Search Results

Search found 2886 results on 116 pages for 'behaviour'.

Page 85/116 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Router reporting failed admin login attempts from home server

  - by jeffora

  I recently noticed in the logs of my home router that it relatively regularly lists the following entry: [admin login failure] from source 192.168.0.160, Monday, June 20,2011 18:13:25 192.168.0.160 is the internal address of my home server, running Windows Home Server 2011. Is there anyway I can find out what specifically is trying to login to the router? Or is there some explanation for this behaviour? (not sure if this belongs here or on superuser...) [Update] I've run both Wireshark and netmon for a while on my home server. Wireshark captured the traffic, but didn't really show anything useful (or nothing I could make use of). A simple HTTP GET request is sent from the server (192.168.0.160) to the router (192.168.0.1), from a seemingly random port (I've seen examples from 50068, 52883), and it appears to do it twice in quick succession (incrementing port by 1), about every hour. Running netstat around the time of the failure didn't show anything (probably too long after anyway). I tried using netmon as it categorises by process, so I thought it might show a corresponding process for the port. Unfortunately, this comes in under the 'unknown' category, meaning it's basically just a slower, less useful Wireshark. I know there's not much to go on here, but does this help in anyway?

  Read the article

• GUI interfaces to ATI card behave weirdly out of the box and after updates.

  - by jdk

  My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

  Read the article

• Redirect 301 fails with a path as destination

  - by Martijn Heemels

  I'm using a large number of Redirect 301's which are suddenly failing on a new webserver. We're in pre-production tests on the new webserver, prior to migrating the sites, but some sites are failing with 500 Internal Server Error. The content, both databases and files, are mirrored from the old to the new server, so we can test if all sites work properly. I traced this problem to mod_alias' Redirect statement, which is used from .htaccess to redirect visitors and search engines from old content to new pages. Apparently the Apache server requires the destination to be a full url, including protocol and hostname. Redirect 301 /directory/ /target/ # Not Valid Redirect 301 /main.html / # Not Valid Redirect 301 /directory/ http://www.example.com/target/ # Valid Redirect 301 /main.html http://www.example.com/ # Valid This contradicts the Apache documentation for Apache 2.2, which states: The new URL should be an absolute URL beginning with a scheme and hostname, but a URL-path beginning with a slash may also be used, in which case the scheme and hostname of the current server will be added. Of course I verified that we're using Apache 2.2 on both the old and the new server. The old server is a Gentoo box with Apache 2.2.11, while the new one is a RHEL 5 box with Apache 2.2.3. The workaround would be to change all paths to full URL's, or to convert the statements to mod_rewrite rules, but I'd prefer the documented behaviour. What are your experiences?

  Read the article

• Firefox: Unload a tab manually

  - by unor

  Firefox has a setting "Don't load tabs until selected" (see How do I make Firefox 13 Load All My Tabs on Startup or when Resuming Reload). I like that behaviour. I am searching for a way to "deload"/deactivate a tab manually for a session (until I reload it). It should stop all running JavaScript functions and plugins (like Flash). The whole webpage content may disappear until I reload/re-activate the tab, but that is not a requirement. The title has to be displayed as tab label (like it is the case with the startup setting, too). The workaround would be to restart Firefox and don't switch to the tab I want to be deactivated. This is pretty annoying, of course. EDIT: Here is what I found so far (thanks, @bytebuster!) BarTab no longer being maintained (see why) BarTab Lite seems to miss this functionality from BarTab Dormancy experimental; comes with warning that it "may eat your session" Tab Mix Plus Feature request: Unload Tab feature Tab Utilites seems to offer this functionality only for automatic unloading Feature request: Add "unload tab" to tab context menu. UnloadTab removed from addons.mozilla.org (who knows why)

  Read the article

• Starting multiple Chrome full screen instances on multiple monitors from (batch) script

  - by Bob Groeneveld

  My goal is to show different web content full screen on multiple monitors automatically after booting from a single computer. The browser I would like to use is Chrome. If Chrome does not support this and Firefox does that would be fine. The OS I would prefer is Windows, if it turns out that Linux is possible that would be fine. On Windows it is possible to set the position of the Chrome browser window (--window-position=) and make Chrome start in full screen mode (--kiosk). Using these options combined you can start Chrome full screen on any of the desktops/screens that you have connected to your computer. I have managed to get this working. However, if I then try to do the same thing a second time to have Chrome full screen on a second screen the second Chrome window will open over the first window, no matter the coordinates I use for the --window-position parameter. I have tried using Chrome profiles and copying the Chrome directory and starting the second chrome.exe. All these things result in the same behaviour.

  Read the article

• Why doesn't Mail.app properly thread Microsoft Outlook replies?

  - by thepurplepixel

  I use Mail.app 3.6 (on 10.5 Leopard), and I always use plain-text email. Normally, when I receive an email reply from practically anyone, it looks like this (test message sent from Mail.app, replied from Hotmail, replied from Google Apps): Needless to say, I quite like this threading, and it keeps everything very visually-organized. However, when I receive a plain-text email reply from people on Microsoft Outlook (tested with Outlook 2003 & 2007), it isn't threaded like the image. Instead, it appears as below, without being threaded nicely. My reply to the message. -----Original Message----- From: Tyson Moore [mailto:[email protected]] Sent: [Date] To: [Receiver] Subject: Test Original message. Through looking at the source of my original message, it appears as though every time the message is quoted, less-than signs (<) are inserted before every line in the reply. I am assuming this is what triggers the quoting behaviour exhibited by Mail.app, but I'm no expert. My question: is this a Mail.app limitation in not recognizing the -----Original Message----- line put in by Outlook, or an Outlook problem not inserting > before every line in a reply (or both)?

  Read the article

• Generic/Text Printer on Windows 7 not prompting for file name

  - by Trevor Tippins

  Hope someone can shed some light on this. I am downloading reports from an AIX-based system by directing them to a TT printer which the terminal emulator (MultiView 2000) intercepts and directs to the default printer on the local system. This local printer is configured as a vanilla Generic/Text printer attached to a FILE port. When I print from AIX, the output is spooled down and the local printer prompts for a file name into which to save the file...but not under Windows 7. This has worked fine for many years, on both Win2K and WinXP. However, on Windows 7 the output gets spooled as a file into spool\PRINTERS (and looks as expected) but the print job then hangs with a status of "Error - Printing" and never prompts for a file name. I have to cancel the job. The Generic/Text printer works as expected with other applications. I have tried setting the printer to print directly rather than spooling but this only serves to hang the terminal session too. I've also tried to run the emulator in Windows 2000 Compatibility Mode and as Administrator in case it was something like that but with no luck. As you might expect, it does work fine in XP Mode (as long as I print to a printer defined therein and not the host's printer) but operationally this isn't going to be an option. Obviously this emulation software is a decade old (at least) and I could just cross/upgrade all the users (at a cost) but, before I do so, has anyone seen this sort of behaviour before and found some sort of fix? Remote OS: AIX 5 Client OS: Windows 7 Pro (32-bit) Printer: Generic/Text on a FILE port TE Software: MultiView 2000 (32-bit) Thanks in advance.

  Read the article

• GtkView GtkSpell and myspell backend

  - by justadreamer

  Hi I have an IM client pidgin. It is launched under locale ru_RU.UTF-8 Then when I type messages in GtkView widget it highlights the misspelled words. However it uses a GtkSpell which uses enchant, which uses myspell backend (I provided it with symlink to openoffice dictionaries folder /usr/share/enchant/myspell -- /usr/share/myspell/dict). Now the problem is that whichever language I use - it still uses ru_RU language to select the dictionary, so all english text is being underlined as a misspelled text. When I switch locale to en_US and then launch pidgin under it - then all russian text becomes misspelled. I don't like this behaviour as I use pidgin to chat in both languages. Is there a way to somehow setup enchant/myspell so that it searches in both dictionaries en_US and ru_RU independent of the locale I launched pidgin (GtkView) in ? I have Debian lenny/5.0.1 distro. enchant version 1.5.0. /usr/share/enchant/enchant.ordering looks like this: *:myspell meaning that for all languages backend is myspell myspell dictionary.lst file looks like this: DICT en GB en_GB DICT en US en_US THES en US th_en_US_v2 THES en GB th_en_US_v2 THES ru RU th_ru_RU_v2 DICT ru RU ru_RU DICT uk UA uk DICT ru RU en_US

  Read the article

• Server not accepting uploads

  - by Tatu Ulmanen

  I'm having a strange problem with my VPS: I can download files from it, I can use PuTTy to connect to it and all behaves normally. But sometimes, when I try to upload a file to the server or save a file via SFTP, the connection inexplicably fails. I am using jEdit to edit files remotely via SFTP. When it works, it works fine. When it doesn't, I get an error message: Cannot save: java.io.IOException: inputstream is closed Cannot save: java.io.IOException: 4: I can see that a temporary save file (#file.php#save#) is created on the server with a filesize of 0. So the connection works, but when it comes to sending the actual data, something fails. The same thing with WinSCP, but the error is different: Copying file fatally failed. Copying files to remote side failed. And I can always browse the server with PuTTy without a problem. I see nothing abnormal in any log files. Auth.log shows this when I try to save: sshd[32638]: Accepted password for - from - port 62272 ssh2 sshd[32638]: pam_unix(sshd:session): session opened for user - by (uid=0) sshd[32640]: subsystem request for sftp sshd[32638]: pam_unix(sshd:session): session closed for user - When I wait for a while (say, an hour), everything works fine again. It can't be a temporary ban, as I am still allowed to connect to the server, right? I know this may not be enough info to solve the problem, but I am grateful for any clues or bits of information that might help me. What are the possible causes for this kind of behaviour, what log files can I check for clues etc.. I'm running out of ideas!

  Read the article

• Connecting to unsecured wireless network

  - by Sanchez

  I would like to know what information is public and can be intercepted in a non-open, but unsecured wireless network. Moreover, is there anything I can do to make it more "secure", other than using https connection whenever possible. In more details, I recently discovered (with surprise) that the wireless network in my school is actually unsecured. Although not everyone can connect to it (you need a student ID), I am told that certain softwares like Wireshark would be able to intercept the data. Since I have been using the network for all private purposes (email, facebook etc), I do feel quite insecure now and would like to understand the situation a bit better. I installed Wireshark and tried to play with it but all I can see are something alien to me. In any case, all I see seems to come directly/indirectly from my IP address, and I have long thought that usually different computers in the same wireless network would be assigned different addresses. Am I wrong? If not, then I feel very confused about what information is actually being captured (potentially by other users in the network, since I don't think I could capture activities of others in the same network anyway), and whether it's safe to use the network at all. (Gambling on others in the same network showing good behaviour is apparently not an option.) Thank you.

  Read the article

• Linux disk usage analyser that acts like symlinks are real files

  - by Rory

  I am using git-annex, an extension to the DVCS git, which is designed for handling large files. It makes heavy use of symlinks. The actual large files are moved to the .git/annex directory and the original files are symlinked to there. I am running out of disk space, and need to clear up, and see what's using all my space. Usually I'd use a disk usage tool like ncdu, Baobab or Filelight. However they treat the symlink as essentially empty, and only count the file that it is pointing to as using any space. Which means when I use git-annex, it shows no space used in the main directories and lots of space used in the .git/annex directory. This is not helpful. Is there any (graphical or ncurses) based disk usage programme for linux (apt-get installable would be easie that is capable (through options or not) of counting a symlink as using up the space that the original file uses up? Many have options for different behaviour for hard links, so makes sense that some should h (I know counting symlinks as using space has flaws, like counting the space space twice, broken symlinks, etc. But that's OK for my purposes)

  Read the article

• Nginx fails upon proxying PUT requests

  - by PartlyCloudy

  Hi. I have an arbitrary web server that supports the full range of HTTP methods, including PUT for uploads. The server runs fine in all tests with different clients. I now wanted to set this server behind an nginx reverse proxy. However, each PUT request fails. The entity body is not forwarded to the backend web server. The header fields are sent, but not body. I searched the nginx proxy documentation and find several hints that PUT might not be supported. But I also found people running svn/ web dav stuff behind nginx, so it should work. Any ideas? Here is my config: server { listen 80; server_name my.domain.name; location / { proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass http://127.0.0.1:8000; } } Client == HTTP PUT ==> Nginx == HTTP Proxy ==> Backend Server The error.log shows no entries concerning this behaviour. Thanks in advance!

  Read the article

• How to send from my Z88 to my PC

  - by Bevan

  I've got a Cambridge Z88 that I want to get working with my PC. Around 6 years ago - in 2004 - I made heavy use of my Z88 to do a whole bunch of writing on the train while commuting to and from work. The Z88 is solid state, lightweight and has a full size silent keyboard, so it works very well as a writing instrument. I still have the serial cable I soldered up back then and used successfully in 2004. It has these connections: Z88 9 pin ----- ------- 2 TxD ------> RxD 2 3 RxD <------ TxD 3 7 GND <-----> GND 5 4 RTS ------> CTS 8 5 CTS <-+ RTS 7 8 DCD <-+---- DTR 4 9 DTR ----+-> DCD 1 +-> DSR 6 Unfortunately, I haven't been able to find my notes from 2004 that describe how I got it to work back then. I've spent several hours trying to Google a result, but to no avail. I'm pretty sure the cable is fine - after all, it's what I used successfully six years ago, and I've checked it out with a multimeter - so I'm focusing on the PC end of things, which is where I'd like some assistance. Q1: In my recent attempts, I've been using both Hyperterminal (as built into Windows XP) and the command line (copy com2: con:), but with no success. What's a good (better!) serial communications application to use? Is there one that allows me to see as deep as the signalling that's occurring on the wire? Q2: If you have a Z88 that works correctly with your PC, what software do you use on the PC end, and what's the pinout of your cable? I'm pretty sure that the Z88 itself is working properly: When using the built in Import/Export tool to send a file, I see different behaviour when my serial cable is connected compared to disconnected. When disconnected, the transmission appears to work, with a progress meter counting up and then finishing; when connected, nothing happens 'cept a timeout if I wait long enough.

  Read the article

• Merely installing PHP5 causes my AWS Ubuntu server to die minutes later from a massive CPU spike

  - by Mark Amery

  I have an AWS server with Ubuntu 11.04 as the OS that is running an Apache2 webserver (incidentally Python-based and using Django). We recently needed to add support for php5 to let us use a third party PHP library (incidentally for serving minified versions of js and css files). However, for no reason any of us can discern, if we simply run sudo apt-get install php5 on the server, then the install appears to finish successfully but, without us taking any further action (including not yet running sudo apt-get install libapache2-mod-php5, which I think would be the next step for us if everything worked), or actually running any PHP scripts on the server, a few minutes later the server becomes impossible to connect to, and looking at the 'Monitoring' tab for the server in the EC2 Management Console reveals that a while after the installation, CPU usage spikes to 100% and stays there permanently (until we reboot the server from the AWS Console). After rebooting, the server also reliably dies within a few (between 0 and 10) minutes. We restored the server to a pre-PHP state from an AMI Image, observed that it was stable, and then tried installing PHP5 again and observed the server die in exactly the same way, so we're pretty much certain that installing PHP5 is what causes the symptoms. What on earth could be causing this behaviour, and how can we get PHP installed on the server without it dying?

  Read the article

• Apache Virtual Host with directory aliases

  - by brechtvhb

  I'm trying to set up a dynamic virtual host in apache with a directory alias pointing to a difirent path for every domain. Here's what I'm trying to achive. Say I have 2 domains: * www.domain1.com * www.domein2.com I want both to point to the same index.php file (C:/cms/index.php). Now the hard part ... I want directories or certain file types to point to a diffirent path for each domain. Example: * www.domain1.com/layout -> C:/store/www.domain1.com/layout * www.domain2.com/layout -> C:/store/www.domain2.com/layout * www.domain1.com/image.png -> C:/store/www.domain1.com/image.png * www.domain2.com/image.png -> C:/store/www.domain2.com/image.png However the admin directory should point to the same path again for all sites * www.domain1.com/admin -> C:/cms/admin * www.domain2.com/admin -> C:/cms/admin Is there a way to achieve this kind of behaviour in apache 2.2 without having to create a virtualhost entry for each new domain?

  Read the article

• BSOD error 0x0000006B PROCESS1_INITIALIZATION_FAILED on boot

  - by DontCare4Free

  I reinstalled League of Legends because the patcher always gave me an error. However, out of complete stupidness I didn't uninstall the old installation first because I thought that it would simply replace the files. However, when the installer bar got to 100% it simply minimized. Then I closed the application from the task manager. I tried uninstalling it after a failed attempt to start it up. The same behavior as when I installed it. Then I tried reinstalling where it simply presented the InstallShield Modify/Repair/Remove menu and I selected repair. Nothing happened. Then I tried selecting Modify, then seeing that the only option (called DefaultFeature) was unchecked. Same behaviour as install/uninstall. After seeing that it still failed, I uninstalled again. And after that I deleted C:\Program Files (x86)\League of Legends manually. When I tried installing LoL again it still thought I had it, so I chose repair. This time something actually happened, but it installed the whole game to C:\Windows. Seeing what was going on I clicked cancel and then started it up to try uninstalling it. However, I got an error message about something not being registered and then the minimization to I decided to let it repair completely. Then I uninstalled it and it gave only the minimization. However, when I rebooted another application started up complaining about some library being absent. So I decided to do a system restore. After letting it complete I got a BSOD every time I tried starting up Windows normally or in safe mode. However, system recovery mode works, although the system recovery automatic repair does not fix it. After a bit of searching I found a Microsoft KB article about it (981833) and tried following the workaround instructions. Nothing happened. I am using Windows 7 Home Premium 64-bit and Ubuntu 10.04 LTS 64-bit installed with WUBI.

  Read the article

• Varnish does not start properly (crashes after startup) with no error messages

  - by Matthew Savage

  I am running Varnish (2.0.4 from the Ubuntu unstable apt repository, though I have also used the standard repository) in a test environment (Virtual Machines) on Ubuntu 9.10, soon to be 10.04. When I have a working configuration and the server starts successfully it seems like everything is fine, however if, for whatever reason, I stop and then restart the varnish daemon it doesn't always startup properly, and there are no errors going into syslog or messages to indicate what might be wrong. If I run varnish in debug mode (-d) and issue start when prompted then 7 times out of time it will run, but occasionally it will just shut down 'silently'. My startup command is (the $1 allows for me to pass -d to the script this lives in): varnishd -a :80 $1 \ -T 127.0.0.1:6082 \ -s malloc,1GB \ -f /home/deploy/mysite.vcl \ -u deploy \ -g deploy \ -p obj_workspace=4096 \ -p sess_workspace=262144 \ -p listen_depth=2048 \ -p overflow_max=2000 \ -p ping_interval=2 \ -p log_hashstring=off \ -h classic,5000009 \ -p thread_pool_max=1000 \ -p lru_interval=60 \ -p esi_syntax=0x00000003 \ -p sess_timeout=10 \ -p thread_pools=1 \ -p thread_pool_min=100 \ -p shm_workspace=32768 \ -p thread_pool_add_delay=1 and the VCL looks like this: # nginx/passenger server, HTTP:81 backend default { .host = "127.0.0.1"; .port = "81"; } sub vcl_recv { # Don't cache the /useradmin or /admin path if (req.url ~ "^/(useradmin|admin|session|sessions|login|members|logout|forgot_password)") { pipe; } # If cache is 'regenerating' then allow for old cache to be served set req.grace = 2m; # Forward to cache lookup lookup; } # This should be obvious sub vcl_hit { deliver; } sub vcl_fetch { # See link #16, allow for old cache serving set obj.grace = 2m; if (req.url ~ "\.(png|gif|jpg|swf|css|js)$") { deliver; } remove obj.http.Set-Cookie; remove obj.http.Etag; set obj.http.Cache-Control = "no-cache"; set obj.ttl = 7d; deliver; } Any suggestions would be greatly appreciated, this is driving me absolutely crazy, especially because its such an inconsistent behaviour.

  Read the article

• USB seems to pause system

  - by Marco van de Voort

  I've an application that does some simple measuring, for which it polls a few 100kbs several times a second (8-25 times) The behaviour is not really dependant on chipset (happens on several mobo's intel 965- P55) and OSes (XPsp3 and win7). Also the make of the USB keyboard doesn't seem to matter. I notice that sometimes when an USB kbd is plugged in, the system pauses for say 500-1000ms. (about 900-1000ms on disconnect, and 400-500 on the subsequent connect) It also happens for other USB devices (most notably mice and massstorage devices), but only the first time such device is connected to an installation. This disrupts the measurement and I really would like to get rid on this. I already tried to disable as much as possible. (powersave, teletubby mode (*) etc), and while this helped with the non-USB related disruptions of the measurement, it doesn't help with the USB related ones. (*) fyi, turning off themes (to resp. classic/non-aero), and turning off effects in system solved problems that occured when minimizing/maximizing the app. Any pointers to look into? I'm a bit stuck with this.

  Read the article

• Random server lag, no CPU/mem/pagefile usage

  - by Kev

  We have a fairly new server running Windows 2003 SP2, and the past few days we've noticed random slowdowns. When I'm logged into the server over remote desktop while this is happening, or if I'm physically sitting at the server logged in, suddenly everything becomes extremely laggy. Any UI element I try to interact with takes upwards of ten seconds to react, and then responds very slowly. Then a minute later everything is quite snappy again. During this, I have Task Manager minimized to the tray, and there's no CPU usage. I open it up right after this happens, and there's very little CPU usage on the graph, and no memory or pagefile usage above normal. (Normal being 1.5 GB free in the case of memory.) This is what I see logged into the server, and then users start calling saying things are slow, timing out, and failing--anything to do with our server. No events in the Event Viewer around the times this happens. The context I'm working in (last thing I clicked, etc.) seems different every time--different programs active, different combinations of programs open. Never anything particularly stressful (like adding an event entry to a Cobian Backup configuration, or editing text in TextPad, which has been exceptionally stable in my extensive usage of it.) I would've thought it was just the server, but a family member's home PC (entirely separate) running WinXPSP3 had the same thing happen to it last night a few times. Is this some new behaviour introduced by the latest Windows Updates? Either way, where do I even start to look when nothing seems to be chewing up resources?

  Read the article

• Server resolve issues not consistent

  - by bobthemac

  I am having some weird issues with my web server. It has a public ip address and is set-up on an openVZ virtual machine. Accessing in to the site works fine every time but when trying to access out from the server I can't always connect out. Sometimes I can connect out and resolve addresses, sometimes I can't. The issue is visible in both ssh when trying to do a wget command on Google; sometimes it works and I get the index.html page and sometimes I get nothing. The issue is more visible in wordpress where you can't view themes but after a few presses of the try again button you can then view them. I have searched google and found nothing about this issue. Does anyone here have any ideas what could be causing this strange behaviour? Ports 80 and 2222 are open for web and ssh. Failed 17:26:33.398412 IP 86.148.184.124.38445 > 176.9.36.252.http: Flags [.], ack 98383, win 632, options [nop,nop,TS val 3070086 ecr 323106946], length 0 [email protected]..|. $..-.P..,.e......x....... .....B8. Passed 17:30:00.179630 IP 146.90.206.241.50091 > 176.9.36.252.http: Flags [F.], seq 1, ack 1, win 115, options [nop,nop,TS val 13740559 ecr 323308537], length 0 [email protected]... $....P.w...x.....s(K..... .....EK. Thanks in advance

  Read the article

• xen + debian network after upgrade squeeze to wheeze

  - by rush

  I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

  Read the article

• Sending e-mail on behalf of our customer(s), with Postfix

  - by NathanE

  We send e-mail on behalf of our customers, via our own SMTP services. It's always been a problem for us because usually our "spoofing" of their source address results in the mails being caught in spam traps. This hasn't been a problem in the past due to the small volume and low importance of these mails that we sent. However this requirement has recently changed and we need to fix this issue. We realise that fundamentally our application is sending e-mail incorrectly, as per this post: Send email on behalf of clients However, we would like to resolve the problem at the SMTP server level. We have deployed a server running Postfix. Is it possible to have Postfix automatically adjust the mail headers so that we get this "Sent on behalf of" behaviour? I figure it should just be a case of Postfix noticing that the FROM address is the spoofed (i.e. a domain that is not mentioned in its config anywhere) and therefore inject/replace the appropriate headers to get the desired effect. Thanks.

  Read the article

• Joomla performance problems on AWS

  - by Bobby Jack

  I'm running a site on AWS with the following setup: Single m1.small instance (web server) Single RDS m1.small db Joomla 1.5 Generally, the site is performant, but is fairly low-traffic - say around 50-100 visits / hour. However, at peak time, we see about double that traffic. During peak time, pretty much every day: CPU usage on the web server slowly climbs to 100% CPU usage on the RDS server climbs quite quickly to about 30%, from an average of about 15 Database connections shoot up to about 140, from a normal average of about 2 or 3 The site is then occasionally unreachable, certainly according to pingdom monitoring. Does anyone recognise this behaviour? Can you point me in the right direction to begin investigating? Of course, RDS makes it difficult to do things like slow query logging, so I've started by regularly dumping the mysql process list into a file to see if there's anything I can spot there, but it would be good to have something more concrete to investigate. UPDATE At least, can someone confirm that I'm definitely right in saying that the level of traffic implies the problem must be a specific type of query taking way longer than it should to execute? This would happen if a table gets locked, and many queries need to write to it, right? For this very reason, I've already changed the __session table type to InnoDB.

  Read the article

• virtualized windows 2003 domain with CentOS 5.3 and poor connectivity

  - by Chris Gow

  Hi: I have a test lab set up running a virtualized windows 2003 domain on a CentOS 5.3(xen) host and am experiencing connectivity problems with guests running on other hosts that are part of the same domain. Here's the setup: On Computer A I have CentOS 5.3 running as the host and have virtualized windows 2003 servers for a primary domain controller, a backup domain controller and an exchange server. The primary domain controller also acts as a WINS and dns server. The windows domain appears on a separate subnet from my company's corporate network. Connectivity to any of the virtualized guests on Computer A is fine (remote desktop, ping, what have you). I have another host computer (Computer B) that also has a virtualized Windows 2003 server guest that is part of the same domain. However, connectivity to that guest is flaky at best. I continuously get at least 60% packet loss when I try to ping the guest, and due to that flakiness I can not access any of the services that it runs (remote desktop, web). Now here's the interesting part. It seems to affect only machines running on a different computer than the domain controller that are in the same domain. On Computer B there is another Windows 2003 guest that is not part of the test domain and is on my corporate network. There's no connectivity issues with that guest machine. The problem does not seem to be specific to Computer B either. I created a test VM on my local computer within the test domain and it exhibits the same behaviour as the guest in Computer B. A couple of items to note: - Host OS on both Computer A and B are the same CentOS 5.3 64 bit - Guest OS is Windows 2003 64 bit and 32 bit (the guest on Computer B is 32 bit) - Guest OSes are all up to date (as of Monday) - Host OS on Computer A was upgraded from CentOS 5.2 to 5.3 Update: Sorry I did not follow up with the comments from below. Computer A and B have been moved to their own dedicated switch and the problem has gone away. I'm not sure what the underlying problem(s) were though

  Read the article

• How to connect AD Explorer from Sysinternals to Global Catalog

  - by Oliver

  I'm using the sysinternals AD Explorer quite frequently to search and inspect an Active Directory without any big problems. But now i'd like to connect not only to a single AD Server. Instead i like to inspect the global catalog. If i enter within the AD Explorer connect dialog only the dns name of the machine (e.g. dns.to.domain.controller) that is serving the global catalog i only receive the concrete domain for which it is responsible, but not the whole forest (that's normal behaviour and expected by me). If i'm going to add the default port number (3268) for the global catalog in the form dns.to.domain.controller:3268 AD Explorer will simply crash without any further message. The global catalog itself works as expected under the given name and port number, cause our apache server use exactly this address and port number to authenticate some users. So any hints or tips to access the global catalog out of AD Explorer? Or there are any other nice tools like AD Explorer out there that doesn't have any problems to access the global catalog?

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >