Search Results

Search found 2748 results on 110 pages for 'paste'.

Page 78/110 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

• VMware virtual machine network devices malfunctioning

  - by sheepz

  I'm running Ubuntu 10.04 LTS and VMvware workstation 7.0.1 build-227600. The virtual machine i'm running in VMware is a custom distribution built on Debian Linux version 3.1. I'm still pretty much a beginner with UNIX administration. After having messed around with the vmware (changed only the name of the folder, the vmx and and other .v* files accordingly in which the .vmx was situated, and the configuration in the vmx file accordingly), the network devices on the virtual machine do not work anymore. The virtual machine is used for securely sending messages. The virtual machine: As far as I know, this perl file called proxy-gen-ifalias eth0 is responsible for properly setting up the two virtual network devices eth0 and eth1. The Virtual machine comes with a GUI interface in which I have set up two ethernet network devices, one internal, the other external. Now, after having messed around with this, the UI gives me this error message: perl proxy-gen-ifalias eth0 /etc/modprobe.d/alias-eth0 /sbin/update-modules perl proxy-gen-ifalias eth1 /etc/modprobe.d/alias-eth1 /sbin/update-modules ifdown eth0 ifdown: interface eth0 not configured ifdown eth1 ifdown: interface eth1 not configured perl proxy-gen-netcfg /etc/network/interfaces ifup eth0 SICCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device eth0: ERROR while getting interface flags: No such device Failed to bring up eth0. ifconfig eth0 eth0: error fetching interface information: Device not found make: *** [/etc/network/interfaces] Error 1 ~ Here are the contents of the two perl files referred to in the message: paste.pocoo.org/show/2AMzAYhoCRZqlGY7wUFk/ proxy-gen-netcfg

  Read the article

• HA Proxy won't load balance my web requests. What have I done wrong?

  - by Josh Smeaton

  I've finally got HA Proxy set up and running in a way I think I want. However, it is not load balancing the web requests it receives. All requests are currently being forwarded to the first server in the cluster. I'm going to paste my configuration below - if anyone can see where I may have gone wrong, I'd appreciate it. This is my first stab at configuring web servers in a *nix environment. First up, I have HA Proxy running on the same host as the first server in the apache cluster. We are moving these servers to virtual later on, and they will have different virtual hosts, but I wanted to get this running now. Both web servers are receiving their health checks, and are reporting back correctly. The haproxy?stats page correctly reports servers that are up and down. I've tested this by altering the name of the file that is checked. I haven't put any load onto these servers yet. I've just opened up the URLs on several tabs (private browsing), and had several co-workers hit the URL too. All of the traffic goes to WEB1. Am I balancing incorrectly? global maxconn 10000 nbproc 8 pidfile /var/run/haproxy.pid log 127.0.0.1 local0 debug daemon defaults log global mode http retries 3 option redispatch maxconn 5000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen WEBHAEXT :80,:8443 mode http cookie sessionbalance insert indirect nocache balance roundrobin option httpclose option forwardfor except 127.0.0.1 option httpchk HEAD health_check.txt stats enable stats auth rah:rah server WEB1 10.90.2.131:81 cookie WEB_1 check server WEB2 10.90.2.130:80 cookie WEB_2 check

  Read the article

• How to keep Ubuntu 11.10 and Kate editor w/terminal from changing command line when changing tabs?

  - by Kairan

  I am programming C using Kate editor in Ubuntu 11.10. It works great, but when I change tabs in Kate, the terminal line changes to the file path of the tab I click on. Normally this is not a big deal (other than annoyingly adding extra text to my terminal) however if I am currently RUNNNING a C program, it obviously will type at the command line, which is not so cool. Example terminal window for my C program (its at a menu): 1) select opt 1 2) select opt 2 Enter choice: (here it waits for prompt from user) Now when I click a tab in Kate, it wants to put in the cd / path of the file in that tab, such as: cd /home/user/os/files And of course since my terminal was waiting for prompt from user it gets that command.. not good. Perhaps there is no fix, but maybe someone knows? Obviously I could choose NOT to switch tabs or end program before switching tabs... Note: I probably made the mistake of putting this under StackOverflow which is more of a programming area - so though repost here might be best (I am not sure how to link the questions but will paste hyperlink to that post - I dont want to violate any stackoverflow/superuser violations) Suggestions on merging them are welcome or if I should delete one? StackOverFlow Question

  Read the article

• Fliping the video stream in Sony Vegas Studio!

  - by NoCanDo

  How do I flip a video stream, making it effectively appear to run backwards. For example, I've got a 6 second video stream. I cut it at 2, 4, 6, so I've got now 3 seperate streams with 2 seconds each. 1-2 ; 3-4; 5-6 - That how it'll be displayed normal. Now what I want to do in Sony Vegas is to copy/paste and flip a selected stream. Let say: 1-2; 3-4; 3'-4' (copy/pasted); 5-6 - Now I've got a video stream with 8 seconds. Now I want to flip this copy pasted making it effectively run backwards. 1-2; 3-4; 4'-3'; 5-6. The idea is I want something like a movie, it goes, and goes and goes, then a text appears "WAIT! What just happend?", then the movie goes back to second 3 (1-2-3-4-'WAIT, WHAT JUST HAPPEND?'-4-3-4-5-6. I hope you get what I want to do in Sony Vegas.

  Read the article

• Dual booting Linux/Win7, Grub refuses to load Win7

  - by JohnB

  Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

  Read the article

• Quick, Linux-compatible unit-aware calculator

  - by endolith

  I want to be able to press a keyboard combination, start typing a mathematical expression that includes units and slightly advanced math (not just a four-function calculator), and get a result immediately, in units that I specify, that I can copy and paste. Currently I open Firefox and press Ctrl+K, type in the search box, and it usually gives me a result in the drop-down from Google Calculator. It doesn't always, though, so I press "=" at the end, wait for a result, remove the equals, wait for a result, realize it doesn't understand the way I typed a unit, open the result in a new tab, etc. it sucks. Wolfram Alpha is smarter, but very much slower, and the output is all images, not text, and I don't have a quick widget for it, if such a thing could even exist. GNU units has a ton of units, which is great, and I can define my own units, which is great, but they have to be written in specific, unintuitive ways, it doesn't handle much advanced math, and I'd need to open a terminal, start units, etc. I hate the command line. I wasted a lot of time trying to make front-ends for units in Deskbar and Launchy, but I'm not a real coder and I don't use either of those anymore. Any other solutions or enhancements of these?

  Read the article

• Flipping the video stream in Sony Vegas Studio!

  - by NoCanDo

  How do I flip a video stream, making it effectively appear to run backwards? For example, I've got a 6 second video stream. I cut it at 2, 4, 6, so I've got now 3 seperate streams with 2 seconds each. 1-2 ; 3-4; 5-6 - That's how it'll be displayed normally. Now what I want to do in Sony Vegas is to copy/paste and flip a selected stream. Let say: 1-2; 3-4; 3'-4'; 5-6 - The second 3-4 is copy/pasted; now I've got a video stream with 8 seconds. Now I want to flip this copy pasted making it effectively run backwards. 1-2; 3-4; 4'-3'; 5-6. The idea is I want something like a movie, it goes, and goes and goes, then a text appears "WAIT! What just happend?", then the movie goes back to second 3. 1-2-3-4-'WAIT! What just happened?'-4-3-4-5-6. I hope you get what I want to do in Sony Vegas.

  Read the article

• Can't get .htaccess to work

  - by orokusaki

  I'm using Apache2 on Ubuntu Lucid Lynx. I have config set to use .htaccess like normal. This is my default site: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> I've tried lower case "all" (AllowOverride all) as well. My .htaccess file looks like this: //Rewrite all requests to www Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^mydomain.com [nc] RewriteRule ^(.*)$ http://www.mydomain.com/$1 [r=301,nc] //301 Redirect "old_junk.html" File to "new_junk.html" Redirect 301 /old_junk.html /new_junk.html //301 Redirect Entire Directory "old_junk/" to "new_junk/" RedirectMatch 301 /old_junk/(.*) /new_junk//$1 // Copy and paste redirect examples from above: (with mydomain replaced with my actual domain... and my computer is plugged in)

  Read the article

• ghc6 install trouble: hGetContents: invalid argument (invalid UTF-8 byte sequence)

  - by olimay

  Having trouble installing ghc6 on Ubuntu Maverick via apt. Here's what seems to be the relevant error that comes up when I try to (apt-get|aptitude) install ghc6: A package failed to install. Trying to recover: Setting up ghc6 (6.12.1-13ubuntu1) ... ghc-pkg: /home/opm/.ghc/i386-linux-6.12.1/package.conf.d/unix-compat-0.2-edefa7bced91ebe610d455bab466e200.conf: hGetContents: invalid argument (invalid UTF-8 byte sequence) (Here's the full output, if you're interested: http://paste.ubuntu.com/566475/ ) This still happens after apt-get clean and apt-get update. My searching around has not really helped me understand what's going on, except that it might be caused by a mismatch in locale. So, here's the output of locale too: LANG=en_US.utf8 LANGUAGE=en_US:en LC_CTYPE="en_US.utf8" LC_NUMERIC="en_US.utf8" LC_TIME="en_US.utf8" LC_COLLATE="en_US.utf8" LC_MONETARY="en_US.utf8" LC_MESSAGES="en_US.utf8" LC_PAPER="en_US.utf8" LC_NAME="en_US.utf8" LC_ADDRESS="en_US.utf8" LC_TELEPHONE="en_US.utf8" LC_MEASUREMENT="en_US.utf8" LC_IDENTIFICATION="en_US.utf8" LC_ALL= Any ideas? Additional background: this all seems very strange to me, because I used to have ghc6 installed correctly--I use XMonad as my main window manager most of the time. I tried to install haskell-platform (through apt), which failed and told me that there was something wrong with ghc6, and so I reinstalled ghc6 and began to get the above error message.

  Read the article

• SSH client and Command Prompt replacements Windows look-and-feel

  - by Oddthinking

  The Problem I've worked exclusively in Windows. I can handle that. I've worked exclusively in DOS (a long time ago!). I can handle that. I've worked exclusively in Unix. I can handle that. Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY. I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux). My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY). My productivity drops dramatically when I cannot hit Undo, Home or End. The Solution I am Seeking An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them. Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface. I appreciate there may need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them. I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.) I know there are many SSH clients, but I am looking for advice for a particular need. PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite. Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?

  Read the article

• Config Apache HTTP Server for Eclipse

  - by hqt

  Maybe this question is silly but I really don't know how to solve. First, as other server, I want to define new server. So, in Eclipse, I go to: WindowsPreferenceServer: 1) When I add new server, in list, no category for apache HTTP server. Just has apache tomcat. So, I click into download additional server adapter--still don't have in list. 2) So, I search. I point to location I have installed. Good, Eclipse sees that is a HTTP Server. And Eclipse see folder to put project into for me (because I use LAMPP so that folder isn't in Apache folder). But here is my problem. When I want to run a new PHP Project. Right click, run on server. A new dialog appear take me to choose which server to run. And, in list of server, no HTTP Server, So, I don't know how to choose Apache HTTP Server !!! (because Eclipse doesn't see which server that I have defined, eclipse just find adapter first) So, if I want to run this project, I must copy all and paste to apache folder. Too handy !!! Please help me. Thanks :)

  Read the article

• "Path Not Found" when attempting to write to a sub folder within a mapped drive

  - by Adam

  We have an interesting issue with one of our server shares, or possibly, our Win 7 desktops. When our users try to save files in a sub folder, either via copy/paste or through an application, to a mapped drive on our DC they receive an error saying "Path not found". They can however browse this folder and open files from it. This is where the "Path Not Found" error doesn't seem to stack up in my opinion. Users can however save files fine in the root folder of the mapped drive, it appears only to affect sub folders. It seems to be random which users and machines this affects. The users can log on to a different machine and be able to save in sub folders fine, on the same mapped drive. Event viewer hasn't been much help either. Currently, the only solution we have found is to image the machines affected which solves the issue. Our servers are Server 2008 R2 with Win 7 Pro desktops. Any help/pointers/suggestions would greatly be appreciated.

  Read the article

• APC not caching many files

  - by tetranz

  Hello I have a Drupal site running on a VPS at Linode with PHP 5.2.10 and APC 3.1.6. It never caches more than about 25 files and barely uses any of its available memory. Drupal has hundreds of php files. I have another server where APC seems to work well and does indeed cache hundreds of files. The only difference with that site is that it runs Ubuntu 10.04 and php 5.3.2. The config settings are the same. What could be wrong? I'll paste the config from apc.php below. This is after hitting multiple parts of Drupal. Thanks APC Version 3.1.6 PHP Version 5.2.10-2ubuntu6.5 APC Host xxx.example.com Server Software Apache/2.2.12 (Ubuntu) Shared Memory 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking) Start Time 2010/12/02 11:32:17 Uptime 3 minutes File Upload Support 1 File Cache Information Cached Files 21 ( 1.4 MBytes) Hits 169 Misses 21 Request Rate (hits, misses) 1.00 cache requests/second Hit Rate 0.89 cache requests/second Miss Rate 0.11 cache requests/second Insert Rate 0.17 cache requests/second Cache full count 0 User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1

  Read the article

• Running two different websites domains one one IP address

  - by Akshar Prabhu Desai

  Here is my apache configuration file. I have two domain names running on same ip but i want them to point to different webapps. But in this case both point to the one intended for e-yantra.org. If I copy paste akshar.co.in part before E-yantra.org both start pointing to akshar.co.in I have two A DNS entries (one per domain name) pointing to the same IP. NameVirtualHost *:80 <VirtualHost *:80> ServerName www.e-yantra.org ServerAdmin [email protected] DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> <Directory /var/www/ci/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> <Directory /var/www/db2/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> <VirtualHost *:80> ServerName www.akshar.co.in ServerAdmin [email protected] DocumentRoot /var/akshar.co.in <Directory /var/akshar.co.in/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> </VirtualHost>

  Read the article

• Exchange 2007 relay from sendmail, message "Undelivered". Possible reasons?

  - by garlicman

  Note: This is my re-post from Stackoverflow. I've been messing with a test environment for security purposes where a DMZ RHEL5 sendmail server is used as a relay for an Exchange 2007 server. Exchange is working in the environment, I have Vista and XP VMs using Outlook on the Domain to send e-mail to each other. I've been trying to simulate an external internet VM sending an e-mail to the DMZ sendmail relay, which forwards to the Exchange server. Before everyone thinks this is too big a problem/question, I've followed the sendmail/Exchange guides and all I want to know is how I can determine why a relayed message/e-mail in Exchange is "Undelivered". Basically I send a SMTP message to the sendmail server, which relayed to my Exchange. The /var/log/maillog shows the e-mail being relayed to Exchange. Nov 17 13:41:22 externalmailserver sendmail[9017]: pAHIfMuW009017: from=<[email protected]>, size=1233, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=[10.50.50.1] Nov 17 13:42:17 externalmailserver sendmail[9050]: pAHIfMuW009017: to=<[email protected]>, delay=00:00:55, xdelay=00:00:36, mailer=relay, pri=121233, relay=mailserver.xyz.local. [192.168.1.20], dsn=2.0.0, stat=Sent (<[email protected]> Queued mail for delivery) This is good, but the To never receives the e-mail from Exchange. So I started poking around Exchange. In the "Message Tracking" Troubleshooting Assistant I queried the processed messages and found this: (I had to copy and paste the cells... sorry for the format) 2011/11/17 RECEIVE SMTP <[email protected]> "Undelivered Mail Returned to Sender" [email protected] [email protected] 192.168.100.10 MAILSERVER\DMZ Relay [email protected] I just want to know if anyone has any suggestions on why the DMZ Relay Connector I setup isn't relaying and is instead returning the forwarded e-mail to sender as Undelivered? My Exchange Relay Receive Connector is pretty simple. The Exchange server's FQDN is set as the HELO response, all available IP addresses can receive relayed e-mail, and the IP address of my sendmail server is specifically set as a remote server.

  Read the article

• Excel 2007: Named ranges problems when linking workbooks

  - by Mike

  I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

  Read the article

• I Made Wordpress Multisite. And Now Everything Doesn't Display Properly

  - by piratepartypumpkin

  I installed Ubuntu 10.4 then I installed Bitnami LAMP stack then I installed bitnami wordpress module then I tried to make the site into a multisite by following these instructions: http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite#How_to_add_several_WordPress_Multisite_blogs_with_different_domains.3f AND http://wiki.bitnami.org/Applications/BitNami_WordPress_Multisite I can elaborate if needed: I enabled multisite in my wp-config.php file. Then I created a network using the wordpress dashboard. I was given two blocks of text to copy and paste 1 block into my wp-config.php file and one into my .htaccess file. I did that and now I get this: When I go to my mywebsite.com I get this (this was there before I switched to multisite): If I go to mywebsite.com/wordpress I get this (this used to be a functioning wordpress theme): If I click on "My Blog" it redirects to 1mywebsite.com (where the "1" came from I have no idea) If I try to login by going to mywebsite.com/wordpress/wp-login I get this: and if I enter my user and password it redirects me to mywebsite.com/wp-login.php and gives me "Not Found" The requested URL /wp-login.php was not found on this server. NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /opt/lampstack-5.3.16-0/apps/wordpress ServerName mywebsite.com ServerAlias www.mywebsite.com </VirtualHost>

  Read the article

• Enable CPU fan always on

  - by Gundars Meness

  I am using 3 years old overheating laptop and I want my CPU fan to be spinning 24/7 regardless of the consequences. How to make it spin? The problem is that CPU & GPU heats up to 68°C (154 F) right after boot and never goes down, because CPU fan is not spinning full throttle. It starts spinning faster when temperature goes over 70°C and stops when it reaches seventy again. When doing heavy work on databases, it gets from 70 to 90 in no-time and automatically powers off. Bios does not contain any "fan spin 100%" options, just "spin slowly all the time" and "auto" which is more useless than the first one since my fan doesn't have pwm wire. Currently I'm solving this with cooling stand (3x5V), but it isn't much of a help. I would rather use the CPU fan since it is the only fan directly responsible for cooling down CPU/GPU. But how to make it spin 100% all the time? Should I attach it's red power wire to motherboard to get constant 5V (is there such option?), or is there an option to control it via software? Laptop: Samsung R528 2.3 GHz Intel i3 with Nvidia GeForce 310M Bios: Phoenix 03KT.M003.20100622.KSJ (and that is latest update) OS: Ubuntu 12.04.2 LTS with 3.2.0.51 kernel CPU fan: Image/Description Has 5V 0,4A and only 3 pins, no pwm. P.S. Yes, I did clean everything with alcohol, freed the air vents, changed thermal paste etc; that reduced temperature by 4 degrees.

  Read the article

• passing on command line options in bash

  - by bryan

  I have a question. I have a script, a kind of long script written in bash aprox. 370 lines. That has several functions and in those functions the user has to enter information which is then stored in files. ( This is suppose to represent a MySQL database, with the functions INSERT, UPDATE, SELECT, SELECT where x=y.) I created this myself in bash, now the only thing that rests me is that I need to be able to pass arguments on the command line to the script, that will do the same as the script does. I know that bash has positional parameters such as $1 $2 $3 $* $@ $0 ( refers to the name of the script) etc. I know how I can use these parameters in a simple if function. This is not enough for my script. I basicly need to do the same thing that the script does, but then from the command line. I have been struggling with this for a couple of days now and I cannot think of a way to get it to work. Maybe someone here can help me with this? If you want to have the script. That can be possible, but I don't think I can paste it in here... EDIT: Link to script, http://pastebin.com/Hd5VsDv2 Note, I am a beginner in bash scripting. EDIT: This is in reply to Answer 1. As I said I hope I can just replace the if [ "$1" = "one" ] ; then echo "found one" to if [ "$1" = "one" ] ; then echo SELECT where SELECT is the function I previously had in my script(above) http://pastebin.com/VFMkBL6g LINK to testing script

  Read the article

• Openfiler crashing without cause or leaving any log messages

  - by user44725

  So my linux machine keeps crashing, without so much as a bye or a leave. I've tried and tried and failed again to work out whats happening. Any help would be much appreciated. Linux chai 2.6.29.6-0.24.smp.gcc3.4.x86_64 #1 SMP Tue Mar 9 05:06:08 GMT 2010 x86_64 x86_64 x86_64 GNU/Linux Openfiler Here is what the /var/log/messages file says at the time of the latest crash. Nothing that unusual - just greg logging in and out via samba. You'll notice there is a cron running for root every minute - ignore this - this isn't the issue either it was some check I've been doing to discover its problem. Jun 2 10:32:01 chai crond(pam_unix)[16529]: session closed for user root Jun 2 10:32:49 chai samba(pam_unix)[15454]: session opened for user greg by (uid=0) Jun 2 10:33:01 chai crond(pam_unix)[16537]: session opened for user root by (uid=0) Jun 2 10:33:04 chai crond(pam_unix)[16537]: session closed for user root Jun 2 10:41:40 chai syslogd 1.4.1: restart. Jun 2 10:41:43 chai syslog: syslogd startup succeeded That restart was called manually by hand - by clicking the restart button on the box. So basically messages isn't revealing many secrets. dmesg only shows from startup. If there is any output I should paste. Just say when and where and it'll be done. Thanks for your help! Tim

  Read the article

• Copying a list in Microsoft word

  - by TaoistWA

  I have a list that looks like this ( notice the list is of the pattern A, B, C etc..) 1. [Insert question 1] A. [Insert response A] B. [Insert response B] C. [Insert response C] D. [Insert response D] 2. [Insert question 2] A. [Insert response A] B. [Insert response B] C. [Insert response C] D. [Insert response D] When I copy and paste it I want it to look exactly the same. However this does not happen. What I get instead is ( the A,B,C, pattern continues on with the rest of the alphabet) 1. [Insert question 1] A. [Insert response A] B. [Insert response B] C. [Insert response C] D. [Insert response D] 2. [Insert question 2] A. [Insert response A] B. [Insert response B] C. [Insert response C] D. [Insert response D] 3. [Insert question 1] E. [Insert response A] F. [Insert response B] G. [Insert response C] H. [Insert response D] 4. [Insert question 2] I. [Insert response A] J. [Insert response B] K. [Insert response C] How do I fix this? Thank you!

  Read the article

• Passing two arguments to a command using pipes

  - by firebat

  Usually, we only need to pass one argument: echo abc | cat echo abc | cat some_file - echo abc | cat - some_file Is there a way to pass two arguments? Something like {echo abc , echo xyz} | cat cat `echo abc` `echo xyz` I could just store both results in a file first echo abc > file1 echo xyz > file2 cat file1 file2 But then I might accidentally overwrite a file, which is not ok. This is going into a non-interactive script. Basically, I need a way to pass the results of two arbitrary commands to cat without writing to a file. UPDATE: Sorry, the example masks the problem. While { echo abc ; echo xyz ; } | cat does seem to work, the output is due to the echos, not the cat. A better example would be { cut -f2 -d, file1; cut -f1 -d, file2; } | paste -d, which does not work as expected. With file1: a,b c,d file2: 1,2 3,4 Expected output is: b,1 d,3 RESOLVED: Use process substitution: cat <(command1) <(command2) Alternatively, make named pipes using mkfifo: mkfifo temp1 mkfifo temp2 command1 > temp1 & command2 > temp2 & cat temp1 temp2 Less elegant and more verbose, but works fine, as long as you make sure temp1 and temp2 don't exist before hand.

  Read the article

• Command line solution for removing parts from a binary file?

  - by zsero

  I have a binary file and I would like to remove parts from. By removing I mean deleting those parts and thus making the file's size smaller. The parts would be between two ASCII strings. So, for example the file would look like this ........ start ABCD end ..... start EFGH end ..... start IJKL end ........... So in this file, I would like to search for strings "start" and "end" and remove the parts between them. The way I think I can do it is to lookup all the locations for "start" and "end" calculate ranges from that delete those parts Now I am using some GUI based Hex editor and I use the "Search All", "Select Range" and "Delete" commands, but I am sure it would be possible to solve it using some powerful command line hex/text editors. Do you know any solution for this problem which doesn't require using a GUI for looking up, copy & paste on clipboard, select range and delete commands but is just a few lines of command line? I am interested ini both Linux shell scripts or using some command line hex editors under Windows, or even Python scrips are welcome. Do you think it is possible to solve this problem just by a simple Regex replace? Are there any regex replace util which handles binary files well?

  Read the article

• Cannot get Windows snipping tool to auto run with AutoHotKey

  - by jasondavis

  I am trying to get Windows 7 sniping tool to run when I hit my PRINTSCREEN keyboard button with AUTOHOTKEY. I have been unsuccessful so far though. Here is what I have for the AutoHotKey script. I have tried this PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool And all those give me this error when I hit the PRINTSCREEN button... It basicly says it cannot find the file, however the file path seems to be correct, I can copy paste it into a window and it opens the snipping tool, any ideas why it will not work? Here is the full code to my AHK file... ; ; AutoHotkey Version: 1.x ; Language: English ; Platform: Win7 ; Author: Jason Davis <friendproject@> ; ; Script Function: ; Template script (you can customize this template by editing "ShellNew\Template.ahk" in your Windows folder) ; #NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases. SendMode Input ; Recommended for new scripts due to its superior speed and reliability. SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory. /* PRINTSCREEN = Will run Windows 7 snipping tool */ PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe return

  Read the article

• Add and remove letterhead in Word document

  - by Daniel Wolf

  Our company has letterheaded paper (pre-printed paper with our logo on it). Whenever we send something out by mail, we print it on that paper. However, when we send the same document via email, we convert it to a PDF file. Now the problem is: when converting a Word document to PDF, it should contain the letterhead. When printing the same document on paper, it should not (or else the letterhead would be printed twice). Currently, we are using two different Word document templates - one with letterhead, one without. So whenever we want to add or remove the letterhead, we have to create a new document with the other template and copy and paste everything over. Nasty solution. What I'm looking for is some simple way to switch the letterhead on and off. What I've tried so far: Switching the template: There does not seem to be a simple way to switch the template for an existing document. Using a picture watermark: Our letterhead goes all the way to the border of the page. (No printer supports this, of course, but it is fine for export to PDF.) Apparently depending on the current default printer, Word will not allow a borderless watermark, instead shifting the image around. Using the page header: When editing the page header, I can insert pictures at arbitrary positions, which is great. However, I could not find a way (short of macros) to enable/disable just the pictures in the header. (The text should remain there.)

  Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >