Search Results

Search found 19832 results on 794 pages for 'on screen keyboard'.

Page 77/794 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Purple screen on boot, iMac

    - by Eugene B
    I have just installed Ubuntu 13.10 (special iMac iso found here) on the new iMac (dual boot). Installation of rEFIt was completed successfully, as well as the installation of Ubuntu itself. After the final reboot, rEFIt sees this distributive and allows the choice. When I select "Boot linux from HD", it sends me to grub screen, where I can select Ubuntu. And then it gets stuck on the purple screen (smpboot: Booting Node 0, Processors #1 -- for the recovery mode) with no further action. Does anybody know a solution to this problem? P.S.: I have also tried both 32 and 64-bit pc distributives (occasionally) with the same result.

    Read the article

  • Screen problems

    - by Erick
    I struggled a lot in order to install Ubuntu because of a problem with the video drivers caused by when installing the driver and after turning it on it just appears a black screen, which worked for me was to use the terminal with sudo setpci -s 00:02.0 F4.B=0 and the screen starts, but after rebooting the changes won't remain and I have to run that command again. My question is: How can I make the changes permanent and not to be in need to execute that command always when I shut it down? Original Question in Spanish: Problemas con pantalla He batallado mucho al instalar ubuntu por el problema con el controlador de video ya que al instalarlo al encenderla aparece solo una pantalla negra lo que me funciono fue usar desde consola sudo setpci -s 00:02.0 F4.B=0 enciende la pantalla pero al reiniciarla los cambios no se quedan guardados y tengo que volver a ejecutar ese comando mi pregunta es ¿como hacerle para que los cambios queden igual y no tener que estar ejecutando eso siempre que la apago?

    Read the article

  • Remmina remote control: black screen after XBMC exit

    - by Tinellus
    I have a HTPC (Quietpc Sidewinder Fanless media pc) running Ubuntu 12.04 and autostarting XBMC Frodo. I'm remote controlling this machine using my laptop also running Ubuntu 12.04 and using Remmina VNC as a client. Everything works perfectly as long as XBMC is running: I can see the remote screen and control via mouse and keyboard on the laptop. However, when XBMC is stopped on the HTPC, my TV shows the Ubuntu desktop normally, but the screen on the laptop turns black. I'm however still controlling the HTPC since I can see the arrow moving upon laptop mouse movement, and I can still type text in the HTPC. Oddly, when the screensaver on the HTPC kicks in, I again have a visual on the laptop. Anyone any thoughts on this? What should I do to maintain visual after stopping XBMC? Any suggestions much appreciated. Thanks!

    Read the article

  • Few problems on Dell xps 15 L502 (screen brightness ,blutooth,wi-fi power management problems)

    - by Web-E
    I am running ubuntu 11.10 32bit in my dell xps L502. Working good except few problems. Blue tooth always turned on reboot,I would like to turn it off always. Screen brightness is not saved.Every time I reboot, the screen goes back to full brightness.How to save that? and the most important problem is internet speed through wi-fi is really very slow when operating on battery.the card is intel centrino Advanced-N 1030 with integrated blue tooth. Any help will be appriciated... :)

    Read the article

  • Change login screen to gnome-shell login

    - by Dr_Bunsen
    I was just goofing around in a vm to test what would happen if I purgen unity: sudo apt-get remove --purge unity* I found that I get an startup error, but when I proceed, I got this awesome login screen: It has an sexy effect and is just the gnome style my whole pc has got. So can any one please tell me how I change the default login screen program without having to bother clicking "fix this error" on every boot? Thanks in advance. [edit] This is the error I get, and the only option that works is the, run in low settings for one session.

    Read the article

  • Live CD boot/installation problem, blank screen - 12.04

    - by traubi
    I'm trying to install ubuntu-12.04-desktop-amd64 from my usb stick. When booting from usb I instantly get a blank screen (with a grey box at the left bottom) I checked the live system with my laptop.works well except it also starts of with a black screen and a grey box at the bottom. I figure the Problem is my geforce gtx 570 since older versions of Ubuntu where only able to boot with xforcevesa and nomodeset. Unfortunately I can't change the boot parameters. I tried the alternate version for a text based install, but it has the same problem. If I press Esc in the alternate I get a message box with two buttons but no text. I would be happy for any advice on this matter

    Read the article

  • Black Screen When Booting From .VDI Image

    - by GTyler
    I have cloned a VirtualBox machine, which runs Ubuntu 11.04 32-bit as Guest OS. I now wish to transfer it to a new host machine running Windows Vista 32-bit. I’ve transferred the .vdi file and adjusted the name and memory. However when I boot it, the options to choose the Linux version came up: Ubuntu, with Linux 2.6.38-10-generic, Linux 2.6.38-10-generic(recovery mode) , Previous Linux versions, Memory test. Once I chose Linux 2.6.38 a black screen just appears with an underscore at the top. What should I do to get it to run? I don’t have my original machine near me now so I can only work with my .vdi image. My VB is version 4.0.10. I have tried cloning this VDI and also assigning a new UUID and making a new guest, but I still got the black screen. Thank you.

    Read the article

  • Ubuntu Splash Screen Customization

    - by Galaxy7
    I wanted to know how to customize the splash screen in Ubuntu 13. I have tried to install Plymouth Manager but when I run sudo apt-get update it says it was unable to fetch http://ppa.launchpad.net/mefrio-g/plymouthmanager/ubuntu/dists/raring/main/binary-i386/Packages. I opened the address in Firefox but it didn't open. Also I would like to know where the files for the Ubuntu Logo, Splash Screen Background, etc. are located (to customize them). In previous versions they were located at usr/share/images. I am running Ubuntu 13 Raring Ringtail on VMWare Player. The host is an Acer 5600U running Windows 8. Thnx.

    Read the article

  • All video players display black screen.

    - by Dennis
    I'm working in 10.04 Lucid. All my video players (Movie Player and VLC) and the preview windows in editors (OpenShot and Pitivi) will only display a black screen when playing a video. The sound is fine and the videos work fine on other computers. I have tried multiple formats from varying sources .MOV taken from old ffmpeg projects, .AVI straight from a camera, .MP4 using h.264 from OpenShot on another system, .OGV from a gtk-recordmydesktop session on this very computer. I even get a pure black screen in the viewer when starting a remote session in VNC. This box has a GeForce 8400 GS using the Nvidia drivers in case it may be a card problem or setting.

    Read the article

  • Can not get to login screen, background starts with terminal prompt only

    - by Doug
    my uncle has Ubuntu on his work PC. Basically I came in to work today, and he had lost his UNITY side bar. I told him start with just rebooting it. He rebooted it... now it does not even get to the login screen. It gets to the background with the word UBUNTU, and the 6 or 7 dots, does it's little loading dot thing... then stops, and a black terminal opens on the top left with the background still in place. Personally, I think he screwed it up himself. He always swears he didn't touch anything, but I know better... Either way, I can't get him back into the desktop to even see if the sidebar is back. He's always screwing around pressing the wrong buttons on the login screen, hitting admin things and such... Any ideas?

    Read the article

  • Black screen after select installing on a Dell Inspiron 14z

    - by Rodrigo
    I'm trying to do a dual boot on my Dell Inspiron 14z notebook, but I always get a black screen after selecting Install Ubuntu. I've tried to add nomodeset and acpi_osi="Linux" to the boot options, but it doesn't change anything. The hardware: 3rd Generation Intel® Core™ i7-3517U processor (4M Cache, up to 3.0 GHz) 8GB2 Dual Channel DDR3 SDRAM at 1600MHz 500GB 5400 RPM SATA HDD and 32GB mSATA SSD AMD Radeon HD7570M 1GB This question isn't duplicated. I've already tested all tips in the following question! My computer boots to a black screen, what options do I have to fix it?

    Read the article

  • XNA frame rate spikes in full screen mode

    - by ProgrammerAtWork
    I'm loading a simple texture and rotating it in XNA, and this works. But when I run it in full screen 1920x1080 mode I see spikes while my texture is rotating. If I run it windowed with 1920x1080 resolution, I don't get the spikes. The size of the texture does not seem to matter, I tried 512 texture size and 2048 texture size, same thing happens. Spikes in full screen, no spikes in windowed, resolution does not seem to matter, Debug or Release does not seem to do anything either. Anyone got ideas of what could be the problem? Edit: I think this problem has something to do with the vertical retrace. Set this property: _graphicsDeviceManager.SynchronizeWithVerticalRetrace = false; you'll lose vsync but it will not stutter.

    Read the article

  • Multitouch screen needs two touch points

    - by BloodPhilia
    So, I got a netbook (Some weird China brand) and it has a multitouch screen. I got to installing Ubuntu Netbook 10.10 and I used the mouse and keyboard for that. When I wanted to try the touchscreen, at first it didn't seem to work, then I tried to multitouch, and this is what happens: I put my finger on point A I put my finger on point B, while still holding point A. The cursor now jumps to the location on the screen where point A is touched. I can now use point A to drag the cursor ONLY when holding point B. I can use point B for clicking by tapping, but ONLY when holding point A at the place I want to click. What is going on?

    Read the article

  • 12.10 upgrade broke brightness keys [closed]

    - by Chris Morgan
    I have been running Ubuntu (64-bit) on my HP 6710b laptop (Core 2 Duo with integrated graphics) for several years, and the backlight brightness keys have always worked. Since I upgraded to Ubuntu 12.10 earlier today, those keys do not work any more. The secondary function keys: Fn+F3: sleep; still works (and considerably faster than ever before!) Fn+F8: battery info; still works Fn+F9: reduce brightness; stopped working in 12.10 Fn+F10: increase brightness; stopped working in 12.10 It may also be worth while mentioning that X does not appear to be receiving the brightness events at all, or at least not sending them out further. (This I detected with a key logger I wrote for a Uni project, which uses X's Record extension; it is informed of the sleep and battery info keystrokes, but doesn't receive the brightness ones at all.) In the mean time, I know that I can use the Brightness & Lock settings screen to alter the brightness. (Wow! I can suddenly make my backlight darker than I could before—I can go right down to turning the backlight off, something I couldn't do before... but this model has a fairly dim screen, so I don't expect to use that much, if ever.) How can I get the brightness keys working again? This question is probably strongly related to I can't control my Brightness in HP Compaq 6710s.

    Read the article

  • DockbarX inside AWN, preview window shifted on dual-screen after shifting from single-screen.

    - by naaronne
    I've been running dockbarx in AWN for sometime now. I started using dual-screens and started seeing a problem with the window preview. When I hover over the dockbarx icon to see the preview it appears on the other monitor. I'm assuming that this is due to it still thinking there is only one monitor. I was hoping someone new of a gconf-editor setting that I could set with the rest of my screen that changes my laptop from internal monitor to my dual-screen setup. Thanks in advance.

    Read the article

  • Ubuntu 13.10 won't boot and hangs on a black screen

    - by Anonymous John
    I installed Ubuntu 13.10 64-bit today and I sat on the internet most of the day after installation. I shut the computer down and went bowling with my family. When I came back, I turned on my computer and it came to the boot screen as usual, but then the screen went black and stayed black. Can this be solved or do I have to install Ubuntu 13.04. My dad does not know about this and I do not want to get yelled at for an hour, so I need an answer before midnight mountain time, otherwise I will install Ubuntu 13.04 so I won't get yelled at in the morning.Thanks to anyone who answers this.

    Read the article

  • Ubuntu 12.10 desktop/interface not showing on VirtualBox VM after login screen

    - by Jake
    I'm having some trouble with getting my Ubuntu to work on a VirtualBox VM. I made a clean installation of Ubuntu 12.10 on a VM without any errors. I arrive at the login screen, as soon as I press enter it does it's little loading thingy and then screen goes black, then this is all I get: http://i.imgur.com/zULUI.jpg I can access the terminal and pretty much all the other features through it, but I would like to have the GUI properly working. I've been looking around the web and looking at various fixes to similar problems, but can't seem to get it to work. I'm thinking this problem might have to do with the graphics? I'm running Windows 8 Pro as host, if that helps, might be some compatibility issues with VirtualBox in W8... Thanks in advance!

    Read the article

  • Make objects slide across the screen in random positions

    - by user3475907
    I want to make an object appear randomly at the right hand side of the screen and then slide across the screen and disapear at the left hand side. I am working with libgdx. I have this bit of code but it makes items fall from the top down. Please help. public EntityManager(int amount, OrthoCamera camera) { player = new Player(new Vector2(15, 230), new Vector2(0, 0), this, camera); for (int i = 0; i < amount; i++) { float x = MathUtils.random(0, MainGame.HEIGHT - TextureManager.ENEMY.getHeight()); float y = MathUtils.random(MainGame.WIDTH, MainGame.WIDTH * 10); float speed = MathUtils.random(2, 10); addEntity(new Enemy(new Vector2(x, y), new Vector2(-0, -speed))); }

    Read the article

  • C# XNA Make rendered screen a texture2d

    - by redcodefinal
    I am working on a cool little city generator which makes cities in the isometric perspective. However, a problem arose where if the grid size was over a certain limit it would have awful lag. I found the main problem to be in the draw method. So I took the precautionary step of rendering only items that were onscreen. This fixed the lag but, not by much. The idea I have is to render the frame once and take a snapshot. Then, display that as a texture2d on screen. This way I don't have to render 1,000,000 objects every frame since they don't change anyways. TL;DR - I want to Take a snapshot of an already rendered frame Turn it into a Texture2D Render that to the screen instead of all the objects. Any help appreciated.

    Read the article

  • Lubuntu notifications extend off screen

    - by cbojar
    I just installed a fresh Lubuntu 12.04. When notifications pop up in the corner, longer ones seem to extend off-screen and get cut off. Shorter ones do not have this problem (I'm assuming they draw from a fixed corner at top left and dynamically extend). My screen resolution is correct and no other applications seem to have this problem. I've even changed the resolution and the problem persists (at both resolutions). Is there any way to fix this? Is there a max-width setting or something that might need adjusting?

    Read the article

  • Pendrive USB Ubuntu installation - black screen on boot

    - by ubuntico
    I see many posts on this, but no solution. I installed Ubuntu 12.04 on my 16GB USB flash drive using this official link using their tool Universal USB Installer. Installation to USB went fine so I set my laptop to boot from USB and the Ubuntu was recognized. I saw the usual boot screen and I chose option "Run Ubuntu from this USB". The boot process started and after 5-6 seconds the screen goes black and non-responsive. I thought that it hang on X loading so I tried switching to console via Ctrl+Alt+F1-6 but the system did not respond. Why is this happening? Am I doing something wrong? PS. My laptop is HP Pavillion G6

    Read the article

  • Boots to a totally blank screen after I installed some ATI Radeon card updates

    - by baboonWorksFine
    I am using Ubuntu 10.04 LTS, dual boot with win7 on ThinkPad T400, I followed Ubuntu update hints and installed some update for my ATI Radeon graphic card, but when I boot to Ubuntu(means I can still load GRUB), the tragedy happened, the screen goes to blank and no matter what key stroke, I can not get any responds, I try to go to text terminal, but impossible! However when I hit the power button, the computer would pop out the Ubuntu shutdown screen briefly and shut down. I figure out I should delete the updates package of my graphic card, but I don't even get a chance to go to text terminal, please help me!

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >