Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 81/97 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Hyper-V Server 2012 with Zambezi AMD FX-Series - Hardware assisted virtualization not present

  - by Vazgen

  I'm trying to set up VDI across Windows Server 2012 VMs running on Hyper-V 2012. The wizard's compatibility check for the Virtualization Host server failed with "Hardware-assisted virtualization is not present on the server". I'm running an FX-8120 CPU and have the ASUS M5A97 motherboard. I know I'm supposed to enable No-Execute (Hyper-V Hardware Considerations) but I cannot find that or any other synonyms of it in my motherboards UEFI BIOS (NX, XD, EVP, XN... nothing). I found this: PAE/NX/SSE2 Support Requirement Guide for Windows 8 which in short says "Windows 8 and Windows Server 2012 requires that systems must have processors that support NX, and NX must be turned on for important security safeguards to function effectively and avoid potential security vulnerabilities." this leads me to believe NX is on by default if I was able to get this far and install Hyper-V 2012 and Windows Server 2012.. Also I tried to disable AVX in cmd with "bcdedit /set xsavedisable 1". Did not resolve My processor is Zambezi FX-8120 and also supports RVI/SLAT/other synonym: processor: Newegg Processor FX-8120 support proof: AMD Processors with Rapid Virtualization Indexing Required to Run Hyper-V in Windows 8 What's going on here? I bought this CPU specifically after I had the same problems with an older AMD Athelon II and made sure to buy one with AMD-V and RVI. Thank you

  Read the article

• VMWare ESXi 4.1- 5.1 installation hang

  - by osij2is

  I'm well aware that I'm trying to install VMWare ESXi 5.1 on hardware that's not on the HCL. I can't find my motherboard on the ultimatewhitebox site as well. I acknowledge these issues in advance. What I'm trying to find is someway to access the logs during installation or see a console or log file to see where the installation is hanging at and remove a device or change a setting in the BIOS. The installation is hanging, not getting a purple screen of death. I thought by hitting ALT+F10 or F12 (or some key combination as such) would enable me to see the console but no such luck. I haven't been able to find much within the ESXi online documentation either. Here's the parts I'm using: AMD Phenom II x3 700 MSI 890FXA-GD70 (IOMMU capable) 16GB DDR3 1333 RAM (2x8GB DIMMs) Intel Pro 1000 (Dual-GbE) PCIe x4 (removed during installation) LSI 9211-8i PCIe (removed during installation) LSI 9201-16i PCIe (removed during installation) Matrox video card BIOS settings: IOMMU is enabled (during 5.1 IOMMU successfully loads) AHCI is enabled (hangs for 4.1) Both onboard Realtek NICs are disabled For ESXi 5.1, the installation hangs after vmkapi_v2_0_0_0 is loaded. For ESXi 5.0, it hangs when loading the vmklinux_9 module. For ESXi 4.1 U3, the installation hangs during loading of ahci module. Again, I'm looking for some way to view a console (service console?) or log file during or after an installation attempt to see what verbose error messages or logging can lead me to solving this problem.

  Read the article

• 4in6 tunneling (via OpenVPN?)

  - by Deshene

  I have a local network with internet access. But unfortunately IPv4 internet connection speed is limited to 1mbps, which is realy sad. Fortunately I have a native IPv6, and there is no connection speed limit over IPv6. So, in order to get a good internet connection I made a plan: connect to the VPN-service over IPv6, and pass all IPv4 traffic through IPv6 tunnel, or something like that, I think you get the idea. I suggested to use service like HideMyAss.com, but unfortunately they don't support IPv6. The question is: Is there any existing VPN service that will make my dreams come true, and is easy to use, which I could connect over PPTP or OpenVPN (I want to set up connection to VPN in my router settings). Edit: It seems like there are couple of VPN services that supports IPv6 (it's odd, but the biggest VPN services support only IPv4), and there is none providing 4in6 tunnels. So, I came to the following solution: rent a VPS with IPv6 address, and manually setup 4in6 tunnel. I'm not good at networking, never did things like that, and don't know where to start, and what should I do. The use case, as I undestand, should look like this: I connect from my home computer to the VPS via OpenVPN, and after that all my IPv4 traffic pass through IPv6 (server do the job). OpenVPN - because I want to configure VPN connection to server in my router (Asus RT-N16?). How can I achieve this?

  Read the article

• DVD-ROM: Pioneer DVD-115GA not being detected.

  - by Wesley

  Specs to put things in context: AMD Athlon XP 2400+ @ 2.00 GHz / 2 x 512 MB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So this computer is actually an upgraded EMachines T2482. I found a used DVD-ROM for cheap... the Pioneer DVD-115GA. I originally had a plain DVD Reader (Lite-On XJ-HD166S) which was quite useless. So I basically did a simple swap of the drive and powered up the computer. The drive could open and close, and I put in a DVD and it was spinning, but no detection. Going into the BIOS, the drive was not detected. (The IDE cable connecting the DVD-ROM is connected to the CD-ROM below it and then attached to the secondary IDE port on the motherboard.) So I started all the way up and tried to scan for hardware changes in Computer Management. Still, nothing. I have the software downloaded from the Pioneer site, and that couldn't detect anything. So what else can I try to hopefully get my DVD-ROM recognized by the BIOS? Thanks in advance!

  Read the article

• Linux AMD-FX 8350 temperature monitoring

  - by HyperDevil

  I’m trying to get the CPU temperature for my AMD-FX8350 on Debian Squeeze. I ran sensors-detect and then sensors, but I only get my motherboard sensors (it8720-isa-0228). There are three temperature values there but I assume those are not for the CPU. it8720-isa-0228 Adapter: ISA adapter in0: +1.36 V (min = +0.00 V, max = +4.08 V) in1: +1.50 V (min = +0.00 V, max = +4.08 V) in2: +3.38 V (min = +0.00 V, max = +4.08 V) in3: +2.93 V (min = +0.00 V, max = +4.08 V) in4: +3.07 V (min = +0.00 V, max = +4.08 V) in5: +4.08 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) in7: +2.93 V (min = +0.00 V, max = +4.08 V) Vbat: +3.01 V fan1: 3375 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 1730 RPM (min = 10 RPM) fan5: 0 RPM (min = 0 RPM) temp1: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor temp2: +53.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode temp3: +65.0°C (low = +127.0°C, high = +90.0°C) sensor = thermal diode cpu0_vid: +0.000 V Is there anything I am missing? I also loaded the K8temp and K10temp modules and ran sensor-detect without any results. I do see this message in dmesg: hwmon-vid: Unknown VRM version of your x86 CPU

  Read the article

• SuperMicro BMC on OpenSuSE Linux --cannot access from LAN

  - by Kendall

  Hi, I have an (old) SMC-001 IPMI device on an (old) X6DVL-EG2 motherboard. My problem is that I cannot access the BMC from LAN. I'm also getting some interesting output from ipmitool. First, the setup. I enable Console Redirection in the BIOS, turn BIOS Redirection after POSt to "disabled". I then modprobe'ed for ipmi_msghandler, ipmi_devintf and ipmi_si. I then found ipmi0 under /dev. So far so good. Since I want console redirection over serial, I modified /boot/grub/menu.lst: http://pastebin.com/YYJmhusQ I then modified "/etc/inittab" as follows: S1:12345:respawn:/sbin/agetty -L 19200 ttyS1 ansi Networking I set as following, using "ipmitool" ipaddr: 192.168.3.164 netmask: 255.255.255.0 defgw: 192.168.3.1 The above are correct for my environment. To test it I do: ipmitool -I open chassis power off which responds by powering off the machine. When I to access from another computer on the network, however, I get an error message: host# ipmitool -I lanplus -H 192.168.10.164 -U Admin -a chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status "Admin" seems to be a valid user name: host# ipmitool -I open user list 1 2 Admin true false true USER The interesting output from ipmitool I initially mentioned: host # ipmitool -I open lan set 1 access on Set Channel Access for channel 1 failed: Request data field length limit exceeded Also, newload4:/home/gjones # ipmitool channel info 1 Channel 0x1 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : session-less Active Session Count : 0 Protocol Vendor ID : 7154 Get Channel Access (volatile) failed: Request data field length limit exceeded The output of "ipmitool -I open lan print 1" is here: http://pastebin.com/UZyL6yyE Any help/suggestions is greatly appreciated; I've been working with this thing for a few hours now with no success.

  Read the article

• Overheating computer

  - by Samurai Waffle

  My computer overheats somewhat frequently, usually during intense use. And by intense use I mean browsing the internet while downloading, or gaming. It even overheats on extremely old games though, Master of Orion 2, which was developed for Windows 95. My computer has a Pentium 4 Ghz processor, 2 GB of ram, and is running Windows XP. One of the symptoms it has after overheating, is that it'll turn on immediately afterwards, but won't show any video on my monitor. I usually have to wait at least 5 minutes (mostly at least 10) before I can get it to turn on and show video on my monitor. I also usually have to wiggle around the graphics card a little bit, which is the ASUS A9550 Series with 256 MB. I'm not sure exactly what is causing the computer to overheat. At first I thought it was the video card, but after I noticed it was doing it while playing Master of Orion 2, I'm not so sure, because that game can't be making the video card work all that hard. So how exactly can I pinpoint the problem? Thanks for any help provided. Edit: Okay I downloaded the programs that you specified, and will start benchmarking my system to try and pinpoint what's overheating. What is the temperature range for when it's getting to hot? Also I have an abundant amount of software experience with computers, but unfortunately not to much hardware experience.

  Read the article

• Windows Audio Issue

  - by Nikki

  This one is driving me nuts. Hoping someone can shed some light. I'm running windows 7 using onboard audio. It's been fine for over 2 years but lately there's a problem every time I play audio. I hear a small soft burst of static and the volume turns itself down from 50% to 23%. Once at 23%, it plays fine. No related events logged in viewer. No reported problems with the device. Different headphones, same problem. I played around with audio settings for hours but the problem persists. EDIT: ok more info: Motherboard: ECS G31T-M LGA775 System info displays this: Name High Definition Audio Device Manufacturer Microsoft Status OK PNP Device ID HDAUDIO\FUNC_01&VEN_1106&DEV_E721&SUBSYS_10192683&REV_1001\4&3D4E739&0&0001 Driver c:\windows\system32\drivers\hdaudio.sys (6.1.7600.16385, 297.00 KB (304,128 bytes), 14/07/2009 9:51 AM) I'll keep adding info as I find it. The question I want resolved is; Is it faulty hardware? If so, I can buy a sound card. I can't imagine software is responsible since I haven't installed anything new for weeks. Virus scans are clear as well. The static burst is irritating to say the least. Tried 2 different headphones and separate speakers. Same problem. I know it's not an easy problem but I was hoping someone had encountered the same thing.

  Read the article

• Install Ubuntu on a new netbook?

  - by torbengb

  I'm planning to buy a netbook, and I am considering to install Ubuntu on it. It would mainly be used by my wife at home for web browsing and email at home (lightweight is important, hence a netbook!), and we'd occasionally bring it along on travels (mostly as digital photo dropzone). I want to use Ubuntu instead of Windows because I'm sick of all the Windows hassle and updates. I'm not concerned about Windows applications; I'd switch to native alternatives as far as possible because really only Firefox and something like Picasa are needed. I'm considering an ASUS Eee PC 1001P or an MSI Wind U100 or an Point of View Mobii II (click the links for specs; nevermind that the rest is German). I'm not in the USA. Whatever I buy will most likely have Windows 7 on it but no optical drive. I would also buy a large-ish USB stick but not an external optical drive. Should I (and can I) install Ubuntu alongside Windows 7, or remove Windows? If I remove Windows first, how would I be able to reinstall it if I change my mind? Can I make a backup? Is a recovery CD usually provided? Should I choose the regular Ubuntu, or the Ubuntu Netbook Remix (UNR)? Does UNR allow me to install additional applications just as easily? Note: I'm asking about Ubuntu vs. Windows; let's skip the hardware discussion for now. Edit: I'm assuming that Windows is already installed; if it isn't then I would only install Ubuntu and this question is irrelevant.

  Read the article

• Migrating Windows XP BOOT.INI Settings to Windows 7 Boot-loader

  - by Synetech inc.

  Two months ago my motherboard died, so I bought a used computer that came with Windows 7. I have since installed my old hard-drive, which had Windows XP on it, in this system. What I am trying to do now is to figure out a way to migrate the settings from XP's BOOT.INI into 7's boot-loader. Below is the BOOT.INI I used in XP (I have reduced the strings and updated the disks to point to the new location of the old HD. Oh and I am not clear on the drive letters. In XP, I could boot the recovery console or MS-DOS from a file in C:\ that contains the boot-sector. I am not sure what drive letter it would be called now—I had to manually change all the drive letters of the old partitions in Windows 7 because it auto-assigned them all wrong/differently). [boot loader] timeout=10 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="XP (Safe)" /safeboot:network /sos /bootlog /noguiboot C:\CMDCONS\BOOTSECT.DAT="Recovery Console" /cmdcons C:\BOOTSECT.DOS="MS-DOS 7.10" /win95 I have looked around, and have only been able to find some bcdedit commands to add XP to the boot-loader, but none that include information on setting safe-mode for it (or changing any of the XP load options for that matter). Not surprisingly I suppose, I have not found anything on adding the XP recovery console or DOS to the Windows 7 boot-loader. (Yes, I tried EasyBCD, but that did not help; it had no options for XP, and the best I managed was to get a choice of booting 7 or normal-mode XP—choosing XP didn't even give the old XP boot menu.) Can anyone please tell me how to export the entries in XP's boot.ini to 7's boot-loader so that on boot, I can choose to load the following: Windows 7 Windows 7 (Safe-mode) (Windows 7 (The Win7 counterpart of the Recovery Console)) Windows XP Windows XP (Safe-mode) Windows XP (Recovery Console) MS-DOS 7.10

  Read the article

• Win7 Pro x64 task manager hangs when restarting explorer.exe after waking from sleep

  - by Brandon Dybala

  I have a desktop running Windows 7 x64 Pro, set for Hybrid Sleep on a wired network. Wakeup is only enabled from the keyboard (wake on mouse and Wake-On-LAN are both disabled). Sometimes when it wakes up, there is no network connectivity. The notification area icons for both network and volume don't respond to clicks. If I open the Network and Sharing Center, clicking the red X doesn't do anything. Restarting does fix the problem, but I'm looking for a solution that does not require restarting (if at all possible). Drivers are all up to date. I've tried opening Task Manager and restarting the explorer.exe process, but Task Manager freezes for a few minutes, the "New Task" dialog closes, and explorer.exe has not restarted. CPU and memory usage are both normal. One thread suggested making sure the BIOS was set for S3 sleep mode only (not S1 or S1 & S3), but I haven't checked this yet. Going back to sleep and waking back up does not help. So far only a reboot has fixed the issue. System specs: Windows 7 x64 Pro Asus P8Z68-V PRO/GEN3 128 GB Crucial m4 SSD (Firmware version 0309) Intel Core i7 2600 3.4 GHz 16 GB RAM Any ideas? Brandon

  Read the article

• Windows 7 migration led to crashdump and hibernate problems

  - by MartyMacGyver

  Note: I'm using a Samsung 830 SSD (migrated OS from defunct PC) and other than these two (interrelated?) problems it's working fine. Surprisingly well actually. Motherboard is a ASUS P8Z77-V Deluxe. Problem 1: Crashdumps are not working. volmgr throws an event 45 "The system could not sucessfully load the crash dump driver." whenever you modify crashdump settings, or if a crashdump occurs. diskpart says that "Crashdump disk = no" which is peculiar. Problem 2: Hibernation isn't working. Again, volmgr throws the same event 45 if you try to hibernate. The screen blanks, then you're at the password prompt. No sleepage occurs. (Yes, I know I should avoid hibernation on SSDs but it's enabled and the hibernation file is definitely there so I'd like to know why it's failing). Diskpart claims "Hibernation file = no" which is again peculiar... it's plainly there and getting created by the system. The common factor appears to be volmgr and/or the crashdump "service" (if that's what it is). I'd much rather get this working than spend days reinstalling and reconfiguring the entire system, especially when it's working perfectly otherwise. Sleep works as well (as long as it's not hybrid sleep). So, what defines the flags "Crashdump disk" and "Hibernation file disk" in diskpart's output? And what might be going wrong that's breaking crashdumps in particular?

  Read the article

• New 3TB HDD, can see full 2.7TB in Linux and Windows, but shows up as 801.6GB in BIOS

  - by Ben Lee

  I recently purchased a Seagate Barracuda 3TB drive (ST3000DM001). After installing it, my BIOS recognized it but reported the size as 801.6gb. I went ahead and booted into Linux anyway (Ubuntu 11.10 64-bit). Linux saw it as a 2.7TB. Following some online instructions (don't have the link handy, unfortunately), it looks liked converting this drive to GPT was recommended. So I used gparted to do that, then formatted it to NTFS also using gparted. (I'm using NTFS because my machine is daul-boot and I want to have access to the drive in Windows too). I rebooted to Windows (Windows 7 64-bit), and Windows also sees the drive with 2.7TB free. Everything seems to be working fine. The only issue is that my BIOS is still reporting the drive as 801.6GB. My motherboard is an ASRock 770 Extreme3 and BIOS is the latest version. Since everything seems to be working with the new drive anyway, I'm hoping that the fact that the BIOS is reporting the wrong size is not an actual problem. But honestly, I don't really know. Anyone out there more familiar with this know if this could potentially cause any problems in the future? Any way to get the BIOS to report the correct size?

  Read the article

• Problem setting command-line console resolution. vbeinfo in grub2 does not report all resolutions

  - by Kent

  I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub: grub> vbeinfo VBE info: version: 3.0 OEM software rev: 1.0 total memory: 8128 KiB List of compatible video modes: Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved 0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x114: 800 x 600 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 0x115: 800 x 600 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x101: 640 x 480 x 8 Packed 0x103: 800 x 600 x 8 Packed 0x111: 640 x 480 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 Configured VBE mode (vbe_mode) = ox101 grub> Relevant parts of sudo lspci -v: ... ... 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... ... ... Any ideas on how I can set the console resultion like I want it?

  Read the article

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

  - by Pete Roberts

  Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

  Read the article

• Making the iPhone work with stripped down Windows XP

  - by Gabriel

  Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

  Read the article

• Will this increase my Virtual private Server failing rate ?

  - by Spencer Lim

  Will this increase my Virtual private Server failing rate if i :- install Microsoft Window Server 2008 Enterprise install SQL server enterprise 2008 install IIS 7.5 install ASP.Net Mvc 2 install Microsoft Exchange << should live inside MWS2008 ? or standalone without OS? install Team foundation server << should live inside MWS2008 ? or standalone without OS? on one mini VPS with specification of DELL Poweredge R710 shared plan DDR3 ECC RAMs 16GB and -- 1GB for this VPS using DELL PERC 6i raid controller (this thing alone about 1.5k-2k) and the SAS HDD (15K RPM) (146GB) -- 33GB to this VPS each hdd is freaking fast over 300MB read / write possible with proper tuning the motherboard is a DELL and it has twin redundant PSU (870watt 85%eff) its running on Intel Xeon 5502 (Quad Core) x2 so about 8 physical proc (fairly share) is there any ruler to measure for this about one VPS can only install what what what service ? because of my resource is limited =.@ may i know if it is install in this way,maybe it seem like defeat the way of "VPS"... what will happen ? or any guideline on this issue (fully configuring the window server 2008 R2) ? Thx for reply

  Read the article

• Disabling CPU management

  - by Tiffany Walker

  If I add the following processor.max_cstate=0 to the kernel command line for boot up, does that disable all CPU power management and throttling? I also found: http://www.experts-exchange.com/OS/Linux/Administration/A_3492-Avoiding-CPU-speed-scaling-in-modern-Linux-distributions-Running-CPU-at-full-speed-Tips.html The link talks of Change CPU governor from 'ondemand' to 'performance' for all CPUs/cores and disabling kondemand from kernel. Server is for web hosting UPDATES: 2.6.32-379.1.1.lve1.1.7.6.el6.x86_64 #1 SMP Sat Aug 4 09:56:37 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux . # dmidecode 2.11 SMBIOS 2.6 present. 74 structures occupying 2878 bytes. Table at 0x0009F000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 1.0c Release Date: 05/27/2010 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: ISA is supported PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.16 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: 0123456789 UUID: 49434D53-0200-9033-2500-33902500D52C Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: VM11S61561 Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Supermicro Type: Sealed-case PC Lock: Not Present Version: 0123456789 Serial Number: 0123456789 Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0

  Read the article

• Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

  - by Jeff

  I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

  Read the article

• How powerful of a PC do you need to edit HD videos?

  - by Xeoncross

  I have a Core2Quad Q8200 (2.3GHz) with 4GB of RAM, a 512MB PCIe video card, and a SATA-2 HD. Yet it still isn't fast enough to edit 720i/p video in Sony Vegas or Adobe Premiere/Aftereffects. My RAM usage never peaks over 1.6GB, but my CPU cores make it to 95% quick! Right now the preview panes in all these programs lag to bad to actually work on the videos. I get to see 1-3 frames every second or two! So how fast do I have to go? At what point will my CPU be fast enough to actually edit these videos? I have to assume that regular people and their regular sub $2k computers can actually work with this footage. Another way to answer this is, how fast is the PC you used to edit videos? Update: I'ts worth noting that now that I have Adobe Pre/AF CS4 I am more interested in getting that working than my older Vegas 6. If you didn't have to re-run RAM preview every, single, time you made one change it would be my answer. But since I like to test many filters and effects before choosing one - I have to re-render a 1-sec section of footage over-and-over and it drives me nuts waiting. Perhaps a motherboard with Dual Xeon chips or something would be able to handle this. It would probably be as much as a dual-crossfire setup and would also speed up other applications.

  Read the article

• Multiple public IPs through DD-WRT without 1-to-1 NAT

  - by Stephen Touset

  I've done a search here and wasn't able to find anything relevant to my situation. I apologize in advance if I've missed an existing post on the topic. Our ISP has provided us with 6 static IP addresses. We are currently using two of them (plus one for the Comcast-provided router). One of the static addresses routes to our internal network, and the other goes to our VOIP phone system. Unfortunately, the Comcast machine doesn't support QoS, so our VOIP calls have been choppy. We plan to put the Comcast-provided router into bridge mode and replace it with an ASUS RT-N16 running DD-WRT. However, I'm unsure how to set up DD-WRT to function similarly to our existing Comcast router. The Comcast router's WAN IP is the first of our static IP addresses. We did not need to provide an internal LAN IP address — simply connecting machines that use our other public addresses to the LAN ports on the Comcast router is enough for it to route between the connected machines and our internet connection. Is there a way to do a similar setup through the DD-WRT? Thanks in advance.

  Read the article

• Acer Laptop does not power up after repairing DC power jack

  - by Misbah Mashkoor

  I have an Acer travelmate laptop which (by mistake) I dropped on the floor with the power jack side down, with the charger connected and it broke the DC jack from the inside of the laptop. Then I unscrewed the laptop and soldered the DC jack back and then plugged it in and switched on the laptop without the batteries. It did switch on, that was before screwing everything back. Then after assembling the whole thing back it does not power up. So I disassembled it again and just took the part which contained the DC jack (My laptop is like in two parts one contains the power jack which then sits on some pins on the main PCB) to a technician and he said that if you had connected this to a motherboard then it would have burnt cause the soldering was not right. And then I checked with my laptop again by connecting everything the light (the charging light) comes on when I connect the power but it does not switch on. Right now nothing is connected to the laptop; no HD, CD ROM, RAM , Battery. Nothing! Even then it does not power up. Any suggestions?

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine?

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Raid-1 Western Digital Green AARS, cloning and WD Align Utility

  - by Jaguar

  Hello all, My current setup runs on top of 2x Western Digital 2500KS drives on Raid-1, using the motherboard's 780G raid controller, on WinXP. Everything is fine, but the drives are a bit noisy. I am considering buying 2x WD6400AARS disks which are the 640GB slower 'green' drives, but also feature the Advanced Formatting 4KB sectors. This means that for WinXP the partition will have to be aligned to work properly, else there is a performance penalty. There are 2 questions here: The Green drives from WD are all slower and are (according to WD) susceptible to drop-out's from the controller. Has anyone any experience in this matter? Is there a possibility the controller will drop a drive? If so, can i do anything about it? Secondly, western digital gives a utility to perform the alignment on the partition. The thing is, will the utility see the drives in question as the operating system only sees 1 logical disk? I will be making the transition using a cloning tool (most probably norton ghost) unless i don't find a solution or a clear answer, in which case i'll just buy a win 7 license and make a clean install... thx in advance

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >