Search Results

Search found 2181 results on 88 pages for 'wifi cordon'.

Page 81/88 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Locate devices within a building

  - by ams0

  The situation: Our company is spread between two floors in a building. Every employee has a laptop (macbook Air or MacbookPro) and an iPhone. We have static DHCP mappings and DNS resolution so every mobile gets a name like employeeiphone.example.com, every macbook air gets a employeelaptop.example.com and every macbook pro gets a employeelaptop.example.com on the Ethernet interface (the wifi gets a dynamic IP from a small range dedicated for the purpose). We know each and every MAC address of phones and laptops, since we do DHCP static mapping (ISC DHCP server runs on linux). At each floor we have a Netgear stack of two switches, connected via 10GB fiber to each other. No VLANs so far. At every floor there are 4 Airport Extreme making a single SSID network with WPA2 authentication. The request: Our CTO wants to know who is present at which floor. My solution (so far): Every switch contains an table listing MAC address and originating port. On each switch stack, all the MAC addresses coming from the other floor are listed as coming on port 48 (the fiber link). So I came up with: 1) Get the table from each switch via SNMP 2) Filter out the ones associated with port 48 3) Grep dhcpd.conf, removing all entries not *laptop and not *iphone 4) Match the two lists for each switch, output in JSON or XML 5) present the results on a dashboard for all to see I wrote it in bash with a lot of awk and sed, it kinda works but I always have for some reason stale entries in the switch lookup tables, making it unreliable; some people may have put their laptop to sleep, their iphones drop connections after a while, if not woken up and so on..I searched left and right, we are prepared to spend a little on the project too (RFIDs?), does anybody do something similar? I can provide with the script if needed (although it's really specific to our switches and naming scheme). Thanks! p.s. perhaps is this a question for stackoverflow? please move if it so.

  Read the article

• Does cloud computing offer this? [closed]

  - by TheBlackBenzKid

  I have some newb questions I want answering please about cloud hosting - we are currently looking at Rackspace and getting a windows box. This is the situation: We have 15 computers in our office. We have 3 printers, some wifi and some network plugged. We have a standard router and the office share things via dropbox. The computers are not on Windows SBS or something similar. We want a cloud hosting solution that will offer User can login on any machine in the office and see the machine software User can login on any machine in the office and open Outlook and their emails and signature will be on exchange automatically A shared company folder on the network All printers automatically installed on the network Users can login remotely to access emails via the web At the moment we have a network company saying we need Xeon server in house with backup and psu and Windows SBS with license for each machine and also we need cabinets and cabling setup and also load balancers and modification of our DNS for emails. My question is this. Can cloud offer this? Can we have a server in the cloud that does this? Is it possible I mean the computers would be wireless connected to this cloud and you turn the machine on and its hosted?

  Read the article

• Connection reset to some websites

  - by user143271

  I'm using a 2wire 3600HGV modem/router. Starting around this afternoon, any time I try to access anything from i.imgur.com I get The connection to i.imgur.com was interrupted in chrome, and the actual error is Error 101 (net::ERR_CONNECTION_RESET). It's network wide (tested multiple browsers on multiple computers and phones). I can access imgur.com just fine, but nothing from its content server i.imgur.com. If I disable wifi on my phone and use its 4G connection, I can access it just fine, so obviously imgur isn't down. I haven't changed any configuration on the router, and I have tried changing DNS servers (I tried google and OpenDNS). It also seems that imgur is not the only site; howtogeek and a couple of others seem to have the same problem. It looks like they are all edgecast cdn content servers, but not all edgecast cdn servers fail. Tumblr, for instance, works just fine. Does anyone have any idea what would be causing this? EDIT: Related to the edgecast remark, it would appear that this is a specific edgecast server: gs1.wpc.edgecastcdn.net. Tumbler's content is on gs1.wac.edgecastcdn.net, so it might be on a different server. Edit #2: These sites all respond to ping just fine as well.

  Read the article

• PPTP VPN on Server 2008 Enterprise

  - by Mike K

  I asked this question on Server fault and was told that was not allowed so im moving it here. I am running Windows Server 2008 enterprise in my HOME network inside of vmware workstation. I am running this on my home network to setup a PPTP VPN connection at home. I have correctly setup everything I needed to make it work, including opening all the ports, 1723 and 43 (GRE). I am able to connect just fine, but when I connect I dont have internet unless I uncheck use remote gateway. The thing is, I want to use the remote gateway to route all my traffic through that connection. Can someone tell me why this isnt working and how to get it to work. When I have remote gateway checked, and I do an ipconfig I dont get a remote gateway for the VPN connection, its 0.0.0.0 when id assume if connected properly should be 192.168.1.254 (my ATT Home Router). Also, if I cant get the remote gateway issue to work, and I have to uncheck that box to get internet, does this mean my VPN session is no longer encrypted? I am fully aware the PPTP VPN is the weakest VPN encryption out there but still having that extra layer of security when im on an unsecure wifi connection makes me feel a bit better. Thank you for all your help in advance. Someone told me I need to setup a gateway or router configured on the server. If thats the case, how go I go about telling the remote co

  Read the article

• Y560 Lenovo IdeaPad bandwidth issue

  - by Vlakarados

  I have a Y560 Lenovo IdeaPad, my config: i7 740QM, 4GB RAM, RADEON HD 6570m/5700 1024MB and my network adapter is Intel WIFI Link 5150. The laptop is 2 years old and the problem I'm about to describe is present from the first day. As may be seen here, the receive bandwidth should be up to 300 Mbps, but the maximum download speed from LAN and using torrents is about 2.4MB/s. My internet connection is 100Mbps and other laptops in my house have the appropriate download speed - up to 12MB/s, I have tested at my friends house and at my job, the speed remains the same. I have tried all possible configurations I could think of in network settings - nothing helps. I use Windows 7 and I have had installed different versions (Ultimate, Professional, Home, OEM Home, 64 and 32 bit versions). Some time ago I searched for the problem and found one or two threads that had the same problem and there were something said about a limitation in firmware that some experienced users have managed to bypass. Updating drivers didn't help me either. Is there any reliable way to fix this?

  Read the article

• Configuring two subnets with two NICS. Access from a NAS to the internet

  - by archipestre

  I am having trouble configuring my NAS. I have a DSL router with WIFI (192.168.1.1) in my flatmates room. In my room I have a server with two NICS: 1) wlan0 (192.168.1.2) that connects to the DSL router via wireless 2) em1 (192.168.0.1) that connects to the NAS (192.168.0.20) with a crossover cable. I have Fedora 17 and I have enable packet forwarding. My IP configuration is as follows: WLAN0 inet 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255 EM1 inet 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 My routing table looks like: Destination Gateway G enmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 em1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 I have enable a static route in the DSL server: Status Network Destination Subnet Mask Interface Gateway Remove Edit Active 192.168.0.0 255.255.255.0 LAN 192.168.1.2 From my server I can ping the DSL router and the NAS. From the NAS I can ping both NICS of the server. However the NAS is unable to ping the DSL router or any address in the Internet. Any idea of what is wrong. Thank you in advance

  Read the article

• I'm having trouble getting my server to appear online.

  - by JMRboosties

  Total newb question I'm sure. First I had installed WAMP (http://www.wampserver.com), and I was able to access my pages from other computers in my router network, and the virtual device used to debug Android programs (the purpose of my having a server). This functionality failed, however, at some point over these past few days. While my own browser displays the pages just fine, other computers, my Android phone (on our room's wifi), and my virtual device are no longer able to connect to my pages. I had not made any changes in the settings. I uninstalled WAMP and installed EasyPHP. However, the problem was not resolved. I know this is rather vague, but does anyone here have an idea of what may have happened? I forwarded both port 80 (I know its the default HTTP port, I did it just to be safe), and now port 8888 which EasyPHP uses. I turned my firewall on my hosting computer off for good measure. I cannot access my pages from neither remote computers or computers using my router. Any ideas you may have on how to resolve this would be awesome, thanks a lot. And if you need anymore info please tell me.

  Read the article

• Network using only switches

  - by mschultz

  So I'm not a network guy - but here's what I want to do - I have an existing network using wifi, which I like, and which is used to connect several computers to the internet. It is headed up by a router, which is in another part of the building. Three of those computers are in my office. All three have gigabit wired ethernet. I have a gigabit switch. Here's what I want to do: Build a 2nd network, out of just that switch, which allows all 3 computers to connect to each other (just to each other is fine, for this purpose, they need no internet). I have a distributed computing task (rendering high-quality fractal artwork, as it were), that requires the best connection speed to all 3 computers. I want them to be able to "talk to each other" as quickly as possible, with the fewest dropped packets (the dataflow over this network will be quite high). So how do I do this. I'm not a networking guy at all - I tried connecting them all, and nobody got an IP address (which I assume is because nobody is running a DNS server?). What all do I need to do to make this work? PS - two are running windows, one is running ubuntu.

  Read the article

• Wireless internet is connected to an open network but has no internet

  - by Joshua Reeder

  I just installed Ubuntu on my laptop yesterday and it connected to the wireless fine. Then I took it to school, put it on their wired connection, downloaded some stuff, and now the wireless doesn't work. At first it would detect networks, but not connect. I restarted it and now it can connect, but it acts like it doesn't have internet in the browser. Wired connection still works fine on it. I know it isn't the network because my ipad is working on the wireless connection fine. I found another solution on here switching the security settings for the wireless, but this is the apartment's wireless so they have it open, and I won't be able to mess with it at all. Here is lspci output: 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) 00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11) 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11) 00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11) 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11) 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11) 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 310M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 07:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) 16:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 20) 16:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 20) 16:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 20) 16:00.4 System peripheral: JMicron Technology Corp. xD Host Controller (rev 20) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04) ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04) ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04) ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04) ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04) ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04) ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04) ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04) ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04) ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04) ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04) ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04) Update: I re-installed Ubuntu 12.04 (I assumed I messed something up while toying with it) but it did not solve the problem. Eventually, I got it to work with my school's wireless internet (the default network settings were wrong), but the internet still doesn't work on my apartment's wifi (it has no security on it).

  Read the article

• Bluetooth not found on BCM43228

  - by TK Kocheran

  I've got a Broadcom BCM43228 mPCIe card which came with my motherboard (ASUS ROG Maximus V Extreme, can't seem to find a link to what the card is) which is working great for WiFi right now, but I can't detect the Bluetooth hardware onboard. In Windows, I have full Bluetooth 4.0 support. $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1c.6 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 7 (rev c4) 00:1c.7 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 8 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1189 (rev a1) 01:00.1 Audio device: NVIDIA Corporation Device 0e0a (rev a1) 0d:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 0e:00.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:01.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:04.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:05.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:06.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:07.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:08.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0f:09.0 PCI bridge: PLX Technology, Inc. PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 10:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 12:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n 17:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01) The key line seems to be: 15:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n If I try to detect the Bluetooth card, I don't see anything: $ hcitool dev Devices: rfkill list all: Output lspci: Output lsusb: Output I finally found the card with usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0b05 ProdID=17b5 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=############ C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) I've heard that this card needs to have firmware injected into it in order to function. If that's the case, how do I do it?

  Read the article

• BlueTooth not working on my HP Probook 4720s

  - by mtrento

  the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Healthcare and Distributed Data Don't Mix

  - by [email protected]

  How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

  Read the article

• A problem with conky in Gnome 3.4 [closed]

  - by Pranit Bauva

  Possible Duplicate: Conky not working in Gnome 3.4 My conky in Gnome 3.4 is not working. When I run a conky script nothing appears but the process is running. Please also see the debug code : pungi-man@pungi-man:~$ sh conky_startup.sh Conky: forked to background, pid is 3157 Conky: desktop window (c00023) is subwindow of root window (aa) Conky: window type - override Conky: drawing to created window (0x2200001) Conky: drawing to double buffer My conky script is : background yes update_interval 1 cpu_avg_samples 2 net_avg_samples 2 temperature_unit celsius double_buffer yes no_buffers yes text_buffer_size 2048 gap_x 10 gap_y 30 minimum_size 190 450 maximum_width 190 own_window yes own_window_type override own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 alignment tr draw_shades no draw_outline no draw_borders no draw_graph_borders no override_utf8_locale yes use_xft yes xftfont caviar dreams:size=8 xftalpha 0.5 uppercase no default_color FFFFFF color1 DDDDDD color2 AAAAAA color3 888888 color4 666666 lua_load /home/pungi-man/.conky/conky_grey.lua lua_draw_hook_post main TEXT ${voffset 35} ${goto 95}${color4}${font ubuntu:size=22}${time %e}${color1}${offset -50}${font ubuntu:size=10}${time %A} ${goto 85}${color2}${voffset -2}${font ubuntu:size=9}${time %b}${voffset -2} ${color3}${font ubuntu:size=12}${time %Y}${font} ${voffset 80} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}CPU ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top name 1}${alignr}${top cpu 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top name 2}${alignr}${top cpu 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top name 3}${alignr}${top cpu 3}% ${goto 90}${cpugraph 10,100 666666 666666} ${goto 90}${voffset -10}${font Ubuntu:size=7,weight:normal}${color}${threads} process ${voffset 20} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}MEM ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top_mem name 1} ${alignr}${top_mem mem 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top_mem name 2} ${alignr}${top_mem mem 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top_mem name 3} ${alignr}${top_mem mem 3}% ${voffset 15} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}DISKS ${goto 90}${diskiograph 30,100 666666 666666}${voffset -30} ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /home} /home ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /} / ${voffset 10} ${goto 70}${font Ubuntu:size=18,weight:bold}${color3}NET${alignr}${color2}${font Ubuntu:size=7,weight:bold}${color1}${if_up eth0}eth ${addr eth0} ${endif}${if_up wlan0}wifi ${addr wlan0}${endif} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}open ports: ${alignr}${color2}${tcp_portmon 1 65535 count} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}${offset 10}IP${alignr}DPORT ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 0}${alignr 1}${tcp_portmon 1 65535 rport 0} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 1}${alignr 1}${tcp_portmon 1 65535 rport 1} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 2}${alignr 1}${tcp_portmon 1 65535 rport 2} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 3}${alignr 1}${tcp_portmon 1 65535 rport 3} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 4}${alignr 1}${tcp_portmon 1 65535 rport 4} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 5}${alignr 1}${tcp_portmon 1 65535 rport 5} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 6}${alignr 1}${tcp_portmon 1 65535 rport 6} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 7}${alignr 1}${tcp_portmon 1 65535 rport 7} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 8}${alignr 1}${tcp_portmon 1 65535 rport 8} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 9}${alignr 1}${tcp_portmon 1 65535 rport 9} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 10}${alignr 1}${tcp_portmon 1 65535 rport 10} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 11}${alignr 1}${tcp_portmon 1 65535 rport 11} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 12}${alignr 1}${tcp_portmon 1 65535 rport 12} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 13}${alignr 1}${tcp_portmon 1 65535 rport 13} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 14}${alignr 1}${tcp_portmon 1 65535 rport 14} This script works fine with unity but faces problems in gnome 3.4 Can anyone please sort it out?

  Read the article

• Microsoft Cloud Day - the ups and downs

  - by Charles Young

  The term ‘cloud’ can sometimes obscure the obvious.  Today’s Microsoft Cloud Day conference in London provided a good example.  Scott Guthrie was halfway through what was an excellent keynote when he lost network connectivity.  This proved very disruptive to his presentation which centred on a series of demonstrations of the Azure platform in action.  Great efforts were made to find a solution, but no quick fix presented itself.  The venue’s IT facilities were dreadful – no WiFi, poor 3G reception (forget 4G…this is the UK) and, unbelievably, no-one on hand from the venue staff to help with infrastructure issues.  Eventually, after an unscheduled break, a solution was found and Scott managed to complete his demonstrations.  Further connectivity issues occurred during the day. I can say that the cause was prosaic.  A member of the venue staff had interfered with a patch board and inadvertently disconnected Scott Guthrie’s machine from the network by pulling out a cable. I need to state the obvious here.  If your PC is disconnected from the network it can’t communicate with other systems.  This could include a machine under someone’s desk, a mail server located down the hall, a server in the local data centre, an Internet search engine or even, heaven forbid, a role running on Azure. Inadvertently disconnecting a PC from the network does not imply a fundamental problem with the cloud or any specific cloud platform.  Some of the tweeted comments I’ve seen today are analogous to suggesting that, if you accidently unplug your microwave from the mains, this suggests some fundamental flaw with the electricity supply to your house.   This is poor reasoning, to say the least. As far as the conference was concerned, the connectivity issue in the keynote, coupled with some later problems in a couple of presentations, served to exaggerate the perception of poor organisation.   Software problems encountered before the conference prevented the correct set-up of a smartphone app intended to convey agenda information to attendees.  Although some information was available via this app, the organisers decided to print out an agenda at the last moment.  Unfortunately, the agenda sheet did not convey enough information, and attendees were forced to approach conference staff through the day to clarify locations of the various presentations. Despite these problems, the overwhelming feedback from conference attendees was very positive.  There was a real sense of excitement in the morning keynote.  For many, this was their first sight of new Azure features delivered in the ‘spring’ release.  The most common reaction I heard was amazement and appreciation that Azure’s new IaaS features deliver built-in template support for several flavours of Linux from day one.  This coupled with open source SDKs and several presentations on Azure’s support for Java, node.js, PHP, MongoDB and Hadoop served to communicate that the Azure platform is maturing quickly.  The new virtual network capabilities also surprised many attendees, and the much improved portal experience went down very well. So, despite some very irritating and disruptive problems, the event served its purpose well, communicating the breadth and depth of the newly upgraded Azure platform.  I enjoyed the day very much.

  Read the article

• Five geeky things you must do with your Android Smartphone

  - by Gopinath

  Android is the Windows of next generation. Its open, free, widely adopted and smart enough to outsmart Apple’s iOS. It’s a stolen product and cheap imitation of iOS, but Steve Job’s once quoted saying good artists copy and great artists steal. Alright, this post is not about Android vs iOS or is it really stolen or not. Android is a great OS for mobile devices and it lets you do amazing through mobiles.  In this post I want to write about the geeky things we can do with an Android Smartphone. Control your computer using mobile Assume that it is a lazy weekend and you are on a couch watching movies on a laptop which is a meter away. Now you want to adjust volume or skip a scene/song. How to control your laptop without moving out of couch? Just install Universal Remote free app on your smartphone and start control your computer using phone. Universal Remove app controls computers over Wifi or Bluetooth networks with dedicated remote controls for various media players and applications like YouTube, VLC & Spotify.  The application is very easy to use and works amazingly well in controlling computers. Few of the remote controls provided in the app are – Mouse, Keyboard, Media Controls, Power, Start, Windows Media Player, VLC Player,  YouTube. There is also paid version of this app with additional remotes, but for most of the users Free version is good enough. Stream YouTube videos playing on you mobile to computer You can stream YouTube videos playing on your mobile to computer/smart tv. This is something similar to Apple’s most popular AirPlay feature, but works only with YouTube videos. To start streaming videos install Google’s YouTube Remote on your smartphone, open youtube.com/leanback on your computer  and pair up mobile with computer. Once the pairing is done, videos played on YouTube Remote app will be streamed on to your computer. Access your mobile using any web browser – send/receive SMS, view photos/call logs, etc. Want to control your mobile phone using a computer? Install AirDroid app on your phone and start controlling your phone using computer browser – send and receive messages, view call logs, play music, upload/download files, edit contacts and many more. At times it’s lot of fun to access mobile using a big screen devices like laptops. Launch a webpage on your mobile browser using your computer With Google Chrome to Phone installed on your computer and mobile, you can send links and other information from Chrome browser to your Android device. With a click on Chrome browser, the current webpage of Chrome browser will be automatically launched on Android device. This is very handy when you want to send links, send driving direction to mobile using Google Maps and launch phone dialer with number selected on webpage. Install Apps on mobile using computer To install apps on your smartphone you really don’t need to touch it. Open any web browser, sing in to Google Play with your Google id that is associated with smartphone and start installing apps on to your phone right from the browser. As you browse apps on Google Play store, you find Install button and all you need to do is to just click Install. Google will automatically installs app on your mobile within few seconds.

  Read the article

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• Thoughts on ODTUG Kscope12

  - by thatjeffsmith

  The rodeo rocked! This wasn’t my first rodeo, and it wasn’t my first Kscope, but it was probably my favorite one. What is Kscope? It’s the annual conference for the Oracle Development Tools User Group. 1,000+ attendees from 20+ countries with an average Jeff Klout score of 65. I just made that metric and score up, but this conference attracts the best and brightest in the Oracle database space. I’m not just talking about the speakers either. The attendees are all top notch. They actively participate in sessions, make an effort to get to know their fellow conference mates, and often turn into volunteers and speakers. Developers that enjoy unit testing, understand the importance of modeling your data, and are eager to understand the Oracle CBO – these are traits that describe the ‘average’ ODTUG developer. 2012′s event was held in San Antonio. Yes, it was very hot. But this might have been the nicest Marriott property I’ve ever visited, and I’ve stayed at some nice ones in Hawaii and St. Thomas. They had free WiFi everywhere – the rooms, the Conference Center, the lobby, bars, everywhere. And it worked. The after hours events were very fun. I embarrassed myself several times, but that’s OK. The rodeo was an awesome event and the Thirsty Games experience was something I hope does not make it onto YouTube or Facebook — talking to you Chet Justice. I finally got to meet and spend some time with some folks I’ve always wanted to get to know better, @timothyjgorman, @alexgorbachev, @lj_dobson, @dschleis, @kentGraziano, @chriscmuir, @GaloBalda, @patch72, and many, many more! I even made some new friends thanks to the Mentor program and @carol_finn. 2013′s event will be in New Orleans. If you haven’t joined ODTUG or haven’t made it to Kscope, go ahead and mark your calendars. I had 3 presentations this year. Sunday’s was not a good performance, and I want to apologize to anyone who was there and was hoping for more. My Tips and Debugging sessions on Monday and Tuesday were more to my liking, and I enjoyed them as a presenter. I hope you enjoyed them as an attendee. I understand that my slidedecks were corrupted on the ODTUG site, and I’m working with the coordinator now to get those fixed ASAP. Apparently the 2 most well-received Tips was the /*CSV*/ formatting hint and recalling your previous SQL history via the keyboard. I’ll be doing a follow-up webinar with ODTUG in a few weeks for those members that weren’t able to see my Tips and Debugger sessions in San Antonio. I’ll be sure to post details on that here when I have the details. My next scheduled conference is Oracle Open World, and I may have a couple of shows after that to round out 2012.

  Read the article

• 2013 Predictions for Retail

  - by David Dorf

  Its that time of year to roll out the predictions for next year.  I can't say I've really nailed it in the past, but feel free to look back at my 2012, 2011, and 2010 predictions.  I'm not expecting anything earth-shattering this year; just continued maturation of several technologies that are finally taking hold. 1. Next day delivery -- Amazon finally decided it wasn't worth fighting state taxes and instead decided to place distribution centers everywhere so they can potentially offer next-day deliveries.  Not to be outdone, Walmart is looking to leverage its huge physical presence to offer the same.  Clubs like ShopRunner are pushing delivery barriers as well, so the norm is shifting to free shipping in a few days or relatively cheap shipping overnight.  Retailers need be thinking about how to ship from physical stores. 2. Bring your own device -- Earlier this year Intuit bought AisleBuyer, a mobile self-checkout start-up, at least somewhat validating the BYOD approach.  Grocery stores, especially in Europe, have been supporting in-aisle self-scanning for a while and I'm betting it will find a home in certain verticals in the US too.  There's also the BYOD concept for employees.  Some retailers are considering issuing mobile devices at hiring along side the shirt and name-tag.  Employees become responsible for the hardware until they leave. 3. TV shopping -- Will Apple finally release a TV product in 2013?  Who knows?  But the industry isn't standing still. Companies like QVC and HSN are already successfully combining the TV and online experiences for shopping.  Comcast is partnering with Tivo to allow viewers to interact with ads with Paypal handing payment.  This will be a slow maturation, but expect TVs to get smarter and eventually become a new selling channel (pun intended) for retailers. 4. Privacy backlash -- It only takes one big incident to stir the public, and I'm betting we have one in 2013.  Facebook, Google, or Apple will test the boundaries of what the public is willing to accept.  It could involve a retailer using geo-location technology, or possibly video analytics.  And as is always the case, the offender will apologize, temporarily remove the technology, and wait 2-3 years for it to be generally accepted.  Privacy is a moving target. 5. More NFC -- I've come to the conclusion that adoption of any banking technology is going to be slow.  It was slow for credit cards, ATMs, and online billpay so why should it be any different for NFC?  Maybe, just maybe the iPhone 5S will have an NFC chip, but we're not going to see mainstream uptake for years.  Next year we'll continue to see incremental improvements from Isis, Google, and Paypal and a plethora of new startups, but don't toss your magstripe cards just yet. 6. In-store location -- The technologies for tracking people inside stores is really improving.  Retailers can track people using video cameras, infrared, and by the WiFi radios in mobile phones.  We're getting closer to the point where accuracy could be a shelf-facing, which will help retailers understand how people shop, where they spend time, and what displays attract them.  Expect CPG companies to get involved and partner with retailers, since the data benefits both parties.  Consumers will benefit by being directed right to the products they seek.  (In 2013 ARTS is forming a workteam to develop new standards in this area.) 7. M&A -- Looking back at 2012 there were some really big deals involving IBM, Oracle, JDA, and NCR and I expect that trend will likely continue as vendors add assets to bolster their portfolios.  Many retailers are due for an IT transformation to support anywhere, anytime shoppers, and one-stop-vendors can minimize complexity and costs. Predictions from other sources: Independent Retailer Stores Magazine IDC Insights Mobile Commerce Daily

  Read the article

• Review&ndash;Build Android and iOS apps in Visual Studio with Nomad

  - by Bill Osuch

  Nomad is a Visual Studio extension that allows you build apps for both Android and iOS platforms in Visual Studio using HTML5. There is no need to switch between .Net, Java and Objective-C to target different platforms - write your code once in HTML5 and build for all common mobile platforms and tablets. You have access to the native hardware functions (such as camera and GPS) through the PhoneGap library, UI libraries such as jQuery mobile allow you to create an impressive UI with minimal work. Nomad is still in an early access beta stage, so the documentation is a bit sparse. In fact, the only documentation is a simple series of steps on how to install the plug-in, set up a project, build and deploy it. You're going to want to be a least a little familiar with the PhoneGap library and jQuery mobile to really tap into the power of this. The sample project included with the download shows you just how simple it is to create projects in Visual Studio. The sample solution comes with an index.html file containing the HTML5 code, the Cordova (PhoneGap) library, jQuery libraries, and a JQuery style sheet: The html file is pretty straightforward. If you haven't experimented with JQuery mobile before, some of the attributes (such as data-role) might be new to you, but some quick Googling will fill in everything you need to know. The first part of the file builds a simple (but attractive) list with some links in it: The second part of the file is where things get interesting and it taps into the PhoneGap library. For instance, it gets the geolocation position by calling position.coords.latitude and position.coords.longitude: ...and then displays it in a simple span: Building is pretty simple, at least for Android (I'm not an iOS developer so I didn't look at that feature) - just configure the display name, version number, and package ID. There's no need to specify Android version; Nomad supports 2.2 and later. Enter these bits of information, click the new "Build for Android" button (not the regular Visual Studio Build link...) and you get a dialog box saying that your code is being built by their cloud build service (so no building while away from a WiFi signal apparently). After a couple minutes you wind up with a .apk file that can be copied over to your device. Applications built with Nomad for Android currently use a temporary certificate, so you can test the app on your devices but you cannot publish them in the Google Play Store (yet). And I love the "success" dialog box: Since Nomad is still in Beta, no pricing plans have been announced yet, so I'll be curious to see if this becomes a cost-effective solution to mobile app development. If it is, I may even be tempted to spring for the $99 iOS membership fee! In the meantime, I plan to work on porting some of my apps over to it and seeing how they work. My only quibble at this time is the lack of a centralized documentation location - I'd like to at least see which (if any) features of JQuery and PhoneGap are limited or not supported. Also, some notes on targeting different Android screen sizes would be nice, but it's relatively easy to find jQuery examples out on the InterWebs. Oh well, trial and error! You can download the Nomad extension for Visual Studio by going to their web site: www.vsnomad.com. Technorati Tags: Android, Nomad

  Read the article

• Security and the Mobile Workforce

  - by tobyehatch

  Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things.  With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores.  Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN.  Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured.  To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click  here To learn more about the BI Mobile Security Toolkit, click here 

  Read the article

• History of Mobile Technology

  - by David Dorf

  Over the last ten years, mobile phones have gone through several incremental technology leaps that have added capabilities that impact the retail industry.  I've listed the six major ones below, along with their long-lasting impact. 1. Location In the US, the FCC required mobile phones to implement E911 (emergency calls) by 2006, requiring the caller to be located to within 300 meters.  Back in 2000, GPS was opened up for civilian use, and by 2004 Qualcomm had figured out how to use GPS in mobile phones.  So mobile operators moved from cell tower triangulation to GPS, principally for E911.  But then lots of other uses became apparent, especially navigation.  The earliest mobile apps from retailers made it easy to find nearby stores, and companies are looking at ways to use WiFi triangulation inside stores. 2. Computer Vision In 1997 Philippe Kahn shared a photo of his newborn using a mobile phone thus launching the popularity of instant visual communications.  Over the years the quality of the cameras got better, reaching the point where barcodes could be read around 2008.  That's when Occipital came on the scene with their Red Laser application, which was eventually acquired by eBay.  This opened up the ability for consumers to easily price compare inside stores.  Other interesting apps included Tesco's Wine Finder and Amazon's Price Checker, both allowing products to be identified by picture. 3. Augmented Reality Once the mobile phone had GPS, a video camera, and compass functionality it was suddenly possible to overlay digital information on the screen in real-time.  Yelp, which was using GPS to find nearby merchants, created a backdoor called Monocle on the iPhone that showed nearby merchants overlayed on the video camera view.  Today AR apps are mostly used by retailers for marketing, like Moosejaw's app that undresses models in their catalog. 4. Geo-Fencing So if we're able to track the location of a mobile phone, why not use that context to offer timely information?  My first experience with geo-fencing came courtesy of North Face, the outdoor enthusiast store. When a mobile phone enters a predetermined area, like near a store, a text message is sent to phone with an offer or useful information.  Of course retailers can geo-fence their competitors as well and find out which customers are aren't so loyal. 5. Digital Wallet Mobile payments leverage different technologies such as NFC, QRCodes, bluetooth, and SMS to facilitate communication between the consumers's phone and the retailer's point-of-sale. The key here is the potential to consolidate loyalty cards, coupons, and bank cards into the mobile phone and enable faster checkout.  Nobody does this better than Starbucks today, but McDonald's and Duncan Donuts aren't far behind.  Google, Isis, Paypal, Square, and MCX are all vying for leadership in this area.  If NFC does finally take off, it will be leveraged by retailers in more places than just the POS. 6. Voice Response Mobile Phones have had the ability to interpret simple voice commands for a while, but Google and Amazon were the first to use voice to allow searches for products.  Allowing searches by text, barcode, and voice makes it easy to comparison shop in the aisles.  Walmart even uses voice to build shopping lists, and if the Siri API is even opened we could see lots more innovation in this area.

  Read the article

• Artec TV18R Tuner not working :(

  - by Antillar Maximus

  Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

  Read the article

• Wireless doesn't work on a Broadcom BCM4312

  - by Boderick

  As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• Wireless cycling between connected and disconnected

  - by Tony Kilgore

  My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

  Read the article

• Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

  - by Jackson Taylor

  I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >