Search Results

Search found 13264 results on 531 pages for 'intel mac'.

Page 80/531 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • Impossible to boot Ubuntu on a USB stick (OS X Montain Lion)

    - by user109513
    I know this has been discussed over and over but I still cannot run Ubuntu on a USB stick. Here's the step I followed: 1. I downloaded Ubuntu 12.10 (ubuntu-12.10-desktop-i386.iso) from http://www.ubuntu.com/download/desktop which I renamed 'ubuntu.iso'. I bought my Mac mid-2010, it has an Intel processor. 2. I formated my 16GB USB stick with HFS+ File System following this tutorial: http://www.switchingtomac.com/tutorials/how-to-format-a-drive-or-partition-with-the-hfs-file-system 3. I opened a terminal and typed: hdiutil convert -format UDRW -o ~/Downloads/ubuntu.img ~/Downloads/ubuntu.iso It created ubuntu.iso.dmg 4. I ran 'diskutil list' and identified the device node assigned to the USB. 5. I unmounted it: diskutil unmountDisk /dev/disk2 6. Then, I entered the command: sudo dd if=~/Downloads/ubuntu.img.dmg of=/dev/rdisk2 bs=1m. It seemed to work. A Mac message poped up saying that the system doesn't recognized the disk, I pressed 'ignore'. 7. I ejected the USB using diskutil eject /dev/disk2, then removed the USB. 8. I rebooted the computer, plugged the USB key, pressed ALT.I could see my Macintosh partition and my Windows partition, but couldn't see my USB stick. Any help will be very appreciated :) Victor

    Read the article

  • OpenGL setup on Windows

    - by kevin james
    I have been trying to use OpenGL for two days now. First on Mac, then on Windows. The problem with Mac is that it doesn't support the newer versions of OpenGL. I ran a tutorial that actually did get some things working, but it only works in XCode (i.e., I can't create a new file, paste in the same code, and get it to work). Because of these issues, I moved to Windows. My Windows 7 has OpenGL 4.3, which is the same that is used in alot of other tutorials. However, not one of these tutorials gives any instruction on how to set it up for the first time. I have come across some vague posts saying that some libraries need to be linked. But WHAT libraries, and HOW do I link them? Please help. I am pretty desperate to set this up as this project is due for work soon. I have actually used OpenGL before at my university, but the computers already had everything set up. The project itself is very easy, but setting up OpenGL is not something I know how to do.

    Read the article

  • Transition from 2D to 3D Game development [closed]

    - by jakebird451
    I have been working in the 2D world for a long time from manual blitting in windows to SDL to Python (pygame, pyopengl) and a bunch in between. Needless to say I have been programming for a while. So a while ago I started to program in OpenGL via C++ on my Mac. I then got a little intricate with my work after a while (3D models with skeleton structure and terrain development). After a long time of tinkering, I stopped due to the heavy work just to yield a low level understanding of how OpenGL works. Still interested in Graphics and Game Development I went on a search for a stable game engine with some features to grow on. Licence Requirement: Anything other than GPL (LGPL will do) OS Requirement: Mac & Windows Shader: GLSL or CG (GLSL preferred due to experience) Models: Any model structure with rigging (bone) support & animation I am looking at http://www.ogre3d.org/ currently and am starting to meddle around with some examples. However I am a little reluctant to spend a lot of time on it only to yield another dead end. So instead of falling down a spiraling black pit, I am posting my question to you guys to lead me in the right direction based on my requirements. How was your experience with the engine you recommend? Is it well documented? Does it have well documented examples? Any library requirements (Boost, libpng, etc)?

    Read the article

  • NFS mount of /var/www to OS X

    - by ploughguy
    I have spent 2 hours trying to create an NFS mount from my Ubuntu 10.04 LTS server to my OS X desktop system. Objective: three way file compare between the code base on the Mac, the development system on the local Linux test system, and the hosted website. The hosted service uses cpanel so I can mount a webdisk - easy as pie - took 10 seconds. The local Ubuntu box, on the other hand - nothing but pain and frustration. Here is what I have tried: In File Browser, navigate to /var/www/site and right-click. Select share this folder. Enter sharename wwwsite and a comment. Click button "Create Share". Message says - you can only share file systems you own. There is a message on how to fix this, but the killer is that this is sharing by SMB. It will change the LFs to CR-LFs which will affect the file comparison. So forget this option. In a terminal window, run shares-admin (I have not been able to convince it to give me the "Shared Folders" option in the System Administration window - Maybe it is somewhere else in the menu, but I cannot find it) define an NFS export. Enter the path /var/www/site, select NFS enter the ip address of the iMac and save. On the mac, try to mount the file system using the usual methods - finder, command line "mount" command - not found. Nothing. Tried restarting the linux box in case there is a daemon that needs restarting - nothing. So I have run out of stuff to do. I have tried searching the documentation - it is pretty basic. The man page documentation is as opaque as ever. Please, oh please, will someone help me to get this @38&@^# thing to work! Thanks for reading this far... PG.

    Read the article

  • iTunes for Ubuntu Studio

    - by soundblastdj
    I have finally gotten my old Mac HDD sorted out, and now I would like to know if anybody has either: a) a way to run iTunes without wine, as it did not work out well for me the last time I tried it, or b) any other media player that will sync with an iPod and, more importantly, use the same file system. When my Mac died, I started to get into open source. I bought a MacBook Air, only out of necessity. For almost two years now, I have not once backed up or synced my iPod. I am getting nervous that it may give up on it's life soon and would like to find a solution. I don't have enough room on my Air, and it would just erase my iPod anyway... Another thing that I am having trouble with is the way iTunes arranged the music. Now, it is arranged all by artist, then album, the song and I would like to have a media library, but somewhere around 400GB of music is a lot to sift through (I have attempted in the past). Thus I am looking for something that will use the same library format. A side note: As I was writing this I started to wonder; Is a Hackintosh in order here? If somebody will give me instructions on how to install MacOSX for free (maybe Mavericks?) in a dual boot with Ubuntu, I will be ever grateful. :) Thanks, soundblastdj

    Read the article

  • Should the MAC Tables on a switch Stack be the same between sessions?

    - by Kyle Brandt
    According to Cisco's documentation: "The MAC address tables on all stack members are synchronized. At any given time, each stack member has the same copy of the address tables for each VLAN." However, when logged into the switch I see the following: ny-swstack01#show mac ad | inc Total Total Mac Addresses for this criterion: 222 ny-swstack01#ses 2 ny-swstack01-2#show mac ad | inc Total Total Mac Addresses for this criterion: 229 ny-swstack01-2#exit ny-swstack01#ses 3 ny-swstack01-3#show mac ad | inc Total Total Mac Addresses for this criterion: 229 ny-swstack01-3#exit ny-swstack01#ses 4 ny-swstack01-4#show mac ad | inc Total Total Mac Addresses for this criterion: 235 ny-swstack01-4#exit ny-swstack01#show mac ad | inc Total Total Mac Addresses for this criterion: 222 Going back and forth this isn't just because it is changing over time either, within certain sessions there are entries that I don't seen from the master session. We are currently waiting to hear back on CIsco from this, but has anyone run into this before? I stumbled upon this when looking into Unicast flooding, one of the hosts that is a destination MAC of flooding has a MAC entry that appears in session 3, but nowhere else. Also, I checked an all sessions show the same aging time.

    Read the article

  • Loading latest firmware iwlwifi-6000

    - by grzeh
    I just installed 11.10 on Dell XPS 15z. Somebody know why kernel does not load the latest firmware for wifi Intel Centrino Advanced-N 6230. $ modinfo iwlagn |grep iwlwifi-6000 firmware: iwlwifi-6000g2b-5.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6000-4.ucode In package linux-firmware there is latest version (iwlwifi-6000g2b-6.ucode) $ dpkg -L linux-firmware | grep iwlwifi-6000 /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-6000g2b-5.ucode **/lib/firmware/iwlwifi-6000g2b-6.ucode**

    Read the article

  • How to install 3d support?

    - by Gonzalo
    I'm trying Natty and after an upgrade I received this message: "Sorry, you don't have 3d support, install it for your graphic hardware to get Unity or please reboot and select 'Classic session' at startup." So I want to install 3D support but I don't know how to. My machine is a Sony Vaio VGN-SR29XN Laptop with Intel Graphics, but I would like to know the general instructions. P.S. : I've no problem with the CLI, I just don't know how to proceed in this particular case (what driver, or program...).

    Read the article

  • No sound through hdmi to TV

    - by Santosh
    I have a Toshiba Satellite Laptop Model P745-S4102 with Intel integrated graphics and Ubuntu 12.04 LTS installed recently. When I connect my HDMI TV to it I only get video through it and no audio. In the System Settings - Sound, there is no option to select HDMI as the output. I read other threads in this site and it seems like at least guys had HDMI option but no sound. I don't even get that. Please help!!

    Read the article

  • How do I install lubuntu? (kernel panic)

    - by melvincv
    Please help me install Lubuntu 12.04 i386 on an old computer. I select the "Try Lubuntu without installing" and it crashes with a kernel panic. Rarely I do get to the live OS, but soon the display goes blank. The messages log gives me '[drm] ERROR GPU hung/wedged' The specs are: Pentium 4 2.4GHz 1GB DDR RAM 40GB PATA HDD Intel 845GL chipset (8MB framebuffer, 64MB shared system memory set in the BIOS)

    Read the article

  • Will Ubuntu 11.04 work on my old pc?

    - by M4tic
    It has an old SiS based graphics chip with 64mb memory, there were never 3D drivers for them. Ubuntu 10.10 doesn't even boot on it and my laptop, a Lenovo N200 with intel 9something graphics 128mb so I'm really worried. Broadband prices don;t come cheap in South Africa so the download has to be worth it. I can wait for the shipment but I've since orderd 10.10 and it hasn't come, so I don't know if I'm barred from using that service since I've been sent a disc every release.

    Read the article

  • What would be the best way to install (distribute) dynamic libraries in Mac OSX using CMake/Cpack ?

    - by YuppieNetworking
    Hello all, I have a project whose artifacts are two dynamic libraries, let's say libX.dylib and libY.dylib (or .so for linux distributions). There are no executables. Now I would like to distribute these libraries. Since I already use CMake to compile it, I looked at CPack and successfully generated .tgz and .deb packages for Linux. However, for Mac OSX I have no idea and the CPack Wiki about its generators did not help me much. I managed to generate a PackageMaker package, but as clearly stated at this packagemaker howto, there is no uninstall option when using this util. I then read a bit about Bundles, but I feel lost specially since I have no executable. Question: What is the correct way to generate a package for Mac OSX using CPack? My ideal scenario would be either something that installs as easily as a bundle or as a deb file in debian/ubuntu. Thanks for your help Edit One more detail: the code to one of these libraries is not open, so I can't expect the users to do a cmake; make; make install That's why I want a .deb, .tar.gz, bundle or whatsoever.

    Read the article

  • Laptop screen not detected but ubuntu working on other monitor

    - by Aymane El Baamri
    I have a laptop with with intel celeron inside 64 bit, the 64 bit amd ubuntu 11.10 is working on the laptop, just it wont detect the laptop screen but the same live usb worked on amd 64 pc, When i connected the desktop computer monitor to the laptop it worked perfectly with 1920x1080 screen, battery, WIFI. Im not sure if its cause i made the usb it with LiLo live usb creator on the desktop pc, should i remake the usb on the laptop?

    Read the article

  • Dell Latitude E6420 in-built microphone not working

    - by user38845
    I'm running with Ubuntu 12.04 64bit on Dell Latitude E6420. The inbuilt microphone is not working, and is not listed on the sound settings dialog. According to lspci, the device is: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) I've also looked at alsamixer, and can see a "mic" and "dock mic" but fiddling with these and increasing to max amplification doesn't appear to change anything. Note: I've raised a certification question on the same topic here: https://answers.launchpad.net/ubuntu-certification/+question/200678

    Read the article

  • Ubuntu 12.10 hangs on checking battery state

    - by Waxolunist
    I have a Thinkpad X230. After a boot it hangs with checking battery state [OK]. A second boot is most times successful. What I have seen in other posts doesn't fit to my problem, because My graphics card is Intel 3rd Gen Core processor Graphics controller (not nvidia) It happens not always I have a fresh installed 12.10 with the latest updates (no upgrade) Does anyone experience the same issues or has a solution?

    Read the article

  • WIfi Problems Ubuntu 13.10

    - by user289429
    i've been searching the forums for two days now but none of the answers seems to work for me. I have an acer extensa 5630 which has an Intel WIfi 5100. But even when i am right next to my router i cannot detect the wireless network. The weird thing is, that when i create a hotspot from my mobile phone it automatically detects it and connects to it.I think i do have the correct drivers installed. Thanks

    Read the article

  • Steam Repository Help?

    - by xsccmx
    Steam runs fine in Raring, not ready for Saucy for another few months, in the meantime this repo is 404ing me every time I do an "apt-get update" http://ppa.launchpad.net/ubuntu-xswat/x-updates/ubuntu raring This ppa is supposed to allow me to get the latest updates for my Intel Graphics card. I tried searching the net to no avail but does someone know the correct ppa for this? Any help is appreciated, thanks!

    Read the article

  • No sound on Dell Inspiron 6400n

    - by yanski
    After a clean install of Ubuntu 12.04 on my Dell Inspiron 6400n Laptop there is no sound on any application I use apart from the log in screen ready noise. If I click on the speaker icon on the top panel then sound settings it tells me that the default playback device is S/PDIF. In alsamixer the slider is set to zero. I am sure it should be HDA intel or similar. How can I get the sound working please...?

    Read the article

  • Problem connecting to certain wifi networks

    - by Romas
    I'm using lenovo u300s (it has Intel Centrino Wireless-N 1030 card), and I can connect to wireless network at home with no problem, but I can not connect to any networks at my university. I'm not sure if it's the case but most of university networks are open and you need to sign up your username as you enter browser. There is also an eudoroam network, but I can not connect to it either. Any suggestions? Yes I have the latest ubuntu version.

    Read the article

  • Ways to support manually executed tests? (that can be used on a Mac)

    - by Rinzwind
    Are there any tools that can be used on a Mac to support manually executed tests? I have a number of tests that I'm executing manually and which I'm currently documenting using merely a plain text file. "Tools" can be interpreted rather loosely here, anything that's a step up from the plain text file would be useful: a template for some suitable application, supporting AppleScript scripts, a web-based system, a full-blown application ... Some things that would be great to have better support for (see also the example below): Checking off each step while you're manually executing the test. Showing the next step(s) in a small window that is always kept in front of all other windows. Automatically updating the 'last tested' and 'using svn revision' info. Keeping a record of all previous testing rounds (not just the last one). ... Any suggestions for any such "tools" that can be used on a Mac? An example (faked) entry from the plain text file to give you a better idea of what I'm looking for: - Check that exported web pages render properly in Safari. Last tested: 2010-03-24 Using SVN revision: 1000 Steps: - Open a new document. - Add some items to the document. - Export the document to a web page "Test.html" in a new folder "Export Test" on the Desktop. - Open the web page in Safari, script: tell application "Finder" open file "Test.html" of folder "Export Test" of desktop end tell Expected results: - The web page should appear properly with all items shown. Clean up steps: - Remove the folder "Export Test" from the Desktop. ( Note: for those unaware, the snippet of AppleScript in the above can be executed from most text editing applications through the Services menu by selecting the snippet and using: the application menu Services Script Editor Run as AppleScript. This is quite useful to automate some steps for tests that are difficult to automate as a whole. )

    Read the article

  • RAID1 Hard drives with Intel Controller

    - by Dave_H
    I have an older server with 2 35GB hard drives arranged as a RAID-1 drive. I have 3 open bays, I'd like to add 2 more hard drives to the open bays and have all 4 drives configured as a RAID-1 drive that Windows sees as 1 larger drive. Is this possible? If not, the new drives are 2x as big as the old drives, is it possible to replace 1 of the old drives and rebuild then replace the second drive and rebuild and somehow expand the array to use all of the available space? The server is using an Intel hardware raid controller, the software interface is Intel Storage Console v2.12.

    Read the article

  • Mac OS X: network disabled because security breach

    - by fireeyedboy
    Dear all, I just recieved a message on my Mac OS X system telling me (loosely translated from Dutch): "The network has been temporarily disabled because the network's security was breached." (It's a wireless WPA2-PSK secured network BTW) I looked in the logs of my router (a Zyxel P-2602HW-D1A) only to see a few (outbound) "syn flood TCP ATTACK" logs, but those were from like a week ago, other than that nothing. What tools on Mac OS X do I have to analyse this security breach occurence? Are there some security logs on Mac OS X that I can inspect? What other measurements should I take? And how serious should I take this warning from Mac OS X? System: Macbook Pro Intel Core 2 Duo 2.2 Ghz OS: Mac OS X 10.5.8 Network: wireless WPA2-PSK Relevant software: Parallels Desktop with Windows XP (was open, but stopped at the time) Other systems on my network: Windows XP SP3 desktop (was running at the time) If you need any more info, don't hestitate to ask. Thanks in advance.

    Read the article

  • Triple monitor setting in Linux with USB-HDMI adapter

    - by Oscar Carballal
    I'm trying to set up a triple monitor desktop at my office using Fedora 17, but it seems impossible, let me explain the setting: Laptop ASUS K53SD with 2 graphic cards, Intel and nVidia (Screen controled by Intel card) 24" Full HD monitor connected to the HDMI output (controlled by Intel card) 23" Full HD monitor connected to an USB-HDMI adapter (via framebuffer in /dev/fb2, apparently) VGA output (not used) controlled by nVidia card First of all, the USB-HDMI adapter works perfectly, it gives me a green screen (which means the communication is OK) and I can make it work if I set up a single monitor setting via framebuffer in Xorg. Here I leave the page where I got the instructions: http://plugable.com/2011/12/23/usb-graphics-and-linux Now I'm trying to set up the the two main monitors (laptop and 24") with the intel driver and the 23" with the framebuffer, but the most succesful configuration I get is the two main monitors working and the third disconnected. Do you have any idea what can I do to make this work? Here I leave my xRandr output and my Xorg conf: -> xrandr Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA2 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 531mm x 299mm 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 60.0 The Xorg file: # Xorg configuration file for using a tri-head display Section "ServerLayout" Identifier "Layout0" Screen 0 "HDMI" 0 0 Screen 1 "USB" RightOf "HDMI" Option "Xinerama" "on" EndSection ########### MONITORS ################ Section "Monitor" Identifier "USB1" VendorName "Unknown" ModelName "Acer 24as" Option "DPMS" EndSection Section "Monitor" Identifier "HDMI1" VendorName "Unknown" ModelName "Acer 23SH" Option "DPMS" EndSection ########### DEVICES ################## Section "Device" Identifier "Device 0" Driver "intel" BoardName "GeForce" BusID "PCI:0:02:0" Screen 0 EndSection Section "Device" Identifier "USB Device 0" driver "fbdev" Option "fbdev" "/dev/fb2" Option "ShadowFB" "off" EndSection ############## SCREENS ###################### Section "Screen" Identifier "HDMI" Device "Device 0" Monitor "HDMI1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "USB" Device "USB Device 0" Monitor "USB1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Solid State Drive Occasionally Freezes For A Minute While OS Is "Beach Balling"

    - by Boris_yo
    Almost a month ago I bought Intel 330 128GB solid state drive, migrated my data with Intel branded limited-feature Acronis from old HDD to new SSD, optimized with Intel Toolbox and started using it. Occassionally I get close to 1 minute freezes while seeing operating system "beach balls" and animations still work, I can interact and click on something but nothing responds, nothing loads. Recently a couple of such freezes occurred in shorter amount of time in a row. I have noticed that if I stop interacting with laptop, the freeze lasts less time than if I was interacting with laptop. But the bigger problem is when freeze just does not end and computer keeps being stuck unlil it is more than half hour and I run out of patience to keep waiting and feeling I need to restart the system because I am not getting anywhere. Such freeze happened while laptop was cold booting into Windows 7. This is when freeze hang occurred and I had to restart, only later to be greeted with Windows recovery screen stating something about faiure of boot sector and asking to insert Windows repair CD. But after I restarted, Windows booted successfully and all was well. I have filmed video of freeze hang occurring in cold boot which you can see here (on video page look below for description): http://www.youtube.com/watch?v=8b7MQlcDTUs As I have mentioned in the beginning, the SSD is less than a month old but here is S.M.A.R.T statistics just in case (TRIM is enabled btw according to CrystalDiskInfo): I want to emphasize that this SSD is the only drive I have, yet it is working in RAID mode (it was enabled initially in BIOS by previous laptop's owner) on Intel Rapid Storage drivers. I am contemplating about switching to AHCI mode but want to be sure this won't cause data loss. Additionally, the stock firmware is the only firmware available currently, yet Intel does not respond to my posts in their community board. If anyone here has this SSD model or generally has experience with SSD drives, I would love to know your thoughts.

    Read the article

  • Windows 8 redraw/repaint issues

    - by obuolys
    This is what happens when I scroll a window (click for full-size versions): It can happen in any application, even in Chrome. My computer's specs: ASUS p8z77-v motherboard Intel Core-i7 3770k Intel HD Graphics 4000 integrated VGA Windows 8 Pro x64 I have tried to reinstall VGA drivers, tried to install an older driver from intel.com or asus.com, but no success with resolving the issue. Currently I am using driver version 2867. How can I fix this?

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >