Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 75/1080 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Do I need to be worried about these SMART drive temperatures?

  - by Steve Lorimer

  I have 5 hard drives in a machine sitting in a cupboard. /dev/sda is a 500GB Seagate drive, and is the boot disk. /dev/sd{b,c,d,e} are 2TB drives in a raid6 configuration. smartctl is showing significantly higher temperatures (like ~140 degrees celsius) on the raid drives than the boot drive. Do I need to be worried? /dev/sdb and /dev/sde are new Western Digital Black drives (new=1 week) /dev/sdc and /dev/sdd are 5 year old Hitachi drives /dev/sda [SAT], Temperature_Celsius changed from 40 to 39 /dev/sdc [SAT], Temperature_Celsius changed from 142 to 146 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 142 /dev/sdd [SAT], Temperature_Celsius changed from 142 to 146 /dev/sda [SAT], Airflow_Temperature_Cel changed from 61 to 62 /dev/sda [SAT], Temperature_Celsius changed from 39 to 38 /dev/sde [SAT], Temperature_Celsius changed from 107 to 108 /dev/sdb [SAT], Temperature_Celsius changed from 108 to 109 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sda [SAT], Airflow_Temperature_Cel changed from 62 to 61 /dev/sda [SAT], Temperature_Celsius changed from 38 to 39 Update: Adding detailed drive information as per request: /dev/sda =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: 5VV47HXA LU WWN Device Id: 5 000c50 02aad5ad6 Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdb =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1398726 LU WWN Device Id: 5 0014ee 003b8bd25 Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdc =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WSTUD LU WWN Device Id: 5 000cca 369cc9f5d Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdd =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WST4D LU WWN Device Id: 5 000cca 369cc9f48 Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sde =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1483782 LU WWN Device Id: 5 0014ee 3002d235c Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled

  Read the article

• copying link id to an input field

  - by zurna

  The code works fine when links are images. But I have a problem when there are flash movies. Another page opens with undefined in the address bar when it needs to copy the link id to imagesID input box. <script type="text/javascript"> var $input = $("#imagesID"); // <-- your input field $('a.thumb').click(function() { var value = $input.val(); var id = $(this).attr('id'); if (value.match(id)) { value = value.replace(id + ';', ''); } else { value += id + ';'; } $input.val(value); }); </script> <ul class="thumbs"> <li> <a class="thumb" id="62"> <img src="/FLPM/media/images/2A9L1V2X_sm.jpg" alt="Dock" id="62" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=62" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="61"> <img src="/FLPM/media/images/0E7Q9Z0C_sm.jpg" alt="Desert Landscape" id="61" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=61" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="60"> <img src="/FLPM/media/images/8R5D7M8O_sm.jpg" alt="Creek" id="60" class="floatLeft" /> </a> <br /> <a href="?Process=&IMAGEID=60" class="thumb"><span class="floatLeft">DELETE</span></a> </li> <li> <a class="thumb" id="59"> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://active.macromedia.com/flash4/cabs/swflash.cab#version=4,0,0,0" id="59" width="150" height="100" style="float:left; border:5px solid #CCCCCC; margin:5px 10px 10px 0;"> <param name="scale" value="exactfit"> <param name="AllowScriptAccess" value="always" /> <embed name="name" src="http://www.refinethetaste.com/FLPM/media/flashes/7P4A6K7M.swf" quality="high" scale="exactfit" width="150" height="100" type="application/x-shockwave-flash" AllowScriptAccess="always" pluginspage="http://www.macromedia.com/shockwave/download/index.cgi? P1_Prod_Version=ShockwaveFlash"> </embed> </object> </a> <br /> <a href="?Process=&IMAGEID=59" class="thumb"><span class="floatLeft">DELETE</span></a> </li> </ul>

  Read the article

• grep 5 seconds of input from the serial port inside a shell-script

  - by pica

  I've got a device that I'm operating next to my PC and as it runs it's spitting log lines out it's serial port. I have this wired to my PC and I can see the log lines fine if I'm using either minicom or something like: ttylog -b 115200 -d /dev/ttyS0 I want to write 5 seconds of the device serial output to a temp file (or assign it to a variable) and then later grep that file for keywords that will let me know how the device is operating. I've already tried redirecting the output to a file while running the command in the background, and then sleeping 5 seconds and killing the process, but the log lines never get written to my temp file. Example: touch tempFile ttylog -b 115200 -d /dev/ttyS0 >> tempFile & serialPID=$! sleep 5 #kill ${serialPID} #does not work, gets wrong PID killall ttylog cat tempFile The file gets created but never filled with any data. I can also replace the ttylog line with: ttylog -b 115200 -d /dev/ttyS0 |tee -a tempFile & In neither case do I ever see any log lines logged to stdout or the log file unless I have multiple versions of ttylog running by mistake (see commented out line, D'oh). I have no idea what's going on here. It seems to be a failure of redirection within my script. Am I on the right track? Is there a better way to sample 5 seconds of the serial port?

  Read the article

• Java ME scorecard with vector and multiple input fields/screens

  - by proximity

  I have made a scorecard with 5 holes, for each a input field (shots), and a image is shown. The input should be saved into a vector and shown on each hole, eg. hole 2: enter shots, underneath it "total shots: 4" (if you have made 4 shots on hole 1). In the end I would need a sum up of all shots, eg. Hole 1: 4 Hole 2: 3 Hole 3: 2 ... Total: 17 Could someone please help me with this task? { f = new Form("Scorecard"); d = Display.getDisplay(this); mTextField = new TextField("Shots:", "", 2, TextField.NUMERIC); f.append(mTextField); mStatus = new StringItem("Hole 1:", "Par 3, 480m"); f.append(mStatus); try { Image j = Image.createImage("/hole1.png"); ImageItem ii = new ImageItem("", j, 3, "Hole 1"); f.append(ii); } catch (java.io.IOException ioe) {} catch (Exception e) {} f.addCommand(mBackCommand); f.addCommand(mNextCommand); f.addCommand(mExitCommand); f.setCommandListener(this); Display.getDisplay(this).setCurrent(f); } public void startApp() { mBackCommand = new Command("Back", Command.BACK, 0); mNextCommand = new Command("Next", Command.OK, 1); mExitCommand = new Command("Exit", Command.EXIT, 2); } public void pauseApp() { } public void destroyApp(boolean unconditional) { } public void commandAction(Command c, Displayable d) { if (c == mExitCommand) { destroyApp(true); notifyDestroyed(); } else if ( c == mNextCommand) { // -> go to next hole input! save the mTextField input into a vector. } } } ------------------------------ Full code --------------------------------- import java.util.; import javax.microedition.midlet.; import javax.microedition.lcdui.*; public class ScorerMIDlet extends MIDlet implements CommandListener { private Command mExitCommand, mBackCommand, mNextCommand; private Display d; private Form f; private TextField mTextField; private Alert a; private StringItem mHole1; private int b; // repeat holeForm for all five holes and add the input into a vector or array. Display the values in the end after asking for todays date and put todays date in top of the list. Make it possible to go back in the form, eg. hole 3 - hole 2 - hole 1 public void holeForm(int b) { f = new Form("Scorecard"); d = Display.getDisplay(this); mTextField = new TextField("Shots:", "", 2, TextField.NUMERIC); f.append(mTextField); mHole1 = new StringItem("Hole 1:", "Par 5, 480m"); f.append(mHole1); try { Image j = Image.createImage("/hole1.png"); ImageItem ii = new ImageItem("", j, 3, "Hole 1"); f.append(ii); } catch (java.io.IOException ioe) {} catch (Exception e) {} // Set date&time in the end long now = System.currentTimeMillis(); DateField df = new DateField("Playing date:", DateField.DATE_TIME); df.setDate(new Date(now)); f.append(df); f.addCommand(mBackCommand); f.addCommand(mNextCommand); f.addCommand(mExitCommand); f.setCommandListener(this); Display.getDisplay(this).setCurrent(f); } public void startApp() { mBackCommand = new Command("Back", Command.BACK, 0); mNextCommand = new Command("OK-Next", Command.OK, 1); mExitCommand = new Command("Exit", Command.EXIT, 2); b = 0; holeForm(b); } public void pauseApp() {} public void destroyApp(boolean unconditional) {} public void commandAction(Command c, Displayable d) { if (c == mExitCommand) { destroyApp(true); notifyDestroyed(); } else if ( c == mNextCommand) { holeForm(b); } } }

  Read the article

• [Android] Change language settings (locale) for the device

  - by raychenon

  Hi, I know it's possible to have multiple languages in a single application through the res/string and depending on Locale. Here is a case http://stackoverflow.com/questions/2078289/android-controling-the-user-language Now how can I change the language in the phone ? Like I'd do by Menu Settings Language & Keyboard Select locale languages Is there some real code to access to these settings ? Or should I create intent for a shortcut to the language settings. Please post some code Edit : With Locale class developer.android.com/intl/fr/reference/java/util/Locale.html The constructor is at least Locale(String language) The input is language. How can you retrieve the current language used on the device ?

  Read the article

• Hide/ change width/ change position of UIButton based on device type

  - by Giles Van Gruisen

  I'm using the new in-app SMS features in my iPhone app, but obviously iPod Touches aren't able to send and receive SMS without support of a third party app. I know all well how to detect the device and how to hide a UIButton, but what I do not know is how to change the width of the others. Above are the three icons. The one on the far rights needs to be hidden on an iPod Touch, and the other two need to adjust size/ position to fill the remaining space. Any tips on programatically changing the position and width of a UIButton is greatly appreciated. Thanks!

  Read the article

• How to manually check a YUI radio "button".

  - by alex

  <script type="text/javascript"> (function () { var ButtonGroup = YAHOO.widget.ButtonGroup; var onCheckedButtonChange = function (p_oEvent) { }; YAHOO.util.Event.onContentReady("mediaFilterButtonsFieldset", function () { var oButtonGroup = new ButtonGroup("mediaFilterButtons"); oButtonGroup.on("checkedButtonChange", onCheckedButtonChange); }); }()); </script> <div id="resultInfo"> <form id="button-example-form" name="button-example-form" method="post"> <fieldset id="mediaFilterButtonsFieldset"> <div id="mediaFilterButtons" class="yui-buttongroup ie7filter" style="z-index:11;"> <div id="mediaFilterLabel">Go to</div> <input id="radio1" class="filter_but" type="radio" name="0" value="First" checked rel="0" > <input id="radio2" class="filter_but" type="radio" name="2" value="Second" rel="2"> <input id="radio3" class="filter_but" type="radio" name="1" value="Third" rel="1"> </div> </fieldset> </form> </div> These are my YUI buttons. They're just 3 radio buttons turned into "buttons"--literally. My question is this: After people click the third button, I cannot manually check the first button anymore. How can I manually check "radio1"? I tried JQuery: $("#radio1").attr("checked",true); But this didn't work. The third button still remained pressed down.

  Read the article

• Can't get iPhone device token

  - by d.andreykiv

  Hi. I'm trying to get iPhone device token using following code - (void)applicationDidFinishLaunching:(UIApplication *)application { // Override point for customization after app launch [window addSubview:viewController.view]; [window makeKeyAndVisible]; NSLog(@"Registering for push notifications..."); [application registerForRemoteNotificationTypes:UIRemoteNotificationTypeBadge|UIRemoteNotificationTypeAlert]; } - (void)application:(UIApplication *)application didRegisterForRemoteNotificationsWithDeviceToken:(NSData *)newDeviceToken { NSLog(@"Registered!@@"); } - (void)application:(UIApplication *)application didFailToRegisterForRemoteNotificationsWithError:(NSError *)error { NSLog(@"application:didFailToRegisterForRemoteNotificationsWithError: %@", error); if ([error code] != 3010) // 3010 is for the iPhone Simulator { // show some alert or otherwise handle the failure to register. } } but only getting "2010-04-02 18:23:35.434 Untitled[3133:207] Registering for push notifications..." What I was doing wrong?

  Read the article

• Mobile Device emulator cannot access localhost

  - by Diana

  I am using Windows Mobile 6 Professional Emulator and Windows Mobile Device Center. I connected and cradled the emulator to my computer. I am trying to connect from the browser of the emulator to a webservice that is deployed in the IIS of my computer (same machine where the emulator is installed). If I connect my computer to the internet, I can access any website, including my local WS (using the IP returned by ipConfig). The problem is when I disconnect the computer from the Internet: I cannot access my local web service using the IP (internal one returned by ipconfig), or machine name. Do you have any ideea what settings am I missing? I am sure this it's possible somehow, I just don't know how... PS: The goal is to access the WS from a mobile application, but until I cannot access it from the browser, I cannot access it from the application either. Thank you!

  Read the article

• iPhone: Using static library in an application crashes the device but not the iphone simulator

  - by spin-docta

  I have a library I made, and now I want to utilize it in an application. I've believe I've properly linked to the library. Here are all the things I've done: Set the header search path Set other linker flags to "-ObjC" Added the static library xcode project Made sure the lib.a was listed as a framework target Added the library as a direct dependency Like I said in the title, I've successfully run the app with the static library in the simulator. Once I try testing the app using the device, it crashes the second it has to use a function from the library: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** +[NSDate firstOfCurrentMonth]: unrecognized selector sent to class 0x3841bb44' 2009-10-10 12:45:31.159 Basement[2372:207] Stack:

  Read the article

• Device driver with generic communication media layer

  - by Tom

  Greetings all, I'm trying to implement driver for an embedded device with generic communication media layer. Not sure what is the best way to do it so I'm seeking an advice from more experienced stackoverflow users:). Basically we've got devices around the country communicating with our head office. Usual form of communication is over TCP/IP, but could be also using usb, RF dongle, IR, etc. The plan is to have object corresponding with each of these devices, handling the proprietary protocol on one side and requests/responses from other internal systems on the other. The thing is how create something generic in between the media and the handling objects. I had a play around with the TCP dispatcher using boost.asio but trying to create something generic seems like a nightmare :). Anybody tried to do something like that? What is the best way how to do it? Cheers, Tom

  Read the article

• Brainstorming - MIDI over LAN

  - by Hunter Bridges

  I'm planning out a summer coding project for myself. I work with a lot of MIDI and have been researching it a lot. I know it's an old technology, but it works with a lot of music hardware/software so in my eyes, it's still viable. Anyway, I haven't ever worked with writing drivers or anything, so I don't know where I would start with this. So, provided I have MIDI data already being sent over LAN to a server (I know how to do that part), what steps would it take for the server to channel those received messages to an emulated MIDI device, that could then be accessed in music software and so on? Also, what would it take to also send MIDI data back through the LAN to be received by the device that originally received the message? I'm not really looking for too specific a solution. Really I am just trying to come up with a game plan right now and I need to figure out where/what to research.

  Read the article

• locate the crash code from the crash log in my ip4 device

  - by lu yuan

  How could I locate the crash code from the crash log in my ip4 device? As the crashed thread 0 presents a serial frameworks and main.m, I couldn't locate the accurate code launched this crash and debug it. Any suggestion? Thanks in advance! Incident Identifier: B6BD84B7-CE0A-485D-A877-0FD0F5B75933 CrashReporter Key: b0b97a37f2a1e4911ce2ef34e1793e028463bb67 Hardware Model: iPhone3,1 Process: myApp [11615] Path: /var/mobile/Applications/28AE71F2-36CA-4A87-83D9-07DF2DFE74F1/myApp.app/myApp Identifier: myApp Version: ??? (???) Code Type: ARM (Native) Parent Process: launchd [1] Date/Time: 2012-06-09 21:12:22.792 +0800 OS Version: iPhone OS 5.1 (9B176) Report Version: 104 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000b Crashed Thread: 0 Thread 0 name: Dispatch queue: com.apple.main-thread Thread 0 Crashed: 0 libobjc.A.dylib 0x36721f78 0x3671e000 + 16248 1 MapKit 0x34e7ace6 0x34e68000 + 77030 2 CoreFoundation 0x3525f1f4 0x35247000 + 98804 3 Foundation 0x311b6740 0x31112000 + 673600 4 CoreFoundation 0x352d4acc 0x35247000 + 580300 5 CoreFoundation 0x352d4298 0x35247000 + 578200 6 CoreFoundation 0x352d303e 0x35247000 + 573502 7 CoreFoundation 0x3525649e 0x35247000 + 62622 8 CoreFoundation 0x35256366 0x35247000 + 62310 9 GraphicsServices 0x36552432 0x3654e000 + 17458 10 UIKit 0x3234ce76 0x3231b000 + 204406 11 myApp 0x0001bac0 main (main.m:16) 12 myApp 0x0001ba80 start + 32

  Read the article

• Sending SMS programmatically in 1.5 on CDMA device

  - by Justin

  I am developing an application that relies heavily on sending SMS programmatically. I followed the examples released after 1.6 that demonstrate how to use an abstract class to implement sending for 1.5 and 1.6+. I started getting complaints from some users about how it appears as though SMS should be sent but they are in fact not. It took be a while to realize what was going on, the one 1.5 test device I have is GSM. Of course it must be because the Sprint Hero is CDMA (running 1.5). Regardless of message size I use the general form of: divideMessage() and sendMultipartTextMessage(destinationAddress, null, parts, null, null) How can I successfully send an SMS in this case? Can I call sendTextMessage() a number of times? Also, I tried unsuccessfully to find the source for the Hero's Messenger/Conversations package or equivalent, if anyone knows where to find that that would be great.

  Read the article

• iPhone Table View Cell Image: Working on simulator, not showing on real device

  - by Graeme

  Hi, I have a UITable View that displays an image in the left hand side of the table cell, and it works fine in the simulator. Only problem is, once I ran it on my device no images appear. At first 3 did, but then I "cleaned headers" and now none appear. Have checked that images are added to resource folder for build (which they are) and that capitals etc. match (which they do). Any ideas? Thanks. Code to display images: cell.imageView.layer.masksToBounds = YES; cell.imageView.layer.cornerRadius = 5.0; UIImage *image = [UIImage imageNamed:[[dog types] stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]];; if ( image ) { cell.imageView.image = [image imageScaledToSize:CGSizeMake(50, 50)]; }

  Read the article

• Cannot run code on device

  - by lostInTransit

  Hi I have some source code which I had developed and later gave to another team. They signed it with their certificate and provisioning profile. Now I have the code back and have set the appropriate values in the project properties for code signing identity (with my cert and profile). But when I run the application on a device, I get an error showing the other team's certificate and prompting that the provisioning profile does not exist. I don't know where it is being referenced. Can someone please help. Thanks.

  Read the article

• NSDateFormatter incorrect date on simulator, correct date on device

  - by Rudiger

  Hi, Im building a calendar and to find out the first day of the month I do [formatter setDateFormat:@"e"]; int startDay = [[formatter stringFromDate:newDate] intValue]; On the device this works correctly and the 1st of the month is on the correct day. But on the simulator it is the day after. Although it doesn't overly matter about the simulator it is kind of driving me crazy thinking I've done something wrong. I tried to set the locale of the formatter but no difference, nor i think should it. Can anyone shed some light on this? On a side note is there a better way to build a calendar than this?

  Read the article

• python raw_input odd behavior with accents containing strings

  - by Ryan

  I'm writing a program that asks the user for input that contains accents. The user input string is tested to see if it matches a string declared in the program. As you can see below, my code is not working: code # -*- coding: utf-8 -*- testList = ['má'] myInput = raw_input('enter something here: ') print myInput, repr(myInput) print testList[0], repr(testList[0]) print myInput in testList output in eclipse with pydev enter something here: má mv° 'm\xe2\x88\x9a\xc2\xb0' má 'm\xc3\xa1' False output in IDLE enter something here: má má u'm\xe1' má 'm\xc3\xa1' Warning (from warnings module): File "/Users/ryanculkin/Desktop/delete.py", line 8 print myInput in testList UnicodeWarning: Unicode equal comparison failed to convert both arguments to Unicode - interpreting them as being unequal False How can I get my code to print True when comparing the two strings? Additionally, I note that the result of running this code on the same input is different depending on whether I use eclipse or IDLE. Why is this? My eventual goal is to put my program on the web; is there anything that I need to be aware of, since the result seems to be so volatile?

  Read the article

• Strange crashes on the iPad device with core graphics functions

  - by toastie

  I am getting a lot of strange EXC_BAD_ACCESS crashes on the iPad that only happen on the device and not in the simulator. I am assuming that they are somehow memory related, but I am not sure. They all happen with image context related functions. One strange example is using CGImageCreateWithImageInRect. For example, if i run through a bunch of UIImages and crop them with CGImageCreateWithImageInRect, it will always crash at specific arbitrary sizes. Like, if I crop them all to 200x200, it crashes out after processing 12 images. If i crop them to 210x210, it works no problem. The EXC_BAD_ACCESS happens inside of "memmove" called from "CGBlt_copyBytes". That is all the debugger shows me strangely enough. I can't see the callstack going up to any of my methods. All of this works fine in the simulator! I know this is all very vague, but if anyone has any ideas, they would be greatly appreciated.

  Read the article

• Storyboard elements are not sized properly on the device

  - by Joel Fischer

  In the storyboard, I am placing a table view element into a subclassed UIView. The element is not appearing on the iPad device I am running it on the same as it appears in the storyboard however. This also happens for additional content that I place into the storyboard. Below is a screenshot as it appears in the storyboard, as well as UI width/height information. And here is the description of the UI file running on the iPad. https://gist.github.com/4323186 (embedding it directly into the post is giving me problems) You'll notice that the tableview is explicitly set at 178 width, and is showing up in the description as 276 width. My initial thought was that perhaps a cell was forcing the parent to be larger (I'm very new to iOS UI development), but drilling into that shows the prototype cell it appears that the width is defined by it's parent at 178. The image views and label also are appearing in the incorrect spot, as shown in the second image below.

  Read the article

• Connecting to tcp server from client running in android device

  - by Andhravaala

  Hi, I am trying to connect to a standalone desktop tcp server(java) from tcp client application in android device. But I am not able to connect to that. I tried to write a desktop tcp client and tried to connect to server(remote server). It is working fine. But When I am trying to connecting from android, I am getting a IOException while creating Socket instance. Can anyone help me in this ? Thanks in advance....

  Read the article

• PerformSelectorInBackground leaking on device

  - by Oysio

  While it seems to not pose a problem on the simulator, using performSelectorInBackground on the device causes memory leaks. Or at least that's what Instruments indicates. Looking at the code I don't have a single clue what the cause could be. I tried to strip the affected code to a bare minimum but still strangely Instruments keeps showing a leak every time this piece of code is executed. Anything unusual going on here? //In viewcontrollerA: -(void)mainLoop { [self.viewControllerB performSelectorInBackground:@selector(calculateTotals) withObject:nil]; //This gives the same problem //[NSThread detachNewThreadSelector:@selector(calculateTotals) toTarget:self.viewControllerB withObject:nil]; //UI stuff ... } //viewControllerB: -(void)calculateTotals { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; //Heavy calculations ... [pool release]; }

  Read the article

• overflow hidden not working on touch device

  - by Jesper Ong

  I have a problem with overflow:hidden on a touch device. Basically I have my html and body on overflow:hidden. With a contact form outside(bottom) of the window. On clicking a button this form will animate in. This is so far working great on desktop browsers. But on touch devices, I seem to be able to scroll down and view the form. I can't seem to find solutions after much googling. Is there anyway to force overflow:hidden on touch devices? Any help much appreciated!

  Read the article

• MC75 using symbol.imaging.device libraries for program

  - by Christy

  UPDATE: I found another library in the Windows Mobile - CameraCaptureDialog - this did the job - never did figure out the zero length available devices... Hi all, I have a .net application running on a symbol mc75 (motorola) using the scanner. I am now trying to add functionality for the camera and I am running into issues. To find the 'devices' you are supposed to use the library's 'available devices' function. With the barcode it is symbol.barcode.devices.availabledevices and it returns two items (you can scan from the scanner or using the camera device) However, when I do the camera library it does not find any devices - symbol.imaging.devices.availabledevices returns 0 I can take a picture using the software on the mc75, so I know the functionality is there, I just can't figure out how to get to it programmatically.... Does anyone have any ideas? Thanks for any help!

  Read the article

• Android PixelFormat per device

  - by Tobias Domhan

  analogous to this thread: stackoverflow.com/questions/2093594/opengl-extensions-available-on-different-android-devices I would like to collect the different PixelFormats the android devices use. To find out you must do the following: Parameters camParams = camera.getParameters(); int format = camParams.getPreviewFormat(); Now you got to find the number in the following list: developer.android.com/reference/android/graphics/PixelFormat.html#A_8 How to generally open the camera is described here: developer.android.com/resources/samples/ApiDemos/src/com/example/android/apis/graphics/CameraPreview.html I'll have a start: device: T-mobile G1 / HTC Dream android: 1.6 (cyanogen mod) format: YCbCr_420_SP so what formats do your android phones use? thanks in advance :D

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >