Search Results

Search found 2187 results on 88 pages for 'ends'.

Page 80/88 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • techniques for an AI for a highly cramped turn-based tactics game

    - by Adam M.
    I'm trying to write an AI for a tactics game in the vein of Final Fantasy Tactics or Vandal Hearts. I can't change the game rules in any way, only upgrade the AI. I have experience programming AI for classic board games (basically minimax and its variants), but I think the branching factor is too great for the approach to be reasonable here. I'll describe the game and some current AI flaws that I'd like to fix. I'd like to hear ideas for applicable techniques. I'm a decent enough programmer, so I only need the ideas, not an implementation (though that's always appreciated). I'd rather not expend effort chasing (too many) dead ends, so although speculation and brainstorming are good and probably helpful, I'd prefer to hear from somebody with actual experience solving this kind of problem. For those who know it, the game is the land battle mini-game in Sid Meier's Pirates! (2004) and you can skim/skip the next two paragraphs. For those who don't, here's briefly how it works. The battle is turn-based and takes place on a 16x16 grid. There are three terrain types: clear (no hindrance), forest (hinders movement, ranged attacks, and sight), and rock (impassible, but does not hinder attacks or sight). The map is randomly generated with roughly equal amounts of each type of terrain. Because there are many rock and forest tiles, movement is typically very cramped. This is tactically important. The terrain is not flat; higher terrain gives minor bonuses. The terrain is known to both sides. The player is always the attacker and the AI is always the defender, so it's perfectly valid for the AI to set up a defensive position and just wait. The player wins by killing all defenders or by getting a unit to the city gates (a tile on the other side of the map). There are very few units on each side, usually 4-8. Because of this, it's crucial not to take damage without gaining some advantage from it. Units can take multiple actions per turn. All units on one side move before any units on the other side. Order of execution is important, and interleaving of actions between units is often useful. Units have melee and ranged attacks. Melee attacks vary widely in strength; ranged attacks have the same strength but vary in range. The main challenges I face are these: Lots of useful move combinations start with a "useless" move that gains no immediate advantage, or even loses advantage, in order to set up a powerful flank attack in the future. And, since the player units are stronger and have longer range, the AI pretty much always has to take some losses before they can start to gain kills. The AI must be able to look ahead to distinguish between sacrificial actions that provide a future benefit and those that don't. Because the terrain is so cramped, most of the tactics come down to achieving good positioning with multiple units that work together to defend an area. For instance, two defenders can often dominate a narrow pass by positioning themselves so an enemy unit attempting to pass must expose itself to a flank attack. But one defender in the same pass would be useless, and three units can defend a slightly larger pass. Etc. The AI should be able to figure out where the player must go to reach the city gates and how to best position its few units to cover the approaches, shifting, splitting, or combining them appropriately as the player moves. Because flank attacks are extremely deadly (and engineering flank attacks is key to the player strategy), the AI should be competent at moving its units so that they cover each other's flanks unless the sacrifice of a unit would give a substantial benefit. They should also be able to force flank attacks on players, for instance by threatening a unit from two different directions such that responding to one threat exposes the flank to the other. The AI should attack if possible, but sometimes there are no good ways to approach the player's position. In that case, the AI should be able to recognize this and set up a defensive position of its own. But the AI shouldn't be vulnerable to a trivial exploit where the player repeatedly opens and closes a hole in his defense and shoots at the AI as it approaches and retreats. That is, the AI should ideally be able to recognize that the player is capable of establishing a solid defense of an area, even if the defense is not currently in place. (I suppose if a good unit allocation algorithm existed, as needed for the second bullet point, the AI could run it on the player units to see where they could defend.) Because it's important to choose a good order of action and interleave actions between units, it's not as simple as just finding the best move for each unit in turn. All of these can be accomplished with a minimax search in theory, but the search space is too large, so specialized techniques are needed. I thought about techniques such as influence mapping, but I don't see how to use the technique to great effect. I thought about assigning goals to the units. This can help them work together in some limited way, and the problem of "how do I accomplish this goal?" is easier to solve than "how do I win this battle?", but assigning good goals is a hard problem in itself, because it requires knowing whether the goal is achievable and whether it's a good use of resources. So, does anyone have specific ideas for techniques that can help cleverize this AI? Update: I found a related question on Stackoverflow: http://stackoverflow.com/questions/3133273/ai-for-a-final-fantasy-tactics-like-game The selected answer gives a decent approach to choosing between alternative actions, but it doesn't seem to have much ability to look into the future and discern beneficial sacrifices from wasteful ones. It also focuses on a single unit at a time and it's not clear how it could be extended to support cooperation between units in defending or attacking.

    Read the article

  • How to Achieve OC4J RMI Load Balancing

    - by fip
    This is an old, Oracle SOA and OC4J 10G topic. In fact this is not even a SOA topic per se. Questions of RMI load balancing arise when you developed custom web applications accessing human tasks running off a remote SOA 10G cluster. Having returned from a customer who faced challenges with OC4J RMI load balancing, I felt there is still some confusions in the field how OC4J RMI load balancing work. Hence I decide to dust off an old tech note that I wrote a few years back and share it with the general public. Here is the tech note: Overview A typical use case in Oracle SOA is that you are building web based, custom human tasks UI that will interact with the task services housed in a remote BPEL 10G cluster. Or, in a more generic way, you are just building a web based application in Java that needs to interact with the EJBs in a remote OC4J cluster. In either case, you are talking to an OC4J cluster as RMI client. Then immediately you must ask yourself the following questions: 1. How do I make sure that the web application, as an RMI client, even distribute its load against all the nodes in the remote OC4J cluster? 2. How do I make sure that the web application, as an RMI client, is resilient to the node failures in the remote OC4J cluster, so that in the unlikely case when one of the remote OC4J nodes fail, my web application will continue to function? That is the topic of how to achieve load balancing with OC4J RMI client. Solutions You need to configure and code RMI load balancing in two places: 1. Provider URL can be specified with a comma separated list of URLs, so that the initial lookup will land to one of the available URLs. 2. Choose a proper value for the oracle.j2ee.rmi.loadBalance property, which, along side with the PROVIDER_URL property, is one of the JNDI properties passed to the JNDI lookup.(http://docs.oracle.com/cd/B31017_01/web.1013/b28958/rmi.htm#BABDGFBI) More details below: About the PROVIDER_URL The JNDI property java.name.provider.url's job is, when the client looks up for a new context at the very first time in the client session, to provide a list of RMI context The value of the JNDI property java.name.provider.url goes by the format of a single URL, or a comma separate list of URLs. A single URL. For example: opmn:ormi://host1:6003:oc4j_instance1/appName1 A comma separated list of multiple URLs. For examples:  opmn:ormi://host1:6003:oc4j_instanc1/appName, opmn:ormi://host2:6003:oc4j_instance1/appName, opmn:ormi://host3:6003:oc4j_instance1/appName When the client looks up for a new Context the very first time in the client session, it sends a query against the OPMN referenced by the provider URL. The OPMN host and port specifies the destination of such query, and the OC4J instance name and appName are actually the “where clause” of the query. When the PROVIDER URL reference a single OPMN server Let's consider the case when the provider url only reference a single OPMN server of the destination cluster. In this case, that single OPMN server receives the query and returns a list of the qualified Contexts from all OC4Js within the cluster, even though there is a single OPMN server in the provider URL. A context represent a particular starting point at a particular server for subsequent object lookup. For example, if the URL is opmn:ormi://host1:6003:oc4j_instance1/appName, then, OPMN will return the following contexts: appName on oc4j_instance1 on host1 appName on oc4j_instance1 on host2, appName on oc4j_instance1 on host3,  (provided that host1, host2, host3 are all in the same cluster) Please note that One OPMN will be sufficient to find the list of all contexts from the entire cluster that satisfy the JNDI lookup query. You can do an experiment by shutting down appName on host1, and observe that OPMN on host1 will still be able to return you appname on host2 and appName on host3. When the PROVIDER URL reference a comma separated list of multiple OPMN servers When the JNDI propery java.naming.provider.url references a comma separated list of multiple URLs, the lookup will return the exact same things as with the single OPMN server: a list of qualified Contexts from the cluster. The purpose of having multiple OPMN servers is to provide high availability in the initial context creation, such that if OPMN at host1 is unavailable, client will try the lookup via OPMN on host2, and so on. After the initial lookup returns and cache a list of contexts, the JNDI URL(s) are no longer used in the same client session. That explains why removing the 3rd URL from the list of JNDI URLs will not stop the client from getting the EJB on the 3rd server. About the oracle.j2ee.rmi.loadBalance Property After the client acquires the list of contexts, it will cache it at the client side as “list of available RMI contexts”.  This list includes all the servers in the destination cluster. This list will stay in the cache until the client session (JVM) ends. The RMI load balancing against the destination cluster is happening at the client side, as the client is switching between the members of the list. Whether and how often the client will fresh the Context from the list of Context is based on the value of the  oracle.j2ee.rmi.loadBalance. The documentation at http://docs.oracle.com/cd/B31017_01/web.1013/b28958/rmi.htm#BABDGFBI list all the available values for the oracle.j2ee.rmi.loadBalance. Value Description client If specified, the client interacts with the OC4J process that was initially chosen at the first lookup for the entire conversation. context Used for a Web client (servlet or JSP) that will access EJBs in a clustered OC4J environment. If specified, a new Context object for a randomly-selected OC4J instance will be returned each time InitialContext() is invoked. lookup Used for a standalone client that will access EJBs in a clustered OC4J environment. If specified, a new Context object for a randomly-selected OC4J instance will be created each time the client calls Context.lookup(). Please note the regardless of the setting of oracle.j2ee.rmi.loadBalance property, the “refresh” only occurs at the client. The client can only choose from the "list of available context" that was returned and cached from the very first lookup. That is, the client will merely get a new Context object from the “list of available RMI contexts” from the cache at the client side. The client will NOT go to the OPMN server again to get the list. That also implies that if you are adding a node to the server cluster AFTER the client’s initial lookup, the client would not know it because neither the server nor the client will initiate a refresh of the “list of available servers” to reflect the new node. About High Availability (i.e. Resilience Against Node Failure of Remote OC4J Cluster) What we have discussed above is about load balancing. Let's also discuss high availability. This is how the High Availability works in RMI: when the client use the context but get an exception such as socket is closed, it knows that the server referenced by that Context is problematic and will try to get another unused Context from the “list of available contexts”. Again, this list is the list that was returned and cached at the very first lookup in the entire client session.

    Read the article

  • xml file save/read error (making a highscore system for XNA game)

    - by Eddy
    i get an error after i write player name to the file for second or third time (An unhandled exception of type 'System.InvalidOperationException' occurred in System.Xml.dll Additional information: There is an error in XML document (18, 17).) (in highscores load method In data = (HighScoreData)serializer.Deserialize(stream); it stops) the problem is that some how it adds additional "" at the end of my .dat file could anyone tell me how to fix this? the file before save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>neil</string> <string>shawn</string> <string>mark</string> <string>cindy</string> <string>sam</string> </PlayerName> <Score> <int>200</int> <int>180</int> <int>150</int> <int>100</int> <int>50</int> </Score> <Count>5</Count> </HighScoreData> the file after save looks: <?xml version="1.0"?> <HighScoreData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <PlayerName> <string>Nick</string> <string>Nick</string> <string>neil</string> <string>shawn</string> <string>mark</string> </PlayerName> <Score> <int>210</int> <int>210</int> <int>200</int> <int>180</int> <int>150</int> </Score> <Count>5</Count> </HighScoreData>> the part of my code that does all of save load to xml is: DECLARATIONS PART [Serializable] public struct HighScoreData { public string[] PlayerName; public int[] Score; public int Count; public HighScoreData(int count) { PlayerName = new string[count]; Score = new int[count]; Count = count; } } IAsyncResult result = null; bool inputName; HighScoreData data; int Score = 0; public string NAME; public string HighScoresFilename = "highscores.dat"; Game1 constructor public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; Width = graphics.PreferredBackBufferWidth = 960; Height = graphics.PreferredBackBufferHeight =640; GamerServicesComponent GSC = new GamerServicesComponent(this); Components.Add(GSC); } Inicialize function (end of it) protected override void Initialize() { //other game code base.Initialize(); string fullpath =Path.Combine(HighScoresFilename); if (!File.Exists(fullpath)) { //If the file doesn't exist, make a fake one... // Create the data to save data = new HighScoreData(5); data.PlayerName[0] = "neil"; data.Score[0] = 200; data.PlayerName[1] = "shawn"; data.Score[1] = 180; data.PlayerName[2] = "mark"; data.Score[2] = 150; data.PlayerName[3] = "cindy"; data.Score[3] = 100; data.PlayerName[4] = "sam"; data.Score[4] = 50; SaveHighScores(data, HighScoresFilename); } } all methods for loading saving and output public static void SaveHighScores(HighScoreData data, string filename) { // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file, creating it if necessary FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate); try { // Convert the object to XML data and put it in the stream XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); serializer.Serialize(stream, data); } finally { // Close the file stream.Close(); } } /* Load highscores */ public static HighScoreData LoadHighScores(string filename) { HighScoreData data; // Get the path of the save game string fullpath = Path.Combine("highscores.dat"); // Open the file FileStream stream = File.Open(fullpath, FileMode.OpenOrCreate, FileAccess.Read); try { // Read the data from the file XmlSerializer serializer = new XmlSerializer(typeof(HighScoreData)); data = (HighScoreData)serializer.Deserialize(stream);//this is the line // where program gives an error } finally { // Close the file stream.Close(); } return (data); } /* Save player highscore when game ends */ private void SaveHighScore() { // Create the data to saved HighScoreData data = LoadHighScores(HighScoresFilename); int scoreIndex = -1; for (int i = 0; i < data.Count ; i++) { if (Score > data.Score[i]) { scoreIndex = i; break; } } if (scoreIndex > -1) { //New high score found ... do swaps for (int i = data.Count - 1; i > scoreIndex; i--) { data.PlayerName[i] = data.PlayerName[i - 1]; data.Score[i] = data.Score[i - 1]; } data.PlayerName[scoreIndex] = NAME; //Retrieve User Name Here data.Score[scoreIndex] = Score; // Retrieve score here SaveHighScores(data, HighScoresFilename); } } /* Iterate through data if highscore is called and make the string to be saved*/ public string makeHighScoreString() { // Create the data to save HighScoreData data2 = LoadHighScores(HighScoresFilename); // Create scoreBoardString string scoreBoardString = "Highscores:\n\n"; for (int i = 0; i<5;i++) { scoreBoardString = scoreBoardString + data2.PlayerName[i] + "-" + data2.Score[i] + "\n"; } return scoreBoardString; } when ill make this work i will start this code when i call game over (now i start it when i press some buttons, so i could test it faster) public void InputYourName() { if (result == null && !Guide.IsVisible) { string title = "Name"; string description = "Write your name in order to save your Score"; string defaultText = "Nick"; PlayerIndex playerIndex = new PlayerIndex(); result= Guide.BeginShowKeyboardInput(playerIndex, title, description, defaultText, null, null); // NAME = result.ToString(); } if (result != null && result.IsCompleted) { NAME = Guide.EndShowKeyboardInput(result); result = null; inputName = false; SaveHighScore(); } } this where i call output to the screen (ill call this in highscores meniu section when i am done with debugging) spriteBatch.DrawString(Font1, "" + makeHighScoreString(),new Vector2(500,200), Color.White); }

    Read the article

  • Custom Lookup Provider For NetBeans Platform CRUD Tutorial

    - by Geertjan
    For a long time I've been planning to rewrite the second part of the NetBeans Platform CRUD Application Tutorial to integrate the loosely coupled capabilities introduced in a seperate series of articles based on articles by Antonio Vieiro (a great series, by the way). Nothing like getting into the Lookup stuff right from the get go (rather than as an afterthought)! The question, of course, is how to integrate the loosely coupled capabilities in a logical way within that tutorial. Today I worked through the tutorial from scratch, up until the point where the prototype is completed, i.e., there's a JTextArea displaying data pulled from a database. That brought me to the place where I needed to be. In fact, as soon as the prototype is completed, i.e., the database connection has been shown to work, the whole story about Lookup.Provider and InstanceContent should be introduced, so that all the subsequent sections, i.e., everything within "Integrating CRUD Functionality" will be done by adding new capabilities to the Lookup.Provider. However, before I perform open heart surgery on that tutorial, I'd like to run the scenario by all those reading this blog who understand what I'm trying to do! (I.e., probably anyone who has read this far into this blog entry.) So, this is what I propose should happen and in this order: Point out the fact that right now the database access code is found directly within our TopComponent. Not good. Because you're mixing view code with data code and, ideally, the developers creating the user interface wouldn't need to know anything about the data access layer. Better to separate out the data access code into a separate class, within the CustomerLibrary module, i.e., far away from the module providing the user interface, with this content: public class CustomerDataAccess { public List<Customer> getAllCustomers() { return Persistence.createEntityManagerFactory("CustomerLibraryPU"). createEntityManager().createNamedQuery("Customer.findAll").getResultList(); } } Point out the fact that there is a concept of "Lookup" (which readers of the tutorial should know about since they should have followed the NetBeans Platform Quick Start), which is a registry into which objects can be published and to which other objects can be listening. In the same way as a TopComponent provides a Lookup, as demonstrated in the NetBeans Platform Quick Start, your own object can also provide a Lookup. So, therefore, let's provide a Lookup for Customer objects.  import org.openide.util.Lookup; import org.openide.util.lookup.AbstractLookup; import org.openide.util.lookup.InstanceContent; public class CustomerLookupProvider implements Lookup.Provider { private Lookup lookup; private InstanceContent instanceContent; public CustomerLookupProvider() { // Create an InstanceContent to hold capabilities... instanceContent = new InstanceContent(); // Create an AbstractLookup to expose the InstanceContent... lookup = new AbstractLookup(instanceContent); // Add a "Read" capability to the Lookup of the provider: //...to come... // Add a "Update" capability to the Lookup of the provider: //...to come... // Add a "Create" capability to the Lookup of the provider: //...to come... // Add a "Delete" capability to the Lookup of the provider: //...to come... } @Override public Lookup getLookup() { return lookup; } } Point out the fact that, in the same way as we can publish an object into the Lookup of a TopComponent, we can now also publish an object into the Lookup of our CustomerLookupProvider. Instead of publishing a String, as in the NetBeans Platform Quick Start, we'll publish an instance of our own type. And here is the type: public interface ReadCapability { public void read() throws Exception; } And here is an implementation of our type added to our Lookup: public class CustomerLookupProvider implements Lookup.Provider { private Set<Customer> customerSet; private Lookup lookup; private InstanceContent instanceContent; public CustomerLookupProvider() { customerSet = new HashSet<Customer>(); // Create an InstanceContent to hold capabilities... instanceContent = new InstanceContent(); // Create an AbstractLookup to expose the InstanceContent... lookup = new AbstractLookup(instanceContent); // Add a "Read" capability to the Lookup of the provider: instanceContent.add(new ReadCapability() { @Override public void read() throws Exception { ProgressHandle handle = ProgressHandleFactory.createHandle("Loading..."); handle.start(); customerSet.addAll(new CustomerDataAccess().getAllCustomers()); handle.finish(); } }); // Add a "Update" capability to the Lookup of the provider: //...to come... // Add a "Create" capability to the Lookup of the provider: //...to come... // Add a "Delete" capability to the Lookup of the provider: //...to come... } @Override public Lookup getLookup() { return lookup; } public Set<Customer> getCustomers() { return customerSet; } } Point out that we can now create a new instance of our Lookup (in some other module, so long as it has a dependency on the module providing the CustomerLookupProvider and the ReadCapability), retrieve the ReadCapability, and then do something with the customers that are returned, here in the rewritten constructor of the TopComponent, without needing to know anything about how the database access is actually achieved since that is hidden in the implementation of our type, above: public CustomerViewerTopComponent() { initComponents(); setName(Bundle.CTL_CustomerViewerTopComponent()); setToolTipText(Bundle.HINT_CustomerViewerTopComponent()); // EntityManager entityManager = Persistence.createEntityManagerFactory("CustomerLibraryPU").createEntityManager(); // Query query = entityManager.createNamedQuery("Customer.findAll"); // List<Customer> resultList = query.getResultList(); // for (Customer c : resultList) { // jTextArea1.append(c.getName() + " (" + c.getCity() + ")" + "\n"); // } CustomerLookupProvider lookup = new CustomerLookupProvider(); ReadCapability rc = lookup.getLookup().lookup(ReadCapability.class); try { rc.read(); for (Customer c : lookup.getCustomers()) { jTextArea1.append(c.getName() + " (" + c.getCity() + ")" + "\n"); } } catch (Exception ex) { Exceptions.printStackTrace(ex); } } Does the above make as much sense to others as it does to me, including the naming of the classes? Feedback would be appreciated! Then I'll integrate into the tutorial and do the same for the other sections, i.e., "Create", "Update", and "Delete". (By the way, of course, the tutorial ends up showing that, rather than using a JTextArea to display data, you can use Nodes and explorer views to do so.)

    Read the article

  • Evaluating Solutions to Manage Product Compliance? Don't Wait Much Longer

    - by Kerrie Foy
    Depending on severity, product compliance issues can cause all sorts of problems from run-away budgets to business closures. But effective policies and safeguards can create a strong foundation for innovation, productivity, market penetration and competitive advantage. If you’ve been putting off a systematic approach to product compliance, it is time to reconsider that decision, or indecision. Why now?  No matter what industry, companies face a litany of worldwide and regional regulations that require proof of product compliance and environmental friendliness for market access.  For example, Restriction of Hazardous Substances (RoHS) is a regulation that restricts the use of six dangerous materials used in the manufacture of electronic and electrical equipment.  ROHS was originally adopted by the European Union in 2003 for implementation in 2006, and it has evolved over time through various regional versions for North America, China, Japan, Korea, Norway and Turkey.  In addition, the RoHS directive allowed for material exemptions used in Medical Devices, but that exemption ends in 2014.   Additional regulations worth watching are the Battery Directive, Waste Electrical and Electronic Equipment (WEEE), and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives.  Additional evolving regulations are coming from governing bodies like the Food and Drug Administration (FDA) and the International Organization for Standardization (ISO). Corporate sustainability initiatives are also gaining urgency and influencing product design. In a survey of 405 corporations in the Global 500 by Carbon Disclosure Project, co-written by PwC (CDP Global 500 Climate Change Report 2012 entitled Business Resilience in an Uncertain, Resource-Constrained World), 48% of the respondents indicated they saw potential to create new products and business services as a response to climate change. Just 21% reported a dedicated budget for the research. However, the report goes on to explain that those few companies are winning over new customers and driving additional profits by exploiting their abilities to adapt to environmental needs. The article cites Dell as an example – Dell has invested in research to develop new products designed to reduce its customers’ emissions by more than 10 million metric tons of CO2e per year. This reduction in emissions should save Dell’s customers over $1billion per year as a result! Over time we expect to see many additional companies prove that eco-design provides marketplace benefits through differentiation and direct customer value. How do you meet compliance requirements and also successfully invest in eco-friendly designs? No doubt companies struggle to answer this question. After all, the journey to get there may involve transforming business models, go-to-market strategies, supply networks, quality assurance policies and compliance processes per the rapidly evolving global and regional directives. There may be limited executive focus on the initiative, inability to quantify noncompliance, or not enough resources to justify investment. To make things even more difficult to address, compliance responsibility can be a passionate topic within an organization, making the prospect of change on an enterprise scale problematic and time-consuming. Without a single source of truth for product data and without proper processes in place, ensuring product compliance burgeons into a crushing task that is cost-prohibitive and overwhelming to an organization. With all the overhead, certain markets or demographics become simply inaccessible. Therefore, the risk to consumer goodwill and satisfaction, revenue, business continuity, and market potential is too great not to solve the compliance challenge. Companies are beginning to adapt and even thrive in today’s highly regulated and transparent environment by implementing systematic approaches to product compliance that are more than functional bandages but revenue-generating engines. Consider partnering with Oracle to help you address your compliance needs. Many of the world’s most innovative leaders and pioneers are leveraging Oracle’s Agile Product Lifecycle Management (PLM) portfolio of enterprise applications to manage the product value chain, centralize product data, automate processes, and launch more eco-friendly products to market faster.   Particularly, the Agile Product Governance & Compliance (PG&C) solution provides out-of-the-box functionality to integrate actionable regulatory information into the enterprise product record from the ideation to the disposal/recycling phase. Agile PG&C makes it possible to efficiently manage compliance per corporate green initiatives as well as regional and global directives. Options are critical, but so is ease-of-use. Anyone who’s grappled with compliance policy knows legal interpretation plays a major role in determining how an organization responds to regulation. Agile PG&C gives you the freedom to configure product compliance per your needs, while maintaining rigorous control over the product record in an easy-to-use interface that facilitates adoption efforts. It allows you to assign regulations as specifications for a part or BOM roll-up. Each specification has a threshold value that alerts you to a non-compliance issue if the threshold value is exceeded. Set however many regulations as specifications you need to make sure a product can be sold in your target countries. Another option is to implement like one of our leading consumer electronics customers and define your own “catch-all” specification to ensure compliance in all markets. You can give your suppliers secure access to enter their component data or integrate a third party’s data. With Agile PG&C you are able to design compliance earlier into your products to reduce cost and improve quality downstream when stakes are higher. Agile PG&C is a comprehensive solution that makes product compliance more reliable and efficient. Throughout product lifecycles, use the solution to support full material disclosures, efficiently manage declarations with your suppliers, feed compliance data into a corrective action if a product must be changed, and swiftly satisfy audits by showing all due diligence tracked in one solution. Given the compounding regulation and consumer focus on urgent environmental issues, now is the time to act. Implementing an enterprise, systematic approach to product compliance is a competitive investment. From the start, Agile Product Governance & Compliance enables companies to confidently design for compliance and sustainability, reduce the cost of compliance, minimize the risk of business interruption, deliver responsible products, and inspire new innovation.  Don’t wait any longer! To find out more about Agile Product Governance & Compliance download the data sheet, contact your sales representative, or call Oracle at 1-800-633-0738. Many thanks to Shane Goodwin, Senior Manager, Oracle Agile PLM Product Management, for contributions to this article. 

    Read the article

  • Merge replication stopping without errors in SQL 2008 R2

    - by Rob Farley
    A non-SQL MVP friend of mine, who also happens to be a client, asked me for some help again last week. I was planning on writing this up even before Rob Volk (@sql_r) listed his T-SQL Tuesday topic for this month. Earlier in the year, I (well, LobsterPot Solutions, although I’d been the person mostly involved) had helped out with a merge replication problem. The Merge Agent on the subscriber was just stopping every time, shortly after it started. With no errors anywhere – not in the Windows Event Log, the SQL Agent logs, not anywhere. We’d managed to get the system working again, but didn’t have a good reason about what had happened, and last week, the problem occurred again. I asked him about writing up the experience in a blog post, largely because of the red herrings that we encountered. It was an interesting experience for me, also because I didn’t end up touching my computer the whole time – just tapping on my phone via Twitter and Live Msgr. You see, the thing with replication is that a useful troubleshooting option is to reinitialise the thing. We’d done that last time, and it had started to work again – eventually. I say eventually, because the link being used between the sites is relatively slow, and it took a long while for the initialisation to finish. Meanwhile, we’d been doing some investigation into what the problem could be, and were suitably pleased when the problem disappeared. So I got a message saying that a replication problem had occurred again. Reinitialising wasn’t going to be an option this time either. In this scenario, the subscriber having the problem happened to be in a different domain to the publisher. The other subscribers (within the domain) were fine, just this one in a different domain had the problem. Part of the problem seemed to be a log file that wasn’t being backed up properly. They’d been trying to back up to a backup device that had a corruption, and the log file was growing. Turned out, this wasn’t related to the problem, but of course, any time you’re troubleshooting and you see something untoward, you wonder. Having got past that problem, my next thought was that perhaps there was a problem with the account being used. But the other subscribers were using the same account, without any problems. The client pointed out that that it was almost exactly six months since the last failure (later shown to be a complete red herring). It sounded like something might’ve expired. Checking through certificates and trusts showed no sign of anything, and besides, there wasn’t a problem running a command-prompt window using the account in question, from the subscriber box. ...except that when he ran the sqlcmd –E –S servername command I recommended, it failed with a Named Pipes error. I’ve seen problems with firewalls rejecting connections via Named Pipes but letting TCP/IP through, so I got him to look into SQL Configuration Manager to see what kind of connection was being preferred... Everything seemed fine. And strangely, he could connect via Management Studio. Turned out, he had a typo in the servername of the sqlcmd command. That particular red herring must’ve been reflected in his cheeks as he told me. During the time, I also pinged a friend of mine to find out who I should ask, and Ted Kruger (@onpnt) ‘s name came up. Ted (and thanks again, Ted – really) reconfirmed some of my thoughts around the idea of an account expiring, and also suggesting bumping up the logging to level 4 (2 is Verbose, 4 is undocumented ridiculousness). I’d just told the client to push the logging up to level 2, but the log file wasn’t appearing. Checking permissions showed that the user did have permission on the folder, but still no file was appearing. Then it was noticed that the user had been switched earlier as part of the troubleshooting, and switching it back to the real user caused the log file to appear. Still no errors. A lot more information being pushed out, but still no errors. Ted suggested making sure the FQDNs were okay from both ends, in case the servers were unable to talk to each other. DNS problems can lead to hassles which can stop replication from working. No luck there either – it was all working fine. Another server started to report a problem as well. These two boxes were both SQL 2008 R2 (SP1), while the others, still working, were SQL 2005. Around this time, the client tried an idea that I’d shown him a few years ago – using a Profiler trace to see what was being called on the servers. It turned out that the last call being made on the publisher was sp_MSenumschemachange. A quick interwebs search on that showed a problem that exists in SQL Server 2008 R2, when stored procedures have more than 4000 characters. Running that stored procedure (with the same parameters) manually on SQL 2005 listed three stored procedures, the first of which did indeed have more than 4000 characters. Still no error though, and the problem as listed at http://support.microsoft.com/kb/2539378 describes an error that should occur in the Event log. However, this problem is the type of thing that is fixed by a reinitialisation (because it doesn’t need to send the procedure change across as a transaction). And a look in the change history of the long stored procs (you all keep them, right?), showed that the problem from six months earlier could well have been down to this too. Applying SP2 (with sufficient paranoia about backups and how to get back out again if necessary) fixed the problem. The stored proc changes went through immediately after the service pack was applied, and it’s been running happily since. The funny thing is that I didn’t solve the problem. He had put the Profiler trace on the server, and had done the search that found a forum post pointing at this particular problem. I’d asked Ted too, and although he’d given some useful information, nothing that he’d come up with had actually been the solution either. Sometimes, asking for help is the most useful thing you can do. Often though, you don’t end up getting the help from the person you asked – the sounding board is actually what you need. @rob_farley

    Read the article

  • CodePlex Daily Summary for Monday, July 15, 2013

    CodePlex Daily Summary for Monday, July 15, 2013Popular ReleasesMVC Forum: MVC Forum v1.0: Finally version 1.0 is here! We have been fixing a few bugs, and making sure the release is as stable as possible. We have also changed the way configuration of the application works, mostly how to add your own code or replace some of the standard code with your own. If you download and use our software, please give us some sort of feedback, good or bad!SharePoint 2013 TypeScript Definitions: Release 1.1: TypeScript 0.9 support SharePoint TypeScript Definitions are now compliant with the new version of TypeScript TypeScript generics are now used for defining collection classes (derivatives of SP.ClientCollection object) Improved coverage Added mQuery definitions (m$) Added SPClientAutoFill definitions SP.Utilities namespace is now fully covered SP.UI modal dialog definitions improved CSR definitions improved, added some missing methods and context properties, mostly related to list ...GoAgent GUI: GoAgent GUI ??? 1.0.0: ????GoAgent GUI????,???????????.Net Framework 4.0 ???????: Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 ???????: Windows 8.1 Preview (x86/x64) ???????: Windows XP ????: ????????GoAgent????,????????,?????????????,???????????????????,??????????,????。PiGraph: PiGraph 2.0.8.13: C?p nh?t:Các l?i dã s?a: S?a l?i không nh?p du?c s? âm. L?i tabindex trong giao di?n Thêm hàm Các l?i chua kh?c ph?c: L?i ghi chú nh?p nháy màu. L?i khung ghi chú vu?t ra kh?i biên khi luu file. Luu ý:N?u không kh?i d?ng duoc chuong trình, b?n nên c?p nh?t driver card d? h?a phiên b?n m?i nh?t: AMD Graphics Drivers NVIDIA Driver Xem yêu c?u h? th?ngD3D9Client: D3D9Client R12 for Orbiter Beta: D3D9Client release for orbiter BetaVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Project Server 2013 Event Handler Admin Tool: PSI Event Admin Tool: Download & exract the File. Use LoggerAdmin to upload the event handlers in project server 2013. PSIEventLogger\LoggerAdmin\bin\DebugGherkin editor: Gherkin Editor Beta 2: Fix issue #7 and add some refactoring and code cleanupNew-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 PowerShell Script v1.2: Show nuget gallery to push to when prompting user if they want to push their package.Site Templates By Steve: SharePoint 2010 CORE Site Theme By Steve WSP: Great Site Theme to start with from Steve. See project home page for install instructions. This is a nice centered, mega-menu, fixed width masterpage with styles. Remember to update the mega menu lists.SharePoint Solution Installer: SharePoint Solution Installer V1.2.8: setup2013.exe now supports CompatibilityLevel to target specific hive Use setup.exe for SP2007 & SP2010. Use setup2013.exe for SP2013.TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Advanced Resource Tab for Blend: Advanced Resource Tab: This is the first alpha release of the advanced resource tab for Blend for Visual Studio 2012.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsLINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneNew Projects[.Net Intl] harroc_c;mallar_a;olouso_f: The goal of this project is to create a web crawler and a web front who allows you to search in your index. You will create a mini (or large!) search engine basButterfly Storage: Butterfly Storage is a data access technology based on object-oriented database model for Windows Store applications.KaveCompany: KaveCompleave that girl alone: a team project!MyClrProfiler: This project helps you learn about and develop your own CLR profiler.NETDeob: Deobfuscate obfuscated .NET files easilyProgram stomatologie: SummarySimple Graph Library: Simple portable class library for graphs data structures. .NET, Silverlight 4/5, Windows Phone, Windows RT, Xbox 360T6502 Emulator: T6502 is a 6502 emulator written in TypeScript using AngularJS. The goal is well-organized, readable code over performance.WP8 File Access Webserver: C# HTTP server and web application on Windows Phone 8. Implements file access, browsing and downloading.wpadk: wpadk????wp7?????? ?????????,?????、SDK、wpadk?????????????。??????????????????。??????????????????,????wpadk?????????????????????????????????????。xlmUnit: xlmUnit, Unit Testing

    Read the article

  • Calculated Fields - Idiosyncracies

    - by PointsToShare
    © 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula:  IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula:  IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula:  IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula  =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own!  That’s all folks?! (and this time I mean it)

    Read the article

  • LibGDX onTouch() method Array and flip method

    - by johnny-b
    How can I add this on my application. i want to use the onTouch() method from the implementation of the InputProcessor to kill the enemies on screen. how do i do that? do i have to do anything to the enemy class? also i am trying to add a Array of enemies and it keeps throwing exceptions or the bullet now is facing LEFT <--- again after I used the flip method in the bullet class. All the code is below so please anyone feel free to have a look thanks. please help Thank you M // This is the bullet class. public class Bullet extends Sprite { public static final float BULLET_HOMING = 6000; public static final float BULLET_SPEED = 300; private Vector2 velocity; private float lifetime; private Rectangle bul; public Bullet(float x, float y) { velocity = new Vector2(0, 0); setPosition(x, y); AssetLoader.bullet1.flip(true, false); AssetLoader.bullet2.flip(true, false); setSize(AssetLoader.bullet1.getWidth(), AssetLoader.bullet1.getHeight()); bul = new Rectangle(); } public void update(float delta) { float targetX = GameWorld.getBall().getX(); float targetY = GameWorld.getBall().getY(); float dx = targetX - getX(); float dy = targetY - getY(); float distToTarget = (float) Math.sqrt(dx * dx + dy * dy); dx /= distToTarget; dy /= distToTarget; dx *= BULLET_HOMING; dy *= BULLET_HOMING; velocity.x += dx * delta; velocity.y += dy * delta; float vMag = (float) Math.sqrt(velocity.x * velocity.x + velocity.y * velocity.y); velocity.x /= vMag; velocity.y /= vMag; velocity.x *= BULLET_SPEED; velocity.y *= BULLET_SPEED; bul.set(getX(), getY(), getOriginX(), getOriginY()); Vector2 v = velocity.cpy().scl(delta); setPosition(getX() + v.x, getY() + v.y); setOriginCenter(); setRotation(velocity.angle()); } public Rectangle getBounds() { return bul; } public Rectangle getBounds1() { return this.getBoundingRectangle(); } } // This is the class where i load all the images from public class AssetLoader { public static Texture texture; public static TextureRegion bg, ball1, ball2; public static Animation bulletAnimation, ballAnimation; public static Sprite bullet1, bullet2; public static void load() { texture = new Texture(Gdx.files.internal("SpriteN1.png")); texture.setFilter(TextureFilter.Nearest, TextureFilter.Nearest); bg = new TextureRegion(texture, 80, 421, 395, 30); bg.flip(false, true); ball1 = new TextureRegion(texture, 0, 321, 32, 32); ball1.flip(false, true); ball2 = new TextureRegion(texture, 32, 321, 32, 32); ball2.flip(false, true); bullet1 = new Sprite(texture, 380, 350, 45, 20); bullet1.flip(false, true); bullet2 = new Sprite(texture, 425, 350, 45, 20); bullet2.flip(false, true); TextureRegion[] balls = { ball1, ball2 }; ballAnimation = new Animation(0.16f, balls); ballAnimation.setPlayMode(Animation.PlayMode.LOOP); } Sprite[] bullets = { bullet1, bullet2 }; bulletAnimation = new Animation(0.06f, aims); bulletAnimation.setPlayMode(Animation.PlayMode.LOOP); } public static void dispose() { texture.dispose(); } // This is for the rendering or drawing onto the screen/canvas. public class GameRenderer { private Bullet bullet; private Ball ball; public GameRenderer(GameWorld world) { myWorld = world; cam = new OrthographicCamera(); cam.setToOrtho(true, 480, 320); batcher = new SpriteBatch(); // Attach batcher to camera batcher.setProjectionMatrix(cam.combined); shapeRenderer = new ShapeRenderer(); shapeRenderer.setProjectionMatrix(cam.combined); // Call helper methods to initialize instance variables initGameObjects(); initAssets(); } private void initGameObjects() { ball = GameWorld.getBall(); bullet = myWorld.getBullet(); scroller = myWorld.getScroller(); } private void initAssets() { ballAnimation = AssetLoader.ballAnimation; bulletAnimation = AssetLoader.bulletAnimation; } public void render(float runTime) { Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL30.GL_COLOR_BUFFER_BIT); batcher.begin(); batcher.disableBlending(); batcher.enableBlending(); batcher.draw(AssetLoader.ballAnimation.getKeyFrame(runTime), ball.getX(), ball.getY(), ball.getWidth(), ball.getHeight()); batcher.draw(AssetLoader.bulletAnimation.getKeyFrame(runTime), bullet.getX(), bullet.getY(), bullet.getOriginX(), bullet.getOriginY(), bullet.getWidth(), bullet.getHeight(), 1.0f, 1.0f, bullet.getRotation()); // End SpriteBatch batcher.end(); } } // this is to load the image etc on the screen i guess public class GameWorld { public static Ball ball; private Bullet bullet; private ScrollHandler scroller; public GameWorld() { ball = new Ball(480, 273, 32, 32); bullet = new Bullet(10, 10); scroller = new ScrollHandler(0); } public void update(float delta) { ball.update(delta); bullet.update(delta); scroller.update(delta); } public static Ball getBall() { return ball; } public ScrollHandler getScroller() { return scroller; } public Bullet getBullet() { return bullet; } } //This is the input handler class public class InputHandler implements InputProcessor { private Ball myBall; private Bullet bullet; private GameRenderer aims; // Ask for a reference to the Soldier when InputHandler is created. public InputHandler(Ball ball) { myBall = ball; } @Override public boolean touchDown(int screenX, int screenY, int pointer, int button) { return false; } @Override public boolean keyDown(int keycode) { return false; } @Override public boolean keyUp(int keycode) { return false; } @Override public boolean keyTyped(char character) { return false; } @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { return false; } @Override public boolean touchDragged(int screenX, int screenY, int pointer) { return false; } @Override public boolean mouseMoved(int screenX, int screenY) { return false; } @Override public boolean scrolled(int amount) { return false; } } i am rendering all graphics in a GameRender class and a gameworld class if you need more info please let me know I am trying to make the array work but keep finding that when an array is initialized then the bullet fips back to the original and ends up being backwards???? and if I create an array I keep getting Exceptions throw??? Thank you for any help given.

    Read the article

  • 2 javascripts problem

    - by pradeep
    <?php global $user; $userId = $user->uid; /* start with default */ $myresult = ""; /* All Includes - start */ include_once('db.php'); include_once('valid-scripts/validateData.php'); /* All Includes - end */ /* Build All required Variables - start */ $alias = $_GET['alias']; $product = $_GET['product']; $product = strtolower(substr($product,0,-1)); $master_table = $product.'_master'; $rating_master_table = $product.'_rating_master'; $rating_table = $product.'_rating'; $numProperties = 15; /* Build All required Variables - end */ /* Add all Styles required - start */ $myresult .= '<link href="/jquery.rating.css" type="text/css" rel="stylesheet"/>'; /* Add all Styles required - end */ /* Show Hide Variables/parameters - start */ include_once('all_include_files/show_hide.php'); /* Show Hide Variables/parameters - end */ /* All Javascript - start */ //$myresult .= '<script src="/jquery.rating.js" type="text/javascript" language="javascript"></script>'; ?> <style> #tabs { //font-size: 90%; //margin: 20px 0; margin: 2px 0; } #tabs ul { float: right; background: #E3FEFA; width: 600px; //padding-top: 4px; } #tabs li { margin-left: 8px; list-style: none; } * html #tabs li { display: inline; /* ie6 double float margin bug */ } #tabs li, #tabs li a { float: left; } #tabs ul li a { text-decoration: none; //padding: 8px; color: #0073BF; font-weight: bold; } #tabs ul li.active { background: #CEE1EF url(/all_include_files/img/nav-right.gif) no-repeat right top; } #tabs ul li.active a { background: url(/all_include_files/img/nav-left.gif) no-repeat left top; color: #333333; } #tabs div { //background: #CEE1EF; clear: both; //padding: 20px; min-height: 200px; } #tabs div h3 { text-transform: uppercase; margin-bottom: 10px; letter-spacing: 1px; #tabs div p { line-height: 150%; } </style> <script src="/jquery.rating.js" type="text/javascript" language="javascript"></script> <script src="/jquery.metadata.js" type="text/javascript" language="javascript"></script> <script type='text/javascript'> function openComment(number) { alert('working'); $('#comment'+number).css('display',''); } $('.star').rating({ callback: function(value, link){ alert(value); } }); $(document).ready(function() { //$('#tabs div').hide(); //$('#tabs div:first').show(); $('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function() { $('#tabs ul li').removeClass('active'); $(this).parent().addClass('active'); var currentTab = $(this).attr('href'); $('#tabs div').hide(); $(currentTab).show(); return false; }); $("#clickit").click(function() { $.post("/mobile/tablechange.php",{ p1:'<?php echo $brand ?>',p2:'<?php echo $model ?>',userid:'<?php echo $userid ?>' } ,function(data){ $("#changetable").html(data); }); }); $('div.expandable p').expander({ slicePoint: 200, // default is 100 expandText: 'more &raquo;', // default is 'read more...' collapseTimer: 0, // re-collapses after 5 seconds; default is 0, so no re-collapsing userCollapseText: '[^]' // default is '[collapse expanded text]' }); }); </script> <?php /* All Javascript - end */ /* Form Processing after submit - start */ /* Form Processing after submit - end */ /* Actual Form or Page - start */ /*fetch all data needed */ /* initial query */ $result_product = query_product_table($product,$alias); /*fetch property names of product */ $product_properties = master_table($master_table); /*rating table query */ $master_rating_properties = master_rating_table($rating_master_table); /*get user ratings*/ $user_ratings = user_ratings($userId,$alias,$rating_table); $myresult .= '<div class=\'Services\'>'; //$myresult .="<form name ='form1' id='form1' method = 'POST' action='".$_SERVER['php_self'] ."'>"; if(!$result_product) { header('Location: /page-not-found'); } else { $row_product = mysql_fetch_array($result_product); $myresult .= "<h3 class='newstyle'>".$row_product['alias']." <a style='float:right;padding-right:20px;color:white;text-decoration:underline;' href='/'>Back</a> </h3>"; /* start actual product display - start*/ $myresult .= "<div class=\"product\">"; /* start table 1*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\'>'; $myresult .= '<tr>'; $myresult .='<td valign=\'top\'>'; /* start table 2*/ $myresult .='<table width=\'100%\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\'>'; $myresult .= '<tr>'; $myresult .= '<td valign=\'top\' style=\'width:164px;\'>'; /* start table 3*/ $myresult .= '<table style=\'width:164px;\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\'>'; $myresult .= "<tr>"; /* start of the pic row */ $myresult .= '<td align=\'center\' class=\'various_product\'>'; if($row_product['pic'] != "") { $myresult .= '<ul id=\'mycarousel\' style=\'display:\';>'; $myresult .= '<li><a href=\'/all_image_scripts/origpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic&p= \'rel=\'lightbox[roadtrip]\'><img src=\'/all_image_scripts/picdisplay1.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'\'></img></a></li>'; for($p = 1; $p <= 4; $p++) { if($row_product['pic'.$p] != "") { $myresult .= '<li><a href=\'/all_image_scripts/origpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic'.rawurlencode($p).'&p='.rawurlencode($p).'\' rel=\'lightbox[roadtrip]\'><img src=\'/all_image_scripts/thumbpicdisplay.php?product='.rawurlencode($product).'&alias='.rawurlencode($alias).'&picid=pic'.rawurlencode($p).'\'></img></a></li>'; } } $myresult .= '</ul>'; } else { $myresult .= "<img width='50' height='70' src='/images/no-image.gif'></img>"; } jcarousel_add('#mycarousel', array('horizontal' => TRUE,'scroll' => 1,'visible' => 1)); $myresult .= "</td>"; /* end display of pic td*/ $myresult .= "</tr>"; /* end display of pic tr*/ $myresult .= "</table></td>"; /* end display of pic table and earlier td - Still 1 open TR td table tr -hint*/ $myresult .= '<td style=\'width:450px;\'>'; /*table - 4*/ $myresult .= '<table width=\'100%\' border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'display:block;\'>'; /* Start showing property and values */ $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.ucfirst($product).':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['alias'] .'</td>'; $myresult .= "</tr>"; for($j = 3; $j <= 5 ; $j++){ if($product_properties['property'.$j.'_name'] != "") { if($row_product['property'.$j] != "") { $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.$product_properties['property'.$j.'_name'].':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['property'.$j] .'</td>'; $myresult .= '</tr>'; } /* end if*/ } /* end if*/ } /* end for*/ /* show hide block */ $myresult .= '<tbody id=\'extra_properties\' style=\'display: none;\'>'; for($j = 6; $j <= 15 ; $j++){ if($product_properties['property'.$j.'_name'] != "") { if($row_product['property'.$j] != "") { $myresult .= '<tr>'; $myresult .= '<td class=\'tick\'><img src=\'/images/ul_li_bg.gif\' width=\'12\' height=\'12\' /></td>'; $myresult .= '<td class=\'leftText\'>'.$produtc_properties['property'.$j.'_name'].':</td>'; $myresult .= '<td class=\'rightText\'>'.$row_product['property'.$j] .'</td>'; $myresult .= '</tr>'; } /* end if*/ } /* end if*/ } /* end for */ $myresult .= '</tbody>'; /* end show/hide tbody */ $myresult .= '<tr>'; $myresult .= '<td>'; $myresult .= '&nbsp;'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '&nbsp;'; $myresult .= '</td>'; $myresult .= '<td align=\'right\' style=\'text-align:right;text-decoration:underline;\'>'; $myresult .= '<a class=\'right_link\' href=\'javascript:showMore()\'>Show Additional Details...</a>'; $myresult .= '</td>'; $myresult .= '</tr>'; /* End showing property and values */ $showreview = 'display:'; /* review show hide */ /*$myresult .= '<tbody '.$showreview.'>'; $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'><span class=\'reviews\'>'; //check //$numreviews = getreviewcount($brand,$model,'mobile_user_reviews'); if($numreviews > 0) { $myresult .= '<a href=\'mobilereviews?alias='.rawurlencode($alias).'\'> <span>$numreviews Reviews</span></a>'; } else { $myresult .= " $numreviews Reviews"; } $myresult .= "</span></td>"; $myresult .= "</tr>"; */ $myresult .= "</tbody>"; /* review show hide - end */ /* count show hide */ $myresult .= '<tbody '.$showcount.'>'; $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'><span class=\'reviews\'>'; //check //$totalvotes = gettotalvotes($row['property1'],$row['property2'],'mobile_rating'); $myresult .= "</td>"; $myresult .= "</tr>"; $myresult .= "</tbody>"; /* count show hide - end */ $myresult .= "</table></td>"; /* end table 4 */ $myresult .= '</tr>'; /* end 1 row and remaining tr , td ,table */ $myresult .= '</table></td>'; $myresult .= '</tr>'; /* remianing only 1 table */ /* ratings - positive last section starts here */ $max= array(); for ($l = 1 ; $l < 15; $l++){ if($row_product['property'.$l.'_avg']){ $maxarray = 0; $maxarray = $row_product['property'.$l.'_avg']; $max['rating'.$l.'_name'] = $maxarray; } } if(count($max) >0 ) { include('all_include_files/min_max_properties.php'); } if(($row_product['freshness'] <= strtotime("-3 month"))) { $image_type= 'old'; } else if(($row_product['freshness'] <= strtotime("-2 month"))) { $image_type= 'bitold'; } else if(($row_product['freshness'] <= strtotime("-1 month")) || ($row_product['freshness'] > strtotime("-1 month"))) { $image_type= 'new'; } $img_name = $image_type; $myresult .= "<tr>"; $myresult .= "<td>"; $myresult .= "<table width='100%' border='0'>"; $myresult .= "<tr>"; $myresult .= "<td width='170' class=\"ratingz\"><span><u>Overall rating</u></span></td>"; $myresult .= "<td width='150' class=\"ratingz\"><span><u>Positive</u></span></td>"; $myresult .= "<td width='150' class=\"ratingz\"><span><u>Negative</u></span></td>"; if($img_name == 'new'){ $images = "<img src='/sites/default/files/battery-discharging-100.png' width='40' height='40'></img>"; } else if($img_name == 'bitold'){ $images = "<img src='/sites/default/files/battery-discharging-80.png' width='40' height='40'></img>"; } else if($img_name == 'old'){ $images = "<img src='/sites/default/files/battery-discharging-0.png' width='40' height='40'></img>"; } else { $images = ""; } $myresult .= "<td rowspan='2'><p ".$showbattery.">". $images ."</p></td>"; $myresult .= "</tr>"; $myresult .= "<tr>"; $myresult .= "<td>"; $i++; for($k = 0.5; $k <= 10.0; $k+=0.5) { $overall = roundOff($row_product['overall_rating']); if($overall == $k) { $chk ="checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' disabled />'; } $myresult .= '</td>'; $myresult .= '<td ><span>'.$positive.'</span></td>'; $myresult .= '<td ><span>'.$negative.'</span></td>'; $myresult .= '</tr>'; $myresult .= '</table></td>'; $myresult .= '</tr>'; /* ratings - positive last section ends here */ $myresult .= '<tr>'; if($row_product['description'] != ""){ if(words_count($row_product['description']) > 8){ $myresult .= '<td><p><span class=\'description\'><strong><u>Description</u>:</strong></span>&nbsp;&nbsp; <div class=\'expandable\'><p>'.$row_product['description'].'</div></p></p></td>'; } else { $myresult .= '<td><p><span class=\'description\'><strong><u>Description</u>:</strong></span>&nbsp;&nbsp;'. $row_product['description'] .'</p></td>'; } } $myresult .= '</tr>'; $myresult .= '</table>'; /* end 1st table */ $myresult .= '</div>'; /* start actual product display - end*/ /*start the form to take ratings */ $myresult .= '<div id=\'tabs\'>'; $myresult .= '<ul>'; $myresult .= '<li><a href=\'#tab-1\'>Ratings</a></li>'; $myresult .= '<li><a href=\'#tab-2\'>Click here to rate</a></li>'; $myresult .= '</ul>'; $myresult .= '<div id=\'tab-1\'>'; /* actual rating table - start - jsut display ratings */ $myresult .= '<table id=\'rounded-corner\'>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'30%\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Ratings</span></th>'; $myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'><a href=\'#rounded-corner\' id=\'clickit\' style=\'color:white;text-decoration:underline;\' $disabled ></a></th> '; /*$myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'><a href=\'#rounded-corner\' id=\'clickit\' style=\'color:white;text-decoration:underline;\' $disabled >Click here to rate</a></th> ';*/ $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ /* tbody - start */ $myresult .= '<tbody>'; /*start printing the table wth feature and ratings */ for ($i = 1 ; $i < $numProperties; $i++){ if($master_rating_properties['rating'.$i.'_name']){ $myresult .= '<tr>'; $myresult .= '<td width=\'22%\'>'; $indfeature = 0; $indfeature = $row_product['property'.$i.'_avg']; $myresult .= $master_rating_properties['rating'.$i.'_name'].' ( '.$indfeature .')'; $myresult .= '</td>'; $myresult .= '<td colspan=\'0\' width=\'38%\' >'; $tocheck = $indfeature; for($k = 0.5; $k <= 10.0; $k+=0.5){ $tocheck = roundOff($tocheck); if(($tocheck) == $k) { $chk = "checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' name=\'drating'.$i.'\' id=\'drating'.$i.''.$k.'\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' disabled \'/>'; } /* for k loop end */ $myresult .= '</tr>'; } /* end if loop */ } /* end i for loop */ $myresult .= '</tbody>'; /* end tbody */ /* footer round corner start */ $myresult .= '<tfoot>'; $myresult .= '<tr>'; $myresult .= '<td class=\'rounded-foot-left\'>&nbsp;</td>'; $myresult .= '<td class=\'rounded-foot-right\' colspan=\'4\' >'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '</tfoot>'; $myresult .= '</table>'; /*round corner table end */ $myresult .= '</div>'; /*end 1st tab */ /*start 2nd tab */ $myresult .= '<div id=\'tab-2\'>'; $myresult .= '<form name =\'form1\' id=\'form1\' method = \'POST\' action=\''.$_SERVER['php_self'] .'\'>'; /* actual rating table - start - actual rate/update */ $myresult .= '<table id=\'rounded-corner\'>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'30%\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Ratings</span></th>'; $myresult .= '<th width=\'70%\' colspan=\'2\'class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ /* tbody - start */ $myresult .= '<tbody>'; unset($i); /*start printing the table wth feature and ratings */ for ($i = 1 ; $i < $numProperties; $i++){ if($master_rating_properties['rating'.$i.'_name']){ $myresult .= '<tr>'; /*fetch ratings and comments - 1st make it to null */ $indfeature = 0; $comment = ''; $indfeature = $user_ratings['rating'.$i]; if($indfeature == NULL){ $indfeature = 0; } $comment = $user_ratings['rating'.$i.'_comment']; $myresult .= '<td width=\'22%\'>'; $myresult .= $master_rating_properties['rating'.$i.'_name'].' ( '.$indfeature.' )'; $myresult .= '</td>'; $myresult .= '<td colspan=\'0\' width=\'38%\' >'; if(($userId != '0') && (is_array($user_ratings))) { $tocheck = $indfeature; } else { $tocheck = '0'; } for($k = 0.5; $k <= 10.0; $k+=0.5){ $tocheck = roundOff($tocheck); if(($tocheck) == $k) { $chk = "checked"; } else { $chk = ""; } $myresult .= '<input class=\'star {split:2}\' type=\'radio\' name=\'rating'.$i.'\' id=\'rating'.$i.''.$k.'\' value=\''. $k .'\' '.$chk.' title=\''. $k.' out of 10 \' '.$disabled.' \' />'; } /* for k loop end */ $myresult .= '</td>'; $myresult .= '<td width=\'40%\'>'; $myresult .= '<input title=\'Reason for this Rating.. \'type=\'text\' size=\'25\' name=\'comment'.$i.'\' id=\'comment'.$i.'\' style=\'display:;\' maxlength=\'255\' value="'.$comment.'">'; $myresult .= '</td>'; $myresult .= '</tr>'; } /* end if loop */ } /* end i for loop */ $myresult .= '</tbody>'; /* end tbody */ /* footer round corner start */ $myresult .= '<tfoot>'; $myresult .= '<tr>'; $myresult .= '<td class=\'rounded-foot-left\'>&nbsp;</td>'; $myresult .= '<td class=\'rounded-foot-right\' colspan=\'4\' >'; if(($userId != '0') && (is_array($user_ratings))) { $myresult .= '<input type=\'button\' id=\'update_form\' value=\'Update\'>'; } else { $myresult .= '<input type=\'button\' id=\'save_form\' value=\'Save\'>'; } $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '</tfoot>'; $myresult .= '</table>'; /*round corner table end */ $myresult .= '</form>'; /*end the form to take ratings */ $myresult .= '</div>'; /*end 2nd tab */ $myresult .= '</div>'; /*end tabs div */ /* actual rating table - end */ /* 1st form ends here id- ratings_form */ } /* end of if loop result_product loop */ /* start table 3 - overall comment*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\' id=\'rounded-corner\'>'; $myresult .= '<tbody>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th width=\'100%\' colspan=\'2\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Overall Comments</span></th>'; $myresult .= '<th colspan=\'3\' class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ $myresult .= '<tr>'; $myresult .= '<td colspan=\'4\'>'; $myresult .= '<textarea title=\'OverAll Comment\' name=\'overall_comment\' cols=\'65\'></textarea>'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '<tbody>'; $myresult .= '</table>'; /* end table 3 - overall comment*/ /* start table 4 - summary*/ $myresult .= '<table border=\'0\' cellspacing=\'0\' cellpadding=\'0\' style=\'width:580px; table-layout:fixed;\' id=\'rounded-corner\'>'; $myresult .= '<tbody>'; /* thead - start */ $myresult .= '<thead>'; $myresult .= '<tr>'; $myresult .= '<th colspan=\'2\' class=\'rounded-company\' scope=\'col\'><span style=\'font: normal 18px Arial, Helvetica, sans-serif; color:#FFF;\'>Your Opinion</span></th>'; $myresult .= '<th colspan=\'2\'class=\'rounded-q4\' scope=\'col\'></th>'; $myresult .= '</tr>'; $myresult .= '</thead>'; /* thead - end */ $myresult .= '<tr>'; $myresult .= '<td colspan=\'2\'>'; $myresult .= 'Do you Agree with the Ratings'; $myresult .= '</td>'; $myresult .= '<td colspan=\'2\'>'; $myresult .= 'Was the Information Helpful'; $myresult .= '</td>'; $myresult .= '</tr>'; $myresult .= '<tr>'; $myresult .= '<form name=\'form2\' id=\'form2\' method=\'post\'>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'agree\' value=\'agree\'>'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'disagree\' value=\'disagree\'>'; $myresult .= '</td>'; $myresult .= '<input type=\'hidden\' name=\'agree_disagree\' id=\'agree_disagree\'>'; $myresult .= '</form>'; $myresult .= '<form name=\'form3\' id=\'form3\' method=\'post\'>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'helpful\' value=\'Helpful\'>'; $myresult .= '</td>'; $myresult .= '<td>'; $myresult .= '<input type=\'button\' class=\'nothelpful\' value=\'Not Helpful\'>'; $myresult .= '</td>'; $myresult .= '<input type=\'hidden\' name=\'help_nohelp\' id=\'help_nohelp\'>'; $myresult .= '</form>'; $myresult .= '</tr>'; $myresult .= '</tbody>'; $myresult .= '</table>'; /*end table 4 summary table */ $myresult .= '</div>'; /* Actual Form or Page - end */ echo $myresult; //echo 'Product: '.$product; //echo '<br/>Alias: '.$alias; ?> hey this code is working fine for me . as required. the star class code is taken from http://www.fyneworks.com/jquery/star-rating/ ... it works well.. but when i insert code to add tabs for content ,the starts is not visible at all. but when i check source code. the stars are actually there . dono whats the prob. any suggestions on this this is the tabs code $('#tabs div').hide(); ('#tabs div:first').show(); $('#tabs ul li:first').addClass('active'); $('#tabs ul li a').click(function() { $('#tabs ul li').removeClass('active'); $(this).parent().addClass('active'); var currentTab = $(this).attr('href'); $('#tabs div').hide(); $(currentTab).show(); return false; });

    Read the article

  • ERROR: Attempted to read or write protected memory. This is often an indication that other memory is corrupt

    - by SPSamL
    I get this error after having edited a few pages in SharePoint 2010. I have to do an IISReset on both front ends to get this to resolve. I don't know how to fix it or even what else to supply here, but please let me know as the resets now happen several times per day. Log Name: Application Source: ASP.NET 2.0.50727.0 Date: 1/26/2011 11:12:48 AM Event ID: 1309 Task Category: Web Event Level: Warning Keywords: Classic User: N/A Computer: PINTSPSFE02.samcstl.org Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 1/26/2011 11:12:48 AM Event time (UTC): 1/26/2011 5:12:48 PM Event ID: c52fb336b7f147a3913fff3617a99d57 Event sequence: 4965 Event occurrence: 2178 Event detail code: 0 Application information: Application domain: /LM/W3SVC/1449762715/ROOT-2-129405348166941887 Trust level: WSS_Minimal Application Virtual Path: / Application Path: C:\inetpub\wwwroot\wss\VirtualDirectories\80\ Machine name: PINTSPSFE02 Process information: Process ID: 5928 Process name: w3wp.exe Account name: SAMC\MossAppPool Exception information: Exception type: AccessViolationException Exception message: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Request information: Request URL: http://mosscluster/Pages/Home.aspx Request path: /Pages/Home.aspx User host address: 10.3.60.26 User: SAMC\BARNMD Is authenticated: True Authentication Type: NTLM Thread account name: SAMC\MossAppPool Thread information: Thread ID: 110 Thread account name: SAMC\MossAppPool Is impersonating: False Stack trace: at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Delete(String key, Boolean recursive, DeletionReason reason) at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Get(String key) at Microsoft.Office.Server.ObjectCache.SPCache.Get(String objectTypeName, String id) at Microsoft.Office.Server.Administration.UserProfileServiceProxy.GetPartitionPropertiesCache(Guid applicationID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionPropertiesCache() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.DataCache.get_PartitionProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, Guid partitionID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) Custom event details: Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="ASP.NET 2.0.50727.0" /> <EventID Qualifiers="32768">1309</EventID> <Level>3</Level> <Task>3</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2011-01-26T17:12:48.000000000Z" /> <EventRecordID>35834</EventRecordID> <Channel>Application</Channel> <Computer>PINTSPSFE02.samcstl.org</Computer> <Security /> </System> <EventData> <Data>3005</Data> <Data>An unhandled exception has occurred.</Data> <Data>1/26/2011 11:12:48 AM</Data> <Data>1/26/2011 5:12:48 PM</Data> <Data>c52fb336b7f147a3913fff3617a99d57</Data> <Data>4965</Data> <Data>2178</Data> <Data>0</Data> <Data>/LM/W3SVC/1449762715/ROOT-2-129405348166941887</Data> <Data>WSS_Minimal</Data> <Data>/</Data> <Data>C:\inetpub\wwwroot\wss\VirtualDirectories\80\</Data> <Data>PINTSPSFE02</Data> <Data> </Data> <Data>5928</Data> <Data>w3wp.exe</Data> <Data>SAMC\MossAppPool</Data> <Data>AccessViolationException</Data> <Data></Data> <Data>http://mosscluster/Pages/Home.aspx</Data> <Data>/Pages/Home.aspx</Data> <Data>10.3.60.26</Data> <Data>SAMC\BARNMD</Data> <Data>True</Data> <Data>NTLM</Data> <Data>SAMC\MossAppPool</Data> <Data>110</Data> <Data>SAMC\MossAppPool</Data> <Data>False</Data> <Data> at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Delete(String key, Boolean recursive, DeletionReason reason) at Microsoft.Office.Server.ObjectCache.SPCache.MossObjectCache_Tracked.Get(String key) at Microsoft.Office.Server.ObjectCache.SPCache.Get(String objectTypeName, String id) at Microsoft.Office.Server.Administration.UserProfileServiceProxy.GetPartitionPropertiesCache(Guid applicationID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionPropertiesCache() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.DataCache.get_PartitionProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, Guid partitionID) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.GetMySitePortalUrl(SPUrlZone zone, SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) </Data> </EventData> </Event>

    Read the article

  • Hyper-V File Server Clustering - at my wit’s end

    - by René Kåbis
    I am at my wit’s end with File Server clustering under Hyper-V. I am hoping that someone might be able to help me figure out this Gordian Knot of a technology that seems to have dead ends (like forcing cluster VMs to use iSCSI drives where normally-attached VHDX drives could suffice) where logic and reason would normally provide a logical solution. My hardware: I will be running three servers (in the end), but right now everything is taking place on one server. One of the secondary servers will exist purely as a witness/quorum, and another slightly more powerful one will be acting as an emergency backup (with additional storage, just not redundant) to hold the secondary AD VM and the other halves of a set of clustered VMs: the SQL VM and the file system VM. Please note, these each are the depreciated nodes of a cluster, the main nodes will be on the most powerful first machine. My heavy lifter is a machine that also contains all of the truly redundant storage on the network. If this gives anyone the heebie-geebies, too bad. It has a 6TB (usable) RAID-10 array, and will (in the end) hold the primary nodes of both aforementioned clusters, but is right now holding all VMs. This is, right now: DC01, DC02, SQL01, SQL02, FS01 & FS02. Eventually, I will be adding additional VMs to handle Exchange, Sharepoint and Lync, but only to this main server (the secondary server won't be able to handle more than three or four VMs, so why burden it? The AD, SQL & FS VMs are the most critical for the business). If anyone is now saying, “wait, what about a SAN or a NAS for the file servers?”, well too bad. What exists on the main machine is what I have to deal with. I followed these instructions, but I seem to be unable to get things to work. In order to make the file server truly redundant, I cannot trust any one machine to hold the only data store on the network. Therefore, I have created a set of iSCSI drives on the VM-host of the main machine, and attached one to each file server VM. The end result is that I want my FS01 to sit on the heavy lifter, along with its iSCSI “drive”, and FS02 will sit on the secondary machine with its own iSCSI “drive” there as well. That is, neither iSCSI drive will end up sitting on the same machine as the other. As such, the clustered FS will utterly duplicate the contents of the iSCSI drives between each other, so that if one physical machine (or the FS VM) goes toes-up, the other has got a full copy of the data on its own iSCSI drive. My problem occurs when I try to apply the file server role within the failover cluster manager. Actually, it is even before that -- it occurs when adding the disks. Since I have added each disk preferentially to a specific VM (by limiting the initiator by DNS hostname, and by adding two-way CHAP authentication), this forces each VM to be in control of its own iSCSI disk. However, when I try to add the disks to the Disks section of Storage within Failover Cluster Manager, the entire process fails for a random disk of the pair. That is, one will get online, but the other will remain offline because it does not have the correct “owner node”. I mean, really -- WTF? Of course it doesn’t have the right owner node, both drives are showing the same node name!! I cannot seem to have one drive show up with one node name as owner, and the other drive show up with the other node name as owner. And because both drives are not “online”, I cannot create a pool to apply to a cluster role. Talk about getting stuck between a rock and a hard place! I’ve got more to add, but my work is closing for the day and I have to wrap things up. I will try to add more tomorrow morning when I get in. My main objective is to have a file server VM on each machine, the storage on each machine, but a transparent failover in case one physical machine fails. Essentially, a failover FS that doesn’t care which machine fails -- the storage contents are replicated equally on each machine. Am I even heading in the right direction?

    Read the article

  • Open source CMS for a university department

    - by Greg Kuperberg
    I realize that this type of question gets asked over and over again. Nonetheless, I want to ask a more specific version. I'm in a university math department. Long ago our sysadmins (or just one at the time) switched to a web content management system. At the time, Zope looked like an informed choice. We have used Zope for years, but at least in my opinion, it has always been a controversial decision. At the time I didn't understand why it was so important to have a web CMS. Now I see that it certainly is important, but I don't know that it should be Zope. The good (even necessary) features of Zope for us are: It's free and Linux-based. It is a true CMS and not something else (e.g. wiki or blog) It lets you write HTML and scripts. What I really don't like about Zope is that the outcome of using it is all-or-nothing in a lot of ways. At least in convenient use, it ends up dividing the enterprise into superusers who can do everything, and lusers who can't do anything (except write their own home pages in plain HTML). It has a huge user manual, which end users won't have time to read. Somehow with the access permissions, the simple thing to do is to let a few admins access all of the source and data and that's it. Since this is a math department, the user base varies from real novices to people who understand computers reasonably well. But as it stands, any change that involves Zope has to go through the sysadmins. When the sysadmins are in a hurry, sometimes they will also just add plain HTML pages to the web site instead of using the Zope framework. It doesn't help matters that Zope is fairly disk-intensive and fairly hype-intensive. Not to dwell on Zope too much, but I am wondering what is the right web CMS for a mixed user base of terminal novices, quick studies, and experienced users. Some users might want intermediate permissions, e.g. read permission but not write permission, or permission to change some subset of the pages or see some subset of the database tables. Also it should be Linux-based and open source and a little bit scalable, and of course widely used and well-supported is a good idea. I might guess that the answer is Drupal just because that was the general answer before, but I don't know if it is the right type of CMS for this purpose. (But note that Python is a relatively popular language in a math department, among other reasons because Sage is based on Python.) I can see that I didn't completely define the question and that people are guessing what type of site it is. It is the UC Davis Math Department. The main structure of the site is not suitable for a wiki and it is also not the same thing as a course environment like Moodle. Rather, the site is mostly structured as a generic medium-small enterprise. Some components of the site could be a wiki, Moodle, LaTeX plugin, Request Tracker, etc. However, the main issue is not these components. The main issue is that it would be better to decentralize management of the site. Right now, everything that is in the Zope CMS has to go through the sysadmins. Every other user in the department either has to put in a request to them, or write their own web pages with no help from Zope. There are two main reasons for this: (1) Other people in the department don't have time to read the Zope manual. (2) It's a hassle to set up intermediate permissions in Zope. However, there are other people in the department who know how to write computer programs and use markup languages. I wouldn't want a solution that assumes that users either can't be trusted with much more than drag-and-drop, or that they are IT professionals who sleep with documentation manuals. I'm wondering if Plone/Zope still has this quality, since certainly Zope by itself does. But I also wonder sometimes if common-sense flexibility is unfashionable these days, and that things in general have be either mindlessly easy or incredibly powerful.

    Read the article

  • T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

    - by edelwater
    Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

    Read the article

  • How to configure multiple WCF binding configurations for the same scheme

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • Animating the offset of the scrollView in a UICollectionView/UITableView causes prematurely disappearing cells

    - by radutzan
    We have a UICollectionView with a custom layout very similar to UITableView (it scrolls vertically). The UICollectionView displays only 3 cells simultaneously, with one of them being the currently active cell: [ 1 ] [*2*] [ 3 ] (The active cell here is #2.) The cells are roughly 280 points high, so only the active cell is fully visible on the screen. The user doesn't directly scroll the view to navigate, instead, she swipes the active cell horizontally to advance to the next cell. We then do some fancy animations and scroll the UICollectionView so the next cell is in the "active" position, thus making it the active one, moving the old one away and bringing up the next cell in the queue: [ 2 ] [*3*] [ 4 ] The problem here is setting the UICollectionView's offset. We currently set it in a UIView animation block (self.collectionView.contentOffset = targetOffset;) along with three other animating properties, which mostly works great, but causes the first cell (the previously active one, in the latter case, #2) to vanish as soon as the animation starts running, even before the delay interval completes. This is definitely not ideal. I've thought of some solutions, but can't figure out the best one: Absurdly enlarge the UICollectionView's frame to fit five cells instead of three, thus forcing it to keep the cells in memory even if they are offscreen. I've tried this and it works, but it sounds like an awfully dirty hack. Take a snapshot of the rendered content of the vanishing cell, put it in a UIImageView, add the UIImageView as a subview of the scrollView just before the cell goes away in the exact same position of the old cell, removing it once the animation ends. Sounds less sucky than the previous option (memory-wise, at least), but still kinda hacky. I also don't know the best way to accomplish this, please point me in the right direction. Switch to UIScrollView's setContentOffset:animated:. We actually used to have this, and it fixed the disappearing cell issue, but running this in parallel with the other UIView animations apparently competes for the attention of the main thread, thus creating a terribly choppy animation on single-core devices (iPhone 3GS/4). It also doesn't allow us to change the duration or easing of the animation, so it feels out of sync with the rest. Still an option if we can find a way to make it work in harmony with the UIView block animations. Switch to UICollectionView's scrollToItemAtIndexPath:atScrollPosition:animated:. Haven't tried this, but it has a big downside: it only takes 3 possible constants (that apply to this case, at least) for the target scroll position: UICollectionViewScrollPositionTop, UICollectionViewScrollPositionCenteredVertically and UICollectionViewScrollPositionBottom. The active cell could vary its height, but it always has to be 35 points from the top of the window, and these options don't provide enough control to accomplish the design. It could also potentially be just as problematic as 3.1. Still an option because there might be a way to go around the scroll position thing that I don't know of, and it might not have the same issue with the main thread, which seems unlikely. Any help will be greatly appreciated. Please ask if you need clarification. Thanks a lot!

    Read the article

  • Silverlight: Scrolling with a StackPanel

    - by programatique
    I have a grid, 3 by 3 (3 rowdefinitions and 3 columndefinitions). I want some content (a StackPanel) in one of those grid cells to scroll. I'm fairly sure this is possible but I cannot figure out how. I've tried adding ScrollViewers and Scrollbar controls to the grid cell I want to scroll, but this usually ends up creating scrolling for the entire page. Edit: My issue is more specificlly how I can get scrolling over a StackPanel. An example if the issue I am having is here: <Grid x:Name="LayoutRoot"> <Grid.ColumnDefinitions> <ColumnDefinition/> <ColumnDefinition/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition/> <RowDefinition/> </Grid.RowDefinitions> <Grid> <TextBlock FontSize="16">1,1</TextBlock> </Grid> <Grid Grid.Column="1"> <TextBlock FontSize="16">1,2</TextBlock> </Grid> <Grid Grid.Row="1"> <TextBlock FontSize="16">2,1</TextBlock> </Grid> <Grid Grid.Column="1" Grid.Row="1"> <StackPanel> <TextBlock>Title</TextBlock> <Grid> <ScrollViewer> <StackPanel> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> <TextBlock FontSize="32">2,2</TextBlock> </StackPanel> </ScrollViewer> </Grid> </StackPanel> </Grid> </Grid>

    Read the article

  • Configuring multiple WCF binding configurations for the same scheme doesn't work

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" bindingConfiguration="public" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" bindingConfiguration="public" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • How to configurie multiple distinct WCF binding configurations for the same scheme

    - by Sandor Drieënhuizen
    I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

    Read the article

  • Android-Java: Constructing a triangle based on Coordinates on a map and your bearing

    - by Aidan
    Hi Guys, I'm constructing a geolocation based application and I'm trying to figure out a way to make my application realise when a user is facing the direction of the given location (a particular long / lat co-ord). I've got the math figured, I just have the triangle to construct. //UPDATE So I've figured out a good bit of this... Below is a method which takes in a long / lat value and attempts to compute a triangle finding a point 700 meters away and one to its left + right. It'd then use these to construct the triangle. It computes the correct longitude but the latitude ends up somewhere off the coast of east Africa. (I'm in Ireland!). public void drawtri(double currlng,double currlat, double bearing){ bearing = (bearing < 0 ? -bearing : bearing); System.out.println("RUNNING THE DRAW TRIANGLE METHOD!!!!!"); System.out.println("CURRENT LNG" + currlng); System.out.println("CURRENT LAT" + currlat); System.out.println("CURRENT BEARING" + bearing); //Find point X(x,y) double distance = 0.7; //700 meters. double R = 6371.0; //The radius of the earth. //Finding X's y value. Math.toRadians(currlng); Math.toRadians(currlat); Math.toRadians(bearing); distance = distance/R; Global.Alat = Math.asin(Math.sin(currlat)*Math.cos(distance)+ Math.cos(currlat)*Math.sin(distance)*Math.cos(bearing)); System.out.println("CURRENT ALAT!!: " + Global.Alat); //Finding X's x value. Global.Alng = currlng + Math.atan2(Math.sin(bearing)*Math.sin(distance) *Math.cos(currlat), Math.cos(distance)-Math.sin(currlat)*Math.sin(Global.Alat)); Math.toDegrees(Global.Alat); Math.toDegrees(Global.Alng); //Co-ord of Point B(x,y) // Note: Lng = X axis, Lat = Y axis. Global.Blat = Global.Alat+ 00.007931; Global.Blng = Global.Alng; //Co-ord of Point C(x,y) Global.Clat = Global.Alat - 00.007931; Global.Clng = Global.Alng; } From debugging I've determined the problem lies with the computation of the latitude done here.. Global.Alat = Math.asin(Math.sin(currlat)*Math.cos(distance)+ Math.cos(currlat)*Math.sin(distance)*Math.cos(bearing)); I have no idea why though and don't know how to fix it. I got the formula from this site.. http://www.movable-type.co.uk/scripts/latlong.html It appears correct and I've tested multiple things... I've tried converting to Radians then post computations back to degrees, etc. etc. Anyone got any ideas how to fix this method so that it will map the triangle ONLY 700 meters in from my current location in the direction that I am facing? Thanks, EDIT/// Converting the outcome to radians gives me a lat of 5.6xxxxxxxxxxxxxx .I have a feeling this bug has something to do with conversions but its not THAT simple. The equation is correct, it just.. outputs wrong..

    Read the article

  • NLP with greatly contrained input and abilities

    - by Mike F
    Hat in hand here. I'm a seasoned developer and I would be grateful for a bit of help. I don't have time to read or digest long intricate discussions on theoretical concepts around NLP (or go get my PHD). That said, I have read a few and it's a damn interesting field. The problem is I need real world solutions, for real world products, in real world time frames. The problem I'm having is right now I'm not sure what the right questions are to ask to get started implementing. I believe this is mostly related to vocabulary. I'll read somewhere, a blog post, a forum post, a whitepaper, and it says, I'm doing flooping with the blargy blarg method, and I go google flooping and blargy blarg, and I get references to more obscurity. It seemingly never ends. So, my question is multiphased. First, more generally, how do I become passingly educated on this quickly? Just in time educated. I only need to know what I need to know to take the next step. I've spent 20 years writing code. Explain quick. I'll get it. (I mean provide a reference to something that explains quickly of course). I'm happy to read the right book, but I don't want to read a book where I read the chapter introduction that explains what floopy floop is and then skip over the rest of the chapter with examples of floopy flooping (because now I get what it is). I also don't want to read a book that goes into too much detail with theoretical underpinnings or history. For example, the Jurafsky book seems like way more than I need: http://www.amazon.com/gp/product/0131873210. But I will read it if this is the right book to read. (It's also dang expensive!) I need the root node of the expedited learning tree here, if you will. Point me in the right direction and I'll be quite grateful. I'm expecting quite a lot of firehose drinking - I just need the right firehose. Second, what I need to do is take a single sentence, with a very reduced vocabulary, and get a grammar tree (sorry if this is the wrong terminology) that I can do something with. I know I could easily write this command line input style in c in a more conventional manner, but I need it to be way better than that. But I don't need a chatterbot either. What I'm doing needs to live in a constrained environment. I can't use Python (unfortunately). I can't ship with gigabytes of corpuses. I need any libraries I use to be in c/c++. If I have to write this myself, I will. Hopefully, it will be achievable considering the reduced problem set. Maybe, probably, that's just naive. If so, let me know. :-) Thanks in advance - Mike

    Read the article

  • Android 1.5 - 2.1 Search Activity affects Parent Lifecycle

    - by pacoder
    Behavior seems consistent in Android 1.5 to 2.1 Short version is this, it appears that when my (android search facility) search activity is fired from the android QSR due to either a suggestion or search, UNLESS my search activity in turn fires off a VISIBLE activity that is not the parent of the search, the search parents life cycle changes. It will NOT fire onDestroy until I launch a visible activity from it. If I do, onDestroy will fire fine. I need a way to get around this behavior... The long version: We have implemented a SearchSuggestion provider and a Search activity in our application. The one thing about it that is very odd is that if the SearchManager passes control to our custom Search activity, AND that activity does not create a visible Activity the Activity which parented the search does not destroy (onDestroy doesn't run) and it will not until we call a visible Activity from the parent activity. As long as our Search Activity fires off another Activity that gets focus the parent activity will fire onDestroy when I back out of it. The trick is that Activity must have a visual component. I tried to fake it out with a 'pass through' Activity so that my Search Activity could fire off another Intent and bail out but that didn't work either. I have tried setting our SearchActivity to launch singleTop and I also tried setting its noHistory attribute to true, tried setResult(RESULT_OK) in SearchACtivity prior to finish, bunch of other things, nothing is working. This is the chunk of code in our Search Activity onCreate. Couple of notes about it: If Intent is Action_Search (user typed in their own search and didn't pick a suggestion), we display a list of results as our Search Activity is a ListActivity. In this case when the item is picked, the Search Activity closes and our parent Activity does fire onDestroy() when we back out. If Intent is Action_View (user picked a suggestion) when type is "action" we fire off an Intent that creates a new visible Activity. In this case same thing, when we leave that new activity and return to the parent activity, the back key does cause the parent activity to fire onDestroy when leaving. If Intent is Action_View (user picked a suggestion) when type is "pitem" is where the problem lies. It works fine (the method call focuses an item on the parent activity), but when the back button is hit on the parent activity onDestroy is NOT called. IF after this executes I pick an option in the parent activity that fires off another activity and return to the parent then back out it will fire onDestroy() in the parent activity. Note that the "action" intent ends up running the exact same method call as "pitem", it just bring up a new visual Activity first. Also I can take out the method call from "pitem" and just finish() and the behavior is the same, the parent activity doesn't fire onDestroy() when backed out of. if (Intent.ACTION_SEARCH.equals(queryAction)) { this.setContentView(_layoutId); String searchKeywords = queryIntent.getStringExtra(SearchManager.QUERY); init(searchKeywords); } else if(Intent.ACTION_VIEW.equals(queryAction)){ Bundle bundle = queryIntent.getExtras(); String key = queryIntent.getDataString(); String userQuery = bundle.getString(SearchManager.USER_QUERY); String[] keyValues = key.split("-"); if(keyValues.length == 2) { String type = keyValues[0]; String value = keyValues[1]; if(type.equals("action")) { Intent intent = new Intent(this, EventInfoActivity.class); Long longKey = Long.parseLong(value); intent.putExtra("vo_id", longKey); startActivity(intent); finish(); } else if(type.equals("pitem")) { Integer id = Integer.parseInt(value); _application._servicesManager._mapHandlerSelector.selectInfoItem(id); finish(); } } } It just seems like something is being held onto and I can't figure out what it is, in all cases the Search Activity fires onDestroy() when finish() is called so it is definitely going away. If anyone has any suggestions I'd be most appreciative. Thanks, Sean Overby

    Read the article

  • Delphi - threads and FindFirst function

    - by radu-barbu
    Hi, I'm encountering a big problem when i'm trying to make a recursive search function inside a thread (using delphi 7) bellow is the code: TParcFicDir = class(TThread) private several variables.. protected procedure Execute; override; public constructor Create(CreateSuspended: Boolean); constructor TParcFicDir.Create(CreateSuspended: Boolean); begin inherited Create(CreateSuspended); end; procedure TParcFicDir.Execute; begin try FindFiles(FStartDir,FMask);//'c:\' and '*.*' except on e:Exception do end; end; procedure TParcFicDir.FindFiles(StartDir, FileMask: string); var wTmp : string; f:TextFile; wTempSR:TSearchRec; function Search(StartDir, FileMask: string): string; var SR : TSearchRec; IsFound : Boolean; files : integer; dirs : integer; t : string; begin try files := 0; dirs := 0; if StartDir[length(StartDir)] <> '\' then StartDir := StartDir + '\'; try IsFound := (FindFirst(StartDir + '*.*', faAnyFile, SR) = 0);// here the thread gets interrupted except on e: Exception do end; while IsFound do begin if (SR.Name <> '.') and (SR.Name <> '..') then if ((SR.Attr and faDirectory) <> 0) then if FScanDirs then begin inc(dirs); t := Search(StartDir + SR.Name, FileMask); try files := files + strtoint(copy((t), 0, pos('#', t) - 1));//old code, don't take on calcul; Delete(t, 1, pos('#', t)); dirs := dirs + strtoint(t); except on e: Exception do end; begin t := StartDir + SR.Name; wTmp := t; wtmp := ''; Inc(FDirNo); writeln(f,t); inc(filno); end; end else if ScanFiles then begin inc(filno); inc(files); end; IsFound := FindNext(SR) = 0; end; Result := IntToStr(files) + '#' + IntToStr(dirs); sysutils.FindClose(SR); except on e: Exception do end; end; begin filno := 0; try try if trim(FPathFileTmp)<>'' then AssignFile(f, FPathFileTmp+'Temp.bak') else AssignFile(f,ExtractFileDir(GetDllName)+'\Temp.bak'); Rewrite(f); Search(StartDir, FileMask); if StartDir[length(StartDir)] = '\' then delete(StartDir, length(StartDir), 1); wTmp := StartDir; wTmp := ''; if FindFirst(StartDir, faDirectory, wTempSR) = 0 then writeln(f); writeln(f); CloseFile(f); except on e: Exception do end; finally end; end; ok, probably the code is a little messed up, but i don't understand why the thread ends at 'findfirst' part....i googled it, no results. any help will be appreciated! Thanks in advance

    Read the article

  • FBML is not rendered in Facebook App in iframe - please help

    - by Jakob
    I'm developing an Facebook Application in PHP. It's loaded as an iframe and not as FBML. The normal interaction with Facebook works. For example the following code gives the username: $facebook = new Facebook($config->appapikey, $config->appsecret); $user_id = $facebook->require_login($required_permissions = 'email'); echo $user->name; Where $user is my class in which the user-details are loaded from facebook. My document begins the following way: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:fb="http://www.facebook.com/2008/fbml"> <head><title>Appname</title> </head> <body> <script src="http://static.ak.connect.facebook.com/js/api_lib/v0.4/FeatureLoader.js.php/de_DE" type="text/javascript"></script> And ends likes this: <script type="text/javascript"> FB_RequireFeatures(['XFBML','CanvasUtil'], function(){ FB.init("<?php echo $config->appapikey; ?>", "/app/xd_receiver.htm"); FB.CanvasClient.startTimerToSizeToContent(); }); </script> </body> </html> Also the file xd_receiver.htm is loaded as I can see in Firebug. But my problem is that for example the request-form is not loaded. My code: <fb:serverFbml> <script type="text/fbml"> <fb:fbml> <fb:request-form method="post" action="<?php echo $config->site; ?>index.php" type="appname" invite="true" target="_top" content="content"> <fb:multi-friend-selector actiontext="text" rows="3" showborder="true" target="_top"/> </fb:request-form> </fb:fbml> </script> </fb:serverFbml> I can see the code with Firebug but the form ist not displayed by Facebook. 2 or 3 weeks ago it was displayed but in this time I had the tags </fb:fbml> </script> </fb:serverFbml> arround my complete text in the body. 2 weeks ago I had the the problem that nothing any more was displayed. After I removed the tags my app is displayed but not the form. I am searchign the web vor 1 week now and read many Threads about FBML and XFBML in Facebook but nothing worked for me. So thank you in advance for help.

    Read the article

  • Parsing HTML using HtmlParser

    - by Blankman
    My html has 20 or so rows of the following HTML pattern. So the below is considered a single instance of the pattern. Each instance of this pattern represents a product. Again the below is a single instance, it spans multiple rows in the HTML table. <table> .. <!-- product starts here, this html comment is not in the real html --> <tr> <td rowspan="5" class="product" valign="top"><nobr> ????????????</td> </tr> <tr> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> <td class="title" ??????????>?????????</td> </tr> <tr> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> <td class="data" ?????? </td> </tr> </tr> <tr> <td colspan="5" ????????</td> </tr> <tr> <td colspan="6" width="100%">&nbsp;<hr></td> </tr> <!-- product ends here, this html comment is not in the real html --> <!-- above pattern repeats multiple times in the HTML --> .. <table> I am trying to use HtmlParser for this. Parser rowParser = new Parser(); rowParser.setInputHtml(page.getHtml()); // page object represents a html page rowParser.setEncoding("UTF-8"); NodeFilter productRowFilter = new AndFilter( new TagNameFilter("tr"), new HasChildFilter( new AndFilter( new TagNameFilter("td"), new HasAttributeFilter("class", "product"))) The above filter doesn't work, just showing you what I have so far. I need to somehow combine these filters, and use the last td to mark the end of the pattern i.e. the td with the colspan=6 and width=100% with child element hr. I have been struggling with this, and have resorted to Regex'ing but was told numerous times to NOT use regex for html parsing, so here I am! Your help is much appreciated!

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >