Search Results

Search found 4070 results on 163 pages for 'intel centrino'.

Page 83/163 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • Which is a better use of my SSD Drive [on hold]

    - by RS Conley
    I have the choice of setting up a system with two SSD Drives in Raid 1 mode as my boot drive for Windows 7 64-bit. With the Program Files and User Folders moved to a Second regular HD Drive also configured using Raid 1. Or Setup a single SSD Drive (120 GB or 256 gb) as a cache Drive using Intel Rapid Storage Technology combined with two normal hard drives configured as Raid 1. Which setup would have the faster hard drive performance over the life of the computer?

    Read the article

  • Is it safe to have NVidia graphics always on on a Linux laptop, or do I risk overheating?

    - by codeape
    I'm getting a Lenovo T520 with two graphics cards: Integrated Intel HD 3000 Discrete NVidia NVS 4200M In BIOS, I can adjust which card(s) to use: Integrated only Discrete only Both (NVidia optimus) Since optimus is not well supported under Linux, I wonder if it is OK to set up the system to use the NVidia card all the time. I have read somewhere that a laptop risks overheating if using a discrete graphics card all the time. Is this true? Does someone have any experience to share?

    Read the article

  • How should I use my new SSD drive?

    - by jasondavis
    I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

    Read the article

  • Tool for logging NIC link state events.

    - by Alan B
    Intel NICs have a driver option (in Windows) that will log link state events to the system log, so if the network drops out periodically you can determine that fact. Does anyone know of a simple generic solution that does this, in other words one that is not part of the driver from a particular manufacturer? I know there are plenty of 'big iron' network monitoring tools out there but surely there's something really simple that runs as a service in Windows with minimal setup ? TIA

    Read the article

  • How to boot a Linux live USB on a Mac?

    - by nambuls
    I have a USB stick with a Fedora 11 live environment on it. It's booting fine on 3 PCs where I've tried it. But I can't get it to boot on a Mac (Intel). When pressing the alt key (or command key, I don't remember which one) during startup I can only choose the "Macintosh HD" and the USB stick doesn't appear.

    Read the article

  • lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

    - by bpetit
    Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

    Read the article

  • How can i set up email alerts for disk failures on a windows server 2012 box?

    - by Leo
    I have a windows 2012 server with 3 storage spaces set up, each containing a mirrored pair of 2TB drives. What is the best way to set up alerting so that i receive an alert when a physical disk fails? Ideally i would like these alerts to be sent via email to a pre-defined address. The current server set up is as follows: Intel Core i7 2600k 3.4GHz Socket 1155 8MB Cache Asrock H77 PRO4/MVP Socket 1155 VGA DVI HDMI 7.1 Channel Audio ATX Motherboard 16GB RAM 1 x 60GB SSD (OS) 6 x 2TB SATA III 7200 HDD (DATA)

    Read the article

  • high resolution on small screen size

    - by vishesh
    I have recently got an intel ultrabook,but its screen size is 13.3' and the native resolution is 1600X900.So the problem is that the letters that appear on screen are very small.Reducing resolution blurs the display and making everything bigger also doesn't feel very good.is there a way to get around this problem without changing hardware. I am even ok with this high resolution but I am concerned about the harmful effects it might have on my eyes in long term. Any advice will be very useful.Please help

    Read the article

  • How to temporary disable a mirror video driver in windows xp registry

    - by happy clicker
    Because its a lot of text, I will ask first my question and then explain what the base problem is. Perhaps someone can give me a solution to the base problem: Is there is a way to temporary disable mirror video drivers (through registry or so), without uninstalling the corresponding software. I tested changing the enumeration in LocalMachine\Hardware\DeviceMap\Video but after reboot always the old configuration is restored. Explanation of the base problem We are working on a wpf-project for a department of a big company. There we have the problem that WPF renders only in software mode, although the hardware they have, must support hardware rendering (Tier 2). After searching for a solution to the problem, we found out that direct 3d does not work properly and we think thats why WPF can only use SW-rendering. In dxdiag.exe the direct3d-acceleration is enabled, but if we start the test-routine it always fails saying that it has not enough memory (it says memory, not video memory!). I have seen there 3 different types of pc’s (they have some hundreds of each type) and every type shows the exactly same behavior. We tried to update all the drivers, also dx (Version 9.0c) and we searched a lot in the web but could not find a solution. All the pcs have Intel Dual-Core processors or better, one type has an Intel gma 9000 graphics card the other two types have actual ATI and NVidia graphic-cards with 256MB onboard memory. Also the system memory is at least 2GB. Windows is XPSP3. The pc’s are of two different manufacturers. Because we see the exactly same behavior on every computer of this three very different computer-types, we don’t think that this is a driver or a direct x problem. What we’ve found in other newsgroups is, that direct x could be disturbed through mirror-video drivers such as NetMeeting, VNC and other remote desktop-installations. In the registry, we see under LocalMachine\Hardware\DeviceMap\Video a lot of such mirror-entries and we find also the definitions in the CurrentControlSet\Control\Video-Section (However this drivers are not shown in the hardware panel of the os). We can have admin-rights to one of these computers to test if disabling these drivers would help, but we must not change the configuration so that some software does not work after the tests. Therefore I cannot uninstall any software because I have not the mediums, licenses or knowhow to reinstall those apps. The support of this company however will only begin to work, if I can tell them what the real problem is. Thats why we search for a way to disable these mirror-drivers (or a hint to solve the dx problem if we are on a false trace)

    Read the article

  • Is it possable to invert the image output on a computer for a rear projection screen?

    - by Faken
    Hello everyone, Is there a way to flip/invert/mirror a video out on a computer with a on board Intel video card? I'm making a large rear projection screen and i need to invert the image to project properly. One of my projectors has a function that automatically inverts the image, but the other one may or may not (likely not) and i need two projectors to drive the system so I'm hoping to do the inversion on the computer side before projecting.

    Read the article

  • Stopping windows changing colour scheme

    - by dave
    Windows keeps saying my computer is low on memory and changing the aero scheme to basic its really annoying I have 16gb of ram and 2 3gb 6970 gpu's i have no issues at all with anything expect from this my motherboard has a intel hd onboard gpu i think its something to do with this but all my settings are correct. Is there anyway to tell it not to change it without asking me or to tell it how much memory is too low its driving me mad.

    Read the article

  • Error message: sudo: mysql_secure_installation: command not found

    - by Craig
    I'm trying to learn PHP and I'm just in the process of installing apache,msql and PHP. I'm on a mac osx 10.7.2 Processor 2.26 GHz intel core 2 due I downloaded: mysql-5.5.18-osx10.6-x86_64.dmg I'm now at the point of setting the root password and when I type in: sudo: mysql_secure_installation it asks me to enter my password, then it says: sudo: mysql_secure_installation: command not found Any help would be appreciated. Thanks

    Read the article

  • Will this netbook allow me to run mutiple programs without issues?

    - by erik
    I'd like to use a netbook to run mIRC skype Messenger pretty much all at the same time. It this netbook a good choice? http://www.notebookzone.co.za/default/sony-vpc-w216.html Quick Overview Intel Atom N450 (1.66GHz), 2GB Ram /320GB HDD, 10.1" LCD-WXGA:1366 x 768, LED, Windows 7 Starter 32bit, Only 1.19Kg, Web Cam, Wireless, BT The combination of high-resolution wide 10.1" screen and Isolation Keyboard helps to put the Internet at your fingertips anytime you want it. Available in : white / pink / blue / brown

    Read the article

  • Alienware m15x (older model) BSOD investigation

    - by Crishu
    A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

    Read the article

  • Is it possible to install a discrete mobility card on a laptop without a graphics card already?

    - by JXPheonix
    To be specific: Can I: Install a discrete graphics card on a laptop that does not come with a discrete graphics card? Teach windows 8 to use the discrete card over the integrated graphics? To me this is the only downside of my laptop and I would not mind getting any graphics card as long as it is better than the integrated laptop card (an Intel 3000) The laptop if you need more information is an Asus U46E-BAL6.

    Read the article

  • How do I update the BIOS on my motherboard. Asus P8Z77-V LX

    - by neilh
    I recently built this new PC but I notice most games are not running as well as I had hopped, Tribes, Skyrim, Saints Row the Third and Serious Sam 3 for example. Some have really bad FPS like 60-30, dipping frequently. I notice my Motherboard has a lot of updates, I'm hoping this will help. CPU: Intel Core i5 3570K 3.4GHz | GPU: Radeon HD 6950 | Mobo: Asus P8Z77-V LX | RAM: Corsair 8GB (2x4GB) DDR3 1600MHz

    Read the article

  • List of all IBM server models with a certain socket?

    - by Ricket
    I just got a really good deal on two Intel Quad Core Xeon L5420 processors and I have access to other deals on bare IBM servers (case+motherboard, no processor/ram/hdd). How can I easily find out what server or motherboard models will be compatible with this processor? I am ideally looking for a dual-processor motherboard and I see that it is socket LGA771. So I guess the underlying question is, how can I find what IBM motherboards (and servers) have dual socket LGA 771?

    Read the article

  • How to use dedicated video card instead of onboard?

    - by Mathias Lykkegaard Lorenzen
    I tried running DxDiag (DirectX diagnostics), and I noticed that my graphics card is set to the onboard one that comes with the Core i5 processor (some Intel HD stuff). On my computer, I also have a dedicated graphics card (an Nvidia 310). No serious gaming stuff, I know - just for programming. However, I would still love to know how to switch to that dedicated graphics card instead. My laptop is an MSI CX720.

    Read the article

  • customize keyboard in hackintosh

    - by user36912
    i have Mac OS SL installed on intel machine. My shortcut keys for Home, End, Copy, Paste and Undo are not working. How can i customize keyboard so that i can get Copy by Ctrl+C, Paster by Ctrl+V, Undo by Ctrl+Z and so on..

    Read the article

  • How to turn off ATI adapter on Acer Timeline 4810G with ubuntu 9.10

    - by netimen
    I can't turn off my ATI adapter. I have applied the fix, but still lspci | grep VGA gives 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 01:00.0 VGA compatible controller: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] (rev ff) and my power consumption is about 15W (Wi-Fi on). I run ubuntu 9.10, kernel 2.6.31-14-generic. BIOS version 2.30

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >