows ask for a disk check and after that, I can't anymore boot from the second drive or have access to it. Why this happens and how can I prevent it? What options do I have except from reinstalling windows? Thanks Stavros

  Read the article

• Updating windows xp hard drive controller from ubuntu live disk

  - by Joel

  The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

  Read the article

• How to change hybrid disk to basic disk in windows 7?

  - by Marco

  I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

  Read the article

• Can't change current working directory to external drive in Windows

  - by Tom

  I'm trying to run a program located on an external USB disk using the Windows command prompt. I'm running Windows 7 64-bit (running in VMWare Workstation 8.0.) Here's what happens: I plug in the USB disk and it appears as drive letter 'E' in My Computer. I launch cmd from the start menu. I notice the prompt displays C:\Users\Tom> I type cd E:\ I notice the prompt displays C:\Users\Tom> (cd also yields C:\Users\Tom>) I can explore the drive using explorer.exe just fine, and it is connected according to VMWare Workstation. What am I doing wrong?

  Read the article

• When copying VM filesystem over netcat, dd copies double the disk size

  - by JivanAmara

  I'm attempting to copy the disk of a working headless virtualbox VM (VM1) on one server to a new VM (VM2) on a vCloud server. I don't have access to the host of VM2. The OS is Windows Server 2003 (32-bit) I start both VMs with a live Knoppix image. I run 'nc -l | dd of=/dev/sda bs=512' on VM2 I run 'dd if=/dev/sda bs=512 | nc ' on VM1 I previously did this with another windows VM and it worked fine. VM1 has a disk of size ~70GB (verified with fdisk); however, the amount of data dd reports read/written is ~139GB. Of course the target machine doesn't work properly. I get a Windows splash screen, then blue error screen with general 'system not working' information. I'm at a loss what could cause this. Any ideas?

  Read the article

• plugging in a 3.3V 50pin laptop HDD to USB?

  - by barlop

  I have a 50pin laptop hard drive. 1.8" wide. This 50pin connector concerns me.. Even if I get an adaptor, How can I know which side of the connector takes the power? I don't want to plug it in the wrong way. And I don't have n adaptor.. Could people link me to adaptors too. but main question is, which side to plug it in when I get the adaptor. I want to be sure. I do not want to blow the hdd. For the 3.3V I have a plan. Connecting green and black and using the orange cable(3.3v) to feed power. I am not too worried about that bit. But as I said.. Main thing is I want to know which side is 3.3V hard drive is MK6006GAH

  Read the article

• Using a CF card as an IDE HDD

  - by dartacus

  I have an old Sony laptop (Vaio TR1-MP) that I like. The HDD has died and since it's a hard-to-find 1.8" IDE hard drive I'm considering buying one of those little CF card adaptors and a 16gb CF card. The total cost of that is about £30 and replacement HDDs for this model are far pricier. Has anyone replaced their HDD with a CF card in this way, and, crucially, is the performance utterly horrible afterwards? ;-) I've seen a couple of threads which hint it's possible but the advice eventually given was just to buy a SSD, but I'm not even sure if its possible to get a 1.8" SSD with an IDE connector that'll fit my laptop. (I freely admit that the most sensible thing to do would be to bin it and just buy a cheap netbook which would be smaller, faster and lighter than the sony, but it does have a very nice widescreen display and dammit I just like it !) Thanks, G

  Read the article

• Add SATA Port to Motherboard?

  - by YAS

  I recently took off the bottom covers to my laptop, an Aspire 6930, and one of the covers was hiding an empty space large enough for a second hard drive. The bit of motherboard that was showing had the solder joints for a SATA port, but no port. What I'm wondering is; If I get a spare SATA port and solder it in would it mess up my motherboard and kill my laptop? I'm not concerned about a clean solder job, I can do that. But if the port is soldered in cleanly if there would be any danger to doing it. It'd be pretty darn awesome to get a second hard drive in my laptop.

  Read the article

• Cause of lost partition replaced by 2 Raw partitions

  - by DwightSampsonite

  Hi, I had a curious problem over the weekend... My 500gb WD hard drive all of a sudden could not be discovered by xp, then when I plugged in again via USB it was being discovered as 2 separate Raw partitions that were asking to be formatted. I have never modified partitions on this drive before. I was scratching my head for about this for 20mins or so when my second 1TB external hard drive did the exact same thing(with the same sized raw partitions as the 500gb). I have since recovered the original partitions and data using Testdisk . I am more curious on the cause.... I suspect this could be a virus, however my machine hadn’t been online in a few days and AVG didn’t detect anything. Has anyone seen this before?

  Read the article

• Super slow time machine backup on my mac

  - by lowellk

  I just got a new 2TB drive which I'm trying to use as a time machine drive for my mac which has a 1TB drive. On my first time trying to back it up, I'm getting terrible throughput, not even 1GB per day (it's been running for 36 hours now). I erased the disk and tried to copy a large file to it and got the same slow speed. What can I do to diagnose this? Are there any tools which can inspect the disk and tell me if it's messed up? Thanks!

  Read the article

• VirtualBox: Grub sees hard drive, Linux does not

  - by thabubble

  I installed Linux on my second hard drive. I can boot to it just fine. But when I try to boot it from a Windows 7 host using http://www.virtualbox.org/manual/ch09.html#rawdisk, grub sees it and can load vmlinuz and initramfs. Log: :: running early hook [udev] :: running hook [udev] :: Triggering uevents... :: running hook [plymouth] :: Loading plymouth...done. ... Waiting 10 seconds for device /dev/disk/by-uuid/{root UUID} ... ERROR: device 'UUID={root UUID}' not found. Skipping fsck. ERROR: Unable to find root device 'UUID={root UUID}' It then drops me into a recovery shell. I checked "/etc/fstab" and it's empty, there are also no sd* devices in dev, the only thing in /dev/disk/by-id is a VBox CD device. I'm not too good with these kinds of things so help would be greatly appriciated.

  Read the article

• Volume expanded in Volume Group, old disk reduced but still in use in system

  - by Yurij73

  Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

  Read the article

• How to back up initial state of external backup drive?

  - by intuited

  I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it. The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk. The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes. I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes. So I've resorted to dumping the disk state and partition data separately. I've dumped the partition state with sfdisk -d /dev/sdb > sfdisk.-d.out I've also created a compressed image of the NTFS partition (the only one on the disk) with ntfsclone --save-image --output - /dev/sdb1 | gzip -c > ntfsclone.img.gz Is there anything else I should do to ensure that I can restore the precise original state of the drive?

  Read the article

• Which way is the fastest to `dd` to the last 512 kilobytes of disk

  - by teerapap

  I have a 512G disk and I want to clear the last 512k bytes at the end of the disk. I usually clear it by dd if=/dev/zero of=/dev/da0 the whole disk. Which way is the fastest to do this operation?

  Read the article

• Finding throuput of CPU and Hardrive on Solaris

  - by Jim

  How do I find the throughput of a CPU and the hard disk on an OpenSolaris machine? Using mpstat or iostat? I'm having a hard time identifying the throughput if it is given at all in the commands output. For example, in mpstat there is very little explanation as to what the columns mean. I've been using the syscl column divided by time interval to find the throughput but to be honest I have no idea what a system call truly is. I'm trying to to analyze a hardrive and CPU while writing a file to the hardisk and when at rest.

  Read the article

• Linux cannot alter partition table of main hard disk of my laptop

  - by djechelon

  I run openSUSE 12.2 on my ASUS N76VZ laptop. My problem is that I cannot alter the partition table of first hard disk /dev/sda1. YaST partitioner says it's unreadable, but actually it can read it but not alter it. It doesn't tell me anything else, except that I can wipe the partition table (having to reinstall Windows for the third time). Since I want to create new partitions on that disk, how do I fix the partition table layout? I could create new partition from Windows Computer Management and format them in Linux. I could do this, but it doesn't explain the problem

  Read the article

< Previous Page | 69 70 71 72 73 74 75 76 77 78 79 80  | Next Page >