Search Results

Search found 1959 results on 79 pages for 'on board peripheral'.

Page 74/79 | < Previous Page | 70 71 72 73 74 75 76 77 78 79  | Next Page >

  • Dell Studio 1737 Overheating

    - by Sean
    I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

    Read the article

  • No GLX on Intel card with multiseat with additional nVidia card

    - by MeanEYE
    I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

    Read the article

  • The Internet of Things Is Really the Internet of People

    - by HCM-Oracle
    By Mark Hurd - Originally Posted on LinkedIn As I speak with CEOs around the world, our conversations invariably come down to this central question: Can we change our corporate cultures and the ways we train and reward our people as rapidly as new technology is changing the work we do, the products we make and how we engage with customers? It’s a critical consideration given today’s pace of disruption, which already is straining traditional management models and HR strategies. Winning companies will bring innovation and vision to their employees and partners by attracting people who will thrive in this emerging world of relentless data, predictive analytics and unlimited what-if scenarios. So, where are we going to find employees who are as familiar with complex data as I am with orderly financial statements and business plans? I’m not just talking about high-end data scientists who most certainly will sit at or near the top of the new decision-making pyramid. Global organizations will need creative and motivated people who will devote their time to manipulating, reviewing, analyzing, sorting and reshaping data to drive business and delight customers. This might seem evident, but my conversations with business people across the globe indicate that only a small number of companies get it. In the past few years, executives have been busy keeping pace with seismic upheavals, including the rise of social customer engagement, the rapid acceleration of product-development cycles and the relentless move to mobile-first. But all of that, I think, is the start of an uphill climb to the top of a roller-coaster. Today, about 10 billion devices across the globe are connected to the Internet. In a couple of years, that number will probably double, and not because we will have bought 10 billion more computers, smart phones and tablets. This unprecedented explosion of Big Data is being triggered by the Internet of Things, which is another way of saying that the numerous intelligent devices touching our everyday lives are all becoming interconnected. Home appliances, food, industrial equipment, pets, pharmaceutical products, pallets, cars, luggage, packaged goods, athletic equipment, even clothing will be streaming data. Some data will provide important information about how to run our businesses and lead healthier lives. Much of it will be extraneous. How does a CEO cope with this unimaginable volume and velocity of data, much less harness it to excite and delight customers? Here are three things CEOs must do to tackle this challenge: 1) Take care of your employees, take care of your customers. Larry Ellison recently noted that the two most important priorities for any CEO today revolve around people: Taking care of your employees and taking care of your customers. Companies in today’s hypercompetitive business environment simply won’t be able to survive unless they’ve got world-class people at all levels of the organization. CEOs must demonstrate a commitment to employees by becoming champions for HR systems that empower every employee to fully understand his or her job, how it ties into the corporate framework, what’s expected of them, what training is available, and how they can use an embedded social network to communicate, collaborate and excel. Over the next several years, many of the world’s top industrialized economies will see a turnover in the workforce on an unprecedented scale. Across the United States, Europe, China and Japan, the “baby boomer” generation will be retiring and, by 2020, we’ll see turnovers in those regions ranging from 10 to 30 percent. How will companies replace all that brainpower, experience and know-how? How will CEOs perpetuate the best elements of their corporate cultures in the midst of this profound turnover? The challenge will be daunting, but it can be met with world-class HR technology. As companies begin replacing up to 30 percent of their workforce, they will need thousands of new types of data-native workers to exploit the Internet of Things in the service of the Internet of People. The shift in corporate mindset here can’t be overstated. The CEO has to be at the forefront of this new way of recruiting, training, motivating, aligning and developing truly 21-century talent. 2) Start thinking today about the Internet of People. Some forward-looking companies have begun pursuing the “democratization of data.” This allows more people within a company greater access to data that can help them make better decisions, move more quickly and keep pace with the changing interests and demands of their customers. As a result, we’ve seen organizations flatten out, growing numbers of well-informed people authorized to make decisions without corporate approval and a movement of engagement away from headquarters to the point of contact with the customer. These are profound changes, and I’m a huge proponent. As I think about what the next few years will bring as companies become deluged with unprecedented streams of data, I’m convinced that we’ll need dramatically different organizational structures, decision-making models, risk-management profiles and reward systems. For example, if a car company’s marketing department mines incoming data to determine that customers are shifting rapidly toward neon-green models, how many layers of approval, review, analysis and sign-off will be needed before the factory starts cranking out more neon-green cars? Will we continue to have organizations where too many people are empowered to say “No” and too few are allowed to say “Yes”? If so, how will those companies be able to compete in a world in which customers have more choices, instant access to more information and less loyalty than ever before? That’s why I think CEOs need to begin thinking about this problem right now, not in a year or two when competitors are already reshaping their organizations to match the marketplace’s new realities. 3) Partner with universities to help create a new type of highly skilled workers. Several years ago, universities introduced new undergraduate as well as graduate-level programs in analytics and informatics as the business need for deeper insights into the booming world of data began to explode. Today, as the growth rate of data continues to soar, we know that the Internet of Things will only intensify that growth. Moreover, as Big Data fuels insights that can be shaped into products and services that generate revenue, the demand for data scientists and data specialists will go on unabated. Beyond that top-level expertise, companies are going to need data-native thinkers at all levels of the organization. Where will this new type of worker come from? I think it’s incumbent on the business community to collaborate with universities to develop new curricula designed to turn out graduates who can capitalize on the data-driven world that the Internet of Things is surely going to create. These new workers will create opportunities to help their companies in fields as diverse as product design, customer service, marketing, manufacturing and distribution. They will become innovative leaders in fashioning an entirely new type of workforce and organizational structure optimized to fully exploit the Internet of Things so that it becomes a high-value enabler of the Internet of People. Mark Hurd is President of Oracle Corporation and a member of the company's Board of Directors. He joined Oracle in 2010, bringing more than 30 years of technology industry leadership, computer hardware expertise, and executive management experience to his role with the company. As President, Mr. Hurd oversees the corporate direction and strategy for Oracle's global field operations, including marketing, sales, consulting, alliances and channels, and support. He focuses on strategy, leadership, innovation, and customers.

    Read the article

  • The SPARC SuperCluster

    - by Karoly Vegh
    Oracle has been providing a lead in the Engineered Systems business for quite a while now, in accordance with the motto "Hardware and Software Engineered to Work Together." Indeed it is hard to find a better definition of these systems.  Allow me to summarize the idea. It is:  Build a compute platform optimized to run your technologies Develop application aware, intelligently caching storage components Take an impressively fast network technology interconnecting it with the compute nodes Tune the application to scale with the nodes to yet unseen performance Reduce the amount of data moving via compression Provide this all in a pre-integrated single product with a single-pane management interface All these ideas have been around in IT for quite some time now. The real Oracle advantage is adding the last one to put these all together. Oracle has built quite a portfolio of Engineered Systems, to run its technologies - and run those like they never ran before. In this post I'll focus on one of them that serves as a consolidation demigod, a multi-purpose engineered system.  As you probably have guessed, I am talking about the SPARC SuperCluster. It has many great features inherited from its predecessors, and it adds several new ones. Allow me to pick out and elaborate about some of the most interesting ones from a technological point of view.  I. It is the SPARC SuperCluster T4-4. That is, as compute nodes, it includes SPARC T4-4 servers that we learned to appreciate and respect for their features: The SPARC T4 CPUs: Each CPU has 8 cores, each core runs 8 threads. The SPARC T4-4 servers have 4 sockets. That is, a single compute node can in parallel, simultaneously  execute 256 threads. Now, a full-rack SPARC SuperCluster has 4 of these servers on board. Remember the keyword demigod.  While retaining the forerunner SPARC T3's exceptional throughput, the SPARC T4 CPUs raise the bar with single performance too - a humble 5x better one than their ancestors.  actually, the SPARC T4 CPU cores run in both single-threaded and multi-threaded mode, and switch between these two on-the-fly, fulfilling not only single-threaded OR multi-threaded applications' needs, but even mixed requirements (like in database workloads!). Data security, anyone? Every SPARC T4 CPU core has a built-in encryption engine, that is, encryption algorithms cast into silicon.  A PCI controller right on the chip for customers who need I/O performance.  Built-in, no-cost Virtualization:  Oracle VM for SPARC (the former LDoms or Logical Domains) is not a server-emulation virtualization technology but rather a serverpartitioning one, the hypervisor runs in the server firmware, and all the VMs' HW resources (I/O, CPU, memory) are accessed natively, without performance overhead.  This enables customers to run a number of Solaris 10 and Solaris 11 VMs separated, independent of each other within a physical server II. For Database performance, it includes Exadata Storage Cells - one of the main reasons why the Exadata Database Machine performs at diabolic speed. What makes them important? They provide DB backend storage for your Oracle Databases to run on the SPARC SuperCluster, that is what they are built and tuned for DB performance.  These storage cells are SQL-aware.  That is, if a SPARC T4 database compute node executes a query, it doesn't simply request tons of raw datablocks from the storage, filters the received data, and throws away most of it where the statement doesn't apply, but provides the SQL query to the storage node too. The storage cell software speaks SQL, that is, it is able to prefilter and through that transfer only the relevant data. With this, the traffic between database nodes and storage cells is reduced immensely. Less I/O is a good thing - as they say, all the CPUs of the world do one thing just as fast as any other - and that is waiting for I/O.  They don't only pre-filter, but also provide data preprocessing features - e.g. if a DB-node requests an aggregate of data, they can calculate it, and handover only the results, not the whole set. Again, less data to transfer.  They support the magical HCC, (Hybrid Columnar Compression). That is, data can be stored in a precompressed form on the storage. Less data to transfer.  Of course one can't simply rely on disks for performance, there is Flash Storage included there for caching.  III. The low latency, high-speed backbone network: InfiniBand, that interconnects all the members with: Real High Speed: 40 Gbit/s. Full Duplex, of course. Oh, and a really low latency.  RDMA. Remote Direct Memory Access. This technology allows the DB nodes to do exactly that. Remotely, directly placing SQL commands into the Memory of the storage cells. Dodging all the network-stack bottlenecks, avoiding overhead, placing requests directly into the process queue.  You can also run IP over InfiniBand if you please - that's the way the compute nodes can communicate with each other.  IV. Including a general-purpose storage too: the ZFSSA, which is a unified storage, providing NAS and SAN access too, with the following features:  NFS over RDMA over InfiniBand. Nothing is faster network-filesystem-wise.  All the ZFS features onboard, hybrid storage pools, compression, deduplication, snapshot, replication, NFS and CIFS shares Storageheads in a HA-Cluster configuration providing availability of the data  DTrace Live Analytics in a web-based Administration UI Being a general purpose application data storage for your non-database applications running on the SPARC SuperCluster over whichever protocol they prefer, easily replicating, snapshotting, cloning data for them.  There's a lot of great technology included in Oracle's SPARC SuperCluster, we have talked its interior through. As for external scalability: you can start with a half- of full- rack SPARC SuperCluster, and scale out to several racks - that is, stacking not separate full-rack SPARC SuperClusters, but extending always one large instance of the size of several full-racks. Yes, over InfiniBand network. Add racks as you grow.  What technologies shall run on it? SPARC SuperCluster is a general purpose scaleout consolidation/cloud environment. You can run Oracle Databases with RAC scaling, or Oracle Weblogic (end enjoy the SPARC T4's advantages to run Java). Remember, Oracle technologies have been integrated with the Oracle Engineered Systems - this is the Oracle on Oracle advantage. But you can run other software environments such as SAP if you please too. Run any application that runs on Oracle Solaris 10 or Solaris 11. Separate them in Virtual Machines, or even Oracle Solaris Zones, monitor and manage those from a central UI. Here the key takeaways once again: The SPARC SuperCluster: Is a pre-integrated Engineered System Contains SPARC T4-4 servers with built-in virtualization, cryptography, dynamic threading Contains the Exadata storage cells that intelligently offload the burden of the DB-nodes  Contains a highly available ZFS Storage Appliance, that provides SAN/NAS storage in a unified way Combines all these elements over a high-speed, low-latency backbone network implemented with InfiniBand Can grow from a single half-rack to several full-rack size Supports the consolidation of hundreds of applications To summarize: All these technologies are great by themselves, but the real value is like in every other Oracle Engineered System: Integration. All these technologies are tuned to perform together. Together they are way more than the sum of all - and a careful and actually very time consuming integration process is necessary to orchestrate all these for performance. The SPARC SuperCluster's goal is to enable infrastructure operations and offer a pre-integrated solution that can be architected and delivered in hours instead of months of evaluations and tests. The tedious and most importantly time and resource consuming part of the work - testing and evaluating - has been done.  Now go, provide services.   -- charlie  

    Read the article

  • Disk Drive not working

    - by user287681
    The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

    Read the article

  • Merge replication stopping without errors in SQL 2008 R2

    - by Rob Farley
    A non-SQL MVP friend of mine, who also happens to be a client, asked me for some help again last week. I was planning on writing this up even before Rob Volk (@sql_r) listed his T-SQL Tuesday topic for this month. Earlier in the year, I (well, LobsterPot Solutions, although I’d been the person mostly involved) had helped out with a merge replication problem. The Merge Agent on the subscriber was just stopping every time, shortly after it started. With no errors anywhere – not in the Windows Event Log, the SQL Agent logs, not anywhere. We’d managed to get the system working again, but didn’t have a good reason about what had happened, and last week, the problem occurred again. I asked him about writing up the experience in a blog post, largely because of the red herrings that we encountered. It was an interesting experience for me, also because I didn’t end up touching my computer the whole time – just tapping on my phone via Twitter and Live Msgr. You see, the thing with replication is that a useful troubleshooting option is to reinitialise the thing. We’d done that last time, and it had started to work again – eventually. I say eventually, because the link being used between the sites is relatively slow, and it took a long while for the initialisation to finish. Meanwhile, we’d been doing some investigation into what the problem could be, and were suitably pleased when the problem disappeared. So I got a message saying that a replication problem had occurred again. Reinitialising wasn’t going to be an option this time either. In this scenario, the subscriber having the problem happened to be in a different domain to the publisher. The other subscribers (within the domain) were fine, just this one in a different domain had the problem. Part of the problem seemed to be a log file that wasn’t being backed up properly. They’d been trying to back up to a backup device that had a corruption, and the log file was growing. Turned out, this wasn’t related to the problem, but of course, any time you’re troubleshooting and you see something untoward, you wonder. Having got past that problem, my next thought was that perhaps there was a problem with the account being used. But the other subscribers were using the same account, without any problems. The client pointed out that that it was almost exactly six months since the last failure (later shown to be a complete red herring). It sounded like something might’ve expired. Checking through certificates and trusts showed no sign of anything, and besides, there wasn’t a problem running a command-prompt window using the account in question, from the subscriber box. ...except that when he ran the sqlcmd –E –S servername command I recommended, it failed with a Named Pipes error. I’ve seen problems with firewalls rejecting connections via Named Pipes but letting TCP/IP through, so I got him to look into SQL Configuration Manager to see what kind of connection was being preferred... Everything seemed fine. And strangely, he could connect via Management Studio. Turned out, he had a typo in the servername of the sqlcmd command. That particular red herring must’ve been reflected in his cheeks as he told me. During the time, I also pinged a friend of mine to find out who I should ask, and Ted Kruger (@onpnt) ‘s name came up. Ted (and thanks again, Ted – really) reconfirmed some of my thoughts around the idea of an account expiring, and also suggesting bumping up the logging to level 4 (2 is Verbose, 4 is undocumented ridiculousness). I’d just told the client to push the logging up to level 2, but the log file wasn’t appearing. Checking permissions showed that the user did have permission on the folder, but still no file was appearing. Then it was noticed that the user had been switched earlier as part of the troubleshooting, and switching it back to the real user caused the log file to appear. Still no errors. A lot more information being pushed out, but still no errors. Ted suggested making sure the FQDNs were okay from both ends, in case the servers were unable to talk to each other. DNS problems can lead to hassles which can stop replication from working. No luck there either – it was all working fine. Another server started to report a problem as well. These two boxes were both SQL 2008 R2 (SP1), while the others, still working, were SQL 2005. Around this time, the client tried an idea that I’d shown him a few years ago – using a Profiler trace to see what was being called on the servers. It turned out that the last call being made on the publisher was sp_MSenumschemachange. A quick interwebs search on that showed a problem that exists in SQL Server 2008 R2, when stored procedures have more than 4000 characters. Running that stored procedure (with the same parameters) manually on SQL 2005 listed three stored procedures, the first of which did indeed have more than 4000 characters. Still no error though, and the problem as listed at http://support.microsoft.com/kb/2539378 describes an error that should occur in the Event log. However, this problem is the type of thing that is fixed by a reinitialisation (because it doesn’t need to send the procedure change across as a transaction). And a look in the change history of the long stored procs (you all keep them, right?), showed that the problem from six months earlier could well have been down to this too. Applying SP2 (with sufficient paranoia about backups and how to get back out again if necessary) fixed the problem. The stored proc changes went through immediately after the service pack was applied, and it’s been running happily since. The funny thing is that I didn’t solve the problem. He had put the Profiler trace on the server, and had done the search that found a forum post pointing at this particular problem. I’d asked Ted too, and although he’d given some useful information, nothing that he’d come up with had actually been the solution either. Sometimes, asking for help is the most useful thing you can do. Often though, you don’t end up getting the help from the person you asked – the sounding board is actually what you need. @rob_farley

    Read the article

  • Refactoring Part 1 : Intuitive Investments

    - by Wes McClure
    Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

    Read the article

  • DevConnections Spring 2010 Speaker Evals and Tips

    As a conference speaker, I always look forward to hearing from attendees whether they felt my sessions were valuable and worth their time.  Its always gratifying  get a high score, but of course its the (preferably constructive) criticism thats key to continued improvement.  Im by no means the best technical presenter around, and Im always looking for ways to improve. Ive recently spoken at a few events, including TechEd and an Ohio event called Stir Trek.  DevConnections was actually back in April, but theyre just getting their final evals out to speakers.  TechEd, of course, does online evals so immediately after your talks you can see what people think.  Ill try and post my TechEd evals in the next week or so. I gave 3 talks at DevConnections Spring 2010 / VS2010 Launch which I discussed in this previous blog post.  In this follow-up, Im just going to share some eval info and my thoughts on it, albeit a couple of months later. Pragmatic ASP.NET Tips, Tricks, and Tools Evals Turned In: 27 Overall Eval: 3.74 Average Score: 3.47 89% found the technical level Just Right.  7.4% thought it was too basic (3.6% did not respond).  Since nobody thought the content was Too complex, I could perhaps have added some more complex material, but having about 90% say its Just Right is pretty good. 92% said at least 50% of the material was new to them.  36% said 75% or more was new.  Thats also pretty good, I think. 77.8% can use the information immediately; 15% can use it within 2-6 months (7.2 % no response). Overall 78% rated the session Excellent, 18% Good, 4% Fair. All comments (9): Steve did a great job Excellent session! It was good. Im now super excited to attend Steves other sessions later today.  Very useful. One of the best speakers here.  Bring him back to future conferences please. Continue to have this session with new and old stuff.  I always find something I did not know about. Excellent!  This was the best session Ive seen all week. Did not increase font on all pages could not see. For Steve to have had more sessions. Note to self make the fonts bigger across the board.  Otherwise, this is all good for my ego. :)  This is always a very popular session and one I really enjoy giving.  Tips and Tricks talks are pretty easy because you dont have to go in depth with any particular thing, and theyre almost always with existing technology so youre not dealing with betas, lack of documentation, and other issues.  Its an easy session to do well, in my experience, and one which I think attendees definitely appreciate.   Whats New in ASP.NET MVC 2 Evals Turned In: 23 Overall Eval: 3.77 Average Score: 3.47 (wow, I cant believe I scored better on this talk than the tips and tricks talk, which Ive given many times and was more excited about) 96% found the technical level Just Right.  90% found 50% or more of the material to be new.  43% can use the info immediately, and another 43% can use it within 2-6 months I guess that speaks to adoption rates of MVC 2 among my attendees Overall 74% said the session was Excellent, 22% Good.  4% No Response. All Comments (6): Great job, thank you. Great speaker! Really good, a little lost in the code at some points, but great information. Speaker needs to repeat questions from audience for everyone to hear. Exceeded my expectations. Great speaker, very informative. I really do try to religiously repeat questions from the audience for everyone to hear, but obviously I didnt do it 100% of the time.  Note to self remember to repeat questions.  That and making fonts big are really basic speaker best practices, which just goes to prove that fundamentals are always something that can be perfected.   SOLIDify Your ASP.NET MVC 2 Application Evals Turned In: 8 (!) Overall Eval: 3.63 Average Score: 3.47 As I recall this was one of the last talks of the day / show, which might account for the low number of evals turned in.  I dont recall speaking to an empty room for this talk, although it certainly wasnt as crowded as the tips and tricks talk. 100% found the technical level Just Right.  100% found at least half the material new.  62.5% can use it at once and 37.5% within 2-6 months.  62.5% rated the session Excellent overall; 37.5% Good.  Im thinking there were 5 evals with all 4s checked and 3 with all 3s checked (4 = Excellent, 3 = Good) All Comments (3): This covered many topics Ive read about recently, and it helped reinforce them. It was a nice overview of the solid principle, but I thought there might be specifics for MVC2.  I am glad there is not. Move a little slower. Ok, so another fundamental dont go too fast.  Looks like I got one fundamental tip from the comments of each talk. My Take-Aways Remember the fundamentals.  Its worth going through a checklist prior to presenting to make sure these things are fresh in your mind.  Increase all font sizes.  Repeat all questions from audience members without microphones (this is also a great way to stall for time, btw).  Resist the urge to move too quickly especially if youre nervous or short of time.  Writing this up in a blog post also further reinforces these fundamentals for me, which is one of the main reasons why I do it I retain things better when I write them, and even moreso when I write them for public consumption since I have to really think about what Im saying.  And maybe a few of you find this interesting or helpful, which is a bonus. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Corsair Hackers Reboot

    It wasn't easy for me to attend but it was absolutely worth to go. The Linux User Group of Mauritius (LUGM) organised another get-together for any open source enthusiast here on the island. Strangely named "Corsair Hackers Reboot" but it stands for a positive cause: "Corsair Hackers Reboot Event A collaborative activity involving LUGM, UoM Computer Club, Fortune Way Shopping Mall and several geeks from around the island, striving to put FOSS into homes & offices. The public is invited to discover and explore Free Software & Open Source." And it was a good opportunity for me and the kids to visit the east coast of Mauritius, too. Perfect timing It couldn't have been better... Why? Well, for two important reasons (in terms of IT): End of support for Microsoft Windows XP - 08.04.2014 Release of Ubuntu 14.04 Long Term Support - 17.04.2014 Quite funnily, those two IT dates weren't the initial reasons and only during the weeks of preparations we put those together. And therefore it was even more positive to promote the use of Linux and open source software in general to a broader audience. Getting there ... Thanks to the new motor way M3 and all the additional road work which has been completed recently it was very simple to get across the island in a very quick and relaxed manner. Compared to my trips in the early days of living in Mauritius (and riding on a scooter) it was very smooth and within less than an hour we hit Centrale de Flacq. Well, being in the city doesn't necessarily mean that one has arrived at the destination. But thanks to modern technology I had a quick look on Google Maps, and we finally managed to get a parking behind the huge bus terminal in Flacq. From there it was just a short walk to Fortune Way. The children were trying to count the number of buses... Well, lots and lots of buses - really impressive actually. What was presented? There were different areas set up. Right at the entrance one's attention was directly drawn towards the elevated hacker's stage. Similar to rock stars performing their gig there was bunch of computers, laptops and networking equipment in order to cater the right working conditions for coding/programming challenge(s) on the one hand and for the pen-testing or system hacking competition on the other hand. Personally, I was very impresses that actually Nitin took care of the pen-testing competition. He hardly started one year back with Linux in general, and Kali Linux specifically. Seeing his personal development from absolute newbie to a decent Linux system administrator within such a short period of time, is really impressive. His passion to open source software made him a living. Next, clock-wise seen, was the Kid's Corner with face-painting as the main attraction. Additionally, there were numerous paper print outs to colour. Plus a decent workstation with the educational suite GCompris. Of course, my little ones were into that. They already know GCompris since a while as they are allowed to use it on an IGEL thin client terminal here at home. To simplify my life, I set up GCompris as full-screen guest session on the server, and they can pass the login screen without any further obstacles. And because it's a thin client hooked up to a XDMCP remote session I don't have to worry about the hardware on their desk, too. The next section was the main attraction of the event: BYOD - Bring Your Own Device Well, compared to the usual context of BYOD the corsairs had a completely different intention. Here, you could bring your own laptop and a team of knowledgeable experts - read: geeks and so on - offered to fully convert your system on any Linux distribution of your choice. And even though I came later, I was told that the USB pen drives had been in permanent use. From being prepared via dd command over launching LiveCD session to finally installing a fresh Linux system on bare metal. Most interestingly, I did a similar job already a couple of months ago, while upgrading an existing Windows XP system to Xubuntu 13.10. So far, the female owner is very happy and enjoys her system almost every evening to go shopping online, checking mails, and reading latest news from the Anime world. Back to the Hackers event, Ish told me that they managed approximately 20 conversion during the day. Furthermore, Ajay and others gladly assisted some visitors with some tricky issues and by the end of the day you can call is a success. While I was around, there was a elderly male visitor that got a full-fledged system conversion to a Linux system running completely in French language. A little bit more to the centre it was Yasir's turn to demonstrate his Arduino hardware that he hooked up with an experimental electrical circuit board connected to an LCD matrix display. That's the real spirit of hacking, and he showed some minor adjustments on the fly while demo'ing the system. Also, very interesting there was a thermal sensor around. Personally, I think that platforms like the Arduino as well as the Raspberry Pi have a great potential at a very affordable price in order to bring a better understanding of electronics as well as computer programming to a broader audience. It would be great to see more of those experiments during future activities. And last but not least there were a small number of vendors. Amongst them was Emtel - once again as sponsor of the general internet connectivity - and another hardware supplier from Riche Terre shopping mall. They had a good collection of Android related gimmicks, like a autonomous web cam that can convert any TV with HDMI connector into an online video chat system given WiFi. It's actually kind of awesome to have a Skype or Google hangout video session on the big screen rather than on the laptop. Some pictures of the event LUGM: Great conversations on Linux, open source and free software during the Corsair Hackers Reboot LUGM: Educational workstation running GCompris suite attracted the youngest attendees of the day. Of course, face painting had to be done prior to hacking... LUGM: Nadim demoing some Linux specifics to interested visitors. Everyone was pretty busy during the whole day LUGM: The hacking competition, here pen-testing a wireless connection and access point between multiple machines LUGM: Well prepared workstations to be able to 'upgrade' visitors' machines to any Linux operating system Final thoughts Gratefully, during the preparations of the event I was invited to leave some comments or suggestions, and the team of the LUGM did a great job. The outdoor banner was a eye-catcher, the various flyers and posters for the event were clearly written and as far as I understood from the quick chats I had with Ish, Nadim, Nitin, Ajay, and of course others all were very happy about the event execution. Great job, LUGM! And I'm already looking forward to the next Corsair Hackers Reboot event ... Crossing fingers: Very soon and hopefully this year again :) Update: In the media The event had been announced in local media, too. L'Express: Salon informatique: Hacking Challenge à Flacq

    Read the article

  • Goodbye my beloved Nexus One, hello Windows Phone 7

    - by George Clingerman
    Last night my wife’s Nexus One finally bit the dust. You may not know but I’ve been nursing her Nexus One one along for quite a while after her screen shattered. I was able to replace it on my own (go me!) but little quirks have been popping up and the phone was quickly deteriorating. Lately it’s been the power button. Wifey would often have to press the power button several times to get her phone to turn on and last night it just wouldn’t wake up again. I took it apart and tried my best to see if I could somehow make it live once again but no luck this time. It was finally ready to retire. We looked at first for a replacement phone for her but she wasn’t really seeing anything she liked. So I decided to make the ultimate sacrifice and offer up my much loved Nexus One and I would then get a new Windows Phone 7 device. I love T-Mobile for my service so my choices were immediately limited to basically just a single phone. The HTC HD7. I read reviews and they were all over the board from people loving to people hating the phone but I decided, hey, why not, let’s take this plunge. And I did. I’ve only had the phone for about two days now so below is my list of first reaction pros/cons. These are basically things I’ve missed or things I’ve noticed that I really like about my new Windows Phone. Cons: * No Google Talk – I used this a LOT on my Nexus. I’ve found an application called “Flory” but it’s just an ok substitute, not the same as the full featured GTalk I had on my Nexus. * Seesmic is limited– I loved the way Seesmic worked on my Nexus. It was my mobile twitter client of choice. Everything about it worked really well. On Windows Phone 7 it’s just ok. I don’t get notification of new tweets, it’s several clicks to even see a new tweet. It’s definitely got some more development before it has the same features as it did on my Nexus. * Buttons don’t give great feedback – I’d read this on the reviews about the HTC HD7 and I’m finding it true myself. Pressing the buttons on the side of the phone and the power button on the top is finicky and I have to be looking at my phone to make sure I actually got them to press. * Web browsing is slow – I’m not sure what’s up with this, I’m connected to my wireless network at my house but it’s noticeably slower on my WP7 device than my Nexus. I even switched back to verify and it’s definitely true. Retrieving tweets, hitting up the XNA forums and just general web activities are all much slower on my WP7. I can’t think of any reason this would be true but it almost seems like it’s not using my wireless for everything.   Pros: * It’s pretty – the phone is really gorgeous. I loved the form of my Nexus One by the HTC HD7 is just as pretty, maybe even prettier! It’s got a nice large, bright screen. It feels good in my hand. And it even has a little kickstand to set the phone up for movie watching. Definitely a gorgeous phone. * LIVE integration – I lost a lot of nice integration with Google services but I gained a lot of integration with LIVE services that I also use. Now I can see when I get new GMail messages AND Hotmail messages. And having the Xbox LIVE integration is admittedly cool as well. * Tile notification rock – The Windows Phone 7 commercials are TRYING to get this message out but they’re doing a really poor job of this. Tile notifications really do save you from your phone. I have a whole little mini-informational dashboard at a glance. I unlock my phone and at a glace I can see new IMs, new mail messages, software updates etc. All just letting me know in the tiles I have arranged. That’s pretty cool. * The interface works really well – I feel super hip and cool swiping and sliding things around on my Windows Phone 7. Everything works that way and it’s great and fast and really good looking. I’m all about me feeling cool. * I’m gaming more – I had gotten a few games on my Nexus One but there really weren’t a lot of good developers flocking to the service. Just browsing through the Windows Phone 7 marketplace I’m already seeing a ton of games I want to try and buy. And I sat down and bet Pixel Man 0 just yesterday on my phone. I’m already gaming more than I did on my Nexus One. * Netflix integration is fantastic - It works just like it does on my Xbox 360 and I love having this feature on my phone. * It’s basically a Zune – I’ve been taking my Zune to work and listening to music off of that while I code. I no longer need to take it with me, now I just sync songs onto my phone and it’s my new Zune. I freaking love that. One less device to carry around.   All in all my cons have really little to do with the phone (just the buttons and the web browsing) and more to do with the applications needing to catch up a bit to what I’m used to. And the Pros are things that ARE phone specific so I’m seeing that as a good sign that I’m going to be very happy with my Windows Phone 7. So Wifey is happy having her Nexus One again, I’m happy with my new Windows Phone 7. Life is good. Now I just need to make a game to pay for it….

    Read the article

  • Kubuntu 12.04 - Touchpad and keyboard stopped working at random

    - by StepTNT
    As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

    Read the article

  • Partner Blog Series: PwC Perspectives Part 2 - Jumpstarting your IAM program with R2

    - by Tanu Sood
    Identity and access management (IAM) isn’t a new concept. Over the past decade, companies have begun to address identity management through a variety of solutions that have primarily focused on provisioning. . The new age workforce is converging at a rapid pace with ever increasing demand to use diverse portfolio of applications and systems to interact and interface with their peers in the industry and customers alike. Oracle has taken a significant leap with their release of Identity and Access Management 11gR2 towards enabling this global workforce to conduct their business in a secure, efficient and effective manner. As companies deal with IAM business drivers, it becomes immediately apparent that holistic, rather than piecemeal, approaches better address their needs. When planning an enterprise-wide IAM solution, the first step is to create a common framework that serves as the foundation on which to build the cost, compliance and business process efficiencies. As a leading industry practice, IAM should be established on a foundation of accurate data for identity management, making this data available in a uniform manner to downstream applications and processes. Mature organizations are looking beyond IAM’s basic benefits to harness more advanced capabilities in user lifecycle management. For any organization looking to embark on an IAM initiative, consider the following use cases in managing and administering user access. Expanding the Enterprise Provisioning Footprint Almost all organizations have some helpdesk resources tied up in handling access requests from users, a distraction from their core job of handling problem tickets. This dependency has mushroomed from the traditional acceptance of provisioning solutions integrating and addressing only a portion of applications in the heterogeneous landscape Oracle Identity Manager (OIM) 11gR2 solves this problem by offering integration with third party ticketing systems as “disconnected applications”. It allows for the existing business processes to be seamlessly integrated into the system and tracked throughout its lifecycle. With minimal effort and analysis, an organization can begin integrating OIM with groups or applications that are involved with manually intensive access provisioning and de-provisioning activities. This aspect of OIM allows organizations to on-board applications and associated business processes quickly using out of box templates and frameworks. This is especially important for organizations looking to fold in users and resources from mergers and acquisitions. Simplifying Access Requests Organizations looking to implement access request solutions often find it challenging to get their users to accept and adopt the new processes.. So, how do we improve the user experience, make it intuitive and personalized and yet simplify the user access process? With R2, OIM helps organizations alleviate the challenge by placing the most used functionality front and centre in the new user request interface. Roles, application accounts, and entitlements can all be found in the same interface as catalog items, giving business users a single location to go to whenever they need to initiate, approve or track a request. Furthermore, if a particular item is not relevant to a user’s job function or area inside the organization, it can be hidden so as to not overwhelm or confuse the user with superfluous options. The ability to customize the user interface to suit your needs helps in exercising the business rules effectively and avoiding access proliferation within the organization. Saving Time with Templates A typical use case that is most beneficial to business users is flexibility to place, edit, and withdraw requests based on changing circumstances and business needs. With OIM R2, multiple catalog items can now be added and removed from the shopping cart, an ecommerce paradigm that many users are already familiar with. This feature can be especially useful when setting up a large number of new employees or granting existing department or group access to a newly integrated application. Additionally, users can create their own shopping cart templates in order to complete subsequent requests more quickly. This feature saves the user from having to search for and select items all over again if a request is similar to a previous one. Advanced Delegated Administration A key feature of any provisioning solution should be to empower each business unit in managing their own access requests. By bringing administration closer to the user, you improve user productivity, enable efficiency and alleviate the administration overhead. To do so requires a federated services model so that the business units capable of shouldering the onus of user life cycle management of their business users can be enabled to do so. OIM 11gR2 offers advanced administrative options for creating, managing and controlling business logic and workflows through easy to use administrative interface and tools that can be exposed to delegated business administrators. For example, these business administrators can establish or modify how certain requests and operations should be handled within their business unit based on a number of attributes ranging from the type of request or the risk level of the individual items requested. Closed-Loop Remediation Security continues to be a major concern for most organizations. Identity management solutions bolster security by ensuring only the right users have the right access to the right resources. To prevent unauthorized access and where it already exists, the ability to detect and remediate it, are key requirements of an enterprise-grade proven solution. But the challenge with most solutions today is that some of this information still exists in silos. And when changes are made to systems directly, not all information is captured. With R2, oracle is offering a comprehensive Identity Governance solution that our customer organizations are leveraging for closed loop remediation that allows for an automated way for administrators to revoke unauthorized access. The change is automatically captured and the action noted for continued management. Conclusion While implementing provisioning solutions, it is important to keep the near term and the long term goals in mind. The provisioning solution should always be a part of a larger security and identity management program but with the ability to seamlessly integrate not only with the company’s infrastructure but also have the ability to leverage the information, business models compiled and used by the other identity management solutions. This allows organizations to reduce the cost of ownership, close security gaps and leverage the existing infrastructure. And having done so a multiple clients’ sites, this is the approach we recommend. In our next post, we will take a journey through our experiences of advising clients looking to upgrade to R2 from a previous version or migrating from a different solution. Meet the Writers:   Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

    Read the article

  • Calculated Fields - Idiosyncracies

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula:  IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula:  IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula:  IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula  =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own!  That’s all folks?! (and this time I mean it)

    Read the article

  • Delight and Excite

    - by Applications User Experience
    Mick McGee, CEO & President, EchoUser Editor’s Note: EchoUser is a User Experience design firm in San Francisco and a member of the Oracle Usability Advisory Board. Mick and his staff regularly consult on Oracle Applications UX projects. Being part of a user experience design firm, we have the luxury of working with a lot of great people across many great companies. We get to help people solve their problems.  At least we used to. The basic design challenge is still the same; however, the goal is not necessarily to solve “problems” anymore; it is, “I want our products to delight and excite!” The question for us as UX professionals is how to design to those goals, and then how to assess them from a usability perspective. I’m not sure where I first heard “delight and excite” (A book? blog post? Facebook  status? Steve Jobs quote?), but now I hear these listed as user experience goals all the time. In particular, somewhat paradoxically, I routinely hear them in enterprise software conversations. And when asking these same enterprise companies what will make the project successful, we very often hear, “Make it like Apple.” In past days, it was “make it like Yahoo (or Amazon or Google“) but now Apple is the common benchmark. Steve Jobs and Apple were not secrets, but with Jobs’ passing and Apple becoming the world’s most valuable company in the last year, the impact of great design and experience is suddenly very widespread. In particular, users’ expectations have gone way up. Being an enterprise company is no shield to the general expectations that users now have, for all products. Designing a “Minimum Viable Product” The user experience challenge has historically been, to echo the words of Eric Ries (author of Lean Startup) , to create a “minimum viable product”: the proverbial, “make it good enough”. But, in our profession, the “minimum viable” part of that phrase has oftentimes, unfortunately, referred to the design and user experience. Technology typically dominated the focus of the biggest, most successful companies. Few have had the laser focus of Apple to also create and sell design and user experience alongside great technology. But now that Apple is the most valuable company in the world, copying their success is a common undertaking. Great design is now a premium offering that everyone wants, from the one-person startup to the largest companies, consumer and enterprise. This emerging business paradigm will have significant impact across the user experience design process and profession. One area that particularly interests me is, how are we going to evaluate these new emerging “delight and excite” experiences, which are further customized to each particular domain? How to Measure “Delight and Excite” Traditional usability measures of task completion rate, assists, time, and errors are still extremely useful in many situations; however, they are too blunt to offer much insight into emerging experiences “Satisfaction” is usually assessed in user testing, in roughly equivalent importance to the above objective metrics. Various surveys and scales have provided ways to measure satisfying UX, with whatever questions they include. However, to meet the demands of new business goals and keep users at the center of design and development processes, we have to explore new methods to better capture custom-experience goals and emotion-driven user responses. We have had success assessing custom experiences, including “delight and excite”, by employing a variety of user testing methods that tend to combine formative and summative techniques (formative being focused more on identifying usability issues and ways to improve design, and summative focused more on metrics). Our most successful tool has been one we’ve been using for a long time, Magnitude Estimation Technique (MET). But it’s not necessarily about MET as a measure, rather how it is created. Caption: For one client, EchoUser did two rounds of testing.  Each test was a mix of performing representative tasks and gathering qualitative impressions. Each user participated in an in-person moderated 1-on-1 session for 1 hour, using a testing set-up where they held the phone. The primary goal was to identify usability issues and recommend design improvements. MET is based on a definition of the desired experience, which users will then use to rate items of interest (usually tasks in a usability test). In other words, a custom experience definition needs to be created. This can then be used to measure satisfaction in accomplishing tasks; “delight and excite”; or anything else from strategic goals, user demands, or elsewhere. For reference, our standard MET definition in usability testing is: “User experience is your perception of how easy to use, well designed and productive an interface is to complete tasks.” Articulating the User Experience We’ve helped construct experience definitions for several clients to better match their business goals. One example is a modification of the above that was needed for a company that makes medical-related products: “User experience is your perception of how easy to use, well-designed, productive and safe an interface is for conducting tasks. ‘Safe’ is how free an environment (including devices, software, facilities, people, etc.) is from danger, risk, and injury.” Another example is from a company that is pushing hard to incorporate “delight” into their enterprise business line: “User experience is your perception of a product’s ease of use and learning, satisfaction and delight in design, and ability to accomplish objectives.” I find the last one particularly compelling in that there is little that identifies the experience as being for a highly technical enterprise application. That definition could easily be applied to any number of consumer products. We have gone further than the above, including “sexy” and “cool” where decision-makers insisted they were part of the desired experience. We also applied it to completely different experiences where the “interface” was, for example, riding public transit, the “tasks” were train rides, and we followed the participants through the train-riding journey and rated various aspects accordingly: “A good public transportation experience is a cost-effective way of reliably, conveniently, and safely getting me to my intended destination on time.” To construct these definitions, we’ve employed both bottom-up and top-down approaches, depending on circumstances. For bottom-up, user inputs help dictate the terms that best fit the desired experience (usually by way of cluster and factor analysis). Top-down depends on strategic, visionary goals expressed by upper management that we then attempt to integrate into product development (e.g., “delight and excite”). We like a combination of both approaches to push the innovation envelope, but still be mindful of current user concerns. Hopefully the idea of crafting your own custom experience, and a way to measure it, can provide you with some ideas how you can adapt your user experience needs to whatever company you are in. Whether product-development or service-oriented, nearly every company is ultimately providing a user experience. The Bottom Line Creating great experiences may have been popularized by Steve Jobs and Apple, but I’ll be honest, it’s a good feeling to be moving from “good enough” to “delight and excite,” despite the challenge that entails. In fact, it’s because of that challenge that we will expand what we do as UX professionals to help deliver and assess those experiences. I’m excited to see how we, Oracle, and the rest of the industry will live up to that challenge.

    Read the article

  • #include file vs iframe or is there a better way

    - by Laurence Burke
    ok simple question about including large mostly static html and asp.net code I am using as of right now #include and I was wondering if iframes would be a better way of handling what I wish to do or is there a better way to do it. here is the current way i'm handling the includes default.aspx <head id="YafHead" runat="server"> <meta id="YafMetaDescription" runat="server" name="description" content="Yet Another Forum.NET -- A bulletin board system written in ASP.NET" /> <meta id="YafMetaKeywords" runat="server" name="keywords" content="Yet Another Forum.net, Forum, ASP.NET, BB, Bulletin Board, opensource" /> <title>Forums</title> <style type="text/css"> .sbutton { background-color:#361800; border:medium none; border-collapse:collapse; color:#FFFFFF; font-family:Tahoma,Arial,Helvetica; font-size:10px; font-weight:bold; vertical-align:middle; } </style> <link href="images/favicon.ico" type="image/ico" rel="shortcut icon" /> <link rel="stylesheet" href="navTopStyle.css" type="text/css" media="screen" /> </head> <body style="margin: 0"> <form id="form1" runat="server" enctype="multipart/form-data"> <table align="center" style="background-color: #ffffff" cellpadding="0" cellspacing="0" width="790px"> <tr> <td> <!--#include file="CComHeader.html"--> </td> </tr> <tr> <td> <YAF:Forum runat="server" ID="forum"></YAF:Forum> </td> </tr> </table> </form> </body> </html> CComHeader.html <table cellpadding="0" cellspacing="0" width="790px"> <tr> <td align="left"> <img src="images/smokechair.jpg" alt="Cigar.com" /><img src="images/cigarcomTitle.gif" alt="Cigar.com" /> </td> <td align="right"> <table width="310px" height="73px" cellpadding="0" cellspacing="0" style="padding-right: 6px"> <tr> <td width="109px" class="welcome" align="left"> Welcome to Cigar.com </td> <td width="195px" class="welcome" align="left"> <div runat="server" id="divUser"> <table cellpadding="0" cellspacing="0" align="right"> <tr> <td width="126px" align="left"> <asp:Label ID="lblUserName" CssClass="welcome" runat="server"></asp:Label></td> <td width="65px" align="left"> <a href="http://www.cigar.com/cs/languages/en-US/docs/faq.aspx">Help</a></td> </tr> </table> </div> <div runat="server" id="divGuest"> <a href="OutsideLogin.aspx">Sign In</a> | <a href="OutsideLogin.aspx">Join</a> | <a href="http://www.cigar.com/cs/languages/en-US/docs/faq.aspx">Help</a> </div> </td> </tr> <tr> <td colspan="2"> <table cellpadding="0" cellspacing="0" > <tr> <td width="234px" align="right"> <asp:DropDownList ID="ddlCriteria" runat="server"> <asp:ListItem>Posts</asp:ListItem> <asp:ListItem>Posted By</asp:ListItem> </asp:DropDownList> <asp:TextBox Width="120px" ID="txtSearch" runat="server"></asp:TextBox> </td> <td width="70px" align="center"> <asp:Button ID="btnSearch" runat="server" Text="Search" CssClass="sbutton" OnClick="btnSearch_Click" /> </td> </tr> </table> </td> </tr> </table> </td> </tr> <tr> <td colspan="2"> <!--#include file="commonTabBar.html" --> </td> </tr> </table> commonTabBar.html <%-- CommonTabBar firebugged from Cigar.com--%> <div class="CommonTabBar"> <script language="javascript"> function tabOver(e) { if (e.className != 'CommonSimpleTabStripSelectedTab') e.className = 'CommonSimpleTabStripTabHover'; } function tabOut(e) { if (e.className != 'CommonSimpleTabStripSelectedTab') e.className = 'CommonSimpleTabStripTab'; } function tabOverSub(e) { if (e.className != 'CommonSimpleTabStripSelectedTabSub') e.className = 'CommonSimpleTabStripTabHoverSub'; } function tabOutSub(e) { if (e.className != 'CommonSimpleTabStripSelectedTabSub') e.className = 'CommonSimpleTabStripTabSub'; } </script> <table border="0" cellpadding="0" cellspacing="0"> <tbody> <tr valign="middle"> <td class="CommonSimpleTabStripTab" style="padding: 0px"> &nbsp; </td> <td class="CommonSimpleTabStripTab" onmouseover="tabOver(this);" onmouseout="tabOut(this);" onclick="window.location = 'http://www.cigar.com/index.asp'"> <a style="float: right; display: block; height: 30px; line-height: 30px; padding-left: 12px; padding-right: 12px; vertical-align: middle;" href="http://www.cigar.com/index.asp"> Home</a> </td> <td class="CommonSimpleTabStripTab" onmouseover="tabOver(this); document.getElementById('ComDropDown2').style.display = 'inline';" onmouseout="tabOut(this); document.getElementById('ComDropDown2').style.display = 'none';"> <a style="float: right; display: block; height: 30px; line-height: 30px; padding-left: 12px; padding-right: 12px; vertical-align: middle;" href="http://www.cigar.com/cigars/index.asp"> Cigars</a> <div id="ComDropDown2" style="border: 1px solid rgb(71, 42, 24); margin: 28px 0px 0px; display: none; background-color: rgb(235, 230, 208); color: rgb(71, 42, 24); position: absolute; float: left; z-index: 200;" onmouseover="document.getElementById('ComDropDown2').style.display = 'inline';" onmouseout="document.getElementById('ComDropDown2').style.display = 'none';"> <ul style="margin: 0px; padding: 0px; width: 100px;"> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/index.asp'"><a href="http://www.cigar.com/cigars/index.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="BrandsLink">Brands </a> </li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/privatelabel.asp?brand=419'"> <a href="http://www.cigar.com/cigars/privatelabel.asp?brand=419" style="line-height: 25px; color: rgb(71, 42, 24);" id="SamplersLink">Aging Room </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/samplers.asp'"><a href="http://www.cigar.com/cigars/samplers.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="SamplersLink">Samplers </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/suggestions.asp'"><a href="http://www.cigar.com/cigars/suggestions.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="SuggestionsLink">Suggestions </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/DailyDeal/ccCigarDeals.asp'"><a href="http://www.cigar.com/DailyDeal/ccCigarDeals.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="SuggestionsLink">Suggestions </a></li> </ul> </div> </td> <td class="CommonSimpleTabStripTab" onmouseover="tabOver(this); document.getElementById('ComDropDown3').style.display = 'inline';" onmouseout="tabOut(this); document.getElementById('ComDropDown3').style.display = 'none';"> <a style="float: right; display: block; height: 30px; line-height: 30px; padding-left: 12px; padding-right: 12px; vertical-align: middle;" href="http://www.cigar.com/cigars/samplers.asp"> Samplers</a> <div id="ComDropDown3" style="border: 1px solid rgb(71, 42, 24); margin: 28px 0px 0px; display: none; background-color: rgb(235, 230, 208); color: rgb(71, 42, 24); position: absolute; float: left; z-index: 200;" onmouseover="document.getElementById('ComDropDown3').style.display = 'inline';" onmouseout="document.getElementById('ComDropDown3').style.display = 'none';"> <ul style="margin: 0px; padding: 0px; width: 100px;"> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/viewsamplers.asp?subcatid=samp_var'"> <a href="http://www.cigar.com/cigars/viewsamplers.asp?subcatid=samp_var" style="line-height: 25px; color: rgb(71, 42, 24);" id="Variety SamplersLink">Variety Samplers </a> </li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/viewsamplers.asp?subcatid=gift_samp'"> <a href="http://www.cigar.com/cigars/viewsamplers.asp?subcatid=gift_samp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Gift SamplersLink">Gift Samplers </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/createSampler.asp'"><a href="http://www.cigar.com/cigars/createSampler.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Custom SamplerLink">Custom Sampler </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/viewsamplers.asp?subcatid=Feat%20Samp'"> <a href="http://www.cigar.com/cigars/viewsamplers.asp?subcatid=Feat%20Samp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Featured SamplersLink">Featured Samplers </a> </li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/YouPickOffer.asp'"><a href="http://www.cigar.com/cigars/YouPickOffer.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Brand SamplersLink">U Pick 2 Offer </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/exclusiveCustomSampler.asp'"> <a href="http://www.cigar.com/cigars/exclusiveCustomSampler.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Brand SamplersLink">Gurkha Sampler </a></li> </ul> </div> </td> <td class="CommonSimpleTabStripTab" onmouseover="tabOver(this); document.getElementById('ComDropDown4').style.display = 'inline';" onmouseout="tabOut(this); document.getElementById('ComDropDown4').style.display = 'none';"> <a style="float: right; display: block; height: 30px; line-height: 30px; padding-left: 12px; padding-right: 12px; vertical-align: middle;" href="http://www.cigar.com/gifts/index.asp"> Gifts</a> <div id="ComDropDown4" style="border: 1px solid rgb(71, 42, 24); margin: 28px 0px 0px; display: none; background-color: rgb(235, 230, 208); color: rgb(71, 42, 24); position: absolute; float: left; z-index: 200;" onmouseover="document.getElementById('ComDropDown4').style.display = 'inline';" onmouseout="document.getElementById('ComDropDown4').style.display = 'none';"> <ul style="margin: 0px; padding: 0px; width: 100px;"> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/gifts/viewgifts.asp?subcatid=gift_sets'"> <a href="http://www.cigar.com/gifts/viewgifts.asp?subcatid=gift_sets" style="line-height: 25px; color: rgb(71, 42, 24);" id="Gift SetsLink">Best Sellers </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cigars/viewsamplers.asp?subcatid=gift_samp'"> <a href="http://www.cigar.com/cigars/viewsamplers.asp?subcatid=gift_samp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Gift SamplersLink">Gift Samplers </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/index.asp'"><a href="http://www.cigar.com/accessories/index.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="AccesoriesLink">Accesories </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/club/index.asp'"><a href="http://www.cigar.com/club/index.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Cigar of the MonthLink">Cigar of the Month </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/gifts/certificates.asp'"><a href="http://www.cigar.com/gifts/certificates.asp" style="line-height: 25px; color: rgb(71, 42, 24);" id="Cigar of the MonthLink">Gift Certificates </a></li> </ul> </div> </td> <td class="CommonSimpleTabStripTab" onmouseover="tabOver(this); document.getElementById('ComDropDown5').style.display = 'inline';" onmouseout="tabOut(this); document.getElementById('ComDropDown5').style.display = 'none';"> <a style="float: right; display: block; height: 30px; line-height: 30px; padding-left: 12px; padding-right: 12px; vertical-align: middle;" href="http://www.cigar.com/accessories/index.asp"> Accessories</a> <div id="ComDropDown5" style="border: 1px solid rgb(71, 42, 24); margin: 28px 0px 0px; display: none; background-color: rgb(235, 230, 208); color: rgb(71, 42, 24); position: absolute; float: left; z-index: 200;" onmouseover="document.getElementById('ComDropDown5').style.display = 'inline';" onmouseout="document.getElementById('ComDropDown5').style.display = 'none';"> <ul style="margin: 0px; padding: 0px; width: 100px;"> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_hum'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_hum" style="line-height: 25px; color: rgb(71, 42, 24);" id="HumidorsLink">Humidors </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_cutt'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_cutt" style="line-height: 25px; color: rgb(71, 42, 24);" id="CuttersLink">Cutters </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_lite'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_lite" style="line-height: 25px; color: rgb(71, 42, 24);" id="LightersLink">Lighters </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_case'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_case" style="line-height: 25px; color: rgb(71, 42, 24);" id="CasesLink">Cases </a> </li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_humf'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_humf" style="line-height: 25px; color: rgb(71, 42, 24);" id="HumidificationLink">Humidification </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_book'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_book" style="line-height: 25px; color: rgb(71, 42, 24);" id="BooksLink">Books </a> </li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_ash'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_ash" style="line-height: 25px; color: rgb(71, 42, 24);" id="AshtraysLink">Ashtrays </a></li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_misc'"> <a href="http://www.cigar.com/accessories/viewaccessories.asp?subcatid=acc_misc" style="line-height: 25px; color: rgb(71, 42, 24);" id="OtherLink">Other </a> </li> </ul> </div> </td> <td class="CommonSimpleTabStripTab" onmouseover="tabOver(this);" onmouseout="tabOut(this);" onclick="window.location = 'http://www.cigar.com/sales/index.asp'"> <a style="float: right; display: block; height: 30px; line-height: 30px; padding-left: 12px; padding-right: 12px; vertical-align: middle;" href="http://www.cigar.com/sales/index.asp"> Sales</a> </td> <td class="CommonSimpleTabStripTab" onmouseover="tabOver(this); document.getElementById('ComDropDown8').style.display = 'inline';" onmouseout="tabOut(this); document.getElementById('ComDropDown8').style.display = 'none';"> <a style="float: right; display: block; height: 30px; line-height: 30px; padding-left: 12px; padding-right: 12px; vertical-align: middle;" href="http://www.cigar.com/cs/">Community</a> <div id="ComDropDown8" style="border: 1px solid rgb(71, 42, 24); margin: 28px 0px 0px; display: none; background-color: rgb(235, 230, 208); color: rgb(71, 42, 24); position: absolute; float: left; z-index: 200;" onmouseover="document.getElementById('ComDropDown8').style.display = 'inline';" onmouseout="document.getElementById('ComDropDown8').style.display = 'none';"> <ul style="margin: 0px; padding: 0px; width: 100px;"> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cs/forums/'"><a href="http://www.cigar.com/cs/forums/" style="line-height: 25px; color: rgb(71, 42, 24);" id="ForumsLink">Forums </a> </li> <li class="CommonSimpleTabStripTabSub" style="margin: 0px; padding: 3px; text-align: left; list-style: none outside none;" onmouseover="tabOverSub(this); " onmouseout="tabOutSub(this); " onclick="window.location = 'http://www.cigar.com/cs/blogs/'"><a href="http://w

    Read the article

  • Can't Remove Logical Drive/Array from HP P400

    - by Myles
    This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

    Read the article

  • Mysql performance problem & Failed DIMM

    - by murdoch
    Hi I have a dedicated mysql database server which has been having some performance problems recently, under normal load the server will be running fine, then suddenly out of the blue the performance will fall off a cliff. The server isn't using the swap file and there is 12GB of RAM in the server, more than enough for its needs. After contacting my hosting comapnies support they have discovered that there is a failed 2GB DIMM in the server and have scheduled to replace it tomorow morning. My question is could a failed DIMM result in the performance problems I am seeing or is this just coincidence? My worry is that they will replace the ram tomorrow but the problems will persist and I will still be lost of explanations so I am just trying to think ahead. The reason I ask is that there is plenty of RAM in the server, more than required and simply missing 2GB should be a problem, so if this failed DIMM is causing these performance problems then the OS must be trying to access the failed DIMM and slowing down as a result. Does that sound like a credible explanation? This is what DELLs omreport program says about the RAM, notice one dimm is "Critical" Memory Information Health : Critical Memory Operating Mode Fail Over State : Inactive Memory Operating Mode Configuration : Optimizer Attributes of Memory Array(s) Attributes : Location Memory Array 1 : System Board or Motherboard Attributes : Use Memory Array 1 : System Memory Attributes : Installed Capacity Memory Array 1 : 12288 MB Attributes : Maximum Capacity Memory Array 1 : 196608 MB Attributes : Slots Available Memory Array 1 : 18 Attributes : Slots Used Memory Array 1 : 6 Attributes : ECC Type Memory Array 1 : Multibit ECC Total of Memory Array(s) Attributes : Total Installed Capacity Value : 12288 MB Attributes : Total Installed Capacity Available to the OS Value : 12004 MB Attributes : Total Maximum Capacity Value : 196608 MB Details of Memory Array 1 Index : 0 Status : Ok Connector Name : DIMM_A1 Type : DDR3-Registered Size : 2048 MB Index : 1 Status : Ok Connector Name : DIMM_A2 Type : DDR3-Registered Size : 2048 MB Index : 2 Status : Ok Connector Name : DIMM_A3 Type : DDR3-Registered Size : 2048 MB Index : 3 Status : Critical Connector Name : DIMM_B1 Type : DDR3-Registered Size : 2048 MB Index : 4 Status : Ok Connector Name : DIMM_B2 Type : DDR3-Registered Size : 2048 MB Index : 5 Status : Ok Connector Name : DIMM_B3 Type : DDR3-Registered Size : 2048 MB the command free -m shows this, the server seems to be using more than 10GB of ram which would suggest it is trying to use the DIMM total used free shared buffers cached Mem: 12004 10766 1238 0 384 4809 -/+ buffers/cache: 5572 6432 Swap: 2047 0 2047 iostat output while problem is occuring avg-cpu: %user %nice %system %iowait %steal %idle 52.82 0.00 11.01 0.00 0.00 36.17 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 47.00 0.00 576.00 0 576 sda1 0.00 0.00 0.00 0 0 sda2 1.00 0.00 32.00 0 32 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 46.00 0.00 544.00 0 544 avg-cpu: %user %nice %system %iowait %steal %idle 53.12 0.00 7.81 0.00 0.00 39.06 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 49.00 0.00 592.00 0 592 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 49.00 0.00 592.00 0 592 avg-cpu: %user %nice %system %iowait %steal %idle 56.09 0.00 7.43 0.37 0.00 36.10 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 232.00 0.00 64520.00 0 64520 sda1 0.00 0.00 0.00 0 0 sda2 159.00 0.00 63728.00 0 63728 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 73.00 0.00 792.00 0 792 avg-cpu: %user %nice %system %iowait %steal %idle 52.18 0.00 9.24 0.06 0.00 38.51 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 49.00 0.00 600.00 0 600 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 49.00 0.00 600.00 0 600 avg-cpu: %user %nice %system %iowait %steal %idle 54.82 0.00 8.64 0.00 0.00 36.55 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 100.00 0.00 2168.00 0 2168 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 100.00 0.00 2168.00 0 2168 avg-cpu: %user %nice %system %iowait %steal %idle 54.78 0.00 6.75 0.00 0.00 38.48 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 84.00 0.00 896.00 0 896 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 84.00 0.00 896.00 0 896 avg-cpu: %user %nice %system %iowait %steal %idle 54.34 0.00 7.31 0.00 0.00 38.35 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 81.00 0.00 840.00 0 840 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 81.00 0.00 840.00 0 840 avg-cpu: %user %nice %system %iowait %steal %idle 55.18 0.00 5.81 0.44 0.00 38.58 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 317.00 0.00 105632.00 0 105632 sda1 0.00 0.00 0.00 0 0 sda2 224.00 0.00 104672.00 0 104672 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 93.00 0.00 960.00 0 960 avg-cpu: %user %nice %system %iowait %steal %idle 55.38 0.00 7.63 0.00 0.00 36.98 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 74.00 0.00 800.00 0 800 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 74.00 0.00 800.00 0 800 avg-cpu: %user %nice %system %iowait %steal %idle 56.43 0.00 7.80 0.00 0.00 35.77 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 72.00 0.00 784.00 0 784 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 72.00 0.00 784.00 0 784 avg-cpu: %user %nice %system %iowait %steal %idle 54.87 0.00 6.49 0.00 0.00 38.64 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 80.20 0.00 855.45 0 864 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 80.20 0.00 855.45 0 864 avg-cpu: %user %nice %system %iowait %steal %idle 57.22 0.00 5.69 0.00 0.00 37.09 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 33.00 0.00 432.00 0 432 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 33.00 0.00 432.00 0 432 avg-cpu: %user %nice %system %iowait %steal %idle 56.03 0.00 7.93 0.00 0.00 36.04 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 41.00 0.00 560.00 0 560 sda1 0.00 0.00 0.00 0 0 sda2 2.00 0.00 88.00 0 88 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 39.00 0.00 472.00 0 472 avg-cpu: %user %nice %system %iowait %steal %idle 55.78 0.00 5.13 0.00 0.00 39.09 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 29.00 0.00 392.00 0 392 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 29.00 0.00 392.00 0 392 avg-cpu: %user %nice %system %iowait %steal %idle 53.68 0.00 8.30 0.06 0.00 37.95 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 78.00 0.00 4280.00 0 4280 sda1 0.00 0.00 0.00 0 0 sda2 0.00 0.00 0.00 0 0 sda3 0.00 0.00 0.00 0 0 sda4 0.00 0.00 0.00 0 0 sda5 78.00 0.00 4280.00 0 4280

    Read the article

  • Active Directory Password Policy Problem

    - by Will
    To Clarify: my question is why isn't my password policy applying to people in the domain. Hey guys, having trouble with our password policy in Active Directory. Sometimes it just helps me to type out what I’m seeing It appears to not be applying properly across the board. I am new to this environment and AD in general but I think I have a general grasp of what should be going on. It’s a pretty simple AD setup without too many Group Policies being applied. It looks something like this DOMAIN Default Domain Policy (link enabled) Password Policy (link enabled and enforce) Personal OU Force Password Change (completely empty nothing in this GPO) IT OU Lockout Policy (link enabled and enforced) CS OU Lockout Policy Accouting OU Lockout Policy The password policy and default domain policy both define the same things under Computer ConfigWindows seetings sec settings Account Policies / Password Policy Enforce password History : 24 passwords remembered Maximum Password age : 180 days Min password age: 14 days Minimum Password Length: 6 characters Password must meet complexity requirements: Enabled Store Passwords using reversible encryption: Disabled Account Policies / Account Lockout Policy Account Lockout Duration 10080 Minutes Account Lockout Threshold: 5 invalid login attempts Reset Account Lockout Counter after : 30 minutes IT lockout This just sets the screen saver settings to lock computers when the user is Idle. After running Group Policy modeling it seems like the password policy and default domain policy is getting applied to everyone. Here is the results of group policy modeling on MO-BLANCKM using the mblanck account, as you can see the policies are both being applied , with nothing important being denied Group Policy Results NCLGS\mblanck on NCLGS\MO-BLANCKM Data collected on: 12/29/2010 11:29:44 AM Summary Computer Configuration Summary General Computer name NCLGS\MO-BLANCKM Domain NCLGS.local Site Default-First-Site-Name Last time Group Policy was processed 12/29/2010 10:17:58 AM Group Policy Objects Applied GPOs Name Link Location Revision Default Domain Policy NCLGS.local AD (15), Sysvol (15) WSUS-52010 NCLGS.local/WSUS/Clients AD (54), Sysvol (54) Password Policy NCLGS.local AD (58), Sysvol (58) Denied GPOs Name Link Location Reason Denied Local Group Policy Local Empty Security Group Membership when Group Policy was applied BUILTIN\Administrators Everyone S-1-5-21-507921405-1326574676-682003330-1003 BUILTIN\Users NT AUTHORITY\NETWORK NT AUTHORITY\Authenticated Users NCLGS\MO-BLANCKM$ NCLGS\Admin-ComputerAccounts-GP NCLGS\Domain Computers WMI Filters Name Value Reference GPO(s) None Component Status Component Name Status Last Process Time Group Policy Infrastructure Success 12/29/2010 10:17:59 AM EFS recovery Success (no data) 10/28/2010 9:10:34 AM Registry Success 10/28/2010 9:10:32 AM Security Success 10/28/2010 9:10:34 AM User Configuration Summary General User name NCLGS\mblanck Domain NCLGS.local Last time Group Policy was processed 12/29/2010 11:28:56 AM Group Policy Objects Applied GPOs Name Link Location Revision Default Domain Policy NCLGS.local AD (7), Sysvol (7) IT-Lockout NCLGS.local/Personal/CS AD (11), Sysvol (11) Password Policy NCLGS.local AD (5), Sysvol (5) Denied GPOs Name Link Location Reason Denied Local Group Policy Local Empty Force Password Change NCLGS.local/Personal Empty Security Group Membership when Group Policy was applied NCLGS\Domain Users Everyone BUILTIN\Administrators BUILTIN\Users NT AUTHORITY\INTERACTIVE NT AUTHORITY\Authenticated Users LOCAL NCLGS\MissingSkidEmail NCLGS\Customer_Service NCLGS\Email_Archive NCLGS\Job Ticket Users NCLGS\Office Staff NCLGS\CUSTOMER SERVI-1 NCLGS\Prestige_Jobs_Email NCLGS\Telecommuters NCLGS\Everyone - NCL WMI Filters Name Value Reference GPO(s) None Component Status Component Name Status Last Process Time Group Policy Infrastructure Success 12/29/2010 11:28:56 AM Registry Success 12/20/2010 12:05:51 PM Scripts Success 10/13/2010 10:38:40 AM Computer Configuration Windows Settings Security Settings Account Policies/Password Policy Policy Setting Winning GPO Enforce password history 24 passwords remembered Password Policy Maximum password age 180 days Password Policy Minimum password age 14 days Password Policy Minimum password length 6 characters Password Policy Password must meet complexity requirements Enabled Password Policy Store passwords using reversible encryption Disabled Password Policy Account Policies/Account Lockout Policy Policy Setting Winning GPO Account lockout duration 10080 minutes Password Policy Account lockout threshold 5 invalid logon attempts Password Policy Reset account lockout counter after 30 minutes Password Policy Local Policies/Security Options Network Security Policy Setting Winning GPO Network security: Force logoff when logon hours expire Enabled Default Domain Policy Public Key Policies/Autoenrollment Settings Policy Setting Winning GPO Enroll certificates automatically Enabled [Default setting] Renew expired certificates, update pending certificates, and remove revoked certificates Disabled Update certificates that use certificate templates Disabled Public Key Policies/Encrypting File System Properties Winning GPO [Default setting] Policy Setting Allow users to encrypt files using Encrypting File System (EFS) Enabled Certificates Issued To Issued By Expiration Date Intended Purposes Winning GPO SBurns SBurns 12/13/2007 5:24:30 PM File Recovery Default Domain Policy For additional information about individual settings, launch Group Policy Object Editor. Public Key Policies/Trusted Root Certification Authorities Properties Winning GPO [Default setting] Policy Setting Allow users to select new root certification authorities (CAs) to trust Enabled Client computers can trust the following certificate stores Third-Party Root Certification Authorities and Enterprise Root Certification Authorities To perform certificate-based authentication of users and computers, CAs must meet the following criteria Registered in Active Directory only Administrative Templates Windows Components/Windows Update Policy Setting Winning GPO Allow Automatic Updates immediate installation Enabled WSUS-52010 Allow non-administrators to receive update notifications Enabled WSUS-52010 Automatic Updates detection frequency Enabled WSUS-52010 Check for updates at the following interval (hours): 1 Policy Setting Winning GPO Configure Automatic Updates Enabled WSUS-52010 Configure automatic updating: 4 - Auto download and schedule the install The following settings are only required and applicable if 4 is selected. Scheduled install day: 0 - Every day Scheduled install time: 03:00 Policy Setting Winning GPO No auto-restart with logged on users for scheduled automatic updates installations Disabled WSUS-52010 Re-prompt for restart with scheduled installations Enabled WSUS-52010 Wait the following period before prompting again with a scheduled restart (minutes): 30 Policy Setting Winning GPO Reschedule Automatic Updates scheduled installations Enabled WSUS-52010 Wait after system startup (minutes): 1 Policy Setting Winning GPO Specify intranet Microsoft update service location Enabled WSUS-52010 Set the intranet update service for detecting updates: http://lavender Set the intranet statistics server: http://lavender (example: http://IntranetUpd01) User Configuration Administrative Templates Control Panel/Display Policy Setting Winning GPO Hide Screen Saver tab Enabled IT-Lockout Password protect the screen saver Enabled IT-Lockout Screen Saver Enabled IT-Lockout Screen Saver executable name Enabled IT-Lockout Screen Saver executable name sstext3d.scr Policy Setting Winning GPO Screen Saver timeout Enabled IT-Lockout Number of seconds to wait to enable the Screen Saver Seconds: 1800 System/Power Management Policy Setting Winning GPO Prompt for password on resume from hibernate / suspend Enabled IT-Lockout

    Read the article

  • Windows XP periodically disconnects, reconnects; Windows 7 doesn't

    - by einpoklum
    My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it doesn't happen. The connection is smooth (OS is sluggish though, but never mind that). Like I said, I updated the NIC driver. I tried reducing the MTU (used something called Dr. TCP), thinking maybe that would help, but it didn't. (I'm a bit but not super-knowledgeable about TCP parameters.) I'm guessing it's either a problem with the driver or some settings which are different between the two OSes. ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM

    Read the article

  • NSArray in NSArray do not return the image I want

    - by Tibi
    Hi there, I've got a code snippet here that I can't make working. NSUInteger i; //NSMutableArray *textures = [[NSMutableArray alloc] initWithCapacity:kNumTextures]; //NSMutableArray *texturesHighlighted = [[NSMutableArray alloc] initWithCapacity:kNumTextures]; NSMutableArray *textures= [[NSMutableArray alloc] init]; for (i = 1; i <= kNumTextures; i++) { NSString *imageName = [NSString stringWithFormat:@"texture%d.png", i]; NSString *imageNameHighlighted = [NSString stringWithFormat:@"texture%d_select.png", i]; UIImage *image = [UIImage imageNamed:imageName]; UIImage *imageHighlighted = [UIImage imageNamed:imageNameHighlighted]; //NSArray *pics = [[NSArray alloc] initWithObjects:(UIImage)image,(UIImage)imageHighlighted,nil]; NSArray *pics = [NSArray arrayWithObjects:image,imageHighlighted,nil]; [textures addObject:pics]; [pics release]; } //select randomly the position of the picture that will be represented twice on the board NSInteger randomTexture = arc4random()%([textures count]+1); //extract image corresponding to the randomly selected index //remove corresponding pictures from textures array NSArray *coupleTexture = [textures objectAtIndex:randomTexture]; [textures removeObjectAtIndex:randomTexture]; //create the image array containing 1 couple + all other pictures NSMutableArray *texturesBoard = [[NSMutableArray alloc] initWithCapacity:kNumPotatoes]; [texturesBoard addObject:coupleTexture]; [texturesBoard addObject:coupleTexture]; [coupleTexture release]; NSArray *pics = [[NSArray alloc] init]; for (pics in textures) { [texturesBoard addObject:pics]; } [pics release]; //shuffle the textures //[texturesBoard shuffledMutableArray]; //Array with masks NSMutableArray *masks= [[NSMutableArray alloc] init]; for (i = 1; i <= kNumMasks; i++) { NSString *maskName = [NSString stringWithFormat:@"mask%d.png", i]; UIImage *mask = [UIImage imageNamed:maskName]; //NSArray *pics = [[NSArray alloc] initWithObjects:mask,nil]; [masks addObject:mask]; //[pics release]; [maskName release]; [mask release]; } //Now mask all images in texturesBoard NSMutableArray *list = [[NSMutableArray alloc] init]; for (i = 0; i <= kNumMasks-1; i++) { //take on image couple from textures NSArray *imgArray = [texturesBoard objectAtIndex:i]; UIImage *mask = [masks objectAtIndex:i]; //mask it with the mask un the array at corresponding index UIImage *img1 =(UIImage *) [imgArray objectAtIndex:0]; UIImage *img2 =(UIImage *) [imgArray objectAtIndex:1]; UIImage *picsMasked = [self maskImage:(UIImage *)img1 withMask:(UIImage *)mask]; UIImage *picsHighlightedMasked = [self maskImage:(UIImage *)img2 withMask:(UIImage *)mask]; //Init image with highlighted status TapDetectingImageView *imageView = [[TapDetectingImageView alloc] initWithImage:picsMasked imageHighlighted:picsHighlightedMasked]; [list addObject:imageView]; } The problem here is that : img1 and img2, are not images but rather NSArray with multiple entries. Ican't figure why... dos any fresh spirit here could provide me with some clue to fix. maaany thanks.

    Read the article

  • JPanel paint method is not being called, why?

    - by swift
    When i run this code the paintComponent method is not being called It may be very simple error but i dont know why this, plz. package test; import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Point; import java.awt.image.BufferedImage; import javax.swing.BorderFactory; import javax.swing.JPanel; class Userboard extends JPanel { static BufferedImage image; String shape; Point start; Point end; Point mp; String selected; int ex,ey;//eraser int w,h; public Userboard() { setOpaque(false); System.out.println("paper"); setBackground(Color.white); setBorder(BorderFactory.createLineBorder(Color.black)); } public void paintComponent(Graphics g) { System.out.println("userboard-paint"); try { //g.drawImage(image, 0, 0, this); Graphics2D g2 = (Graphics2D)g; g2.setPaint(Color.black); if(start!=null && end!=null) { if(selected==("elipse")) { System.out.println("userboard-elipse"); g2.drawOval(start.x, start.y,(end.x-start.x),(end.y-start.y)); System.out.println("userboard-elipse drawn"); } else if(selected==("rect")) g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("line")) g2.drawLine(start.x,start.y,end.x,end.y); } } catch(Exception e) {} } //Function to draw the shape on image public void draw() { System.out.println("Userboard-draw"); System.out.println(selected); System.out.println(start); System.out.println(end); Graphics2D g2 = image.createGraphics(); g2.setPaint(Color.black); if(start!=null && end!=null) { if(selected=="line") g2.drawLine(start.x, start.y, end.x, end.y); else if(selected=="elipse") { System.out.println("userboard-elipse"); g2.drawOval(start.x, start.y, (end.x-start.x),(end.y-start.y)); System.out.println("userboard-elipse drawn"); } else if(selected=="rect") g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); } start=null; repaint(); g2.dispose(); } //To add the point to the board which is broadcasted by the server public void addPoint(Point ps,String varname,String shape,String event) { try { if(end==null) end = new Point(); if(start==null) start = new Point(); if(shape.equals("elipse")) this.selected="elipse"; else if(shape.equals("line")) this.selected="line"; else if(shape.equals("rect")) this.selected="rect"; else if(shape.equals("erase")) erase(); if(end!=null && start!=null) { if(varname.equals("end")) end=ps; else if(varname.equals("mp")) mp=ps; else if(varname.equals("start")) start=ps; if(event.equals("drag")) repaint(); else if(event.equals("release")) draw(); } repaint(); } catch(Exception e) { e.printStackTrace(); } } //Function which provides the erase functionality public void erase() { Graphics2D pic=(Graphics2D) image.getGraphics(); pic.setPaint(Color.white); if(start!=null) pic.fillRect(start.x, start.y, 10, 10); } //To set the size of the image public void setWidth(int x,int y) { System.out.println("("+x+","+y+")"); w=x; h=y; image = new BufferedImage(w, h, BufferedImage.TYPE_INT_ARGB); } //Function to add buttons into the panel, calling this function returns a panel }

    Read the article

  • How do I make this scroll layout work?

    - by JuiCe
    I am currently trying to get my UI to have a Title Bar, a bottom Button bar, with a ScrollView in between. I can get bits and pieces of it to work, but once I get a different piece working, the old part goes back to not showing up. Here is a picture of my UI on the left, with what I want it to look like on the right...(sorry for the sloppiness, I edited it in MS Paint :P ) To sum it up, I want the Version and Type fields to be moved with room for the other TextViews in the XML file, and I want both buttons to appear on the bottom bar. EDIT : The buttons on the bottom should be equal in size, I'm not too talented in making boxes in MS Paint EDIT 2 : Sorry....here is my XML file <?xml version="1.0" encoding="UTF-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:orientation="vertical" android:weightSum="1.0" > <LinearLayout android:layout_width="fill_parent" android:layout_height="wrap_content" > <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_horizontal" android:text="SN : " /> <TextView android:id="@+id/serialNumberView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_horizontal" /> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_horizontal" android:text="Ver : " /> <TextView android:id="@+id/versionView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_horizontal" /> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_horizontal" android:text="Type : " /> <TextView android:id="@+id/typeView" android:layout_width="wrap_content" android:layout_height="wrap_content" android:gravity="center_horizontal" /> </LinearLayout> <ScrollView android:layout_width="fill_parent" android:layout_height="fill_parent" android:layout_weight="1" > <LinearLayout android:layout_width="wrap_content" android:layout_height="wrap_content" android:orientation="vertical" android:layout_weight="1"> <CheckBox android:id="@+id/floatCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Float" /> <CheckBox android:id="@+id/tripCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Trip" /> <CheckBox android:id="@+id/closeCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Close" /> <CheckBox android:id="@+id/blockedCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Blocked" /> <CheckBox android:id="@+id/hardTripCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Hard Trip" /> <CheckBox android:id="@+id/phaseAngleCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Phase angle wrong for closing" /> <CheckBox android:id="@+id/diffVoltsCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Differential volts too low" /> <CheckBox android:id="@+id/networkVoltsCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Network volts too low to close" /> <CheckBox android:id="@+id/usingDefaultsCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Using Defaults( Reprogram )" /> <CheckBox android:id="@+id/relaxedCloseActiveCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Relaxed Close Active" /> <CheckBox android:id="@+id/commBoardDetectedCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Comm Board Detected" /> <CheckBox android:id="@+id/antiPumpBlock" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Anti-Pump Block" /> <CheckBox android:id="@+id/motorCutoffCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Motor Cutoff Inhibit" /> <CheckBox android:id="@+id/phaseRotationCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="Phase Rotation Wrong" /> <CheckBox android:id="@+id/usingDefaultDNPCheck" android:layout_width="wrap_content" android:layout_height="wrap_content" android:text= "Using Default DNP Profile" /> </LinearLayout> </ScrollView> <LinearLayout android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="horizontal" android:layout_weight="1" > <Button android:id="@+id/button3" android:layout_width="fill_parent" android:layout_height="fill_parent" android:text="Back" /> <Button android:id="@+id/button3" android:layout_width="fill_parent" android:layout_height="fill_parent" android:text="Read" /> </LinearLayout> </LinearLayout>

    Read the article

  • Keyboard for programming

    - by exhuma
    This may seem a bit a tangential topic. It's not directly related to actual code, but is important for our line of work nevertheless. Over the years, I've switched keyboards a few times. All of them had slightly different key layouts. And I'm not talking about the language/locale layout, but the physical layout! Why not the locale layout? Well, quite frankly, that's easy to change via software. I personally have a German keyboard but have it set to the UK layout. Why? It's quite hard to find different layouts in the shops where I live. Even ordering is not always easy in the shops. So that leaves me with Internet shops. But I prefer to "test" my keyboards before buying. The most notable changes are: Mangled "Home Key Block" I've seen this first on a Logitech keyboard, but it may have originated elsewhere. Shape of the "Enter" key I've seen three different cases so far: Two lines high, wider at the top Two lines high, wider at the bottom One line high Shape of the Backspace button I've seen two types so far: One "character" wide Two "characters" wide OS Keys For Macs, you have the Option and Command buttons, for Windows you have the Windows and Context Menu buttons. Cherry even produced a Linux keyboard once (unfortunately I cannot find many details except news results). I assume a dedicated Linux keyboard would sport a Compose key and had the SysRq always labelled as well (note that some standard layouts do this already). Obviously... .. all these differences entail that some keys have to be moved around the board a lot. Which means, if you are used to one and have to work on another one, you happen to hit the wrong keys quite often. As it happens, this is much more annoying for programmers as it is for people who write texts. Mainly because the keys which are moved around are special character keys, often used in programming. Often these hardware layouts depend also indirectly on where you buy the keyboards. Honestly, I haven't seen a keyboard with a one-line "Enter" key in Germany, nor Luxembourg. I may just have missed it but that's how it looks to me at least. A survey I've seen some attempts at surveys in the style "which keyboard is best for programming". But they all - in my opinion - are not using comparable sets. So I was wondering if it was possible to concoct a survey taking the above criteria into account. But ignoring key dimensions that one would be a bit overkill I guess ;) From what I can see there are the following types of physical layout: Backspace: 2-characters wide Enter: 2-Lines, wider top Backspace: 2-characters wide Enter: 1-Line Backspace: 1-character wide Enter: 2-Lines, wider bottom Then there are the other possible permutations (home-key block, os-keys), which in total makes for quite a large list of categories. Now, I wonder... Would anyone be interested in such a survey? I personally would. Because I am looking for the perfect fit for me. If yes, then I could really use the help of anyone here to propose some models to include in the survey. Once I have some models for each category (I'd say at least 3 per category) I could go ahead and write up a survey, put it on-line and let the it collect data for a while. What do you think?

    Read the article

  • My server app works strangely. What could be the reason(s)?

    - by Poni
    Hi! I've written a server app (two parts actually; proxy server and a game server) using C++ (board game). It uses IOCP as the sockets interface. For that app I've also written a "client simulator" (hereafter "client") app that spawns many client connections, where each of them plays, in very high speed, getting the CPU to be 100% utilized. So, that's how it goes in terms of topology: Game server - holds the game state. Real players do not connect it directly but through the proxy server. When a player joins a game, the proxy actually asks for it on behalf of that player, and the game server spawns a "player instance" for that player, and from now on, every notification between the game server and the player is being passed through the proxy. Proxy server - holds TCP connections with the real players. Players communicate with the game server through it only. Client simulator - connects to the proxy only. When running the server (again, it's actually two server apps) & client locally it all works just fine. I'm talking about 40k+ player instances in which all of them are active in a game. On the other hand, when running the server remotely with, say, 1000 clients who play things getting strange. For example, I run it as said above. Then with Task Manager I kill the client simulator app ("End Process Tree"). Then it seems like the buffer of the remote server got modified by another thread, or in other words, a memory corruption has been occurred. The server crashes because it got an unknown message id (it's a custom protocol where each message has it's own unique number). To make things clear, here is how I run the apps: PC1 - game server and clients simulator (because the clients will connect the proxy). PC2 - proxy server. The strangest thing is this: Only the remote side gets "corrupted". Remote in terms that it's not the PC I use to code the app (VC++ 2008). Let's call the PC I use to code the apps "PC1". Now for example, if this time I ran the game server on PC1 (it means that proxy server on PC2 and clients simulator on PC1), then the proxy server crashes with an "unknown message id" error. Another variation is when I run the proxy server on PC1 (again, the dev machine), the game server and the clients simulator on PC2, then the game server on PC2 gets crashed. As for the IOCP config: The servers' internal connections use the default receive/send buffer sizes. Tried even with setting them to 1MB, but no luck. I have three PCs in total; 2 x Vista 64bit <<-- one of those is the dev machine. The other is connected through WiFi. 1 x WinXP 32bit They're all connected in a "full duplex" manner. What could be the reason? Tried about everything; Stack tracing, recording some actions (like read/write logging).. I want to stress that only the PC I'm not using to code the apps crashes (actually the server app "role" which is running on it - sometimes the game server and sometimes the proxy server). At first I thought that maybe the wireless PC has problems (it's wireless..) but: TCP has it's own mechanisms to make sure the packet is delivered properly. Also, a crash also happens when trying it with the two PCs that are physically connected (Vista vs. XP). Another option is that the Windows DLLs versions might have problems, but then again, one of the tests is Vista vs. Vista, and the other is Vista vs. XP. Any idea?

    Read the article

  • Add objects to Arraylist inside loop and get a list of them outside loops

    - by AgusDG
    Im already done with a method to do a shot on a board (bidimensional array). THe shot goes from the bottom to the top, and depending of the direction, it do bounces on the walls to get to the top. The thing is that I did the method to represent the trayectory with an 'x'. Now, I want to add the coordinates x and y of each position of the shot (b [x][y]) to and Arraylist of Objects Position. public Position(int row,int col) { this.row = row; this.col = col; } The thing is that the method uses a for loop and inside if loops, and I'll need to create the objects inside, and get them outside. I did that : public static ArrayList<Position> showTrayectory (char [][] b , int shotDirection, char bubble){ int row = 0, col = 0; ArrayList<Position> aListPos = new ArrayList<Position>(); Position positionsOfShot = new Position(row,col); START = ((RIGHT_WALL)/2) + shotDirection; boolean shotRight = false; if(shotDirection < 0) shotRight = false; else if(shotDirection > 0) shotRight = true; for(int y = BOTTOM,x = START ;y >= 0;y--) { if(!isOut(y,x) && !emptyCell(y,x)) break; if(x <= LEFT_WALL) shotRight = true; if(x >= RIGHT_WALL) shotRight = false; if(!isOut(y,x) && shotRight == true) { positionsOfShot = new Position(y,x); aListPos.add(positionsOfShot); b[y][x] = SHOT; ++x; } if(!isOut(y,x) && shotRight == false){ positionsOfShot = new Position(y,x); aListPos.add(positionsOfShot); b[y][x] = SHOT; --x; } } // The nested for loops below are for showing the positions // But I dont need it that way // I must get the trayectory from an ArrayList and print it from there for(int y=0;y < b.length;y++){ System.out.println(); for(int x=0;x < b[y].length;x++){ System.out.print(" "+b [y][x]+" "); } } System.out.println("\nTrayectory of the shot ["+shotDirection+"]"); System.out.println("Next bubble ["+bubble+"]"); for( Position ii : aListPos){ System.out.println("(" + positionsOfShot.getFila() + "," + positionsOfShot.getColumna()+")"); } return aListPos; } The sentence " b[y][x] = SHOT; " is still there, to see the proper trayectory of the shot (its not needed that way), but what I need, is getting the trayectory in an ArrayList, and print the trayectory from there. All that I get is a wrong position, and repeated during the number of positions the shot goes through. I need some help. I suppose the problem is that Im creating and adding Position Objects inside an ArrayList inside loops, but in a wrong way. I will need you to explain me how to do it properly ; ) Thanks in advance. I'll add the output for you see better what is that above haha *************************** y b y b g r b g o y g a a r y o y y r b y g r r o b o y y g b a r y r o a y y o o r r g r - - - x - - - - - - - - - x - - - - - - - - - x - - - - - - - - - x - - - - - - - - - x - - - - - - - - - x - - - - - - - x - - - - - - - x - - - - - - - x - - - Trayectory of the shot [1] Next bubble [y] (5,3) (5,3) (5,3) (5,3) (5,3) (5,3) (5,3) (5,3) (5,3) Action?

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79  | Next Page >