Search Results

Search found 4287 results on 172 pages for 'frame'.

Page 75/172 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

  • bond0:0 + define virtual IP

    - by yael
    hi all in my linux server I have the follwoing: Linux Version - RedHat-Linux- 5.3.0.0 (this linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it posible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • Route web traffic through a separate iterface

    - by tkane
    I'd like to route web traffic through the wlan0 interface and the rest through eth1. Can you please help me with the iptables commands to achieve this. Below is my configuration. Thank you :) Edit: This is about desktop configuration not a web server set up. Basically I want to use one of my connections to browse the web and the other one for everything else. ifconfig: eth1 Link encap:Ethernet HWaddr 00:1d:09:59:80:70 inet addr:192.168.2.164 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::21d:9ff:fe59:8070/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:33 errors:0 dropped:0 overruns:0 frame:0 TX packets:41 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4771 (4.7 KB) TX bytes:7081 (7.0 KB) Interrupt:17 wlan0 Link encap:Ethernet HWaddr 00:1c:bf:90:8a:6d inet addr:192.168.1.70 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:bfff:fe90:8a6d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14256 (14.2 KB) TX bytes:14764 (14.7 KB) route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 1 0 0 eth1 192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 default adsl 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • SSH Connection Error : No route to host

    - by dewbot
    There are three machines in this scenario: Desktop A : [email protected] Laptop A : [email protected] Machine B : [email protected] All the machines have Ubuntu 11.04 (Desktop A is a 64bit one) and have both openssh-server and openssh-client. Now when I try to connect Desktop A to Laptop A or vice-versa by ssh [email protected] I get an error as port 22: No route to host in both the cases. I own both the machines, now if I try same commands from my friend's machine, i.e. via Desktop B, I can access both my Laptop and Desktop. But if I try to access Desktop B from my Laptop or by Desktop I get port 22: Connection timed out I even tried changing ssh port no. in ssh_config file but no success. Note: that 'Laptop A' uses WiFi connection while 'Machine A' uses Ethernet Connection and 'Machine B' is on an entirely different network. Laptop A && Desktop A - Router/Nano_Rcvr provided to me by ISP. So to one Router two Machines are connected and can be accessed at the same time. here is my ifconfig output for both the machines :- Laptop wlan0 Link encap:Ethernet HWaddr X:X:X:X:00:bc inet addr:1.23.73.111 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::219:e3ff:fe04:bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:108409 errors:0 dropped:0 overruns:0 frame:0 TX packets:82523 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44974080 (44.9 MB) TX bytes:22973031 (22.9 MB) Desktop eth0 Link encap:Ethernet HWaddr X:X:X:X:c5:78 inet addr:1.23.68.209 Bcast:1.23.95.255 Mask:255.255.224.0 inet6 addr: fe80::227:eff:fe04:c578/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10380 errors:0 dropped:0 overruns:0 frame:0 TX packets:4509 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1790366 (1.7 MB) TX bytes:852877 (852.8 KB) Interrupt:43 Base address:0x2000

    Read the article

  • Ubuntu - wireless connection works great but wired is totally dead

    - by Dan
    I am running Ubuntu 10.04 on my Acer Aspire One netbook. The wireless connection works great, but the wired is totally dead. When I plug the Ethernet wire, the little led next to the port doesn't blink. If I do ifconfig, this is the output: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1659 errors:0 dropped:0 overruns:0 frame:0 TX packets:1659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:132304 (132.3 KB) TX bytes:132304 (132.3 KB) wlan0 Link encap:Ethernet HWaddr 18:f4:6a:65:48:1f inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::1af4:6aff:fe65:481f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:94823 errors:0 dropped:0 overruns:0 frame:0 TX packets:81390 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:93028474 (93.0 MB) TX bytes:18002558 (18.0 MB) There is no eth0. Is that normal? In the "Network Connections" GUI there is an entry "Wired connection 1", its "MAC address" field is blank. How can I make the wired connection work?

    Read the article

  • "Network is unreachable" When pinging google, can connect to internal computers on debian VM

    - by musher
    Similar to this SU question: "Network is unreachable" when attempting to ping google, but internal addresses work Actually, it's pretty much the same base issue. I went through that thread trying to find a solution, I changed my resolv.conf: before: domain [my work domain] search [my work domain] nameserver [my gateway] nameserver [my gateway2] I changed it to: after: domain [my work domain] search [my work domain] nameserver 8.8.8.8 nameserver 8.8.4.4 However, any time I reboot the computer the resolv.conf gets overwritten to the previous version (the 'before' above). The issues began after I installed virtualbox additions, X server and (specifically) LXDE: Cat of apt history.log: Start-Date: 2014-08-21 10:03:42 Commandline: apt-get install virtualbox-guest-utils virtualbox-guest-dkms Install: x11-xkb-utils:amd64 (7.7+1, automatic), libxaw7:amd64 (1.0.12-2, automatic), xfonts-utils:$ End-Date: 2014-08-21 10:03:56 Start-Date: 2014-08-21 10:18:39 Commandline: apt-get install lxde Install: desktop-base:amd64 (7.0.3, automatic), libgoa-1.0-0b:amd64 (3.12.4-1, automatic), lxmenu-d$ End-Date: 2014-08-21 10:21:52 Start-Date: 2014-08-21 10:26:40 Commandline: apt-get upgrade Upgrade: libio-socket-ssl-perl:am ifconfig on the guest: root@Peridot:~# ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:89:c9:20 og inet addr:172.31.2.102 Bcast:172.31.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe89:c920/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2281 errors:0 dropped:1 overruns:0 frame:0 TX packets:463 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:266507 (260.2 KiB) TX bytes:120554 (117.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) The adapter in VBox is a bridged adapter directly onto my ethernet connection; as are my other 2 VMs (which work) Other SU questions I've tried: "connect: Network is unreachable" in VirtualBox VM

    Read the article

  • Route web browsing through a separate iterface

    - by tkane
    I'd like to route web browsing through the wlan0 interface and the rest through eth1. Can you please help me with the iptables commands to achieve this. Below is my configuration. Thank you :) Edit: This is about desktop configuration not a web server set up. Basically I want to use one of my connections to browse the web and the other one for everything else. ifconfig: eth1 Link encap:Ethernet HWaddr 00:1d:09:59:80:70 inet addr:192.168.2.164 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::21d:9ff:fe59:8070/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:33 errors:0 dropped:0 overruns:0 frame:0 TX packets:41 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4771 (4.7 KB) TX bytes:7081 (7.0 KB) Interrupt:17 wlan0 Link encap:Ethernet HWaddr 00:1c:bf:90:8a:6d inet addr:192.168.1.70 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:bfff:fe90:8a6d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14256 (14.2 KB) TX bytes:14764 (14.7 KB) route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 * 255.255.255.0 U 1 0 0 eth1 192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 default adsl 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    in my Linux server I have the following: Linux Version - RedHat-Linux- 5.3.0.0 (this Linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it possible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • Centos VM serving multiple public IP: how to configure network interface?

    - by Glasnhost
    I have a Centos 5.6 VM (Vsphere client) already responding to two different public IPs on eth0 and eth0:1 and I'm trying to add eth0:2. I copied the eth0 config file and restarted the network service. I don't understand which other steps are needed... ifconfig eth0 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.10 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163371837 errors:77 dropped:0 overruns:0 frame:0 TX packets:168210961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1891221045 (1.7 GiB) TX bytes:855899500 (816.2 MiB) Interrupt:59 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.11 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 eth0:2 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.12 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:188976973 errors:0 dropped:0 overruns:0 frame:0 TX packets:188976973 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2015642664 (1.8 GiB) TX bytes:2015642664 (1.8 GiB) more /etc/resolv.conf nameserver 10.1.12.1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.1.12.1 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Is it possible to theme Windows 7 like XP?

    - by LonelyPixel
    Everybody seems to mean the window frame colour and a set of desktop background pictures when they're talking about Windows 7 themes. Does anybody remember what themes used to be in Windows XP? You could actually alter the appearance of the window frame, how close buttons and menu popups looked, put a texture on the taskbar, all those funny things. Microsoft themselves have published a number of XP themes over time (Luna on XP, Royal on MCE2005, Zune later on). I don't say that most of those and the numerous third party XP themes were beautiful or even practical. But it was possible to create something nice. In Windows 7 (I suppress the existence of Windows Vista...) such a theme could well be used to increase readability to a level before Aero Glass again. I mean, you cannot really tell whether a Glass window is active or not. I've been tweaking the colours and transparency levels a lot recently but the only safe indicator is the close button: it's red when the window is active, it's colourless otherwise. Then there's the window title. It is always painted black, on however dark a background. Again, regardless of whether the window is active or not. Turning off Aero is not an option in Windows 7 anymore. Classic design looks just ugly there. It already wasn't exactly looking good on XP with the wide start menu. So, can we increase the readability of the Windows 7 UI with themes like in XP or didn't Microsoft learn a thing since the Windows 7 Preview "Vista"?

    Read the article

  • How to set up vpn tunnel (ipsec) connection

    - by Alfwed
    I'm working with a client who wants to set up a vpn tunnel between their network and ours. They're in charge of the tunnel and to give us the access they are asking me my public IP and my LAN IP. This is what i've got when i do an ifconfig on the server i will use to connect to the vpn $ ifconfig eth0 Link encap:Ethernet HWaddr d4:ae:52:cd:xx:xx inet adr:62.210.xxx.xxx Bcast:62.210.xxx.xxx Masque:255.255.255.0 adr inet6: fe80::d6ae:52ff:xxxx:xx/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:55255032 erreurs:0 :779628 overruns:0 frame:0 TX packets:5419527 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:5598164393 (5.5 GB) Octets transmis:1034297288 (1.0 GB) Interruption:16 Mémoire:c0000000-c0012800 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:45923382 erreurs:0 :0 overruns:0 frame:0 TX packets:45923382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 The inet adr:62.210.xxx.xxx is my public IP but it seems like i dont have any LAN IP. Can the connection work without LAN IP or should I create a private network somehow?

    Read the article

  • Using getters/setters in Java

    - by Crystal
    I'm having some trouble with the idea of accessing variables from other classes. I had a post here: http://stackoverflow.com/questions/3011642/having-access-to-a-private-variable-from-other-classes-in-java where I got some useful information, and thought an example would be better show it, and ask a separate question as well. I have a form that I can input data to, and it has a List variable. I didn't make it static at first, but I thought if I needed to get the total size from another class, then I wouldn't create an instance of that class in order to use the function to getTotalContacts. I basically want to update my status bar with the total number of contacts that are in my list. One of the members said in the above post to use the original Foo member to get the contacts, but I'm not sure how that works in this case. Any thoughts would be appreciated. Thanks. import java.awt.*; import java.awt.event.*; import javax.swing.*; import java.util.List; import java.util.ArrayList; public class AddressBook { public static void main(String[] args) { EventQueue.invokeLater(new Runnable() { public void run() { AddressBookFrame frame = new AddressBookFrame(); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JMenuBar menuBar = new JMenuBar(); frame.setJMenuBar(menuBar); JMenu fileMenu = new JMenu("File"); JMenuItem openItem = new JMenuItem("Open"); JMenuItem saveItem = new JMenuItem("Save"); JMenuItem saveAsItem = new JMenuItem("Save As"); JMenuItem printItem = new JMenuItem("Print"); JMenuItem exitItem = new JMenuItem("Exit"); fileMenu.add(openItem); fileMenu.add(saveItem); fileMenu.add(saveAsItem); fileMenu.add(printItem); fileMenu.add(exitItem); menuBar.add(fileMenu); JMenu editMenu = new JMenu("Edit"); JMenuItem newItem = new JMenuItem("New"); JMenuItem editItem = new JMenuItem("Edit"); JMenuItem deleteItem = new JMenuItem("Delete"); JMenuItem findItem = new JMenuItem("Find"); JMenuItem firstItem = new JMenuItem("First"); JMenuItem previousItem = new JMenuItem("Previous"); JMenuItem nextItem = new JMenuItem("Next"); JMenuItem lastItem = new JMenuItem("Last"); editMenu.add(newItem); editMenu.add(editItem); editMenu.add(deleteItem); editMenu.add(findItem); editMenu.add(firstItem); editMenu.add(previousItem); editMenu.add(nextItem); editMenu.add(lastItem); menuBar.add(editMenu); JMenu helpMenu = new JMenu("Help"); JMenuItem documentationItem = new JMenuItem("Documentation"); JMenuItem aboutItem = new JMenuItem("About"); helpMenu.add(documentationItem); helpMenu.add(aboutItem); menuBar.add(helpMenu); frame.setVisible(true); } }); } } class AddressBookFrame extends JFrame { public AddressBookFrame() { setLayout(new BorderLayout()); setTitle("Address Book"); setSize(DEFAULT_WIDTH, DEFAULT_HEIGHT); AddressBookToolBar toolBar = new AddressBookToolBar(); add(toolBar, BorderLayout.NORTH); AddressBookStatusBar aStatusBar = new AddressBookStatusBar(); add(aStatusBar, BorderLayout.SOUTH); AddressBookForm form = new AddressBookForm(); add(form, BorderLayout.CENTER); } public static final int DEFAULT_WIDTH = 500; public static final int DEFAULT_HEIGHT = 500; } /* Create toolbar buttons and add buttons to toolbar */ class AddressBookToolBar extends JPanel { public AddressBookToolBar() { setLayout(new FlowLayout(FlowLayout.LEFT)); JToolBar bar = new JToolBar(); JButton newButton = new JButton("New"); JButton editButton = new JButton("Edit"); JButton deleteButton = new JButton("Delete"); JButton findButton = new JButton("Find"); JButton firstButton = new JButton("First"); JButton previousButton = new JButton("Previous"); JButton nextButton = new JButton("Next"); JButton lastButton = new JButton("Last"); bar.add(newButton); bar.add(editButton); bar.add(deleteButton); bar.add(findButton); bar.add(firstButton); bar.add(previousButton); bar.add(nextButton); bar.add(lastButton); add(bar); } } /* Creates the status bar string */ class AddressBookStatusBar extends JPanel { public AddressBookStatusBar() { setLayout(new FlowLayout(FlowLayout.LEFT)); this.statusBarString = new JLabel("Total: " + AddressBookForm.getTotalContacts()); add(this.statusBarString); } public void updateLabel() { contactsLabel.setText(AddressBookForm.getTotalContacts().toString()); } private JLabel statusBarString; private JLabel contactsLabel; } class AddressBookForm extends JPanel { public AddressBookForm() { // create form panel this.setLayout(new GridLayout(2, 1)); JPanel formPanel = new JPanel(); formPanel.setLayout(new GridLayout(4, 2)); firstName = new JTextField(20); lastName = new JTextField(20); telephone = new JTextField(20); email = new JTextField(20); JLabel firstNameLabel = new JLabel("First Name: ", JLabel.LEFT); formPanel.add(firstNameLabel); formPanel.add(firstName); JLabel lastNameLabel = new JLabel("Last Name: ", JLabel.LEFT); formPanel.add(lastNameLabel); formPanel.add(lastName); JLabel telephoneLabel = new JLabel("Telephone: ", JLabel.LEFT); formPanel.add(telephoneLabel); formPanel.add(telephone); JLabel emailLabel = new JLabel("Email: ", JLabel.LEFT); formPanel.add(emailLabel); formPanel.add(email); add(formPanel); // create button panel JPanel buttonPanel = new JPanel(); JButton insertButton = new JButton("Insert"); JButton displayButton = new JButton("Display"); ActionListener insertAction = new AddressBookListener(); ActionListener displayAction = new AddressBookListener(); insertButton.addActionListener(insertAction); displayButton.addActionListener(displayAction); buttonPanel.add(insertButton); buttonPanel.add(displayButton); add(buttonPanel); } public static int getTotalContacts() { return addressList.size(); } //void addContact(Person contact); private JTextField firstName; private JTextField lastName; private JTextField telephone; private JTextField email; private JLabel contacts; private static List<Person> addressList = new ArrayList<Person>(); private class AddressBookListener implements ActionListener { public void actionPerformed(ActionEvent e) { String buttonPressed = e.getActionCommand(); System.out.println(buttonPressed); if (buttonPressed == "Insert") { Person aPerson = new Person(firstName.getText(), lastName.getText(), telephone.getText(), email.getText()); addressList.add(aPerson); } else { for (Person p : addressList) { System.out.println(p); } } } } } My other question is why do I get the error, "int cannot be dereferenced contactsLabel.setText(AddressbookForm.getTotalContacts().toString()); Thanks!

    Read the article

  • Passing ActionListeners in Java, pack()

    - by Crystal
    Two questions. First question is I'm trying to create a simple form that when you press a button, it adds a Person object to the ArrayList. However, since I am not used to GUIs, I tried creating one and am first just trying to get the user input from the JTextField, create an ActionListener object of the appropriate type, so once that works, then I can pass in all the JTextField inputs to create my Person object. Unfortunately, I am not getting any data when I type in something to the firstName JTextField and was wondering if someone could look at my code below. import java.awt.*; import java.awt.event.*; import javax.swing.*; import java.util.List; import java.util.ArrayList; public class AddressBook { public static void main(String[] args) { EventQueue.invokeLater(new Runnable() { public void run() { AddressBookFrame frame = new AddressBookFrame(); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JMenuBar menuBar = new JMenuBar(); frame.setJMenuBar(menuBar); JMenu fileMenu = new JMenu("File"); JMenuItem openItem = new JMenuItem("Open"); JMenuItem saveItem = new JMenuItem("Save"); JMenuItem saveAsItem = new JMenuItem("Save As"); JMenuItem printItem = new JMenuItem("Print"); JMenuItem exitItem = new JMenuItem("Exit"); fileMenu.add(openItem); fileMenu.add(saveItem); fileMenu.add(saveAsItem); fileMenu.add(printItem); fileMenu.add(exitItem); menuBar.add(fileMenu); JMenu editMenu = new JMenu("Edit"); JMenuItem newItem = new JMenuItem("New"); JMenuItem editItem = new JMenuItem("Edit"); JMenuItem deleteItem = new JMenuItem("Delete"); JMenuItem findItem = new JMenuItem("Find"); JMenuItem firstItem = new JMenuItem("First"); JMenuItem previousItem = new JMenuItem("Previous"); JMenuItem nextItem = new JMenuItem("Next"); JMenuItem lastItem = new JMenuItem("Last"); editMenu.add(newItem); editMenu.add(editItem); editMenu.add(deleteItem); editMenu.add(findItem); editMenu.add(firstItem); editMenu.add(previousItem); editMenu.add(nextItem); editMenu.add(lastItem); menuBar.add(editMenu); JMenu helpMenu = new JMenu("Help"); JMenuItem documentationItem = new JMenuItem("Documentation"); JMenuItem aboutItem = new JMenuItem("About"); helpMenu.add(documentationItem); helpMenu.add(aboutItem); menuBar.add(helpMenu); frame.setVisible(true); } }); } } class AddressBookFrame extends JFrame { public AddressBookFrame() { setLayout(new BorderLayout()); setTitle("Address Book"); setSize(DEFAULT_WIDTH, DEFAULT_HEIGHT); AddressBookToolBar toolBar = new AddressBookToolBar(); add(toolBar, BorderLayout.NORTH); AddressBookStatusBar aStatusBar = new AddressBookStatusBar("5"); add(aStatusBar, BorderLayout.SOUTH); AddressBookForm form = new AddressBookForm(); add(form, BorderLayout.CENTER); } public static final int DEFAULT_WIDTH = 500; public static final int DEFAULT_HEIGHT = 500; } /* Create toolbar buttons and add buttons to toolbar */ class AddressBookToolBar extends JPanel { public AddressBookToolBar() { setLayout(new FlowLayout(FlowLayout.LEFT)); JToolBar bar = new JToolBar(); JButton newButton = new JButton("New"); JButton editButton = new JButton("Edit"); JButton deleteButton = new JButton("Delete"); JButton findButton = new JButton("Find"); JButton firstButton = new JButton("First"); JButton previousButton = new JButton("Previous"); JButton nextButton = new JButton("Next"); JButton lastButton = new JButton("Last"); bar.add(newButton); bar.add(editButton); bar.add(deleteButton); bar.add(findButton); bar.add(firstButton); bar.add(previousButton); bar.add(nextButton); bar.add(lastButton); add(bar); } } /* Creates the status bar string */ class AddressBookStatusBar extends JPanel { public AddressBookStatusBar(String statusBarString) { setLayout(new FlowLayout(FlowLayout.LEFT)); this.statusBarString = new JLabel("Total number of people: " + statusBarString); add(this.statusBarString); } private JLabel statusBarString; private int totalContacts; } class AddressBookForm extends JPanel { public AddressBookForm() { this.setLayout(new GridLayout(2, 1)); JPanel formPanel = new JPanel(); formPanel.setLayout(new GridLayout(4, 2)); JTextField firstName = new JTextField(20); JTextField lastName = new JTextField(20); JTextField telephone = new JTextField(20); JTextField email = new JTextField(20); JLabel firstNameLabel = new JLabel("First Name: ", JLabel.LEFT); formPanel.add(firstNameLabel); formPanel.add(firstName); JLabel lastNameLabel = new JLabel("Last Name: ", JLabel.LEFT); formPanel.add(lastNameLabel); formPanel.add(lastName); JLabel telephoneLabel = new JLabel("Telephone: ", JLabel.LEFT); formPanel.add(telephoneLabel); formPanel.add(telephone); JLabel emailLabel = new JLabel("Email: ", JLabel.LEFT); formPanel.add(emailLabel); formPanel.add(email); add(formPanel); JPanel buttonPanel = new JPanel(); JButton insertButton = new JButton("Insert"); JButton displayButton = new JButton("Display"); // create button actions AddressBookManager insertAction = new AddressBookManager(firstName.getText()); insertButton.addActionListener(insertAction); buttonPanel.add(insertButton); buttonPanel.add(displayButton); add(buttonPanel); } private List<Person> addressList = new ArrayList<Person>(); private class AddressBookManager implements ActionListener { public AddressBookManager(String text) { // addressList.add( setName(text); System.out.println("Test" + text); } public void actionPerformed(ActionEvent e) { System.out.println("Hello" + name); } public void setName(String name) { this.name = name; } private String name; } } Second question is, how do I make my form not take up the whole center space. I don't like the stretch look and was hoping the JTextFields could be just one line long, not a big box. Same thing with the buttons. Any thoughts? Thanks.

    Read the article

  • How to convert ISampleGrabber::BufferCB's buffer to a bitmap

    - by user2509919
    I am trying to use the ISampleGrabberCB::BufferCB to convert the current frame to bitmap using the following code: int ISampleGrabberCB.BufferCB(double sampleTime, IntPtr buffer, int bufferLength) { try { Form1 form1 = new Form1("", "", ""); if (pictureReady == null) { Debug.Assert(bufferLength == Math.Abs(pitch) * videoHeight, "Wrong Buffer Length"); } Debug.Assert(imageBuffer != IntPtr.Zero, "Remove Buffer"); Bitmap bitmapOfCurrentFrame = new Bitmap(width, height, capturePitch, PixelFormat.Format24bppRgb, buffer); MessageBox.Show("Works"); form1.changepicturebox3(bitmapOfCurrentFrame); pictureReady.Set(); } catch (Exception ex) { MessageBox.Show(ex.ToString()); } return 0; } However this does not seem to be working. Additionally it seems to call this function when i press a button which runs the following code: public IntPtr getFrame() { int hr; try { pictureReady.Reset(); } catch (Exception ex) { MessageBox.Show(ex.ToString()); } imageBuffer = Marshal.AllocCoTaskMem(Math.Abs(pitch) * videoHeight); try { gotFrame = true; if (videoControl != null) { hr = videoControl.SetMode(stillPin, VideoControlFlags.Trigger); DsError.ThrowExceptionForHR(hr); } if (!pictureReady.WaitOne(9000, false)) { throw new Exception("Timeout waiting to get picture"); } } catch { Marshal.FreeCoTaskMem(imageBuffer); imageBuffer = IntPtr.Zero; } return imageBuffer; } Once this code is ran I get a message box which shows 'Works' thus meaning my BufferCB must of been called however does not update my picture box with the current image. Is the BufferCB not called after every new frame? If so why do I not recieve the 'Works' message box? Finally is it possible to convert every new frame into a bitmap (this is used for later processing) using BufferCB and if so how? Edited code: int ISampleGrabberCB.BufferCB(double sampleTime, IntPtr buffer, int bufferLength) { Debug.Assert(bufferLength == Math.Abs(pitch) * videoHeight, "Wrong Buffer Length"); Debug.Assert(imageBuffer != IntPtr.Zero, "Remove Buffer"); CopyMemory(imageBuffer, buffer, bufferLength); Decode(buffer); return 0; } public Image Decode(IntPtr imageData) { var bitmap = new Bitmap(width, height, pitch, PixelFormat.Format24bppRgb, imageBuffer); bitmap.RotateFlip(RotateFlipType.RotateNoneFlipY); Form1 form1 = new Form1("", "", ""); form1.changepicturebox3(bitmap); bitmap.Save("C:\\Users\\...\\Desktop\\A2 Project\\barcode.jpg"); return bitmap; } Button code: public void getFrameFromWebcam() { if (iPtr != IntPtr.Zero) { Marshal.FreeCoTaskMem(iPtr); iPtr = IntPtr.Zero; } //Get Image iPtr = sampleGrabberCallBack.getFrame(); Bitmap bitmapOfFrame = new Bitmap(sampleGrabberCallBack.width, sampleGrabberCallBack.height, sampleGrabberCallBack.capturePitch, PixelFormat.Format24bppRgb, iPtr); bitmapOfFrame.RotateFlip(RotateFlipType.RotateNoneFlipY); barcodeReader(bitmapOfFrame); } public IntPtr getFrame() { int hr; try { pictureReady.Reset(); } catch (Exception ex) { MessageBox.Show(ex.ToString()); } imageBuffer = Marshal.AllocCoTaskMem(Math.Abs(pitch) * videoHeight); try { gotFrame = true; if (videoControl != null) { hr = videoControl.SetMode(stillPin, VideoControlFlags.Trigger); DsError.ThrowExceptionForHR(hr); } if (!pictureReady.WaitOne(9000, false)) { throw new Exception("Timeout waiting to get picture"); } } catch { Marshal.FreeCoTaskMem(imageBuffer); imageBuffer = IntPtr.Zero; } return imageBuffer; } I also still need to press the button to run the BufferCB Thanks for reading.

    Read the article

  • Creating a Reverse Proxy using Jpcap

    - by Ramon Marco Navarro
    I need to create a program that receives HTTP request and forwards those requests to the web servers. I have successfully made this using only Java Sockets but the client needed the program to be implemented in Jpcap. I'd like to know if this is possible and what literature I should be reading for this project. This is what I have now by stitching together pieces from the Jpcap tutorial: import java.net.InetAddress; import java.io.*; import jpcap.*; import jpcap.packet.*; public class Router { public static void main(String args[]) { //Obtain the list of network interfaces NetworkInterface[] devices = JpcapCaptor.getDeviceList(); //for each network interface for (int i = 0; i < devices.length; i++) { //print out its name and description System.out.println(i+": "+devices[i].name + "(" + devices[i].description+")"); //print out its datalink name and description System.out.println(" datalink: "+devices[i].datalink_name + "(" + devices[i].datalink_description+")"); //print out its MAC address System.out.print(" MAC address:"); for (byte b : devices[i].mac_address) System.out.print(Integer.toHexString(b&0xff) + ":"); System.out.println(); //print out its IP address, subnet mask and broadcast address for (NetworkInterfaceAddress a : devices[i].addresses) System.out.println(" address:"+a.address + " " + a.subnet + " "+ a.broadcast); } int index = 1; // set index of the interface that you want to open. //Open an interface with openDevice(NetworkInterface intrface, int snaplen, boolean promics, int to_ms) JpcapCaptor captor = null; try { captor = JpcapCaptor.openDevice(devices[index], 65535, false, 20); captor.setFilter("port 80 and host 192.168.56.1", true); } catch(java.io.IOException e) { System.err.println(e); } //call processPacket() to let Jpcap call PacketPrinter.receivePacket() for every packet capture. captor.loopPacket(-1,new PacketPrinter()); captor.close(); } } class PacketPrinter implements PacketReceiver { //this method is called every time Jpcap captures a packet public void receivePacket(Packet p) { JpcapSender sender = null; try { NetworkInterface[] devices = JpcapCaptor.getDeviceList(); sender = JpcapSender.openDevice(devices[1]); } catch(IOException e) { System.err.println(e); } IPPacket packet = (IPPacket)p; try { // IP Address of machine sending HTTP requests (the client) // It's still on the same LAN as the servers for testing purposes. packet.dst_ip = InetAddress.getByName("192.168.56.2"); } catch(java.net.UnknownHostException e) { System.err.println(e); } //create an Ethernet packet (frame) EthernetPacket ether=new EthernetPacket(); //set frame type as IP ether.frametype=EthernetPacket.ETHERTYPE_IP; //set source and destination MAC addresses // MAC Address of machine running reverse proxy server ether.src_mac = new MacAddress("08:00:27:00:9C:80").getAddress(); // MAC Address of machine running web server ether.dst_mac = new MacAddress("08:00:27:C7:D2:4C").getAddress(); //set the datalink frame of the packet as ether packet.datalink=ether; //send the packet sender.sendPacket(packet); sender.close(); //just print out a captured packet System.out.println(packet); } } Any help would be greatly appreciated. Thank you.

    Read the article

  • Linux IPTables / routing issue

    - by Jon
    Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

    Read the article

  • Java - Problem when Resizing a JInternalFrame

    - by Amokrane
    Hi, In a previous SO question, I was talking about somes issues dealing with my MDI architecture. I have now another problem, when resizing my JInternalFrame. Here is a short video that illustrates the problem. I have a class: Cadre which is basically my JInternalFrame. public class Cadre extends JInternalFrame { /** Largeur par d'une fenêtre interne */ private int width; /** Hauteur d'une fenêtre interne */ private int height; /** Titre d'une fenêtre interne */ private String title; /** Toile associée à la fenêtre interne */ private Toile toile; /** Permet de compter le nombre de fenêtres internes ouvertes */ static int frameCount = 0; /** Permet de décaler les fenêtres internes à l'ouverture */ static final int xDecalage = 30, yDecalage = 30; public Cadre() { super("Form # " + (++frameCount), true, //resizable true, //closable true, //maximizable true);//iconifiable // Taille de la fenêtre interne par défaut width = 500; height = 500; // Titre par défaut title = "Form # " + (frameCount); // On associe une nouvelle toile à la fenêtre toile = new Toile(); this.setContentPane(toile); // On spécifie le titre this.setTitle(title); // Taille de chaque form par défaut this.setSize(width, height); // Permet d'ouvrir les frames de manière décalée par rapport à la dernière ouverte this.setLocation(xDecalage * frameCount, yDecalage * frameCount); } } And this is the JFrame that contains all the JInternalFrame(s): public class Fenetre extends JFrame { /** Titre de la fenêtre principale */ private String title; /** Largeur de la fenêtre */ private int width; /** Hauteur de la fenêtre */ private int height; /** Le menu */ private Menu menu; /** La barre d'outils */ private ToolBox toolBox; /** La zone contenant les JInternalFrame */ private JDesktopPane planche; /** Le pannel comportant la liste des formes à dessiner*/ private Pannel pannel; /** La liste de fenêtres ouvertes */ private static ArrayList<Cadre> cadres; public Fenetre(String inTitle, int inWidth, int inHeight) { // lecture de la taille de la frame width = inWidth; height = inHeight; // lecture du titre de la fenêtre title = inTitle; // On spécifie la taille de la fenêtre ainsi que le titre this.setSize(width, height); this.setTitle(title); // Initialisations des listes de cadres cadres = new ArrayList<Cadre>(); // Instanciation de la fenêtre this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); // On définit un layout pour notre frame this.setLayout(new BorderLayout()); // On crée la zone supérieure : Menu + ToolBar JPanel banniere = new JPanel(); banniere.setLayout(new BorderLayout()); // Instanciation d'un menu menu = new Menu(this); this.setJMenuBar(menu); // En haut la ToolBox toolBox = new ToolBox(); this.add(toolBox, BorderLayout.NORTH); // Ajout du pannel à gauche pannel = new Pannel(); this.add(pannel, BorderLayout.WEST); **// Intialisation de la planche de dessin planche = new JDesktopPane(); // On ajoute une Internal frame à notre desktop pane Cadre cadre = new Cadre(); cadre.setVisible(true); planche.add(cadre); try { cadre.setSelected(true); } catch (PropertyVetoException e) { e.printStackTrace(); }** // Pour faire en sorte que le déplacement soit "nice" planche.setDragMode(JDesktopPane.OUTLINE_DRAG_MODE); // On ajoute le nouveau cadre crée à la liste des cadres cadres.add(cadre); // Le contenu principal de la fenêtre est la planche contenant les différentes JInternalFrame this.getContentPane().add(planche); this.setVisible(true); } } So as you can see, I have declared a: JDesktopPane inside the main JFrame of my application. Any idea how to solve this? Thank you!

    Read the article

  • Crossover LAN connection between Ubuntu And Windows 7 is not working

    - by brett
    my question is closely related to: How do I connect Ubuntu 10.04 and Windows 7 with an Ethernet cable? What I am after is: Windows 7-------wireless-----\ Wifi router Ubuntu 10.04----wireless-----/ Windows 7-------wireless-----\ | cross_over_cable Wifi router | Ubuntu 10.04----wireless-----/ What I did was On Windows edit system32\drivers\etc\hosts Add the following line: 192.168.253.2 my_ubuntu_computer_name_&-wired //?not sure if this is right On Ubuntu: sudo gedit /etc/hosts Add the following line: 192.168.253.1 my_pc_computer_name&-wired //?not sure if this is right and then Ubuntu 12.04 as the host Right click on the Network Manager applet, click Edit Connections... In the Wired tab, click Auto eth0, then click Edit... In the IPv4 Settings tab, change Method: to Shared to other computers. Click Apply and enter your password when it asks you. Close everything and reboot. Plug the Ethernet cable into both computers. But, I can connect to my windows network folders from ubuntu via wifi I can't connect to my ubuntu network folders from windows via wifi(in fact this bit was working before - so my wifi connection is worse) my ubuntu Auto Ethernet seems to be on From Ubuntu eth0 Link encap:Ethernet HWaddr 00:11:2f:f3:43:8d inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:2fff:fef3:438d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:27279 (27.2 KB) Interrupt:19 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1147 errors:0 dropped:0 overruns:0 frame:0 TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94380 (94.3 KB) TX bytes:94380 (94.3 KB) wlan0 Link encap:Ethernet HWaddr 00:03:c9:e9:6f:bf inet addr:10.1.1.7 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::203:c9ff:fee9:6fbf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13186 errors:0 dropped:0 overruns:0 frame:0 TX packets:12187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1598882 (1.5 MB) TX bytes:1189555 (1.1 MB) From Windows: Windows IP Configuration Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : BoB Link-local IPv6 Address . . . . . : fe80::ecf7:c445:3725:b9c1%12 IPv4 Address. . . . . . . . . . . : 10.1.1.4 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.1 Tunnel adapter Local Area Connection* 15: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:1423:3ae3:f5fe:fefb Link-local IPv6 Address . . . . . : fe80::1423:3ae3:f5fe:fefb%23 Default Gateway . . . . . . . . . : :: Tunnel adapter isatap.BoB: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : BoB Tunnel adapter isatap.{D0C8EBA1-335D-4620-8570-6C36E8786D72}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

    Read the article

  • Rotate rectangle around center

    - by ESoft
    I am playing with Brad Larsen's adaption of the trackball app. I have two views at a 60 degree angle to each other and was wondering how I get the rotation to be in the center of this (non-closed) rectangle? In the images below I would have liked the rotation to take place all within the blue lines. Code (modified to only rotate around x axis): #import "MyView.h" //===================================================== // Defines //===================================================== #define DEGREES_TO_RADIANS(degrees) \ (degrees * (M_PI / 180.0f)) //===================================================== // Public Interface //===================================================== @implementation MyView - (void)awakeFromNib { transformed = [CALayer layer]; transformed.anchorPoint = CGPointMake(0.5f, 0.5f); transformed.frame = self.bounds; [self.layer addSublayer:transformed]; CALayer *imageLayer = [CALayer layer]; imageLayer.frame = CGRectMake(10.0f, 4.0f, self.bounds.size.width / 2.0f, self.bounds.size.height / 2.0f); imageLayer.transform = CATransform3DMakeRotation(DEGREES_TO_RADIANS(60.0f), 1.0f, 0.0f, 0.0f); imageLayer.contents = (id)[[UIImage imageNamed:@"IMG_0051.png"] CGImage]; imageLayer.borderColor = [UIColor yellowColor].CGColor; imageLayer.borderWidth = 2.0f; [transformed addSublayer:imageLayer]; imageLayer = [CALayer layer]; imageLayer.frame = CGRectMake(10.0f, 120.0f, self.bounds.size.width / 2.0f, self.bounds.size.height / 2.0f); imageLayer.transform = CATransform3DMakeRotation(DEGREES_TO_RADIANS(-60.0f), 1.0f, 0.0f, 0.0f); imageLayer.contents = (id)[[UIImage imageNamed:@"IMG_0089.png"] CGImage]; imageLayer.borderColor = [UIColor greenColor].CGColor; imageLayer.borderWidth = 2.0f; transformed.borderColor = [UIColor whiteColor].CGColor; transformed.borderWidth = 2.0f; [transformed addSublayer:imageLayer]; UIView *line = [[UIView alloc] initWithFrame:CGRectMake(0, self.bounds.size.height / 2.0f, self.bounds.size.width, 2)]; [line setBackgroundColor:[UIColor redColor]]; [self addSubview:line]; line = [[UIView alloc] initWithFrame:CGRectMake(0, self.bounds.size.height * (1.0f / 4.0f), self.bounds.size.width, 2)]; [line setBackgroundColor:[UIColor blueColor]]; [self addSubview:line]; line = [[UIView alloc] initWithFrame:CGRectMake(0, self.bounds.size.height * (3.0f / 4.0f), self.bounds.size.width, 2)]; [line setBackgroundColor:[UIColor blueColor]]; [self addSubview:line]; } - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { previousLocation = [[touches anyObject] locationInView:self]; } - (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event { CGPoint location = [[touches anyObject] locationInView:self]; //location = CGPointMake(previousLocation.x, location.y); CATransform3D currentTransform = transformed.sublayerTransform; //CGFloat displacementInX = location.x - previousLocation.x; CGFloat displacementInX = previousLocation.x - location.x; CGFloat displacementInY = previousLocation.y - location.y; CGFloat totalRotation = sqrt((displacementInX * displacementInX) + (displacementInY * displacementInY)); CGFloat angle = DEGREES_TO_RADIANS(totalRotation); CGFloat x = ((displacementInX / totalRotation) * currentTransform.m12 + (displacementInY/totalRotation) * currentTransform.m11); CATransform3D rotationalTransform = CATransform3DRotate(currentTransform, angle, x, 0, 0); previousLocation = location; transformed.sublayerTransform = rotationalTransform; } - (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { } - (void)dealloc { [super dealloc]; } @end

    Read the article

  • OpenVPN IPv6 over IPv4 tunnel

    - by user66779
    Today I installed OpenVPN 2.3rc2 on both my windows 7 client machine and centos 6 server. This new version of OpenVPN provides full compatibility for IPv6. The Problem: I am currently able to connect to the server (through the IPv4 tunnel) and ping the IPv6 address which is assigned to my client and I can also ping the tun0 interface on the server. However, I cannot browse to any IPv6 websites. My vps provider has given me this: 2607:f840:0044:0022:0000:0000:0000:0000/64 is routed to this server (2607:f840:0:3f:0:0:0:eda). This is ifconfig after setup with OpenVPN running: eth0 Link encap:Ethernet HWaddr 00:16:3E:12:77:54 inet addr:208.111.39.160 Bcast:208.111.39.255 Mask:255.255.255.0 inet6 addr: 2607:f740:0:3f::eda/64 Scope:Global inet6 addr: fe80::216:3eff:fe12:7754/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2317253 errors:0 dropped:7263 overruns:0 frame:0 TX packets:1977414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1696120096 (1.5 GiB) TX bytes:1735352992 (1.6 GiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 inet6 addr: 2607:f740:44:22::1/64 Scope:Global UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:739567 errors:0 dropped:0 overruns:0 frame:0 TX packets:1218240 errors:0 dropped:1542 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:46512557 (44.3 MiB) TX bytes:1559930874 (1.4 GiB) So OpenVPN is sucessfully creating a tun0 interface and assigning clients IPv6 addresses using 2607:f840:44:22::/64. The first client to connect is getting 2607:f840:44:22::1000 and the second 2607:f840:44:22::1001, and so on... plus 1 each time. After connecting as the first client, I can ping from my windows client machine 2607:f740:44:22::1 and 2607:f740:44:22::1000. However, I have no access to IPv6 websites. I believe the problem is that the tun0 IPv6 addressees are not being forwarded to the eth0 interface. This is the firewall running on the server: #!/bin/sh # # iptables configuration script # # Flush all current rules from iptables # iptables -F iptables -t nat -F # # Allow SSH connections on tcp port 22 # iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept connections on 1195 for vpn access from client # iptables -A INPUT -i eth0 -p udp --dport 1195 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 1195 -m state --state ESTABLISHED -j ACCEPT # # Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 209.111.39.160 iptables -A FORWARD -j REJECT # # Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # IPv6 # IP6TABLES=/sbin/ip6tables $IP6TABLES -F INPUT $IP6TABLES -F FORWARD $IP6TABLES -F OUTPUT echo -n "1" >/proc/sys/net/ipv6/conf/all/forwarding echo -n "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp echo -n "0" >/proc/sys/net/ipv6/conf/all/autoconf echo -n "0" >/proc/sys/net/ipv6/conf/all/accept_ra $IP6TABLES -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p icmpv6 -j ACCEPT $IP6TABLES -P INPUT ACCEPT $IP6TABLES -P FORWARD ACCEPT $IP6TABLES -P OUTPUT ACCEPT Server.conf: server-ipv6 2607:f840:44:22::/64 server 10.8.0.0 255.255.255.0 port 1195 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" keepalive 10 60 tls-auth ta.key 0 cipher AES-256-CBC comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 5 Client.conf: client dev tun nobind keepalive 10 60 hand-window 15 remote 209.111.39.160 1195 udp persist-key persist-tun ca ca.crt key client1.key cert client1.crt remote-cert-tls server tls-auth ta.key 1 comp-lzo verb 3 cipher AES-256-CBC I'm not sure where I am going wrong, it could be the firewall, or something missing from server or client.conf. This version of OpenVPN was only released yesterday, and there's little info on the internet about how to setup an IPv6 over IPv4 vpn tunnel. I've read the manual for this new version of OpenVPN (parts pertaining to IPv6) and it provides very little info too. Thanks for any help.

    Read the article

  • VLC 2.0.3 on Lubuntu 12.04: No audio?

    - by drezabek
    I am on Lubuntu 12.04, and I have installed VLC media player version 2.0.3. When I try and play an audio file, it appears to load fine, and the media position bar displays the progress, and it says it is playing, but I can't here any thing through my speakers. I can hear game audio, web audio, and audio from SMPlayer just fine, but with VLC, I can't here anything. Below is the "Messages" output with the verbosity option set to "2 (debug)" main debug: processing request item: The Bottom, node: Playlist, skip: 0 main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: starting playback of the new playlist item main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: creating new input thread main debug: Creating an input for 'The Bottom' main debug: TIMER input launching for 'Floex - Machinarium Soundtrack - 01 The Bottom.flac' : 23.706 ms - Total 23.706 ms / 1 intvls (Avg 23.706 ms) main debug: using timeshift granularity of 50 MiB, in path '/tmp' main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' gives access `file' demux `' path `/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access_demux module: 3 candidates main debug: no access_demux module matching "file" could be loaded main debug: TIMER module_need() : 2.332 ms - Total 2.332 ms / 1 intvls (Avg 2.332 ms) main debug: creating access 'file' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac', path='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access module: 2 candidates filesystem debug: opening file `/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: using access module "filesystem" main debug: TIMER module_need() : 0.762 ms - Total 0.762 ms / 1 intvls (Avg 0.762 ms) main debug: Using stream method for AStream* main debug: starting pre-buffering main debug: received first data after 0 ms main debug: pre-buffering done 1024 bytes in 0s - 43478 KiB/s main debug: looking for stream_filter module: 7 candidates main debug: no stream_filter module matching "any" could be loaded main debug: TIMER module_need() : 0.236 ms - Total 0.236 ms / 1 intvls (Avg 0.236 ms) main debug: looking for stream_filter module: 1 candidate main debug: using stream_filter module "stream_filter_record" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for demux module: 54 candidates flacsys debug: Picture type=3 mime=image/png description='' file length=679371 qt4 debug: IM: Setting an input main debug: looking for packetizer module: 21 candidates main debug: using packetizer module "packetizer_flac" main debug: TIMER module_need() : 0.211 ms - Total 0.211 ms / 1 intvls (Avg 0.211 ms) main debug: using demux module "flacsys" main debug: TIMER module_need() : 4.023 ms - Total 4.023 ms / 1 intvls (Avg 4.023 ms) main debug: looking for a subtitle file in /home/doug/Music/unsorted/Floex - Machinarium Soundtrack/ main debug: looking for meta reader module: 2 candidates main debug: using meta reader module "taglib" main debug: TIMER module_need() : 5.245 ms - Total 5.245 ms / 1 intvls (Avg 5.245 ms) main debug: removing module "taglib" main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' successfully opened main debug: selecting program id=0 main debug: looking for decoder module: 30 candidates main debug: using decoder module "flac" main debug: TIMER module_need() : 0.442 ms - Total 0.442 ms / 1 intvls (Avg 0.442 ms) main debug: Buffering 0% flac debug: decode STREAMINFO flac debug: channels:2 samplerate:44100 bitspersamples:16 flac debug: STREAMINFO decoded main debug: Buffering 30% main debug: recycling audio output main debug: looking for audio output module: 3 candidates main debug: Buffering 61% pulse debug: using stereo channel map pulse debug: using library version 1.1.0 pulse debug: (compiled with version 1.1.0, protocol 26) main debug: Buffering 92% main debug: Stream buffering done (371 ms in 2 ms) pulse debug: connected locally to unix:/home/doug/.pulse/dce22254e867f905188a2ce200000003-runtime/native as client #14 pulse debug: using protocol 26, server protocol 26 pulse debug: using buffer metrics: maxlength=4194304, tlength=9880, prebuf=0, minreq=3528 pulse debug: connected to sink 0: alsa_output.pci-0000_00_14.2.analog-stereo main debug: using audio output module "pulse" main debug: TIMER module_need() : 4.571 ms - Total 4.571 ms / 1 intvls (Avg 4.571 ms) main debug: output 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'f32l'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: f32l->s16l, bits per sample: 32->16 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.187 ms - Total 0.187 ms / 1 intvls (Avg 0.187 ms) main debug: conversion pipeline completed main debug: looking for audio mixer module: 2 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.125 ms - Total 0.125 ms / 1 intvls (Avg 0.125 ms) main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: looking for audio filter module: 1 candidate scaletempo debug: format: 44100 rate, 2 nch, 4 bps, fl32 scaletempo debug: params: 30 stride, 0.200 overlap, 14 search scaletempo debug: 1.000 scale, 1323.000 stride_in, 1323 stride_out, 1059 standing, 264 overlap, 617 search, 2204 queue, fl32 mode main debug: using audio filter module "scaletempo" main debug: TIMER module_need() : 0.233 ms - Total 0.233 ms / 1 intvls (Avg 0.233 ms) main debug: filter(s) 's16l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo pulse debug: listing sink alsa_output.pci-0000_00_14.2.analog-stereo (0): Built-in Audio Analog Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: s16l->f32l, bits per sample: 16->32 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.147 ms - Total 0.147 ms / 1 intvls (Avg 0.147 ms) main debug: conversion pipeline completed pulse debug: base volume: 65536 main debug: looking for audio filter module: 1 candidate equalizer debug: equalizer loaded for 44100 Hz with 10 bands 2 pass equalizer debug: 60 Hz -> factor:0.000000 alpha:0.003013 beta:0.993973 gamma:1.993901 equalizer debug: 170 Hz -> factor:0.000000 alpha:0.008490 beta:0.983019 gamma:1.982437 equalizer debug: 310 Hz -> factor:0.000000 alpha:0.015374 beta:0.969252 gamma:1.967331 equalizer debug: 600 Hz -> factor:0.000000 alpha:0.029328 beta:0.941343 gamma:1.934254 equalizer debug: 1000 Hz -> factor:0.000000 alpha:0.047918 beta:0.904163 gamma:1.884869 equalizer debug: 3000 Hz -> factor:0.000000 alpha:0.130408 beta:0.739184 gamma:1.582718 equalizer debug: 6000 Hz -> factor:0.000000 alpha:0.226555 beta:0.546889 gamma:1.015267 equalizer debug: 12000 Hz -> factor:0.000000 alpha:0.344937 beta:0.310127 gamma:-0.181410 equalizer debug: 14000 Hz -> factor:0.000000 alpha:0.366438 beta:0.267123 gamma:-0.521151 equalizer debug: 16000 Hz -> factor:0.000000 alpha:0.379009 beta:0.241981 gamma:-0.808451 main debug: using audio filter module "equalizer" main debug: TIMER module_need() : 0.353 ms - Total 0.353 ms / 1 intvls (Avg 0.353 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: looking for visualization2 module: 1 candidate main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 3.278 ms - Total 3.278 ms / 1 intvls (Avg 3.278 ms) main debug: looking for video filter2 module: 18 candidates swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: RGBA with scaling using Bicubic (good quality) main debug: using video filter2 module "swscale" main debug: TIMER module_need() : 1.037 ms - Total 1.037 ms / 1 intvls (Avg 1.037 ms) main debug: looking for video filter2 module: 18 candidates yuvp debug: YUVP to YUVA converter main debug: using video filter2 module "yuvp" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: Deinterlacing available main debug: deinterlace 0, mode blend, is_needed 0 main debug: Opening vout display wrapper main debug: looking for vout display module: 6 candidates main debug: looking for vout window xid module: 4 candidates qt4 debug: requesting video... qt4 debug: Video was requested 0, 0 main debug: using vout window xid module "qt4" main debug: TIMER module_need() : 61.671 ms - Total 61.671 ms / 1 intvls (Avg 61.671 ms) main debug: looking for inhibit module: 2 candidates main debug: using inhibit module "xdg_screensaver" main debug: TIMER module_need() : 0.336 ms - Total 0.336 ms / 1 intvls (Avg 0.336 ms) xdg_screensaver debug: started xdg-screensaver (PID = 6682) xcb_xv debug: connected to X11.0 server xcb_xv debug: vendor : The X.Org Foundation xcb_xv debug: version: 11103000 xcb_xv debug: using screen 0x15a xcb_xv debug: using XVideo extension v2.2 xcb_xv debug: using adaptor NV17 Video Texture xcb_xv debug: using port 310 xcb_xv debug: using image format 0x30323449 xcb_xv debug: using X11 visual ID 0x21 (depth: 24) xcb_xv debug: using X11 window 0x03400000 xcb_xv debug: using X11 graphic context 0x03400002 main debug: VoutDisplayEvent 'fullscreen' 0 main debug: VoutDisplayEvent 'resize' 800x500 window main debug: using vout display module "xcb_xv" main debug: TIMER module_need() : 69.890 ms - Total 69.890 ms / 1 intvls (Avg 69.890 ms) main debug: original format sz 800x500, of (0,0), vsz 800x500, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: removing module "freetype" main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 4.552 ms - Total 4.552 ms / 1 intvls (Avg 4.552 ms) main debug: using visualization2 module "visual" main debug: TIMER module_need() : 84.104 ms - Total 84.104 ms / 1 intvls (Avg 84.104 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates main debug: using audio filter module "samplerate" main debug: TIMER module_need() : 0.375 ms - Total 0.375 ms / 1 intvls (Avg 0.375 ms) main debug: conversion pipeline completed main debug: End of audio preroll main debug: Decoder buffering done in 91 ms main warning: PTS is out of range (-9269), dropping buffer pulse debug: deferring start (190703 us) main debug: looking for video blending module: 1 candidate main debug: using video blending module "blend" main debug: TIMER module_need() : 0.275 ms - Total 0.275 ms / 1 intvls (Avg 0.275 ms) main debug: Detected interlaced video main debug: deinterlace 0, mode blend, is_needed 1 xcb_xv debug: display is visible pulse debug: starting deferred pulse warning: too late by 93760 us pulse debug: changed sample rate to 44186 Hz pulse debug: started pulse warning: too late by 94474 us pulse debug: changed sample rate to 44229 Hz pulse warning: too late by 93532 us pulse debug: changed sample rate to 44272 Hz pulse warning: too late by 92829 us pulse debug: changed sample rate to 44315 Hz pulse warning: too late by 92132 us pulse debug: changed sample rate to 44358 Hz xcb_xv debug: display is visible pulse warning: too late by 91534 us pulse debug: changed sample rate to 44401 Hz xcb_xv debug: display is visible pulse warning: too late by 89482 us pulse debug: changed sample rate to 44440 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible pulse warning: too late by 87529 us pulse debug: changed sample rate to 44479 Hz pulse warning: too late by 84577 us pulse debug: changed sample rate to 44504 Hz main debug: auto hiding mouse cursor pulse warning: too late by 78562 us pulse debug: changed sample rate to 44492 Hz pulse warning: too late by 68015 us pulse debug: changed sample rate to 44422 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor pulse debug: changed sample rate to 44336 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor I have had issues with VLC in the past- the audio quality was extremely crackly, as if the headphone jack was plugged in only half way, and the sounds were extremely sharp and caused my speakers to make a ringing/vibrating noise... It would eventually start working after I messed around with the audio settings, but it happened every restart. I eventually switched to SMPlayer, but now I need some of the features that VLC offers, but I still can't use VLC. At this point, the audio can not be heard at all, and the method I used before, messing around with the audio settings, isn't getting me anywhere. (note, I reposted this on VideoLan's forums, link is here: http://forum.videolan.org/viewtopic.php?f=13&t=104726) Please let me know if you need more information, or are confused by something I posted! Thanks!

    Read the article

  • Using a portable USB monitor in Ubuntu 13.04 (AOC e1649Fwu - DisplayLink)

    Having access to a little bit of IT hardware extravaganza isn't that easy here in Mauritius for exactly two reasons - either it is simply not available or it is expensive like nowhere. Well, by chance I came across an advert by a local hardware supplier and their offer of the week caught my attention - a portable USB monitor. Sounds cool, and the specs are okay as well. It's completely driven via USB 2.0, has a light weight, the dimensions would fit into my laptop bag and the resolution of 1366 x 768 pixels is okay for a second screen. Long story, short ending: I called them and only got to understand that they are out of stock - how convenient! Well, as usual I left some contact details and got the regular 'We call you back' answer. Surprisingly, I didn't receive a phone call as promised and after starting to complain via social media networks they finally came back to me with new units available - and *drum-roll* still the same price tag as promoted (and free delivery on top as one of their employees lives in Flic en Flac). Guess, it was a no-brainer to get at least one unit to fool around with. In worst case it might end up as image frame on the shelf or so... The usual suspects... Ubuntu first! Of course, the packing mentions only Windows or Mac OS as supported operating systems and without hesitation at all, I hooked up the device on my main machine running on Ubuntu 13.04. Result: Blackout... Hm, actually not the situation I was looking for but okay can't be too difficult to get this piece of hardware up and running. Following the output of syslogd (or dmesg if you prefer) the device has been recognised successfully but we got stuck in the initialisation phase. Oct 12 08:17:23 iospc2 kernel: [69818.689137] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 12 08:17:23 iospc2 kernel: [69818.800306] usb 2-4: device descriptor read/64, error -32Oct 12 08:17:24 iospc2 kernel: [69819.043620] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 08:17:24 iospc2 kernel: [69819.043630] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 08:17:24 iospc2 kernel: [69819.043636] usb 2-4: Product: e1649FwuOct 12 08:17:24 iospc2 kernel: [69819.043642] usb 2-4: Manufacturer: DisplayLinkOct 12 08:17:24 iospc2 kernel: [69819.043647] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 08:17:24 iospc2 kernel: [69819.046073] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 08:17:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 08:17:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 12 08:17:30 iospc2 kernel: [69825.411220] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 12 08:17:30 iospc2 kernel: [69825.498778] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 12 08:17:30 iospc2 kernel: [69825.498786] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 12 08:17:30 iospc2 kernel: [69825.498909] usbcore: registered new interface driver udl The device has been recognised as USB device without any question and it is listed properly: # lsusb...Bus 002 Device 005: ID 17e9:4107 DisplayLink ... A quick and dirty research on the net gave me some hints towards the udlfb framebuffer device for USB DisplayLink devices. By default this kernel module is blacklisted $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udl#blacklist udlblacklist udlfb and it is recommended to load it manually. So, unloading the whole udl stack and giving udlfb a shot: Oct 12 08:22:31 iospc2 kernel: [70126.642809] usbcore: registered new interface driver udlfb But still no reaction on the external display which supposedly should have been on and green. Display okay? Test run on Windows Just to be on the safe side and to exclude any hardware related defects or whatsoever - you never know what happened during delivery. I moved the display to a new position on the opposite side of my laptop, installed the display drivers first in Windows Vista (I know, I know...) as recommended in the manual, and then finally hooked it up on that machine. Tada! Display has been recognised correctly and I have a proper choice between cloning and extending my desktop. Testing whether the display is working properly - using Windows Vista Okay, good to know that there is nothing wrong on the hardware side just software... Back to Ubuntu - Kernel too old Some more research on Google and various hits recommend that the original displaylink driver has been merged into the recent kernel development and one should manually upgrade the kernel image (and both header) packages for Ubuntu. At least kernel 3.9 or higher would be necessary, and so I went out to this URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/ and I downloaded all the good stuff from the v3.9-raring directory. The installation itself is easy going via dpkg: $ sudo dpkg -i linux-image-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb$ sudo dpkg -i linux-headers-3.9.0-030900_3.9.0-030900.201304291257_all.deb$ sudo dpkg -i linux-headers-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb As with any kernel upgrades it is necessary to restart the system in order to use the new one. Said and done: $ uname -r3.9.0-030900-generic And now connecting the external display gives me the following output in /var/log/syslog: Oct 12 17:51:36 iospc2 kernel: [ 2314.984293] usb 2-4: new high-speed USB device number 6 using ehci-pciOct 12 17:51:36 iospc2 kernel: [ 2315.096257] usb 2-4: device descriptor read/64, error -32Oct 12 17:51:36 iospc2 kernel: [ 2315.337105] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 17:51:36 iospc2 kernel: [ 2315.337115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 17:51:36 iospc2 kernel: [ 2315.337122] usb 2-4: Product: e1649FwuOct 12 17:51:36 iospc2 kernel: [ 2315.337127] usb 2-4: Manufacturer: DisplayLinkOct 12 17:51:36 iospc2 kernel: [ 2315.337132] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338292] udlfb: DisplayLink e1649Fwu - serial #FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338299] udlfb: vid_17e9&pid_4107&rev_0129 driver's dlfb_data struct at ffff880117e59000Oct 12 17:51:36 iospc2 kernel: [ 2315.338303] udlfb: console enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338306] udlfb: fb_defio enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338309] udlfb: shadow enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338468] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04Oct 12 17:51:36 iospc2 kernel: [ 2315.338473] udlfb: DL chip limited to 1500000 pixel modesOct 12 17:51:36 iospc2 kernel: [ 2315.338565] udlfb: allocated 4 65024 byte urbsOct 12 17:51:36 iospc2 kernel: [ 2315.343592] hid-generic 0003:17E9:4107.0009: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 17:51:36 iospc2 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 17:51:36 iospc2 mtp-probe: bus: 2, device: 6 was not an MTP deviceOct 12 17:51:36 iospc2 kernel: [ 2315.426583] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.426589] udlfb: Reallocating framebuffer. Addresses will change!Oct 12 17:51:36 iospc2 kernel: [ 2315.428338] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.428343] udlfb: set_par mode 1366x768Oct 12 17:51:36 iospc2 kernel: [ 2315.430620] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory Okay, that's looks more promising but still only blackout on the external screen... And yes, due to my previous modifications I swapped the blacklisted kernel modules: $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udlblacklist udl#blacklist udlfb Silly me! Okay, back to the original situation in which udl is allowed and udlfb blacklisted. Now, the logging looks similar to this and the screen shows those maroon-brown and azure-blue horizontal bars as described on other online resources. Oct 15 21:27:23 iospc2 kernel: [80934.308238] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 15 21:27:23 iospc2 kernel: [80934.420244] usb 2-4: device descriptor read/64, error -32Oct 15 21:27:24 iospc2 kernel: [80934.660822] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 15 21:27:24 iospc2 kernel: [80934.660832] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 15 21:27:24 iospc2 kernel: [80934.660838] usb 2-4: Product: e1649FwuOct 15 21:27:24 iospc2 kernel: [80934.660844] usb 2-4: Manufacturer: DisplayLinkOct 15 21:27:24 iospc2 kernel: [80934.660850] usb 2-4: SerialNumber: FJBD7HA000778Oct 15 21:27:24 iospc2 kernel: [80934.663391] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 15 21:27:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 15 21:27:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 15 21:27:25 iospc2 kernel: [80935.742407] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 15 21:27:25 iospc2 kernel: [80935.834403] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 15 21:27:25 iospc2 kernel: [80935.834416] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 15 21:27:25 iospc2 kernel: [80935.836389] usbcore: registered new interface driver udlOct 15 21:27:25 iospc2 kernel: [80936.021458] [drm] write mode info 153 Next, it's time to enable the display for our needs... This can be done either via UI or console, just as you'd prefer it. Adding the external USB display under Linux isn't an issue after all... Settings Manager => Display Personally, I like the console. With the help of xrandr we get the screen identifier first $ xrandrScreen 0: minimum 320 x 200, current 3200 x 1080, maximum 32767 x 32767LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm...DVI-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm   1366x768       60.0*+ and then give it the usual shot with auto-configuration. Let the system decide what's best for your hardware... $ xrandr --output DVI-0 --off$ xrandr --output DVI-0 --auto And there we go... Cloned output of main display: New kernel, new display... The external USB display works out-of-the-box with a Linux kernel > 3.9.0. Despite of a good number of resources it is absolutely not necessary to create a Device or Screen section in one of Xorg.conf files. This information belongs to the past and is not valid on kernel 3.9 or higher. Same hardware but Windows 8 Of course, I wanted to know how the latest incarnation from Redmond would handle the new hardware... Flawless! Most interesting aspect here: I did not use the driver installation medium on purpose. And I was right... not too long afterwards a dialog with the EULA of DisplayLink appeared on the main screen. And after confirmation of same it took some more seconds and the external USB monitor was ready to rumble. Well, and not only that one... but see for yourself. This time Windows 8 was the easiest solution after all. Resume I can highly recommend this type of hardware to anyone asking me. Although, it's dimensions are 15.6" it is actually lighter than my Samsung Galaxy Tab 10.1 and it still fits into my laptop bag without any issues. From now on... no more single screen while developing software on the road!

    Read the article

  • Cocos2d-xna memory management for WP8

    - by Arkiliknam
    I recently upgraded to VS2012 and try my in dev game out on the new WP8 emulators but was dismayed to find out the emulator now crashes and throws an out of memory exception during my sprite loading procedure (funnily, it still works in WP7 emulators and on my WP7). Regardless of whether the problem is the emulator or not, I want to get a clear understanding of how I should be managing memory in the game. My game consists of a character whom has 4 or more different animations. Each animation consists of 4 to 7 frames. On top of that, the character has up to 8 stackable visualization modifications (eg eye type, nose type, hair type, clothes type). Pre memory issue, I preloaded all textures for each animation frame and customization and created animate action out of them. The game then plays animations using the customizations applied to that current character. I re-looked at this implementation when I received the out of memory exceptions and have started playing with RenderTexture instead, so instead of pre loading all possible textures, it on loads textures needed for the character, renders them onto a single texture, from which the animation is built. This means the animations use 1/8th of the sprites they were before. I thought this would solve my issue, but it hasn't. Here's a snippet of my code: var characterTexture = CCRenderTexture.Create((int)width, (int)height); characterTexture.BeginWithClear(0, 0, 0, 0); // stamp a body onto my texture var bodySprite = MethodToCreateSpecificSprite(); bodySprite.Position = centerPoint; bodySprite.Visit(); bodySprite.Cleanup(); bodySprite = null; // stamp eyes, nose, mouth, clothes, etc... characterTexture.End(); As you can see, I'm calling CleanUp and setting the sprite to null in the hope of releasing the memory, though I don't believe this is the right way, nor does it seem to work... I also tried using SharedTextureCache to load textures before Stamping my texture out, and then clearing the SharedTextureCache with: CCTextureCache.SharedTextureCache.RemoveAllTextures(); But this didn't have an effect either. Any tips on what I'm not doing? I used VS to do a memory profile of the emulation causing the crash. Both WP7.1 and WP8 emulators peak at about 150mb of usage. WP8 crashes and throws an out of memory exception. Each customisation/frame is 15kb at the most. Lets say there are 8 layers of customisation = 120kb but I render then onto one texture which I would assume is only 15kb again. Each animation is 8 frames at the most. That's 15kb for 1 texture, or 960kb for 8 textures of customisation. There are 4 animation sets. That's 60Kb for 4 sets of 1 texture, or 3.75MB for 4 sets of 8 textures of customisation. So even if its storing every layer, its 3.75MB.... no where near the 150mb breaking point my profiler seems to suggest :( WP 7.1 Memory Profile (max 150MB) WP8 Memory Profile (max 150MB and crashes)

    Read the article

  • Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

    - by Alexandr Kurilin
    My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

    Read the article

  • Silverlight Cream for April 16, 2010 -- #838

    - by Dave Campbell
    In this Issue: Alan Beasley(-2-, -3-, -4-, -5-), Brian, Rishi, Pete Brown, Yavor Georgiev, and David Anson. Shoutouts: As usual, Tim Heuer has all the scoop on all the hot-off-the-presses releases: Silverlight 4 released. Availability of tools announcement. He covers all the main parts of interest. Tim Heuer also discusses Backward Compatibility with Silverlight 4 applications And before you ask, Tim Heuer announced the Silverlight Client for Facebook updated for Silverlight 4 release If you're having trouble with the install, Peter Bromberg has a post up to help bail you out: Get Silverlight 4 Installed: Tips and Tricks Christian Schormann has a link to probably the fastest intro to SketchFlow I've seen: Video: SketchFlow in 90 seconds, with Jon Harris Chris Rouw has a Summary of Silverlight at DevConnections on his site. I had the opportunity to spend some time with Chris and we had some good discussions. Rene Schulte describes how to get started with the new final Silverlight 4 RTW build and announces that he updated his samples and open source projects. He also shares what he wishes for the next Silverlight version: Silverlight 4 Up and Running From SilverlightCream.com: Building Better Buttons in Expression Blend and Silverlight I generally end up missing articles embedded at CodeProject, so Alan Beasley emailed me a link to these, they were new to me. In this first one, he's got a very nice tutorial up on making some awesome buttons in Expression Blend Arcade Button in Expression Blend and Silverlight Alan Beasley's second Expression Blend Button tutorial is the classic 'arcade button' ... this is great stuff.. check it out. Picture Frame Control in Expression Blend and Silverlight I wasn't going to do the full list Alan Beasley had sent me in one post, but they're all so good! This third takes an excursion away from buttons to do a Picture Frame control. Styled to the max, and another great Blend tutorial! The last building buttons article (Part1), in Expression Blend and Silverlight Alan Beasley finishes what may be a definitive work on buttons in Blend... even if you don't want to follow the tutorials (and why wouldn't you??) ... he's got 10 buttons you can download! ListBox Styling (Part1-ScrollBars) in Expression Blend & Silverlight In Alan Beasley's 5th post at Code Project, He has a great long tutorial on Styling Listbox Scrollbars in Expression Blend ... the ScrollBars are Part 1 of a series. Some Notes on DRM in Silverlight 4 Brian at Silverlight SDK has a post up on DRM ... WMDRM and PlayReady. If you're planning on utilizing this, Brian's post looks like a good starting point. nRoute: Now, More Wholesome Rishi has a detailed post up explaining the latest nRoute release now supporting Silverlight 4, WP7, and WPF. What a piece of work! Scanning an Image from Silverlight 4 using WIA Automation Pete Brown demonstrates using VS2010 and SL4 to lash up to his scanner. Lots of code and external links... all good stuff, Pete! Dealing with those pesky WCF CommunicationException “NotFound” errors in Silverlight Yavor Georgiev has a quick post up discussing WCF CommunicationException errors in Silverlight with a couple external links to explain the solution. New Silverlight 4 Toolkit released with today's Silverlight 4 RTW! David Anson blogged about the new Toolkit release that is live right now along with the Silverlight 4 Release, and has some release notes up on the Toolkit. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Improving performance of a particle system (OpenGL ES)

    - by Jason
    I'm in the process of implementing a simple particle system for a 2D mobile game (using OpenGL ES 2.0). It's working, but it's pretty slow. I start getting frame rate battering after about 400 particles, which I think is pretty low. Here's a summary of my approach: I start with point sprites (GL_POINTS) rendered in a batch just using a native float buffer (I'm in Java-land on Android, so that translates as a java.nio.FloatBuffer). On GL context init, the following are set: GLES20.glViewport(0, 0, width, height); GLES20.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); GLES20.glEnable(GLES20.GL_CULL_FACE); GLES20.glDisable(GLES20.GL_DEPTH_TEST); Each draw frame sets the following: GLES20.glEnable(GLES20.GL_BLEND); GLES20.glBlendFunc(GLES20.GL_ONE, GLES20.GL_ONE_MINUS_SRC_ALPHA); And I bind a single texture: GLES20.glActiveTexture(GLES20.GL_TEXTURE0); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, textureHandle); GLES20.glUniform1i(mUniformTextureHandle, 0); Which is just a simple circle with some blur (and hence some transparency) http://cl.ly/image/0K2V2p2L1H2x Then there are a bunch of glVertexAttribPointer calls: mBuffer.position(position); mGlEs20.glVertexAttribPointer(mAttributeRGBHandle, valsPerRGB, GLES20.GL_FLOAT, false, stride, mBuffer); ...4 more of these Then I'm drawing: GLES20.glUniformMatrix4fv(mUniformProjectionMatrixHandle, 1, false, Camera.mProjectionMatrix, 0); GLES20.glDrawArrays(GLES20.GL_POINTS, 0, drawCalls); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, 0); My vertex shader does have some computation in it, but given that they're point sprites (with only 2 coordinate values) I'm not sure this is the problem: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform mat4 u_ProjectionMatrix; attribute vec4 a_Position; attribute float a_PointSize; attribute vec3 a_RGB; attribute float a_Alpha; attribute float a_Burn; varying vec4 v_Color; void main() { vec3 v_FGC = a_RGB * a_Alpha; v_Color = vec4(v_FGC.x, v_FGC.y, v_FGC.z, a_Alpha * (1.0 - a_Burn)); gl_PointSize = a_PointSize; gl_Position = u_ProjectionMatrix * a_Position; } My fragment shader couldn't really be simpler: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform sampler2D u_Texture; varying vec4 v_Color; void main() { gl_FragColor = texture2D(u_Texture, gl_PointCoord) * v_Color; } That's about it. I had read that transparent pixels in point sprites can cause issues, but surely not at only 400 points? I'm running on a fairly new device (12 month old Galaxy Nexus). My question is less about my approach (although I'm open to suggestion) but more about whether there are any specific OpenGL "no no's" that have leaked into my code. I'm sure there's GL master out there facepalming right now... I'd love to hear any critique.

    Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >