Search Results

Search found 2733 results on 110 pages for '02 javafx'.

Page 86/110 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• Linux: find out what process is using all the RAM?

  - by Timur

  Before actually asking, just to be clear: yes, I know about disk cache, and no, it is not my case :) Sorry, for this preamble :) I'm using CentOS 5. Every application in the system is swapping heavily, and the system is very slow. When I do free -m, here is what I got: total used free shared buffers cached Mem: 3952 3929 22 0 1 18 -/+ buffers/cache: 3909 42 Swap: 16383 46 16337 So, I actually have only 42 Mb to use! As far as I understand, -/+ buffers/cache actually doesn't count the disk cache, so I indeed only have 42 Mb, right? I thought, I might be wrong, so I tried to switch off the disk caching and it had no effect - the picture remained the same. So, I decided to find out who is using all my RAM, and I used top for that. But, apparently, it reports that no process is using my RAM. The only process in my top is MySQL, but it is using 0.1% of RAM and 400Mb of swap. Same picture when I try to run other services or applications - all go in swap, top shows that MEM is not used (0.1% maximum for any process). top - 15:09:00 up 2:09, 2 users, load average: 0.02, 0.16, 0.11 Tasks: 112 total, 1 running, 111 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 4046868k total, 4001368k used, 45500k free, 748k buffers Swap: 16777208k total, 68840k used, 16708368k free, 16632k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND 3214 ntp 15 0 23412 5044 3916 S 0.0 0.1 0:00.00 17m ntpd 2319 root 5 -10 12648 4460 3184 S 0.0 0.1 0:00.00 8188 iscsid 2168 root RT 0 22120 3692 2848 S 0.0 0.1 0:00.00 17m multipathd 5113 mysql 18 0 474m 2356 856 S 0.0 0.1 0:00.11 472m mysqld 4106 root 34 19 251m 1944 1360 S 0.0 0.0 0:00.11 249m yum-updatesd 4109 root 15 0 90152 1904 1772 S 0.0 0.0 0:00.18 86m sshd 5175 root 15 0 90156 1896 1772 S 0.0 0.0 0:00.02 86m sshd Restart doesn't help, and, by they way is very slow, which I wouldn't normally expect on this machine (4 cores, 4Gb RAM, RAID1). So, with that - I'm pretty sure that this is not a disk cache, who is using the RAM, because normally it should have been reduced and let other processes to use RAM, rather then go to swap. So, finally, the question is - if someone has any ideas how to find out what process is actually using the memory so heavily?

  Read the article

• Firefox Blocklisting Java

  - by kreeves

  Recently, Mozilla decided to blocklist older versions of the Java plug-in. Unfortunately, this doesn't work well with some internal applications we are using. Does any know if there is a workaround? Perhaps a way to unblock the plug-in for certain domains? I've scoured Google. We're using the most up to date Firefox. Relevant blog post: http://blog.mozilla.com/addons/2012/04/02/blocking-java/

  Read the article

• change height in Android 2.2 LinearLayout in code

  - by Niro

  Im trying to change height of Layouts through the code without success. I've tried all of the examples i saw here and other site and my app just keep shutting down. xml code: <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:id="@+id/main_lay" android:orientation="vertical" tools:context=".MainActivity" > <LinearLayout android:id="@+id/layout_add" > </LinearLayout> <LinearLayout android:layout_width="fill_parent" android:layout_height="50dp" android:background="@color/green"> <ImageView android:layout_width="fill_parent" android:contentDescription="@string/desc" android:layout_height="45dp" android:layout_gravity="center_vertical|left" android:scaleType="fitStart" android:background="@color/orange" android:src="@drawable/logo" > </ImageView> </LinearLayout> </LinearLayout> Java code: main_layout=(LinearLayout)findViewById(R.id.main_lay); main_layout.setLayoutParams(new FrameLayout.LayoutParams(LayoutParams.MATCH_PARENT,LayoutParams.MATCH_PARENT)); main_layout.setBackgroundResource(R.color.white); layout_add = (LinearLayout) findViewById(R.id.layout_add); layout_add.setLayoutParams(new FrameLayout.LayoutParams(LayoutParams.FILL_PARENT,50 )); layout_add.setBackgroundResource(R.color.dark_grey); I cant understand what im doing wrong. I've tried different ways to fix it. The Backround setting is working fine. Thank you guys Niro This is the Logcat 12-09 16:12:39.007: E/AnalyticsSDKTest.cpp(6338): Time w/ UTC Offset: 2012-12-09 12-09 16:16:14.517: E/ActivityManager(121): fail to set top app changed! 12-09 16:16:14.547: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Consumer closed input channel or an error occurred. events=0x8 12-09 16:16:14.547: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Channel is unrecoverably broken and will be disposed! 12-09 16:16:18.071: E/PVWmdrmProxy(5716): binder died for component: ComponentInfo{com.pv.wmdrmservice/com.pv.wmdrmservice.PVWmdrmService} 12-09 16:16:18.161: E/AndroidRuntime(18911): FATAL EXCEPTION: main 12-09 16:16:18.161: E/AndroidRuntime(18911): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.nirosadvice.converter/com.nirosadvice.converter.MainActivity}: java.lang.RuntimeException: Binary XML file line #1: You must supply a layout_width attribute. 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1821) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:1842) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.access$1500(ActivityThread.java:132) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1038) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.os.Looper.loop(Looper.java:150) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:16:18.161: E/AndroidRuntime(18911): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:16:18.161: E/AndroidRuntime(18911): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:16:18.161: E/AndroidRuntime(18911): at dalvik.system.NativeStart.main(Native Method) 12-09 16:16:18.161: E/AndroidRuntime(18911): Caused by: java.lang.RuntimeException: Binary XML file line #1: You must supply a layout_width attribute. 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.content.res.TypedArray.getLayoutDimension(TypedArray.java:491) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.ViewGroup$LayoutParams.setBaseAttributes(ViewGroup.java:3684) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.ViewGroup$MarginLayoutParams.<init>(ViewGroup.java:3764) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.widget.FrameLayout$LayoutParams.<init>(FrameLayout.java:457) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.widget.FrameLayout.generateLayoutParams(FrameLayout.java:423) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.widget.FrameLayout.generateLayoutParams(FrameLayout.java:47) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.LayoutInflater.inflate(LayoutInflater.java:396) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.LayoutInflater.inflate(LayoutInflater.java:320) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.view.LayoutInflater.inflate(LayoutInflater.java:276) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.android.internal.policy.impl.PhoneWindow.setContentView(PhoneWindow.java:231) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.Activity.setContentView(Activity.java:1715) 12-09 16:16:18.161: E/AndroidRuntime(18911): at com.nirosadvice.converter.MainActivity.onCreate(MainActivity.java:87) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1072) 12-09 16:16:18.161: E/AndroidRuntime(18911): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:1785) 12-09 16:16:18.161: E/AndroidRuntime(18911): ... 11 more Thanks After Iv'e added the attributes to the XML - this is what i'm getting : CatLog: 12-09 16:42:33.168: E/AndroidRuntime(19065): FATAL EXCEPTION: main 12-09 16:42:33.168: E/AndroidRuntime(19065): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.View.measure(View.java:8526) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.View.measure(View.java:8526) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.View.measure(View.java:8526) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.os.Looper.loop(Looper.java:150) 12-09 16:42:33.168: E/AndroidRuntime(19065): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:42:33.168: E/AndroidRuntime(19065): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:42:33.168: E/AndroidRuntime(19065): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:42:33.168: E/AndroidRuntime(19065): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:42:33.168: E/AndroidRuntime(19065): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:42:33.168: E/AndroidRuntime(19065): at dalvik.system.NativeStart.main(Native Method) 12-09 16:42:39.023: E/AnalyticsSDKTest.cpp(6338): Time w/ UTC Offset: 2012-12-09 21:42:39-05:00 12-09 16:42:49.013: E/AndroidRuntime(19095): FATAL EXCEPTION: main 12-09 16:42:49.013: E/AndroidRuntime(19095): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.View.measure(View.java:8526) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.View.measure(View.java:8526) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.View.measure(View.java:8526) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.os.Looper.loop(Looper.java:150) 12-09 16:42:49.013: E/AndroidRuntime(19095): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:42:49.013: E/AndroidRuntime(19095): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:42:49.013: E/AndroidRuntime(19095): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:42:49.013: E/AndroidRuntime(19095): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:42:49.013: E/AndroidRuntime(19095): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:42:49.013: E/AndroidRuntime(19095): at dalvik.system.NativeStart.main(Native Method) 12-09 16:44:00.913: E/AndroidRuntime(19148): FATAL EXCEPTION: main 12-09 16:44:00.913: E/AndroidRuntime(19148): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.View.measure(View.java:8526) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.View.measure(View.java:8526) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.View.measure(View.java:8526) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.os.Looper.loop(Looper.java:150) 12-09 16:44:00.913: E/AndroidRuntime(19148): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:44:00.913: E/AndroidRuntime(19148): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:44:00.913: E/AndroidRuntime(19148): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:44:00.913: E/AndroidRuntime(19148): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:44:00.913: E/AndroidRuntime(19148): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:44:00.913: E/AndroidRuntime(19148): at dalvik.system.NativeStart.main(Native Method) 12-09 16:44:02.935: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Consumer closed input channel or an error occurred. events=0x8 12-09 16:44:02.935: E/InputDispatcher(121): channel '4056b9c8 com.nirosadvice.converter/com.nirosadvice.converter.MainActivity (server)' ~ Channel is unrecoverably broken and will be disposed! 12-09 16:45:25.075: E/AndroidRuntime(19210): FATAL EXCEPTION: main 12-09 16:45:25.075: E/AndroidRuntime(19210): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.View.measure(View.java:8526) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.View.measure(View.java:8526) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.View.measure(View.java:8526) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.os.Looper.loop(Looper.java:150) 12-09 16:45:25.075: E/AndroidRuntime(19210): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:45:25.075: E/AndroidRuntime(19210): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:45:25.075: E/AndroidRuntime(19210): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:45:25.075: E/AndroidRuntime(19210): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:45:25.075: E/AndroidRuntime(19210): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:45:25.075: E/AndroidRuntime(19210): at dalvik.system.NativeStart.main(Native Method) 12-09 16:50:34.507: E/AndroidRuntime(19358): FATAL EXCEPTION: main 12-09 16:50:34.507: E/AndroidRuntime(19358): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.View.measure(View.java:8526) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.View.measure(View.java:8526) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.View.measure(View.java:8526) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.os.Looper.loop(Looper.java:150) 12-09 16:50:34.507: E/AndroidRuntime(19358): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 16:50:34.507: E/AndroidRuntime(19358): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 16:50:34.507: E/AndroidRuntime(19358): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 16:50:34.507: E/AndroidRuntime(19358): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 16:50:34.507: E/AndroidRuntime(19358): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 16:50:34.507: E/AndroidRuntime(19358): at dalvik.system.NativeStart.main(Native Method) Third try - after changing the Frame to Linear : 12-09 17:42:39.076: E/AnalyticsSDKTest.cpp(6338): Time w/ UTC Offset: 2012-12-09 22:42:39-05:00 12-09 17:55:44.141: E/ActivityManager(121): Fix ANR:broadcast when App died 12-09 17:55:44.722: E/AndroidRuntime(19469): FATAL EXCEPTION: main 12-09 17:55:44.722: E/AndroidRuntime(19469): java.lang.ClassCastException: android.view.ViewGroup$LayoutParams 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.LinearLayout.measureVertical(LinearLayout.java:360) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.LinearLayout.onMeasure(LinearLayout.java:309) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.View.measure(View.java:8526) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.View.measure(View.java:8526) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewGroup.measureChildWithMargins(ViewGroup.java:3224) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.widget.FrameLayout.onMeasure(FrameLayout.java:250) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.View.measure(View.java:8526) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewRoot.performTraversals(ViewRoot.java:902) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.view.ViewRoot.handleMessage(ViewRoot.java:1957) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.os.Handler.dispatchMessage(Handler.java:99) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.os.Looper.loop(Looper.java:150) 12-09 17:55:44.722: E/AndroidRuntime(19469): at android.app.ActivityThread.main(ActivityThread.java:4263) 12-09 17:55:44.722: E/AndroidRuntime(19469): at java.lang.reflect.Method.invokeNative(Native Method) 12-09 17:55:44.722: E/AndroidRuntime(19469): at java.lang.reflect.Method.invoke(Method.java:507) 12-09 17:55:44.722: E/AndroidRuntime(19469): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 12-09 17:55:44.722: E/AndroidRuntime(19469): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 12-09 17:55:44.722: E/AndroidRuntime(19469): at dalvik.system.NativeStart.main(Native Method)

  Read the article

• West Palm Beach Developers&rsquo; Group June 2013 Meeting Recap &ndash; ASP.NET Web API and Web Sockets with Shervin Shakibi

  - by Sam Abraham

  Originally posted on: http://geekswithblogs.net/wildturtle/archive/2013/07/02/west-palm-beach-developersrsquo-group-june-2013-meeting-recap-ndash.aspxOur West Palm Beach Developers’ Group June 2013 meeting featured Shervin Shakibi, Microsoft Regional Director and Certified Trainer. Shervin spoke on the ASP.NET Web API and Web Sockets, two new features shipped along with ASP.NET MVC4. Talk was simply awesome and very interactive as Shervin answered many audience questions. Our event was sponsored by Steven Douglas Associates and hosted by PC Professor. Below are some photos of our event (Pardon my flash malfunction):   Shervin Presenting on the Web API A partial view of the standing-room only meeting.

  Read the article

• Virtual Brown Bag Recap: NuGet, PoshCode, Code Templates

  - by Brian Schroer

  "Virtual Brown Bag" anagrams: Roving Tuba Brawl Lawn Bug Vibrator Rubbing Two Larva Vulgar Rabbi Town A Vibrant Grub Owl Blurting a Bar Vow At this week's Roving Tuba Brawl Virtual Brown Bag meeting: Claudio Lassala asked "What does your work environment look like?" He and several others shared pictures. George Mauer talked about NuGet, .NET's answer to Ruby Gems, and PoshCode, a PowerShell code repository Claudio showed how he uses CodeRush templates to quickly generate unit test code Alan Stevens showed how to do the same thing with Resharper templates For detailed notes, links, and the video recording, go to the VBB wiki page: https://sites.google.com/site/vbbwiki/main_page/2010-12-02

  Read the article

• Silverlight Firestarter Wrap Up and WCF RIA Services Talk Sample Code

  - by dwahlin

  I had a great time attending and speaking at the Silverlight Firestarter event up in Redmond on December 2, 2010. In addition to getting a chance to hang out with a lot of cool people from Microsoft such as Scott Guthrie, John Papa, Tim Heuer, Brian Goldfarb, John Allwright, David Pugmire, Jesse Liberty, Jeff Handley, Yavor Georgiev, Jossef Goldberg, Mike Cook and many others, I also had a chance to chat with a lot of people attending the event and hear about what projects they’re working on which was awesome. If you didn’t get a chance to look through all of the new features coming in Silverlight 5 check out John Papa’s post on the subject. While at the Silverlight Firestarter event I gave a presentation on WCF RIA Services and wanted to get the code posted since several people have asked when it’d be available. The talk can be viewed by clicking the image below. Code from the talk follows as well as additional links. I had a few people ask about the green bracelet on my left hand since it looks like something you’d get from a waterpark. It was used to get us access down a little hall that led backstage and allowed us to go backstage during the event. I thought it looked kind of dorky but it was required to get through security. Sample Code from My WCF RIA Services Talk (To login to the 2 apps use “user” and “P@ssw0rd”. Make sure to do a rebuild of the projects in Visual Studio before running them.) View All Silverlight Firestarter Talks and Scott Guthrie’s Keynote WCF RIA Services SP1 Beta for Silverlight 4 WCF RIA Services Code Samples (including some SP1 samples) Improved binding support in EntitySet and EntityCollection with SP1 (Kyle McClellan’s Blog) Introducing an MVVM-Friendly DomainDataSource: The DomainCollectionView (Kyle McClellan’s Blog) I’ve had the chance to speak at a lot of conferences but never with as many cameras, streaming capabilities, people watching live and overall hype involved. Over 1000 people registered to attend the conference in person at the Microsoft campus and well over 15,000 to watch it through the live stream.  The event started for me on Tuesday afternoon with a flight up to Seattle from Phoenix. My flight was delayed 1 1/2 hours (I seem to be good at booking delayed flights) so I didn’t get up there until almost 8 PM. John Papa did a tech check at 9 PM that night and I was scheduled for 9:30 PM. We basically plugged in my laptop backstage (amazing number of servers, racks and audio devices back there) and made sure everything showed up properly on the projector and the machines recording the presentation. In addition to a dedicated show director, there were at least 5 tech people back stage and at least that many up in the booth running lights, audio, cameras, and other aspects of the show. I wish I would’ve taken a picture of the backstage setup since it was pretty massive – servers all over the place. I definitely gained a new appreciation for how much work goes into these types of events. Here’s what the room looked like right before my tech check– not real exciting at this point. That’s Yavor Georgiev (who spoke on WCF Services at the Firestarter) in the background. We had plenty of monitors to reference during the presentation. Two monitors for slides (right and left side) and a notes monitor. The 4th monitor showed the time and they’d type in notes to us as we talked (such as “You’re over time!” in my case since I went around 4 minutes over :-)). Wednesday morning I went back on campus at Microsoft and watched John Papa film a few Silverlight TV episodes with Dave Campbell and Ryan Plemons.   Next I had the chance to watch the dry run of the keynote with Scott Guthrie and John Papa. We were all blown away by the demos shown since they were even better than expected. Starting at 1 PM on Wednesday I went over to Building 35 and listened to Yavor Georgiev (WCF Services), Jaime Rodriguez (Windows Phone 7), Jesse Liberty (Data Binding) and Jossef Goldberg and Mike Cook (Silverlight Performance) give their different talks and we all shared feedback with each other which was a lot of fun. Jeff Handley from the RIA Services team came afterwards and listened to me give a dry run of my WCF RIA Services talk. He had some great feedback that I really appreciated getting. That night I hung out with John Papa and Ward Bell and listened to John walk through his keynote demos. I also got a sneak peak of the gift given to Dave Campbell for all his work with Silverlight Cream over the years. It’s a poster signed by all of the key people involved with Silverlight: Thursday morning I got up fairly early to get to the event center by 8 AM for speaker pictures. It was nice and quiet at that point although outside the room there was a huge line of people waiting to get in.     At around 8:30 AM everyone was let in and the main room was filled quickly. Two other overflow rooms in the Microsoft conference center (Building 33) were also filled to capacity. At around 9 AM Scott Guthrie kicked off the event and all the excitement started! From there it was all a blur but it was definitely a lot of fun. All of the sessions for the Silverlight Firestarter were recorded and can be watched here (including the keynote). Corey Schuman, John Papa and I also released 11 lab exercises and associated videos to help people get started with Silverlight. Definitely check them out if you’re interested in learning more! Level 100: Getting Started Lab 01 - WinForms and Silverlight Lab 02 - ASP.NET and Silverlight Lab 03 - XAML and Controls Lab 04 - Data Binding Level 200: Ready for More Lab 05 - Migrating Apps to Out-of-Browser Lab 06 - Great UX with Blend Lab 07 - Web Services and Silverlight Lab 08 - Using WCF RIA Services Level 300: Take me Further Lab 09 - Deep Dive into Out-of-Browser Lab 10 - Silverlight Patterns: Using MVVM Lab 11 - Silverlight and Windows Phone 7

  Read the article

• top Tweets SOA Partner Community – May 2012

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community BPMN2.0 Oracle notations poster from eaiesb http://wp.me/p10C8u-pu Torsten WinterbergLook out for new Oracle #BPM edition coming up soon: The Oracle BPM Standard edtion! Great news for easy entry, small licence fees. Yes! Danilo Schmiedel Had a great chat with customer yesterday about #OracleBPM. Next step will be a 5day event combining modeling and implementation @soacommunity Frank Nimphius Still reading "Oracle Business Process Management Suite 11g Handbook". Excellent resource for a non-SOA but ADF guy like me ;-) Oracle New webcast: Maximize #Oracle #WebLogic Server ROI with Oracle #Enterprise #Manager 12c on May 2 at 10 am PT. Register http://bit.ly/JFUrR9 OTNArchBeat@OTNArchBeat BPM in Financial Services Industry | Sanjeev Sharma http://bit.ly/HCCxui JDeveloper & ADF BPEL 11.1.1.6 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations http://dlvr.it/1V9SxR Oracle UPK & Tutor Collaborate Attendees: Visit the UPK demo pod, SIGS, and sessions: If you are attending Collaborate 2012 - Sun. http://bit.ly/J39z65 Heidi Buelow see #fmw track RT @demed: Are you going to #KSCOPE12 in San Antonio, June 24-28? http://kscope12.com/component/ seminar/seminarslist?topicsid=6 Use promo code Fusion for discount! Sabine Leitner #SIG #Middleware 15.05. Frankfurt #Oracle #DOAG Planung & Aufbau WebLogic Server #WLS http://bit.ly/HKsCWV @OracleWebLogic @soacommunity SOA Community MDS explorer by Red Samurai http://wp.me/p10C8u-pp Biemond &reg; Retrieve or set a HTTP header from Oracle BPEL: With Oracle SOA Suite 11g patch 12928372 you can finally retrie http://bit.ly/JejTHC Lucas Jellema Call for papers for UKOUG 2012 has opened: http://techandebs.ukoug.org /default.asp?p=9306 (deadline 1st of June) OTNArchBeat BPM API usage: List all BPM Processes for a user | Kavitha Srinivasan http://bit.ly/IJKVfj demed SOA, Cloud + Service Tech symposium (London, Sep 24-25) call for paper is open http://www.servicetechsymposium. com /call2012.php @techsymp #oraclesoa OracleBlogs Lessons learned configuring OER 11g Workflows http://ow.ly/1iMsKh OTNArchBeat Scripting WebLogic Admin Server Startup | Antony Reynolds http://bit.ly/IH5ciU orclateamsoa A-Team Blog #ateam: BPM API usage: List all BPM Processes for a user http://ow.ly/1iJADp Lucas Jellema Just blogged about our Live FMW Application Development show during OBUG 2012, next Tuesday 24th April in Maastricht: OracleBlogs OEG integration with OSB/OWSM - 11g http://ow.ly/1iKx7G SOA Community SOA Community Newsletter April 2012 http://wp.me/p10C8u-pl Frank DorstRT @whitehorsesnl: Whiteblog: BPM Process Spaces in Oracle Webcenter (Patch Set 5(http://bit.ly/Hxzh29) #soacommunity #bpm #oracle) David Shaffer The Advanced SOA suite training class next week in Redwood City is full! Learned a lot about accepting credit card payments. OTNArchBeat Running Built-In Test Simulator with SOA Suite Healthcare 11g in PS4 and PS5 | Shub Lahiri http://bit.ly/IgI8GN SOA Community Oracle Fusion Middleware Innovation Awards 2012, Call for Nominations #ofmaward #soa #bpm #soacommunity OTNArchBeat Updated SOA Documents now available in ITSO Reference Library http://bit.ly/I3Y6Sg Oracle Middleware Data Integrator & SOA - why 2 products better than one for integration? Webcast: Apr 24 10 AM PT http://bit.ly/IzmtKR Andrejus Baranovskis Red Samurai MDS Cleaner V2.0 http://fb.me/FxLVz82w SOA Community “@rluttikhuizen: Chapter 4 of SOA Made Simple book "Classification of Services" ready for collegial review” can #soacommunity get a preview? Xavier Verhaeghe #Gartner figures are out: #Oracle top in App Server market share (43.1%) and Relational #Database, too (48.8%) in 2011 Sabine Leitner WLS12c, Exa*, IDM, EM12c, DB @ Private, Public, Hybrid #Cloud Event 26.04. FFM #Oracle http://bit.ly/zcRuxi @OracleCloudZone @soacommunity Michel Schildmeijer@wlscommunity @MiddlewareMagic @OTNArchBeat @Oracle_Fusion Oracle WebLogic / SOA Suite 11g HACMP Cluster take-over http://lnkd.in/G78qMd Oracle Middleware Hear how ODI and SOA's unified approach are key to untangling your business. April 24 10AM PT http://bit.ly/IdcsUz #Oracle OTNArchBeat Using SAP Adapter with OSB 11g (PS3) | Shub Lahiri http://bit.ly/IswR9K SOA Community Integrating with Oracle Fusion Applications: Discovering Integration Artifacts https://blogs.oracle.com/governance /entry/integrating_with_oracle_fusion_ applications #soacommunity #oer #governance OracleBlogs Tuning B2B Server Engine Threads in SOA Suite 11g http://ow.ly/1iH5bx OracleBlogs Top Tweets SOA Partner Community April 2012 http://ow.ly/1iVHfA SOA Community Oracle SOA Suite 11g Database Growth Management http://wp.me/p10C8u-pi Sabine Leitner WLS12c,Exa*,IDM,EM12c, DB @ Private, Public, Hybrid #Cloud Event 24.04. München #Oracle http://bit.ly/zcRuxi @OracleCloudZone @soacommunity SOA Community Testing Business Rules by Mark Nelson http://redstack.wordpress.com/2012/ 04/18/testing-business-rules/ #soacommunity #soa #rules #oracle SOA CommunityTop Tweets SOA Partner Community - April 2012 http://wp.me/p10C8u-pn OTNArchBeat Webcast: Untangle Your Business with Oracle Unified SOA and Data Integration - April 24 http://bit.ly/IQexqT OTNArchBeat"Do more with SOA Integration: Best of Packt" contributors include @gschmutz, @llaszews, many others http://amzn.to/HVWwYt ServiceTechSymposium Symposium agenda page coming together - page launched today with keynotes, sessions to be added shortly. http://www.servicetechsymposium.com /agenda2012.php SOA Community Shipping Specialization plaques - congratulation #Fujitsu - request yours https://soacommunity.wordpress. com/2011/02/23/who-are-the-soa-experts-specialization-recognized-by-customers/ #soacommunity #OPN http://pic.twitter.com/YMRm2ion ServiceTechSymposium call for Presentations Submission Deadline Moved Up to May 21, 2012. Send your presentations submissions ASAP! ServiceTechSymposium Symposium Keynote by Vicente Navarro, European Space Agency, added to agenda: "SOA & Service-Orientation at the European Space Agency" SOA Community Running a large #soa project? Make sure you read - Oracle SOA Suite 11g Database Growth Management #soacommunity #opn SOA Community List all BPM Processes for a user by Yogesh l #bpm #oracle #soacommunity  For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity, twitter,Oracle,SOA Community,Jürgen Kress,OPN,SOA,BPM

  Read the article

• Refresh bounded taskflows across regions using Contextual Events

  - by raghu.yadav

  Usecases: 1) Data Change in left region inputText field reflect changes in right region using contextual event. example by Frank Nimphius :Value change event refresh across regions using Contextual Events 2) Select Tree node in left region reflects dependent detail form in right region using dynamic regions and Contextual Events. example by Frank Nimphius:Example6-RangeCtx.unzip More related examples: http://thepeninsulasedge.com/frank_nimphius/2008/02/07/adf-faces-rc-refreshing-a-table-ui-from-a-contextual-event/ http://www.oracle.com/technology/products/jdev/tips/fnimphius/generictreeselectionlistener/index.html http://www.oracle.com/technology/products/jdev/tips/fnimphius/syncheditformwithtree/index.html http://biemond.blogspot.com/2009/01/passing-adf-events-between-task-flow.html http://www.oracle.com/technology/products/jdev/tips/fnimphius/opentaskflowintab/index.html http://lucbors.blogspot.com/2010/03/adf-11g-contextual-event-framework.html http://thepeninsulasedge.com/blog/?cat=2 http://www.ora600.be/news/adf-contextual-events-11g-r1-ps1

  Read the article

• How do I know what Version of BizTalk is on my server?

  - by Paula DiTallo

  Originally posted on: http://geekswithblogs.net/AskPaula/archive/2013/07/02/153324.aspxThere are 2 ways to do this, the first is to query the BizTalkDBVersion table:use [BizTalkMgmtDb]goSELECT DatabaseMajor, DatabaseMinor,ProductBuildNumber, ProductRevision FROM dbo.BizTalkDBVersion;  Here is a list of possible BizTalk versions (CUP = cumulative update package, SP = service pack) :BTS20043.0.4902.0BTS2004SP13.0.6070.0BTS2004SP2 3.0.7405.0BTS2006 3.5.1602.0BTS2006R23.6.1404.0BTS20093.8.368.0BTS2010    3.9.469.0BTS2010CUP13.9.522.2BTS2010CUP23.9.530.2BTS2010CUP33.9.542.2BTS2010CUP43.9.545.2BTS2010CUP53.9.556.2BTS2013    3.10.229.0The second way is to follow these steps:Click Start, click Run, type regedt32, and then click OK.Once the window is up, navigate to  HKEY_LOCAL_MACHINE,  then SOFTWARE, then Microsoft, then BizTalk Server, and finally open 3.0.This is what you should see:

  Read the article

• Behaviour Driven Maturity Model

  - by Michael Stephenson

  Originally posted on: http://geekswithblogs.net/michaelstephenson/archive/2013/07/02/153326.aspxFor anyone who is interested I have written a small paper about the theory behind the BizTalk Maturity Assessment using a generic framework I have called the "Behaviour Driven Maturity Model" and then how it could be applied to the assessment of other subjects.The paper is on the following link:http://btsmaturity.blob.core.windows.net/behaviour-driven-model/Behaviour%20Based%20Maturity%20Model%20-%20Introduction.pdfIf you would like to create a model for a different subject area based on the details of this paper then I would encourage this as much as possible, all I ask is the following:1. Let us know your doing it so we can help tell people about each others activities2. Make it free to the community3. Reference back to BizTalkMaturity.com as the source of your model

  Read the article

• Annoying security "feature" in Windows 2008 R2 burns me, but not DVD's

  - by Stan Spotts

  This stuff drives me nuts. I'm all for hardening servers, and reducing security footprints, but I always want the option to allow me to get work done versus securing my system. I use Windows Server 2008 R2 as my laptop OS for a number of reasons I don't need to review here. It's pimped out to work like Windows 7 for most things. But my DVD writer is crippled, and evidently it's on purpose: http://blogs.technet.com/askcore/archive/2010/02/19/windows-server-2008-r2-no-recording-tab-for-cd-dvd-burner.aspx I don't WANT to log in as the local administrator to burn a damned DVD.  WTF isn't this configurable through the registry, or better yet, group policy? There are no security settings that I should not have the option to enable or disable.

  Read the article

• Windows Phone Resources from //BUILD 2013 Conference by Lee Stott

  - by Nikita Polyakov

  Originally posted on: http://geekswithblogs.net/campuskoder/archive/2013/07/02/153320.aspxLee Stott has a great summary blog post with all of the videos from the //BUILD 2013 conference that just happened last week. It’s nice because filtering to this event and finding Windows Phone sessions on Channel9 is not the best and this is a great snap shot of all of the sessions you can view from the conference in one page. Also shows that Microsoft although focused on Windows 8.1 at this event, still had a sizable presence of Windows Phone Developer topics at this event. Read the full blog post here: http://blogs.msdn.com/b/uk_faculty_connection/archive/2013/07/01/build-2013-windows-phone-resources.aspx

  Read the article

• What principles does your software engineering or development organization follow?

  - by user11347

  What principles does your software engineering or development organization follow? I am very interested in seeing a list of principles from someone who works at a company where these principles are discussed, published, followed, etc. The closest I have seen to a principles-based engineering organization are companies which are agile and follow the agile principles. Here is a list of Marick's values/challenges: http://www.agilejourneyman.com/2010/02/4-challenges-and-5-guiding-values-of.html I am looking for pointers to more stuff like this. Ideally, I'd like to hear from people who have actually implemented a principles-based approach in their organization.

  Read the article

• Dlink DWA-556 Access point fails to start on 2.6.35-25 while 2.6.35-24 works. How can I do this with >2.6.35-24?

  - by Azendale

  I'm using hostapd to run an access point with a Dlink DWA-556 wireless N card. However, I can no longer get it to start when I use kernels greater than 2.6.35-24. Here's a log where I ran the uname -a&&hostapd -c <configfile> on the different kernel versions. Linux erikbandersen 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Flushing old station entries Deauthenticate all stations Using interface wlan1 with hwaddr 1c:bd:b9:d5:e8:3c and ssid 'erikbandersen.com/freewifi' wlan1: Setup of interface done. MGMT (TX callback) ACK Malformed netlink message: len=436 left=256 plen=420 256 extra bytes in the end of netlink message MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb mgmt::auth authentication: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authentication OK (open system) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-AUTHENTICATE.indication(3c:4a:92:0e:41:2f, OPEN_SYSTEM) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) authentication reply: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=2 resp=0 (IE len=0) MGMT (TX callback) ACK mgmt::auth cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authenticated mgmt::assoc_req association request: STA=3c:4a:92:0e:41:2f capab_info=0x421 listen_interval=10 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 HT: STA 3c:4a:92:0e:41:2f HT Capabilities Info: 0x102c handle_assoc STA 3c:4a:92:0e:41:2f - no greenfield, num of non-gf stations 1 handle_assoc STA 3c:4a:92:0e:41:2f - 20 MHz HT, num of 20MHz HT STAs 1 hostapd_ht_operation_update current operation mode=0x0 hostapd_ht_operation_update new operation mode=0x7 changes=2 new AID 1 wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: association OK (aid 1) MGMT (TX callback) ACK mgmt::assoc_resp cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: associated (aid 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-ASSOCIATE.indication(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f RADIUS: starting accounting session 4DAC8224-00000000 MGMT (TX callback) ACK mgmt::action cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb Signal 2 received - terminating wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DEAUTHENTICATE.indication(3c:4a:92:0e:41:2f, 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) Removing station 3c:4a:92:0e:41:2f hostapd_ht_operation_update current operation mode=0x7 hostapd_ht_operation_update new operation mode=0x0 changes=2 Flushing old station entries Deauthenticate all stations . Linux erikbandersen 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=27 dBm HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Could not set channel for kernel driver wlan1: Unable to setup interface. My wireless card is listed as 02:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) by lspci. Am I doing it wrong and there's a new way of doing it? I'm holding off upgrading to Natty because of this. What changed between the versions that would cause this? Should I report it as a bug?

  Read the article

• Talend Enterprise Data Integration overperforms on Oracle SPARC T4

  - by Amir Javanshir

  The SPARC T microprocessor, released in 2005 by Sun Microsystems, and now continued at Oracle, has a good track record in parallel execution and multi-threaded performance. However it was less suited for pure single-threaded workloads. The new SPARC T4 processor is now filling that gap by offering a 5x better single-thread performance over previous generations. Following our long-term relationship with Talend, a fast growing ISV positioned by Gartner in the “Visionaries” quadrant of the “Magic Quadrant for Data Integration Tools”, we decided to test some of their integration components with the T4 chip, more precisely on a T4-1 system, in order to verify first hand if this new processor stands up to its promises. Several tests were performed, mainly focused on: Single-thread performance of the new SPARC T4 processor compared to an older SPARC T2+ processor Overall throughput of the SPARC T4-1 server using multiple threads The tests consisted in reading large amounts of data --ten's of gigabytes--, processing and writing them back to a file or an Oracle 11gR2 database table. They are CPU, memory and IO bound tests. Given the main focus of this project --CPU performance--, bottlenecks were removed as much as possible on the memory and IO sub-systems. When possible, the data to process was put into the ZFS filesystem cache, for instance. Also, two external storage devices were directly attached to the servers under test, each one divided in two ZFS pools for read and write operations. Multi-thread: Testing throughput on the Oracle T4-1 The tests were performed with different number of simultaneous threads (1, 2, 4, 8, 12, 16, 32, 48 and 64) and using different storage devices: Flash, Fibre Channel storage, two stripped internal disks and one single internal disk. All storage devices used ZFS as filesystem and volume management. Each thread read a dedicated 1GB-large file containing 12.5M lines with the following structure: customerID;FirstName;LastName;StreetAddress;City;State;Zip;Cust_Status;Since_DT;Status_DT 1;Ronald;Reagan;South Highway;Santa Fe;Montana;98756;A;04-06-2006;09-08-2008 2;Theodore;Roosevelt;Timberlane Drive;Columbus;Louisiana;75677;A;10-05-2009;27-05-2008 3;Andrew;Madison;S Rustle St;Santa Fe;Arkansas;75677;A;29-04-2005;09-02-2008 4;Dwight;Adams;South Roosevelt Drive;Baton Rouge;Vermont;75677;A;15-02-2004;26-01-2007 […] The following graphs present the results of our tests: Unsurprisingly up to 16 threads, all files fit in the ZFS cache a.k.a L2ARC : once the cache is hot there is no performance difference depending on the underlying storage. From 16 threads upwards however, it is clear that IO becomes a bottleneck, having a good IO subsystem is thus key. Single-disk performance collapses whereas the Sun F5100 and ST6180 arrays allow the T4-1 to scale quite seamlessly. From 32 to 64 threads, the performance is almost constant with just a slow decline. For the database load tests, only the best IO configuration --using external storage devices-- were used, hosting the Oracle table spaces and redo log files. Using the Sun Storage F5100 array allows the T4-1 server to scale up to 48 parallel JVM processes before saturating the CPU. The final result is a staggering 646K lines per second insertion in an Oracle table using 48 parallel threads. Single-thread: Testing the single thread performance Seven different tests were performed on both servers. Given the fact that only one thread, thus one file was read, no IO bottleneck was involved, all data being served from the ZFS cache. Read File ? Filter ? Write File: Read file, filter data, write the filtered data in a new file. The filter is set on the “Status” column: only lines with status set to “A” are selected. This limits each output file to about 500 MB. Read File ? Load Database Table: Read file, insert into a single Oracle table. Average: Read file, compute the average of a numeric column, write the result in a new file. Division & Square Root: Read file, perform a division and square root on a numeric column, write the result data in a new file. Oracle DB Dump: Dump the content of an Oracle table (12.5M rows) into a CSV file. Transform: Read file, transform, write the result data in a new file. The transformations applied are: set the address column to upper case and add an extra column at the end, which is the concatenation of two columns. Sort: Read file, sort a numeric and alpha numeric column, write the result data in a new file. The following table and graph present the final results of the tests: Throughput unit is thousand lines per second processed (K lines/second). Improvement is the % of improvement between the T5140 and T4-1. Test T4-1 (Time s.) T5140 (Time s.) Improvement T4-1 (Throughput) T5140 (Throughput) Read/Filter/Write 125 806 645% 100 16 Read/Load Database 195 1111 570% 64 11 Average 96 557 580% 130 22 Division & Square Root 161 1054 655% 78 12 Oracle DB Dump 164 945 576% 76 13 Transform 159 1124 707% 79 11 Sort 251 1336 532% 50 9 The improvement of single-thread performance is quite dramatic: depending on the tests, the T4 is between 5.4 to 7 times faster than the T2+. It seems clear that the SPARC T4 processor has gone a long way filling the gap in single-thread performance, without sacrifying the multi-threaded capability as it still shows a very impressive scaling on heavy-duty multi-threaded jobs. Finally, as always at Oracle ISV Engineering, we are happy to help our ISV partners test their own applications on our platforms, so don't hesitate to contact us and let's see what the SPARC T4-based systems can do for your application! "As describe in this benchmark, Talend Enterprise Data Integration has overperformed on T4. I was generally happy to see that the T4 gave scaling opportunities for many scenarios like complex aggregations. Row by row insertion in Oracle DB is faster with more than 650,000 rows per seconds without using any bulk Oracle capabilities !" Cedric Carbone, Talend CTO.

  Read the article

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• Can't connect to Wired Network after installing 12.04

  - by ezz9

  I have installed 12.04 into a used HP Compaq DC 7100 CMT. Plugged in LAN cable into the computer and it says network disconnected. from what I understand on the things I've read, it's not getting the address right, maybe it's just a guess (hardware address 00:16:35:78:47:bb). I know the LAN cable is working I can get on the net with the old computer. (Old computer is using device MAC address; Auto eth0 00:11:11:E6:4F:FE). I have put this address into the newer HP and it shows last used (minutes ago) but no Internet sever not found. I tried the hardware address it says never. I feel and think this should be easy to fix. But I just don't know. Here is the info everyone has asked for, but they never say what I should do. sudo lshw -C network; rfkill list; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; uname -a; ifconfig; route -n *-network description: ethernet interface product; NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:40:00.0 logical name: eth0 verson: 01 serial: 00:16:35:78:47:bb size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000-fd configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 duplex=full firmware=5751-v3.29a latency=0 link=yes multicast=yes port=twi sted pair speed=100Mbit/s resources: irq:17 memory:f0400000-f040ffff auto lo iface lo inet loopback DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION= "Ubuntu 12.04 LTS" 00:00.0 host bridge [0600]: Inter Corporation 82915G/P/GV/GL/PL/910GL Memory Con troller Hub [8086:2580] (rev 04) 00.02.0 VGA compatible controller [0300]: Intel Corporation 82915G/GV/910GL inte grated Graphics Controller [8086:2582] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 03) 00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #1 [8086:2658] (rev 03) 00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #2 [8086:2659] (rev 03) 00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #3 [8086:265a] (rev 03) 00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB UHCI #4 [8086:265b] (rev 03) 00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Fam ily) USB2 UHCI Controller [8086:265c] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI bridge [8086:244e] (rev d 3) 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/ FRW (ICH6 Family) AC'97 Autio conrtroller [8086:266e] (rev 03) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/RF (ICH6/ICH6R) LPC Interfa ce Bridge [8086:2640] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 fami ly) IDE Controller [8086:266f] (rev 03) 00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Con troller [8086:2651] (rev 03) 40:00.0 Ethernet controller [0200]: Broadcom Corporation NetXreme BCM5751 Gigab it Ethernet PCI Express [14e4:1677} (rev 01) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Linux bob-desktop 3.2.0-23-generic-pae #36-Ubuntu SMP Tpr 10 22:19:09 UTC 20 12 i686 i686 i386 GNU/Linux eth0 Link encap:Ethernet HWaddr 00:16:35:78:47:bb inet6 addr: fe80::216:35ff:47bb/64 Scope:link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2517 errors:0 dropped:0 overruns:0 frame:0 TX packets:164 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164508 (164.5 KB) TX bytes: 40884 (40.0 KB) Interrupt:17 lo Link encap:Local loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3290 errors:0 dropped:0 overruns:0 frame:0 TX packets:3290 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen: 0 RX bytes:267212 (267.2 KB) TX bytes: 267212 (267.2 KB) Kernel Ip routing table Destination Gateway Genmask Flags Metric Ref Use Iface ran this sudo dhclient eth0 no reply ran this ip addr 1: lo <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST ,MULTICAST ,UP ,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/enter 00:16:35:78:47:BB brd ff:ff:ff:ff:ff:ff inet 169.254.7.172/16 brd 169.254.255.255 scope link eth0:avahi inet6 fe80::216:35ff:fe78:47bb/64 scope link valid_lft forever preferred_lft forever Help please.

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• MP4 files show up but won't stream to xbox 360

  - by Greg

  I set up a basic media server to stream to my 360 using uShare. Here are the instructions I used: http://linuxexpresso.wordpress.com/2011/01/02/howto-ubuntu-upnp-server-to-xbox-360/. I can stream avi files fine but I cannot stream mp4s. When I go to videos on the xbox, I can see all of the videos and folders but when I click play for an mp4 nothing happens. On my ubuntu desktop I can click on the mp4 file and it plays fine. And if I take that file, stick it on a thumb drive and plug it directly into the xbox the mp4 will play off the thumb drive. I'm lost for why it won't work through ushare. Any ideas?

  Read the article

• Skype support and dead parrot sketches

  - by Greg Low

  We as an industry have a lot to answer for. One thing is the level of support provided for users. Here's the conversation I'm having with Skype right now. It feels like being in a Monty Python skit. I was really hoping that when Microsoft purchased Skype that things might improve. 8:33:44 PM greglowInitial Question/Comment: Subscriptions (Unlimited Country, Unlimited Europe, Unlimited Region, Unlimited World)8:33:44 PM SystemThank you for contacting Skype Customer Support!8:33:49 PM SystemDonna Faye has joined this session!8:33:50 PM SystemConnected with Donna Faye8:33:50 PM SystemThank you for contacting Skype Customer Support!8:33:54 PM SystemPlease hold for the next available Live Support Agent.8:33:59 PM Donna FayeHello! Welcome to Skype Live Support! My name is Donna L. How may I help you?8:34:09 PM greglowI've got a subscription (skypename greglow)8:34:21 PM greglowIt's set to auto-renew8:34:45 PM greglowWhy have I been getting messages about my Skype number expiring, if it's set to renew automatically8:34:54 PM greglowand has recently renewed automatically8:35:09 PM Donna FayeThank you for the information.8:35:29 PM Donna FayeTo better assist you may I know your Skype name, please?8:35:37 PM greglowgreglow8:35:44 PM Donna FayeThank you.8:36:14 PM Donna FayeI understand your concern that you receive an email notification stating that your calling subscription will about to expire. Am I right?8:36:43 PM greglowNo, I got an email telling me that one of my Skype numbers was going to expire8:37:08 PM greglowWhen I went to the website, it said it was part of the subscription and the subscription was set to auto-renew8:37:18 PM greglowThe subscription auto-renewed on Oct XXth8:37:24 PM greglowBut the number still expired8:37:43 PM greglowWhen I logged on today, it said that the number had expired and that I had 52 days left to reactivate it8:37:58 PM greglowI did that but am trying to understand why that happens at all8:38:36 PM greglowWhy do you expire numbers that are part of auto-renewing subscriptions?8:39:49 PM Donna FayeUpon checking your account, your calling subscription link to three Online Numbers.8:39:55 PM greglowcorrect8:40:10 PM greglowbut until an hour or so ago, one of them had expired. why?8:40:54 PM Donna FayeLet me explain to you that now Online Number are detach to a calling subscription unlike before it was attach to the calling subscription so therefore each Online Number will recur individually.8:41:29 PM Donna FayeUpon checking your account it shows that all your Online Number will expire on October XX, 20138:41:44 PM Donna FayeIf you don't want to be charged again for you can cancel it anytime.8:41:59 PM greglowI have set it to charge automatically8:42:06 PM greglowso why do the numbers expire?8:42:32 PM Donna FayeNo they are not expired they are all active.8:42:33 PM greglowif there is an automatic payment set up, why does anything expire?8:42:52 PM greglowyes, but one of them was expired, and I only fixed it a few hours ago8:43:07 PM greglowI'm trying to understand why it expired8:44:54 PM Donna FayeThe email you got just notify you that you should have good enough funding source of your calling subscription and Online Number in order for this to recur.8:45:12 PM greglowAgreed. I did that but the number still expired. Why?8:45:38 PM Donna FayeHowever do not worry on this hence all Online Number are active and not expired.8:45:41 PM greglowWhen I logged on today it said that the number had expired and that I had 52 days left to reactivate it. Why did that happen?8:46:14 PM Donna FayeMay I know the Online Number you are pertaining, please?The number that had expired was (07) XXXX XXXX (Australia)8:49:19 PM Donna FayeOkay, do not worry on this Online Number because this will expire on October XX, 2013.8:49:38 PM Donna FayeThank you for all the information.8:49:46 PM greglowI understand that it won't expire now until next year. I'm trying to understand why it stopped working this time8:49:51 PM greglowso I can avoid that next time8:50:39 PM Donna FayeWhat do yo stop working, you mean that Online Number is unable to be reach out?8:50:59 PM Donna Faye*what do you mean by stop working8:51:18 PM greglowThe Skype number +61 7 XXXX XXXX stopped working because it expired8:51:32 PM Donna FayeNo, this into expired.8:51:34 PM greglowI'm trying to understand why it expired8:51:50 PM greglowSorry I don't follow "this into expired"8:52:39 PM Donna FayeLet me inform you that this Online Number is not expired.8:52:54 PM Donna FayePlease disregard the notification you see on your Skype account.8:53:02 PM greglowSorry, this is getting very frustrating. I already told you I fixed it today. I want to know why it happened.8:53:20 PM Donna FayeHence I can rest assured you that this is active until October XX, 2013.8:53:21 PM greglowSo I can avoid it happening again, on this account, or on our other accounts8:53:34 PM greglowCan I speak to someone who really understands this please?Donna FayeSkype send a notification to Skype users for their Skype product in order for them to be aware the expiration of your product however your Online Number still active on your account hence when your calling subscription Unlimited World recur your Online Number also recur. 8:57:59 PM Donna Faye I do apologize for this matter, please allow me to resolve this issue for you. 9:02:48 PM greglow My question is still the same: if it's set to auto-pay, why did it expire? 9:03:50 PM greglow Why did it stop working? Why did I have to "reactivate" it? 9:04:08 PM greglow Why didn't it just keep working if it's set to auto-pay? 9:04:30 PM greglow This isn't a difficult concept 9:04:34 PM Donna Faye Let me clarify to you that this is not the really expired what is emphasizing on this is when you don't have good enough funding source when you calling subscription recur the Online Number will possibly expired but seem that you have a good funding source then this will continue until 2013. 9:05:10 PM greglow When I logged on today, it was not working, and your website said it had expired and that I had 52 days left to reactivate it 9:05:17 PM greglow Why?and so on, and so on, and so on.... 

  Read the article

• High level project workflow

  - by user775060

  We are a small software company trying our hand at our second game. Since our first games' process was a living nightmare (since we used webdevelopment workflow) I have decided to educate myself on how to manage a game project on a high level. How does your process work, from idea to launch? Preferably in situations where you have a team that needs to cooperate. I've seen these 2 links, which are useful in a way, but was wondering if there are better/more comprehensive ways to do this? http://www.goodcontroller.com/blog/?p=136 http://gogogic.wordpress.com/2009/02/09/symbol6-how-we-created-an-iphone-game/ All input would be infinitely appreciated.

  Read the article

• How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

  - by Dave B.

  I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

  Read the article

• HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

  - by Marek L.

  I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

  Read the article

• TFS API Add Favorites programmatically

  - by Tarun Arora

  01 – What are we trying to achieve? In this blog post I’ll be showing you how to add work item queries as favorites, it is also possible to use the same technique to add build definition as favorites. Once a shared query or build definition has been added as favorite it will show up on the team web access.  In this blog post I’ll be showing you a work around in the absence of a proper API how you can add queries to team favorites. 02 – Disclaimer There is no official API for adding favorites programmatically. In the work around below I am using the Identity service to store this data in a property bag which is used during display of favorites on the team web site. This uses an internal data structure that could change over time, there is no guarantee about the key names or content of the values. What is shown below is a workaround for a missing API. 03 – Concept There is no direct API support for favorites, but you could work around it using the identity service in TFS.  Favorites are stored in the property bag associated with the TeamFoundationIdentity (either the ‘team’ identity or the users identity depending on if these are ‘team’ or ‘my’ favorites).  The data is stored as json in the property bag of the identity, the key being prefixed by ‘Microsoft.TeamFoundation.Framework.Server.IdentityFavorites’. References - Microsoft.TeamFoundation.WorkItemTracking.Client - using Microsoft.TeamFoundation.Client; - using Microsoft.TeamFoundation.Framework.Client; - using Microsoft.TeamFoundation.Framework.Common; - using Microsoft.TeamFoundation.ProcessConfiguration.Client; - using Microsoft.TeamFoundation.Server; - using Microsoft.TeamFoundation.WorkItemTracking.Client; Services - IIdentityManagementService2 - TfsTeamService - WorkItemStore 04 – Solution Lets start by connecting to TFS programmatically // Create an instance of the services to be used during the program private static TfsTeamProjectCollection _tfs; private static ProjectInfo _selectedTeamProject; private static WorkItemStore _wis; private static TfsTeamService _tts; private static TeamSettingsConfigurationService _teamConfig; private static IIdentityManagementService2 _ids; // Connect to TFS programmatically public static bool ConnectToTfs() { var isSelected = false; var tfsPp = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPp.ShowDialog(); _tfs = tfsPp.SelectedTeamProjectCollection; if (tfsPp.SelectedProjects.Any()) { _selectedTeamProject = tfsPp.SelectedProjects[0]; isSelected = true; } return isSelected; } Lets get all the work item queries from the selected team project static readonly Dictionary<string, string> QueryAndGuid = new Dictionary<string, string>(); // Get all queries and query guid in the selected team project private static void GetQueryGuidList(IEnumerable<QueryItem> query) { foreach (QueryItem subQuery in query) { if (subQuery.GetType() == typeof(QueryFolder)) GetQueryGuidList((QueryFolder)subQuery); else { QueryAndGuid.Add(subQuery.Name, subQuery.Id.ToString()); } } }   Pass the name of a valid Team in your team project and a name of a valid query in your team project. The team details will be extracted using the team name and query GUID will be extracted using the query name. These details will be used to construct the key and value that will be passed to the SetProperty method in the Identity service.           Key           “Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..<TeamProjectURI>.<TeamId>.WorkItemTracking.Queries.<newGuid1>”           Value           "{"data":"<QueryGuid>","id":"<NewGuid1>","name":"<QueryKey>","type":"Microsoft.TeamFoundation.WorkItemTracking.QueryItem”}"           // Configure a Work Item Query for the given team private static void ConfigureTeamFavorites(string teamName, string queryName) { _ids = _tfs.GetService<IIdentityManagementService2>(); var g = Guid.NewGuid(); var guid = string.Empty; var teamDetail = _tts.QueryTeams(_selectedTeamProject.Uri).FirstOrDefault(t => t.Name == teamName); foreach (var q in QueryAndGuid.Where(q => q.Key == queryName)) { guid = q.Value; } if(guid == string.Empty) { Console.WriteLine("Query '{0}' - Not found!", queryName); return; } var key = string.Format( "Microsoft.TeamFoundation.Framework.Server.IdentityFavorites..{0}.{1}.WorkItemTracking.Queries{2}", new Uri(_selectedTeamProject.Uri).Segments.LastOrDefault(), teamDetail.Identity.TeamFoundationId, g); var value = string.Format( @"{0}""data"":""{1}"",""id"":""{2}"",""name"":""{3}"",""type"":""Microsoft.TeamFoundation.WorkItemTracking.QueryItem""{4}", "{", guid, g, QueryAndGuid.FirstOrDefault(q => q.Value==guid).Key, "}"); teamDetail.Identity.SetProperty(IdentityPropertyScope.Local, key, value); _ids.UpdateExtendedProperties(teamDetail.Identity); Console.WriteLine("{0}Added Query '{1}' as Favorite", Environment.NewLine, queryName); }   If you have any questions or suggestions leave a comment. Enjoy!

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >