Search Results

Search found 4503 results on 181 pages for 'logical operator'.

Page 79/181 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Quantifying the effects of partition mis-alignment

  - by Matt

  I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

  Read the article

• Booting Fedora guest VBox on /dev/mapper/vg0-fc17-root

  - by NevilleDNZ

  I already have the following logical volumes: host:/dev/mapper/vg0-fc17-boot (guestOS:/dev/hdb) formatted as ext4 (no partition table) host:/dev/mapper/vg0-fc17-root (guestOS:/dev/hdc) formatted as ext4 (no partition table) Do I have to create the following grub partition to boot a guest VM under VirtualBox? host:/dev/mapper/vg-fc17-mbr (guestOS:/dev/hda) with a partition table and install grub MBR here? Or is there a better way? (Maybe grub on vg0-fc17-boot?)

  Read the article

• where on disk is space allocated for new files inside LVM lv with ext4 file system?

  - by Jost

  I run a multi-disk server with LVM2. Several large disks serve as LVM2 physical volumes for one volume group, containing one logical volume formatted with ext4. Nothing fancy, just your standard linear setup. Recently an additional, very small disk was added as physical volume to that volume group and I expanded both the logical volume, and the ext4 file system therein onto that disk. This lv is used to store incremental backups using rsync and is only about 30% full, there have rarely been any files deleted from it, only incremental writes. Now this new HDD I added to the pre-existing volume group has unexpectedly died on me, and the volume group won't come up because it is missing one physical volume. As fate will have it, this WAS the "in an event of catastrophic failure on the primary server"-backup, the event happened, the boss is not happy, so this kinda has to work... According to this (Part 3): http://www.novell.com/coolsolutions/appnote/19386.html it is possible to trick LVM into starting anyway by creating a new pv with identical metadata to the failed disk, which will make the volume accessible, but of course leave giant holes in the file system. I have'n tried it yet, because it involves repairing (writing to) the file system which eliminates the possibility of trying other things if it fails. Now my question is: How does this setup actually allocate disk space for new data? Is it allocated linearly from beginning to end of PVs, in the order they were added to the vg? Is it striped somehow in order to increase performance/balance load? since this defective disk was added only later to an existing lvm2 vg and lv, containing a half-empty ext4, what are the chances that there was never any data written to the defective disk? In other words: what are the chances of recovering all my data, even without the defective disk, by just starting the volume group as-is? Am I about to go spend $1500 on having 250GB of empty space recovered when I send the defective disk in for repair? Is there a way to check without mounting the file system and opening the files, hoping they contain something other than zeros? (comparing addresses of used data blocks inside ext4 to address ranges that were on the missing pv, something like that, preferably easy to automate) I know bitwise-copying the entire lv into an image file before trying to repair the ext4 would probably be a good idea, but since this lv is very large and I just suffered major file system failure on several systems it is probably a luxury I don't have... Any suggestions?

  Read the article

• Clonezilla disk to disk clone on a dual boot ubuntu karmic & XP setup - cannot open '/boot/grub/devi

  - by srboisvert

  I just tried to clone a failing existing boot drive for a dual boot system with Ubuntu karmic and Windows XP installed using Clonezilla. The cloning worked fine right up until the end when I got the following error: Running: grub-install --no floppy --root-directory=/tmp/hd_img.twABYW /dev/sdb grub-probe: error: Cannot open '/boot/grub/device.map' /usr/sbin/grub-install:line 374: [: =: unary operator expected What's my next step? I imagine I need to somehow rebuild my boot record for Windows and Ubuntu and edit grub.

  Read the article

• Multiple nt52 entries in bootmgr

  - by SLaks

  I have a machine with Windows XP, Server 2003 R2, and Server 2008 R2. Right now, bootmgr has one entry for Server 2008 R2 and one entry for ntldr, which then leads to the ntldr boot.ini menu. Is it possible to add two different nt52 entries on two partitions so that I can access all three OSes from the bootmgr menu? Right now, Server 2008 and XP are in logical drives on an extended partition, but (I assume) I can image them onto basic partitions if necessary.

  Read the article

• Backup Xen domU machines while running.

  - by Jonathan Hawkes

  The host machine is running CentOS 5.3 and using LVM to create Logical Volumes (LVs) and to allow live snapshots to be taken of those LVs. My thought was to store all of the image files for the Xen underpriviledged domains (domU) in a single LV and periodically take a snapshot of that LV and copy the disk images out of the snapshot in order to make a live backup of these systems. Is this doable? Is there a better way? Thanks!

  Read the article

• Partition table is corrupt

  - by Tim

  I have a corrupt the partition table on the laptop that is running Ubunutu 10.4. Before the partition table was corrupt I had the following partitions: 2 primary partitions: 1st - NTFS 2nd - Extended 4 logical partitons that are built within 2nd extended: 1st NTFS (68 Gib) 2nd Linux (19 Gib) 3rd Swap (1.4 Gib) 4th Linux (24 Gib) The physical order of these partitions was the following: ( 4th Linux ) - ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) The logical order of the partition was different: ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) ( 4th Linux ) NTFS partition was big and it resided between 2 Linux partitions, neither of these partitions had enough space to install Oracle 11g for my project with prof. Gamper and Markus Innerebner. Therefore, I decided to a) either move the NTFS partion to the left or b) remove it completely and extend partition where Linux resides. As I tool I have chosen GParted. But unfortunately it was not able to move the partition because he found that in NTFS partition there are some blocks that are referenced multiple times. Also it was not able to remove the partition neither, because in this case the partitions that follow it ( 2nd Linux ) - ( 3rd Swap ) have to be in his opinion also removed, because the organization of extended partition is a linked list. Since GParted was not able to do such thing I was trying to find another tool. I found diskdrake tool on PSLinuxOS distribution of linux. That tool silently deleted ( 1st NTFS ) partition and I thought that everything was fine. But diskdrake has damaged the partition in a way that I am not able either to boot from the hard disk nor to see the partitions with GParted and even with diskdrake itself! Fortunately I have a live CD of Ubuntu 8.10 and I am able to boot and see hard disk. I have 2 ideas how I can solve the problem: 1) Manually change disk partitions and point them to the correct partitions. 2) Create partition table with GParted that as much as possible is the same with the previous one I find the 2nd approach less time consuming but some data will be lost because of it is not possible to place borders of the partitions exactly how it was before. And moreover I am not sure if such approach would work, for example, if the OS is able to locate files after repartitioning. I feel like that it will but not 100% sure. Are there some ideas how the problem may be solved?

  Read the article

• Compilation problems with vector<auto_ptr<> >

  - by petersohn

  Consider the following code: #include <iostream> #include <memory> #include <vector> using namespace std; struct A { int a; A(int a_):a(a_) {} }; int main() { vector<auto_ptr<A> > as; for (int i = 0; i < 10; i++) { auto_ptr<A> a(new A(i)); as.push_back(a); } for (vector<auto_ptr<A> >::iterator it = as.begin(); it != as.end(); ++it) cout << (*it)->a << endl; } When trying to compile it, I get the following obscure compiler error from g++: g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"src/proba.d" -MT"src/proba.d" -o"src/proba.o" "../src/proba.cpp" /usr/include/c++/4.1.2/ext/new_allocator.h: In member function ‘void __gnu_cxx::new_allocator<_Tp>::construct(_Tp*, const _Tp&) [with _Tp = std::auto_ptr<A>]’: /usr/include/c++/4.1.2/bits/stl_vector.h:606: instantiated from ‘void std::vector<_Tp, _Alloc>::push_back(const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ ../src/proba.cpp:19: instantiated from here /usr/include/c++/4.1.2/ext/new_allocator.h:104: error: passing ‘const std::auto_ptr<A>’ as ‘this’ argument of ‘std::auto_ptr<_Tp>::operator std::auto_ptr_ref<_Tp1>() [with _Tp1 = A, _Tp = A]’ discards qualifiers /usr/include/c++/4.1.2/bits/vector.tcc: In member function ‘void std::vector<_Tp, _Alloc>::_M_insert_aux(__gnu_cxx::__normal_iterator<typename std::_Vector_base<_Tp, _Alloc>::_Tp_alloc_type::pointer, std::vector<_Tp, _Alloc> >, const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’: /usr/include/c++/4.1.2/bits/stl_vector.h:610: instantiated from ‘void std::vector<_Tp, _Alloc>::push_back(const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ ../src/proba.cpp:19: instantiated from here /usr/include/c++/4.1.2/bits/vector.tcc:256: error: passing ‘const std::auto_ptr<A>’ as ‘this’ argument of ‘std::auto_ptr<_Tp>::operator std::auto_ptr_ref<_Tp1>() [with _Tp1 = A, _Tp = A]’ discards qualifiers /usr/include/c++/4.1.2/bits/stl_construct.h: In function ‘void std::_Construct(_T1*, const _T2&) [with _T1 = std::auto_ptr<A>, _T2 = std::auto_ptr<A>]’: /usr/include/c++/4.1.2/bits/stl_uninitialized.h:86: instantiated from ‘_ForwardIterator std::__uninitialized_copy_aux(_InputIterator, _InputIterator, _ForwardIterator, __false_type) [with _InputIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _ForwardIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >]’ /usr/include/c++/4.1.2/bits/stl_uninitialized.h:113: instantiated from ‘_ForwardIterator std::uninitialized_copy(_InputIterator, _InputIterator, _ForwardIterator) [with _InputIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _ForwardIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >]’ /usr/include/c++/4.1.2/bits/stl_uninitialized.h:254: instantiated from ‘_ForwardIterator std::__uninitialized_copy_a(_InputIterator, _InputIterator, _ForwardIterator, std::allocator<_Tp>) [with _InputIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _ForwardIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _Tp = std::auto_ptr<A>]’ /usr/include/c++/4.1.2/bits/vector.tcc:279: instantiated from ‘void std::vector<_Tp, _Alloc>::_M_insert_aux(__gnu_cxx::__normal_iterator<typename std::_Vector_base<_Tp, _Alloc>::_Tp_alloc_type::pointer, std::vector<_Tp, _Alloc> >, const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ /usr/include/c++/4.1.2/bits/stl_vector.h:610: instantiated from ‘void std::vector<_Tp, _Alloc>::push_back(const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ ../src/proba.cpp:19: instantiated from here /usr/include/c++/4.1.2/bits/stl_construct.h:81: error: passing ‘const std::auto_ptr<A>’ as ‘this’ argument of ‘std::auto_ptr<_Tp>::operator std::auto_ptr_ref<_Tp1>() [with _Tp1 = A, _Tp = A]’ discards qualifiers make: *** [src/proba.o] Error 1 It seems to me that there is some kind of problem with consts here. Does this mean that auto_ptr can't be used in vectors?

  Read the article

• Using WeakReference to resolve issue with .NET unregistered event handlers causing memory leaks.

  - by Eric

  The problem: Registered event handlers create a reference from the event to the event handler's instance. If that instance fails to unregister the event handler (via Dispose, presumably), then the instance memory will not be freed by the garbage collector. Example: class Foo { public event Action AnEvent; public void DoEvent() { if (AnEvent != null) AnEvent(); } } class Bar { public Bar(Foo l) { l.AnEvent += l_AnEvent; } void l_AnEvent() { } } If I instantiate a Foo, and pass this to a new Bar constructor, then let go of the Bar object, it will not be freed by the garbage collector because of the AnEvent registration. I consider this a memory leak, and seems just like my old C++ days. I can, of course, make Bar IDisposable, unregister the event in the Dispose() method, and make sure to call Dispose() on instances of it, but why should I have to do this? I first question why events are implemented with strong references? Why not use weak references? An event is used to abstractly notify an object of changes in another object. It seems to me that if the event handler's instance is no longer in use (i.e., there are no non-event references to the object), then any events that it is registered with should automatically be unregistered. What am I missing? I have looked at WeakEventManager. Wow, what a pain. Not only is it very difficult to use, but its documentation is inadequate (see http://msdn.microsoft.com/en-us/library/system.windows.weakeventmanager.aspx -- noticing the "Notes to Inheritors" section that has 6 vaguely described bullets). I have seen other discussions in various places, but nothing I felt I could use. I propose a simpler solution based on WeakReference, as described here. My question is: Does this not meet the requirements with significantly less complexity? To use the solution, the above code is modified as follows: class Foo { public WeakReferenceEvent AnEvent = new WeakReferenceEvent(); internal void DoEvent() { AnEvent.Invoke(); } } class Bar { public Bar(Foo l) { l.AnEvent += l_AnEvent; } void l_AnEvent() { } } Notice two things: 1. The Foo class is modified in two ways: The event is replaced with an instance of WeakReferenceEvent, shown below; and the invocation of the event is changed. 2. The Bar class is UNCHANGED. No need to subclass WeakEventManager, implement IWeakEventListener, etc. OK, so on to the implementation of WeakReferenceEvent. This is shown here. Note that it uses the generic WeakReference that I borrowed from here: http://damieng.com/blog/2006/08/01/implementingweakreferencet I had to add Equals() and GetHashCode() to his class, which I include below for reference. class WeakReferenceEvent { public static WeakReferenceEvent operator +(WeakReferenceEvent wre, Action handler) { wre._delegates.Add(new WeakReference<Action>(handler)); return wre; } public static WeakReferenceEvent operator -(WeakReferenceEvent wre, Action handler) { foreach (var del in wre._delegates) if (del.Target == handler) { wre._delegates.Remove(del); return wre; } return wre; } HashSet<WeakReference<Action>> _delegates = new HashSet<WeakReference<Action>>(); internal void Invoke() { HashSet<WeakReference<Action>> toRemove = null; foreach (var del in _delegates) { if (del.IsAlive) del.Target(); else { if (toRemove == null) toRemove = new HashSet<WeakReference<Action>>(); toRemove.Add(del); } } if (toRemove != null) foreach (var del in toRemove) _delegates.Remove(del); } } public class WeakReference<T> : IDisposable { private GCHandle handle; private bool trackResurrection; public WeakReference(T target) : this(target, false) { } public WeakReference(T target, bool trackResurrection) { this.trackResurrection = trackResurrection; this.Target = target; } ~WeakReference() { Dispose(); } public void Dispose() { handle.Free(); GC.SuppressFinalize(this); } public virtual bool IsAlive { get { return (handle.Target != null); } } public virtual bool TrackResurrection { get { return this.trackResurrection; } } public virtual T Target { get { object o = handle.Target; if ((o == null) || (!(o is T))) return default(T); else return (T)o; } set { handle = GCHandle.Alloc(value, this.trackResurrection ? GCHandleType.WeakTrackResurrection : GCHandleType.Weak); } } public override bool Equals(object obj) { var other = obj as WeakReference<T>; return other != null && Target.Equals(other.Target); } public override int GetHashCode() { return Target.GetHashCode(); } } It's functionality is trivial. I override operator + and - to get the += and -= syntactic sugar matching events. These create WeakReferences to the Action delegate. This allows the garbage collector to free the event target object (Bar in this example) when nobody else is holding on to it. In the Invoke() method, simply run through the weak references and call their Target Action. If any dead (i.e., garbage collected) references are found, remove them from the list. Of course, this only works with delegates of type Action. I tried making this generic, but ran into the missing where T : delegate in C#! As an alternative, simply modify class WeakReferenceEvent to be a WeakReferenceEvent, and replace the Action with Action. Fix the compiler errors and you have a class that can be used like so: class Foo { public WeakReferenceEvent<int> AnEvent = new WeakReferenceEvent<int>(); internal void DoEvent() { AnEvent.Invoke(5); } } Hopefully this will help someone else when they run into the mystery .NET event memory leak!

  Read the article

• Compilng problems with vector<auto_ptr<> >

  - by petersohn

  Consider the following code: #include <iostream> #include <memory> #include <vector> using namespace std; struct A { int a; A(int a_):a(a_) {} }; int main() { vector<auto_ptr<A> > as; for (int i = 0; i < 10; i++) { auto_ptr<A> a(new A(i)); as.push_back(a); } for (vector<auto_ptr<A> >::iterator it = as.begin(); it != as.end(); ++it) cout << (*it)->a << endl; } When trying to compile it, I get the following obscure compiler error from g++: g++ -O0 -g3 -Wall -c -fmessage-length=0 -MMD -MP -MF"src/proba.d" -MT"src/proba.d" -o"src/proba.o" "../src/proba.cpp" /usr/include/c++/4.1.2/ext/new_allocator.h: In member function ‘void __gnu_cxx::new_allocator<_Tp>::construct(_Tp*, const _Tp&) [with _Tp = std::auto_ptr<A>]’: /usr/include/c++/4.1.2/bits/stl_vector.h:606: instantiated from ‘void std::vector<_Tp, _Alloc>::push_back(const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ ../src/proba.cpp:19: instantiated from here /usr/include/c++/4.1.2/ext/new_allocator.h:104: error: passing ‘const std::auto_ptr<A>’ as ‘this’ argument of ‘std::auto_ptr<_Tp>::operator std::auto_ptr_ref<_Tp1>() [with _Tp1 = A, _Tp = A]’ discards qualifiers /usr/include/c++/4.1.2/bits/vector.tcc: In member function ‘void std::vector<_Tp, _Alloc>::_M_insert_aux(__gnu_cxx::__normal_iterator<typename std::_Vector_base<_Tp, _Alloc>::_Tp_alloc_type::pointer, std::vector<_Tp, _Alloc> >, const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’: /usr/include/c++/4.1.2/bits/stl_vector.h:610: instantiated from ‘void std::vector<_Tp, _Alloc>::push_back(const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ ../src/proba.cpp:19: instantiated from here /usr/include/c++/4.1.2/bits/vector.tcc:256: error: passing ‘const std::auto_ptr<A>’ as ‘this’ argument of ‘std::auto_ptr<_Tp>::operator std::auto_ptr_ref<_Tp1>() [with _Tp1 = A, _Tp = A]’ discards qualifiers /usr/include/c++/4.1.2/bits/stl_construct.h: In function ‘void std::_Construct(_T1*, const _T2&) [with _T1 = std::auto_ptr<A>, _T2 = std::auto_ptr<A>]’: /usr/include/c++/4.1.2/bits/stl_uninitialized.h:86: instantiated from ‘_ForwardIterator std::__uninitialized_copy_aux(_InputIterator, _InputIterator, _ForwardIterator, __false_type) [with _InputIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _ForwardIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >]’ /usr/include/c++/4.1.2/bits/stl_uninitialized.h:113: instantiated from ‘_ForwardIterator std::uninitialized_copy(_InputIterator, _InputIterator, _ForwardIterator) [with _InputIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _ForwardIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >]’ /usr/include/c++/4.1.2/bits/stl_uninitialized.h:254: instantiated from ‘_ForwardIterator std::__uninitialized_copy_a(_InputIterator, _InputIterator, _ForwardIterator, std::allocator<_Tp>) [with _InputIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _ForwardIterator = __gnu_cxx::__normal_iterator<std::auto_ptr<A>*, std::vector<std::auto_ptr<A>, std::allocator<std::auto_ptr<A> > > >, _Tp = std::auto_ptr<A>]’ /usr/include/c++/4.1.2/bits/vector.tcc:279: instantiated from ‘void std::vector<_Tp, _Alloc>::_M_insert_aux(__gnu_cxx::__normal_iterator<typename std::_Vector_base<_Tp, _Alloc>::_Tp_alloc_type::pointer, std::vector<_Tp, _Alloc> >, const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ /usr/include/c++/4.1.2/bits/stl_vector.h:610: instantiated from ‘void std::vector<_Tp, _Alloc>::push_back(const _Tp&) [with _Tp = std::auto_ptr<A>, _Alloc = std::allocator<std::auto_ptr<A> >]’ ../src/proba.cpp:19: instantiated from here /usr/include/c++/4.1.2/bits/stl_construct.h:81: error: passing ‘const std::auto_ptr<A>’ as ‘this’ argument of ‘std::auto_ptr<_Tp>::operator std::auto_ptr_ref<_Tp1>() [with _Tp1 = A, _Tp = A]’ discards qualifiers make: *** [src/proba.o] Error 1 It seems to me that there is some kind of problem with consts here. Does this mean that auto_ptr can't be used in vectors?

  Read the article

• Multiple nt52 entries in bootmgr

  - by SLaks

  I have a machine with Windows XP, Server 2003 R2, and Server 2008 R2. Right now, bootmgr has one entry for Server 2008 R2 and one entry for ntldr, which then leads to the ntldr boot.ini menu. Is it possible to add two different nt52 entries on two partitions so that I can access all three OSes from the bootmgr menu? Right now, Server 2008 and XP are in logical drives on an extended partition, but (I assume) I can image them onto basic partitions if necessary.

  Read the article

• Freeradius on Linux with dynamic VLAN assignment via AD

  - by choki

  I've been trying to configure my freeradius server on Linux to authenticate users from an existing Active Directory (windows server 2003) and i've already done that. Now i need to assign VLANs to those users and i dont know how to :(. The logical procedure should be with an AD attribute but i haven't found which one nor how to read it from the AD to use it on the freeradius server... Can anyone help me with this or tell me where can i find a solution? Thanks in advance

  Read the article

• How to unlock and remove a protected partition from Prestigio USB stick?

  - by mr.b

  Ok, so, I have one of those fancy schmancy devices, which is given to me by a frustrated friend of mine. Device is a Prestigio Leather 8GB, which identifies itself to Linux host as: Bus 001 Device 006: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Kernel messages as USB device is plugged in: kernel: [ 2769.580042] usb 1-9: new high speed USB device using ehci_hcd and address 7 kernel: [ 2769.714782] scsi8 : usb-storage 1-9:1.0 kernel: [ 2770.713937] scsi 8:0:0:0: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.714535] scsi 8:0:0:1: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.715734] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 2770.716108] sd 8:0:0:1: Attached scsi generic sg4 type 0 kernel: [ 2770.722175] sd 8:0:0:0: [sdc] 962560 512-byte logical blocks: (492 MB/470 MiB) kernel: [ 2770.722657] sd 8:0:0:0: [sdc] Write Protect is on kernel: [ 2770.731078] sd 8:0:0:1: [sdd] 14012416 512-byte logical blocks: (7.17 GB/6.68 GiB) kernel: [ 2770.731215] sdc: kernel: [ 2770.738251] sd 8:0:0:1: [sdd] Write Protect is off kernel: [ 2770.880328] kernel: [ 2770.885876] sd 8:0:0:0: [sdc] Attached SCSI removable disk kernel: [ 2770.887442] sdd: unknown partition table kernel: [ 2771.049605] sd 8:0:0:1: [sdd] Attached SCSI removable disk So, symptoms are typical for U3-like devices: two separate devices inside of a single flash device. Windows sees it also as two identical usb devices, and mounts two separate drives to system, whereas first one presents itself as a CDROM device, holding a write-protected content, and second is a regular flash-disk partition, that "can" be written to. However, it seems like it's broken in some weird way, since it won't let me write anything to it, format it, nothing, but that's not the issue right now. Question: How can I unlock entire USB stick so it appears to system as a single, 8GB device which can be partitioned and used normally, without restrictions? Since it appeared to be an U3 device, I have tried standard utilities: both U3 Uninstaller by u3.com (found on SoftPedia), and opensource u3_tool from sourceforge (on both Windows and Linux). First utility failed to even detect USB stick as U3 device (simply stood idle while I re-plugged stick several times), while second tool failed with some obscure error about SCSI command unable to do something (I might be able to provide exact errors when I switch back to windows). u3_tool -i /dev/sg3 (Display device info) fails with u3_partition_info() failed: Device reported command failed: status 1 ...and every other option fails with same error, minus first part which states which command precisely has failed. So, apparently, this isn't a U3 device. Or, if it is, it doesn't behave like one. I read on a few occasions that this device protection is done by special command sent to device which tells it to lock itself, and so there should be an unlock command, that would set drive straight. Does anyone have any idea about what could I do to this device to fix it? P.S. I also mentioned a problem with being unable to use second "drive", but I'll tackle that problem when (and if) I manage to merge those two devices into one...

  Read the article

• Centos 5.5 [Read-only file system] issue after rebooting

  - by canu johann

  I have a virtual server under centos 5.5 (hosted by a japanese company called sakura ) Since yesterday, connection through ssh couldn't be established. I've contacted support center who told me to restart VS from the control panel. After restarting, I got the message below Connected to domain wwwxxxxxx.sakura.ne.jp Escape character is ^] [ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda3 / contains a file system with errors, check forced. /: Inodes that were part of a corrupted orphan linked list found. /: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) @@cat: /proc/self/attr/current: Invalid argument Welcome to CentOS Starting udev: @[ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: No volume groups found [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a /dev/vda3 / contains a file system with errors, check forced. /: Inodes that were part of a corrupted orphan linked list found. /: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. (i.e., without -a or -p options) [FAILED] *** An error occurred during the file system check. *** Dropping you to a shell; the system will reboot *** when you leave the shell. *** Warning -- SELinux is active *** Disabling security enforcement for system recovery. *** Run 'setenforce 1' to reenable. /etc/rc.d/rc.sysinit: line 53: /selinux/enforce: Read-only file system Give root password for maintenance (or type Control-D to continue): bash: cannot set terminal process group (-1): Inappropriate ioctl for device bash: no job control in this shell bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system bash: cannot create temp file for here-document: Read-only file system (Repair filesystem) 1 # setenforce 1 setenforce: SELinux is disabled (Repair filesystem) 2 # echo 1 (Repair filesystem) 4 # /etc/init.d/sshd status openssh-daemon is stopped (Repair filesystem) 5 # /etc/init.d/sshd start Starting sshd: NET: Registered protocol family 10 lo: Disabled Privacy Extensions touch: cannot touch `/var/lock/subsys/sshd': Read-only file system (Repair filesystem) 6 # sudo /etc/init.d/sshd start sudo: sorry, you must have a tty to run sudo (Repair filesystem) 7 # I have 4 site in production and I need to restart the server quickly (SSH + HTTPD ,...). Thank you for your time.

  Read the article

• Volume group disappeared, LVs still available

  - by Ben

  I've run into an issue with my KVM host which runs VMs on a LVM volume. As of last night the logical volumes are no longer seen as such (I can't create snapshots of them even though I have been for months now). Running any scans all result in nothing being found: [root@apollo ~]# pvscan No matching physical volumes found [root@apollo ~]# vgscan Reading all physical volumes. This may take a while... No volume groups found root@apollo ~]# lvscan No volume groups found If I try restoring the VG conf backup from /etc/lvm/backups/vg0 I get the following error: [root@apollo ~]# vgcfgrestore -f /etc/lvm/backup/vg0 vg0 Couldn't find device with uuid 20zG25-H8MU-UQPf-u0hD-NftW-ngsC-mG63dt. Cannot restore Volume Group vg0 with 1 PVs marked as missing. Restore failed. /etc/lvm/backups/vg0 has the following for the physical volume: physical_volumes { pv0 { id = "20zG25-H8MU-UQPf-u0hD-NftW-ngsC-mG63dt" device = "/dev/sda5" # Hint only status = ["ALLOCATABLE"] flags = [] dev_size = 4292870143 # 1.99902 Terabytes pe_start = 384 pe_count = 524031 # 1.99902 Terabytes } } fdisk -l /dev/sda shows the following: [root@apollo ~]# fdisk -l /dev/sda Disk /dev/sda: 6000.1 GB, 6000069312512 bytes 64 heads, 32 sectors/track, 5722112 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000188b7 Device Boot Start End Blocks Id System /dev/sda1 2 32768 33553408 82 Linux swap / Solaris /dev/sda2 32769 33280 524288 83 Linux /dev/sda3 33281 1081856 1073741824 83 Linux /dev/sda4 1081857 3177984 2146435072 85 Linux extended /dev/sda5 1081857 3177984 2146435071+ 8e Linux LVM The server is running a 4 disk HW RAID10 which seems perfectly healthy according to megacli and smartd. The only odd message in /var/log/messages is the following which shows up every couple of hours: Jun 10 09:41:57 apollo udevd[527]: failed to create queue file: No space left on device Output of df -h [root@apollo ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1016G 119G 847G 13% / /dev/sda2 508M 67M 416M 14% /boot Does anyone have any ideas what to do next? The VMs are all running fine at the moment apart from not being able to snapshot them. Updated with extra info It's not a lack of inodes: [root@apollo ~]# df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 67108864 48066 67060798 1% / /dev/sda2 32768 47 32721 1% /boot pvs, vgs & lvs either output nothing or "No volume groups found".

  Read the article

• Apache subdomain problem

  - by Rudiger

  Sorry if this is answered somewhere else but can't figure it out. Cant get my server to respond on the subdomain, only the main domain. Relevant info below, if you need more let me know. Listen 10.0.1.191:80 ServerName server.local:80 (i know a bit stupid but logical for me and it works) ServerName www.server.local ServerAlias server.local DocumentRoot /var/www/html/ ServerName qtp.server.local DocumentRoot /var/www/qtp/ Cheers

  Read the article

• networking related problem

  - by abhay

  i have installed two LAN cards in my PC. one is used for local networking and other is for Wide area networking( both have a different gateways). But when i need to browse in WAN for that i have to disable my LAN and vice versa. so i don't know the technical / logical reason behind that. so could you please give me reason why this happens.

  Read the article

• What super-calculator do you use?

  - by Jeremy Rudd

  Windows Calculator can switch into a "Scientific" mode, getting more math and logical operators, but that's not good enough. I know there are tons of features its missing, such as the ones we see in the Windows 7 calc, or simply making things more visual. Its been years and I still haven't found a good calculator replacement. Suggestions? And hopefully your calc replaces MS Calc when I press the dedicated "calculator key" on my Keyboard, so I don't have to hunt around for a shortcut.

  Read the article

• Is there anything like Carbon Copy Cloner (CCC) for Linux?

  - by GiH

  I'm running Ubuntu and I'd like to create an image of my OS. Is this possible? I used CCC on my mac, it was great it even copies everything in a logical order so it technically defrags for you.

  Read the article

• Making swap faster, easier to use and exception-safe

  - by FredOverflow

  I could not sleep last night and started thinking about std::swap. Here is the familiar C++98 version: template <typename T> void swap(T& a, T& b) { T c(a); a = b; b = c; } If a user-defined class Foo uses external ressources, this is inefficient. The common idiom is to provide a method void Foo::swap(Foo& other) and a specialization of std::swap<Foo>. Note that this does not work with class templates since you cannot partially specialize a function template, and overloading names in the std namespace is illegal. The solution is to write a template function in one's own namespace and rely on argument dependent lookup to find it. This depends critically on the client to follow the "using std::swap idiom" instead of calling std::swap directly. Very brittle. In C++0x, if Foo has a user-defined move constructor and a move assignment operator, providing a custom swap method and a std::swap<Foo> specialization has little to no performance benefit, because the C++0x version of std::swap uses efficient moves instead of copies: #include <utility> template <typename T> void swap(T& a, T& b) { T c(std::move(a)); a = std::move(b); b = std::move(c); } Not having to fiddle with swap anymore already takes a lot of burden away from the programmer. Current compilers do not generate move constructors and move assignment operators automatically yet, but as far as I know, this will change. The only problem left then is exception-safety, because in general, move operations are allowed to throw, and this opens up a whole can of worms. The question "What exactly is the state of a moved-from object?" complicates things further. Then I was thinking, what exactly are the semantics of std::swap in C++0x if everything goes fine? What is the state of the objects before and after the swap? Typically, swapping via move operations does not touch external resources, only the "flat" object representations themselves. So why not simply write a swap template that does exactly that: swap the object representations? #include <cstring> template <typename T> void swap(T& a, T& b) { unsigned char c[sizeof(T)]; memcpy( c, &a, sizeof(T)); memcpy(&a, &b, sizeof(T)); memcpy(&b, c, sizeof(T)); } This is as efficient as it gets: it simply blasts through raw memory. It does not require any intervention from the user: no special swap methods or move operations have to be defined. This means that it even works in C++98 (which does not have rvalue references, mind you). But even more importantly, we can now forget about the exception-safety issues, because memcpy never throws. I can see two potential problems with this approach: First, not all objects are meant to be swapped. If a class designer hides the copy constructor or the copy assignment operator, trying to swap objects of the class should fail at compile-time. We can simply introduce some dead code that checks whether copying and assignment are legal on the type: template <typename T> void swap(T& a, T& b) { if (false) // dead code, never executed { T c(a); // copy-constructible? a = b; // assignable? } unsigned char c[sizeof(T)]; std::memcpy( c, &a, sizeof(T)); std::memcpy(&a, &b, sizeof(T)); std::memcpy(&b, c, sizeof(T)); } Any decent compiler can trivially get rid of the dead code. (There are probably better ways to check the "swap conformance", but that is not the point. What matters is that it's possible). Second, some types might perform "unusual" actions in the copy constructor and copy assignment operator. For example, they might notify observers of their change. I deem this a minor issue, because such kinds of objects probably should not have provided copy operations in the first place. Please let me know what you think of this approach to swapping. Would it work in practice? Would you use it? Can you identify library types where this would break? Do you see additional problems? Discuss!

  Read the article

• vmware esx licensing limit on vCPUs per VM

  - by maruti

  when a server has more than 8 cores per CPU (total 16 logical procs) and ESX standard license is applied, what does it mean for VM performance? Since each VM on host is allowed only 4 vCPUs max VMWare ESX/ESXi limits the no of vCPUs per guest VM depending on the license: standard Lic = 4 vCPU Advanced Lic = 4 since i dont know exact number is there need to upgrade to Advanced version for any perf benefits if none of VMs have workloads that need more than 4 vCPUs?

  Read the article

• Running resize2fs on /

  - by Paul Steckler

  I'm trying to resize an ext4 filesystem on a Fedora 11 box. Using fsdisk and lvm, I was able to grow the partition and logical volume containing the filesystem. When I try to run resize2fs on the device containing the filesystem (/dev/sda2 in this case), I get: "Device or resource busy while trying to open /dev/sda2, Couldn't find valid filesystem superblock" I've tried this from a rescue disk that doesn't have the filesystem mounted, no joy. Maybe resize2fs doesn't know about ext4?

  Read the article

• CUPS Web Admin Error 500 Unknown

  - by Floyd Resler

  I keep getting a 500 Unknown error whenever I navigate off the home page of my CUPS web admin. I'm sure I have something misconfigured but I'm not sure what. Here's my configuration: # # "$Id: cupsd.conf.in 8805 2009-08-31 16:34:06Z mike $" # # Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a # complete description of this file. # # Log general information in error_log - change "warn" to "debug" # for troubleshooting... LogLevel warn # Administrator user group... SystemGroup lpadmin sys root # Only listen for connections from the local machine. Listen 192.168.6.101:631 Listen /var/run/cups/cups.sock ServerName 192.168.6.101 # Show shared printers on the local network. Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS BrowseAddress 192.168.6.255 # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... Order allow,deny Allow From All Allow From 127.0.0.1 # Restrict access to the admin pages... AuthType Default Require user @SYSTEM Order allow,deny Allow From All Allow From 127.0.0.1 # Restrict access to configuration files... AuthType Default Require user @SYSTEM Order allow,deny Allow From All Allow From 127.0.0.1 # Set the default printer/job policies... # Job-related operations must be done by the owner or an administrator... Require user @OWNER @SYSTEM Order deny,allow # All administration operations require an administrator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # All printer operations require a printer operator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # Only the owner or an administrator can cancel or authenticate a job... Require user @OWNER @SYSTEM Order deny,allow Order deny,allow # Set the authenticated printer/job policies... # Job-related operations must be done by the owner or an administrator... AuthType Default Order deny,allow AuthType Default Require user @OWNER @SYSTEM Order deny,allow # All administration operations require an administrator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # All printer operations require a printer operator to authenticate... AuthType Default Require user @SYSTEM Order deny,allow # Only the owner or an administrator can cancel or authenticate a job... AuthType Default Require user @OWNER @SYSTEM Order deny,allow Order deny,allow # # End of "$Id: cupsd.conf.in 8805 2009-08-31 16:34:06Z mike $". #

  Read the article

• Is it possible to either abort or interrupt and later continue a lvconvert -m1 operation?

  - by SLi

  I have run the command lvconvert -m1 rootvg/newroot /dev/sdb to convert a linear logical volume to a mirrored one. The operation has not yet finished; I interrupted the command with ctrl-c at around 10% mark, but the operation seems to be running in the background anyway. Is it possible to either 1) Abort the lvconvert operation and revert to the state before it? (This would be my preferred option) 2) To safely interrupt the operation and resume it later?

  Read the article

• How to create a snapshot volume to a remote server?

  - by Purres

  I want to backup a few virtual machines to a backup server. Here're the backup steps. suspend a virtual machine create a snapshot of the virtual machine using lvcreate -s resume a virtual machine dd if=/virtual_machine_path | lzop > /temp/backup.lzo rsync /temp/backup.lzo -e "ssh " 1.2.3.4:/backup_path/ However, the hypervisor server doesn't have enough hard disk space to create a snapshot in step 2. Is there a way to create a logical volume snapshot to a remote server?

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >